If we run out of space in the checkpointer sync request queue (which is
hopefully rare on real systems, but common with very small buffer pool),
we wait for it to drain.  While waiting, we should report that as a wait
event so that users know what is going on, and also handle postmaster
death, since otherwise the loop might never terminate if the
checkpointer has exited.

Back-patch to 12.  Although the problem exists in earlier releases too,
the code is structured differently before 12 so I haven't gone any
further for now, in the absence of field complaints.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de

This commit fixes a set of issues related to the use of the SQL
functions in this module when the caller is able to pass down raw page
data as input argument:
- The page size check was fuzzy in a couple of places, sometimes
looking after only a sub-range, but what we are looking for is an exact
match on BLCKSZ.  After considering a few options here, I have settled
down to do a generalization of get_page_from_raw().  Most of the SQL
functions already used that, and this is not strictly required if not
accessing an 8-byte-wide value from a raw page, but this feels safer in
the long run for alignment-picky environment, particularly if a code
path begins to access such values.  This also reduces the number of
strings that need to be translated.
- The BRIN function brin_page_items() uses a Relation but it did not
check the access method of the opened index, potentially leading to
crashes.  All the other functions in need of a Relation already did
that.
- Some code paths could fail on elog(), but we should to use ereport()
for failures that can be triggered by the user.

Tests are added to stress all the cases that are fixed as of this
commit, with some junk raw pages (\set VERBOSITY ensures that this works
across all page sizes) and unexpected index types when functions open
relations.

Author: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/20220218030020.GA1137@telsasoft.com
Backpatch-through: 10

The checkpointer shouldn't ignore its latch.  Other backends may be
waiting for it to drain the request queue.  Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.

This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.

Back-patch only to 14.  Even though the problem exists in earlier
branches too, it's hard to hit there.  In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de

Since LLVM 14 has stopped changing and is about to be released,
back-patch the following changes from the master branch:

  e6a7600202105919bffd62b3dfd941f4a94e082b
  807fee1a39de6bb8184082012e643951abb9ad1d
  a56e7b66010f330782243de9e25ac2a6596be0e1

Back-patch to 11, where LLVM JIT support came in.

Commit 8b069ef5 changed this function to look at pg_constraint.conindid
rather than searching pg_depend.  That was a good performance improvement,
but it failed to preserve the exact semantics.  The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints.  This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
    ERROR:  relation 146621 has multiple clustered indexes
or
    ERROR:  "pk_attbl" is not an index for table "atref"

We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index().  Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.

Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.

Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org

ALTER ROUTINE triggers the events ddl_command_start and ddl_command_end,
and DROP ROUTINE triggers sql_drop, ddl_command_start and
ddl_command_end, but this was not mention on the matrix table.

Reported-by: Leslie Lemaire
Discussion: https://postgr.es/m/164647533363.646.5802968483136493025@wrigleys.postgresql.org
Backpatch-through: 11

Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180.  Developers may see faster failures by setting that
environment variable to some lesser number of seconds.  In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180.  This change raises the default for some briefer
timeouts.  Back-patch to v10 (all supported versions).

Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com

pg_regress reported "Unix socket" as the default location whenever
HAVE_UNIX_SOCKETS is defined.  However, that's not been accurate
on Windows since 8f3ec75d.  Update this logic to match what libpq
actually does now.

This is just cosmetic, but still it's potentially misleading.
Back-patch to v13 where 8f3ec75d came in.

Discussion: https://postgr.es/m/3894060.1646415641@sss.pgh.pa.us

This macro cast the result to BlockNumber after shifting, not before,
which is the wrong thing.  Per the C spec, the uint16 fields would
promote to int not unsigned int, so that (for 32-bit int) the shift
potentially shifts a nonzero bit into the sign position.  I doubt
there are any production systems where this would actually end with
the wrong answer, but it is undefined behavior per the C spec, and
clang's -fsanitize=undefined option reputedly warns about it on some
platforms.  (I can't reproduce that right now, but the code is
undeniably wrong per spec.)  It's easy to fix by casting to
BlockNumber (uint32) in the proper places.

It's been wrong for ages, so back-patch to all supported branches.

Report and patch by Zhihong Yu (cosmetic tweaking by me)

Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com

Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all.  I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.

numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable.  We don't actually use the
result in such a case, so there's no live bug.

Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case.  This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.

Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com

This change makes libpq apply the same private-key-file ownership
and permissions checks that we have used in the backend since commit
9a83564c.  Namely, that the private key can be owned by either the
current user or root (with different file permissions allowed in the
two cases).  This allows system-wide management of key files, which
is just as sensible on the client side as the server, particularly
when the client is itself some application daemon.

Sync the comments about this between libpq and the backend, too.

Back-patch of a59c79564 and 50f03473e into all supported branches.

David Steele

Discussion: https://postgr.es/m/f4b7bc55-97ac-9e69-7398-335e212f7743@pgmasters.net

Perl can be convinced to execute user-defined code during compilation
of a plperl function (or at least a plperlu function).  That's not
such a big problem as long as the activity is confined within the
Perl interpreter, and it's not clear we could do anything about that
anyway.  However, if such code tries to use plperl's SPI functions,
we have a bigger problem.  In the first place, those functions are
likely to crash because current_call_data->prodesc isn't set up yet.
In the second place, because it isn't set up, we lack critical info
such as whether the function is supposed to be read-only.  And in
the third place, this path allows code execution during function
validation, which is strongly discouraged because of the potential
for security exploits.  Hence, reject execution of the SPI functions
until compilation is finished.

While here, add check_spi_usage_allowed() calls to various functions
that hadn't gotten the memo about checking that.  I think that perhaps
plperl_sv_to_literal may have been intentionally omitted on the grounds
that it was safe at the time; but if so, the addition of transforms
functionality changed that.  The others are more recently added and
seem to be flat-out oversights.

Per report from Mark Murawski.  Back-patch to all supported branches.

Discussion: https://postgr.es/m/9acdf918-7fff-4f40-f750-2ffa84f083d2@intellasoft.net

When opening a WAL file smaller than XLOG_BLCKSZ (e.g. 0 bytes long) while
determining the wal_segment_size, pg_waldump checked errno, despite errno not
being set by the short read. Resulting in a bogus error message.

Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220214.181847.775024684568733277.horikyota.ntt@gmail.com
Backpatch: 11-, the bug was introducedin fc49e24f

If a checkpoint happens during the index build, and the system crashes
after the checkpoint and the index build have finished, the data written
to the index before the checkpoint started could be lost. The checkpoint
won't have fsync'd it, and it won't be replayed at crash recovery either.
Fix by calling smgrimmedsync() after the index build, just like in B-tree
index build.

Backpatch to v14 where the sorted GiST index build was introduced.

Reported-by: Melanie Plageman
Discussion: https://www.postgresql.org/message-id/CAAKRu_ZJJynimxKj5xYBSziL62-iEtPE+fx-B=JzR=jUtP92mw@mail.gmail.com

Commit 3db826bd intended that valid_custom_variable_name's
rules for valid identifiers match those of scan.l.  However,
I (tgl) had some kind of brain fade and put "_" in the wrong
list.

Fix by Japin Li, per bug #17415 from Daniel Polski.

Discussion: https://postgr.es/m/17415-ebdb683d7e09a51c@postgresql.org

"regress" is a new mode added to compute_query_id aimed at facilitating
regression testing when a module computing query IDs is loaded into the
backend, like pg_stat_statements.  It works the same way as "auto",
meaning that query IDs are computed if a module enables it, except that
query IDs are hidden in EXPLAIN outputs to ensure regression output
stability.

Like any GUCs of the kind (force_parallel_mode, etc.), this new
configuration can be added to an instance's postgresql.conf, or just
passed down with PGOPTIONS at command level.  compute_query_id uses an
enum for its set of option values, meaning that this addition ensures
ABI compatibility.

Using this new configuration mode allows installcheck-world to pass when
running the tests on an instance with pg_stat_statements enabled,
stabilizing the test output while checking the paths doing query ID
computations.

Reported-by: Anton Melnikov
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/1634283396.372373993@f75.i.mail.ru
Discussion: https://postgr.es/m/YgHlxgc/OimuPYhH@paquier.xyz
Backpatch-through: 14

When cleaning up temporary objects during process exit the cleanup could fail
with:
  FATAL: cannot fetch toast data without an active snapshot

The bug is caused by RemoveTempRelationsCallback() not setting up a
snapshot. If an object with toasted catalog data needs to be cleaned up,
init_toast_snapshot() could fail with the above error.

Most of the time however the the problem is masked due to cached catalog
snapshots being returned by GetOldestSnapshot(). But dropping an object can
cause catalog invalidations to be emitted. If no further catalog accesses are
necessary between the invalidation processing and the next toast datum
deletion, the bug becomes visible.

