Fix additional bogosity in commit 9029f4b3.  Include the
BackendSslStatusBuffer in the BackendStatusShmemSize calculation,
avoid ugly and error-prone casts to char* and back, put related
code stanzas into a consistent order (and fix a couple of previous
instances of that sin).  All cosmetic except for the size oversight.

Nasty memory-stomp bug in commit 9029f4b3.  It's not apparent how
this survived even cursory testing :-(.  Per report from Peter Holzer.

On some platforms, notably ARM and PowerPC, 'char' is unsigned by
default. This fixes an assertion failure at WAL replay on such platforms.

Reported by Noah Misch. Backpatch to 9.5, where this was broken.

Originally reported by Vladimir Borodin in the pg_rewind github project,
patch by Michael Paquier.

It does currently, and I don't see us changing that any time soon, but we
don't make that assumption anywhere else.

Per Tom Lane's suggestion. Backpatch to 9.2, like the previous patch that
added this assumption.

XLogReaderFree failed to free the per-block data buffers, when they
happened to not be used by the latest read WAL record.

Michael Paquier. Backpatch to 9.5, where the per-block buffers were added.

In GIN, an all-zeros page would be leaked forever, and never reused. Just
add them to the FSM in vacuum, and they will be reinitialized when grabbed
from the FSM. On master and 9.5, attempting to access the page's opaque
struct also caused an assertion failure, although that was otherwise
harmless.

Reported by Jeff Janes. Backpatch to all supported versions.

SP-GiST initialized an all-zeros page at vacuum, but that was not
WAL-logged, which is not safe. You might get a torn page write, when it gets
flushed to disk, and end-up with a half-initialized index page. To fix,
leave it in the all-zeros state, and add it to the FSM. It will be
initialized when reused. Also don't set the page-deleted flag when recycling
an empty page. That was also not WAL-logged, and a torn write of that would
cause the page to have an invalid checksum.

Backpatch to 9.2, where SP-GiST indexes were added.

That was otherwise harmless, but tripped the new assertion in
PageGetSpecialPointer().

Reported by Amit Langote. Backpatch to 9.5, where the assertion was added.

There is no full discussion of speculative insertions in the executor
README. There is a high-level explanation in execIndexing.c, but it doesn't
seem necessary to refer it from here.

Peter Geoghegan

I missed a restriction that commit f4abd024
should have enforced: we can't pull up an empty-FROM subquery if it's under
an outer join, because then we'd need to wrap its output columns in
PlaceHolderVars.  As the code currently stands, the PHVs end up with empty
relid sets, which doesn't work (and is correctly caught by an Assert).

It's possible that this could be fixed by assigning the PHVs the relid
sets of the parent FromExpr/JoinExpr, but getting that to work is more
complication than I care to add right now; indeed it's likely that
we'll never bother, since pulling up empty-FROM subqueries is a rather
marginal optimization anyway.

Per report from Andreas Seltenreich.  Back-patch to 9.5 where the faulty
code was added.

The planner generally expects that the estimated rowcount of any relation
is at least one row, *unless* it has been proven empty by constraint
exclusion or similar mechanisms, which is marked by installing a dummy path
as the rel's cheapest path (cf. IS_DUMMY_REL).  When I split up
allpaths.c's processing of base rels into separate set_base_rel_sizes and
set_base_rel_pathlists steps, the intention was that dummy rels would get
marked as such during the "set size" step; this is what justifies an Assert
in indxpath.c's get_loop_count that other relations should either be dummy
or have positive rowcount.  Unfortunately I didn't get that quite right
for append relations: if all the child rels have been proven empty then
set_append_rel_size would come up with a rowcount of zero, which is
correct, but it didn't then do set_dummy_rel_pathlist.  (We would have
ended up with the right state after set_append_rel_pathlist, but that's
too late, if we generate indexpaths for some other rel first.)

In addition to fixing the actual bug, I installed an Assert enforcing this
convention in set_rel_size; that then allows simplification of a couple
of now-redundant tests for zero rowcount in set_append_rel_size.

Also, to cover the possibility that third-party FDWs have been careless
about not returning a zero rowcount estimate, apply clamp_row_est to
whatever an FDW comes up with as the rows estimate.

Per report from Andreas Seltenreich.  Back-patch to 9.2.  Earlier branches
did not have the separation between set_base_rel_sizes and
set_base_rel_pathlists steps, so there was no intermediate state where an
appendrel would have had inconsistent rowcount and pathlist.  It's possible
that adding the Assert to set_rel_size would be a good idea in older
branches too; but since they're not under development any more, it's likely
not worth the trouble.

ON CONFLICT unique index inference had a thinko that could affect cases
where the user-supplied inference clause required that an attribute
match a particular (user specified) collation and/or opclass.

infer_collation_opclass_match() has to check for opclass and/or
collation matches and that the attribute is in the list of attributes or
expressions known to be in the definition of the index under
consideration. The bug was that these two conditions weren't necessarily
evaluated for the same index attribute.

