A lamentable oversight on my part meant that when PostgresVersion.pm was
added in commit 4c4eaf3d provision to install it was not added to the
Makefile, so it was not installed along with the other perl modules.

"typename" is a C++ keyword, so pg_upgrade.h fails to compile in C++.
Fortunately, there seems no likely reason for somebody to need to
do that.  Nonetheless, it's project policy that all .h files should
pass cpluspluscheck, so rename the argument to fix that.

Oversight in 57c081de; back-patch as that was.  (The policy requiring
pg_upgrade.h to pass cpluspluscheck only goes back to v12, but it
seems best to keep this code looking the same in all branches.)

Older versions of perl on Windows don't like the list form of pipe open,
and perlcritic doesn't like the string form of open, so we avoid both
with a simpler formulation using qx{}.

Per complaint from Amit Kapila.

Recently we refactored things so that pg_regress makes the
"testtablespace" subdirectory used by the core regression tests,
instead of doing that in the makefiles.  That had the undesirable
side effect of making such a subdirectory in every directory that
has "input" or "output" test files.  Since these subdirectories
remain empty, git doesn't complain about them, but nonetheless
they're clutter.

To fix, invent an explicit --make-testtablespace-dir switch,
so that pg_regress only makes the subdirectory when explicitly
told to.

Discussion: https://postgr.es/m/2854388.1621284789@sss.pgh.pa.us

Fix PG 14 relnotes to use <link> instead of <xref>.  This was discussed
in commit message 59fa7eb6.

One of the tests for the pgbench permute() function added by
6b258e3d fails on some 32-bit platforms, due to variations in the
floating point computations in getrand(). The remaining tests give
sufficient coverage, so just remove the failing test.

Reported by Christoph Berg. Analysis by Thomas Munro and Tom Lane.
Based on patch by Fabien Coelho.

Discussion: https://postgr.es/m/YKQnUoYV63GRJBDD@msg.df7cb.de

If a promotion is triggered while recovery is paused, the paused state ends
and promotion continues. But previously in that case
pg_get_wal_replay_pause_state() returned 'paused' wrongly while a promotion
was ongoing.

This commit changes a standby promotion so that it marks the recovery
pause state as 'not paused' when it's triggered, to fix the issue.

Author: Fujii Masao
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/f706876c-4894-0ba5-6f4d-79803eeea21b@oss.nttdata.com

We were not waiting for a publisher to catch up with the subscriber after
creating a subscription. Now, it can happen that apply worker starts
replication even after we have disabled the subscription in the test. This
will make the test expect that there is no active slot whereas there
exists one. Fix this symptom by allowing the publisher to wait for
catching up with the subscription.

It is not a good idea to ensure if the slot is still active by checking
for walsender existence as we release the slot after we clean up the
walsender related memory. Fix that by checking the slot status in
pg_replication_slots.

Also, it is better to avoid repeated enabling/disabling of the
subscription.

Finally, we make autovacuum off for this test to avoid any empty
transaction appearing in the test while consuming changes.

Reported-by: as per buildfarm
Author: Vignesh C
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/CAA4eK1+uW1UGDHDz-HWMHMen76mKP7NJebOTZN4uwbyMjaYVww@mail.gmail.com

1) Previously there were both pgstat_send_wal() and pgstat_report_wal()
   in order to send WAL activity to the stats collector. With the former being
   used by wal writer, the latter by most other processes. They were a bit
   redundant and so this commit merges them into pgstat_send_wal() to
   simplify the code.

2) Previously WAL global statistics counters were calculated and then
   compared with zero-filled buffer in order to determine whether any WAL
   activity has happened since the last submission. These calculation and
   comparison were not cheap. This was regularly exercised even in read-only
   workloads. This commit fixes the issue by making some WAL activity
   counters directly be checked to determine if there's WAL activity stats
   to send.

3) Previously pgstat_report_stat() did not check if there's WAL activity
   stats to send as part of the "Don't expend a clock check if nothing to do"
   check at the top. It's probably rare to have pending WAL stats without
   also passing one of the other conditions, but for safely this commit
   changes pgstat_report_stats() so that it checks also some WAL activity
   counters at the top.

This commit also adds the comments about the design of WAL stats.

