Craig Ringer, Andres Freund, Christian Kruse, with edits by me.

This is fairly basic at the moment, but it's at least useful for
testing and debugging, and possibly more.

Andres Freund

The comment and the code diverged at some point before the initial
commit of this feature, and I failed to notice.

Noted by Tom Lane.

One path through the loop over indexes forgot to do index_close().  Rather
than adding a fourth call, restructure slightly so that there's only one.

In passing, get rid of an unnecessary syscache lookup: the pg_index struct
for the index is already available from its relcache entry.

Per report from YAMAMOTO Takashi, though this is a bit different from his
suggested patch.  This is new code in HEAD, so no need for back-patch.

Revise the original decision to expose a uint64-based interface and
use Size everywhere possible.  Avoid assuming that MAXIMUM_ALIGNOF is
8, or making any assumption about the relationship between that value
and sizeof(Size).  If MAXIMUM_ALIGNOF is bigger, we'll now insert
padding after the length word; if it's smaller, we are now prepared
to read and write the length word in chunks.

Per discussion with Tom Lane.

This used to work properly, but got fat-fingered in commit
3dee636e.  Per bug #9620 from
Nicolas Payart.

Add SLOTNAME placeholder to --slot option in help message and
document.

The new function dsm_detach_all() can be used either by postmaster
children that don't wish to take any risk of accidentally corrupting
shared memory; or by forked children of regular backends with
the same need.  This patch also updates the postmaster children that
already do PGSharedMemoryDetach() to do dsm_detach_all() as well.

Per discussion with Tom Lane.

The recently-fixed bug in WAL replay could result in not finding a parent
tuple for a heap-only tuple.  The existing code would either Assert or
generate an invalid index entry, neither of which is desirable.  Throw a
regular error instead.

While we're at it, also improve comments in ginlogic.c.

Thom Brown

On clean shutdown, walsender waits for all WAL to be replicated to a standby,
and exits. It determined whether that replication had been completed by
checking whether its sent location had been equal to a standby's flush
location. Unfortunately this condition never becomes true when the standby
such as pg_receivexlog which always returns an invalid flush location is
connecting to walsender, and then walsender waits forever.

This commit changes walsender so that it just checks a standby's write
location if a flush location is invalid.

Back-patch to 9.1 where enough infrastructure for this exists.

Michael Paquier

Backpatch all the way back to 9.1, where it was introduced by commit
50d89d42.

Reported by Sergey Burladyan in #9223
Author: Alex Hunsaker

I discovered the hard way that on some old shells, the locution
    FOO=""   unset FOO
does not behave the same as
    FOO="";  unset FOO
and in fact leaves FOO set to an empty string.  test.sh was inconsistently
spelling it different ways on adjacent lines.

This got broken relatively recently, in commit c737a2e5, so the lack of
field reports to date doesn't represent a lot of evidence that the problem
is rare.

"8" was correct back when "disable" was the longest allowed value, but
since "verify-full" was added, it should be "12".  Given the lack of
complaints, I wouldn't be surprised if nobody is actually using these
values ... but still, if they're in the API, they should be right.

Noticed while pursuing a different problem.  It's been wrong for quite
a long time, so back-patch to all supported branches.

krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.

In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.

Noted by Stephen Frost, though a different solution than his suggestion

As usual, the release notes for older branches will be made by cutting
these down, but put them up for community review first.

DST law changes in Fiji, Turkey; historical changes in Israel, Ukraine.

In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.

Problem
-------

We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):

ERROR:  failed to delete rightmost child 41 of block 3 in index "foo_pkey"

We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.

To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.

Solution
--------

This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.

This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.

This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.

Reviewed by Kevin Grittner and Peter Geoghegan.

This should eliminate the risk of recursive entry to syslog(3), which
appears to be the cause of the hang reported in bug #9551 from James
Morton.

