The mess cleaned up in commit da075960 is clear evidence that it's a
bug hazard to expect the caller of get_attstatsslot()/free_attstatsslot()
to provide the correct type OID for the array elements in the slot.
Moreover, we weren't even getting any performance benefit from that,
since get_attstatsslot() was extracting the real type OID from the array
anyway.  So we ought to get rid of that requirement; indeed, it would
make more sense for get_attstatsslot() to pass back the type OID it found,
in case the caller isn't sure what to expect, which is likely in binary-
compatible-operator cases.

Another problem with the current implementation is that if the stats array
element type is pass-by-reference, we incur a palloc/memcpy/pfree cycle
for each element.  That seemed acceptable when the code was written because
we were targeting O(10) array sizes --- but these days, stats arrays are
almost always bigger than that, sometimes much bigger.  We can save a
significant number of cycles by doing one palloc/memcpy/pfree of the whole
array.  Indeed, in the now-probably-common case where the array is toasted,
that happens anyway so this method is basically free.  (Note: although the
catcache code will inline any out-of-line toasted values, it doesn't
decompress them.  At the other end of the size range, it doesn't expand
short-header datums either.  In either case, DatumGetArrayTypeP would have
to make a copy.  We do end up using an extra array copy step if the element
type is pass-by-value and the array length is neither small enough for a
short header nor large enough to have suffered compression.  But that
seems like a very acceptable price for winning in pass-by-ref cases.)

Hence, redesign to take these insights into account.  While at it,
convert to an API in which we fill a struct rather than passing a bunch
of pointers to individual output arguments.  That will make it less
painful if we ever want further expansion of what get_attstatsslot can
pass back.

It's certainly arguable that this is new development and not something to
push post-feature-freeze.  However, I view it as primarily bug-proofing
and therefore something that's better to have sooner not later.  Since
we aren't quite at beta phase yet, let's put it in.

Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us

The fact that we didn't have this in the first place is likely why
the problem fixed by f8bffe9e
escaped detection.

Patch by Amit Langote, reviewed and slightly adjusted by me.

Discussion: http://postgr.es/m/CA+TgmoYWnV2GMnYLG-Czsix-E1WGAbo4D+0tx7t9NdfYBDMFsA@mail.gmail.com

The old logic was just plain wrong.

Report by Olaf Gawenda.  Patch by Amit Langote, reviewed by
Beena Emerson and by me.  Minor adjustments by me also.

On faster machines, the overall runtime for running the core regression
tests is under twenty seconds these days, of which the hard-wired delays
in the stats test are a significant fraction.  But on closer inspection,
it seems like we shouldn't need those.

The initial 2-second delay is there only to reduce the risk of the test's
stats messages not getting sent due to contention.  But analysis of the
last ten years' worth of buildfarm runs shows no evidence that such
failures actually occur.  (We do see failures that look like stats
messages not getting sent, particularly on Windows; but there is little
reason to believe that the initial delay reduces their frequency.)

The later 1-second delay is there to ensure that our session's stats
will have gotten sent.  But we could also do that by starting a fresh
session, which takes well under 1 second even on very slow machines.

Hence, let's remove both delays and see what happens.  The first delay
was the only test of pg_sleep_for() in the regression tests, but we can
move that responsibility into wait_for_stats().

Discussion: https://postgr.es/m/17795.1493869423@sss.pgh.pa.us

This way we only need to specify the number of tests in one place, and
the output is also less verbose.

Tab-completing DROP STATISTICS would only work if you started writing
the schema name containing the statistics object, because the visibility
clause was missing.  To add it, we need to add SQL-callable support for
testing visibility of a statistics object, like all other object types
already have.

Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us

We have now grown enough registerable syscache-invalidation callback
functions that the original assumption that there would be few of them
is causing performance problems.  In particular, let's fix things so that
CallSyscacheCallbacks doesn't have to search the whole array to find
which callback(s) to invoke for a given cache ID.  Preserve the original
behavior that callbacks are called in order of registration, just in
case there's someplace that depends on that (which I doubt).

In support of this, export the number of syscaches from syscache.h.
People could have found that out anyway from the enum, but adding a
#define makes that much safer.

This provides a useful additional speedup in Mathieu Fenniak's
logical-decoding test case, although we're reaching the point of
diminishing returns there.  I think any further improvement will have
to come from reducing the number of cache invalidations that are
triggered in the first place.  Still, we can hope that this change
gives some incremental benefit for all invalidation scenarios.

Back-patch to 9.4 where logical decoding was introduced.

Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com

This has to be backpatched to all supported releases so release markup
added to HEAD and copied to back branches matches the existing markup.

Reported-by: Peter Eisentraut

Discussion: 2b8a2552-fffa-f7c8-97c5-14db47a87731@2ndquadrant.com

Author: initial patch and sample markup by Peter Eisentraut

Backpatch-through: 9.2

A test case provided by Mathieu Fenniak shows that hash_seq_search'ing
this hashtable can consume a very significant amount of overhead during
logical decoding, which triggers frequent cache invalidation.  Testing
suggests that the actual population of the hashtable is often no more
than a few dozen entries, so we can cut the overhead just by dropping
the initial number of buckets down from 1024 --- I chose to cut it to 64.
(In situations where we do have a significant number of entries, we
shouldn't get any real penalty from doing this, as the dynahash.c code
will resize the hashtable automatically.)

