Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past.  VACUUM checks the age of the table dynamically, at regular
intervals.

When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced.  VACUUM will stop applying any cost-based delay that may be
in effect.  VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required.  Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.

It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing.   An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards.  Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.

The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age.  There are no equivalent reloptions,
since that isn't expected to be useful.  The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.

Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com

Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.

Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.

Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.

For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.

Bump catalog version.

Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol

Author: Julien Rouhaud

Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu

First, don't perform database access while holding a buffer lock.
When checking a heap, we can validate that TOAST pointers are sane by
performing a scan on the TOAST index and looking up the chunks that
correspond to each value ID that appears in a TOAST poiner in the main
table. But, to do that while holding a buffer lock at least risks
causing other backends to wait uninterruptibly, and probably can cause
undetected and uninterruptible deadlocks.  So, instead, make a list of
checks to perform while holding the lock, and then perform the checks
after releasing it.

Second, adjust things so that we don't try to follow TOAST pointers
for tuples that are already eligible to be pruned. The TOAST tuples
become eligible for pruning at the same time that the main tuple does,
so trying to check them may lead to spurious reports of corruption,
as observed in the buildfarm. The necessary infrastructure to decide
whether or not the tuple being checked is prunable was added by
commit 3b6c1259, but it wasn't
actually used for its intended purpose prior to this patch.

Mark Dilger, adjusted by me to avoid a memory leak.

Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com

Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default).  It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.

To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.

Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol

Author: Julien Rouhaud

Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu

This fails on older OpenSSL versions that lack channel binding
support.  Since that feature is not essential to this test case,
just remove it, instead of complicating matters.  Per buildfarm.

Jacob Champion

Discussion: https://postgr.es/m/fa8dbbb58c20b1d1adf0082769f80d5466eaf485.camel@vmware.com

Amit Langote

Discussion: https://postgr.es/m/CA+HiwqEcawatEaUh1uTbZMEZTJeLzbroRTz9_X9Z5CFjTWJkhw@mail.gmail.com

Commit 3b6c1259 resulted in the same
xmin and xmax bounds checking being performed in both check_tuple()
and check_tuple_visibility(). Remove the duplication.

While at it, adjust some code comments that were overlooked in that
commit.

Mark Dilger

Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com

Teach VACUUM to truncate the line pointer array of each heap page when a
contiguous group of LP_UNUSED line pointers appear at the end of the
array -- these unused and unreferenced items are excluded.  This process
occurs during VACUUM's second pass over the heap, right after LP_DEAD
line pointers on the page (those encountered/pruned during the first
pass) are marked LP_UNUSED.

Truncation avoids line pointer bloat with certain workloads,
particularly those involving continual range DELETEs and bulk INSERTs
against the same table.

Also harden heapam code to check for an out-of-range page offset number
in places where we weren't already doing so.

Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAEze2WjgaQc55Y5f5CQd3L=eS5CZcff2Obxp=O6pto8-f0hC4w@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzn6a64PJM1Ggzm=uvx2otsopJMhFQj_g1rAj4GWr3ZSzw@mail.gmail.com

Formerly we were pretty lax about what a custom GUC's name could
be; so long as it had at least one dot in it, we'd take it.
However, corner cases such as dashes or equal signs in the name
would cause various bits of functionality to misbehave.  Rather
than trying to make the world perfectly safe for that, let's
just require that custom names look like "identifier.identifier",
where "identifier" means something that scan.l would accept
without double quotes.

Along the way, this patch refactors things slightly in guc.c
so that find_option() is responsible for reporting GUC-not-found
cases, allowing removal of duplicative code from its callers.

Per report from Hubert Depesz Lubaczewski.  No back-patch,
since the consequences of the problem don't seem to warrant
changing behavior in stable branches.

Discussion: https://postgr.es/m/951335.1612910077@sss.pgh.pa.us

The code in bringetbitmap() simply added the whole matching page range
to the TID bitmap, as determined by pages_per_range, even if some of the
pages were beyond the end of the heap. The query then might fail with
an error like this:

  ERROR:  could not open file "base/20176/20228.2" (target block
          262144): previous segment is only 131021 blocks

In this case, the relation has 262093 pages (131072 and 131021 pages),
but we're trying to acess block 262144, i.e. first block of the 3rd
segment. At that point _mdfd_getseg() notices the preceding segment is
incomplete, and fails.

