After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).

This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.

Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com

pg_read_file() is the function that's in core, pg_file_read() is in
adminpack. But when using pg_file_read() in adminpack it calls the *C*
level function pg_read_file() in core, which probably threw the original
author off. But the error hint should be about the SQL function.

Reported-By: Sergei Kornilov
Backpatch-through: 11
Discussion: https://postgr.es/m/373021616060475@mail.yandex.ru

Commit c8f78b61 added a new reloption to enable inserts in parallel-mode
but forgot to update at one of the places about the same in docs. In
passing, fix a typo in the same commit.

Reported-by: Justin Pryzby
Author: Justin Pryzby
Reviewed-by: "Hou, Zhijie", Amit Kapila
Discussion: https://postgr.es/m/20210318025228.GE11765@telsasoft.com

Commit 05c8482f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.

A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.

In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.

Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com

When accessing replication slot stats, introduced in 98681675,
pgstat_read_statsfiles() reads the data into newly allocated
memory. Unfortunately the current memory context at that point is the
callers, leading to leaks and use-after-free dangers.

The fix is trivial, explicitly use pgStatLocalContext. There's some
potential for further improvements, but that's outside of the scope of
this bugfix.

No backpatch necessary, feature is only in HEAD.

Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210317230447.c7uc4g3vbs4wi32i@alap3.anarazel.de

Seems to have been a copy-and-paste mistake in 093129c9.
Per report from max1@inbox.ru.

Discussion: https://postgr.es/m/161591740692.24273.4202054598867879464@wrigleys.postgresql.org

While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:

* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash.  I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems.  Hence, backslashes themselves
have to be backslashed too.

* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path.  (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.)  Using
sscanf for the task of finding the first space is overkill anyway.

* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.

* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.

On the generation end, aside from the escaping issue we have:

* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with.  I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).

* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory.  IMO we should ignore anything without an
OID-like name.

The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change.  The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.

Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.

While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't.  To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map.  That's not very
appetizing either.)

The existing test script does run pg_basebackup with the -Ft option,
but it makes no real attempt to verify the sanity of the results.
We wouldn't know if the output is incompatible with standard "tar"
programs, nor if the server fails to start from the restored output.
Notably, this means that xlog.c's read_tablespace_map() is not being
meaningfully tested, since that code is used only in the tar-format
case.  (We do have reasonable coverage of restoring from plain-format
output, though it's over in src/test/recovery not here.)

Hence, attempt to untar the output and start a server from it,
rather just hoping it's OK.

This test assumes that the local "tar" has the "-C directory"
switch.  Although that's not promised by POSIX, my research
suggests that all non-extinct tar implementations have it.
Should the buildfarm's opinion differ, we can complicate the
test a bit to avoid requiring that.

Possibly this should be back-patched, but I'm unsure about
whether it could work on Windows before d66b23b0.

This was a bit disjointed, partly because of a not-well-considered
decision to document SQL commands that don't return result rows as
though they had nothing in common with commands that do.  Rearrange
so that we have one discussion of variable substitution that clearly
applies to all types of SQL commands, and then handle the question
of processing command output separately.  Clarify that EXPLAIN,
CREATE TABLE AS SELECT, and similar commands that incorporate an
optimizable statement will act like optimizable statements for the
purposes of variable substitution.  Do a bunch of minor wordsmithing
in the same area.

David Johnston and Tom Lane, reviewed by Pavel Stehule and David
Steele

Discussion: https://postgr.es/m/CAKFQuwYvMKucM5fnZvHSo-ah4S=_n9gmKeu6EAo=_fTrohunqQ@mail.gmail.com

This reverts commit 378802e3.
This reverts commit 3b8981b6.

Discussion: https://postgr.es/m/CA%2BhUKGJmcqAE3MZeDCLLXa62cWM0AJbKmp2JrJYaJ86bz36LFA%40mail.gmail.com

578b2297, that removed support for WITH OIDS, has changed
CatalogTupleInsert() to not return an Oid, but one comment was still
mentioning that.