It's easy to miss this bug because it typically happens after clients
disconnect and the FATAL error just ends up in the log.

Luckily temporary table cleanup at the next use of the same temporary schema
or during DISCARD ALL does not have the same problem.

Fix the bug by pushing a snapshot in RemoveTempRelationsCallback(). Also add
isolation tests for temporary object cleanup, including objects with toasted
catalog data.

A future HEAD only commit will add more assertions.

Reported-By: Miles Delahunty
Author: Andres Freund
Discussion: https://postgr.es/m/CAOFAq3BU5Mf2TTvu8D9n_ZOoFAeQswuzk7yziAb7xuw_qyw5gw@mail.gmail.com
Backpatch: 10-

Following migration of Windows buildfarm members running TAP tests to
use of ucrt64 perl for those tests, special processing for msys perl is
no longer necessary and so is removed.

Backpatch to release 10

Discussion: https://postgr.es/m/c65a8781-77ac-ea95-d185-6db291e1baeb@dunslane.net

Commit f1ac4a74de disabled this processing, and as nothing has broken (as
expected) here we proceed to remove the routine and adjust all the call
sites.

Backpatch to release 10

Discussion: https://postgr.es/m/0ba775a2-8aa0-0d56-d780-69427cf6f33d@dunslane.net
Discussion: https://postgr.es/m/20220125023609.5ohu3nslxgoygihl@alap3.anarazel.de

GCC 12 complains that set_stack_base is storing the address of
a local variable in a long-lived pointer.  This is an entirely
reasonable warning (indeed, it just helped us find a bug);
but that behavior is intentional here.  We can work around it
by using __builtin_frame_address(0) instead of a specific local
variable; that produces an address a dozen or so bytes different,
in my testing, but we don't care about such a small difference.
Maybe someday a compiler lacking that function will start to issue
a similar warning, but we'll worry about that when it happens.

Patch by me, per a suggestion from Andres Freund.  Back-patch to
v12, which is as far back as the patch will go without some pain.
(Recently-established project policy would permit a back-patch as
far as 9.2, but I'm disinclined to expend the work until GCC 12
is much more widespread.)

Discussion: https://postgr.es/m/3773792.1645141467@sss.pgh.pa.us

Document that they can be modified using COPY as well.

Back-patch to v11 where commit 3d956d95 added support for COPY in
postgres_fdw.

Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.

Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com

Fix ExecReScanIndexScan() to free the referenced tuples while emptying the
priority queue.  Backpatch to all supported versions.

Discussion: https://postgr.es/m/CAHqSB9gECMENBQmpbv5rvmT3HTaORmMK3Ukg73DsX5H7EJV7jw%40mail.gmail.com
Author: Aliaksandr Kalenik
Reviewed-by: Tom Lane, Alexander Korotkov
Backpatch-through: 10

In commit 1f39a1c0 I made PQisBusy consider conn->write_failed, but
that is now looking like complete brain fade.  In the first place, the
logic is quite wrong: it ought to be like "and not" rather than "or".
This meant that once we'd gotten into a write_failed state, PQisBusy
would always return true, probably causing the calling application to
iterate its loop until PQconsumeInput returns a hard failure thanks
to connection loss.  That's not what we want: the intended behavior
is to return an error PGresult, which the application probably has
much cleaner support for.

But in the second place, checking write_failed here seems like the
wrong thing anyway.  The idea of the write_failed mechanism is to
postpone handling of a write failure until we've read all we can from
the server; so that flag should not interfere with input-processing
behavior.  (Compare 7247e243.)  What we *should* check for is
status = CONNECTION_BAD, ie, socket already closed.  (Most places that
close the socket don't touch asyncStatus, but they do reset status.)
This primarily ensures that if PQisBusy() returns true then there is
an open socket, which is assumed by several call sites in our own
code, and probably other applications too.

While at it, fix a nearby thinko in libpq's my_sock_write: we should
only consult errno for res < 0, not res == 0.  This is harmless since
pqsecure_raw_write would force errno to zero in such a case, but it
still could confuse readers.

Noted by Andres Freund.  Backpatch to v12 where 1f39a1c0 came in.

