The sequence name is no longer stored in the sequence relation, since
1753b1b0.

Commit 5f374fe7 attempted to turn the connect_timeout from an overall
maximum time limit into a per-host limit, but it didn't do a great job of
that.  The timer would only get restarted if we actually detected timeout
within connectDBComplete(), not if we changed our attention to a new host
for some other reason.  In that case the old timeout continued to run,
possibly causing a premature timeout failure for the new host.

Fix that, and also tweak the logic so that if we do get a timeout,
we advance to the next available IP address, not to the next host name.
There doesn't seem to be a good reason to assume that all the IP
addresses supplied for a given host name will necessarily fail the
same way as the current one.  Moreover, this conforms better to the
admittedly-vague documentation statement that the timeout is "per
connection attempt".  I changed that to "per host name or IP address"
to be clearer.  (Note that reconnections to the same server, such as for
switching protocol version or SSL status, don't get their own separate
timeout; that was true before and remains so.)

Also clarify documentation about the interpretation of connect_timeout
values less than 2.

This seems like a bug, so back-patch to v10 where this logic came in.

Tom Lane, reviewed by Fabien Coelho

Discussion: https://postgr.es/m/5735.1533828184@sss.pgh.pa.us

Commit dafa0848, added in 10, made the removal of temporary orphaned
tables more aggressive.  This commit makes an extra step into the
aggressiveness by adding a flag in each backend's MyProc which tracks
down any temporary namespace currently in use.  The flag is set when the
namespace gets created and can be reset if the temporary namespace has
been created in a transaction or sub-transaction which is aborted.  The
flag value assignment is assumed to be atomic, so this can be done in a
lock-less fashion like other flags already present in PGPROC like
databaseId or backendId, still the fact that the temporary namespace and
table created are still locked until the transaction creating those
commits acts as a barrier for other backends.

This new flag gets used by autovacuum to discard more aggressively
orphaned tables by additionally checking for the database a backend is
connected to as well as its temporary namespace in-use, removing
orphaned temporary relations even if a backend reuses the same slot as
one which created temporary relations in a past session.

The base idea of this patch comes from Robert Haas, has been written in
its first version by Tsunakawa Takayuki, then heavily reviewed by me.

Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8A4DC6@G01JPEXMBYT05
Backpatch: 11-, as PGPROC gains a new flag and we don't want silent ABI
breakages on already released versions.

After commits a315b967 and b805b63ac2, part of the comment atop
ExecShutdownNode is redundant.  Adjust it.

Author: Amit Kapila
Backpatch-through: 10 where both the mentioned commits are present.
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info

Currently, we release the asynchronous resources as soon as it is evident
that no more rows will be needed e.g. when a Limit is filled.  This can be
problematic especially for custom and foreign scans where we can scan
backward.  Fix that by disallowing the shutting down of resources in such
cases.

Reported-by: Robert Haas
Analysed-by: Robert Haas and Amit Kapila
Author: Amit Kapila
Reviewed-by: Robert Haas
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info

Multiple calls to XMLTABLE in a query (e.g. laterally applying it to a
table with an xml column, an important use-case) were leaking large
amounts of memory into the per-query context, blowing up memory usage.

Repair by reorganizing memory context usage in nodeTableFuncscan; use
the usual per-tuple context for row-by-row evaluations instead of
perValueCxt, and use the explicitly created context -- renamed from
perValueCxt to perTableCxt -- for arguments and state for each
individual table-generation operation.

Backpatch to PG10 where this code was introduced.

Original report by IRC user begriffs; analysis and patch by me.
Reviewed by Tom Lane and Pavel Stehule.

Discussion: https://postgr.es/m/153394403528.10284.7530399040974170549@wrigleys.postgresql.org

This reverts commit 3a60c8ff.  Buildfarm
results show that that caused a whole bunch of new warnings on platforms
where gcc believes the local printf to be non-POSIX-compliant.  This
problem outweighs the hypothetical-anyway possibility of getting warnings
for misuse of %m.  We could use gnu_printf archetype when we've substituted
src/port/snprintf.c, but that brings us right back to the problem of not
getting warnings for %m.

A possible answer is to attack it in the other direction by insisting
that %m support be included in printf's feature set, but that will take
more investigation.  In the meantime, revert the previous change, and
update the comment for PGAC_C_PRINTF_ARCHETYPE to more fully explain
what's going on.

Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us

The pump_nb() step might've already received the desired data, so we must
check for that at the top of the loop not the bottom.  Otherwise, the
call to pump() will sit with nothing to do until the timeout elapses.
pump_until then falls out with apparent success ... but the timeout has
been used up, causing the next call of pump_until to report a timeout
failure.  I believe this explains the intermittent timeout failures
we've seen in the buildfarm ever since this test went in.  I was able
to reproduce the problem on gaur semi-repeatably, and this appears to
fix it.

In passing, remove a duplicate assignment, fix one stdin-assignment to
look like the rest, and document the test's dependency on test_decoding.

When considering a partitioning parent rel, we should stop processing that
subroot as soon as we've done adjust_appendrel_attrs and any securityQuals
updates.  The rest of this is unnecessary, and indeed adding duplicate
subquery RTEs to the subroot is *wrong*.  As the code stood, the children
of that partition ended up with two sets of copied subquery RTEs, confusing
matters greatly.  Even more hilarity ensued if all of the children got
excluded by constraint exclusion, so that the extra RTEs didn't make it
back into the parent rtable.

Per fuzz testing by Andreas Seltenreich.  Back-patch to v11 where this
got broken (by commit 0a480502, it looks like).

Discussion: https://postgr.es/m/87va8g7vq0.fsf@ansel.ydns.eu

It's often unsafe to reference errno within an elog/ereport call, because
there are a lot of sub-functions involved and they might not all preserve
errno.  (This is why we support the %m format spec: it works off a value
of errno captured before we execute any potentially-unsafe functions in
the arguments.)  Therefore, we have a project policy not to use errno
there.

This patch adds a hack to cause an (admittedly obscure) compiler error
for such unsafe usages.  With the current code, the error will only be seen
on Linux, macOS, and FreeBSD, but that should certainly be enough to catch
mistakes in the buildfarm if they somehow get missed earlier.

In addition, fix some places in src/common/exec.c that trip the error.
I think these places are actually all safe, but it's simple enough to
avoid the error by capturing errno manually, and doing so is good
future-proofing in case these call sites get any more complicated.

Thomas Munro (exec.c fixes by me)

Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us

The elog/ereport family of functions certainly support the %m format spec,
because they implement it "by hand".  But elsewhere we have printf wrappers
that might or might not allow it depending on whether the platform's printf
does.  (Most non-glibc versions don't, and notably, src/port/snprintf.c
doesn't.)  Hence, rather than using the gnu_printf format archetype
interchangeably for all these functions, use it only for elog/ereport.
This will allow us to get compiler warnings for mistakes like the ones
fixed in commit a13b47a5, at least on platforms where printf doesn't
take %m and gcc is correctly configured to know it.  (Unfortunately,
that won't happen on Linux, nor on macOS according to my testing.
It remains to be seen what the buildfarm's gcc-on-Windows animals will
think of this, but we may well have to rely on less-popular platforms
to warn us about unportable code of this kind.)

Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us

These changes were put in at some stage of the development process, but
are unnecessary and should not have made it into the final patch. Mea
culpa.

Per gripe from Andreas Freund

Backpatch to REL_11_STABLE

Commit 9da0cc35, which introduced parallel CREATE INDEX, failed to
propagate relmapper.c backend local cache state to parallel worker
processes.  This could result in parallel index builds against mapped
catalog relations where the leader process (participating as a worker)
scans the new, pristine relfilenode, while worker processes scan the
obsolescent relfilenode.  When this happened, the final index structure
was typically not consistent with the owning table's structure.  The
final index structure could contain entries formed from both heap
relfilenodes.  Only rebuilds on mapped catalog relations that occur as
part of a VACUUM FULL or CLUSTER could become corrupt in practice, since
their mapped relation relfilenode swap is what allows the inconsistency
to arise.

On master, fix the problem by propagating the required relmapper.c
backend state as part of standard parallel initialization (Cf. commit
29d58fd3).  On v11, simply disallow builds against mapped catalog
relations by deeming them parallel unsafe.

Author: Peter Geoghegan
Reported-By: "death lock"
Reviewed-By: Tom Lane, Amit Kapila
Bug: #15309
Discussion: https://postgr.es/m/153329671686.1405.18298309097348420351@wrigleys.postgresql.org
Backpatch: 11-, where parallel CREATE INDEX was introduced.

Commit bcbd9408 didn't bother to fix up a comment it had falsified.

Also, const-ify choose_dsm_implementation(), since what it's returning
is always a constant string; pickier compilers would warn about this.

