Unfortunately the segment size checks from 72a98a63 had the negative
side-effect of breaking a corner case in mdsync(): When processing a
fsync request for a truncated away segment mdsync() could fail with
"could not fsync file" (if previous segment < RELSEG_SIZE) because
_mdfd_getseg() now wouldn't return the relevant segment anymore.

The cleanest fix seems to be to allow the caller of _mdfd_getseg() to
specify whether checks for RELSEG_SIZE are performed. To allow doing so,
change the ExtensionBehavior enum into a bitmask. Besides allowing for
the addition of EXTENSION_DONT_CHECK_SIZE, this makes for a nicer
implementation of EXTENSION_REALLY_RETURN_NULL.

Besides mdsync() the only callsite that should change behaviour due to
this is mdprefetch() which now doesn't create segments anymore, even in
recovery. Given the uses of mdprefetch() that seems better.

Reported-By: Thom Brown
Discussion: CAA-aLv72QazLvPdKZYpVn4a_Eh+i4_cxuB03k+iCuZM_xjc+6Q@mail.gmail.com

From: Alexander Law <exclusion@gmail.com>

Conversion functions were previously marked as parallel-unsafe, since
that is the default, but in fact they are safe.  Parallel-safe
functions defined in pg_proc.h and redefined in system_views.sql were
ending up as parallel-unsafe because the redeclarations were not
marked PARALLEL SAFE.  While editing system_views.sql, mark ts_debug()
parallel safe also.

Andreas Karlsson

These adjustments adjust code and comments in minor ways to prevent
pgindent from mangling them.  Among other things, I tried to avoid
situations where pgindent would emit "a +b" instead of "a + b", and I
tried to avoid having it break up inline comments across multiple
lines.

Since this is a minor issue, no back-patch.

Julien Rouhaud

Pointed out by Andres Freund

Back in 3b02ea4f I added some comments in various places to explain
how logical decoding and other things worked.  Not all of the changes
were welcome, because they were misleading or wrong.  This changes them
a little bit to make them more accurate.

Some other comments are also changed to be more accurate.  Also, fix a
bunch of typos.

Author: Álvaro Herrera, Craig Ringer

Andres Freund reviewed some parts of this.

Fix typos, reword some overly general index entries.

awk's equality-comparison operator is "==" not "=".  We got this right
in many places, but not in configure's checks for supported version
numbers of flex and perl.  It hadn't been noticed because unsupported
versions are so old as to be basically extinct in the wild, and because
the only consequence is whether or not a WARNING flies by during
configure.

Daniel Gustafsson noted the problem with respect to the test for flex,
I found the other by reviewing other awk calls.

Commit 71176854 made pg_start_backup
parallel-restricted rather than parallel-safe, because it now relies
on backend-private state that won't be synchronized with the parallel
worker.  However, it didn't update pg_proc.h.  Separately, Andreas
Karlsson observed that system_views.sql neglected to reiterate the
parallel-safety markings whe redefining various functions, including
this one; so add a PARALLEL RESTRICTED declaration there to match
the new value in pg_proc.h.

This time, use the buildfarm-supplied contents for this file, instead
of trying to update it by eyeballing the pgindent output.

Per discussion with Tom and Bruce.

CHECK_PAGE_OFFSET_RANGE() has been unused forever.
CHECK_RELATION_BLOCK_RANGE() has been unused in pgstatindex.c ever since
bt_page_stats() and bt_page_items() functions were moved from pgstattuple
to pageinspect module. It still exists in pageinspect/btreefuncs.c.

Daniel Gustafsson

From: Guillaume Lelarge <guillaume@lelarge.info>

This has the inverse effect of --master-only.  It's needed to help find
cases where a commit should not be described in major release notes
because it was back-patched into older branches, though not at the same
time as the HEAD commit.

Commit 1bbd52cb didn't bother with such niceties.

Now that Paths have their own rows field, print that rather than
the parent relation's rowcount.

Show the relid sets associated with Paths using table names rather
than numbers; since this code is able to print simple Var references
using table names, it seems a bit silly that print_relids can't.

Print the cheapest_parameterized_paths list for a RelOptInfo, and
include information about a parameterized path's required_outer rels.

Noted while trying to use this feature to debug Alexander Kirkouski's
recent bug report.

We mustn't run generate_gather_paths() during add_paths_to_joinrel(),
because that function can be invoked multiple times for the same target
joinrel.  Not only is it wasteful to build GatherPaths repeatedly, but
a later add_partial_path() could delete the partial path that a previously
created GatherPath depends on.  Instead establish the convention that we
do generate_gather_paths() for a rel only just before set_cheapest().

The code was accidentally not broken for baserels, because as of today there
never is more than one partial path for a baserel.  But that assumption
obviously has a pretty short half-life, so move the generate_gather_paths()
calls for those cases as well.

Also add some generic comments explaining how and why this all works.

Per fuzz testing by Andreas Seltenreich.

