code was already okay with this, but the hack that obtained the output
column types of a recursive union in advance of doing real parse analysis
of the recursive union forgot to handle the case where there was an inner
WITH clause available to the non-recursive term.  Best fix seems to be to
refactor so that we don't need the "throwaway" parse analysis step at all.
Instead, teach the transformSetOperationStmt code to set up the CTE's output
column information after it's processed the non-recursive term normally.
Per report from David Fetter.

perl_embed_ldflags setting.  On OS X it seems that ExtUtils::Embed is
trying to force a universal binary to be built, but you need to specify
that a lot further upstream if you want Postgres built that way; the only
result of including -arch in perl_embed_ldflags is some warnings at the
plperl.so link step.  Per my complaint and Jan Otto's suggestion.

build actually attempts to advertise itself via Bonjour.  Formerly it always
did so, which meant that packagers had to decide for their users whether
this behavior was wanted or not.  The default is "off" to be on the safe
side, though this represents a change in the default behavior of a
Bonjour-enabled build.  Per discussion.

with the not-so-deprecated DNSServiceRegister.  This patch shouldn't change
any user-visible behavior, it just gets rid of a deprecation warning in
--with-bonjour builds.  The new code will fail on OS X releases before 10.3,
but it seems unlikely that anyone will want to run Postgres 8.5 on 10.2.

It seems the flex developers have decided to change yyleng from int to size_t.
This has already happened in the latest release of OS X, and will start
happening elsewhere once the next release of flex appears.  Rather than trying
to divine how it's declared in any particular build, let's just remove the one
existing not-very-necessary external usage.

Back-patch to all supported branches; not so much because users in the field
are likely to care about building old branches with cutting-edge flex, as
to keep OSX-based buildfarm members from having problems with old branches.

IPV6 headers in newer SDKs.

to the Default timezone abbreviation set.

Back-port the the current file set to all branches that contain tznames.
This includes adding SGT to the Default set in pre-8.4 releases.

Joachim Wieland

Per a complaint from Gordon Shannon.

of why it's not as broken as it appears on first glance.

Formerly, these message types would be discarded unless there was already
a stats hash table entry for the target table.  However, the intent of
saving hash table space for unused tables was subverted by the fact that
the physical I/O done by the vacuum or analyze would result in an immediately
following tabstat message, which would create the hash table entry anyway.
All that we had left was surprising loss of statistical data, as in a recent
complaint from Jaime Casanova.

It seems unlikely that a real database would have many tables that go totally
untouched over the long haul, so the consensus is that this "optimization"
serves little purpose anyhow.  Remove it, and just create the hash table
entry on demand in all cases.

input functions don't accept either. While the backend can handle such
values fine, they can cause trouble in clients and in pg_dump/restore.

This is followup to the original issue on time datatype reported by Andrew
McNamara a while ago. Like that one, none of these seem worth
back-patching.

specify an encoding explicitly, we used to treat it as being in database
encoding when we parsed it, but then perform a UTF-8 -> database encoding
conversion on it, which was completely bogus. It's now consistently treated as
UTF-8.

7.4.26.

to unload and re-load the library.

The difficulty with unloading a library is that we haven't defined safe
protocols for doing so.  In particular, there's no safe mechanism for
getting out of a "hook" function pointer unless libraries are unloaded
in reverse order of loading.  And there's no mechanism at all for undefining
a custom GUC variable, so GUC would be left with a pointer to an old value
that might or might not still be valid, and very possibly wouldn't be in
the same place anymore.

While the unload and reload behavior had some usefulness in easing
development of new loadable libraries, it's of no use whatever to normal
users, so just disabling it isn't giving up that much.  Someday we might
care to expend the effort to develop safe unload protocols; but even if
we did, there'd be little certainty that every third-party loadable module
was following them, so some security restrictions would still be needed.

Back-patch to 8.2; before that, LOAD was superuser-only anyway.

Security: unprivileged users could crash backend.  CVE not assigned yet

functions.

This extends the previous patch that forbade SETting these variables inside
security-definer functions.  RESET is equally a security hole, since it
would allow regaining privileges of the caller; furthermore it can trigger
Assert failures and perhaps other internal errors, since the code is not
expecting these variables to change in such contexts.  The previous patch
did not cover this case because assign hooks don't really have enough
information, so move the responsibility for preventing this into guc.c.

Problem discovered by Heikki Linnakangas.

Security: no CVE assigned yet, extends CVE-2007-6600

to occur for division by zero, even though the code is carefully avoiding
that.  All available evidence is that the only functions affected are
int24div, int48div, and int28div, so patch just those three functions to
include a "return" after the ereport() call.

Backpatch to 8.4 so that the fix can be tested in production builds.
For older branches our recommendation will continue to be to use -O1
on affected platforms (which are mostly non-mainstream anyway).

Egypt, Mauritius, Bangladesh.

flat password file, because it never will anymore.  We had managed to
miss this during the recent flat-file-ectomy because it only happens if
--pwfile or --pwprompt is specified to initdb.  Apparently, few hackers
use those.  Reported by Erik Rijkers.

that's generated for a whole-row Var referencing the subquery, when the
subquery is in the nullable side of an outer join.  The previous coding
instead put PlaceHolderVars around the elements of the RowExpr.  The effect
was that when the outer join made the subquery outputs go to null, the
whole-row Var produced ROW(NULL,NULL,...) rather than just NULL.  There
are arguments afoot about whether those things ought to be semantically
indistinguishable, but for the moment they are not entirely so, and the
planner needs to take care that its machinations preserve the difference.
Per bug #5025.

