There seems to be some considerable imprecision in the timing of -P
progress reports.  Nominally each thread ought to produce 2 reports
in this test, but about 10% of the time we only get one, and 1% of
the time we get three, as per buildfarm results so far.  Pending
further investigation, treat the last case as a "pass".  (I, tgl,
am suspicious that this still might not be lax enough, now that it's
obvious that the behavior is load-dependent; but there's not yet
buildfarm evidence to confirm that suspicion.)

Fabien Coelho

Discussion: https://postgr.es/m/26654.1505232433@sss.pgh.pa.us

The recent addition of a test suite for this module revealed a few
problems.  It uses a crypt() method that is no longer considered secure
and doesn't work anymore on some platforms.  Using a volatile input
function violates internal sanity check assumptions and leads to
failures on the build farm.

So this module is neither a usable security tool nor a good example for
an extension.  No one wanted to argue for keeping or improving it, so
remove it.

Discussion: https://www.postgresql.org/message-id/5645b0d7-cc40-6ab5-c553-292a91091ee7%402ndquadrant.com

Adjust commentary in regc_pg_locale.c to remove mention of the possibility
of not having <wctype.h> functions, since we no longer consider that.

Eliminate duplicate code in wparser_def.c by generalizing the p_iswhat
macro to take a parameter saying what to return for non-ASCII chars
in C locale.  (That's not really a consequence of the
USE_WIDE_UPPER_LOWER-ectomy, but I noticed it while doing that.)

These functions are required by SUS v2, which is our minimum baseline
for Unix platforms, and are present on all interesting Windows versions
as well.  Even our oldest buildfarm members have them.  Thus, we were not
testing the "!USE_WIDE_UPPER_LOWER" code paths, which explains why the bug
fixed in commit e6023ee7 escaped detection.  Per discussion, there seems
to be no more real-world value in maintaining this option.  Hence, remove
the configure-time tests for wcstombs() and towlower(), remove the
USE_WIDE_UPPER_LOWER symbol, and remove all the !USE_WIDE_UPPER_LOWER code.
There's not actually all that much of the latter, but simplifying the #if
nests is a win in itself.

Discussion: https://postgr.es/m/20170921052928.GA188913@rfd.leadboat.com

The placement of the ifdef blocks in formatting.c was pretty bogus, so
the code failed to compile if USE_WIDE_UPPER_LOWER was not defined.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reported-by: Noah Misch <noah@leadboat.com>

Reported-by: Jeremy Schneider
Author: Michael Paquier
Discussion: https://postgr.es/m/CA+fnDAZaPCwfY8Lp-pfLnUGFAXRu1VfLyRgdup-L-kwcBj8MqQ@mail.gmail.com

This patch absorbs a few unreleased fixes in the IANA code.
It corresponds to commit 2d8b944c1cec0808ac4f7a9ee1a463c28f9cd00a
in https://github.com/eggert/tz.  Non-cosmetic changes include:

TZDEFRULESTRING is updated to match current US DST practice,
rather than what it was over ten years ago.  This only matters
for interpretation of POSIX-style zone names (e.g., "EST5EDT"),
and only if the timezone database doesn't include either an exact
match for the zone name or a "posixrules" entry.  The latter
should not be true in any current Postgres installation, but
this could possibly matter when using --with-system-tzdata.

Get rid of a nonportable use of "++var" on a bool var.
This is part of a larger fix that eliminates some vestigial
support for consecutive leap seconds, and adds checks to
the "zic" compiler that the data files do not specify that.

Remove a couple of ancient compatibility hacks.  The IANA
crew think these are obsolete, and I tend to agree.  But
perhaps our buildfarm will think different.

Back-patch to all supported branches, in line with our policy
that all branches should be using current IANA code.  Before v10,
this includes application of current pgindent rules, to avoid
whitespace problems in future back-patches.

Discussion: https://postgr.es/m/E1dsWhf-0000pT-F9@gemulon.postgresql.org

This reverts commit 0ec2e908.
We'll use the upstream (IANA) fix instead.

"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.

Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.

Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre

Previously, the code didn't think about this case and would just try to
analyze such a column twice.  That would fail at the point of inserting
the second version of the pg_statistic row, with obscure error messsages
like "duplicate key value violates unique constraint" or "tuple already
updated by self", depending on context and PG version.  We could allow
the case by ignoring duplicate column specifications, but it seems better
to reject it explicitly.

The bogus error messages seem like arguably a bug, so back-patch to
all supported versions.

Nathan Bossart, per a report from Michael Paquier, and whacked
around a bit by me.

Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com

These variables are only ever written to in assertion-enabled builds,
and the latest Microsoft compilers complain about such variables in
non-assertion-enabled builds.

Apparently they don't worry so much about variables that are written to
but not read from, so most of our PG_USED_FOR_ASSERTS_ONLY variables
don't cause the problem.