This gives a further factor-of-two savings in Mathieu's test case.
That may be overly optimistic for real-world benefit, as real cases
may have larger average table populations, but it's hard to see it
turning into a net negative for any workload.

Back-patch to 9.4 where relfilenodemap.c was introduced.

Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com

This was missed in 7b504eb2.

Remove the "default:" clause in the switch, to avoid this problem in the
future.  Other switches involving the same enum should probably be
changed in the same way, but are not touched by this patch.

Discussion: https://postgr.es/m/20170512204800.iqt2uwyx3c32j45r@alvherre.pgsql

A test case provided by Mathieu Fenniak shows that the initial search for
the target catcache in CatalogCacheIdInvalidate consumes a very significant
amount of overhead in cases where cache invalidation is triggered but has
little useful work to do.  There is no good reason for that search to exist
at all, as the index array maintained by syscache.c allows direct lookup of
the catcache from its ID.  We just need a frontend function in syscache.c,
matching the division of labor for most other cache-accessing operations.

While there's more that can be done in this area, this patch alone reduces
the runtime of Mathieu's example by 2X.  We can hope that it offers some
useful benefit in other cases too, although usually cache invalidation
overhead is not such a striking fraction of the total runtime.

Back-patch to 9.4 where logical decoding was introduced.  It might be
worth going further back, but presently the only case we know of where
cache invalidation is really a significant burden is in logical decoding.
Also, older branches have fewer catcaches, reducing the possible benefit.

(Note: although this nominally changes catcache's API, we have always
documented CatalogCacheIdInvalidate as a private function, so I would
have little sympathy for an external module calling it directly.  So
backpatching should be fine.)

Discussion: https://postgr.es/m/CAHoiPjzea6N0zuCi=+f9v_j94nfsy6y8SU7-=bp4=7qw6_i=Rg@mail.gmail.com

A stats object ought to have a dependency on each individual column
it reads, not the entire table.  Doing this honestly lets us get rid
of the hard-wired logic in RemoveStatisticsExt, which seems to have
been misguidedly modeled on RemoveStatistics; and it will be far easier
to extend to multiple tables later.

Also, add overlooked dependency on owner, and make the dependency on
schema be NORMAL like every other such dependency.

There remains some unfinished work here, which is to allow statistics
objects to be extension members.  That takes more effort than just
adding the dependency call, though, so I left it out for now.

initdb forced because this changes the set of pg_depend records that
should exist for a statistics object.

Discussion: https://postgr.es/m/22676.1494557205@sss.pgh.pa.us

Previously, we had the WITH clause in the middle of the command, where
you'd specify both generic options as well as statistic types.  Few
people liked this, so this commit changes it to remove the WITH keyword
from that clause and makes it accept statistic types only.  (We
currently don't have any generic options, but if we invent in the
future, we will gain a new WITH clause, probably at the end of the
command).

Also, the column list is now specified without parens, which makes the
whole command look more similar to a SELECT command.  This change will
let us expand the command to supporting expressions (not just columns
names) as well as multiple tables and their join conditions.

Tom added lots of code comments and fixed some parts of the CREATE
STATISTICS reference page, too; more changes in this area are
forthcoming.  He also fixed a potential problem in the alter_generic
regression test, reducing verbosity on a cascaded drop to avoid
dependency on message ordering, as we do in other tests.

Tom also closed a security bug: we documented that table ownership was
required in order to create a statistics object on it, but didn't
actually implement it.

Implement tab-completion for statistics objects.  This can stand some
more improvement.

Authors: Alvaro Herrera, with lots of cleanup by Tom Lane
Discussion: https://postgr.es/m/20170420212426.ltvgyhnefvhixm6i@alvherre.pgsql

Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>

Other previously used terms were "WAL position" or "log position".

This makes documentation and error messages match the renaming of "xlog"
to "wal" in APIs and file naming.

On MSVC builds and on back branches that means removing the hardcoded
--verbose setting. On master for Unix that means removing the empty
setting in the global Makefile so that the value can be acquired from
the environment as well as from the make arguments.

Backpatch to 9.4 where we introduced TAP tests

On Unix this path is detected via the use of xml2-config, but that's not
available on Windows. This means that users building with libxml2 will
no longer need to move things around from the standard libxml2
installation for MSVC builds.

Backpatch to all live branches.

Author: Michael Paquier <michael.paquier@gmail.com>

For CREATE/ALTER PUBLICATION/SUBSCRIPTION, use similar option style as
other statements that use a WITH clause for options.

Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>

Certain recovery tests use the Perl IPC::Run module's start/kill_kill
method of processing. On at least some versions of perl this causes the
whole process and its caller to crash. If we ever find a better way of
doing these tests they can be re-enabled on this platform. This does not
affect Mingw or Cygwin builds, which use a different perl and a
different shell and so are not affected.

