Commit 3e98c0ba added pg_backend_memory_contexts view to display
the memory contexts of the backend process. However its target process
is limited to the backend that is accessing to the view. So this is
not so convenient when investigating the local memory bloat of other
backend process. To improve this situation, this commit adds
pg_log_backend_memory_contexts() function that requests to log
the memory contexts of the specified backend process.

This information can be also collected by calling
MemoryContextStats(TopMemoryContext) via a debugger. But
this technique cannot be used in some environments because no debugger
is available there. So, pg_log_backend_memory_contexts() allows us to
see the memory contexts of specified backend more easily.

Only superusers are allowed to request to log the memory contexts
because allowing any users to issue this request at an unbounded rate
would cause lots of log messages and which can lead to denial of service.

On receipt of the request, at the next CHECK_FOR_INTERRUPTS(),
the target backend logs its memory contexts at LOG_SERVER_ONLY level,
so that these memory contexts will appear in the server log but not
be sent to the client. It logs one message per memory context.
Because if it buffers all memory contexts into StringInfo to log them
as one message, which may require the buffer to be enlarged very much
and lead to OOM error since there can be a large number of memory
contexts in a backend.

When a backend process is consuming huge memory, logging all its
memory contexts might overrun available disk space. To prevent this,
now this patch limits the number of child contexts to log per parent
to 100. As with MemoryContextStats(), it supposes that practical cases
where the log gets long will typically be huge numbers of siblings
under the same parent context; while the additional debugging value
from seeing details about individual siblings beyond 100 will not be large.

There was another proposed patch to add the function to return
the memory contexts of specified backend as the result sets,
instead of logging them, in the discussion. However that patch is
not included in this commit because it had several issues to address.

Thanks to Tatsuhito Kasahara, Andres Freund, Tom Lane, Tomas Vondra,
Michael Paquier, Kyotaro Horiguchi and Zhihong Yu for the discussion.

Bump catalog version.

Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Zhihong Yu, Fujii Masao
Discussion: https://postgr.es/m/0271f440ac77f2a4180e0e56ebd944d1@oss.nttdata.com

The recent refactoring done in c50624cd accidentally broke a portion of
the kerberos tests checking after a query, so add its functionality
back.  Some inactive SSL tests had their arguments in an incorrect
order, which would cause them to fail if they were to run.

Author: Jacob Champion
Discussion: https://postgr.es/m/4f5b0b3dc0b6fe9ae6a34886b4d4000f61eb567e.camel@vmware.com

The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().

Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.

Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com

Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.

Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com

This type of failure is similar to what has been fixed in c757a3da,
where an authentication failure combined with psql pushing a command
down its communication pipe causes a test failure.  This routine is
designed to fail, so sending a query has little sense anyway.

Per buildfarm members gaur and hoverfly, based on an analysis and fix
from Tom Lane.

Discussion: https://postgr.es/m/513200.1617634642@sss.pgh.pa.us

Commit 49f49def took entirely the wrong approach to fixing this issue.
Just allocate a local buffer access strategy in each individual worker
instead of trying to propagate state.  This state was never propagated
by parallel VACUUM in the first place.

It looks like the only reason that this worked following commit 40d964ec
was that it involved static global variables, which are initialized to 0
per the C standard.

A more comprehensive fix may be necessary, even on HEAD.  This fix
should at least get the buildfarm green once again.

Thanks once again to Thomas Munro for continued off-list assistance with
the issue.

Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap.  Otherwise it works about like included
columns in other index types.

Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me

Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com

Parallel VACUUM relied on global variable state from the leader process
being propagated to workers on fork().  Commit b4af70cb removed most
uses of global variables inside vacuumlazy.c, but did not account for
the buffer access strategy state.

To fix, propagate the state through shared memory instead.

Per buildfarm failures on elver, curculio, and morepork.

Many thanks to Thomas Munro for off-list assistance with this issue.

Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand.  Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead.  Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.

Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output.  We were using double, but that doesn't seem to have any
advantages.  Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap.  These assertions will be added in later
commits.

Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes.  Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.

Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com

A commonly requested use-case is to have a role who can run an
unfettered pg_dump without having to explicitly GRANT that user access
to all tables, schemas, et al, without that role being a superuser.
This address that by adding a "pg_read_all_data" role which implicitly
gives any member of this role SELECT rights on all tables, views and
sequences, and USAGE rights on all schemas.