Discussion: https://postgr.es/m/20220211011025.ek7exh6owpzjyudn@alap3.anarazel.de

createplan.c tries to save a runtime projection step by specifying
a scan plan node's output as being exactly the table's columns, or
index's columns in the case of an index-only scan, if there is not a
reason to do otherwise.  This logic did not previously pay attention
to whether an index's columns are returnable.  That worked, sort of
accidentally, until commit 9a3ddeb51 taught setrefs.c to reject plans
that try to read a non-returnable column.  I have no desire to loosen
setrefs.c's new check, so instead adjust use_physical_tlist() to not
try to optimize this way when there are non-returnable column(s).

Per report from Ryan Kelly.  Like the previous patch, back-patch
to all supported branches.

Discussion: https://postgr.es/m/CAHUie24ddN+pDNw7fkhNrjrwAX=fXXfGZZEHhRuofV_N_ftaSg@mail.gmail.com

"pg_ctl stop/restart" checked that the postmaster PID is valid just
once, as a side-effect of sending the stop signal, and then would
wait-till-timeout for the postmaster.pid file to go away.  This
neglects the case wherein the postmaster dies uncleanly after we
signal it.  Similarly, once "pg_ctl promote" has sent the signal,
it'd wait for the corresponding on-disk state change to occur
even if the postmaster dies.

I'm not sure how we've managed not to notice this problem, but it
seems to explain slow execution of the 017_shm.pl test script on AIX
since commit 4fdbf9af5, which added a speculative "pg_ctl stop" with
the idea of making real sure that the postmaster isn't there.  In the
test steps that kill-9 and then restart the postmaster, it's possible
to get past the initial signal attempt before kill() stops working
for the doomed postmaster.  If that happens, pg_ctl waited till
PGCTLTIMEOUT before giving up ... and the buildfarm's AIX members
have that set very high.

To fix, include a "kill(pid, 0)" test (similar to what
postmaster_is_alive uses) in these wait loops, so that we'll
give up immediately if the postmaster PID disappears.

While here, I chose to refactor those loops out of where they were.
do_stop() and do_restart() can perfectly well share one copy of the
wait-for-stop loop, and it seems desirable to put a similar function
beside that for wait-for-promote.

Back-patch to all supported versions, since pg_ctl's wait logic
is substantially identical in all, and we're seeing the slow test
behavior in all branches.

Discussion: https://postgr.es/m/20220210023537.GA3222837@rfd.leadboat.com

Modern msys systems lack pexports but have gendef instead, so use that.

Discussion: https://postgr.es/m/3ccde7a9-e4f9-e194-30e0-0936e6ad68ba@dunslane.net

Backpatch to release 9.4 to enable building with perl on older branches.
Before that pexports is not used for plperl.

Commit 09cf1d52 taught schedule_alarm() to not do anything if
the next requested event is after when we expect the next interrupt
to fire.  However, if somehow an interrupt gets lost, we'll continue
to not do anything indefinitely, even after the "next interrupt" time
is obviously in the past.  Thus, one missed interrupt can break
timeout scheduling for the life of the session.  Michael Harris
reported a scenario where a bug in a user-defined function caused this
to happen, so you don't even need to assume kernel bugs exist to think
this is worth fixing.  We can make things more robust at little cost
by detecting the case where signal_due_at is before "now" and forcing
a new setitimer call to occur.  This isn't a completely bulletproof
fix of course; but in our typical usage pattern where we frequently set
timeouts and clear them before they are reached, the interrupt will
get re-enabled after at most one timeout interval, which with a little
luck will be before we really need it.

While here, let's mark signal_due_at as volatile, since the signal
handler can both examine and set it.  I'm not sure there's any
actual risk given that signal_pending is already volatile, but
it's surely questionable.

Backpatch to v14 where this logic came in.

Michael Harris and Tom Lane

Discussion: https://postgr.es/m/CADofcAWbMrvgwSMqO4iG_iD3E2v8ZUrC-_crB41my=VMM02-CA@mail.gmail.com

The connection strings in the SSL client tests were using the host
set up from Cluster.pm which is a temporary pathname. When SNI is
enabled we pass the host to OpenSSL in order to set the server name
indication ClientHello extension via SSL_set_tlsext_host_name.

OpenSSL doesn't validate the hostname apart from checking the max
length, but LibreSSL checks for RFC 5890 conformance which results
in errors during testing as the pathname from Cluster.pm is not a
valid hostname.

Fix by setting the host explicitly to localhost, as that's closer
to the intent of the test.

