Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module.  The bad setting is just discarded, as though it
had never been applied at all.  (This requires a change in the API of
set_config_option.  After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)

Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value.  This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value.  Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.

This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.

In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).

We used to just remember the GucSource, but saving GucContext too provides
a little more information --- notably, whether a SET was done by a
superuser or regular user.  This allows us to rip out the fairly dodgy code
that define_custom_variable used to use to try to infer the context to
re-install a pre-existing setting with.  In particular, it now works for
a superuser to SET a extension's SUSET custom variable before loading the
associated extension, because GUC can remember whether the SET was done as
a superuser or not.  The plperl regression tests contain an example where
this is useful.

Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point.  The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation.  By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.

The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.

This variable provides only marginal error-prevention capability (since
it can only check the prefix of a qualified GUC name), and the consensus
is that that isn't worth the amount of hassle that maintaining the setting
creates for DBAs.  So, let's just remove it.

With this commit, the system will silently accept a value for any qualified
GUC name at all, whether it has anything to do with any known extension or
not.  (Unqualified names still have to match known built-in settings,
though; and you will get a WARNING at extension load time if there's an
unrecognized setting with that extension's prefix.)

There's still some discussion ongoing about whether to tighten that up and
if so how; but if we do come up with a solution, it's not likely to look
anything like custom_variable_classes.

Thus, an object referenced in a default expression could be dropped while
the function remained present.  This was unaccountably missed in the
original patch to add default parameters for functions.  Reported by
Pavel Stehule.

This patch has two distinct purposes: to report multiple problems in
postgresql.conf rather than always bailing out after the first one,
and to change the policy for whether changes are applied when there are
unrelated errors in postgresql.conf.

Formerly the policy was to apply no changes if any errors could be
detected, but that had a significant consistency problem, because in some
cases specific values might be seen as valid by some processes but invalid
by others.  This meant that the latter processes would fail to adopt
changes in other parameters even though the former processes had done so.

The new policy is that during SIGHUP, the file is rejected as a whole
if there are any errors in the "name = value" syntax, or if any lines
attempt to set nonexistent built-in parameters, or if any lines attempt
to set custom parameters whose prefix is not listed in (the new value of)
custom_variable_classes.  These tests should always give the same results
in all processes, and provide what seems a reasonably robust defense
against loading values from badly corrupted config files.  If these tests
pass, all processes will apply all settings that they individually see as
good, ignoring (but logging) any they don't.

In addition, the postmaster does not abandon reading a configuration file
after the first syntax error, but continues to read the file and report
syntax errors (up to a maximum of 100 syntax errors per file).

The postmaster will still refuse to start up if the configuration file
contains any errors at startup time, but these changes allow multiple
errors to be detected and reported before quitting.

Alexey Klyukin, reviewed by Andy Colson and av (Alexander ?)
with some additional hacking by Tom Lane

We'll now use "exists" for EXISTS(SELECT ...), "array" for ARRAY(SELECT
...), or the sub-select's own result column name for a simple expression
sub-select.  Previously, you usually got "?column?" in such cases.

Marti Raudsepp, reviewed by Kyotaro Horiugchi

Since gtrgm_penalty() is usually called many times in a row with the same
"newval" (to determine which item on an index page newval fits into best),
the makesign() calculation is repetitious.  It's expensive enough to make
it worth caching the result, so do so.  On my machine this is good for
more than a 40% savings in the time needed to build a trigram index on
/usr/share/dict/words.  This is all per a suggestion of Heikki's.

In passing, make some mostly-cosmetic improvements in the caching logic in
the other functions in this file that rely on caching info in fn_extra.

pg_trgm was already doing this unofficially, but the implementation hadn't
been thought through very well and leaked memory.  Restructure the core
GiST code so that it actually works, and document it.  Ordinarily this
would have required an extra memory context creation/destruction for each
GiST index search, but I was able to avoid that in the normal case of a
non-rescanned search by finessing the handling of the RBTree.  It used to
have its own context always, but now shares a context with the
scan-lifespan data structures, unless there is more than one rescan call.
This should make the added overhead unnoticeable in typical cases.

This code was looking at the sub-Query tree as seen in the parent query's
RangeTblEntry; but that's the pristine parser output, and what we need to
look at is the tree as it stands at the completion of planning.  Otherwise
we might pick up a Var that references a subquery that got flattened and
hence has no RelOptInfo in the subroot.  Per report from Peter Geoghegan.

passing the -b/binary-upgrade flag.

Backpatch to 9.1.X.

If an indexable operator for a non-collatable indexed datatype has a
collatable right-hand input type, any OpExpr for it will be marked with a
nonzero inputcollid (since having one collatable input is sufficient to
make that happen).  However, an index on a non-collatable column certainly
doesn't have any collation.  This caused us to fail to match such operators
to their indexes, because indxpath.c required an exact match of index
collation and clause collation.  It seems correct to allow a match when the
index is collation-less regardless of the clause's inputcollid: an operator
with both noncollatable and collatable inputs could perhaps depend on the
collation of the collatable input, but it could hardly expect the index for
the noncollatable input to have that same collation.

Per bug #6232 from Pierre Ducroquet.  His example is specifically about
"hstore ? text" but the problem seems quite generic.

oid on 8.4, modify the toast name comparison test to only apply to old
9.0+ servers.  (The test was previously 8.4+.)

Backpatch to 9.1.X.

