On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).

Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).

On further reflection, that was not a great choice for at least two
reasons:

1.  If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.

2.  If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates.  posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.

Therefore, for now, we'll simply block most signals to guarantee
progress.  SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate.  For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.

Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql

Commit 054325c5eeb3 created a memory leak in PQsendQueryInternal in case
an error occurs while sending the message.  Repair.

Backpatch to 14, like that commit.  Reported by Coverity.

Justin Pryzby reported that some scenarios could cause gathering
of extended statistics to spend many seconds in an un-cancelable
qsort() operation.  To fix, invent qsort_interruptible(), which is
just like qsort_arg() except that it will also do CHECK_FOR_INTERRUPTS
every so often.  This bloats the backend by a couple of kB, which
seems like a good investment.  (We considered just enabling
CHECK_FOR_INTERRUPTS in the existing qsort and qsort_arg functions,
but there are some callers for which that'd demonstrably be unsafe.
Opt-in seems like a better way.)

For now, just apply qsort_interruptible() in statistics collection.
There's probably more places where it could be useful, but we can
always change other call sites as we find problems.

Back-patch to v14.  Before that we didn't have extended stats on
expressions, so that the problem was less severe.  Also, this patch
depends on the sort_template infrastructure introduced in v14.

Tom Lane and Justin Pryzby

Discussion: https://postgr.es/m/20220509000108.GQ28830@telsasoft.com

dshash.c previously maintained flags to be able to assert that you
didn't hold any partition lock.  These flags could get out of sync with
reality in error scenarios.

Get rid of all that, and make assertions about the locks themselves
instead.  Since LWLockHeldByMe() loops internally, we don't want to put
that inside another loop over all partition locks.  Introduce a new
debugging-only interface LWLockAnyHeldByMe() to avoid that.

This problem was noted by Tom and Andres while reviewing changes to
support the new shared memory stats system, and later showed up in
reality while working on commit 389869af.

Back-patch to 11, where dshash.c arrived.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311012712.botrpsikaufzteyt@alap3.anarazel.de
Discussion: https://postgr.es/m/CA%2BhUKGJ31Wce6HJ7xnVTKWjFUWQZPBngxfJVx4q0E98pDr3kAw%40mail.gmail.com

Single quotes are not allowed in json internals, double quotes are.

Reported-by: Eric Mutta
Discussion: https://postgr.es/m/165715362165.665.3875113264927503997@wrigleys.postgresql.org
Backpatch-through: 14

When you hit ^C, the terminal driver in Unix-like systems echoes "^C" as
well as sending an interrupt signal (depending on stty settings).  At
least libedit (but maybe also libreadline) is then confused about the
current cursor location, and corrupts the display if you try to scroll
back.  Fix, by moving to a new line before the next prompt is displayed.

Back-patch to all supported released.

Author: Pavel Stehule <pavel.stehule@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3278793.1626198638%40sss.pgh.pa.us

The examples show the output of array_length() and jsonb_array_length()
for empty arrays.

Discussion: https://postgr.es/m/CAKFQuwaoBmRuWdMLzLHDCFDJDX3wvfQ7egAF0bpik_BFgG1KWg@mail.gmail.com

Author: David G. Johnston

Backpatch-through: 13

Discussion: https://postgr.es/m/20220618085541.ezxdaljlpo6x7msc@home-desktop

Author: Dong Wook Lee

Backpatch-through: 11

When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.

If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.

In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.

Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.

Dean Rasheed, reviewed by Tom Lane.

Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com

We only need to reject cases when the aggregate or operator is
itself declared with a polymorphic type.  Per buildfarm.

Discussion: https://postgr.es/m/3383880.QJadu78ljV@vejsadalnx

When we changed some built-in functions to use anycompatiblearray
instead of anyarray, we created a dump/restore hazard for user-defined
operators and aggregates relying on those functions: the user objects
have to be modified to change their signatures similarly.  This causes
pg_upgrade to fail partway through if the source installation contains
such objects.  We generally try to have pg_upgrade detect such hazards
and fail before it does anything exciting, so add logic to detect
this case too.

Back-patch to v14 where the change was made.

Justin Pryzby, reviewed by Andrey Borodin

Discussion: https://postgr.es/m/3383880.QJadu78ljV@vejsadalnx

We were going into IDLE state too soon when executing queries via
PQsendQuery in pipeline mode, causing several scenarios to misbehave in
different ways -- most notably, as reported by Daniele Varrazzo, that a
warning message is produced by libpq:
  message type 0x33 arrived from server while idle
But it is also possible, if queries are sent and results consumed not in
lockstep, for the expected mediating NULL result values from PQgetResult
to be lost (a problem which has not been reported, but which is more
serious).