Author: Peter Geoghegan
Discussion: CAM3SWZR4uug=WvmGk7UgsqHn2MkEzy9YU-+8jKGO4JPhesyeWg@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced

Previously nested grouping set specifications accidentally weren't
flattened, but instead contained the nested specification as a element
in the outer list.

Fix this by, as actually documented in comments, concatenating the
nested set specification into the outer one. Also add tests to prevent
this from breaking again.

Author: Andrew Gierth, with tests from Jeevan Chalke
Reported-By: Jeevan Chalke
Discussion: CAM2+6=V5YvuxB+EyN4iH=GbD-XTA435TCNvnDFSD--YvXs+pww@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced

Previously we disallowed pushing down quals to WHERE in the presence of
grouping sets. That's overly restrictive.

We now instead copy quals to WHERE if applicable, leaving the
one in HAVING in place. That's because, at that stage of the planning
process, it's nontrivial to determine if it's safe to remove the one in
HAVING.

Author: Andrew Gierth
Discussion: 874mkt3l59.fsf@news-spur.riddles.org.uk
Backpatch: 9.5, where grouping sets were introduced. This isn't exactly
    a bugfix, but it seems better to keep the branches in sync at this point.

Previously GROUPING() was not recognized as a aggregate expression,
erroneously allowing the planner to move it from HAVING to WHERE.

Author: Jeevan Chalke
Reviewed-By: Andrew Gierth
Discussion: CAM2+6=WG9omG5rFOMAYBweJxmpTaapvVp5pCeMrE6BfpCwr4Og@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced

The previous coding frequently failed to fail because for one it's
unusual to have rollup clauses with one column, and for another
sometimes the wrong mapping didn't cause obvious problems.

Author: Jeevan Chalke
Reviewed-By: Andrew Gierth
Discussion: CAM2+6=W=9=hQOipH0HAPbkun3Z3TFWij_EiHue0_6UX=oR=1kw@mail.gmail.com
Backpatch: 9.5, where grouping sets were introduced

Wrap the literals on, off, force, and BYPASSRLS with appropriate
markup. Per Kevin Grittner.

Some of the older OS X critters in the buildfarm are failing regression,
with symptoms showing that a request for 100% sampling in BERNOULLI or
SYSTEM methods actually gets only around 50% of the table.  gdb revealed
that the computation of the "cutoff" number was producing 0x7FFFFFFF
rather than the expected 0x100000000.  Inspecting the assembly code,
it looks like gcc is trying to use lrint() instead of rint() and then
fumbling the conversion from long double to uint64.  This seems like a
clear compiler bug, but assigning the intermediate result into a plain
double variable works around it, so let's just do that.  (Another idea
would be to give up one bit of hash width so that we don't need to use
a uint64 cutoff, but let's see if this is enough.)

This was broken by commit 0e7e355f and
friends, which ignored the fact that gzopen() will treat "-1" in the
mode argument as an invalid character, which it ignores, and a flag for
compression level 1. Now, when this value is encountered no compression
level flag is passed  to gzopen, leaving it to use the zlib default.

Also, enforce the documented allowed range for pg_dump's -Z option,
namely 0 .. 9, and remove some consequently dead code from
pg_backup_tar.c.

Problem reported by Marc Mamin.

Backpatch to 9.1, like the patch that introduced the bug.

Buildfarm member hornet, at least, seems to want -lm in the link command.
Probably this is due to the just-added use of isnan().

Any error other than ENOENT is a bit suspicious here, and perhaps should
not be grounds for assuming the postmaster has failed.  For the moment
though, just report it, and don't change the behavior otherwise.  The
intent is mainly to try to determine why we are seeing intermittent
failures in this area on some buildfarm members.

Back-patch to 9.5 where some of these failures have happened.

New FK relationships for pg_transform.  Also findoidjoins now detects a few
relationships it didn't before for pre-existing catalogs, as a result of
new regression tests leaving entries in those catalogs that weren't there
before.

The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM.  (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.)  Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type.  This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.

Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.

Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.

Back-patch to 9.5 so that we don't have to support the original API
in production.

UPDATE ... WHERE CURRENT OF would not work in conjunction with
RLS. Arrange to allow the CURRENT OF expression to be pushed down.
Issue noted by Peter Geoghegan. Patch by Dean Rasheed. Back patch
to 9.5 where RLS was introduced.

The wrong is_null flag was being passed to datum_to_json. Also, null
object key values are not permitted, and this was not being checked
for. Add regression tests covering these cases, and also add those tests
to the json set, even though it was doing the right thing.

Fixes bug #13514, initially diagnosed by Tom Lane.

Handling of assigned-to expressions with indirection (e.g. set f1[1] =
3) was broken for ON CONFLICT DO UPDATE.  The problem was that
ParseState was consulted to determine if an INSERT-appropriate or
UPDATE-appropriate behavior should be used when transforming expressions
with indirections. When the wrong path was taken the old row was
substituted with NULL, leading to wrong results..

To fix remove p_is_update and only use p_is_insert to decide how to
transform the assignment expression, and uset p_is_insert while parsing
the on conflict statement. This isn't particularly pretty, but it's not
any worse than before.