Report: <871t5pgwdt.fsf@credativ.de>

If we're not going to reject such setups entirely, throwing a WARNING in
check_synchronous_standby_names() is unhelpful, because it will cause the
warning to be logged again every time the postmaster receives SIGHUP.
Per discussion, just remove the warning.

In passing, improve the documentation for synchronous_commit, which had not
gotten the word that now there can be more than one synchronous standby.

Given a three-or-more-way equivalence class, such as X.Y = Y.Y = Z.Z,
it was possible for the planner to omit one of the quals needed to
enforce that all members of the equivalence class are actually equal.
This only happened in the case of a parameterized join node for two
of the relations, that is a plan tree like

	Nested Loop
	  ->  Scan X
	  ->  Nested Loop
	    ->  Scan Y
	    ->  Scan Z
	          Filter: Z.Z = X.X

The eclass machinery normally expects to apply X.X = Y.Y when those
two relations are joined, but in this shape of plan tree they aren't
joined until the top node --- and, if the lower nested loop is marked
as parameterized by X, the top node will assume that the relevant eclass
condition(s) got pushed down into the lower node.  On the other hand,
the scan of Z assumes that it's only responsible for constraining Z.Z
to match any one of the other eclass members.  So one or another of
the required quals sometimes fell between the cracks, depending on
whether consideration of the eclass in get_joinrel_parampathinfo()
for the lower nested loop chanced to generate X.X = Y.Y or X.X = Z.Z
as the appropriate constraint there.  If it generated the latter,
it'd erroneously suppose that the Z scan would take care of matters.
To fix, force X.X = Y.Y to be generated and applied at that join node
when this case occurs.

This is *extremely* hard to hit in practice, because various planner
behaviors conspire to mask the problem; starting with the fact that the
planner doesn't really like to generate a parameterized plan of the
above shape.  (It might have been impossible to hit it before we
tweaked things to allow this plan shape for star-schema cases.)  Many
thanks to Alexander Kirkouski for submitting a reproducible test case.

The bug can be demonstrated in all branches back to 9.2 where parameterized
paths were introduced, so back-patch that far.

Without a few entries beyond old_snapshot_threshold, the lookup
would often fail, resulting in the more aggressive pruning or
vacuum being skipped often enough to matter.  This was very clearly
shown by a python test script posted by Ants Aasma, and was likely
a factor in an earlier but somewhat less clear-cut test case posted
by Jeff Janes.

This patch makes no change to the logic, per se -- it just makes
the array of mapping entries big enough to make lookup misses based
on timing much less likely.  An occasional miss is still possible
if a thread stalls for more than 10 minutes, but that does not
create any problem with correctness of behavior.  Besides, if
things are so busy that a thread is stalling for more than 10
minutes, it is probably OK to skip the more aggressive cleanup at
that particular point in time.

per gripe from Michael Paquier.

From: Dmitry Igrishin <dmitigr@gmail.com>

Author: Thomas Munro

reported by Christian Ullrich

Adjust the way we detect the locale. As a result the minumum Windows
version supported by VS2015 and later is Windows Vista. Add some tweaks
to remove new compiler warnings. Remove documentation references to the
now obsolete msysGit.

Michael Paquier, somewhat edited by me, reviewed by Christian Ullrich.

Backpatch to 9.5

Since 5a991ef8 we're explicitly asking for feedback from the receiving
side when shutting down walsender, if there's not yet replicated
data.

Unfortunately we didn't remember (i.e. set waiting_for_ping_response to
true) having asked for feedback, leading to scenarios in which replies
were requested at a high frequency.

I can't reproduce this problem on my laptop, I think that's because the
problem requires a significant TCP window to manifest due to the
!pq_is_send_pending() condition. But since this clearly is a bug, let's
fix it.  There's quite possibly more wrong than just this though.

While fiddling with WalSndDone(), I rewrote a hard to understand comment
about looking at the flush vs. the write position.

Reported-By: Nick Cleaton, Magnus Hagander
Author: Nick Cleaton
Discussion: CAFgz3kus=rC_avEgBV=+hRK5HYJ8vXskJRh8yEAbahJGTzF2VQ@mail.gmail.com
    CABUevExsjROqDcD0A2rnJ6HK6FuKGyewJr3PL12pw85BHFGS2Q@mail.gmail.com
Backpatch: 9.4, were 5a991ef8 introduced the use of feedback messages
    during shutdown.

Commit 23a41573 attempted to fix the DatumGetBool macro to ignore bits
in a Datum that are to the left of the actual bool value.  But it did that
by casting the Datum to bool; and on compilers that use C99 semantics for
bool, that ends up being a whole-word test, not a 1-byte test.  This seems
to be the true explanation for contrib/seg failing in VS2015.  To fix, use
GET_1_BYTE() explicitly.  I think in the previous patch, I'd had some idea
of not having to commit to bool being exactly 1 byte wide, but regardless
of what the compiler's bool is, boolean columns and Datums are certainly
1 byte wide.

The previous fix was (eventually) back-patched into all active versions,
so do likewise with this one.