Fix this by introducing two new concepts: one is a command queue element
PGQUERY_CLOSE to tell libpq to wait for the CloseComplete server
response to the Close message that is sent by PQsendQuery.  Because the
application is not expecting any PGresult from this, the mechanism to
consume it is a bit hackish.

The other concept, authored by Horiguchi-san, is a PGASYNC_PIPELINE_IDLE
state for libpq's state machine to differentiate "really idle" from
merely "the idle state that occurs in between reading results from the
server for elements in the pipeline".  This makes libpq not go fully
IDLE when the libpq command queue contains entries; in normal cases, we
only go IDLE once at the end of the pipeline, when the server response
to the final SYNC message is received.  (However, there are corner cases
it doesn't fix, such as terminating the query sequence by
PQsendFlushRequest instead of PQpipelineSync; this sort of scenario is
what requires PGQUERY_CLOSE bit above.)

This last bit helps make the libpq state machine clearer; in particular
we can get rid of an ugly hack in pqParseInput3 to avoid considering
IDLE as such when the command queue contains entries.

A new test mode is added to libpq_pipeline.c to tickle some related
problematic cases.
Reported-by: Daniele Varrazzo <daniele.varrazzo@gmail.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA+mi_8bvD0_CW3sumgwPvWdNzXY32itoG_16tDYRu_1S2gV2iw@mail.gmail.com

The existing wording wasn't clear enough and some details weren't
anywhere, such as the fact that autosummarization is off by default.
Improve.

Authors: Roberto Mello, Jaime Casanova, Justin Pryzby, Álvaro Herrera
Discussion: https://postgr.es/m/CAKz==bK_NoJytRyQfX8K-erCW3Ff7--oGYpiB8+ePVS7dRVW_A@mail.gmail.com
Discussion: https://postgr.es/m/20220224193520.GY9008@telsasoft.com

None of the other bison parsers contains this directive, and it gives
rise to some unfortunate and impenetrable messages, so just remove it.

Backpatch to release 12, where it was introduced.

Per gripe from Erik Rijkers

Discussion: https://postgr.es/m/ba069ce2-a98f-dc70-dc17-2ccf2a9bf7c7@xs4all.nl

Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries.  Back-patch to v10, like the
addition of the variable.

Reviewed by Tom Lane.

Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com

ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR.  Instead, if newlocale() has not succeeded before, call it
while establishing a connection.  This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
  proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.

Fail the connection attempt if newlocale() fails.  Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().

The sort of program that may regress is one running in an environment
where newlocale() fails.  If that program establishes connections
without running SQL statements, it will stop working in response to this
change.  I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().

Back-patch to v10 (all supported versions).

Reviewed by Tom Lane.  Reported by Guillaume Lelarge.

Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com

Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate.  Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.

Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment.  This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.

Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication.  Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node.  You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place.  Therefore, back-patch to all
supported releases.

Per build farm animal margay.  This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com

TransactionIdIsInProgress had a fast path to return 'false' if the
single-item CLOG cache said that the transaction was known to be
committed. However, that was wrong, because a transaction is first
marked as committed in the CLOG but doesn't become visible to others
until it has removed its XID from the proc array. That could lead to an
error:

    ERROR:  t_xmin is uncommitted in tuple to be updated

or for an UPDATE to go ahead without blocking, before the previous
UPDATE on the same row was made visible.

The window is usually very short, but synchronous replication makes it
much wider, because the wait for synchronous replica happens in that
window.

Another thing that makes it hard to hit is that it's hard to get such
a commit-in-progress transaction into the single item CLOG cache.
Normally, if you call TransactionIdIsInProgress on such a transaction,
it determines that the XID is in progress without checking the CLOG
and without populating the cache. One way to prime the cache is to
explicitly call pg_xact_status() on the XID. Another way is to use a
lot of subtransactions, so that the subxid cache in the proc array is
overflown, making TransactionIdIsInProgress rely on pg_subtrans and
CLOG checks.

This has been broken ever since it was introduced in 2008, but the race
condition is very hard to hit, especially without synchronous
replication. There were a couple of reports of the error starting from
summer 2021, but no one was able to find the root cause then.