Discussion: https://postgr.es/m/7800.1505950322@sss.pgh.pa.us

This is not used for anything yet, but it is necessary infrastructure
for partition-wise join and for partition pruning without constraint
exclusion.

Ashutosh Bapat, reviewed by Amit Langote and with quite a few changes,
mostly cosmetic, by me.  Additional review and testing of this patch
series by Antonin Houska, Amit Khandekar, Rafia Sabih, Rajkumar
Raghuwanshi, Thomas Munro, and Dilip Kumar.

Discussion: http://postgr.es/m/CAFjFpRfneFG3H+F6BaiXemMrKF+FY-POpx3Ocy+RiH3yBmXSNw@mail.gmail.com

pg_newlocale_from_collation() used malloc() and strdup() directly,
which is generally not per backend coding style, and it didn't bother
to check for failure results, but would just SIGSEGV instead.  Also,
if one of the numerous error checks in the middle of the function
failed, the already-allocated memory would be leaked permanently.
Admittedly, it's not a lot of memory, but it could build up if this
function were called repeatedly for a bad collation.

The first two problems are easily cured by palloc'ing in TopMemoryContext
instead of calling libc directly.  We can fairly easily dodge the leakage
problem for the struct pg_locale_struct by filling in a temporary variable
and allocating permanent storage only once we reach the bottom of the
function.  It's harder to get rid of the potential leakage for ICU's copy
of the collcollate string, but at least that's only allocated after most
of the error checks; so live with that aspect.

Back-patch to v10 where this code came in, with one or another of the
ICU patches.

005_encoding.pl neglected to wait for the subscriber's initial
synchronization to happen.  While we have not seen this fail in
the buildfarm, it's pretty easy to demonstrate there's an issue
by hacking logicalrep_worker_launch() to fail most of the time.

Michael Paquier

Discussion: https://postgr.es/m/27032.1505749806@sss.pgh.pa.us

GRANT, REVOKE, and some allied commands allow the noise word GROUP
before a role name (cf. grantee production in gram.y).  This option
does not exist elsewhere, but it had nonetheless snuck into the
documentation for ALTER ROLE, ALTER USER, and CREATE SCHEMA.

Seems to be a copy-and-pasteo in commit 31eae602, which did expand the
syntax choices here, but not in that way.  Back-patch to 9.5 where that
came in.

Discussion: https://postgr.es/m/20170916123750.8885.66941@wrigleys.postgresql.org

Commit 0a480502 broke it.

Report by Andreas Seltenreich.  Fix by Ashutosh Bapat.

Discussion: http://postgr.es/m/874ls2vrnx.fsf@ansel.ydns.eu

Thomas Munro

Discussion: http://postgr.es/m/CAEepm=2j-HAgnBUrAazwS0ry7Z_ihk+d7g+Ye3u99+6WbiGt_Q@mail.gmail.com

This step was erroneously removed four days ago by me.

Reported-by: Magnus via IM

Backpatch-through: 9.5

from gcc-7 -Wformat-truncation (via -Wall)

Remove gratuitous differences in the process names shown in
pg_stat_activity.backend_type and the ps output.
Reviewed-by: Takayuki Tsunakawa <tsunakawa.takay@jp.fujitsu.com>

Since rsync 3.0.0 (released in 2008), the default way to enumerate
changes was changed in a way that makes it less likely that the hardlink
sync mode works. Since the whole point of the documented procedure is
for the hardlinks to work, change our docs to suggest using the
backwards compatibility switch.

For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.

But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.

This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured.  For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.

Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
    Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com

As it turns out we can't rely that the script's monitoring session is
terminated with a proper error by the server, because the session
might be terminated while already trying to send data.

Also improve robustness and error reporting facilities of the test,
developed while debugging this issue.

Discussion: https://postgr.es/m/20170920020038.kllxgilo7xzwmtto@alap3.anarazel.de

The preceding patch allowed us to remove useless GiST support functions.
This patch actually does that for all the no-op cases in the core GiST
code.  This buys us whatever performance gain is to be had, and more
importantly exercises the preceding patch.

There remain no-op functions in the contrib GiST opclasses, but those
will take more work to remove.

Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com

There are common use-cases in which the compress and/or decompress
functions can be omitted, with the result being that we make no
data transformation when storing or retrieving index values.
Previously, you had to provide a no-op function anyway, but this
patch allows such opclass support functions to be omitted.

Furthermore, if the compress function is omitted, then the core code
knows that the stored representation is the same as the original data.
This means we can allow index-only scans without requiring a fetch
function to be provided either.  Previously you had to provide a
no-op fetch function if you wanted IOS to work.

This reportedly provides a small performance benefit in such cases,
but IMO the real reason for doing it is just to reduce the amount of
useless boilerplate code that has to be written for GiST opclasses.

