In 955a684e we fixed a bug in initial snapshot creation. In the
course of which several members of struct SnapBuild were obsoleted. As
SnapBuild is serialized to disk we couldn't change the memory layout.

Unfortunately I subsequently forgot about removing the backward compat
gunk, but luckily Heikki just reminded me.

This commit bumps SNAPBUILD_VERSION, therefore breaking existing
slots (which is fine in a major release).

Author: Andres Freund
Reminded-By: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/c94be044-818f-15e3-1ad3-7a7ae2dfed0a@iki.fi

The inner loop in switchToPresortedPrefixMode() can be implemented
as a conventional integer-counter for() loop, removing a couple of
redundant boolean state variables.  The old logic here was a remnant
of earlier development, but as things now stand there's no reason
for extra complexity.

Also, annotate the test case added by 82e0e293 to explain why it
manages to hit the corner case fixed in that commit, and add an
EXPLAIN to verify that it's creating an incremental-sort plan.

Back-patch to v13, like the previous patch.

James Coleman and Tom Lane

Discussion: https://postgr.es/m/16846-ae49f51ac379a4cb@postgresql.org

If ExecGetInsertedCols(), ExecGetUpdatedCols() or ExecGetExtraUpdatedCols()
were called with a ResultRelInfo that's not in the range table and isn't a
partition routing target, the functions would dereference a NULL pointer,
relinfo->ri_RootResultRelInfo. Such ResultRelInfos are created when firing
RI triggers in tables that are not modified directly. None of the current
callers of these functions pass such relations, so this isn't a live bug,
but let's make them more robust.

Also update comment in ResultRelInfo; after commit 6214e2b2,
ri_RangeTableIndex is zero for ResultRelInfos created for partition tuple
routing.

Noted by Coverity. Backpatch down to v11, like commit 6214e2b2.

Reviewed-by: Tom Lane, Amit Langote

This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.

This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.

Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.

The first attempt of this patch (commit 3b733fcd) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.

Bump catalog version.

Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com

This brings gist_page_items() and gist_page_items_bytea() in line with
nbtree's bt_page_items() function.

Minor follow-up to commit 756ab291, which added the GiST functions.

Author: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/E0794687-7315-4C29-A9C7-EC54D448596D@yandex-team.ru

GistPageSetDeleted() sets pd_lower when deleting a page, and sets the
page contents to a GISTDeletedPageContents.  Avoid treating deleted GiST
pages as regular slotted pages within pageinspect.

Oversight in commit 756ab291.

Author: Andrey Borodin <x4mmm@yandex-team.ru>

Explain which particular LP_DEAD line pointers get accounted for by the
tups_vacuumed variable.

FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value.  That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios.  Let's preserve the existing default behavior for now.

Like commit 576477e7, which did the same for Linux, back-patch to all
supported releases.

Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com

For consistency with the PostgreSQL behavior this test program is
intended to simulate, use pwrite() instead of lseek() + write().

Also fix the final "non-sync" test, which was opening and closing the
file for every write.

Discussion: https://postgr.es/m/CA%2BhUKGJjjid2BJsvjMALBTduo1ogdx2SPYaTQL3wAy8y2hc4nw%40mail.gmail.com

Author: Amit Kapila
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1610789.1613170207@sss.pgh.pa.us

While cleaning up after a parallel query or parallel index creation that
created temporary files, we could be interrupted by a statement timeout.
The error handling path would then fail to clean up the files when it
ran dsm_detach() again, because the callback was already popped off the
list.  Prevent this hazard by holding interrupts while the cleanup code
runs.

Thanks to Heikki Linnakangas for this suggestion, and also to Kyotaro
Horiguchi, Masahiko Sawada, Justin Pryzby and Tom Lane for discussion of
this and earlier ideas on how to fix the problem.

Back-patch to all supported releases.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20191212180506.GR2082@telsasoft.com

With its current design, a careless use of pg_cryptohash_final() could
would result in an out-of-bound write in memory as the size of the
destination buffer to store the result digest is not known to the
cryptohash internals, without the caller knowing about that.  This
commit adds a new argument to pg_cryptohash_final() to allow such sanity
checks, and implements such defenses.

The internals of SCRAM for HMAC could be tightened a bit more, but as
everything is based on SCRAM_KEY_LEN with uses particular to this code
there is no need to complicate its interface more than necessary, and
this comes back to the refactoring of HMAC in core.  Except that, this
minimizes the uses of the existing DIGEST_LENGTH variables, relying
instead on sizeof() for the result sizes.  In ossp-uuid, this also makes
the code more defensive, as it already relied on dce_uuid_t being at
least the size of a MD5 digest.

This is in philosophy similar to cfc40d38 for base64.c and aef8948f for
hex.c.

