All related functions were already so marked.

Noted by Peter Geoghegan.

This seems more consistent with the pre-existing choices for names of
other statistics columns.  Rename assorted internal identifiers to match.

This spelling seems significantly more readable to me.

Get rid of the per-column documentation of underlying functions, which did
far more to clutter the view descriptions than it did to be helpful, and
was rather incomplete and typo-ridden anyway.  Instead suggest that people
consult the definitions of the standard views to see the underlying
functions.

The older functions for obtaining individual facts about backends are now
somewhat obsoleted by pg_stat_get_activity, which means that they are not
documented by any standard view.  So I put that information into a separate
table.  (Maybe we should just deprecate them instead?)

In passing, fix a couple more documentation errors.

In ancient times, it was thought that this wouldn't work because of
TrapMacro/AssertMacro, but changing those to use a comma operator
appears to work without compiler warnings.

Instead of writing out the .c -> .o rule, use the default one, so that
dependency tracking can be used.

Fix a bunch of typos, improve markup, make wording more uniform, rearrange
some material.  No substantive changes.

Display total time and I/O timings in milliseconds, for consistency with
the units used for timings in the core statistics views.  The columns
remain of float8 type, so that sub-msec precision is available.  (At some
point we will probably want to convert the core views to use float8 type
for the same reason, but this patch does not touch that issue.)

This is a release-note-requiring change in the meaning of the total_time
column.  The I/O timing columns are new as of 9.2, so there is no
compatibility impact from redefining them.

Do some minor copy-editing in the documentation, too.

This oversight caused the reported times to accumulate in an O(N^2)
fashion the longer a backend runs.

Normally whole-row Vars are printed as "tabname.*".  However, that does not
work at top level of a targetlist, because per SQL standard the parser will
think that the "*" should result in column-by-column expansion; which is
not at all what a whole-row Var implies.  We used to just print the table
name in such cases, which works most of the time; but it fails if the table
name matches a column name available anywhere in the FROM clause.  This
could lead for instance to a view being interpreted differently after dump
and reload.  Adding parentheses doesn't fix it, but there is a reasonably
simple kluge we can use instead: attach a no-op cast, so that the "*" isn't
syntactically at top level anymore.  This makes the printing of such
whole-row Vars a lot more consistent with other Vars, and may indeed fix
more cases than just the reported one; I'm suspicious that cases involving
schema qualification probably didn't work properly before, either.

Per bug report and fix proposal from Abbas Butt, though this patch is quite
different in detail from his.

Back-patch to all supported versions.

	--details-after
	--master-only
	--oldest-first

If it fails to open a new log file, the syslogger assumes there's something
wrong with its parameters (such as log_directory), and stops attempting
automatic time-based or size-based log file rotations.  Sending it SIGHUP
is supposed to start that up again.  However, the original coding for that
was really bogus, involving clobbering a couple of GUC variables and hoping
that SIGHUP processing would restore them.  Get rid of that technique in
favor of maintaining a separate flag showing we've turned rotation off.
Per report from Mark Kirkwood.

Also, the syslogger will automatically attempt to create the log_directory
directory if it doesn't exist, but that was only happening at startup.
For consistency and ease of use, it should do the same whenever the value
of log_directory is changed by SIGHUP.

Back-patch to all supported branches.

The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page.  We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.

Get rid of section 8.5.6 (Date/Time Internals), which appears to confuse
people more than it helps, and anyway discussion of Postgres' internal
datetime calculation methods seems pretty out of place here.  Instead,
make datatype.sgml just say that we follow the Gregorian calendar (a bit
of specification not previously present anywhere in that chapter :-()
and link to the History of Units appendix for more info.  Do some mild
editorialization on that appendix, too, to make it clearer that we are
following proleptic Gregorian calendar rules rather than anything more
historically accurate.

Per a question from Florence Cousin and subsequent discussion in
pgsql-docs.

bitmap_scan_cost_est() has to be able to cope with a BitmapOrPath, but
I'd taken a shortcut that didn't work for that case.  Noted by Heikki.
Add some regression tests since this area is evidently under-covered.