Andrey Borodin, reviewed by Dmitriy Sarafannikov

Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com

Reported-By: Robert Haas
Discussion: https://postgr.es/m/CA+Tgmoa+YBvWgFST2NVoeXjVSohEpK=vqnVCsoCkhTVVxfLcVQ@mail.gmail.com

The plan is to convert the current pg_upgrade test to the TAP
framework.  This commit just puts a basic TAP test in place so that we
can see how the build farm behaves, since the build farm client has some
special knowledge of the pg_upgrade tests.

Author: Michael Paquier <michael.paquier@gmail.com>

The use of strnlen rather than strlen was just paranoia. Instead of
giving up on the paranoia, just implement the safeguard
differently. And add a comment explaining why we're careful.

Author: Andres Freund
Discussion: https://postgr.es/m/E1duOkJ-0001Mc-U5@gemulon.postgresql.org

Previously multi-byte aware truncation was done on every
pgstat_report_activity() call - proving to be a bottleneck for
workloads with long query strings that execute quickly.

Instead move the truncation to the read side, which commonly is
executed far less frequently. That's possible because all server
encodings allow to determine the length of a multi-byte string from
the first byte.

Rename PgBackendStatus.st_activity to st_activity_raw so existing
extension users of the field break - their code has to be adjusted to
use pgstat_clip_activity().

Author: Andres Freund
Tested-By: Khuntal Ghosh
Reviewed-By: Robert Haas, Tom Lane
Discussion: https://postgr.es/m/20170912071948.pa7igbpkkkviecpz@alap3.anarazel.de

This reverts commit 890faaf1 which attempted unsuccessfully to deal with
the problem, and instead just comments out these tests like other similar
tests elsewhere in the script.

Testing indicates this can save a third to a half of the runtime
of the function.

Pavel Stehule, reviewed by Alexander Kuzmenkov

Discussion: https://postgr.es/m/CAFj8pRAT62pRgjoHbgTfJUc2uLmeQ4saUj+yVJAEZUiMwNCmdg@mail.gmail.com

Problem introduced with non-ascii characters in commit f2464997
and discovered on various buildfarm animals.

Add timeouts in case psql doesn't deliver the expected output, and try
to cause the monitoring psql to be fully connected to a backend.  This
isn't necessarily everything needed, but at least the timeouts should
reduce the pain for buildfarm owners.

Author: Andres Freund
Reported-By: Tom Lane, BF animals prairiedog and calliphoridae
Discussion: https://postgr.es/m/E1du6ZT-00043I-91@gemulon.postgresql.org

Reported-by: Zhou Digoal

Discussion: https://postgr.es/m/20170912133722.25637.91@wrigleys.postgresql.org

Backpatch-through: 10

This is similar to text_pattern_ops.

Alexey Chernyshov, reviewed by Jacob Champion.

Previously statement_timeout, in the extended protocol, affected all
messages till a Sync message.  For clients that pipeline/batch query
execution that's problematic.

Instead disable timeout after each Execute message, and enable, if
necessary, the timer in start_xact_command(). As that's done only for
Execute and not Parse / Bind, pipelining the latter two could still
cause undesirable timeouts. But a survey of protocol implementations
shows that all drivers issue Sync messages when preparing, and adding
timeout rearming to both is fairly expensive for the common parse /
bind / execute sequence.

Author: Tatsuo Ishii, editorialized by Andres Freund
Reviewed-By: Takayuki Tsunakawa, Andres Freund
Discussion: https://postgr.es/m/20170222.115044.1665674502985097185.t-ishii@sraoss.co.jp

A bugfix for commit 8c0d7baf.  The code
would have crashed if hashtable->size_log2 ever had the same value as
hashtable->control->size_log2 by coincidence.

Per Valgrind.

Author: Thomas Munro
Reported-By: Tomas Vondra
Discussion: https://postgr.es/m/e72fb33c-4f31-f276-e972-263d9b59554d%402ndquadrant.com

Given that I managed to break this...  We probably should extend the
tests to also cover other sub-processes dying, but that's something
for later.

Author: Andres Freund
Discussion: https://postgr.es/m/20170917080752.rcmihzfmgbeuqjk2@alap3.anarazel.de

The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.

It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.

A followup commit will introduce regression test coverage for crash
restarts.

Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us

Make the btree page-flags test macros (P_ISLEAF and friends) return clean
boolean values, rather than values that might not fit in a bool.  Use them
in a few places that were randomly referencing the flag bits directly.

In passing, change access/nbtree/'s only direct use of BUFFER_LOCK_SHARE to
BT_READ.  (Some think we should go the other way, but as long as we have
BT_READ/BT_WRITE, let's use them consistently.)

Masahiko Sawada, reviewed by Doug Doole

Discussion: https://postgr.es/m/CAD21AoBmWPeN=WBB5Jvyz_Nt3rmW1ebUyAnk3ZbJP3RMXALJog@mail.gmail.com