Lag tracking is called for each commit, but we introduce
a pacing delay to ensure we don't swamp the lag tracker.

Author: Petr Jelinek, with minor pacing delay code from me

Thinko in commit abb17339, which introduced this function.

Report: https://postgr.es/m/20170511215234.1795.54347@wrigleys.postgresql.org

Increase from the historical value of 32 to 64.  We are up to 31 callers
of CacheRegisterSyscacheCallback() in HEAD, so if they were all to be
exercised in one process that would leave only one slot for add-on modules.
It's probably not possible for that to happen, but still we clearly need
more daylight here.  (At some point it might be worth making the array
dynamically resizable; but since we've never heard a complaint of "out of
syscache_callback_list slots" happening in the field, I doubt it's worth
it yet.)

Back-patch as far as 9.4, which is where we increased the companion limit
MAX_RELCACHE_CALLBACKS (cf commit f01d1ae3).  It's not as urgent in
released branches, which have only a couple dozen call sites in core, but
it still seems that somebody might hit the limit before these branches die.

Discussion: https://postgr.es/m/12184.1494450131@sss.pgh.pa.us

Per discussion, "location" is a rather vague term that could refer to
multiple concepts.  "LSN" is an unambiguous term for WAL locations and
should be preferred.  Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position".  Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.

David Rowley, minor additional docs hacking by me

Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com

This reverts commits fa2fa995 and 42f50cb8.

While the functionality that was intended to be provided by these
commits is desired, the patch didn't actually solve as many of the
problematic situations as we hoped, and it created a bunch of its own
problems.  Since we're going to require more extensive changes soon for
other reasons and users have been working around these problems for a
long time already, there is no point in spending effort in fixing this
halfway measure.

Per complaint from Tom Lane.
Discussion: https://postgr.es/m/21407.1484606922@sss.pgh.pa.us

(Commit fa2fa995 had already been reverted in branches 9.5 as
f858524ee4f and 9.6 as e9e44a0953, so this touches master only.
Commit 42f50cb8 was not present in the older branches.)

Thomas Munro

Discussion: http://postgr.es/m/CAEepm=3vV1YKxDfLMqq-nYM2fN+STMYLwPKFCoah4M0gxqqNNg@mail.gmail.com

Amit Langote, per report from 甄明洋

Discussion: http://postgr.es/m/57bd1e1.1886.15bd7b79cee.Coremail.18612389267@yeah.net

Amit Langote, reviewed Thomas Munro and by me.

Discussion: http://postgr.es/m/CA+Tgmoadpcs3=mMgdyqVX7L7L_PwO_Dn5j-98a6Tj7ByBuimUQ@mail.gmail.com

Because commit ea69a0de bumped the
HASH_VERSION, we don't need to worry about PostgreSQL 10 seeing
bucket pages from earlier versions.

Amit Kapila

Discussion: http://postgr.es/m/CAA4eK1LAo4DGwh+mi-G3U8Pj1WkBBeFL38xdCnUHJv1z4bZFkQ@mail.gmail.com

Etsuro Fujita

Discussion: http://postgr.es/m/968d99bf-0fa8-085b-f0a1-a379f8d661ff@lab.ntt.co.jp

Thomas Munro, per off-list report from Prabhat Sabu.  Changes
to the message wording for consistency with the existing
relkind check for partitioned tables by me.

Discussion: http://postgr.es/m/CAEepm=2xJFFpGM+N=gpWx-9Nft2q1oaFZX07_y23AHCrJQLt0g@mail.gmail.com

Prior to this prohibition, such a trigger caused a crash.

Thomas Munro, per a report from Neha Sharma.  I added a
regression test.

Discussion: http://postgr.es/m/CAEepm=0VR5W-N38eTkO_FqJbGqQ_ykbBRmzmvHyxDhy1p=0Csw@mail.gmail.com

Since a rescan is possible, we must be able to rewind.

Thomas Munro, per a report from Prabhat Sabu

Discussion: http://postgr.es/m/CAEepm=2=Uv5fm=exqL+ygBxaO+-tgmC=o+63H4zYAXi9HtXf1w@mail.gmail.com

Amit Langote, per an observation by me.

Discussion: http://postgr.es/m/CA+TgmoYWnV2GMnYLG-Czsix-E1WGAbo4D+0tx7t9NdfYBDMFsA@mail.gmail.com

Previously, the memory used by the logical replication apply worker for
processing messages would never be freed, so that could end up using a
lot of memory.  To improve that, change the existing ApplyContext memory
context to ApplyMessageContext and reset that after every
message (similar to MessageContext used elsewhere).  For consistency of
naming, rename the ApplyCacheContext to ApplyContext.

Author: Stas Kelvich <s.kelvich@postgrespro.ru>

Add a (void) cast to all PQcancel() calls that purposefully don't check
the return value, to keep compilers and static checkers happy.

Per Coverity.

Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>

Add some more information about managing replication slots associated
with logical replication subscriptions.