Rename some objects so that sorted output becomes less locale-dependent.

Reviewed-by: Michael Paquier <michael.paquier@gmail.com>

DST law changes in northern Cyprus (new zone Asia/Famagusta), Russia (new
zone Europe/Saratov), Tonga, Antarctica/Casey.  Historical corrections for
Asia/Aqtau, Asia/Atyrau, Asia/Gaza, Asia/Hebron, Italy, Malta.  Replace
invented zone abbreviation "TOT" for Tonga with numeric UTC offset; but
as in the past, we'll keep accepting "TOT" for input.

Peter Geoghegan

In commit 6c268df1, pg_init_privs was added to track the initial
privileges of catalog objects and extensions.  Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.

The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.

This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.

This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).

Back-patch to 9.6 where pg_init_privs was introduced.

The formatting of the perl hashes used in the TAP tests for test_pg_dump
was rather horribly inconsistent and made it more difficult than it
really should have been to add new tests or adjust what tests are for
what runs, etc.

Reformat to clean that all up.

Whitespace-only changes.

Etsuro Fujita

Currently, we only need this logic in order to cost a Bitmap Heap
Scan.  But a pending patch for Parallel Bitmap Heap Scan also uses
it to help figure out how many workers to use for the scan, which
has to be determined prior to costing.  So, move the logic to
a separate function to make that easier.

Dilip Kumar.  The patch series of which this is a part has been
reviewed by Andres Freund, Amit Khendekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, and me; it is not clear from the email
discussion which of those people have looked specifically at this
part.

Discussion: http://postgr.es/m/CAFiTN-v3QYNJEZnnmKCeATuLbN-h9tMVfeEF0+BrouYDqjXgwg@mail.gmail.com

tokenize_file() now returns a single list of TokenizedLine structs,
carrying the same information as before.  We were otherwise going to grow a
fourth list to deal with error messages, and that was getting a bit silly.

Haribabu Kommi, revised a bit by me

Discussion: https://postgr.es/m/CAJrrPGfbgbKsjYp=bgZXhMcgxoaGSoBb9fyjrDoOW_YymXv1Kw@mail.gmail.com

Per discussion with Craig Ringer.

Clean up hastily-composed comment.  Normalize whitespace.

Erik Rijkers and myself

When I wrote commit ab1f0c82, I really missed the castNode() macro that
Peter E. had proposed shortly before.  This back-fills the uses I would
have put it to.  It's probably not all that significant, but there are
more assertions here than there were before, and conceivably they will
help catch any bugs associated with those representation changes.

I left behind a number of usages like "(Query *) copyObject(query_var)".
Those could have been converted as well, but Peter has proposed another
notational improvement that would handle copyObject cases automatically,
so I let that be for now.

This is far from a pervasive conversion, but it's a good starting
point.

Author: Peter Eisentraut, with some minor changes by me
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com

The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid.  This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.

As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.

On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.

For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.

Author: Peter Eisentraut and Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-

Our current DDL only allows a database name to be specified in COMMENT
ON DATABASE, which Andrew Dunstan reports to make this test fail on the
buildfarm.  Remove the line until we gain a DDL command that allows the
current database to be operated on without having the specify it by
name.

Backpatch to 9.5, where these tests appeared.

Discussion: https://postgr.es/m/e6084b89-07a7-7e57-51ee-d7b8fc9ec864@2ndQuadrant.com

Even though these messages are not used yet, we should keep the list
complete.

The CREATE privilege on databases now also enables creating
publications.

We maintained two separate expected files because log_cnt could be one
of two values.  Rewrite the test so that we only need one file.
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>

Add test cases to object_address.sql to test the new logical replication
related object classes, and fix some small bugs discovered by that.

Hot_standby_feedback could be reset by reload and worked correctly, but if
the server was restarted rather than reloaded the xmin was not reset.
Force reset always if hot_standby_feedback is enabled at startup.

Ants Aasma, Craig Ringer

Reported-by: Ants Aasma

!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector.  ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer.  Remove the premature optimization.

Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.

Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.

Discussion: https://postgr.es/m/20170126025524.1434.97828@wrigleys.postgresql.org

This improves readability a bit and may make future improvements easier.

In passing, make sure that the JB_ROOT_IS_XXX macros deliver boolean (0/1)
results; the previous coding was a bug hazard, though no actual bugs are
known.

Nikita Glukhov, extended a bit by me

Discussion: https://postgr.es/m/9e21a39c-c1d7-b9b5-44a0-c5345a5029f6@postgrespro.ru

From: Erik Rijkers <er@xs4all.nl>

From: Petr Jelinek <pjmodos@pjmodos.net>

There's really no situation where we don't want these unknown-to-text
conversions to happen.  The alternative is failure anyway, and the one
caller that was passing "false" did so only because it expected the
case could not arise.  Might as well simplify the code.

Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com

Previously, type "unknown" was labeled as a base type in pg_type, which
perhaps had some sense to it because you were allowed to create tables with
unknown-type columns.  But now that we don't allow that, it makes more
sense to label it a pseudo-type.  This has the additional effects of
forbidding use of "unknown" as a domain base type, cast source or target
type, PL function argument or result type, or plpgsql local variable type;
all of which seem like good holes to plug.

Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com

Previously, we left such literals alone if the query or subquery had
no properties forcing a type decision to be made (such as an ORDER BY or
DISTINCT clause using that output column).  This meant that "unknown" could
be an exposed output column type, which has never been a great idea because
it could result in strange failures later on.  For example, an outer query
that tried to do any operations on an unknown-type subquery output would
generally fail with some weird error like "failed to find conversion
function from unknown to text" or "could not determine which collation to
use for string comparison".  Also, if the case occurred in a CREATE VIEW's
query then the view would have an unknown-type column, causing similar
failures in queries trying to use the view.

To fix, at the tail end of parse analysis of a query, forcibly convert any
remaining "unknown" literals in its SELECT or RETURNING list to type text.
However, provide a switch to suppress that, and use it in the cases of
SELECT inside a set operation or INSERT command.  In those cases we already
had type resolution rules that make use of context information from outside
the subquery proper, and we don't want to change that behavior.

Also, change creation of an unknown-type column in a relation from a
warning to a hard error.  The error should be unreachable now in CREATE
VIEW or CREATE MATVIEW, but it's still possible to explicitly say "unknown"
in CREATE TABLE or CREATE (composite) TYPE.  We want to forbid that because
it's nothing but a foot-gun.

This change creates a pg_upgrade failure case: a matview that contains an
unknown-type column can't be pg_upgraded, because reparsing the matview's
defining query will now decide that the column is of type text, which
doesn't match the cstring-like storage that the old materialized column
would actually have.  Add a checking pass to detect that.  While at it,
we can detect tables or composite types that would fail, essentially
for free.  Those would fail safely anyway later on, but we might as
well fail earlier.

This patch is by me, but it owes something to previous investigations
by Rahila Syed.  Also thanks to Ashutosh Bapat and Michael Paquier for
review.

Discussion: https://postgr.es/m/CAH2L28uwwbL9HUM-WR=hromW1Cvamkn7O-g8fPY2m=_7muJ0oA@mail.gmail.com

Update documentation to match change in
0bc1207a.

Commit 7012b132 added some tests that consumed an excessive amount of
time, more than tripling the time needed for "make installcheck" for this
module.  Add filter conditions to reduce the number of rows scanned,
bringing the runtime down to within hailing distance of what it was before.

Jeevan Chalke and Ashutosh Bapat, per a gripe from me

Discussion: https://postgr.es/m/16565.1478104765@sss.pgh.pa.us

According to the comments in tupconvert.c, it's necessary to perform
tuple conversion when either table has OIDs, and this was previously
checked by ensuring that the tdtypeid value matched between the tables
in question.  However, that's overly stringent: we have access to
tdhasoid and can test directly whether OIDs are present, which lets us
avoid conversion in cases where the type OIDs are different but the
tuple descriptors are entirely the same (and neither has OIDs).  This
is useful to the partitioning code, which can thereby avoid converting
tuples when inserting into a partition whose columns appear in the
same order as the parent columns, the normal case.  It's possible
for the tuple routing code to avoid some additional overhead in this
case as well, so do that, too.

It's not clear whether it would be OK to skip this when both tables
have OIDs: do callers count on this to build a new tuple (losing the
previous OID) in such instances?  Until we figure it out, leave the
behavior in that case alone.

Amit Langote, reviewed by me.

Commit 587cda35 added a test to updatable_views.sql that created
tables named the same as tables used by the concurrent inherit.sql
script.  Unsurprisingly, this results in random failures.
Pick different names.

Per buildfarm.

In the new code for selecting sequence data from pg_sequence, set the
schema to pg_catalog instead of the sequences own schema, and refer to
the sequence by OID instead of name, which was missing a schema
qualification.
Reported-by: Stephen Frost <sfrost@snowman.net>

Formerly an alternate password file could only be selected via the
environment variable PGPASSFILE; now it can also be selected via a
new connection parameter "passfile", corresponding to the conventions
for most other connection parameters.  There was some concern about
this creating a security weakness, but it was agreed that that argument
was pretty thin, and there are clear use-cases for handling password
files this way.

Julian Markwort, reviewed by Fabien Coelho, some adjustments by me

Discussion: https://postgr.es/m/a4b4f4f1-7b58-a0e8-5268-5f7db8e8ccaa@uni-muenster.de

This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.

Robert Haas and Beena Emerson.  (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)

Discussion: http://postgr.es/m/CA+TgmobNo4qz06wHEmy9DszAre3dYx-WNhHSCbU9SAwf+9Ft6g@mail.gmail.com