The patch that turned XLogRecPtr into a uint64 inadvertently changed the
on-disk format of GiST indexes, because the NSN field in the GiST page
opaque is an XLogRecPtr. That breaks pg_upgrade. Revert the format of that
field back to the two-field struct that XLogRecPtr was before. This is the
same we did to LSNs in the page header to avoid changing on-disk format.

Bump catversion, as this invalidates any existing GiST indexes built on
9.3devel.

It's better to start from what the OpenSSL people consider a good
default and then remove insecure things (low encryption, exportable
encryption and md5 at this point) from that, instead of starting
from everything that exists and remove from that. We trust the
OpenSSL people to make good choices about what the default is.

This way the line doesn't shift right as the amount of data processed
increases.

When truncating at the end, like before, the output would often end up
just showing the path instead of the filename.

Also increase the length of the filename by 5, which still keeps us at
less than 80 characters in most outputs.

On top of the previous support in pg_dump, add support to specify
multiple tables (by using the -t option multiple times) to
pg_restore, clsuterdb, reindexdb and vacuumdb.

Josh Kupershmidt, reviewed by Karl O. Pinc

It was largely full of outdated and incorrect information.  Move the few
notes which were still relevant into header comments of pg_backup_tar.c
and pg_dumpall.c.

Josh Kupershmidt

This new facility can not only be used by xlog.c to carry out crash
recovery, but also by external programs.  By supplying a function to
read XLog pages from somewhere, all the WAL reading can be used for
completely different purposes.

For the standard backend use, the behavior should be pretty much the
same as previously.  As for non-backend programs, an hypothetical
pg_xlogdump program is now closer to reality, but some more backend
support is still necessary.

This patch was originally submitted by Andres Freund in a different
form, but Heikki Linnakangas opted for and authored another design of
the concept.  Andres has advanced the patch since Heikki's initial
version.  Review and some (mostly cosmetics) changes by me.

On second thought, "none" could mislead to think that you're connected a
database with that name. Duplicate the whole string, so that it can be
more easily translated. In back-branches, thought, just use an empty string
in place of the database name, to avoid adding a translatable string.

Backpatch all the way to 8.3. Fixes bug #7811, per report and diagnosis by
Meng Qingzhong.

When attempting to move an object into the schema in which it already
was, for most objects classes we were correctly complaining about
exactly that ("object is already in schema"); but for some other object
classes, such as functions, we were instead complaining of a name
collision ("object already exists in schema").  The latter is wrong and
misleading, per complaint from Robert Haas in
CA+TgmoZ0+gNf7RDKRc3u5rHXffP=QjqPZKGxb4BsPz65k7qnHQ@mail.gmail.com

To fix, refactor the way these checks are done.  As a bonus, the
resulting code is smaller and can also share some code with Rename
cases.

While at it, remove use of getObjectDescriptionOids() in error messages.
These are normally disallowed because of translatability considerations,
but this one had slipped through since 9.1.  (Not sure that this is
worth backpatching, though, as it would create some untranslated
messages in back branches.)

This is loosely based on a patch by KaiGai Kohei, heavily reworked by
me.

The WAL streaming message format changed in 9.3, so 9.3 pg_basebackup or
pg_receivelog won't work against older servers.

Original coding would corrupt the hashtable if the item being updated was
at the end of its bucket chain and the new hash key hashed to that same
bucket.  Diagnosis and fix by Heikki Linnakangas.

Because the return value of lseek() was assigned to an unsigned size_t
variable, we'd fail to notice an error return code -1. Compiler gave a
warning about this.

Andres Freund

This was legal back in the days of add_missing_from, though perhaps
never good style.  It's not legal anymore ...

Jan Urbański

Dates outside the supported range could be entered, but would not print
reasonably, and operations such as conversion to timestamp wouldn't behave
sanely either.  Since this has the potential to result in undumpable table
data, it seems worth back-patching.

