The function had been interpreting SQL_ASCII messages as UTF8, throwing
an error when they were invalid UTF8.  The new behavior is consistent
with pg_do_encoding_conversion().  This affects LOG_DESTINATION_STDERR
and LOG_DESTINATION_EVENTLOG, which will send untranslated bytes to
write() and ReportEventA().  On buildfarm member bowerbird, enabling
log_connections caused an error whenever the role name was not valid
UTF8.  Back-patch to 9.4 (all supported versions).

Discussion: https://postgr.es/m/20190512015615.GD1124997@rfd.leadboat.com

We long ago decided to design the shared PgBackendStatus data structure to
minimize the cost of writing status updates, which means that writers just
have to increment the st_changecount field twice.  That isn't hooked into
any sort of resource management mechanism, which means that if something
were to throw error between the two increments, the st_changecount field
would be left odd indefinitely.  That would cause readers to lock up.
Now, since it's also a bad idea to leave the field odd for longer than
absolutely necessary (because readers will spin while we have it set),
the expectation was that we'd treat these segments like spinlock critical
sections, with only short, more or less straight-line, code in them.

That was fine as originally designed, but commit 9029f4b3 broke it
by inserting a significant amount of non-straight-line code into
pgstat_bestart(), code that is very capable of throwing errors, not to
mention taking a significant amount of time during which readers will spin.
We have a report from Neeraj Kumar of readers actually locking up, which
I suspect was due to an encoding conversion error in X509_NAME_to_cstring,
though conceivably it was just a garden-variety OOM failure.

Subsequent commits have loaded even more dubious code into pgstat_bestart's
critical section (and commit fc70a4b0 deserves some kind of booby prize
for managing to miss the critical section entirely, although the negative
consequences seem minimal given that the PgBackendStatus entry should be
seen by readers as inactive at that point).

The right way to fix this mess seems to be to compute all these values
into a local copy of the process' PgBackendStatus struct, and then just
copy the data back within the critical section proper.  This plan can't
be implemented completely cleanly because of the struct's heavy reliance
on out-of-line strings, which we must initialize separately within the
critical section.  But still, the critical section is far smaller and
safer than it was before.

In hopes of forestalling future errors of the same ilk, rename the
macros for st_changecount management to make it more apparent that
the writer-side macros create a critical section.  And to prevent
the worst consequences if we nonetheless manage to mess it up anyway,
adjust those macros so that they really are a critical section, ie
they now bump CritSectionCount.  That doesn't add much overhead, and
it guarantees that if we do somehow throw an error while the counter
is odd, it will lead to PANIC and a database restart to reset shared
memory.

Back-patch to 9.5 where the problem was introduced.

In HEAD, also fix an oversight in commit b0b39f72: it failed to teach
pgstat_read_current_status to copy st_gssstatus data from shared memory to
local memory.  Hence, subsequent use of that data within the transaction
would potentially see changing data that it shouldn't see.

Discussion: https://postgr.es/m/CAPR3Wj5Z17=+eeyrn_ZDG3NQGYgMEOY6JV6Y-WRRhGgwc16U3Q@mail.gmail.com

I already added that to the incompatibility section as a separate item.

Reported-by: Peter Geoghegan

Reported-by: Tom Lane

Discussion: https://postgr.es/m/28209.1556556696@sss.pgh.pa.us

This is because of the new tid in the index entry.

Reported-by: Peter Geoghegan

Reported-by: Andrew Gierth

Discussion: https://postgr.es/m/87r295hjur.fsf@news-spur.riddles.org.uk

The buildfarm client uses TEMP_CONFIG to implement its extra_config
setting.  Except for stats_temp_directory, extra_config now applies to
TAP suites; extra_config values seen in the past month are compatible
with this.  Back-patch to 9.6, where PostgresNode was introduced, so the
buildfarm can rely on it sooner.

Reviewed by Andrew Dunstan and Tom Lane.

Discussion: https://postgr.es/m/20181229021950.GA3302966@rfd.leadboat.com

When failing to reindex a table or an index, reindexdb would generate an
extra error message related to a database failure, which is misleading.

Backpatch all the way down, as this has been introduced by 85e9a5a0.

Discussion: https://postgr.es/m/CAOBaU_Yo61RwNO3cW6WVYWwH7EYMPuexhKqufb2nFGOdunbcHw@mail.gmail.com
Author: Julien Rouhaud
Reviewed-by: Daniel Gustafsson, Álvaro Herrera, Tom Lane, Michael
Paquier
Backpatch-through: 9.4

My fault; the error was introduced in the Ryu patch.