Hitting this in practice is rather unlikely, because:

* Most indexes use power-of-two ranges, so segments and page ranges
  align perfectly (segment end is also a page range end).

* The table size has to be just right, with the last segment being
  almost full - less than one page range from full segment, so that the
  last page range actually crosses the segment boundary.

* Prefetch has to be enabled. The regular page access checks that
  pages are not beyond heap end, but prefetch does not. On older
  releases (before 12) the execution stops after hitting the first
  non-existent page, so the prefetch distance has to be sufficient
  to reach the first page in the next segment to trigger the issue.
  Since 12 it's enough to just have prefetch enabled, the prefetch
  distance does not matter.

Fixed by not adding non-existent pages to the TID bitmap. Backpatch
all the way back to 9.6 (BRIN indexes were introduced in 9.5, but that
release is EOL).

Backpatch-through: 9.6

By default, have libpq set the TLS extension "Server Name Indication" (SNI).

This allows an SNI-aware SSL proxy to route connections.  (This
requires a proxy that is aware of the PostgreSQL protocol, not just
any SSL proxy.)

In the future, this could also allow the server to use different SSL
certificates for different host specifications.  (That would require
new server functionality.  This would be the client-side functionality
for that.)

Since SNI makes the host name appear in cleartext in the network
traffic, this might be undesirable in some cases.  Therefore, also add
a libpq connection option "sslsni" to turn it off.

Discussion: https://www.postgresql.org/message-id/flat/7289d5eb-62a5-a732-c3b9-438cee2cb709%40enterprisedb.com

The previous implementation (from 9afffcb8) had an unnecessary check
on the boundaries of the enum which trigtered compile warnings. To clean
it up, move the pre-existing static assert to a central location and
call that.

Reported-By: Erik Rijkers
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/1056399262.13159.1617793249020@webmailclassic.xs4all.nl

Discussion: https://www.postgresql.org/message-id/flat/161626776179.652.11944895442156126506%40wrigleys.postgresql.org

This reverts commit 9f984ba6.

It was making the buildfarm unhappy, apparently setting client_min_messages
in a regression test produces different output if log_statement='all'.
Another issue is that I now suspect the bit sortsupport function was in
fact not correct to call byteacmp(). Revert to investigate both of those
issues.

Commit 16fa9b2b introduced a faster way to build GiST indexes, by
sorting all the data. This commit adds the sortsupport functions needed
to make use of that feature for btree_gist.

Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/2F3F7265-0D22-44DB-AD71-8554C743D943@yandex-team.ru

Documentation and comments in code and tests have been using the terms
sensitive/insensitive cursor incorrectly relative to the SQL standard.
(Cursor sensitivity is only relevant for changes made in the same
transaction as the cursor, not for concurrent changes in other
sessions.)  Moreover, some of the behavior of PostgreSQL is incorrect
according to the SQL standard, confusing the issue further.  (WHERE
CURRENT OF changes are not visible in insensitive cursors, but they
should be.)

This change corrects the terminology and removes the claim that
sensitive cursors are supported.  It also adds a test case that checks
the insensitive behavior in a "correct" way, using a change command
not using WHERE CURRENT OF.  Finally, it adds the ASENSITIVE cursor
option to select the default asensitive behavior, per SQL standard.

There are no changes to cursor behavior in this patch.

Discussion: https://www.postgresql.org/message-id/flat/96ee8b30-9889-9e1b-b053-90e10c050e85%40enterprisedb.com

The previous wording contained a superfluous comma.  Adjust phrasing
for grammatical correctness and clarity.

Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space.  Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them.  GiST was not doing this
extra call, but has commented out a system call that did so since
62369911.

While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that.  This makes the whole page initialization logic more consistent
across all index AMs.

Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com

The "authenticated identity" is the string used by an authentication
method to identify a particular user.  In many common cases, this is the
same as the PostgreSQL username, but for some third-party authentication
methods, the identifier in use may be shortened or otherwise translated
(e.g. through pg_ident user mappings) before the server stores it.

