Oversight in commit d168b666, which added bottom-up index deletion.

Empty sibling pages can occasionally be much more common than any other
event that we report on at elevel DEBUG1.  Increase the elevel for
relevant cases to DEBUG2 to avoid overwhelming the user with relatively
insignificant details.

After reading the root cert list from the ssl_ca_file, immediately
install it as client CA list of the new SSL context.  That gives the
SSL context ownership of the list, so that SSL_CTX_free will free it.
This avoids a permanent memory leak if we fail further down in
be_tls_init(), which could happen if bogus CRL data is offered.

The leak could only amount to something if the CRL parameters get
broken after server start (else we'd just quit) and then the server
is SIGHUP'd many times without fixing the CRL data.  That's rather
unlikely perhaps, but it seems worth fixing, if only because the
code is clearer this way.

While we're here, add some comments about the memory management
aspects of this logic.

Noted by Jelte Fennema and independently by Andres Freund.
Back-patch to v10; before commit de41869b it doesn't matter,
since we'd not re-execute this code during SIGHUP.

Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org

Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.

Mark Dilger

Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com

When we have posix_fadvise() available, we can improve the performance
of an ANALYZE by quite a bit by using it to inform the kernel of the
blocks that we're going to be asking for.  Similar to bitmap index
scans, the number of buffers pre-fetched is based off of the
maintenance_io_concurrency setting (for the particular tablespace or,
if not set, globally, via get_tablespace_maintenance_io_concurrency()).

Reviewed-By: Heikki Linnakangas, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/VI1PR0701MB69603A433348EDCF783C6ECBF6EF0%40VI1PR0701MB6960.eurprd07.prod.outlook.com

When logging auto-vacuum and auto-analyze activity, include the I/O
timing if track_io_timing is enabled.  Also, for auto-analyze, add the
read rate and the dirty rate, similar to how that information has
historically been logged for auto-vacuum.

Stephen Frost and Jakub Wartak

Reviewed-By: Heikki Linnakangas, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/VI1PR0701MB69603A433348EDCF783C6ECBF6EF0%40VI1PR0701MB6960.eurprd07.prod.outlook.com

Since commit ba79cb5d, values of bind parameters have been logged
during errors in extended query mode.  However, we only did that after
we'd collected and converted all the parameter values, thus failing to
offer any useful localization of invalid-parameter problems.  Add a
separate callback that's used during parameter collection, and have it
print the parameter number, along with the input string if text input
format is used.

Justin Pryzby and Tom Lane

Discussion: https://postgr.es/m/20210104170939.GH9712@telsasoft.com
Discussion: https://postgr.es/m/CANfkH5k-6nNt-4cSv1vPB80nq2BZCzhFVR5O4VznYbsX0wZmow@mail.gmail.com

I forgot that Windows represents newlines as \r\n, so splitting a string
at /\s/ creates additional empty strings.  Let's rewrite that as /\s+/
to see if that avoids those.  (There's precedent for using that pattern
on Windows in other scripts.)

Previously: 91bdf499, 8ed428dc, 650b9670.

Per buildfarm, via Tom Lane.
Discussion: https://postgr.es/m/3144460.1615860259@sss.pgh.pa.us

This tests some basic features for progress reporting of COPY, relying
on an INSERT trigger that gets fired when doing COPY FROM with a file or
stdin, checking for sizes, number of tuples processed, and number of
tuples excluded by a WHERE clause.

Author: Josef Šimánek, Matthias van de Meent
Reviewed-by: Michael Paquier, Justin Pryzby, Bharath Rupireddy, Tomas
Vondra
Discussion: https://postgr.es/m/CAEze2WiOcgdH4aQA8NtZq-4dgvnJzp8PohdeKchPkhMY-jWZXA@mail.gmail.com

New metacommands \startpipeline and \endpipeline allow the user to run
queries in libpq pipeline mode.