TransactionIdIsKnownCompleted() is now unused. In 'master', remove it,
but I left it in place in backbranches in case it's used by extensions.

Also change pg_xact_status() to check TransactionIdIsInProgress().
Previously, it only checked the CLOG, and returned "committed" before
the transaction was actually made visible to other queries. Note that
this also means that you cannot use pg_xact_status() to reproduce the
bug anymore, even if the code wasn't fixed.

Report and analysis by Konstantin Knizhnik. Patch by Simon Riggs, with
the pg_xact_status() change added by me.

Author: Simon Riggs
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/4da7913d-398c-e2ad-d777-f752cf7f0bbb%40garret.ru

Previously, we encoded both NULL and the first byte at the base address
as 0.  That confusion led to the assertion in commit e07d4ddc, which
failed when min_dynamic_shared_memory was used.  Give them distinct
encodings, by switching to 1-based offsets for non-NULL pointers.  Also
improve macro hygiene in passing (missing/misplaced parentheses), and
remove open-coded access to the raw offset value from freepage.c/h.

Although e07d4ddc was back-patched to 10, the only code that actually
makes use of relptr at the base address arrived in 84b1c63a, so no need
to back-patch further than 14 for now.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20220519193839.GT19626%40telsasoft.com

Since commit 6a2a70a0, we've used signalfd() to receive latch wakeups
when building with WAIT_USE_EPOLL (default for Linux and illumos), and
our traditional self-pipe when falling back to WAIT_USE_POLL (default
for other Unixes with neither epoll() nor kqueue()).

Unexplained hangs and kernel panics have been reported on illumos
systems, apparently linked to this use of signalfd(), leading illumos
users and build farm members to have to define WAIT_USE_POLL explicitly
as a work-around.  A bug report exists at
https://www.illumos.org/issues/13700 but no fix is available yet.

Let's provide a way for illumos users to go back to self-pipes with
epoll(), like releases before 14, and choose that by default.  No change
for Linux users.  To help with development/debugging, macros
WAIT_USE_{EPOLL,POLL} and WAIT_USE_{SIGNALFD,SELF_PIPE} can be defined
explicitly to override the defaults.

Back-patch to 14, where we started using signalfd().
Reported-by: Japin Li <japinli@hotmail.com>
Reported-by: Olaf Bohlen <olbohlen@eenfach.de> (off-list)
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/MEYP282MB1669C8D88F0997354C2313C1B6CA9%40MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM

This Perl segfaults if a declaration of the to-be-aliased package
precedes the aliasing itself.  Per buildfarm members lapwing and wrasse.
Like commit 20911775, back-patch to v10
(all supported versions).

Discussion: https://postgr.es/m/20220625171533.GA2012493@rfd.leadboat.com

Commit a117cebd638dd02e5c2e791c25e43745f233111b used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended.  That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.

Nathan Bossart and Noah Misch

Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de

Remove the need to edit back-branch-specific code sites when
back-patching the addition of a PostgreSQL::Test::Utils symbol.  Replace
per-symbol, incomplete alias lists.  Give old and new package names the
same EXPORT and EXPORT_OK semantics.  Back-patch to v10 (all supported
versions).

Reviewed by Andrew Dunstan.

Discussion: https://postgr.es/m/20220622072144.GD4167527@rfd.leadboat.com

When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.

The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96) but we forgot to update the related code that
frees the attribute map.

Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com

Reported-by: pg@kirasoft.com

Discussion: https://postgr.es/m/165455351426.573551.7050474465030525109@wrigleys.postgresql.org

Backpatch-through: 10

Reported-by: akhilhello@gmail.com

Discussion: https://postgr.es/m/165222922369.669.10475917322916060899@wrigleys.postgresql.org

Backpatch-through: 10

SPI_commit previously left it up to the caller to recover from any error
occurring during commit.  Since that's complicated and requires use of
low-level xact.c facilities, it's not too surprising that no caller got
it right.  Let's move the responsibility for cleanup into spi.c.  Doing
that requires redefining SPI_commit as starting a new transaction, so
that it becomes equivalent to SPI_commit_and_chain except that you get
default transaction characteristics instead of preserving the prior
transaction's characteristics.  We can make this pretty transparent
API-wise by redefining SPI_start_transaction() as a no-op.  Callers
that expect to do something in between might be surprised, but
available evidence is that no callers do so.

