Issue error for SET LOCAL/CONSTRAINTS/TRANSACTION outside a transaction
block, as they have no effect.

Per suggestion from Morten Hustveit

Maciek Sakrejda

Report from Kevin Hale Boyes.

DISCARD ALL will now discard cached sequence information, as well.

Fabrízio de Royes Mello, reviewed by Zoltán Böszörményi, with some
further tweaks by me.

Gilles Darold, reviewed by Pavel Stehule

It makes for cleaner code to have separate Get/Add functions for PostingItems
and ItemPointers.  A few callsites that have to deal with both types need to
be duplicated because of this, but all the callers have to know which one
they're dealing with anyway. Overall, this reduces the amount of casting
required.

Extracted from Alexander Korotkov's larger patch to change the data page
format.

The cancel handler was uselessly set up even before the first connection
was opened.  By setting it up afterwards, the user can use Ctrl+C to
abort psql if the initial connection attempt hangs.
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Ryan Kelly <rpkelly22@gmail.com>

This is in support of a future REINDEX CONCURRENTLY feature.

Michael Paquier

With the PGXS boilerplate in place, pg_xlogdump currently fails with an
ominous error message that certain targets cannot be built because
certain files do not exist.  Remove that and instead throw a quick error
message alerting the user of the actual problem, which should be easier
to diagnose that the statu quo.

Andres Freund

Error noted by Andres Freund.

Push dependency on installdirs down to individual targets.

Christoph Berg

Previously bms_add_member() would palloc a whole-new copy of the existing
set, copy the words, and pfree the old one. repalloc() is potentially much
faster, and more importantly, this is less surprising if CurrentMemoryContext
is not the same as the context the old set is in. bms_add_member() still
allocates a new bitmapset in CurrentMemoryContext if NULL is passed as
argument, but that is a lot less likely to induce bugs.

Nicholas White.

lo_open registers the currently active snapshot, and checks if the
large object exists after that. Normally, snapshots registered by lo_open
are unregistered at end of transaction when the lo descriptor is closed, but
if we error out before the lo descriptor is added to the list of open
descriptors, it is leaked. Fix by moving the snapshot registration to after
checking if the large object exists.

Reported by Pavel Stehule. Backpatch to 8.4. The snapshot registration
system was introduced in 8.4, so prior versions are not affected (and not
supported, anyway).

Pavan Deolasee

This should have been done when the json functionality was added to
hstore in 9.3.0. To handle this correctly, the upgrade script therefore
uses conditional logic by using plpgsql in a DO statement to add the two
new functions and the new cast. If hstore_to_json_loose is detected as
already present and dependent on the hstore extension nothing is done.
This will require that the database be loaded with plpgsql.

People who have installed the earlier and spurious 1.1 version of hstore
will need to do:

	ALTER EXTENSION hstore UPDATE;

to pick up the new functions properly.

Cédric Villemain

David Rowley, after a suggestion from Heikki Linnakangas.  Reviewed by
Albe Laurenz, and further edited by me.

The behaviour in json_populate_record() and json_populate_recordset()
was changed during development but the docs were not.

There is a rare race condition, when a transaction that inserted a tuple
aborts while vacuum is processing the page containing the inserted tuple.
Vacuum prunes the page first, which normally removes any dead tuples, but
if the inserting transaction aborts right after that, the loop after
pruning will see a dead tuple and remove it instead. That's OK, but if the
page is on a table with no indexes, and the page becomes completely empty
after removing the dead tuple (or tuples) on it, it will be immediately
marked as all-visible. That's OK, but the sanity check in vacuum would
throw a warning because it thinks that the page contains dead tuples and
was nevertheless marked as all-visible, even though it just vacuumed away
the dead tuples and so it doesn't actually contain any.

Spotted this while reading the code. It's difficult to hit the race
condition otherwise, but can be done by putting a breakpoint after the
heap_page_prune() call.

Backpatch all the way to 8.4, where this code first appeared.

Previous code gave a mean delay 0.44% below target.  This change also
has the effect of increasing the maximum possible delay.

Fabien COELHO

B-tree operators are not allowed to leak memory into the current memory
context. Range_cmp leaked detoasted copies of the arguments. That caused
a quick out-of-memory error when creating an index on a range column.

Reported by Marian Krucina, bug #8468.

Though @libdir@ almost always matches @abs_builddir@ in this context,
the test could only fail if they differed.  Back-patch to 9.1, where the
test was introduced.

Hamid Quddus Akhtar

Fabien COELHO

Mike Blackwell and Robert Haas

Previously, arbitray system columns could be mentioned in table
constraints, but they were not correctly checked at runtime, because
the values weren't actually set correctly in the tuple.  Since it
seems easy enough to initialize the table OID properly, do that,
and continue allowing that column, but disallow the rest unless and
until someone figures out a way to make them work properly.

No back-patch, because this doesn't seem important enough to take the
risk of destabilizing the back branches.  In fact, this will pose a
dump-and-reload hazard for those upgrading from previous versions:
constraints that were accepted before but were not correctly enforced
will now either be enforced correctly or not accepted at all.  Either
could result in restore failures, but in practice I think very few
users will notice the difference, since the use case is pretty
marginal anyway and few users will be relying on features that have
not historically worked.

Amit Kapila, reviewed by Rushabh Lathia, with doc changes by me.

In libpq, we set up and pass to OpenSSL callback routines to handle
locking.  When we run out of SSL connections, we try to clean things
up by de-registering the hooks.  Unfortunately, we had a few calls
into the OpenSSL library after these hooks were de-registered during
SSL cleanup which lead to deadlocking.  This moves the thread callback
cleanup to be after all SSL-cleanup related OpenSSL library calls.
I've been unable to reproduce the deadlock with this fix.

In passing, also move the close_SSL call to be after unlocking our
ssl_config mutex when in a failure state.  While it looks pretty
unlikely to be an issue, it could have resulted in deadlocks if we
ended up in this code path due to something other than SSL_new
failing.  Thanks to Heikki for pointing this out.

Back-patch to all supported versions; note that the close_SSL issue
only goes back to 9.0, so that hunk isn't included in the 8.4 patch.

Initially found and reported by Vesa-Matti J Kari; many thanks to
both Heikki and Andres for their help running down the specific
issue and reviewing the patch.

When a timeline history file is fetched from server, it is initially created
with a temporary file name, and renamed to place. However, the temporary
file name was constructed using an uninitialized buffer. Usually that meant
that the file was created in current directory instead of the target, which
usually goes unnoticed, but if the target is on a different filesystem than
the current dir, the rename() would fail. Fix that.

The second issue is that pg_receivexlog would not take .partial files into
account when determining when scanning the target directory for existing
WAL files. If the timeline has switched in the server several times in the
last WAL segment, and pg_receivexlog is restarted, it would choose a too
old starting point. That's not a problem as long as the old WAL segment
exists in the server and can be streamed over, but will cause a failure if
it's not.

Backpatch to 9.3, where this timeline handling code was written.

Analysed by Andrew Gierth, bug #8453, based on a bug report on IRC.

Per complaint from Andrew Gierth.

Ian Lawrence Barwick

Etsuro Fujita

Etsuro Fujita

This has been unused since commit 8563ccae.

Noted by Antonin Houska