Author: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/b4e34135-2bd9-4b8a-94ca-27d760da26d7@manitou-mail.org

Pipeline mode in libpq lets an application avoid the Sync messages in
the FE/BE protocol that are implicit in the old libpq API after each
query.  The application can then insert Sync at its leisure with a new
libpq function PQpipelineSync.  This can lead to substantial reductions
in query latency.
Co-authored-by: Craig Ringer <craig.ringer@enterprisedb.com>
Co-authored-by: Matthieu Garrigues <matthieu.garrigues@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aya Iwata <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Nikhil Sontakke <nikhils@2ndquadrant.com>
Reviewed-by: Vaishnavi Prabakaran <VaishnaviP@fast.au.fujitsu.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>

Discussion: https://postgr.es/m/CAMsr+YFUjJytRyV4J-16bEoiZyH=4nj+sQ7JP9ajwz=B4dMMZw@mail.gmail.com
Discussion: https://postgr.es/m/CAJkzx4T5E-2cQe3dtv2R78dYFvz+in8PY7A8MArvLhs_pg75gg@mail.gmail.com

It's hard to avoid the conclusion that there is something wrong with
setjmp/longjmp on MinGW-64, as we have seen failures come and go after
entirely-unrelated-looking changes in our own code.  Other projects
such as Ruby have given up and started using gcc's setjmp/longjmp
builtins on that platform; this patch just follows that lead.

Note that this is a pretty fundamental ABI break for functions
containining either setjmp or longjmp, so we can't really consider
a back-patch.

Per reports from Regina Obe and Heath Lord, as well as recent failures
on buildfarm member walleye, and less-recent failures on fairywren.

Juan José Santamaría Flecha

Discussion: https://postgr.es/m/000401d716a0$1ed0fc70$5c72f550$@pcorp.us
Discussion: https://postgr.es/m/CA+BEBhvHhM-Bn628pf-LsjqRh3Ang7qCSBG0Ga+7KwhGqrNUPw@mail.gmail.com
Discussion: https://postgr.es/m/f1caef93-9640-022e-9211-bbe8755a56b0@2ndQuadrant.com

SERIALIZABLE no longer inhibits parallelism, so we can drop some
outdated workarounds and comments from regression tests.  The change
came in release 12, commit bb16aba5, but it's not really worth
back-patching.

Also fix a typo.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJUaHeK%3DHLATxF1JOKDjKJVrBKA-zmbPAebOM0Se2FQRg%40mail.gmail.com

This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.

This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.

Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.

Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp

Consistently set a flag variable that tracks whether the current heap
page has a dead item during lazy vacuum's heap scan.  We missed the
common case where there is an preexisting (or even a new) LP_DEAD heap
line pointer.

Also make it clear that the variable might be affected by an existing
line pointer, say from an earlier opportunistic pruning operation.  This
distinction is important because it's the main reason why we can't just
use the nearby tups_vacuumed variable instead.

No backpatch.  In theory failing to set the page level flag variable had
no consequences.  Currently it is only used to defensively check if a
page marked all visible has dead items, which should never happen anyway
(if it does then the table must be corrupt).

Author: Masahiko Sawada <sawada.mshk@gmail.com>
Diagnosed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAtZb4+HJT_8RoOXvu4HM-Zd4HKS3YSMCH6+-W=bDyh-w@mail.gmail.com

It's not immediately obvious what you have to do to get "make
installcheck" to work here, so document that along the same lines
as we've used elsewhere.

It does not work on all versions of perl across all platforms.

To avoid endian-ness issues, pick a new value for column a
that has the same upper 4 bytes as lower 4 bytes. Try to
make it something that isn't likely to occur anywhere nearby
in the page.

Discussion: http://postgr.es/m/29DA079B-0658-4E66-BDAA-0EFD7B64D9C6@enterprisedb.com

Fix another example of non-portable option ordering in the tests.
Oversight in 24189277.

Mark Dilger

Discussion: https://postgr.es/m/C37D28BA-3BA3-4776-B812-17F05F3472D8@enterprisedb.com

Don't try to compile src/port/pthread_barrier_wait.c if we opted out of
threads at configure time.  Revealed by build farm member gaur, which
can't compile this code because of problems with its pthread
implementation.  It shouldn't be trying to, because it's using
--disable-thread-safety.

