There is no need to forbid ALTER TABLE ONLY on partitioned tables,
when no partitions exist yet.  This can be handy for users who are
building up their partitioned table independently and will create actual
partitions later.

In addition, this is how pg_dump likes to operate in certain instances.

Author: Amit Langote, with some error message word-smithing by me

Reported-by: Tels

Otherwise one would have to wait up to DEFAULT_NAPTIME_PER_CYCLE until
the subscription worker is considered for starting.

There is a small race condition:  If one enables a subscription right
after disabling it, the launcher might not have registered the stopping
when receiving the wakeup signal for the re-enabling.  The start will
then not happen right away but after the full cycle time.

Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>

Reported-by: Tom Lane

Reported-by: Andres Freund

Reported-by: Tels, Andres Freund

In quorum-based synchronous replication, all the standbys listed in
synchronous_standby_names equally have chances to be chosen
as synchronous standbys. So they should have the same priority.
However, previously, quorum standbys whose names appear earlier
in the list were given higher priority values though the difference of
those priority values didn't affect the selection of synchronous standbys.
Users could see those "meaningless" priority values in pg_stat_replication
and this was confusing.

This commit gives all the quorum synchronous standbys the same
highest priority, i.e., 1, in order to remove such confusion.

Author: Fujii Masao
Reviewed-by: Masahiko Sawada, Kyotaro Horiguchi
Discussion: http://postgr.es/m/CAHGQGwEKOw=SmPLxJzkBsH6wwDBgOnVz46QjHbtsiZ-d-2RGUg@mail.gmail.com

Reported-by: Michael Paquier, Felix Gerzaguet

Reported-by: David Rowley, Amit Langote, Ashutosh Bapat

Commit 5dfc1981 removed the only
existing caller of hash_freeze, but left behind a comment indicating
that hash_freeze was still used.  Adjust.

Kyotaro Horiguchi

Discussion: http://postgr.es/m/20170424.165541.230634914.horiguchi.kyotaro@lab.ntt.co.jp

This commit also fixes copyright line missed by the automated script.

Author: Masahiko Sawada

Reported-by: Amit Kapila

The requirement to rebuild pg_upgrade-ed hash indexes was kept in the
incompatibilities section.

Reported-by: Amit Kapila

Reported-by: Amit Kapila

Reported-by: Takayuki Tsunakawa

Objects in an extension are shippable to a foreign server if the
extension is part of the foreign server definition's shippable
extensions list.  But this was not properly considered in some cases
when checking whether a join condition can be pushed to a foreign server
and the join condition uses an object from a shippable extension.  So
the join would never be pushed down in those cases.

So, the list of extensions needs to be made available in fpinfo of the
relation being considered to be pushed down before any expressions are
assessed for being shippable.  Fix foreign_join_ok() to do that for a
join relation.

The code to save FDW options in fpinfo is scattered at multiple places.
Bring all of that together into functions apply_server_options(),
apply_table_options(), and merge_fdw_options().

David Rowley and Ashutosh Bapat, per report from David Rowley

Reported-by: Takayuki Tsunakawa

Reported-by: Andreas Karlsson

This reverts commit 81069a9e.

Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional.  Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble).  If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.

Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us

Traditionally we've unblocked signals, called select(2), and then blocked
signals again.  The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal.  As with
the somewhat-similar symptoms fixed by commit 89390208, the main practical
problem is slow launching of parallel workers.  The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.

To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem.  Where not available, we continue
to use the old way, and are no worse off than before.

pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it.  A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock.  Still, we're no worse off
than before on such a platform.

There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition.  But that's not happening before v11 at the earliest.

Back-patch to 9.6.  The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.

Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us

The postmaster keeps signals blocked everywhere except while waiting
for something to happen in ServerLoop().  The code expects that the
select(2) will be cancelled with EINTR if an interrupt occurs; without
that, followup actions that should be performed by ServerLoop() itself
will be delayed.  However, some platforms interpret the SA_RESTART
signal flag as meaning that they should restart rather than cancel
the select(2).  Worse yet, some of them restart it with the original
timeout delay, meaning that a steady stream of signal interrupts can
prevent ServerLoop() from iterating at all if there are no incoming
connection requests.

Observable symptoms of this, on an affected platform such as HPUX 10,
include extremely slow parallel query startup (possibly as much as
30 seconds) and failure to update timestamps on the postmaster's sockets
and lockfiles when no new connections arrive for a long time.

We can fix this by running the postmaster's signal handlers without
SA_RESTART.  That would be quite a scary change if the range of code
where signals are accepted weren't so tiny, but as it is, it seems
safe enough.  (Note that postmaster children do, and must, reset all
the handlers before unblocking signals; so this change should not
affect any child process.)

There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point it might
be appropriate to revert this patch.  But that's not happening before
v11 at the earliest.

Back-patch to 9.6.  The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.

Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us

Those extern declartions were mistakenly added by commit 7c4f5240.

Author: Petr Jelinek

This corner case didn't behave nicely at all: the postmaster would
(partially) update its state as though the process had started
successfully, and be quite confused thereafter.  Fix it to act
like the worker had crashed, instead.

In passing, refactor so that do_start_bgworker contains all the
state-change logic for bgworker launch, rather than just some of it.

Back-patch as far as 9.4.  9.3 contains similar logic, but it's just
enough different that I don't feel comfortable applying the patch
without more study; and the use of bgworkers in 9.3 was so small
that it doesn't seem worth the extra work.

transam/parallel.c is still entirely unprepared for the possibility
of bgworker startup failure, but that seems like material for a
separate patch.

Discussion: https://postgr.es/m/4905.1492813727@sss.pgh.pa.us

Fix machine-dependent sorting of column numbers.  (Odd behavior
would only materialize for column numbers above 255, but that's
certainly legal.)

Fix poor choice of SQLSTATE for some errors, and improve error message
wording.  (Notably, "is not a scalar type" is a totally misleading way
to explain "does not have a default btree opclass".)

Avoid taking AccessExclusiveLock on the associated relation during DROP
STATISTICS.  That's neither necessary nor desirable, and it could easily
have put us into situations where DROP fails (compare commit 68ea2b7f).

Adjust/improve comments.

David Rowley and Tom Lane

Discussion: https://postgr.es/m/CAKJS1f-GmCfPvBbAEaM5xoVOaYdVgVN1gicALSoYQ77z-+vLbw@mail.gmail.com

poll.h is mandated by Single Unix Spec v2, the usual baseline for
postgres on unix.  None of the unixoid buildfarms animals has
sys/poll.h but not poll.h.  Therefore there's not much point to test
for sys/poll.h's existence and include it optionally.

Author: Andres Freund, per suggestion from Tom Lane
Discussion: https://postgr.es/m/20505.1492723662@sss.pgh.pa.us

This seems to be largely cosmetic, avoiding valgrind bleats and the
like. The uninitialized padding influences the CRC of the on-disk
entry, but because it's also used when verifying the CRC, that doesn't
cause spurious failures.  Backpatch nonetheless.

It's a bit unfortunate that contrib/test_decoding/sql/replorigin.sql
doesn't exercise the checkpoint path, but checkpoints are fairly
expensive on weaker machines, and we'd have to stop/start for that to
be meaningful.

Author: Andres Freund
Discussion: https://postgr.es/m/20170422183123.w2jgiuxtts7qrqaq@alap3.anarazel.de
Backpatch: 9.5, where replication origins were introduced

As reported by buildfarm animal skink / valgrind, some of the
variables weren't always initialized.  To avoid further mishaps use
memset to ensure the entire entry is initialized.