Arguably, the real problem here is auth.c's willingness to turn on
ImmediateInterruptOK while executing fairly wide swaths of backend code.
We may well need to work at narrowing the code ranges in which the
authentication_timeout interrupt is enabled.  For the moment, though,
this is a cheap and reasonably noninvasive fix for a field-reported
failure; the other approach would be complex and not necessarily
bug-free itself.

Back-patch to all supported branches.

Previously, psql would print the "COPY nnn" command status only for COPY
commands executed server-side.  Now it will print that for frontend copies
too (including \copy).  However, we continue to suppress the command status
for COPY TO STDOUT, since in that case the copy data has been routed to the
same place that the command status would go, and there is a risk of the
status line being mistaken for another line of COPY data.  Doing that would
break existing scripts, and it doesn't seem worth the benefit --- this case
seems fairly analogous to SELECT, for which we also suppress the command
status.

Kumar Rajeev Rastogi, with substantial review by Amit Khandekar

Use TransactionIdIsInProgress, then TransactionIdDidCommit, to distinguish
whether a NOTIFY message's originating transaction is in progress,
committed, or aborted.  The previous coding could accept a message from a
transaction that was still in-progress according to the PGPROC array;
if the client were fast enough at starting a new transaction, it might fail
to see table rows added/updated by the message-sending transaction.  Which
of course would usually be the point of receiving the message.  We noted
this type of race condition long ago in tqual.c, but async.c overlooked it.

The race condition probably cannot occur unless there are multiple NOTIFY
senders in action, since an individual backend doesn't send NOTIFY signals
until well after it's done committing.  But if two senders commit in close
succession, it's certainly possible that we could see the second sender's
message within the race condition window while responding to the signal
from the first one.

Per bug #9557 from Marko Tiikkaja.  This patch is slightly more invasive
than what he proposed, since it removes the now-redundant
TransactionIdDidAbort call.

Back-patch to 9.0, where the current NOTIFY implementation was introduced.

Thom Brown

A few more

When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.

Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.

Also improve the comments a bit.

Christian Kruse, reviewed by Kumar Rajeev Rastogi.

Andres Freund

Also fix some nearby comments.

Andres Freund

Andres Freund, per complaints by Peter Eisentraut.

With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.

This commit includes a triConsistent function for the built-in array and
tsvector opclasses.

Alexander Korotkov, with some changes by me.

We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.

This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.

Reported by Noah Misch. Backpatch to all supported versions.

Commit 08146775 changed do_copy() to
temporarily scribble on pset.cur_cmd_source.  That was a mighty ugly bit of
code in any case, but in particular it broke handleCopyIn's ability to tell
whether it was reading from the current script source file (in which case
pset.lineno should be incremented for each line of COPY data), or from
someplace else (in which case it shouldn't).  The former case still worked,
the latter not so much.  The visible effect was that line numbers reported
for errors in a script file would be wrong if there were an earlier \copy
that was reading anything other than inline-in-the-script-file data.

To fix, introduce another pset field that holds the file do_copy wants the
COPY code to use.  This is a little bit ugly, but less so than passing the
file down explicitly through several layers that aren't COPY-specific.

Extracted from a larger patch by Kumar Rajeev Rastogi; that patch also
changes printing of COPY command tags, which is not a bug fix and shouldn't
get back-patched.  This particular idea was from a suggestion by Amit
Khandekar, if I'm reading the thread correctly.

Back-patch to 9.2 where the faulty code was introduced.

Amit Kapila, reviewed by Kyotaro Horiguchi, with some further
changes by me.

In order for this to work, walsenders need the optional ability to
connect to a database, so the "replication" keyword now allows true
or false, for backward-compatibility, and the new value "database"
(which causes the "dbname" parameter to be respected).

walsender needs to loop not only when idle but also when sending
decoded data to the user and when waiting for more xlog data to decode.
This means that there are now three separate loops inside walsender.c;
although some refactoring has been done here, this is still a bit ugly.

Andres Freund, with contributions from Álvaro Herrera, and further
review by me.