As there may be cases where it's also useful to have a role who has
write access to all objects, pg_write_all_data is also introduced and
gives users implicit INSERT, UPDATE and DELETE rights on all tables,
views and sequences.

These roles can not be logged into directly but instead should be
GRANT'd to a role which is able to log in.  As noted in the
documentation, if RLS is being used then an administrator may (or may
not) wish to set BYPASSRLS on the login role which these predefined
roles are GRANT'd to.

Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/20200828003023.GU29590@tamriel.snowman.net

Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.

    TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"

This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.

Back-patch to all supported branches.

Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru

This mostly adds links to the glossary to the existing text, instead of
using <firstterm>.  Heikki left this out of 29ad6595 out of
stylistic concerns; these have since been addressed.

Author: Jürgen Purtz <juergen@purtz.de>
Discussion: https://postgr.es/m/67d7240f-8596-83fc-5e15-af06c128a0f5@purtz.de

Move the planner-control flags up so that there is more room for parse
options.  Some pending patches need some room there, so do this
renumbering separately so that there is less potential for conflicts.

Introduced by 51e225da.

Author: Anton Voloshin
Discussion: https://postgr.es/m/05477da0-703c-7de7-998c-5879738e8f39@postgrespro.ru

This commit refactors more TAP tests to adapt with the recent
introduction of connect_ok() and connect_fails() in PostgresNode,
introduced by 0d1a3343.  This changes the following test suites to use
the same code paths for connection checks:
- Kerberos
- LDAP
- SSL
- Authentication

Those routines are extended to be able to handle optional parameters
that are set depending on each suite's needs, as of:
- custom SQL query.
- expected stderr matching pattern.
- expected stdout matching pattern.
The new design is extensible with more parameters, and there are some
plans for those routines in the future with checks based on the contents
of the backend logs.

Author: Jacob Champion, Michael Paquier
Discussion: https://postgr.es/m/d17b919e27474abfa55d97786cb9cfadfe2b59e9.camel@vmware.com

spg_box_quad_leaf_consistent unconditionally returned the leaf
datum as leafValue, even though in its usage for poly_ops that
value is of completely the wrong type.

In versions before 12, that was harmless because the core code did
nothing with leafValue in non-index-only scans ... but since commit
2a636834, if we were doing a KNN-style scan, spgNewHeapItem would
unconditionally try to copy the value using the wrong datatype
parameters.  Said copying is a waste of time and space if we're not
going to return the data, but it accidentally failed to fail until
I fixed the datatype confusion in ac9099fc.

Hence, change spgNewHeapItem to not copy the datum unless we're
actually going to return it later.  This saves cycles and dodges
the question of whether lossy opclasses are returning the right
type.  Also change spg_box_quad_leaf_consistent to not return
data that might be of the wrong type, as insurance against
somebody introducing a similar bug into the core code in future.

It seems like a good idea to back-patch these two changes into
v12 and v13, although I'm afraid to change spgNewHeapItem's
mistaken idea of which datatype to use in those branches.

Per buildfarm results from ac9099fc.

Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us

According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed.  But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same.  But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.)  Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.

For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.

Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType.  It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.

Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.

Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us

When calling sort_expanded_ranges() we need to remember the return
value, because the function sorts and also deduplicates the ranges. So
the number of ranges may decrease. brin_minmax_multi_union failed to do
that, which resulted in crashes due to bogus ranges (equal minval/maxval
but not marked as compacted).

Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/20210404052550.GA4376%40ahch-to

The regression test for BRIN minmax-multi opclasses tested almost all
supported data types, with the exception of macaddr8. So this adds it.

The BRIN minmax-multi consistent function incorrectly assumed it can
lookup an operator, and then swap the arguments to get the commutator.
For example <(a,b) would be called as <(b,a) to get >(a,b). This works
when the arguments are of the same type, but with cross-type opclasses
this fails. We can't swap <(float4,float8) arguments, for example.

Fixed by passing arguments in the right order.

Discussion: https://postgr.es/m/CAJKUy5jLZFLCxyxfT%3DMfK5mtPfSzHA1rVLowR-j4RRsFVvKm7A%40mail.gmail.com

The distance calculation ignored the mask, unlike the inet comparator,
which resulted in negative distance in some cases. Fixed by applying the
mask in brin_minmax_multi_distance_inet. I've considered simply calling
inetmi() to calculate the delta, but that does not consider mask either.

Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/1a0a7b9d-9bda-e3a2-7fa4-88f15042a051%40enterprisedb.com

The distance calculation ignored the time zone, so the result of (b-a)
might have ended negative even if (b > a). Fixed by considering the time
zone difference.

Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5jLZFLCxyxfT%3DMfK5mtPfSzHA1rVLowR-j4RRsFVvKm7A%40mail.gmail.com

The distance calculation for interval type was treating months as having
31 days, which is inconsistent with the interval comparator (using 30
days). Due to this it was possible to get negative distance (b-a) when
(a<b), trigerring an assert.

Fixed by adopting the same logic as interval_cmp_value.

Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5jKH0Xhneau2mNftNPtTy-BVgQfXc8zQkEvRvBHfeUThQ%40mail.gmail.com

When editing the previous query buffer, if the editor is exited
without modifying the temp file then clear the query buffer,
rather than re-loading (and probably re-executing) the previous
query buffer.  This reduces the probability of accidentally
re-executing something you didn't intend to.

Similarly, in "\e file", if the file isn't actually modified
then don't load it into the query buffer.  And in "\ef" and
"\ev", if no changes are made then clear the query buffer
instead of loading the function or view definition into it.

Cases where we fail to invoke the editor at all, or it returns
a nonzero status, are treated like the no-file-modification case.

Laurenz Albe, reviewed by Jacob Champion

Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at

pgstat_report_wait_start() and pgstat_report_wait_end() required two
conditional branches so far. One to check if MyProc is NULL, the other to
check if pgstat_track_activities is set. As wait events are used around
comparatively lightweight operations, and are inlined (reducing branch
predictor effectiveness), that's not great.

The dependency on MyProc has a second disadvantage: Low-level subsystems, like
storage/file/fd.c, report wait events, but architecturally it is preferable
for them to not depend on inter-process subsystems like proc.h (defining
PGPROC).  After this change including pgstat.h (nor obviously its
sub-components like backend_status.h, wait_event.h, ...) does not pull in IPC
related headers anymore.

These goals, efficiency and abstraction, are achieved by having
pgstat_report_wait_start/end() not interact with MyProc, but instead a new
my_wait_event_info variable. At backend startup it points to a local variable,
removing the need to check for MyProc being NULL. During process
initialization my_wait_event_info is redirected to MyProc->wait_event_info. At
shutdown this is reversed. Because wait event reporting now does not need to
know about where the wait event is stored, it does not need to know about
PGPROC anymore.

The removal of the branch for checking pgstat_track_activities is simpler:
Don't check anymore. The cost due to the branch are often higher than the
store - and even if not, pgstat_track_activities is rarely disabled.

The main motivator to commit this work now is that removing the (indirect)
pgproc.h include from pgstat.h simplifies a patch to move statistics reporting
to shared memory (which still has a chance to get into 14).

Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de

Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b.

This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.

Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de

The TAP tests of src/test/ssl/ have been using rather generic matching
patterns to check some failure scenarios, like "SSL error" or just
"FATAL".  These have been introduced in 081bfc19.

Those messages are not wrong per se, but when working on the integration
of new SSL libraries it becomes hard to know if those errors are legit
or not, and existing scenarios may fail in incorrect ways.  This commit
makes all those messages more verbose by adding the information
generated by OpenSSL.  Fortunately, the same error messages are used for
all the versions supported on HEAD (checked that after running the tests
from 1.0.1 to 1.1.1), so the change is straight-forward.

Reported-by: Jacob Champion, Álvaro Herrera
Discussion: https://postgr.es/m/YGU3AxQh0zBMMW8m@paquier.xyz

Similarly to the cryptohash implementations, this refactors the existing
HMAC code into a single set of APIs that can be plugged with any crypto
libraries PostgreSQL is built with (only OpenSSL currently).  If there
is no such libraries, a fallback implementation is available.  Those new
APIs are designed similarly to the existing cryptohash layer, so there
is no real new design here, with the same logic around buffer bound
checks and memory handling.

HMAC has a dependency on cryptohashes, so all the cryptohash types
supported by cryptohash{_openssl}.c can be used with HMAC.  This
refactoring is an advantage mainly for SCRAM, that included its own
implementation of HMAC with SHA256 without relying on the existing
crypto libraries even if PostgreSQL was built with their support.