Author: Vik Fearing
Discussion: https://postgr.es/m/fef01975-ed10-3601-7b9e-80ecef72d00b@postgresfriends.org

Commit 3048898e dropped -ING from some wait event names that correspond
to barrier phases.  Update the phases' names to match.

While we're here making cosmetic changes, also rename "DONE" to "FREE".
That pairs better with "ALLOCATE", and describes the activity that
actually happens in that phase (as we do for the other phases) rather
than describing a state.  The distinction is clearer after bugfix commit
3b8981b6 split the phase into two.  As for the growth barriers, rename
their "ALLOCATE" phase to "REALLOCATE", which is probably a better
description of what happens then.  Also improve the comments about
the phases a bit.

Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com

With very unlucky timing and parallel_leader_participation off, PHJ
could attempt to access per-batch state just as it was being freed.
There was code intended to prevent that by checking for a cleared
pointer, but it was buggy.

Fix, by introducing an extra barrier phase.  The new phase
PHJ_BUILD_RUNNING means that it's safe to access the per-batch state to
find a batch to help with, and PHJ_BUILD_DONE means that it is too late.
The last to detach will free the array of per-batch state as before, but
now it will also atomically advance the phase at the same time, so that
late attachers can avoid the hazard, without the data race.  This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).

Revealed by a one-off build farm failure, where BarrierAttach() failed a
sanity check assertion, because the memory had been clobbered by
dsa_free().

Back-patch to 11, where the code arrived.
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz

It seems like a useful sanity check to be able to run "installcheck"
against a cluster running with default_transaction_level set to
serializable or repeatable read.  Only one thing currently fails in
those configurations, so let's fix that.

No back-patch for now, because it fails in many other places in some of
the stable branches.  We'd have to go back and fix those too if we
included this configuration in automated testing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGJUaHeK%3DHLATxF1JOKDjKJVrBKA-zmbPAebOM0Se2FQRg%40mail.gmail.com

Commit ce0fdbfe made tablesync slots permanent and allow Drop
Subscription to drop such slots. However, it is possible that before
tablesync worker could get the acknowledgment of slot creation, drop
subscription stops it and that can lead to a dangling slot on the
publisher. Prevent cancel/die interrupts while creating a slot in the
tablesync worker.

Reported-by: Thomas Munro as per buildfarm
Author: Amit Kapila
Reviewed-by: Vignesh C, Takamichi Osumi
Discussion: https://postgr.es/m/CA+hUKGJG9dWpw1cOQ2nzWU8PHjm=PTraB+KgE5648K9nTfwvxg@mail.gmail.com

Commit 46482432 added a new column substream in pg_subscription but
forgot to update the docs.

Reported-by: Peter Smith
Author: Amit Kapila
Reviewed-by: Peter Smith
Discussion: https://postgr.es/m/CAHut+PuPGGASnh2Dy37VYODKULVQo-5oE=Shc6gwtRizDt==cA@mail.gmail.com

Pass CURSOR_OPT_PARALLEL_OK to pg_plan_query() so that parallel plans
are considered when running the underlying SELECT query.  This wasn't
done in commit e9baa5e9, which did this for CREATE MATERIALIZED VIEW,
because it wasn't yet known to be safe.

Since REFRESH always inserts into a freshly created table before later
merging or swapping the data into place with separate operations, we can
enable such plans here too.

Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Hou, Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Luc Vlaming <luc@swarm64.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CALj2ACXg-4hNKJC6nFnepRHYT4t5jJVstYvri%2BtKQHy7ydcr8A%40mail.gmail.com

Oversight in commit d168b666, which added bottom-up index deletion.

Empty sibling pages can occasionally be much more common than any other
event that we report on at elevel DEBUG1.  Increase the elevel for
relevant cases to DEBUG2 to avoid overwhelming the user with relatively
insignificant details.

After reading the root cert list from the ssl_ca_file, immediately
install it as client CA list of the new SSL context.  That gives the
SSL context ownership of the list, so that SSL_CTX_free will free it.
This avoids a permanent memory leak if we fail further down in
be_tls_init(), which could happen if bogus CRL data is offered.