Defect in commit 44bf3d50.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2568537.1615603606%40sss.pgh.pa.us

Commit 05c8482f added special logic related to parallel-safety of FK
triggers. This is a bit of a hack and should have instead been done by
simply setting appropriate proparallel values on those trigger functions
themselves.

Suggested-by: Tom Lane
Author: Greg Nancarrow
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2309260.1615485644@sss.pgh.pa.us

Commit 24189277 managed to remove
one of the two places where we were checking for a "no such user"
error while leaving the other one right next to it. So remove that
too. In fact, remove the entire test, because the whole point of
this test was to see which message we got on a failure.

Avoid use of non-portable option ordering in command_checks_all().
The use of bare command line arguments before switches doesn't work
everywhere.  Per buildfarm members drongo and hoverfly.

Avoid testing for the message "role \"%s\" does not exist", because
some buildfarm machines report a different error. fairywren complains
about "SSPI authentication failed for user \"%s\"", for example.

Mark Dilger

Discussion: http://postgr.es/m/9E76E46A-48B2-4869-BD0C-422204C1F767@enterprisedb.com
Discussion: http://postgr.es/m/F0A1FD70-A2F4-4528-8A03-8650CAEC0554%40enterprisedb.com

It's hard to believe, but buildfarm results from the new pg_amcheck
suggest that command_checks_all() perform shell expansion on some
machines but not others, apparently due to an underlying behavior
difference in IPC::Run. Let's see if we can work around that - and
confirm that it is the real problem - by passing '-S*' as a single
argument rather than '-S' and '*' as two separate ones.

Failures were observed on jacana and hoverfly.

Mark Dilger

Discussion: http://postgr.es/m/9E76E46A-48B2-4869-BD0C-422204C1F767@enterprisedb.com

Test #12 overwrote a 1-byte varlena header to make it look like the
initial byte of a 4-byte varlena header, but the results were
endian-dependent. Also, the byte "abc" that followed the overwritten
byte would be interpreted differently depending on endian-ness.
Overwrite 4 bytes instead, in an endian-aware manner.

Test #13 accidentally managed to depend on TOAST_MAX_CHUNK_SIZE,
which varies slightly depending on MAXIMUM_ALIGNOF. That's not
the point anyway, so make the regexp insensitive to the expected
number of chunks.

Mark Dilger

Discussion: http://postgr.es/m/A80D68F6-E38F-482D-9522-E2FB6AAFE8A1@enterprisedb.com

Simplify _bt_vacuum_needs_cleanup() functions's signature (it only needs
a single 'rel' argument now), and move it next to its sibling function
in nbtpage.c.

I believe that _bt_vacuum_needs_cleanup() was originally located in
nbtree.c due to an include dependency issue.  That's no longer an issue.

Follow-up to commit 9f3665fb.

Erik Rijkers reported a compile failure, and I think this is probably
the reason.

Per buildfarm member crake.

Per report from Peter Geoghegan.

Discussion: http://postgr.es/m/CAH2-WznpwULZ3uJ1_6WXvNMXYbOy8k8tYs3r=qSdGmZeRd6tDw@mail.gmail.com

This makes it a lot easier to run the corruption checks that are
implemented by contrib/amcheck against lots of relations and get
the result in an easily understandable format. It has a wide variety
of options for choosing which relations to check and which checks
to perform, and it can run checks in parallel if you want.

Mark Dilger, reviewed by Peter Geoghegan and by me.

Discussion: http://postgr.es/m/12ED3DA8-25F0-4B68-937D-D907CFBF08E7@enterprisedb.com
Discussion: http://postgr.es/m/BA592F2D-F928-46FF-9516-2B827F067F57@enterprisedb.com

psql's editing commands decide whether the user has edited the file
by checking for change of modification timestamp.  This is probably
fine for a pre-existing file, but with a temporary file that is
created within the command, it's possible for a fast typist to
save-and-exit in less than the one-second granularity of stat(2)
timestamps.  On Windows FAT filesystems the granularity is even
worse, 2 seconds, making the race a bit easier to hit.

