This is another round of refactoring to make things simpler for parallel
pg_dump.  pg_dump.c now issues SQL queries through the relevant Archive
object, rather than relying on the global variable g_conn.  This commit
isn't quite enough to get rid of g_conn entirely, but it makes a big
dent in its utilization and, along the way, manages to be slightly less
code than before.

Do not prompt when options were not specified.  Assume --no-createdb,
--no-createrole, --no-superuser by default.

Also disable prompting for user name in dropdb, unless --interactive
was specified.

reviewed by Josh Kupershmidt

If LWLockWaitUntilFree was called before the first LWLockAcquire call, you
would either crash because of access to uninitialized array or account the
acquisition incorrectly. LWLockConditionalAcquire doesn't have this problem
because it doesn't update the lwlock stats.

In practice, this never happens because there is no codepath where you would
call LWLockWaitUntilfree before LWLockAcquire after a new process is
launched. But that's just accidental, there's no guarantee that that's
always going to be true in the future.

Spotted by Jeff Janes.

The postmaster was coded to treat any unexpected exit of the startup
process (i.e., the WAL replay process) as a catastrophic crash, and not try
to restart it. This was OK so long as the startup process could not have
any sibling postmaster children.  However, if a hot-standby backend
crashes, we SIGQUIT the startup process along with everything else, and the
resulting exit is hardly "unexpected".  Treating it as such meant we failed
to restart a standby server after any child crash at all, not only a crash
of the WAL replay process as intended.  Adjust that.  Back-patch to 9.0
where hot standby was introduced.

Although we will not even issue an XLOG_TBLSPC_DROP WAL record unless
removal of the tablespace's directories succeeds, that does not guarantee
that the same operation will succeed during WAL replay.  Foreseeable
reasons for it to fail include temp files created in the tablespace by Hot
Standby backends, wrong directory permissions on a standby server, etc etc.
The original coding threw ERROR if replay failed to remove the directories,
but that is a serious overreaction.  Throwing an error aborts recovery,
and worse means that manual intervention will be needed to get the database
to start again, since otherwise the same error will recur on subsequent
attempts to replay the same WAL record.  And the consequence of failing to
remove the directories is only that some probably-small amount of disk
space is wasted, so it hardly seems justified to throw an error.
Accordingly, arrange to report such failures as LOG messages and keep going
when a failure occurs during replay.

Back-patch to 9.0 where Hot Standby was introduced.  In principle such
problems can occur in earlier releases, but Hot Standby increases the odds
of trouble significantly.  Given the lack of field reports of such issues,
I'm satisfied with patching back as far as the patch applies easily.

Instead, everything that needs the Archive object now gets it as a
parameter.  This is necessary infrastructure for parallel pg_dump,
but is also amply justified by the ugliness of the current code
(though a lot more than this is needed to fix that problem).

Change various places in the code that are referencing the global
Archive object g_fout to instead reference the Archive object fout
which is already being passed as a parameter.  For parallel pg_dump to
work, we're going to need multiple Archive(Handle) objects, so the
real solution here is to pass down the Archive object to everywhere
that it needs to go, but we might as well pick the low-hanging fruit
first.

Originally, most of this code assumed that no Postgres backends could be
running concurrently with it, and so no locking could be needed.  That
assumption fails in Hot Standby.  While it's still true that Hot Standby
backends should never change values like nextXid, they can examine them,
and consistency is important in some cases such as when computing a
snapshot.  Therefore, prudence requires that WAL replay code obtain the
relevant locks when modifying such variables, even though it can examine
them without taking a lock.  We were following that coding rule in some
places but not all.  This commit applies the coding rule uniformly to all
updates of ShmemVariableCache and MultiXactState fields; a search of the
replay routines did not find any other cases that seemed to be at risk.

In addition, this commit fixes a longstanding thinko in replay of NEXTOID
and checkpoint records: we tried to advance nextOid only if it was behind
the value in the WAL record, but the comparison would draw the wrong
conclusion if OID wraparound had occurred since the previous value.
Better to just unconditionally assign the new value, since OID assignment
shouldn't be happening during replay anyway.

The additional locking seems to be more in the nature of future-proofing
than fixing any live bug, so I am not going to back-patch it.  The NEXTOID
fix will be back-patched separately.

Declare this in Makefile to avoid failures in parallel compiles.

Author: Lionel Elie Mamane

RestoreBkpBlocks was in the habit of zeroing and refilling the target
buffer; which was perfectly safe when the code was written, but is unsafe
during Hot Standby operation.  The reason is that we have coding rules
that allow backends to continue accessing a tuple in a heap relation while
holding only a pin on its buffer.  Such a backend could see transiently
zeroed data, if WAL replay had occasion to change other data on the page.
This has been shown to be the cause of bug #6425 from Duncan Rance (who
deserves kudos for developing a sufficiently-reproducible test case) as
well as Bridget Frey's re-report of bug #6200.  It most likely explains the
original report as well, though we don't yet have confirmation of that.