Making this feasible required refactoring ResolveNew() to allow more caller
control over what is substituted for a Var.  I chose to make ResolveNew()
a wrapper around a new general-purpose function replace_rte_variables().
I also fixed the ancient bogosity that ResolveNew might fail to set
a query's hasSubLinks field after inserting a SubLink in it.  Although
all current callers make sure that happens anyway, we've had bugs of that
sort before, and it seemed like a good time to install a proper solution.

Back-patch to 8.4.  The problem can be demonstrated clear back to 8.0,
but the fix would be too invasive in earlier branches; not to mention
that people may be depending on the subtly-incorrect behavior.  The
8.4 series is new enough that fixing this probably won't cause complaints,
but it might in older branches.  Also, 8.4 shows the incorrect behavior
in more cases than older branches do, because it is able to flatten
subqueries in more cases.

(could happen if either postgresql.conf or postmaster.opts is empty).
It's been broken since the C version was written for 8.0, so patch
all the way back.

initdb's copy of the function is broken in the same way, but it's
less important there since the input files should never be empty.
Patch that in HEAD only, and also fix some cosmetic differences that
crept into that copy of the function.

Per report from Corry Haines and Jeff Davis.

own database's datfrozenxid, if the current value is old enough to be
forcing autovacuums or warning messages.  This ensures that a bogus
value is replaced as soon as possible.  Per a comment from Heikki.

because of readjustment of 2PC rmgr IDs for flatfile removal.

declaration.

Recent commits have removed the various uses it was supporting.  It was a
performance bottleneck, according to bug report #4919 by Lauris Ulmanis; seems
it slowed down user creation after a billion users.

to fix the problem that SetClientEncoding needs to be done before
InitializeClientEncoding, as reported by Zdenek Kotala.  We get at least
the small consolation of being able to remove the bizarre API detail that
had InitPostgres returning whether user is a superuser.

via the "flat files" facility.  This requires making it enough like a backend
to be able to run transactions; it's no longer an "auxiliary process" but
more like the autovacuum worker processes.  Also, its signal handling has
to be brought into line with backends/workers.  In particular, since it
now has to handle procsignal.c processing, the special autovac-launcher-only
signal conditions are moved to SIGUSR2.

Alvaro, with some cleanup from Tom

XID) in checkpoint records.  This eliminates the need to recompute the value
from scratch during database startup, which is one of the two remaining
reasons for the flatfile code to exist.  It should also simplify life for
hot-standby operation.

To avoid bloating the checkpoint records unreasonably, I switched from
tracking the oldest database by name to tracking it by OID.  This turns
out to save cycles in general (everywhere but the warning-generating
paths, which we hardly care about) and also helps us deal with the case
that the oldest database got dropped instead of being vacuumed.  The prior
coding might go for a long time without updating the wrap limit in that case,
which is bad because it might result in a lot of useless autovacuum activity.

from clang static checker, and makes the code more readable anyway IMO.

One of these represents a nontrivial bug (a promptly-leaked palloc), so
backpatch.

Greg Stark

(That flat file is now completely useless, but removal will come later.)

To do this, postpone client authentication into the startup transaction
that's run by InitPostgres.  We still collect the startup packet and do
SSL initialization (if needed) at the same time we did before.  The
AuthenticationTimeout is applied separately to startup packet collection
and the actual authentication cycle.  (This is a bit annoying, since it
means a couple extra syscalls; but the signal handling requirements inside
and outside a transaction are sufficiently different that it seems best
to treat the timeouts as completely independent.)

A small security disadvantage is that if the given database name is invalid,
this will be reported to the client before any authentication happens.
We could work around that by connecting to database "postgres" instead,
but consensus seems to be that it's not worth introducing such surprising
behavior.

Processing of all command-line switches and GUC options received from the
client is now postponed until after authentication.  This means that
PostAuthDelay is much less useful than it used to be --- if you need to
investigate problems during InitPostgres you'll have to set PreAuthDelay
instead.  However, allowing an unauthenticated user to set any GUC options
whatever seems a bit too risky, so we'll live with that.

now.

source directory even for out-of-tree builds.  They are now alsl built in
the build tree.  This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.

PostgresMain switch.  In point of fact, FrontendProtocol is already set
in a backend process, since ProcessStartupPacket() is executed inside
the backend --- it hasn't been run by the postmaster for many years.
And if it were, we'd still certainly want FrontendProtocol to be set before
we get as far as PostgresMain, so that startup errors get reported in the
right protocol.

-v might have some future use in standalone backends, so I didn't go so
far as to remove the switch outright.

Also, initialize FrontendProtocol to 0 not PG_PROTOCOL_LATEST.  The only
likely result of presetting it like that is to mask failure-to-set-it
mistakes.

change ... it's got to return true.

so that their elements are always taken as simple expressions over the
query's input columns.  It originally seemed like a good idea to make them
act exactly like GROUP BY and ORDER BY, right down to the SQL92-era behavior
of accepting output column names or numbers.  However, that was not such a
great idea, for two reasons:

1. It permits circular references, as exhibited in bug #5018: the output
column could be the one containing the window function itself.  (We actually
had a regression test case illustrating this, but nobody thought twice about
how confusing that would be.)

2. It doesn't seem like a good idea for, eg, "lead(foo) OVER (ORDER BY foo)"
to potentially use two completely different meanings for "foo".

Accordingly, narrow down the behavior of window clauses to use only the
SQL99-compliant interpretation that the expressions are simple expressions.