I've made a significant effort at filling in the "Using EXPLAIN" section
to be reasonably complete about mentioning everything that EXPLAIN can
output, including the "Rows Removed" outputs that were added by Marko
Tiikkaja's recent documentation-free patch.  I also updated the examples to
be consistent with current behavior; several of them were not close to what
the current code will do.  No doubt there's more that can be done here, but
I'm out of patience for today.

Because these tests require root privileges, not to mention invasive
changes to the security configuration of the host system, it's not
reasonable for them to be invoked by a regular "make check" or "make
installcheck".  Instead, dike out the Makefile's knowledge of the tests,
and change chkselinuxenv (now renamed "test_sepgsql") into a script that
verifies the environment is workable and then runs the tests.  It's
expected that test_sepgsql will only be run manually.

While at it, do some cleanup in the error checking in the script, and
do some wordsmithing in the documentation.

We now report errors reported by the just-unblocked and unblocking
transactions identically; this should fix relatively common buildfarm
failures reported by animals that are failing the "wrong" session.

In hio.c, document how we avoid deadlock with respect to visibility map
buffer locks.  In visibilitymap.c, update the LOCKING section of the
file header comment.

Both oversights noted by Heikki Linnakangas.

Robert Haas and KaiGai Kohei

Bug found by Alvaro Herrera, fix suggested by Heikki Linnakangas
and reviewed by Tom Lane.

In commit c1d9579d, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly.  Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column.  If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression.  But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output.  Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.

The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis.  AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.

In REPEATABLE READ (nee SERIALIZABLE) mode, an attempt to do
GetTransactionSnapshot() between AbortTransaction and CleanupTransaction
failed, because GetTransactionSnapshot would recompute the transaction
snapshot (which is already wrong, given the isolation mode) and then
re-register it in the TopTransactionResourceOwner, leading to an Assert
because the TopTransactionResourceOwner should be empty of resources after
AbortTransaction.  This is the root cause of bug #6218 from Yamamoto
Takashi.  While changing plancache.c to avoid requesting a snapshot when
handling a ROLLBACK masks the problem, I think this is really a snapmgr.c
bug: it's lower-level than the resource manager mechanism and should not be
shutting itself down before we unwind resource manager resources.  However,
just postponing the release of the transaction snapshot until cleanup time
didn't work because of the circular dependency with
TopTransactionResourceOwner.  Fix by managing the internal reference to
that snapshot manually instead of depending on TopTransactionResourceOwner.
This saves a few cycles as well as making the module layering more
straightforward.  predicate.c's dependencies on TopTransactionResourceOwner
go away too.

I think this is a longstanding bug, but there's no evidence that it's more
than a latent bug, so it doesn't seem worth any risk of back-patching.

Cache assorted data in the PLpgSQL_arrayelem struct to avoid repetitive
catalog lookups over multiple executions of the same statement.

Pavel Stehule

This was partially fixed by 57fdb2b0,
back in 2005, but it missed a couple of spots.

YAMAMOTO Takashi

The code path that tried a generic plan, didn't like it, and then made a
custom plan was mistakenly passing the same copy of the query_list to the
planner both times.  This doesn't work too well for nontrivial queries,
since the planner tends to scribble on its input.  Diagnosis and fix by
Yamamoto Takashi.

The keywords and values arguments of these functions are more properly
declared "const char * const *" than just "const char **".

Lionel Elie Mamane, reviewed by Craig Ringer

I had copied-and-pasted a claim that we couldn't reach this point when
dealing with utility statements, but that was a leftover from when the
caller was required to supply a plan to start with.  We now will go
through here at least once when handling a utility statement, so it
seems worth a check to see whether a snapshot is actually needed.
(Note that analyze_requires_snapshot is quite a cheap test.)

Per suggestion from Yamamoto Takashi.  I don't think I believe that this
resolves his reported assertion failure; but it's worth changing anyway,
just to save a cycle or two.

files so include removal is more predictable.

pg_dump has historically understood -Z with no -F switch to mean that
it should emit a gzip-compressed version of its plain text output.
This got broken through a misunderstanding in the 9.1 patch that added
directory output format.  Restore the former behavior.

Per complaint from Roger Niederland and diagnosis by Adrian Klaver.

The constraint exclusion feature checks for contradictions among scan
restriction clauses, as well as contradictions between those clauses and a
table's CHECK constraints.  The first aspect of this testing can be useful
for non-table relations (such as subqueries or functions-in-FROM), but the
feature was coded with only the CHECK case in mind so we were applying it
only to plain-table RTEs.  Move the relation_excluded_by_constraints call
so that it is applied to all RTEs not just plain tables.  With the default
setting of constraint_exclusion this results in no extra work, but with
constraint_exclusion = ON we will detect optimizations that we missed
before (at the cost of more planner cycles than we expended before).

Per a gripe from Gunnlaugur Þór Briem.  Experimentation with
his example also showed we were not being very bright about the case where
constraint exclusion is proven within a subquery within UNION ALL, so tweak
the code to allow set_append_rel_pathlist to recognize such cases.

This mode still exists for backwards compatibility, making
sslmode=require the same as sslmode=verify-ca when the file is present,
but not causing an error when it isn't.

Per bug 6189, reported by Srinivas Aji

We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT".  (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.)  So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.

As written, this patch will also result in mapping "Central America
Daylight Time" to CST6.  I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries.  Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.

Per complaint from Pratik Chirania.

I wasn't aware of this script till Magnus mentioned it just now ...