To fix, change the code so that only bytes that are supposed to change will
change, even transiently.  This actually saves cycles in RestoreBkpBlocks,
since it's not writing the same bytes twice.

Also fix seq_redo, which has the same disease, though it has to work a bit
harder to meet the requirement.

So far as I can tell, no other WAL replay routines have this type of bug.
In particular, the index-related replay routines, which would certainly be
broken if they had to meet the same standard, are not at risk because we
do not have coding rules that allow access to an index page when not
holding a buffer lock on it.

Back-patch to 9.0 where Hot Standby was added.

All other WAL redo routines either call RestoreBkpBlocks() or Assert that
they haven't been passed any backup blocks.  Make this one do likewise.
Also, fix incorrect routine name in its failure message.

Matthew Draper, reviewed by Hitoshi Harada

This reverts commit 500cf66d.  As was
more or less expected, a small minority of platforms won't accept
denormalized input even with the recent changes.  It doesn't seem
especially helpful to test this if we're going to have to provide an
alternate expected-file to allow failure.

PQconectdb.

Also move the escape_json function from explain.c to json.c where it
seems to belong.

Andrew Dunstan, Reviewd by Abhijit Menon-Sen.

Further improve on commit c75e1436.
Instead of building both .o files and binaries in the same make rule,
just rely on the normal .c -> .o rule.  This will ensure that
dependency tracking is used when enabled.  To do this, disable the
implicit direct .c -> binary rule globally, which will also prevent
the original problem (*.dSYM junk) from reappearing elsewhere.

This was presumably intended to work this way all along, but a few key
bits of indxpath.c didn't get the memo.

Robert Haas and Tom Lane

When testing bits (but not when setting or clearing them), we now
won't check whether the map has been extended.  This significantly
improves performance in the case where the visibility map doesn't
exist yet, by avoiding an extra system call per tuple.  To make
sure backends notice eventually, send an smgr inval on VM extension.

Dean Rasheed, with minor modifications by me.

reviewed by Robert Haas and Pavel Stehule

Instead of always completing SQL key words in upper case, look at the
word being completed and match the case.

reviewed by Fujii Masao

This was submitted with the previous patch, but I'm committing it
separately to ease backing it out if these results prove too unportable.

Marti Raudsepp, after a proposal by Jeroen Vermeulen

On some platforms, strtod() reports ERANGE for a denormalized value (ie,
one that can be represented as distinct from zero, but is too small to have
full precision).  On others, it doesn't.  It seems better to try to accept
these values consistently, so add a test to see if the result value
indicates a true out-of-range condition.  This should be okay per Single
Unix Spec.  On machines where the underlying math isn't IEEE standard, the
behavior for such small numbers may not be very consistent, but then it
wouldn't be anyway.

Marti Raudsepp, after a proposal by Jeroen Vermeulen

In dry-run mode, just the name of the file to be removed is printed to
stdout; this is so the user can easily plug it into another program
through a pipe.  If debug mode is also specified, a more verbose message
is printed to stderr.

Author: Gabriele Bartolini
Reviewer: Josh Kupershmidt

Marko Kreen

Don't quote the output of format_procedure(); it's already quoted quite
enough.  Remove the fn_name field, which was now just dead weight.  Fix
remaining expected-output files.

This is a small help to the compiler and static analyzers.

This got broken by commit 4c6cedd1,
which caused PL/pgsql error messages to print the function
signature, not just the name.

Per buildfarm.

Sigh.

Like the XML data type, we simply store JSON data as text, after checking
that it is valid.  More complex operations such as canonicalization and
comparison may come later, but this is enough for not.

There are a few open issues here, such as whether we should attempt to
detect UTF-8 surrogate pairs represented as \uXXXX\uYYYY, but this gets
the basic framework in place.

This makes it unambiguous which function the message is coming from, if you
have overloaded functions.

Pavel Stehule, reviewed by Abhijit Menon-Sen.

If there was a wait-until-free process in the head of the wait queue,
followed by an exclusive locker, the exclusive locker was not be woken up
as it should.

The sequence USAGE privilege is sufficiently similar to the SQL
standard that it seems reasonable to show in the information schema.
Also add some compatibility notes about it on the GRANT reference
page.

Add result object functions .colnames, .coltypes, .coltypmods to
obtain information about the result column names and types, which was
previously not possible in the PL/Python SPI interface.

reviewed by Abhijit Menon-Sen

In some hopeless situations, certain library functions in libpq and
libpgport quit the program.  Use abort() for that instead of exit(),
so we don't interfere with the normal exit codes the program might
use, we clearly signal the abnormal termination, and the caller has a
chance of catching the termination.

This was originally pointed out by Debian's Lintian program.