Hitoshi Harada

This seems to have been invented in 2011 to represent GMT+3, non daylight
savings rules, as now used in Europe/Kaliningrad and Europe/Minsk.
There are no conflicts so might as well add it to the Default list.
Per bug #7804 from Ruslan Izmaylov.

Andres Freund

The code in PostPrepare_Locks supposed that it could reassign locks to
the prepared transaction's dummy PGPROC by deleting the PROCLOCK table
entries and immediately creating new ones.  This was safe when that code
was written, but since we invented partitioning of the shared lock table,
it's not safe --- another process could steal away the PROCLOCK entry in
the short interval when it's on the freelist.  Then, if we were otherwise
out of shared memory, PostPrepare_Locks would have to PANIC, since it's
too late to back out of the PREPARE at that point.

Fix by inventing a dynahash.c function to atomically update a hashtable
entry's key.  (This might possibly have other uses in future.)

This is an ancient bug that in principle we ought to back-patch, but the
odds of someone hitting it in the field seem really tiny, because (a) the
risk window is small, and (b) nobody runs servers with maxed-out lock
tables for long, because they'll be getting non-PANIC out-of-memory errors
anyway.  So fixing it in HEAD seems sufficient, at least until the new
code has gotten some testing.

Forgot I was going to do this as part of the previous patch ...

In commit 71450d7f, we added code to inform
suitably-intelligent compilers that ereport() doesn't return if the elevel
is ERROR or higher.  This patch extends that to elog(), and also fixes a
double-evaluation hazard that the previous commit created in ereport(),
as well as reducing the emitted code size.

The elog() improvement requires the compiler to support __VA_ARGS__, which
should be available in just about anything nowadays since it's required by
C99.  But our minimum language baseline is still C89, so add a configure
test for that.

The previous commit assumed that ereport's elevel could be evaluated twice,
which isn't terribly safe --- there are already counterexamples in xlog.c.
On compilers that have __builtin_constant_p, we can use that to protect the
second test, since there's no possible optimization gain if the compiler
doesn't know the value of elevel.  Otherwise, use a local variable inside
the macros to prevent double evaluation.  The local-variable solution is
inferior because (a) it leads to useless code being emitted when elevel
isn't constant, and (b) it increases the optimization level needed for the
compiler to recognize that subsequent code is unreachable.  But it seems
better than not teaching non-gcc compilers about unreachability at all.

Lastly, if the compiler has __builtin_unreachable(), we can use that
instead of abort(), resulting in a noticeable code savings since no
function call is actually emitted.  However, it seems wise to do this only
in non-assert builds.  In an assert build, continue to use abort(), so that
the behavior will be predictable and debuggable if the "impossible"
happens.

These changes involve making the ereport and elog macros emit do-while
statement blocks not just expressions, which forces small changes in
a few call sites.

Andres Freund, Tom Lane, Heikki Linnakangas

This is now used by ecpg tests, and not clobbered by pg_upgrade
tests. This change won't affect anything that doesn't set this
environment variable, but will enable the buildfarm to control
exactly what port regression test installs will be running on,
and thus to detect possible rogue postmasters more easily.

Backpatch to release 9.2 where EXTRA_REGRESS_OPTS was first used.

Historically we've used a couple of very ad-hoc fudge factors to try to
get the right results when indexes of different sizes would satisfy a
query with the same number of index leaf tuples being visited.  In
commit 21a39de5 I tweaked one of these
fudge factors, with results that proved disastrous for larger indexes.
Commit bf01e34b fudged it some more,
but still with not a lot of principle behind it.