This code has been tested on Windows and Linux, with and without
OpenSSL, across all the versions supported on HEAD from 1.1.1 down to
1.0.1.  I have also checked that the implementations are working fine
using some sample results, a custom extension of my own, and doing
cross-checks across different major versions with SCRAM with the client
and the backend.

Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/X9m0nkEJEzIPXjeZ@paquier.xyz

An upcoming patch might remove the (now indirect) proc.h
include (which in turn includes other headers), and it's cleaner for
the modified files to include their dependencies directly anyway...

Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de

The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.

As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de

Testing if an unsigned variable is >= 0 is pretty pointless.

There's likely enough code in remove_cache_entry() to verify the cache
memory accounting is correct in assert enabled builds. These Asserts
were not adding much extra cover, even if they had been checking >= 0 on a
signed variable.

Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210402204734.6mo3nfacnljlicgn@alap3.anarazel.de

All other places already use MONTHS_PER_YEAR appropriately.

Backpatch-through: 9.6

Provide a new GUC check_client_connection_interval that can be used to
check whether the client connection has gone away, while running very
long queries.  It is disabled by default.

For now this uses a non-standard Linux extension (also adopted by at
least one other OS).  POLLRDHUP is not defined by POSIX, and other OSes
don't have a reliable way to know if a connection was closed without
actually trying to read or write.

In future we might consider trying to send a no-op/heartbeat message
instead, but that could require protocol changes.

Author: Sergey Cherkashin <s.cherkashin@postgrespro.ru>
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Konstantin Knizhnik <k.knizhnik@postgrespro.ru>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Maksim Milyutin <milyutinma@gmail.com>
Reviewed-by: Tsunakawa, Takayuki/綱川 貴之 <tsunakawa.takay@fujitsu.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (much earlier version)
Discussion: https://postgr.es/m/77def86b27e41f0efcba411460e929ae%40postgrespro.ru

Command-line options, or previous "ALTER (ROLE|DATABASE) ...
SET ROLE ..." commands, can change the value of the default role
for a session. In the presence of one of these, RESET ROLE will
change the current user identifier to the default role rather
than the session user identifier. Fix the documentation to
reflect this reality. Backpatch to all supported versions.

Author: Nathan Bossart
Reviewed-By: Laurenz Albe, David G. Johnston, Joe Conway
Reported by: Nathan Bossart
Discussion: https://postgr.es/m/flat/925134DB-8212-4F60-8AB1-B1231D750CB4%40amazon.com
Backpatch-through: 9.6

pg_checksums uses two counters, total size and current size,
to calculate the progress. Previously the progress that
pg_checksums reported could not reach 100% at the end.
The cause of this issue was that the sizes of only pages excluding
new ones in each file were counted as the current size
while the size of each file is counted as the total size.
That is, the total size of all new pages could be reported
as the difference between the total size and current size.

This commit fixes this issue by making pg_checksums count
the sizes of all pages including new ones in each file as
the current size.

Back-patch to v12 where progress reporting was added to pg_checksums.

Reported-by: Shinya Kato
Author: Shinya Kato
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB289656B1ACA0A5E7CAD07BE3C47A9@TYAPR01MB2896.jpnprd01.prod.outlook.com

Commit dd136052 established a policy that error message FILE items
should include only the base name of the reporting source file, for
uniformity and succinctness.  We now observe that some Windows compilers
use backslashes in __FILE__ strings, so truncate at backslashes as well.

This is expected to fix some platform variation in the results of the
new libpq_pipeline test module.

Discussion: https://postgr.es/m/3650140.1617372290@sss.pgh.pa.us

Per gripe from Daniel Gustafsson

This commit adds a new option keep_connections that controls
whether postgres_fdw keeps the connections to the foreign server open
so that the subsequent queries can re-use them. This option can only be
specified for a foreign server. The default is on. If set to off,
all connections to the foreign server will be discarded
at the end of transaction. Closed connections will be re-established
when they are necessary by future queries using a foreign table.

This option is useful, for example, when users want to prevent
the connections from eating up the foreign servers connections
capacity.

Author: Bharath Rupireddy
Reviewed-by: Alexey Kondratov, Vignesh C, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVvrp5=AVp2PupEm+nAC8S4buqR3fJMmaCoc7ftT0aD2A@mail.gmail.com

Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Discussion: https://www.postgresql.org/message-id/flat/7ea5ce773bbc4eea9ff1a381acd3b102@G08CNEXMBPEKD05.g08.fujitsu.local

The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.

To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.

Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com