Before 9.1, PL/Python functions returning composite types could return
a string and it would be parsed using record_in.  The 9.1 changes made
PL/Python only expect dictionaries, tuples, or objects supporting
getattr as output of composite functions, resulting in a regression
and a confusing error message, as the strings were interpreted as
sequences and the code for transforming lists to database tuples was
used.  Fix this by treating strings separately as before, before
checking for the other types.

The reason why it's important to support string to database tuple
conversion is that trigger functions on tables with composite columns
get the composite row passed in as a string (from record_out).
Without supporting converting this back using record_in, this makes it
impossible to implement pass-through behavior for these columns, as
PL/Python no longer accepts strings for composite values.

A better solution would be to fix the code that transforms composite
inputs into Python objects to produce dictionaries that would then be
correctly interpreted by the Python->PostgreSQL counterpart code.  But
that would be too invasive to backpatch to 9.1, and it is too late in
the 9.2 cycle to attempt it.  It should be revisited in the future,
though.

Reported as bug #6559 by Kirill Simonov.

Jan Urbański

Add/complete support for:

- ALTER DOMAIN / VALIDATE CONSTRAINT
- ALTER DOMAIN / RENAME
- ALTER DOMAIN / RENAME CONSTRAINT
- ALTER TABLE / RENAME CONSTRAINT

We have been seeing intermittent buildfarm failures due to a query
sometimes not using an index-only scan plan, because a background
auto-ANALYZE prevented the table's all-visible bits from being set
immediately, thereby causing the estimated cost of an index-only scan
to go up considerably.  Adjust the test case so that a bitmap index scan is
preferred instead, which serves equally well for the purpose the test case
is actually meant for.  (Of course, it would be better to eliminate the
interference from auto-ANALYZE, but I see no low-risk way to do that,
so any such fix will have to be left for 9.3 or later.)

setrefs.c failed to do "rtoffset" adjustment of Vars in RETURNING lists,
which meant they were left with the wrong varnos when the RETURNING list
was in a subquery.  That was never possible before writable CTEs, of
course, but now it's broken.  The executor fails to notice any problem
because ExecEvalVar just references the ecxt_scantuple for any normal
varno; but EXPLAIN breaks when the varno is wrong, as illustrated in a
recent complaint from Bartosz Dmytrak.

Since the eventual rtoffset of the subquery is not known at the time
we are preparing its plan node, the previous scheme of executing
set_returning_clause_references() at that time cannot handle this
adjustment.  Fortunately, it turns out that we don't really need to do it
that way, because all the needed information is available during normal
setrefs.c execution; we just have to dig it out of the ModifyTable node.
So, do that, and get rid of the kluge of early setrefs processing of
RETURNING lists.  (This is a little bit of a cheat in the case of inherited
UPDATE/DELETE, because we are not passing a "root" struct that corresponds
exactly to what the subplan was built with.  But that doesn't matter, and
anyway this is less ugly than early setrefs processing was.)

Back-patch to 9.1, where the problem became possible to hit.

Due to rather sloppy thinking (on my part, I'm afraid) about the
appropriate behavior for boundary conditions, pg_next_dst_boundary() gave
undefined, platform-dependent results when the input time is exactly the
last recorded DST transition time for the specified time zone, as a result
of fetching values one past the end of its data arrays.

Change its specification to be that it always finds the next DST boundary
*after* the input time, and adjust code to match that.  The sole existing
caller, DetermineTimeZoneOffset, doesn't actually care about this
distinction, since it always uses a probe time earlier than the instant
that it does care about.  So it seemed best to me to change the API to make
the result=1 and result=0 cases more consistent, specifically to ensure
that the "before" outputs always describe the state at the given time,
rather than hacking the code to obey the previous API comment exactly.

Per bug #6605 from Sergey Burladyan.  Back-patch to all supported versions.

Predominant standard is two spaces, so adjust outliers to that.

A few simplifications and stylistic improvements, found while grepping
around for makefile problems elsewhere.