What seems like a better way to address these issues is to explicitly model
index-descent costs, since that's what's really at stake when considering
diferent indexes with similar leaf-page-level costs.  We tried that once
long ago, and found that charging random_page_cost per page descended
through was way too much, because upper btree levels tend to stay in cache
in real-world workloads.  However, there's still CPU costs to think about,
and the previous fudge factors can be seen as a crude attempt to account
for those costs.  So this patch replaces those fudge factors with explicit
charges for the number of tuple comparisons needed to descend the index
tree, plus a small charge per page touched in the descent.  The cost
multipliers are chosen so that the resulting charges are in the vicinity of
the historical (pre-9.2) fudge factors for indexes of up to about a million
tuples, while not ballooning unreasonably beyond that, as the old fudge
factor did (even more so in 9.2).

To make this work accurately for btree indexes, add some code that allows
extraction of the known root-page height from a btree.  There's no
equivalent number readily available for other index types, but we can use
the log of the number of index pages as an approximate substitute.

This seems like too much of a behavioral change to risk back-patching,
but it should improve matters going forward.  In 9.2 I'll just revert
the fudge-factor change.

I notice that plperl's makefile adds the -I for $perl_archlibexp/CORE
at the end of CPPFLAGS not the beginning.  It seems somewhat unlikely
that the include search order has anything to do with why buildfarm
member okapi is failing, but I'm about out of other ideas.

It appears that perl_embed_ldflags should already mention all the libraries
that are required by libperl.so itself.  So let's try the test link with
just those and not the other LIBS we've found up to now.  This should
more nearly reproduce what will happen when plperl is linked, and perhaps
will fix buildfarm member okapi's problem.

Although most platforms seem to package Perl in such a way that these files
are present even in basic Perl installations, Debian does not.  Hence, make
an effort to fail during configure rather than build if --with-perl was
given and these files are lacking.  Per gripe from Josh Berkus.

This means we can now construct a configure test for the library
presence. Previously these parameters were only figured out at
build time in plperl's GnuMakefile.

JiangGuiqing

Fixes segmentation fault during regular use.

Fujii Masao

This patch implements parallel copying/linking of files by tablespace
using the --jobs option in pg_upgrade.

If VirtualXactLock() has to wait for a transaction that holds its VXID lock
as a fast-path lock, it must first convert the fast-path lock to a regular
lock.  It failed to take the required "partition" lock on the main
shared-memory lock table while doing so.  This is the direct cause of the
assert failure in GetLockStatusData() recently observed in the buildfarm,
but more worryingly it could result in arbitrary corruption of the shared
lock table if some other process were concurrently engaged in modifying the
same partition of the lock table.  Fortunately, VirtualXactLock() is only
used by CREATE INDEX CONCURRENTLY and DROP INDEX CONCURRENTLY, so the
opportunities for failure are fewer than they might have been.

In passing, improve some comments and be a bit more consistent about
order of operations.

Report by me.  Fix by KaiGai Kohei.

(-i), producing only one progress message per 5 seconds along with
elapsed time and estimated remaining time.  Also add elapsed time and
estimated remaining time to the default logging(prints one message
each 100000 rows).
Patch contributed by Tomas Vondra, reviewed by Jeevan Chalke and
Tatsuo Ishii.

Pre-Lion versions of Apple's linker don't allow space between -F and its
argument.  (Snow Leopard is nice enough to tell you that in so many words,
but older versions just fail with very obscure link errors, as seen on
buildfarm member locust for instance.)  Oversight in commit
fc874507.

Adds commandline option -R to pg_basebackup that creates a recovery.conf which
enables standby mode using the same parameters that pg_basebackup used to
connect to the master, and writes it into the output directory (or injects it
in the tar file when tar format is used).

Zoltan Boszormenyi, modified by Magnus Hagander, reviewed by Amit Kapila & Fujii Masao

For code-reuse in upcoming functionality in pg_basebackup.

Zoltan Boszormenyi

The PL/Python build on OS X was previously hardcoded to use the system
installation of Python, ignoring whatever was specified to configure.
Except that it would use the header files from configure, which could
lead to mismatches.  It was not possible to build against a custom
Python installation.

Now, we check in configure how the specified Python installation was
built and use that, supporting framework and non-framework builds.