Reported-by: Andres Freund
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Atsushi Torikoshi, Andres Freund, Fujii Masao
Discussion: https://postgr.es/m/20210324232224.vrfiij2rxxwqqjjb@alap3.anarazel.de

This is an oversight from bbe0a81d, where the equivalent option exists
in pg_dump.  This is useful to be able to reset the compression methods
cluster-wide when restoring the data based on default_toast_compression.

Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/YKHC+qCJvzCRVCpY@paquier.xyz

README.barrier didn't seem to get the memo when atomics were added. Fix
that.

Author: Tatsuo Ishii, David Rowley
Discussion: https://postgr.es/m/20210516.211133.2159010194908437625.t-ishii%40sraoss.co.jp
Backpatch-through: 9.6, oldest supported release

We used to distribute a binary version of flex for windows on our
download site, but it hasn't been working for many years. The "old
documentation" referenced was also for versions that have been EOL for
many years. So, remove it.

Discussion: https://postgr.es/m/CABUevEwXLJpVpab62f7AFXNWQ5=U0kvErCLq4VEsikidLyzSQg@mail.gmail.com

Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 9bbd9c3714d0c76daaa806588b1fbf744aa60496

Incorrect wording got applied in 7531fcb1.

Reported-By: Fujii Masao
Discussion: https://postgr.es/m/e5512912-eac9-b163-df2b-e2601ce06d27@oss.nttdata.com

Add a note of caution on the performance of asynchronous execution by
postgres_fdw.  Follow-up for commit 27e1f145.

Stephen Frost, a little bit expanded by me.

Discussion: https://postgr.es/m/20210506171224.GV20766%40tamriel.snowman.net

Also remove ALTER TYPE ...SUBSCRIPT, and update for all current commits.

Per buildfarm

Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default.  By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.

I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.

Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol

ForgetBackgroundWorker lacked any memory barrier at all, while
BackgroundWorkerStateChange had one but unaccountably did
additional manipulation of the slot after the barrier.  AFAICS,
the rule must be that the barrier is immediately before setting
or clearing slot->in_use.

It looks like back in 9.6 when ForgetBackgroundWorker was first
written, there might have been some case for not needing a
barrier there, but I'm not very convinced of that --- the fact
that the load of bgw_notify_pid is in the caller doesn't seem
to guarantee no memory ordering problem.  So patch 9.6 too.

It's likely that this doesn't fix any observable bug on Intel
hardware, but machines with weaker memory ordering rules could
have problems here.

Discussion: https://postgr.es/m/4046084.1620244003@sss.pgh.pa.us

Add a defensive "can't happen" error to code that handles nbtree posting
list splits (promote an existing assertion).  This avoids a segfault in
the event of an insertion of a newitem that is somehow identical to an
existing non-pivot tuple in the index.  An nbtree index should never
have two index tuples with identical TIDs.

This scenario is not particular unlikely in the event of any kind of
corruption that leaves the index in an inconsistent state relative to
the heap relation that is indexed.  There are two known reports of
preventable hard crashes.  Doing nothing seems unacceptable given the
general expectation that nbtree will cope reasonably well with corrupt
data.

Discussion: https://postgr.es/m/CAH2-Wz=Jr_d-dOYEEmwz0-ifojVNWho01eAqewfQXgKfoe114w@mail.gmail.com
Backpatch: 13-, where nbtree deduplication was introduced.

Formerly we just relied on operator classes that assert longValuesOK
to eventually shorten the leaf value enough to fit on an index page.
That fails since the introduction of INCLUDE-column support (commit
09c1c6ab), because the INCLUDE columns might alone take up more
than a page, meaning no amount of leaf-datum compaction will get
the job done.  At least with spgtextproc.c, that leads to an infinite
loop, since spgtextproc.c won't throw an error for not being able
to shorten the leaf datum anymore.

To fix without breaking cases that would otherwise work, add logic
to spgdoinsert() to verify that the leaf tuple size is decreasing
after each "choose" step.  Some opclasses might not decrease the
size on every single cycle, and in any case, alignment roundoff
of the tuple size could obscure small gains.  Therefore, allow
up to 10 cycles without additional savings before throwing an
error.  (Perhaps this number will need adjustment, but it seems
quite generous right now.)

As long as we've developed this logic, let's back-patch it.
The back branches don't have INCLUDE columns to worry about, but
this seems like a good defense against possible bugs in operator
classes.  We already know that an infinite loop here is pretty
unpleasant, so having a defense seems to outweigh the risk of
breaking things.  (Note that spgtextproc.c is actually the only
known opclass with longValuesOK support, so that this is all moot
for known non-core opclasses anyway.)