The leak could only amount to something if the CRL parameters get
broken after server start (else we'd just quit) and then the server
is SIGHUP'd many times without fixing the CRL data.  That's rather
unlikely perhaps, but it seems worth fixing, if only because the
code is clearer this way.

While we're here, add some comments about the memory management
aspects of this logic.

Noted by Jelte Fennema and independently by Andres Freund.
Back-patch to v10; before commit de41869b it doesn't matter,
since we'd not re-execute this code during SIGHUP.

Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org

Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.

Mark Dilger

Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com

When we have posix_fadvise() available, we can improve the performance
of an ANALYZE by quite a bit by using it to inform the kernel of the
blocks that we're going to be asking for.  Similar to bitmap index
scans, the number of buffers pre-fetched is based off of the
maintenance_io_concurrency setting (for the particular tablespace or,
if not set, globally, via get_tablespace_maintenance_io_concurrency()).

Reviewed-By: Heikki Linnakangas, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/VI1PR0701MB69603A433348EDCF783C6ECBF6EF0%40VI1PR0701MB6960.eurprd07.prod.outlook.com

When logging auto-vacuum and auto-analyze activity, include the I/O
timing if track_io_timing is enabled.  Also, for auto-analyze, add the
read rate and the dirty rate, similar to how that information has
historically been logged for auto-vacuum.

Stephen Frost and Jakub Wartak

Reviewed-By: Heikki Linnakangas, Tomas Vondra
Discussion: https://www.postgresql.org/message-id/VI1PR0701MB69603A433348EDCF783C6ECBF6EF0%40VI1PR0701MB6960.eurprd07.prod.outlook.com

Since commit ba79cb5d, values of bind parameters have been logged
during errors in extended query mode.  However, we only did that after
we'd collected and converted all the parameter values, thus failing to
offer any useful localization of invalid-parameter problems.  Add a
separate callback that's used during parameter collection, and have it
print the parameter number, along with the input string if text input
format is used.

Justin Pryzby and Tom Lane

Discussion: https://postgr.es/m/20210104170939.GH9712@telsasoft.com
Discussion: https://postgr.es/m/CANfkH5k-6nNt-4cSv1vPB80nq2BZCzhFVR5O4VznYbsX0wZmow@mail.gmail.com

I forgot that Windows represents newlines as \r\n, so splitting a string
at /\s/ creates additional empty strings.  Let's rewrite that as /\s+/
to see if that avoids those.  (There's precedent for using that pattern
on Windows in other scripts.)

Previously: 91bdf499, 8ed428dc, 650b9670.

Per buildfarm, via Tom Lane.
Discussion: https://postgr.es/m/3144460.1615860259@sss.pgh.pa.us

This tests some basic features for progress reporting of COPY, relying
on an INSERT trigger that gets fired when doing COPY FROM with a file or
stdin, checking for sizes, number of tuples processed, and number of
tuples excluded by a WHERE clause.

Author: Josef Šimánek, Matthias van de Meent
Reviewed-by: Michael Paquier, Justin Pryzby, Bharath Rupireddy, Tomas
Vondra
Discussion: https://postgr.es/m/CAEze2WiOcgdH4aQA8NtZq-4dgvnJzp8PohdeKchPkhMY-jWZXA@mail.gmail.com

New metacommands \startpipeline and \endpipeline allow the user to run
queries in libpq pipeline mode.

Author: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/b4e34135-2bd9-4b8a-94ca-27d760da26d7@manitou-mail.org

Pipeline mode in libpq lets an application avoid the Sync messages in
the FE/BE protocol that are implicit in the old libpq API after each
query.  The application can then insert Sync at its leisure with a new
libpq function PQpipelineSync.  This can lead to substantial reductions
in query latency.
Co-authored-by: Craig Ringer <craig.ringer@enterprisedb.com>
Co-authored-by: Matthieu Garrigues <matthieu.garrigues@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aya Iwata <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Nikhil Sontakke <nikhils@2ndquadrant.com>
Reviewed-by: Vaishnavi Prabakaran <VaishnaviP@fast.au.fujitsu.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>

Discussion: https://postgr.es/m/CAMsr+YFUjJytRyV4J-16bEoiZyH=4nj+sQ7JP9ajwz=B4dMMZw@mail.gmail.com
Discussion: https://postgr.es/m/CAJkzx4T5E-2cQe3dtv2R78dYFvz+in8PY7A8MArvLhs_pg75gg@mail.gmail.com

It's hard to avoid the conclusion that there is something wrong with
setjmp/longjmp on MinGW-64, as we have seen failures come and go after
entirely-unrelated-looking changes in our own code.  Other projects
such as Ruby have given up and started using gcc's setjmp/longjmp
builtins on that platform; this patch just follows that lead.