Reported-by: Ranier Vilela
Author: Michael Paquier, Ranier Vilela
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAEudQAoqEGmcff3J4sTSV-R_16Monuz-UpJFbf_dnVH=APr02Q@mail.gmail.com

When REG_DEBUG is defined, ensure that an un-filled "struct cnfa"
is all-zeroes, not just that it has nstates == 0.  This is mainly
so that looking at "struct subre" structs in gdb doesn't distract
one with a lot of garbage fields during regex compilation.

Adjust some places that print debug output to have suitable fflush
calls afterwards.

In passing, correct an erroneous ancient comment: the concatenation
subre-s created by parsebranch() have op == '.' not ','.

Noted while fooling around with some regex performance improvements.

The new name conveys the effect better, is more consistent with similar
functions ReadNextMultiXactId(), ReadNextFullTransactionId(), and
matches the name of the variable that it reads.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzmVR4SakBXQUdhhPpMf1aYvZCnna5%3DHKa7DAgEmBAg%2B8g%40mail.gmail.com

This grammar flavor has been added by 5fc70394.

Author: Ian Lawrence Barwick
Discussion: https://postgr.es/m/CAB8KJ=ii6JScodxkA6-DO8bjatsMYU3OcewnL0mdN9geR+tTaw@mail.gmail.com
Backpatch-through: 13

Buildfarm results show that gcc up through 7.x produces annoying
warnings for this construct (and, presumably, wouldn't do the right
thing anyway).  clang seems okay with the cutoff we have, though.

Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us

Given a regex pattern with a very long fixed prefix (approaching 500
characters), the result of pow(FIXED_CHAR_SEL, fixed_prefix_len) can
underflow to zero.  Typically the preceding selectivity calculation
would have underflowed as well, so that we compute 0/0 and get NaN.
In released branches this leads to an assertion failure later on.
That doesn't happen in HEAD, for reasons I've not explored yet,
but it's surely still a bug.

To fix, just skip the division when the pow() result is zero, so
that we'll (most likely) return a zero selectivity estimate.  In
the edge cases where "sel" didn't yet underflow, perhaps this
isn't desirable, but I'm not sure that the case is worth spending
a lot of effort on.  The results of regex_selectivity_sub() are
barely worth the electrons they're written on anyway :-(

Per report from Alexander Lakhin.  Back-patch to all supported versions.

Discussion: https://postgr.es/m/6de0a0c3-ada9-cd0c-3e4e-2fa9964b41e3@gmail.com

Modern gcc and clang compilers offer alignment sanitizers, which help to detect
pointer misalignment.  However, our codebase already contains x86-specific
crc32 computation code, which uses unalignment access.  Thankfully, those
compilers also support the attribute, which disables alignment sanitizers at
the function level.  This commit adds pg_attribute_no_sanitize_alignment(),
which wraps this attribute, and applies it to pg_comp_crc32c_sse42() function.

Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us
Author: Alexander Korotkov, revised by Tom Lane
Reviewed-by: Tom Lane

We want to test the variants of Alter Subscription that are not allowed in
the transaction block but for that, we don't need to create a subscription
that tries to connect to the publisher. As such, there is no problem with
this test but it is good to allow such tests to run with
wal_level = minimal and max_wal_senders = 0 so as to keep them consistent
with other tests.

Reported by buildfarm.

Author: Amit Kapila
Reviewed-by: Ajin Cherian
Discussion: https://postgr.es/m/CAA4eK1Lw0V+e1JPGHDq=+hVACv=14H8sR+2eJ1k3PEgwKmU-jQ@mail.gmail.com

For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.

There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.

This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.

The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.

This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.

Bump catalog version due to change of state in the catalog
(pg_subscription_rel).

Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com

The pages_removed field is no longer used for anything.  It hasn't been
possible for an index to physically shrink since old-style VACUUM FULL
was removed by commit 0a469c87.

The stanza in ECPGconnect() that intended to allow specification of a
Unix socket directory path in place of a port has never executed since
it was committed, nearly two decades ago; the preceding strrchr()
already found the last colon so there cannot be another one.  The lack
of complaints about that is doubtless related to the fact that no
user-facing documentation suggested it was possible.

Rather than try to fix that up, let's just remove the unreachable
code, and instead document the way that does work to write a socket
directory path, namely specifying it as a "host" option.

In support of that, make another pass at clarifying the syntax
documentation for ECPG connection targets, particularly documenting
which things are parsed as identifiers and where to use double quotes.
Rearrange some things that seemed poorly ordered, and fix a couple of
minor doc errors.

Kyotaro Horiguchi, per gripe from Shenhao Wang
(docs changes mostly by me)

Discussion: https://postgr.es/m/ae52a416bbbf459c96bab30b3038e06c@G08CNEXMBPEKD06.g08.fujitsu.local

Explicitly testing for INT_MIN and INT_MAX isn't particularly good
style; it's tedious and may draw useless compiler warnings on
machines where int and long are the same width.  We invented
strtoint() precisely for this usage, so use that instead.