A caller of TRUNCATE could previously queue for an access exclusive lock
on a relation it may not have permission to truncate, potentially
interfering with users authorized to work on it.  This can be very
intrusive depending on the lock attempted to be taken.  For example,
pg_authid could be blocked, preventing any authentication attempt to
happen on a PostgreSQL instance.

This commit fixes the case of TRUNCATE so as RangeVarGetRelidExtended is
used with a callback doing the necessary ACL checks at an earlier stage,
avoiding lock queuing issues, so as an immediate failure happens for
unprivileged users instead of waiting on a lock that would not be
taken.

This is rather similar to the type of work done in cbe24a6d for CLUSTER,
and the code of TRUNCATE is this time refactored so as there is no
user-facing changes.  As the commit for CLUSTER, no back-patch is done.

Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180806165816.GA19883@paquier.xyz

Error message didn't match the actual check.  Fix that.  Compression of leaf
SP-GiST values was introduced in 11.  So, backpatch.

Discussion: https://postgr.es/m/20180810.100742.15469435.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi
Backpatch-through: 11

5262f7a4 have introduced parallel index scan.  In order to estimate the
number of parallel workers, it adds extra argument to amcostestimate() index
access method API function.  However, this extra argument was missed in the
documentation.  This commit fixes that.

Discussion: https://postgr.es/m/4128fdb4-8b63-2e05-38f6-3125f8c27263%40lab.ntt.co.jp
Author: Tatsuro Yamada, Alexander Korotkov
Backpatch-through: 10

Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD0Eii9y9f3cQV9AsaUF%3DMmOrQuZLHqoobFp%3DmSKEx1CA%40mail.gmail.com

Author: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://postgr.es/m/76d905d7-7eb7-4574-b6ec-a0ca3a1523c0@manitou-mail.org

Since commit 3b8f6e75, failure to do this would lead to
submake-generated-headers not doing anything, so that references to
generated or symlinked headers would fail.  Previous to that, the
omission only led to temp-install not doing anything, which apparently
affects many fewer people (doesn't anybody use "make check" in their
build rules??).  Hence, backpatch to v11 but not further.

Per complaints from Christoph Berg, Jakob Egger, and others.

If the first reference to $1 is "($1 = col) or ($1 is null)", the data
type can be determined, but not for "($1 is null) or ($1 = col)".  This
change documents this.

Reported-by: Morgan Owens

Discussion: https://postgr.es/m/153233728858.1404.15268121695358514937@wrigleys.postgresql.org

Backpatch-through: 9.3

I'm not sure which spelling is better, "partitionwise" or "partition-wise",
but everywhere else we spell it "partitionwise", so be consistent.

Tatsuro Yamada reported the one in README, I found the other one with grep.

Discussion: https://www.postgresql.org/message-id/d25ebf36-5a6d-8b2c-1ff3-d6f022a56000@lab.ntt.co.jp

A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to.  The same goes for a schema owner.  For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid.  This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.

Robert has worded most the documentation changes, and I have coded the
core part.

Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.

This Assert thought that a given rel couldn't be both leaf and
non-leaf, but it turns out that in some unusual plan trees
that's wrong, so remove it.

The lack of testing for cases like that is quite concerning ---
there is little reason for confidence that there aren't other
bugs in the area.  But developing a stable test case seems
rather difficult, and in any case we don't need this Assert.

David Rowley

Discussion: https://postgr.es/m/CAJGNTeOkdk=UVuMugmKL7M=owgt4nNr1wjxMg1F+mHsXyLCzFA@mail.gmail.com

The amcheck documentation incorrectly claimed that its example query
verifies every catalog index in the database.  In fact, the query only
verifies the 10 largest indexes (as determined by pg_class.relpages).
Adjust the description accordingly.

Backpatch: 10-, where contrib/amcheck was introduced.

GNUmakefile.in defined a macro "garbage" that seems to have been meant
as a suitable target for automatic "rm -rf" treatment, but it isn't
actually used anywhere (and indeed never was, AFAICT).

Moreover, we have concluded that the Makefiles shouldn't take it upon
themselves to remove files that aren't expected by-products of building,
so that doing anything like that would be against project policy anyway.
Hence, just remove the macro.

Grepping around finds another violation of that policy in ecpg/preproc,
so clean that up too.

Daniel Gustafsson (ecpg change by me)

Discussion: https://postgr.es/m/AFBEF63E-E19D-4EBB-9F08-4617CDC751ED@yesql.se

exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.

The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.

Backpatch to 9.3 (all supported versions).

Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com

Commit 1c2cb274 added some code that tried to detect whether two
RelOptInfos were the "same" rel by pointer comparison; but it turns
out that inheritance_planner breaks that, through its shenanigans
with copying some relations forward into new subproblems.  Compare
relid sets instead.  Add a regression test case to exercise this
area.

Problem reported by Rushabh Lathia; diagnosis and fix by Amit Langote,
modified a bit by me.

Discussion: https://postgr.es/m/CAGPqQf3anJGj65bqAQ9edDr8gF7qig6_avRgwMT9MsZ19COUPw@mail.gmail.com

CreateUserMapping has a recordDependencyOnCurrentExtension call that's
been there since extensions were introduced (very possibly my fault).
However, there's no support anywhere else for user mappings as members
of extensions, nor are they listed as a possible member object type in
the documentation.  Nor does it really seem like a good idea for user
mappings to belong to extensions when roles don't.  Hence, remove the
bogus call.

(As we saw in bug #15310, the lack of any pg_dump support for this case
ensures that any such membership record would silently disappear during
pg_upgrade.  So there's probably no need for us to do anything else
about cleaning up after this mistake.)

Discussion: https://postgr.es/m/27952.1533667213@sss.pgh.pa.us

Since commit c8e8b5a6, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use.  Still,
it's bogus, so fix it.

Reported by Petru-Florin Mihancea (bug #15312)

Discussion: https://postgr.es/m/153363913073.1303.6518849192351268091@wrigleys.postgresql.org

pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions.  It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes.  Back-patch to 9.3
where event triggers were introduced.

Haribabu Kommi

Discussion: https://postgr.es/m/153360083872.1395.4593932457718151600@wrigleys.postgresql.org

The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't.  But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results.  That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.

This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort.  Still, it's a bug, so back-patch.

Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.

Discussion: https://postgr.es/m/CABAq_6Hw+V-Kj7PNfD5tgOaWT_-qaYkc+SRmJkPLeUjYXLdxwQ@mail.gmail.com

Security: CVE-2018-10915, CVE-2018-10925

The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt.  If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.

While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result.  This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.

Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one.  Those are certainly bugs but
it's harder to paint them as security problems in themselves.  However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks.  The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.

These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.

Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.

Tom Lane, reviewed by Noah Misch.  Our thanks to Andrew Krasichkov
for finding and reporting the problem.

Security: CVE-2018-10915

The bytea variant takes (bytea, bytea, text).
Per unsigned report.

Discussion: https://postgr.es/m/153344327294.1404.654155870612982042@wrigleys.postgresql.org

I removed the code that used this in the previous commit.

Spotted by Michael Paquier.

There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.

This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.

This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.

I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.

Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.

In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.

Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi

Remove description of commit 1944cdc9, which has now been back-patched
so it's not relevant to v11 any longer.  Add descriptions of other
recent commits that seemed worth mentioning.

I marked the update as stopping at 2018-07-30, because it's unclear
whether d06eebce5 will be allowed to stay in v11, and I didn't feel like
putting effort into writing a description of it yet.  If it does stay,
I think it will deserve mention in the Source Code section.

When expanding an updatable view that is an INSERT's target, the rewriter
failed to rewrite Vars in the ON CONFLICT UPDATE clause.  This accidentally
worked if the view was just "SELECT * FROM ...", as the transformation
would be a no-op in that case.  With more complicated view targetlists,
this omission would often lead to "attribute ... has the wrong type" errors
or even crashes, as reported by Mario De Frutos Dieguez.

Fix by adding code to rewriteTargetView to fix up the data structure
correctly.  The easiest way to update the exclRelTlist list is to rebuild
it from scratch looking at the new target relation, so factor the code
for that out of transformOnConflictClause to make it sharable.

In passing, avoid duplicate permissions checks against the EXCLUDED
pseudo-relation, and prevent useless view expansion of that relation's
dummy RTE.  The latter is only known to happen (after this patch) in cases
where the query would fail later due to not having any INSTEAD OF triggers
for the view.  But by exactly that token, it would create an unintended
and very poorly tested state of the query data structure, so it seems like
a good idea to prevent it from happening at all.

This has been broken since ON CONFLICT was introduced, so back-patch
to 9.5.

Dean Rasheed, based on an earlier patch by Amit Langote;
comment-kibitzing and back-patching by me

Discussion: https://postgr.es/m/CAFYwGJ0xfzy8jaK80hVN2eUWr6huce0RU8AgU04MGD00igqkTg@mail.gmail.com