Note that this is a pretty fundamental ABI break for functions
containining either setjmp or longjmp, so we can't really consider
a back-patch.

Per reports from Regina Obe and Heath Lord, as well as recent failures
on buildfarm member walleye, and less-recent failures on fairywren.

Juan José Santamaría Flecha

Discussion: https://postgr.es/m/000401d716a0$1ed0fc70$5c72f550$@pcorp.us
Discussion: https://postgr.es/m/CA+BEBhvHhM-Bn628pf-LsjqRh3Ang7qCSBG0Ga+7KwhGqrNUPw@mail.gmail.com
Discussion: https://postgr.es/m/f1caef93-9640-022e-9211-bbe8755a56b0@2ndQuadrant.com

SERIALIZABLE no longer inhibits parallelism, so we can drop some
outdated workarounds and comments from regression tests.  The change
came in release 12, commit bb16aba5, but it's not really worth
back-patching.

Also fix a typo.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJUaHeK%3DHLATxF1JOKDjKJVrBKA-zmbPAebOM0Se2FQRg%40mail.gmail.com

This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.

This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.

Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.

Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp

Consistently set a flag variable that tracks whether the current heap
page has a dead item during lazy vacuum's heap scan.  We missed the
common case where there is an preexisting (or even a new) LP_DEAD heap
line pointer.

Also make it clear that the variable might be affected by an existing
line pointer, say from an earlier opportunistic pruning operation.  This
distinction is important because it's the main reason why we can't just
use the nearby tups_vacuumed variable instead.

No backpatch.  In theory failing to set the page level flag variable had
no consequences.  Currently it is only used to defensively check if a
page marked all visible has dead items, which should never happen anyway
(if it does then the table must be corrupt).

Author: Masahiko Sawada <sawada.mshk@gmail.com>
Diagnosed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAtZb4+HJT_8RoOXvu4HM-Zd4HKS3YSMCH6+-W=bDyh-w@mail.gmail.com

It's not immediately obvious what you have to do to get "make
installcheck" to work here, so document that along the same lines
as we've used elsewhere.

It does not work on all versions of perl across all platforms.

To avoid endian-ness issues, pick a new value for column a
that has the same upper 4 bytes as lower 4 bytes. Try to
make it something that isn't likely to occur anywhere nearby
in the page.

Discussion: http://postgr.es/m/29DA079B-0658-4E66-BDAA-0EFD7B64D9C6@enterprisedb.com

Fix another example of non-portable option ordering in the tests.
Oversight in 24189277.

Mark Dilger

Discussion: https://postgr.es/m/C37D28BA-3BA3-4776-B812-17F05F3472D8@enterprisedb.com

Don't try to compile src/port/pthread_barrier_wait.c if we opted out of
threads at configure time.  Revealed by build farm member gaur, which
can't compile this code because of problems with its pthread
implementation.  It shouldn't be trying to, because it's using
--disable-thread-safety.

Defect in commit 44bf3d50.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2568537.1615603606%40sss.pgh.pa.us

Commit 05c8482f added special logic related to parallel-safety of FK
triggers. This is a bit of a hack and should have instead been done by
simply setting appropriate proparallel values on those trigger functions
themselves.

Suggested-by: Tom Lane
Author: Greg Nancarrow
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/2309260.1615485644@sss.pgh.pa.us

Commit 24189277 managed to remove
one of the two places where we were checking for a "no such user"
error while leaving the other one right next to it. So remove that
too. In fact, remove the entire test, because the whole point of
this test was to see which message we got on a failure.