This simplifies logic / reduces duplication in a few headers.

Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com

Noticed thanks to buildfarm animal seawasp.

Author: Andres Freund
Backpatch: v11-, where LLVM based JIT compliation was introduced.

While we generally don't sweat too much about "may be used uninitialized"
warnings from older compilers, I noticed that there's a fair number of
buildfarm animals that are producing such a warning *only* for this
variable.  So it seems worth silencing.

Since 5220bb75, not only Append, but also MergeAppend support the
operation.

Author: Amit Langote
Discussion: https://postgr.es/m/59d8eb92-4536-c44e-54e2-305b9b3d8eb7@lab.ntt.co.jp

This just converts a few for loops in postgres.c to declare variables
in the loop initializer, and uses designated initializers in smgr.c's
definition of smgr callbacks.

Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com

In 86d78ef5 I enabled configure to check for C99 support, with the
goal of checking which platforms support C99.  While there are a few
machines without C99 support among our buildfarm animals,
de-supporting them for v12 was deemed acceptable.

While not tested in aforementioned commit, the biggest increase in
minimum compiler version comes from MSVC, which gained C99 support
fairly late. The subset in MSVC 2013 is sufficient for our needs, at
this point. While that is a significant increase in minimum version,
the existing windows binaries are already built with a new enough
version.

Make configure error out if C99 support could not be detected. For
MSVC builds, increase the minimum version to 2013.

The increase to MSVC 2013 allows us to get rid of VCBuildProject.pm,
as that was only required for MSVC 2005/2008.

Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com

A VACUUM or ANALYZE command listing directly a partitioned table expands
it to its partitions, causing all elements of a tree to be processed
with individual ownership checks done.  This results in different
relation skips depending on the ownership policy of a tree, which may
not be consistent for a partition tree.  This commit adds more tests to
ensure that any future refactoring allows to keep a consistent behavior,
or at least that any changes done are easily identified and checked.
The current behavior of VACUUM with partitioned tables is present since
10.

Author: Nathan Bossart
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/DC186201-B01F-4A66-9EC4-F855A957C1F9@amazon.com

Code in slot_getallattrs() is the same as if slot_getsomeattrs() is
called with number of attributes specified in the tuple
descriptor. Implement it that way instead of duplicating the code
between those two functions.

This is part of a patchseries abstracting TupleTableSlots so they can
store arbitrary forms of tuples, but is a nice enough cleanup on its
own.

Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de

Commits c6b3c939 (which fixed the precedence of >=, <=, <> operators)
and 865f14a2 (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.

The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:

1. If immediately followed by a comment or +-, >= <= <> would be given
   the old precedence of Op rather than the correct new precedence;

2. If followed by a comment, != would be returned as Op rather than as
   NOT_EQUAL, causing it not to be found at all;

3. If followed by a comment or +-, the => token for named arguments
   would be lexed as Op, causing the argument to be mis-parsed as a
   simple expression, usually causing an error.

Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.

Backpatch to 9.5 where the problem was introduced.

Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk

The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.

Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.

Historically, we looked up the target hostname in connectDBStart, so that
PQconnectPoll did not need to do DNS name resolution.  The patches that
added multiple-target-host support to libpq preserved this division of
labor; but it's really nonsensical now, because it means that if any one
of the target hosts fails to resolve in DNS, the connection fails.  That
negates the no-single-point-of-failure goal of the feature.  Additionally,
DNS lookups aren't exactly cheap, but the code did them all even if the
first connection attempt succeeds.

Hence, rearrange so that PQconnectPoll does the lookups, and only looks
up a hostname when it's time to try that host.  This does mean that
PQconnectPoll could block on a DNS lookup --- but if you wanted to avoid
that, you should be using hostaddr, as the documentation has always
specified.  It seems fairly unlikely that any applications would really
care whether the lookup occurs inside PQconnectStart or PQconnectPoll.

In addition to calling out that fact explicitly, do some other minor
wordsmithing in the docs around the multiple-target-host feature.

Since this seems like a bug in the multiple-target-host feature,
backpatch to v10 where that was introduced.  In the back branches,
avoid moving any existing fields of struct pg_conn, just in case
any third-party code is looking into that struct.

Tom Lane, reviewed by Fabien Coelho

Discussion: https://postgr.es/m/4913.1533827102@sss.pgh.pa.us

Reformat synopsis, put options into better order, make the desciption
line a bit shorter, and put more details into the description.

This test was supposed to check the interaction of INOUT and default
parameters in a procedure call, but it only checked the case where the
parameter was not supplied.  Now it also checks the case where the
parameter was supplied.  It was already working correctly, so no code
changes required.

Thinko in commit 857ee8e3.

Discovered-by: Gianni Ciolli

Some text was still claiming that committing transactions was not
possible in PL/pgSQL.

Since procedures are now a different thing from functions, change the
CREATE TRIGGER and CREATE EVENT TRIGGER syntax to use FUNCTION in the
clause that specifies the function.  PROCEDURE is still accepted for
compatibility.

pg_dump and ruleutils.c output is not changed yet, because that would
require a change in information_schema.sql and thus a catversion change.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>

Since procedures are now a different thing from functions, change the
CREATE OPERATOR syntax to use FUNCTION in the clause that specifies the
function.  PROCEDURE is still accepted for compatibility.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>

Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL.  Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.

In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions".  (The latter already used FUNCTION in the SQL
syntax anyway.)  Also, the terminology in the SPI chapter has been
cleaned up.

A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>

Per complaint from Michael Paquier.

Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f8YkwojSTSg8YjNYCLCXzx0fR7wBR3Gf%2BrA9_52eoPZKg%40mail.gmail.com

This commit prevents a crash of pg_dump caused by the exclusion of a
table which has identity columns, as the table would be correctly
excluded but not its identity sequence.  In order to fix that, identity
sequences are excluded if the parent table is defined as such.  Knowing
about such sequences has no meaning without their parent table anyway.

Reported-by: Andy Abelisto
Author: David Rowley
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/153479393218.1316.8472285660264976457@wrigleys.postgresql.org
Backpatch-through: 10

When a user does not have ownership on a relation, then specific log
messages are generated.  This new test suite adds coverage for all the
possible log messages generated, which will be useful to check the
consistency of any refactoring related to ownership checks for relations
vacuumed or analyzed.

Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/20180812222142.GA6097@paquier.xyz

While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot.  A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
- GetConfigOptionByNum should translate strings.  This part is not
back-patched as after a minor upgrade this could be surprising for
users.

Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3

Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20180821.115841.93250330.horiguchi.kyotaro@lab.ntt.co.jp

The new wording comes from Álvaro, which I modified a bit.

Reported-by: Andres Freund, Álvaro Herrera
Author: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20180809165047.GK13638@paquier.xyz
Backpatch-through: 11

Use wildcards, so one can add a TAP test suite without updating this
file.  Back-patch to v11, which omitted multiple new suites.

Back-patch to v11, where commit 90627cf9
made the GNU make build system do likewise.  Without this, when a
typical PostgresNode-using test failed, subsequent runs bailed out with
a "File exists" error.

Change the hint to recommend DROP PROCEDURE instead of FUNCTION.  Also
make the error message when changing the return type more specific to
the case of procedures.
Reported-by: Jeremy Evans <code@jeremyevans.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>

This para is obsolete, first because nobody is using Solaris 7 anymore,
and second because if someone was, configure should catch the snprintf
buffer overrun problem automatically (since commit 9bed827b), and third
because this is incorrect advice about how to manually force use of
snprintf.c anyway, and has been so at least since commit 3bc6bdf3.
The lack of complaints about it reinforces the conclusion that Solaris 7
no longer exists in the wild; so I don't feel a need to insert correct
advice instead.

Previously, this code blindly followed the common coding pattern of
passing PQserverVersion(AH->connection) as the server-version parameter
of fmtQualifiedId.  That works as long as we have a connection; but in
pg_restore with text output, we don't.  Instead we got a zero from
PQserverVersion, which fmtQualifiedId interpreted as "server is too old to
have schemas", and so the name went unqualified.  That still accidentally
managed to work in many cases, which is probably why this ancient bug went
undetected for so long.  It only became obvious in the wake of the changes
to force dump/restore to execute with restricted search_path.

In HEAD/v11, let's deal with this by ripping out fmtQualifiedId's server-
version behavioral dependency, and just making it schema-qualify all the
time.  We no longer support pg_dump from servers old enough to need the
ability to omit schema name, let alone restoring to them.  (Also, the few
callers outside pg_dump already didn't work with pre-schema servers.)

In older branches, that's not an acceptable solution, so instead just
tweak the DISABLE/ENABLE TRIGGER logic to ensure it will schema-qualify
its output regardless of server version.

Per bug #15338 from Oleg somebody.  Back-patch to all supported branches.

Discussion: https://postgr.es/m/153452458706.1316.5328079417086507743@wrigleys.postgresql.org

InsertPgAttributeTuple() is the interface between in-memory tuple
descriptors and on-disk pg_attribute, so it makes sense to give it the
job of resetting attcacheoff.  This avoids having all the callers having
to do so.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>

When executing a SubPlan in an expression, the EState's direction
field was left alone, resulting in an attempt to execute the subplan
backwards if it was encountered during a backwards scan of a cursor.
Also, though much less likely, it was possible to reach the execution
of an InitPlan while in backwards-scan state.

Repair by saving/restoring estate->es_direction and forcing forward
scan mode in the relevant places.

Backpatch all the way, since this has been broken since 8.3 (prior to
commit c7ff7663, SubPlans had their own EStates rather than sharing
the parent plan's, so there was no confusion over scan direction).

Per bug #15336 reported by Vladimir Baranoff; analysis and patch by
me, review by Tom Lane.

Discussion: https://postgr.es/m/153449812167.1304.1741624125628126322@wrigleys.postgresql.org

Since commit e1d19c90, buildfarm member gharial has been failing with
symptoms indicating that snprintf sometimes returns -1 for buffer
overrun, even though it passes the added configure check.  Some
google research suggests that this happens only in limited cases,
such as when the overrun happens partway through a %d item.  Adjust
the configure check to exercise it that way.  Since I'm now feeling
more paranoid than I was before, also make the test explicitly verify
that the buffer doesn't get physically overrun.

Commit 777e6ddf checked for a shut down
message from a standby and allowed it to continue.  This patch reports a
helpful error message in these cases, suggesting to use rsync as
documented.

Diagnosed-by: Martín Marqués

Discussion: https://postgr.es/m/CAPdiE1xYCow-reLjrhJ9DqrMu-ppNq0ChUUEvVdxhdjGRD5_eA@mail.gmail.com

Backpatch-through: 9.3

Author: Dian Fay
Discussion: https://postgr.es/m/745abbd2-a1a0-ead8-2cb2-768c16747d97@gmail.com
Backpatch-through: 9.3

Somebody accidentally a word.  Back-patch to 9.6.

Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20180816195431.GA23707%40telsasoft.com

unused since f2cc453d