While here, remove gratuitous variations in the way the tests for
did-strtoint-succeed were spelled.  Also, avoid attempting to
negate INT_MIN; that would probably work given that the result
is implicitly cast to uint32, but I think it's nominally undefined
behavior.

Per gripe from Ranier Vilela, though this isn't his proposed patch.

Discussion: https://postgr.es/m/CAEudQAqge3QfzoBRhe59QrB_5g+NmQUj2QpzqZ9Nc7QepXGAEw@mail.gmail.com

In the wake of c028faf2, this is no longer needed.  I left it
out of that patch since the API change would be undesirable in
a released branch; but there's no reason not to do it in HEAD.

Issue introduced by 87ae9691, noticed while working on the area.  While
on it, fix some grammar in the surrounding static assertions.

This will in particular add some good test coverage for
inet_cidr_ntop.c, which was previously completely uncovered.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/cb0c4662-4596-dab4-7f64-839c5e8582c8%40enterprisedb.com

This was accidentally included in e09155bd and is redundant with the
lines right above it.

Reported-By: Peter Eisentraut
Discussion: https://postgr.es/m/455845d1-441d-cc40-d2a7-b47f4e422489@2ndquadrant.com

Add const decorations to the *info arguments of the dump* functions,
to clarify that they don't modify that argument.  Many other nearby
functions modify their arguments, so this can help clarify these
different APIs a bit.

Discussion: https://www.postgresql.org/message-id/flat/012d3030-9a2c-99a1-ed2d-988978b5632f%40enterprisedb.com

Oversight in bd120809.

Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20210210065805.GG20012@telsasoft.com
Backpatch-through: 12

This commit makes more generic some comments and code related to the
compilation with OpenSSL and SSL in general to ease the addition of more
SSL implementations in the future.  In libpq, some OpenSSL-only code is
moved under USE_OPENSSL and not USE_SSL.

While on it, make a comment more consistent in libpq-fe.h.

Author: Daniel Gustafsson
Discussion: https://postgr.es/m/5382CB4A-9CF3-4145-BA46-C802615935E0@yesql.se

For an index, attstattarget can be updated using ALTER INDEX SET
STATISTICS.  This data was lost on the new index after REINDEX
CONCURRENTLY.

The update of this field is done when the old and new indexes are
swapped to make the fix back-patchable.  Another approach we could look
after in the long-term is to change index_create() to pass the wanted
values of attstattarget when creating the new relation, but, as this
would cause an ABI breakage this can be done only on HEAD.

Reported-by: Ronan Dunklau
Author: Michael Paquier
Reviewed-by: Ronan Dunklau, Tomas Vondra
Discussion: https://postgr.es/m/16628084.uLZWGnKmhe@laptop-ronand
Backpatch-through: 12

Currently, we get the origin id from the name and then drop the origin by
taking ExclusiveLock on ReplicationOriginRelationId. So, two concurrent
sessions can get the id from the name at the same time and then when they
try to drop the origin, one of the sessions will get the either
"tuple concurrently deleted" or "cache lookup failed for replication
origin ..".

To prevent this race condition we do the entire operation under lock. This
obviates the need for replorigin_drop() API and we have removed it so if
any extension authors are using it they need to instead use
replorigin_drop_by_name. See it's usage in pg_replication_origin_drop().

Author: Peter Smith
Reviewed-by: Amit Kapila, Euler Taveira, Petr Jelinek, and Alvaro
Herrera
Discussion: https://www.postgresql.org/message-id/CAHut%2BPuW8DWV5fskkMWWMqzt-x7RPcNQOtJQBp6SdwyRghCk7A%40mail.gmail.com

The free space map has used a dedicated relation fork rather than shared
memory segments for over a decade.

This reverts commit 3b733fcd.

Per buildfarm members prion and rorqual.

This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.

This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.

Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.

Bump catalog version.

Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com

This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM.  It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table.  This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.

This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not.  This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.

A new option switch, called --no-process-toast, is added to vacuumdb.

Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com

scanNSItemForColumn, expandNSItemAttrs, and ExpandSingleTable would
pass the wrong RTE to markVarForSelectPriv when dealing with a join
ParseNamespaceItem: they'd pass the join RTE, when what we need to
mark is the base table that the join column came from.  The end
result was to not fill the base table's selectedCols bitmap correctly,
resulting in an understatement of the set of columns that are read
by the query.  The executor would still insist on there being at
least one selectable column; but with a correctly crafted query,
a user having SELECT privilege on just one column of a table would
nonetheless be allowed to read all its columns.

To fix, make markRTEForSelectPriv fetch the correct RTE for itself,
ignoring the possibly-mismatched RTE passed by the caller.  Later,
we'll get rid of some now-unused RTE arguments, but that risks
API breaks so we won't do it in released branches.

This problem was introduced by commit 9ce77d75, so back-patch
to v13 where that came in.  Thanks to Sven Klemm for reporting
the problem.

Security: CVE-2021-20229