Reported-by: Peter Geoghegan

Discussion: https://postgr.es/m/CAH2-WzkrX-aA7d3OYtQT+8Mspq+tU5vwuVz=FTzMH3CdrSyprA@mail.gmail.com

Reported-by: Amit Langote

Discussion: https://postgr.es/m/5936b052-5d92-a2c9-75d2-0245fb2330b5@lab.ntt.co.jp

Reported-by: Alexander Korotkov

Discussion: https://postgr.es/m/CAPpHfdvkM-PkyrK6LQitJUDmC_1kOCEtTuseoVhCT=ew0XJmGg@mail.gmail.com

Reported-by: David Rowley

Discussion: https://postgr.es/m/CAKJS1f-NDmeA_tb0oRFhrgf19xq3A9MeoyMcckY04Ct=_i0c2A@mail.gmail.com

Reported-by: Peter Geoghegan

Discussion: https://postgr.es/m/CAH2-WzkSYOM1GJVGtAbRW-OqymoCD=QWYG6ro+GaoOW-jPRuDQ@mail.gmail.com

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20190510013449.GL3925@telsasoft.com

As none of the approaches for avoiding the deadlock issues seem
promising enough, and all the expected reindex related changes have
been made, apply 60c2951e1bab7e to master as well.

Discussion: https://postgr.es/m/4622.1556982247@sss.pgh.pa.us

There's a very old race condition in our code to see whether a pre-existing
shared memory segment is still in use by a conflicting postmaster: it's
possible for the other postmaster to remove the segment in between our
shmctl() and shmat() calls.  It's a narrow window, and there's no risk
unless both postmasters are using the same port number, but that's possible
during parallelized "make check" tests.  (Note that while the TAP tests
take some pains to choose a randomized port number, pg_regress doesn't.)
If it does happen, we treated that as an unexpected case and errored out.

To fix, allow EINVAL to be treated as segment-not-present, and the same
for EIDRM on Linux.  AFAICS, the considerations here are basically
identical to the checks for acceptable shmctl() failures, so I documented
and coded it that way.

While at it, adjust PGSharedMemoryAttach's API to remove its undocumented
dependency on UsedShmemSegAddr in favor of passing the attach address
explicitly.  This makes it easier to be sure we're using a null shmaddr
when probing for segment conflicts (thus avoiding questions about what
EINVAL means).  I don't think there was a bug there, but it required
fragile assumptions about the state of UsedShmemSegAddr during
PGSharedMemoryIsInUse.

Commit c0985099 may have made this failure more probable by applying
the conflicting-segment tests more often.  Hence, back-patch to all
supported branches, as that was.

Discussion: https://postgr.es/m/22224.1557340366@sss.pgh.pa.us

I will add links to other parts of the docs later.

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20190510001335.GJ3925@telsasoft.com

The description of the lock type for speculative insertions was
incorrect, being copy-pasted from another one.

As discussed, also move the description for all the fields of lock tag
types from the structure listing lock tag types to the set of macros
setting each LOCKTAG.

Author: John Naylor
Discussion: https://postgr.es/m/CACPNZCtA0-ybaC4fFfaDq_8p_TUOLvGxZH9Dm-=TMHZJarBa7Q@mail.gmail.com

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20190510001959.GK3925@telsasoft.com

Reported-by: Thomas Munro

Discussion: https://postgr.es/m/CA+hUKGJpep8uSXoDtVF6iROCRKce-39HEhDPUaYFyMn0U5e9ug@mail.gmail.com

This adds two more items that should have been included in the
beginning.

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20190508203204.GA25482@telsasoft.com

Reported-by: Justin Pryzby

Discussion: https://postgr.es/m/20190508203204.GA25482@telsasoft.com

This improves the user experience when it comes to restrict several
flavors of REINDEX CONCURRENTLY.  First, for INDEX, remove a restriction
on shared relations as we already check after catalog relations.  Then,
for TABLE, add a proper error message when attempting to run the command
on system catalogs.  The code path of CREATE INDEX CONCURRENTLY already
complains about that, but if a REINDEX is issued then then the error
generated is confusing.

While on it, add more tests to check restrictions on catalog indexes and
on toast table/index for catalogs.  Some error messages are improved,
with wording suggestion coming from Tom Lane.

Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/23694.1556806002@sss.pgh.pa.us

create_merge_append_plan failed to honor the CP_EXACT_TLIST flag:
it would generate the expected targetlist but then it felt free to
add resjunk sort targets to it.  This demonstrably leads to assertion
failures in v11 and HEAD, and it's probably just accidental that we
don't see the same in older branches.  I've not looked into whether
there would be any real-world consequences in non-assert builds.
In HEAD, create_append_plan has sprouted the same problem, so fix
that too (although we do not have any test cases that seem able to
reach that bug).  This is an oversight in commit 3fc6e2d7 which
invented the CP_EXACT_TLIST flag, so back-patch to 9.6 where that
came in.

convert_subquery_pathkeys would create pathkeys for subquery output
values if they match any EquivalenceClass known in the outer query
and are available in the subquery's syntactic targetlist.  However,
the second part of that condition is wrong, because such values might
not appear in the subquery relation's reltarget list, which would
mean that they couldn't be accessed above the level of the subquery
scan.  We must check that they appear in the reltarget list, instead.
This can lead to dropping knowledge about the subquery's sort
ordering, but I believe it's okay, because any sort key that the
outer query actually has any interest in would appear in the
reltarget list.