Prohibiting this outright would break dumps taken from older versions
that contain such casts, which would create far more pain than is
justified here.

Per report by Jaime Casanova and subsequent discussion.

Noted by Guillaume Smet.

Josh Kupershmidt

We must set the visibility map bit before releasing our exclusive lock
on the heap page; otherwise, someone might clear the heap page bit
before we set the visibility map bit, leading to a situation where the
visibility map thinks the page is all-visible but it's really not.

This problem has existed since 8.4, but it wasn't critical before we
had index-only scans, since the worst case scenario was that the page
wouldn't get vacuumed until the next scan_all vacuum.

Along the way, a couple of minor, related improvements: (1) if we
pause the heap scan to do an index vac cycle, release any visibility
map page we're holding, since really long-running pins are not good
for a variety of reasons; and (2) warn if we see a page that's marked
all-visible in the visibility map but not on the page level, since
that should never happen any more (it was allowed in previous
releases, but not in 9.2).

The size is only a hint, but a big hint chews up a lot of memory without
apparently improving performance much.

Analysis and patch by Noah Misch.

Fix typo spotted by Thom Brown, and improve wording in another area
where Thom spotted a typo.

Josh Kupershmidt

Instead of an exact cost comparison, use a fuzzy comparison with 1e-10
delta after all other path metrics have proved equal.  This is to avoid
having platform-specific roundoff behaviors determine the choice when
two paths are really the same to our cost estimators.  Adjust the
recently-added test case that made it obvious we had a problem here.

The original syntax wasn't universally loved, and it didn't allow its
usage in CREATE TABLE, only ALTER TABLE.  It now works everywhere, and
it also allows using ALTER TABLE ONLY to add an uninherited CHECK
constraint, per discussion.

The pg_constraint column has accordingly been renamed connoinherit.

This commit partly reverts some of the changes in
61d81bd2, particularly some pg_dump and
psql bits, because now pg_get_constraintdef includes the necessary NO
INHERIT within the constraint definition.

Author: Nikhil Sontakke
Some tweaks by me

For an initial relation that lacks any join clauses (that is, it has to be
cartesian-product-joined to the rest of the query), we considered only
cartesian joins with initial rels appearing later in the initial-relations
list.  This creates an undesirable dependency on FROM-list order.  We would
never fail to find a plan, but perhaps we might not find the best available
plan.  Noted while discussing the logic with Amit Kapila.

Improve the comments a bit in this area, too.

Arguably this is a bug fix, but given the lack of complaints from the
field I'll refrain from back-patching.

This patch adjusts the treatment of parameterized paths so that all paths
with the same parameterization (same set of required outer rels) for the
same relation will have the same rowcount estimate.  We cache the rowcount
estimates to ensure that property, and hopefully save a few cycles too.
Doing this makes it practical for add_path_precheck to operate without
a rowcount estimate: it need only assume that paths with different
parameterizations never dominate each other, which is close enough to
true anyway for coarse filtering, because normally a more-parameterized
path should yield fewer rows thanks to having more join clauses to apply.

In add_path, we do the full nine yards of comparing rowcount estimates
along with everything else, so that we can discard parameterized paths that
don't actually have an advantage.  This fixes some issues I'd found with
add_path rejecting parameterized paths on the grounds that they were more
expensive than not-parameterized ones, even though they yielded many fewer
rows and hence would be cheaper once subsequent joining was considered.

To make the same-rowcounts assumption valid, we have to require that any
parameterized path enforce *all* join clauses that could be obtained from
the particular set of outer rels, even if not all of them are useful for
indexing.  This is required at both base scans and joins.  It's a good
thing anyway since the net impact is that join quals are checked at the
lowest practical level in the join tree.  Hence, discard the original
rather ad-hoc mechanism for choosing parameterization joinquals, and build
a better one that has a more principled rule for when clauses can be moved.
The original rule was actually buggy anyway for lack of knowledge about
which relations are part of an outer join's outer side; getting this right
requires adding an outer_relids field to RestrictInfo.