To help administrators see who has actually interacted with the system,
this commit adds the capability to store the original identity when
authentication succeeds within the backend's Port, and generates a log
entry when log_connections is enabled.  The log entries generated look
something like this (where a local user named "foouser" is connecting to
the database as the database user called "admin"):

  LOG:  connection received: host=[local]
  LOG:  connection authenticated: identity="foouser" method=peer (/data/pg_hba.conf:88)
  LOG:  connection authorized: user=admin database=postgres application_name=psql

Port->authn_id is set according to the authentication method:

  bsd: the PostgreSQL username (aka the local username)
  cert: the client's Subject DN
  gss: the user principal
  ident: the remote username
  ldap: the final bind DN
  pam: the PostgreSQL username (aka PAM username)
  password (and all pw-challenge methods): the PostgreSQL username
  peer: the peer's pw_name
  radius: the PostgreSQL username (aka the RADIUS username)
  sspi: either the down-level (SAM-compatible) logon name, if
        compat_realm=1, or the User Principal Name if compat_realm=0

The trust auth method does not set an authenticated identity.  Neither
does clientcert=verify-full.

Port->authn_id could be used for other purposes, like a superuser-only
extra column in pg_stat_activity, but this is left as future work.

PostgresNode::connect_{ok,fails}() have been modified to let tests check
the backend log files for required or prohibited patterns, using the
new log_like and log_unlike parameters.  This uses a method based on a
truncation of the existing server log file, like issues_sql_like().
Tests are added to the ldap, kerberos, authentication and SSL test
suites.

Author: Jacob Champion
Reviewed-by: Stephen Frost, Magnus Hagander, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/c55788dd1773c521c862e8e0dddb367df51222be.camel@vmware.com

The buildfarm members "drongo" and "fairywren" reported that
the regression test (024_archive_recovery.pl) added by commit 9de9294b
failed. The cause of this failure is that the test calls $node->init()
without "allows_streaming => 1" and which doesn't add pg_hba.conf
entry for TCP/IP connection from pg_basebackup.
This commit fixes the issue by specifying "allows_streaming => 1"
when calling $node->init().

Author: Fujii Masao
Discussion: https://postgr.es/m/3cc3909d-f779-7a74-c201-f1f7f62c7497@oss.nttdata.com

Delay creation of the projections for INSERT and UPDATE tuples
until they're needed.  This saves a pretty fair amount of work
when only some of the partitions are actually touched.

The logic associated with identifying junk columns in UPDATE/DELETE
is moved to another loop, allowing removal of one loop over the
target relations; but it didn't actually change at all.

Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.

Amit Langote, reviewed at different times by Heikki Linnakangas and
myself

Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com

DEBUG was already defined by the MSVC toolchain for "Debug" builds. On
these systems the unconditional #define DEBUG was causing a 'DEBUG': macro
redefinition warning.

Here we rename DEBUG to DEBUG_OUPUT and also get rid of the #define which
defined this constant.  This appears to have been left in the code by
mistake.

Discussion: https://postgr.es/m/CAApHDvqTTgDm38s4HRj03nhzhzQ1oMOj-RXFUB1pE6Bj07jyuQ@mail.gmail.com

Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:

* Don't open result relations' indexes until needed.

* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.

This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable.  Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.

Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node.  Instead
use the hash added to ModifyTable itself by commit 86dc9005.

To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos.  We formerly set it
only in some, not terribly well-defined, cases.  This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too).  It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.

Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.

Amit Langote, reviewed at different times by Heikki Linnakangas and
myself

Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com

Commit f49bcd4e disallowed postgres_fdw to import table partitions.
Because all data can be accessed through the partitioned table which
is the root of the partitioning hierarchy, importing only partitioned
table should allow access to all the data without creating extra objects.
This is a reasonable default when importing a whole schema. But there
may be the case where users want to explicitly import one of
a partitioned tables' partitions.

For that use case, this commit allows postgres_fdw to import tables or
foreign tables which are partitions of some other table only when they
are explicitly specified in LIMIT TO clause.  It doesn't change
the behavior that any partitions not specified in LIMIT TO are
automatically excluded in IMPORT FOREIGN SCHEMA command.