This second issue is of very long standing, but right now there's no
evidence that it causes observable problems before 9.6, so I refrained
from back-patching further than that.  We can revisit that choice if
somebody finds a way to make it cause problems in older branches.
(Developing useful test cases for these issues is really problematic;
fixing convert_subquery_pathkeys removes the only known way to exhibit
the create_merge_append_plan bug, and neither of the test cases added
by this patch causes a problem in all branches, even when considering
the issues separately.)

The second issue explains bug #15795 from Suresh Kumar R ("could not
find pathkey item to sort" with nested DISTINCT queries).  I stumbled
across the first issue while investigating that.

Discussion: https://postgr.es/m/15795-fadb56c8e44ee73c@postgresql.org

Adjustments requested by reviewers.

Reported-by: Amit Kapila, Thomas Munro, Andrew Gierth, Amit Langote, Oleg Bartunov, Michael Paquier, Alvaro Herrera, Tatsuo Ishii

Discussion: https://postgr.es/m/20190506233029.ozwged67i7s4qd6c@momjian.us

In commit d50d172e, which added support for LIMIT/OFFSET pushdown in
postgres_fdw, a new struct was introduced as the extra parameter of
GetForeignUpperPaths() set for UPPERREL_FINAL, but I forgot to update
the documentation to mention that.

Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17uSXQDe31oRb-z1nYyT6vVzkstZkA3_Wbq38U92b9BmQ%40mail.gmail.com

In commit 7012b132, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics.  The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.

Apply this to HEAD only to avoid destabilizing existing plan choices.

Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp

Commit bb16aba5 broke the code that maintains SxactGlobalXmin.  It
could get stuck when a well-timed READ ONLY transaction runs.  If
SxactGlobalXmin stops advancing, transactions on the
FinishedSerializableTransactions queue are never cleaned up, so
resources are effectively leaked.  Revert that hunk of the commit.

Also revert another similar hunk that was probably harmless, but
unnecessary and unjustified, relating to the DOOMED flag in case of
RO_SAFE early release.

Author: Thomas Munro
Reported-by: Tom Lane
Discussion: https://postgr.es/m/16170.1557251214%40sss.pgh.pa.us

So it picks up strings in pg_log_* calls.  This was forgotten when it
was added to all other relevant subdirectories.

The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.

The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed.  That's even sillier.  With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.

With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID.  Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)".  But keep
IsCatalogRelation as a convenience function.

This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid.  The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.

While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.

Also improve the comments in catalog.c.

There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId.  I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId.  But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.

Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us

When running a batch of VACUUM or ANALYZE commands on a given database,
there were cases where it is possible to have vacuumdb not report an
error where it actually should, leading to incorrect status results.

Author: Julien Rouhaud
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_ZuTwz7CtqLYJ1Ouuh272bTQPLN8b1bAPk0bCBm4PDMTQ@mail.gmail.com
Backpatch-through: 9.5

Commit dd299df8, which added suffix truncation to nbtree, simplified
the WAL record format used by page splits.  It became necessary to
explicitly WAL-log the new high key for the left half of a split in all
cases, which relieved the REDO routine from having to reconstruct a new
high key for the left page by copying the first item from the right
page.  Remove a comment that referred to the previous practice.

Some messages related to foreign servers were reporting the server name
without quotes, or not at all; our style is to have all names be quoted,
and the server name already appears quoted in a few other messages, so
just add quotes and make them all consistent.

Remove an extra "s" in other messages (typos introduced by myself in
f56f8f8d).

Previously it's documented that use of replication functions is
restricted to superusers. This is true for the functions which
use replication origin, but not for pg_logicl_emit_message() and
functions which use replication slot. For example, not only
superusers but also users with REPLICATION privilege is allowed
to use the functions for replication slot. This commit fixes
the documentation for the privileges required for those replication
functions.

Back-patch to 9.4 (all supported versions).

Author: Matsumura Ryo
Discussion: https://postgr.es/m/03040DFF97E6E54E88D3BFEE5F5480F74ABA6E16@G01JPEXMBYT04

REINDEX CONCURRENTLY locks tables with ShareUpdateExclusiveLock rather
than the ShareLock used by a plain REINDEX.  However,
RangeVarCallbackForReindexIndex() was not updated for that and still
used the ShareLock only.  This would lead to lock upgrades later,
leading to possible deadlocks.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190430151735.wi52sxjvxsjvaxxt%40alap3.anarazel.de

Commit c0985099, later adjusted by commit 4ab02e81, probed 0.0.0.0
in addition to 127.0.0.1, for the benefit of Windows build farm
animals.  It isn't really useful on Unix systems, and turned out to
be a bit inconvenient to users of some corporate firewall software.
Switch back to probing just 127.0.0.1 on non-Windows systems.

Back-patch to 9.6, like the earlier changes.

Discussion: https://postgr.es/m/CA%2BhUKG%2B21EPwfgs4m%2BtqyRtbVqkOUvP8QQ8sWk9%2Bh55Aub1H3A%40mail.gmail.com