Author: Petr Jelinek
Reported-By: Andres Freund
Discussion: https://postgr.es/m/20170422183123.w2jgiuxtts7qrqaq@alap3.anarazel.de
Backpatch: none, code new in master

poll(2) is required by Single Unix Spec v2, the usual baseline for
postgres (leaving windows aside).  There's not been any buildfarm
animals without poll(2) for a long while, leaving the select(2)
implementation to be largely untested.

On windows, including mingw, poll() is not available, but we have a
special case implementation for windows anyway.

Author: Andres Freund
Discussion: https://postgr.es/m/20170420003611.7r2sdvehesdyiz2i@alap3.anarazel.de

Force overwriteOK = true while we investigate deeper fix

Proposed by Tom Lane as temporary measure, accepted by me

Bug was masked by error in running 004_timeline_switch.pl that was
fixed recently in 7d68f228.

Detective work by Alvaro Herrera and Tom Lane

Author: Thomas Munro

ProcessTwoPhaseBuffer (formerly StandbyRecoverPreparedTransactions)
mixed up the parent and child XIDs when calling SubTransSetParent to
record the transactions' relationship in pg_subtrans.

Remarkably, analysis by Simon Riggs suggests that this doesn't lead to
visible problems (at least, not in non-Assert builds).  That might
explain why we'd not noticed it before.  Nonetheless, it's surely wrong.

This code was born broken, so back-patch to all supported branches.

Discussion: https://postgr.es/m/20110.1492905318@sss.pgh.pa.us

archive_command and restore_command need to refer to Windows paths, not
Msys virtual file system paths, as postgres is completely unaware of the
latter, so prefix them with the Windows path to the virtual file system
root. Clean psql and pg_recvlogical output of carriage returns.

PostgresNode blithely ignored the exit status of pg_ctl, and in general
made no effort to be sure that the server was running when it should be.
This caused it to miss server crashes, which is a serious shortcoming
in a test scaffold.  Make it complain if pg_ctl fails, and modify the
start and stop logic to complain if the server doesn't start, or doesn't
stop, when expected.

Also, have it turn off the "restart_after_crash" configuration parameter
in created clusters, as bitter experience has shown that leaving that on
can mask crashes too.

We might at some point need variant functions that allow for, eg,
server start failure to be expected.  But no existing test case appears
to want that, and it surely shouldn't be the default behavior.

Note that this *will* break the buildfarm, as it will expose known
bugs that the previous testing failed to.  I'm committing it despite
that, to verify that we get the expected failures in the buildfarm
not just in manual testing.

Back-patch into 9.6 where PostgresNode was introduced.  (The 9.6
branch is not expected to show any failures.)

Discussion: https://postgr.es/m/21432.1492886428@sss.pgh.pa.us

Although the documentation for append_conf said clearly that it didn't
add a newline, many test authors seem to have forgotten that ... or maybe
they just consulted the example at the top of the POD documentation,
which clearly shows adding a config entry without bothering to add a
trailing newline.  The worst part of that is that it works, as long as
you don't do it more than once, since the backend isn't picky about
whether config files end with newlines.  So there's not a strong forcing
function reminding test authors not to do it like that.  Upshot is that
this is a terribly fragile way to go about things, and there's at least
one existing test case that is demonstrably broken and not testing what
it thinks it is.

Let's just make append_conf append a newline, instead; that is clearly
way safer than the old definition.

I also cleaned up a few call sites that were unnecessarily ugly.
(I left things alone in places where it's plausible that additional
config lines would need to be added someday.)

Back-patch the change in append_conf itself to 9.6 where it was added,
as having a definitional inconsistency between branches would obviously
be pretty hazardous for back-patching TAP tests.  The other changes are
just cosmetic and don't need to be back-patched.

Discussion: https://postgr.es/m/19751.1492892376@sss.pgh.pa.us

Ancient versions of Test::More don't support the note() function used in
some TAP tests, so we require the minimum version of the module that
does.