Author: Matthias van de Meent
Reviewed-by: Bernd Helmle, Amit Langote, Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/CAEze2Whwg4i=mzApMe+PXxCEfgoZmHGqdqQFW7J4bmj_5p6t1A@mail.gmail.com

Snapshot caching, introduced in 623a9ba7, did not increment
xactCompletionCount during subtransaction abort. That could lead to an older
snapshot being reused. That is, at least as far as I can see, not a
correctness issue (for MVCC snapshots there's no difference between "in
progress" and "aborted"). The only difference between the old and new
snapshots would be a newer ->xmax.

While HeapTupleSatisfiesMVCC makes the same visibility determination, reusing
the old snapshot leads HeapTupleSatisfiesMVCC to not set
HEAP_XMIN_INVALID. Which subsequently causes the kill_prior_tuple optimization
to not kick in (via HeapTupleIsSurelyDead() returning false). The performance
effects of doing the same index-lookups over and over again is how the issue
was discovered...

Fix the issue by incrementing xactCompletionCount in
XidCacheRemoveRunningXids. It already acquires ProcArrayLock exclusively,
making that an easy proposition.

Add a test to ensure that kill_prior_tuple prevents index growth when it
involves aborted subtransaction of the current transaction.

Author: Andres Freund
Discussion: https://postgr.es/m/20210406043521.lopeo7bbigad3n6t@alap3.anarazel.de
Discussion: https://postgr.es/m/20210317055718.v6qs3ltzrformqoa%40alap3.anarazel.de

Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows.  Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step.  This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).

Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria.  The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself.  Now there are no special cases.  And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.

Also remove XLOG_HEAP2_CLEANUP_INFO records.  These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts.  There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed.  This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases.  The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).

Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass.  A regular exclusive lock is
enough.  This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED.  No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.

Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning.  Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains).  Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.

Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.

Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.

Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com

Per cpluspluscheck.

Previously, psql printed only the last result if a command string
returned multiple result sets.  Now it prints all of them.  The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.

Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre

Handling of incompatible clauses while applying extended statistics was
a bit confused - while handling a mix of compatible and incompatible
clauses it sometimes incorrectly treated the incompatible clauses as
compatible, resulting in a crash.

Fixed by reworking the code applying the selected statistics object to
make it easier to understand, and adding a proper compatibility check.

Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvpYT10-nkSp8xXe-nbO3jmoaRyRFHbzh-RWMfAJynqgpQ%40mail.gmail.com

Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune().  This is a great deal cleaner.  The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point.  This division is
enforced by the way in which we now manage state.  lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM).  It doesn't get passed any special
instructional state from the preamble code, though.

Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs.  The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM.  The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place.  The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.

Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off.  The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.

Also fix a very old bug in single-pass VACUUM VERBOSE output.  We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap.  But that
doesn't work at all -- they're two different things.

To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead.  A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)

Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output.  This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items).  VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap).  This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)

Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead.  This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed).  An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.

Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com

Andrew Gierth reported that it's possible to crash the backend if no
pg_attrdef record is found to match an attribute that has atthasdef set.
AttrDefaultFetch warns about this situation, but then leaves behind
a relation tupdesc that has null "adbin" pointer(s), which most places
don't guard against.

We considered promoting the warning to an error, but throwing errors
during relcache load is pretty drastic: it effectively locks one out
of using the relation at all.  What seems better is to leave the
load-time behavior as a warning, but then throw an error in any code
path that wants to use a default and can't find it.  This confines
the error to a subset of INSERT/UPDATE operations on the table, and
in particular will at least allow a pg_dump to succeed.

Also, we should fix AttrDefaultFetch to not leave any null pointers
in the tupdesc, because that just creates an untested bug hazard.

While at it, apply the same philosophy of "warn at load, throw error
only upon use of the known-missing info" to CHECK constraints.
CheckConstraintFetch is very nearly the same logic as AttrDefaultFetch,
but for reasons lost in the mists of time, it was throwing ERROR for
the same cases that AttrDefaultFetch treats as WARNING.  Make the two
functions more nearly alike.

In passing, get rid of potentially-O(N^2) loops in equalTupleDesc
by making AttrDefaultFetch sort the entries after fetching them,
so that equalTupleDesc can assume that entries in two equal tupdescs
must be in matching order.  (CheckConstraintFetch already was sorting
CHECK constraints, but equalTupleDesc hadn't been told about it.)