To fix, try to set the temp file's mod time to be two seconds ago.
It's unlikely this would fail, but then again the race condition
itself is unlikely, so just ignore any error.

Also, we might as well check the file size as well as its mod time.

While this is a difficult bug to hit, it still seems worth
back-patching, to ensure that users' edits aren't lost.

Laurenz Albe, per gripe from Jacob Champion; based on fix suggestions
from Jacob and myself

Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at

GENERATED ALWAYS AS IDENTITY implies NOT NULL, but the code failed
to complain if you overrode that with "GENERATED ALWAYS AS IDENTITY
NULL".  One might think the old behavior was a feature, but it was
inconsistent because the outcome varied depending on the order of
the clauses, so it seems to have been just an oversight.

Per bug #16913 from Pavel Boev.  Back-patch to v10 where identity
columns were introduced.

Vik Fearing (minor tweaks by me)

Discussion: https://postgr.es/m/16913-3b5198410f67d8c6@postgresql.org

When sorting a potentially large number of dirty buffers, the
checkpointer can benefit from a faster sort routine.  One reported
improvement on a large buffer pool system was 1.4s -> 0.6s.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ2-eaDqAum5bxhpMNhvuJmRDZxB_Tow0n-gse%2BHG0Yig%40mail.gmail.com

Reported-by: Thomas Munro
Author: Takayuki Tsunakawa
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CA+hUKG+oPoFizjABt=GXZWTEHx3oev5rAe2scjW2r6F1rguo5w@mail.gmail.com

The commit added code which used a relcache TriggerDesc field across
another cache access, which it shouldn't because the relcache doesn't
guarantee it won't get moved.

Diagnosed-by: Tom Lane
Author: Greg Nancarrow
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/2309260.1615485644@sss.pgh.pa.us

Since commits 9f095299 and f98b8476 we don't poll the postmaster
pipe at all during crash recovery on Linux and FreeBSD, but on other
operating systems we were still doing it for every WAL record.  Do it
less frequently on operating systems where system calls are required, at
the cost of delaying exit a bit after postmaster death.  This avoids
expensive system calls reported to slow down CPU-bound recovery by as
much as 10-30%.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com
Discussion: https://postgr.es/m/7261eb39-0369-f2f4-1bb5-62f3b6083b5e@iki.fi

Use this new CV to wait for walreceiver shutdown without a sleep/poll
loop, while also benefiting from standard postmaster death handling.

Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com

Replace a sleep loop with a CV, to get a fast reaction time when
recovery is resumed or the postmaster exits via standard infrastructure.
Unfortunately we still need to wake up every second to perform extra
polling during the recovery pause loop.

Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com

When shutdown is requested, checkpointer performs checkpoint or
restartpoint, and updates the statistics, before it exits. But previously
checkpointer didn't send those statistics to the stats collector.

Shutdown checkpoint and restartpoint are treated as requested ones
instead of scheduled ones, so the number of them are counted in
pg_stat_bgwriter.checkpoints_req column.

Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com

In walwriter's main loop, WAL stats message is only sent if enough time
has passed since last one was sent to reach PGSTAT_STAT_INTERVAL msecs.
This is necessary to avoid overloading to the stats collector. But this
can cause recent WAL stats to be unsent when walwriter exits.

To ensure that all the WAL stats are sent, this commit makes walwriter
force to send remaining WAL stats to the collector when it exits because
of shutdown request. Note that those remaining WAL stats can still be
unsent when walwriter exits with non-zero exit code (e.g., FATAL error).
This is OK because that walwriter exit leads to server crash and
subsequent recovery discards all the stats. So there is no need to send
remaining stats in that case.

Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com

Itanium is very uncommon and being discontinued.  ARM is everywhere.
Prefer ARM as an example of an architecture with weak memory ordering.