In yesterday's commit 2dc4f011, I tried
to force buffering of stdout/stderr in initdb to be what it is by
default when the program is run interactively on Unix (since that's how
most manual testing is done).  This tripped over the fact that Windows
doesn't support _IOLBF mode.  We dealt with that a long time ago in
syslogger.c by falling back to unbuffered mode on Windows.  Export that
solution in port.h and use it in initdb.

Back-patch to 8.4, like the previous commit.

Don't close stdout on SIGHUP. Also, when a SIGHUP is received, close the
file immediately, rather than only after receiving some more data from
the server. Rename a variable, to avoid mentally dealing with double
negatives (not unsynced means synced).

The proc array can contain duplicate XIDs, when a transaction is just being
prepared for two-phase commit. To cope, remove any duplicates in
txid_current_snapshot(). Also ignore duplicates in the input functions, so
that if e.g. you have an old pg_dump file that already contains duplicates,
it will be accepted.

Report and fix by Jan Wieck. Backpatch to all supported versions.

To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.

To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.

Backpatch to all supported versions.

Euler Taveira

Mingw-w64 headers map popen/pclose to _popen and _pclose, but we want to use
our popen wrapper rather than the Mingw-w64. #undef the Mingw's version.

Since this program may print to either stdout or stderr, the relative
ordering of its messages depends on the buffering behavior of those files.
Force stdout to be line-buffered and stderr to be unbuffered, ensuring
that the behavior will match standard Unix interactive behavior, even
when stdout and stderr are rerouted to a file.

Per complaint from Tomas Vondra.  The particular case he pointed out is
new in HEAD, but issues of the same sort could arise in any branch with
other error messages, so back-patch to all branches.

I'm unsure whether we might not want to do this in other client programs
as well.  For the moment, just fix initdb.

Per buildfarm.

The data type internal format changed in 9.4.  Also mention this in the
9.4 release notes.

rd_replidindex should be managed the same as rd_oidindex, and rd_keyattr
and rd_idattr should be managed like rd_indexattr.  Omissions in this area
meant that the bitmapsets computed for rd_keyattr and rd_idattr would be
leaked during any relcache flush, resulting in a slow but permanent leak in
CacheMemoryContext.  There was also a tiny probability of relcache entry
corruption if we ran out of memory at just the wrong point in
RelationGetIndexAttrBitmap.  Otherwise, the fields were not zeroed where
expected, which would not bother the code any AFAICS but could greatly
confuse anyone examining the relcache entry while debugging.

Also, create an API function RelationGetReplicaIndex rather than letting
non-relcache code be intimate with the mechanisms underlying caching of
that value (we won't even mention the memory leak there).

Also, fix a relcache flush hazard identified by Andres Freund:
RelationGetIndexAttrBitmap must not assume that rd_replidindex stays valid
across index_open.

The aspects of this involving rd_keyattr date back to 9.3, so back-patch
those changes.

Report by Dean Rasheed

Patch by Sergey Muraviov

Historically we've printed a complaint for a bad locale setting, but then
fallen back to the environment default.  Per discussion, this is not such
a great idea, because rectifying an erroneous locale choice post-initdb
(perhaps long after data has been loaded) could be enormously expensive.
Better to complain and give the user a chance to double-check things.

The behavior was particularly bad if the bad setting came from environment
variables rather than a bogus command-line switch: in that case not only
was there a fallback to C/SQL_ASCII, but the printed complaint was quite
unhelpful.  It's hard to be entirely sure what variables setlocale looked
at, but we can at least give a hint where the problem might be.

Per a complaint from Tomas Vondra.

Report by Heikki Linnakangas

Report by Dean Rasheed

Patch by Andres Freund, slight adjustments by me

When cache invalidations arrive while ri_LoadConstraintInfo() is busy
filling a new cache entry, InvalidateConstraintCacheCallBack() compares
the - not yet initialized - oidHashValue field with the to-be-invalidated
hash value. To fix, check whether the entry is already marked as invalid.

Andres Freund

The code expands a varbit gist leaf key to a node key by copying the bit
data twice in a varlen datum, as both the lower and upper key. The lower key
was expanded to INTALIGN size, but the padding bytes were not initialized.
That's a problem because when the lower/upper keys are compared, the padding
bytes are used compared too, when the values are otherwise equal. That could
lead to incorrect query results.

REINDEX is advised for any btree_gist indexes on bit or bit varying data
type, to fix any garbage padding bytes on disk.

Per Valgrind, reported by Andres Freund. Backpatch to all supported
versions.

Andres Freund

Where appropriate

Report by Nicolas Barbier, Tatsuo Ishii, MauMau

America/Metlakatla hasn't been in the IANA database all that long, so
some installations might not have it.  It does seem worthwhile to test
with a fractional-minute GMT offset, but we can get that from almost
any pre-1900 date; I chose Europe/Paris, whose LMT offset from Greenwich
should be pretty darn well established.

Also, assuming that Mars/Mons_Olympus will never be in the IANA database
seems less than future-proof, so let's use a more fanciful location for
the bad-zone-name check.

Per complaint from Christoph Berg.

config.pl and buildenv.pl can be used to customize build settings when
using MSVC.  They should never get committed into the common source tree.

Back-patch to 9.0; it looks like the rules were different in 8.4.

Michael Paquier

Amit Langote

The leak is fairly small and rare, but a leak nevertheless.

Per Coverity report. Backpatch to 9.2, where pg_receivexlog was added.
pg_basebackup shares the code, but it always exits on error, so there is
no real leak.

The original coding for ALTER SYSTEM made a fundamentally bogus assumption
that postgresql.auto.conf could be sought relative to the main config file
if we hadn't yet determined the value of data_directory.  This fails for
common arrangements with the config file elsewhere, as reported by
Christoph Berg.

The simplest fix is to not try to read postgresql.auto.conf until after
SelectConfigFiles has chosen (and locked down) the data_directory setting.

Because of the logic in ProcessConfigFile for handling resetting of GUCs
that've been removed from the config file, we cannot easily read the main
and auto config files separately; so this patch adopts a brute force
approach of reading the main config file twice during postmaster startup.
That's a tad ugly, but the actual time cost is likely to be negligible,
and there's no time for a more invasive redesign before beta.

With this patch, any attempt to set data_directory via ALTER SYSTEM
will be silently ignored.  It would probably be better to throw an
error, but that can be dealt with later.  This bug, however, would
prevent any testing of ALTER SYSTEM by a significant fraction of the
userbase, so it seems important to get it fixed before beta.

There's no longer much pressure to switch the default GIN opclass for
jsonb, but there was still some unhappiness with the name "jsonb_hash_ops",
since hashing is no longer a distinguishing property of that opclass,
and anyway it seems like a relatively minor detail.  At the suggestion of
Heikki Linnakangas, we'll use "jsonb_path_ops" instead; that captures the
important characteristic that each index entry depends on the entire path
from the document root to the indexed value.

Also add a user-facing explanation of the implementation properties of
these two opclasses.

Per discussion, this seems like a more consistent choice of name.

Fabrízio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me

Document existence operator adequately; fix obsolete claim that no
Unicode-escape semantic checks happen on input (it's still true for
json, but not for jsonb); improve examples; assorted wordsmithing.

When returning rows from a bitmap, as done with partial match queries, we
would get stuck in an infinite loop if the bitmap contained a lossy page
reference.

This bug is new in master, it was introduced by the patch to allow skipping
items refuted by other entries in GIN scans.

Report and fix by Alexander Korotkov

Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.

No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.

Christoph Berg

It takes two arguments, not one.