There's some argument for back-patching this, but with such a small
number of field reports, I'm content to fix it in HEAD.

Discussion: https://postgr.es/m/87pmzaq4gx.fsf@news-spur.riddles.org.uk

Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.

To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.

The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.

Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.

Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com

Reported-by: Jaime Casanova, using SQLsmith
Discussion: https://www.postgresql.org/message-id/20210402235337.GA4082@ahch-to

This adds a new function, permute(), that generates pseudorandom
permutations of arbitrary sizes. This can be used to randomly shuffle
a set of values to remove unwanted correlations. For example,
permuting the output from a non-uniform random distribution so that
all the most common values aren't collocated, allowing more realistic
tests to be performed.

Formerly, hash() was recommended for this purpose, but that suffers
from collisions that might alter the distribution, so recommend
permute() for this purpose instead.

Fabien Coelho and Hironobu Suzuki, with additional hacking be me.
Reviewed by Thomas Munro, Alvaro Herrera and Muhammad Usama.

Discussion: https://postgr.es/m/alpine.DEB.2.21.1807280944370.5142@lancre

Adjust the number of events given to WaitEventSetWait() so that it
doesn't exceed the maximum number of events in the WaitEventSet given
to that function (set->nevents_space) in hopes of making the buildfarm
green.

Per valgrind failure report from Tom Lane and the buildfarm.

Author: Etsuro Fujita
Discussion: https://postgr.es/m/3411577.1617289776%40sss.pgh.pa.us

At present, if we want to update publications in a subscription, we
can use SET PUBLICATION.  However, it requires supplying all
publications that exists and the new publications.  If we want to add
new publications, it's inconvenient.  The new syntax only supplies the
new publications.  When the refresh is true, it only refreshes the new
publications.

Author: Japin Li <japinli@hotmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/MEYP282MB166939D0D6C480B7FBE7EFFBB6BC0@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM

In the tests, after disabling the subscription, we were not waiting for
the replication connection to drop from the publisher. So when the test
was trying to use the same slot to fetch the messages via SQL API, it
sometimes gives an error that the replication slot is active for other
PID.

Per buildfarm.

It seems that in MSVC timeval's tv_sec field is of type long.
localtime() takes a time_t pointer.  Since long is 32-bit even on 64-bit
builds in MSVC, passing a long pointer instead of the correct time_t
pointer generated a compiler warning.  Fix that.

Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvoRG25X_=ZCGSPb4KN_j2iu=G2uXsRSg8NBZeuhkOSETg@mail.gmail.com

The previous implementation of EXTRACT mapped internally to
date_part(), which returned type double precision (since it was
implemented long before the numeric type existed).  This can lead to
imprecise output in some cases, so returning numeric would be
preferrable.  Changing the return type of an existing function is a
bit risky, so instead we do the following:  We implement a new set of
functions, which are now called "extract", in parallel to the existing
date_part functions.  They work the same way internally but use
numeric instead of float8.  The EXTRACT construct is now mapped by the
parser to these new extract functions.  That way, dumps of views
etc. from old versions (which would use date_part) continue to work
unchanged, but new uses will map to the new extract functions.

Additionally, the reverse compilation of EXTRACT now reproduces the
original syntax, using the new mechanism introduced in
40c24bfe.

The following minor changes of behavior result from the new
implementation:

- The column name from an isolated EXTRACT call is now "extract"
  instead of "date_part".

- Extract from date now rejects inappropriate field names such as
  HOUR.  It was previously mapped internally to extract from
  timestamp, so it would silently accept everything appropriate for
  timestamp.

- Return values when extracting fields with possibly fractional
  values, such as second and epoch, now have the full scale that the
  value has internally (so, for example, '1.000000' instead of just
  '1').
Reported-by: Petr Fedorov <petr.fedorov@phystech.edu>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu

Introduced by 98681675.

Author: Vignesh C
Discussion: https://postgr.es/m/CALDaNm1DqgaLBAJrtGznKk1sR1mH-augmp7LfGvxWwTUhah+rg@mail.gmail.com