Author: Peter Geoghegan, slightly edited by me
Discussion: CAM3SWZS8RPvA=KFxADZWw3wAHnnbxMxDzkEC6fNaFc7zSm411w@mail.gmail.com
Backpatch: 9.5, where the feature was introduced

dbf2ec1a changed make check so that the installation logs get directed
to stdout and stderr. Per discussion on -hackers, this patch restores
saving it to a file. It is now saved in /tmp_install/log, which is
created once per invocation of any make target doing regression tests.

Along the way, add a missing /log/ entry to test_ddl_deparse's
.gitignore.

Michael Paquier.

If there were no subtransactions (or multixacts) active, we would calculate
the oldestxid == next xid. That's correct, but if next XID happens to be
on the next pg_subtrans (pg_multixact) page, the page does not exist yet,
and SimpleLruTruncate will produce an "apparent wraparound" warning. The
warning is harmless in this case, but looks very alarming to users.

Backpatch to all supported versions. Patch and analysis by Thomas Munro.

The TABLESAMPLE and row security patches each overlooked this function,
though their errors of omission were opposite: RLS failed to zero out the
securityQuals field, leading to wasteful copying of useless expression
trees in finished plans, while TABLESAMPLE neglected to add a comment
saying that it intentionally *isn't* deleting the tablesample subtree.
There probably should be a similar comment about ctename, too.

Back-patch as appropriate.

Uriy Zhuravlev and Alexander Korotkov, reviewed by Jeff Janes, some cleanup
by me.

Remove HeapScanDescData.rs_initblock, which wasn't being used for anything
in the final version of the patch.

Fix IndexBuildHeapScan so that it supports syncscan again; the patch
broke synchronous scanning for index builds by forcing rs_startblk
to zero even when the caller did not care about that and had asked
for syncscan.

Add some commentary and usage defenses to heap_setscanlimits().

Fix heapam so that asking for rs_numblocks == 0 does what you would
reasonably expect.  As coded it amounted to requesting a whole-table
scan, because those "--x <= 0" tests on an unsigned variable would
behave surprisingly.

initdb.log and postmaster.log were moved to within the temporary instance
path by commit dcae5fac. This directory now gets removed at the end
of the run of pg_regress when there are no failures found, which makes
analysis of after-run issues difficult in some cases, and reduces the
output verbosity of the buildfarm after a run.

Fix by Michael Paquier

Backpatch to 9.5

This was forgotten in cac76582 (and its fixup ad89a5d1).  Since it
seems way too easy to miss this, this commit also introduces a mechanism
to enforce that the array is consistent with the enum.

Problem reported independently by Robert Haas and Jaimin Pan.
Patches proposed by Jaimin Pan, Jim Nasby, Michael Paquier and myself,
though I didn't use any of these and instead went with a cleaner
approach suggested by Tom Lane.

Backpatch to 9.5.

Discussion:
https://www.postgresql.org/message-id/CA+Tgmoa6SgDaxW_n_7SEhwBAc=mniYga+obUj5fmw4rU9_mLvA@mail.gmail.com
https://www.postgresql.org/message-id/29788.1437411581@sss.pgh.pa.us

There was already a sanity-check in the other direction: if a page was
marked with WILL_INIT, it had to be initialized by the redo routine. It's
not strictly necessary for correctness that a page is marked with WILL_INIT
if it's going to be initialized at redo, but it's a missed optimization if
nothing else.

Fix a few instances of this issue in SP-GiST, where a block in WAL record
was not marked with WILL_INIT, but was in fact always initialized at redo.
We were creating a full-page image of the page unnecessarily in those
cases.

Backpatch to 9.5, where the new WILL_INIT flag was added.

Since those role specifiers are checked in the grammar, there's no need
for the old checks to remain in place after 31eae602.  Remove them.

Backpatch to 9.5.

Noted and patch by Jeevan Chalke

to make it faster to implement indexed queries where some keys are
common and some are rare.

Patch by Jeff Janes

Backpatch to 9.5.

Author: Pavel Stěhule

As reported by Bill Parker, PL/Tcl did not validate some malloc() calls
against NULL return.  Fix by using palloc() in a new long-lived memory
context instead.  This allows us to simplify error handling too, by
simply deleting the memory context instead of doing retail frees.

There's still a lot that could be done to improve PL/Tcl's memory
handling ...

This is pretty ancient, so backpatch all the way back.

Author: Michael Paquier and Álvaro Herrera
Discussion: https://www.postgresql.org/message-id/CAFrbyQwyLDYXfBOhPfoBGqnvuZO_Y90YgqFM11T2jvnxjLFmqw@mail.gmail.com

This removes some info about support procedures being used, which was
obsoleted by commit db5f98ab, as well as add some more documentation
on how to create new opclasses using the Minmax infrastructure.
(Hopefully we can get something similar for Inclusion as well.)

In passing, fix some obsolete mentions of "mmtuples" in source code
comments.

Backpatch to 9.5, where BRIN was introduced.