Having made that API redefinition, we can fix this mess by having
SPI_commit[_and_chain] trap errors and start a new, clean transaction
before re-throwing the error.  Likewise for SPI_rollback[_and_chain].
Some cleanup is also needed in AtEOXact_SPI, which was nowhere near
smart enough to deal with SPI contexts nested inside a committing
context.

While plperl and pltcl need no changes beyond removing their now-useless
SPI_start_transaction() calls, plpython needs some more work because it
hadn't gotten the memo about catching commit/rollback errors in the
first place.  Such an error resulted in longjmp'ing out of the Python
interpreter, which leaks Python stack entries at present and is reported
to crash Python 3.11 altogether.  Add the missing logic to catch such
errors and convert them into Python exceptions.

This is a back-patch of commit 2e517818f.  That's now aged long enough
to reduce the concerns about whether it will break something, and we
do need to ensure that supported branches will work with Python 3.11.

Peter Eisentraut and Tom Lane

Discussion: https://postgr.es/m/3375ffd8-d71c-2565-e348-a597d6e739e3@enterprisedb.com
Discussion: https://postgr.es/m/17416-ed8fe5d7213d6c25@postgresql.org

We build the partition map entries on subscribers while applying the
changes for update/delete on partitions. The component relation in each
entry is closed after its use so we need to update it on successive use of
cache entries.

This problem was there since the original commit f1ac27bf that
introduced this code but we didn't notice it till the recent commit
26b3455afa started to use the component relation of partition map cache
entry.

Reported-by: Tom Lane, as per buildfarm
Author: Amit Langote, Hou Zhijie
Reviewed-by: Amit Kapila, Shi Yu
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com

In logical replication, we will check if the target table on the
subscriber is updatable by comparing the replica identity of the table on
the publisher with the table on the subscriber. When the target table is a
partitioned table, we only check its replica identity but not for the
partition tables. This leads to assertion failure while applying changes
for update/delete as we expect those to succeed only when the
corresponding partition table has a primary key or has a replica
identity defined.

Fix it by checking the replica identity of the partition table while
applying changes.

Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com

We were not updating the partition map cache in the subscriber even when
the corresponding remote rel is changed. Due to this data was getting
incorrectly replicated for partition tables after the publisher has
changed the table schema.

Fix it by resetting the required entries in the partition map cache after
receiving a new relation mapping from the publisher.

Reported-by: Shi Yu
Author: Shi Yu, Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com

While building a new attrmap which maps partition attribute numbers to
remoterel's, we incorrectly update the map for dropped column attributes.
Later, it caused cache look-up failure when we tried to use the map to
fetch the information about attributes.

This also fixes the partition map cache invalidation which was using the
wrong type cast to fetch the entry. We were using stale partition map
entry after invalidation which leads to the assertion or cache look-up
failure.

Reported-by: Shi Yu
Author: Hou Zhijie, Shi Yu
Reviewed-by: Amit Langote, Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com

If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure.  This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.

To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized.  It's harmless
(and hopefully inexpensive) to do that more than once.

Per bug #17514 from Okano Naoki.  The problem's ancient, so
back-patch to all supported branches.

Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org

The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading.  The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.

Per complaint from Jian He.

Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com

Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: e9a1d874376107ca29ff102e5fbbaee41532217a

Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org

This reverts commits a04ccf6d et al. in the back branches only.
There was some disagreement already over whether to back-patch
157f8739a, on the grounds that it is the sort of behavioral
change that we don't like to back-patch.  Furthermore, it now
looks like the logic needs some more work, which we don't have
time for before the upcoming 14.4 release.  Revert for now, and
perhaps reconsider later.

Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org

In commit ec62cb0aa, I foolishly replaced ExecEvalWholeRowVar's
lookup_rowtype_tupdesc_domain call with just lookup_rowtype_tupdesc,
because I didn't see how a domain could be involved there, and
there were no regression test cases to jog my memory.  But the
existing code was correct, so revert that change and add a test
case showing why it's necessary.  (Note: per comment in struct
DatumTupleFields, it is correct to produce an output tuple that's
labeled with the base composite type, not the domain; hence just
blindly looking through the domain is correct here.)

Per bug #17515 from Dan Kubb.  Back-patch to v11 where domains over
composites became a thing.

Discussion: https://postgr.es/m/17515-a24737438363aca0@postgresql.org

The patch introducing jsonpath dropped a para about that between
two related examples, and didn't bother updating the introductory
sentences that it falsified.  The grammar was pretty shaky as well.