Per report from Dilip Kumar.

Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com

Knowing that a buggy opclass could cause an infinite insertion loop,
spgdoinsert() intended to allow its loop to be interrupted by query
cancel.  However, that never actually worked, because in iterations
after the first, we'd be holding buffer lock(s) which would cause
InterruptHoldoffCount to be positive, preventing servicing of the
interrupt.

To fix, check if an interrupt is pending, and if so fall out of
the insertion loop and service the interrupt after we've released
the buffers.  If it was indeed a query cancel, that's the end of
the matter.  If it was a non-canceling interrupt reason, make use
of the existing provision to retry the whole insertion.  (This isn't
as wasteful as it might seem, since any upper-level index tuples we
already created should be usable in the next attempt.)

While there's no known instance of such a bug in existing release
branches, it still seems like a good idea to back-patch this to
all supported branches, since the behavior is fairly nasty if a
loop does happen --- not only is it uncancelable, but it will
quickly consume memory to the point of an OOM failure.  In any
case, this code is certainly not working as intended.

Per report from Dilip Kumar.

Discussion: https://postgr.es/m/CAFiTN-uxP_soPhVG840tRMQTBmtA_f_Y8N51G7DKYYqDh7XN-A@mail.gmail.com

Split up CHECK_FOR_INTERRUPTS() to provide an additional macro
INTERRUPTS_PENDING_CONDITION(), which just tests whether an
interrupt is pending without attempting to service it.  This is
useful in situations where the caller knows that interrupts are
blocked, and would like to find out if it's worth the trouble
to unblock them.

Also add INTERRUPTS_CAN_BE_PROCESSED(), which indicates whether
CHECK_FOR_INTERRUPTS() can be relied on to clear the pending interrupt.

This commit doesn't actually add any uses of the new macros,
but a follow-on bug fix will do so.  Back-patch to all supported
branches to provide infrastructure for that fix.

Alvaro Herrera and Tom Lane

Discussion: https://postgr.es/m/20210513155351.GA7848@alvherre.pgsql

This explains the new behavior introduced by 0827e8af as well as
preexisting.

Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20210423180152.GA17270@telsasoft.com

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20210514020141.GQ27406@telsasoft.com

This seems to be leftover from ea15e186 and from when we used to evaluate
SRFs at each node.

Since there is an unconditional "return" at the end of the loop body, only
1 loop is ever possible, so we can just change this into an if condition.

There is no actual bug being fixed here so no back-patch. It seems fine to
just fix this anomaly in master only.

Author: Greg Nancarrow
Discussion: https://postgr.es/m/CAJcOf-d7T1q0az-D8evWXnsuBZjigT04WkV5hCAOEJQZRWy28w@mail.gmail.com

The percentage of blocks from the table value reported by autovacuum log
output (following commit 5100010e) should never exceed 100% because
it describes the state of the table back when lazy_vacuum() was called.
The value could nevertheless exceed 100% in the event of heap relation
truncation.  We failed to compensate for how truncation affects
rel_pages.

Fix the faulty accounting by using the original rel_pages value instead
of the current/final rel_pages value.
Reported-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210423204306.5osfpkt2ggaedyvy@alap3.anarazel.de

Make sample like_regex match string values of the root object instead of the
whole document.  The corrected example seems to represent a more relevant
use case.

Backpatch to 12, when jsonpath was introduced.

Discussion: https://postgr.es/m/13440f8b-4c1f-5875-c8e3-f3f65606af2f%40xs4all.nl
Author: Erik Rijkers
Reviewed-by: Michael Paquier, Alexander Korotkov
Backpatch-through: 12

Commits 27e1f145 and 86dc9005, which were independently discussed,
cause a crash when executing an inherited foreign UPDATE/DELETE query
with asynchronous execution enabled, where children of an Append node
that is the direct/indirect child of the ModifyTable node are rewritten
so as to modify foreign tables directly by postgresPlanDirectModify();
as in that case the direct modifications are executed asynchronously,
which is not currently supported by asynchronous execution.  Fix by
disabling asynchronous execution of the direct modifications in that
function.

Author: Etsuro Fujita
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/CAPmGK158e9sJOfuWxfn%2B0ynrspXQU3JhNjSCbaoeSzMvnga%2Bbw%40mail.gmail.com