Adopt the position that only locally-defined defaults matter.  Any defaults
defined in the remote database do not affect insertions performed through
a foreign table (unless they are for columns not known to the foreign
table).  While it'd arguably be more useful to permit remote defaults to be
used, making that work in a consistent fashion requires far more work than
seems possible for 9.3.

There's still some discussion about exactly how postgres_fdw ought to
handle this case, but there seems no debate that we want to allow defaults
to be used for inserts into foreign tables.  So remove the core-code
restrictions that prevented it.

While at it, get rid of the special grammar productions for CREATE FOREIGN
TABLE, and instead add explicit FEATURE_NOT_SUPPORTED error checks for the
disallowed cases.  This makes the grammar a shade smaller, and more
importantly results in much more intelligible error messages for
unsupported cases.  It's also one less thing to fix if we ever start
supporting constraints on foreign tables.

Apparently I lost some of the edits I had done on this page for commit
0ac5ad51.

Per note from Etsuro Fujita, although I didn't use his patch.

Make some of the wording in the affected section a bit more complete,
too.

A test intended to provoke an error on the remote side was coded in such
a way that multiple rows should be updated, so the output would vary
depending on which one was processed first.  Per buildfarm.

For datatypes whose output formatting depends on one or more GUC settings,
we have to worry about whether the other server will interpret the value
the same way it was meant.  pg_dump has been aware of this hazard for a
long time, but postgres_fdw needs to deal with it too.  To fix data
retrieval from the remote server, set the necessary remote GUC settings at
connection startup.  (We were already assuming that settings made then
would persist throughout the remote session.)  To fix data transmission to
the remote server, temporarily force the relevant GUCs to the right values
when we're about to convert any data values to text for transmission.

This is all pretty grotty, and not very cheap either.  It's tempting to
think of defining one uber-GUC that would override any settings that might
render printed data values unportable.  But of course, older remote servers
wouldn't know any such thing and would still need this logic.

While at it, revert commit f7951eef, since
this provides a real fix.  (The timestamptz given in the error message
returned from the "remote" server will now reliably be shown in UTC.)

"INSERT INTO foo() VALUES ()" is invalid syntax, so don't do that.

"break" instead of "continue" suppressed view expansion for views appearing
later in the range table.  Per report from Erikjan Rijkers.

While at it, improve the associated comment a bit.

This adds the following:

    json_agg(anyrecord) -> json
    to_json(any) -> json
    hstore_to_json(hstore) -> json (also used as a cast)
    hstore_to_json_loose(hstore) -> json

The last provides heuristic treatment of numbers and booleans.

Also, in json generation, if any non-builtin type has a cast to json,
that function is used instead of the type's output function.

Andrew Dunstan, reviewed by Steve Singer.

Catalog version bumped.

suggested by Tianyin Xu

We probably need to tell the remote server to use specific timezone and
datestyle settings, and maybe other things.  But for now let's just hack
the postgres_fdw regression test to not provoke failures when run in
non-EST5EDT environments.  Per buildfarm.

This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers.  There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.

KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.

Instead of just reporting which user failed to log in, log both the
line number in the active pg_hba.conf file (which may not match reality
in case the file has been edited and not reloaded) and the contents of
the matching line (which will always be correct), to make it easier
to debug incorrect pg_hba.conf files.

The message to the client remains unchanged and does not include this
information, to prevent leaking security sensitive information.

Reviewed by Tom Lane and Dean Rasheed

Alexander Korotkov, reviewed by Jeff Davis.

The libpgcommon patch made that unnecessary, palloc and friends are now
available in frontend programs too, mapped to plain old malloc.

As pointed out by Alvaro Herrera.

Fujii Masao

The previous coding of this function could get into situations where it
would never terminate, because successive passes would re-add EMPTY arcs
that had been removed by the previous pass.  Rewrite the function
completely using a new algorithm that is guaranteed to terminate, and
also seems to be usually faster than the old one.  Per Tcl bugs 3604074
and 3606683.

Tom Lane and Don Porter

If we were about to enter archive recovery after crash recovery, we scanned
the archive for the latest tli history file, and set the recovery target
timeline to that. However, when we actually tried to read the history file,
we would not fetch the file from the archive, because we were not in archive
recovery yet.

To fix, make readTimeLineHistory and existsTimeLineHistory to always fetch
the file from archive if archive recovery is requested, even if we're not in
archive recovery yet.

Backpatch to 9.2. Mitsumasa KONDO

This saves several catalog lookups per reference.  It's not all that
exciting right now, because we'd managed to minimize the number of places
that need to fetch the data; but the upcoming writable-foreign-tables patch
needs this info in a lot more places.

KaiGai Kohei

It needs parsenodes.h to be compilable regardless of previous headers.

This page with no tuples is used to distinguish an MV containing a
zero-row resultset of its backing query from an MV which has not
been populated by its backing query.  Unless WAL-logged, recovery
and hot standby don't work correctly with what should be an empty
but scannable materialized view.

Fixes bugs reported by Fujii Masao in testing MVs on hot standby.

Per report and suggestion from Bernd Helmle

This confused Cygwin's make because of the colon in the path. The
DLL isn't likely to change under us so preserving the dependency
doesn't gain us much, and it's useful to be able to do a native
Windows build with the Cygwin mingw toolset.

Noah Misch.

formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY').  Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I".  To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters.  Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate.  Per bug #7913 from Adnan Dursun.  Back-patch to all active
branches, since it's been like this for a long time.

I fixed this code back in commit 841b4a2d, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00.  Per report from Magnus Hagander.

reviewed by Satoshi Nagayasu

This was already the case for domains over arrays, but not for domains
over certain built-in types such as boolean.  The special formatting
rules for those types should apply to domains over them as well.
Per discussion.

While this is a bug fix, it's also a behavioral change that seems likely
to trip up some applications.  So no back-patch.

Pavel Stehule

A materialized view has a rule just like a view and a heap and
other physical properties like a table.  The rule is only used to
populate the table, references in queries refer to the
materialized data.

This is a minimal implementation, but should still be useful in
many cases.  Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed.  At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.

Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.

Also make sure other fields of the view's pg_class entry are appropriate
for a view; it shouldn't have relfrozenxid set for instance.

This ancient omission isn't believed to have any serious consequences in
versions 8.4-9.2, so no backpatch.  But let's fix it before it does bite
us in some serious way.  It's just luck that the case doesn't cause
problems for autovacuum.  (It did cause problems in 8.3, but that's out
of support.)

Andres Freund

fmgr_sql had been designed on the assumption that the FmgrInfo it's called
with has only query lifespan.  This is demonstrably unsafe in connection
with range types, as shown in bug #7881 from Andrew Gierth.  Fix things
so that we re-generate the function's cache data if the (sub)transaction
it was made in is no longer active.

Back-patch to 9.2.  This might be needed further back, but it's not clear
whether the case can realistically arise without range types, so for now
I'll desist from back-patching further.