Backpatch through 14 where SNI support came in.
Reported-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/17391-304f81bcf724b58b@postgresql.org
Backpatch-through: 14

Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable.  Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10.  For later branches, this
serves as defense in depth.  Back-patch to v10 (all supported versions).

Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com

Commit 6a2a70a0 supposed that any platform having <sys/epoll.h>
would also have <sys/signalfd.h>.  It turns out there are still a
few people using platforms where that's not so, so we'd better make
a separate configure probe for it.  But since it took this long to
notice, I'm content with the decision to not have a separate code
path for epoll-only machines; we'll just fall back to using poll()
for these stragglers.

Per gripe from Gabriela Serventi.  Back-patch to v14 where this
code came in.

Discussion: https://postgr.es/m/CAHOHWE-JjJDfcYuLAAEO7Jk07atFAU47z8TzHzg71gbC0aMy=g@mail.gmail.com

Recent versions of Devel::PPPort try to redefine eval_pv() to
dodge a bug in pre-5.31 Perl versions.  Unfortunately the redefinition
fails on compilers that don't support statements nested within
expressions.  However, we aren't actually interested in this bug fix,
since we always call eval_pv() with croak_on_error = FALSE.
So, until there's an upstream fix for this breakage, just comment
out the macro to revert to the older behavior.

Per report from Wei Sun, as well as previous buildfarm failure
on pademelon (which I'd unfortunately not looked at carefully
enough to understand the cause).  Back-patch to all supported
versions, since we're using the same ppport.h in all.

Discussion: https://postgr.es/m/tencent_2EFCC8BA0107B6EC0F97179E019A8A43C806@qq.com
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=pademelon&dt=2022-02-02%2001%3A22%3A58

Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 063c497a909612d444c7c7188482db9aef86200f

A very well-informed user might deduce this from what we said already,
but I'd bet against it.  Lay it out explicitly.

While here, rewrite the comment about tuple routing to be more
intelligible to an average SQL user.

Per bug #17395 from Alexander Lakhin.  Back-patch to v11.  (The text
in this area is different in v10 and I'm not sufficiently excited
about this point to adapt the patch.)

Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org

There are two Asserts in nodeMergejoin.c that are reachable if
the input data is not in the expected order.  This seems way too
fragile.  Alexander Lakhin reported a case where the assertions
could be triggered with misconfigured foreign-table partitions,
and bitter experience with unstable operating system collation
definitions suggests another easy route to hitting them.  Neither
Assert is in a place where we can't afford one more test-and-branch,
so replace 'em with plain test-and-elog logic.

Per bug #17395.  While the reported symptom is relatively recent,
collation changes could happen anytime, so back-patch to all
supported branches.

Discussion: https://postgr.es/m/17395-8c326292078d1a57@postgresql.org

As usual, the release notes for older branches will be made by cutting
these down, but put them up for community review first.

Discussion: https://postgr.es/m/20220203183655.ralgkh54sdcgysmn@alap3.anarazel.de
Backpatch: 14-, like f862d57057f

We assume that direct-modify ForeignScan nodes cannot be re-evaluated
during EvalPlanQual processing, but the rework for inherited
UPDATE/DELETE in commit 86dc9005 changed things, without considering
that, so that such ForeignScan nodes get called as part of the
EvalPlanQual subtree during EvalPlanQual processing in the case of an
inherited UPDATE/DELETE where the inheritance set contains foreign
target relations.  To avoid re-evaluating such ForeignScan nodes during
EvalPlanQual processing, commit c3928b467 modified nodeForeignscan.c,
but the assumption made there that ExecForeignScan() should never be
called for such ForeignScan nodes during EvalPlanQual processing turned
out to be wrong in some cases, leading to a segmentation fault or a
"cannot re-evaluate a Foreign Update or Delete during EvalPlanQual"
error.

Fix by modifying nodeForeignscan.c further to avoid re-evaluating such
ForeignScan nodes even in ExecForeignScan()/ExecReScanForeignScan()
during EvalPlanQual processing.  Since this makes non-reachable the
test-and-elog added to ForeignNext() by commit c3928b467 that produced
the aforesaid error, convert the test-and-elog to an Assert.

Per bug #17355 from Alexander Lakhin.  Back-patch to v14 where both
commits came in.

Patch by me, reviewed and tested by Alexander Lakhin and Amit Langote.

Discussion: https://postgr.es/m/17355-de8e362eb7001a96@postgresql.org