This reverts commit c8e81afc.
That turns out to have been based on a faulty diagnosis of why the
VS2015 build was misbehaving.  Instead, we need to fix DatumGetBool().

Use macroses for definition amstrategies/amsupport fields instead of
hardcoded values.

Author: Nikolay Shaplov with addition for contrib/bloom

Previously, ginInsertCleanup could exit early if it detects that someone else
is cleaning up the pending list, without waiting for that someone else to
finish the job. But in this case vacuum could miss tuples to be deleted.

Cleanup process now locks metapage with a help of heavyweight
LockPage(ExclusiveLock), and it guarantees that there is no another cleanup
process at the same time. Lock is taken differently depending on caller of
cleanup process: any vacuums and gin_clean_pending_list() will be blocked
until lock becomes available, ordinary insert uses conditional lock to
prevent indefinite waiting on lock.

Insert into pending list doesn't use this lock, so insertion isn't blocked.

Also, patch adds stopping of cleanup process when at-start-cleanup-tail is
reached in order to prevent infinite cleanup in case of massive insertion. But
it will stop only for automatic maintenance tasks like autovacuum.

Patch introduces choice of limit of memory to use: autovacuum_work_mem,
maintenance_work_mem or work_mem depending on call path.

Patch for previous releases should be reworked due to changes between 9.6 and
previous ones in this area.

Discover and diagnostics by Jeff Janes and Tomas Vondra

Patch by me with some ideas of Jeff Janes

The previous coding here was formally undefined, though it seems to
accidentally work on most platforms in the buildfarm.  Caught by some
OpenBSD platforms in which libc contains an assertion check for
overlapping areas passed to memcpy().

Thomas Munro

Commit 989be081 added a flex/bison lexer/parser to interpret
synchronous_standby_names.  It was done in a pretty crufty way, though,
making assorted end-use sites responsible for calling the parser at the
right times.  That was not only vulnerable to errors of omission, but made
it possible that lexer/parser errors occur at very undesirable times,
and created memory leakages even if there was no error.

Instead, perform the parsing once during check_synchronous_standby_names
and let guc.c manage the resulting data.  To do that, we have to flatten
the parsed representation into a single hunk of malloc'd memory, but that
is not very hard.

While at it, work a little harder on making useful error reports for
parsing problems; the previous code felt that "synchronous_standby_names
parser returned 1" was an appropriate user-facing error message.  (To
be fair, it did also log a syntax error message, but separately from the
GUC problem report, which is at best confusing.)  It had some outright
bugs in the face of invalid input, too.

I (tgl) also concluded that we need to restrict unquoted names in
synchronous_standby_names to be just SQL identifiers.  The previous coding
would accept darn near anything, which (1) makes the quoting convention
both nearly-unnecessary and formally ambiguous, (2) makes it very hard to
understand what is a syntax error and what is a creative interpretation of
the input as a standby name, and (3) makes it impossible to further extend
the syntax in future without a compatibility break.  I presume that we're
intending future extensions of the syntax, else this parsing infrastructure
is massive overkill, so (3) is an important objection.  Since we've taken
a compatibility hit for non-identifier names with this change anyway, we
might as well lock things down now and insist that users use double quotes
for standby names that aren't identifiers.

Kyotaro Horiguchi and Tom Lane

Commit a31212b4 was a little too hasty.

Per report from Tom Lane.

Discussion: 24748.1461764666@sss.pgh.pa.us

Per a suggestion from Craig Ringer.  This wording from Tom Lane,
following discussion.

David Rowley

If you were wondering what editor I use, now you know.

In addition to adding new typedefs, I also re-sorted the file so that
various entries add piecemeal, mostly or entirely by me, were alphabetized
the same way as other entries in the file.

In nodeFuncs.c, pgindent wants to introduce spurious indentation into
the definitions of planstate_tree_walker and planstate_walk_subplans.
Fix that by spreading the definition out across several lines, similar
to what is already done for other walker functions in that file.

In execParallel.c, in the definition of SharedExecutorInstrumentation,
pgindent wants to insert more whitespace between the type name and the
member name.  That causes it to mangle comments later on the line.  Fix
by moving the comments out of line.  Now that we have a bit more room,
add some more details that may be useful to the next person reading
this code.

It's buggy.  If somebody needs this later, they'll need to put back
a non-buggy vesion of it.

Discussion: CAM3SWZT-i6R9JU5YXa8MJUou2_r3LfGJZpQ9tYa1BYxfkj0=cQ@mail.gmail.com
Discussion: CAM3SWZRUOLsYoTT83QgdUy9D8ehYWm_nvbrrfcOOzikiRfFY7g@mail.gmail.com

Peter Geoghegan

The way that PartialAggregate and FinalizeAggregate plan nodes were
displaying output columns before was bogus.  Now, FinalizeAggregate
produces the same outputs as an Aggregate would have produced, while
PartialAggregate produces each of those outputs prefixed by the word
PARTIAL.

Discussion: 12585.1460737650@sss.pgh.pa.us

Patch by me, reviewed by David Rowley.