Per discussion with Andrew Dunstan, it seems there are three peculiarities
of the Python installation on MinGW (or at least, of the instance on
buildfarm member frogmouth).  First, the library name doesn't contain
"2.7" but just "27".  It looks like we can deal with that by consulting
get_config_vars('VERSION') to see whether a dot should be used or not.
Second, the library might be in c:/Windows/System32, analogously to it
possibly being in /usr/lib on Unix-oid platforms.  Third, it's apparently
not standard to use the prefix "lib" on the file name.  This patch will
accept files with or without "lib", but the first part of that may well
be dead code.

Loose ends from commit 2a0f89cd.

Daniel Gustafsson

Most Unix-oid platforms provide a symlink "libfoo.so" -> "libfoo.so.n.n"
to allow the linker to resolve a reference "-lfoo" to a version-numbered
shared library.  OpenBSD has apparently hacked ld(1) to do this internally,
because there are no such symlinks to be found in their library
directories.  Tweak the new code in PGAC_CHECK_PYTHON_EMBED_SETUP to cope.
Per buildfarm member curculio.

Thomas Munro

Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too.  Insert "PG_" at the front of each
name in order to disambiguate.

Michael Paquier

Just turning the crank on the project started in commit d51924be.
These cases turn out to be exact subsets of the boilerplate needed
for hstore_plpython.

Discussion: <2652.1475512158@sss.pgh.pa.us>

Debian does it that way, for no doubt what seems to them a good reason.
Thanks to Aidan Van Dyk for confirmation.

Older versions of Python produce garbage (or at least useless) values of
get_config_vars('LDLIBRARY').  Newer versions produce garbage (or at least
useless) values of get_config_vars('SO'), which was defeating our configure
logic that attempted to identify where the Python shlib really is.  The net
result, at least with a stock Python 3.5 installation on macOS, was that
we were linking against a static library in the mistaken belief that it was
a shared library.  This managed to work, if you count statically absorbing
libpython into plpython.so as working.  But it no longer works as of commit
d51924be, because now we get separate static copies of libpython in
plpython.so and hstore_plpython.so, and those can't interoperate on the
same data.  There are some other infelicities like assuming that nobody
ever installs a private version of Python on a macOS machine.

Hence, forget about looking in $python_configdir for the Python shlib;
as far as I can tell no version of Python has ever put one there, and
certainly no currently-supported version does.  Also, rather than relying
on get_config_vars('SO'), just try all the possibilities for shlib
extensions.  Also, rather than trusting Py_ENABLE_SHARED, believe we've
found a shlib only if it has a recognized extension.  Last, explicitly
cope with the possibility that the shlib is really in /usr/lib and
$python_libdir is a red herring --- this is the actual situation on older
macOS, but we were only accidentally working with it.

Discussion: <5300.1475592228@sss.pgh.pa.us>

Commit 6f3bd98e is still making
the buildfarm unhappy.  This time it's mastodon that is complaining.

Preloading is done by logtape.c now.

Buildfarm member mylodon doesn't like them.  Actually, I don't like
them either, but I failed to notice these before pushing commit
6f3bd98e.

WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h.  This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.

Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.

Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity.  We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.

Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.

In commit d51924be, I overlooked the need to provide linkage for
PLyUnicode_FromStringAndSize, because that's only used (and indeed
only exists) in Python 3 builds.

In light of the need to #if this item, rearrange the ordering of
the code related to each function pointer, so as not to need more
#if's than absolutely necessary.

Per buildfarm.

mergepreread()/mergeprereadone() don't exist anymore, the function that
does roughly the same is now called mergereadnext().

Before initializing iteration over a subtransaction's changes, the last
few changes were not spilled to disk. That's correct if the transaction
didn't spill to disk, but otherwise... This bug can lead to missed or
misorderd subtransaction contents when they were spilled to disk.

Move spilling of the remaining in-memory changes to
ReorderBufferIterTXNInit(), where it can easily be applied to the top
transaction and, if present, subtransactions.

Since this code had too many bugs already, noticeably increase test
coverage.

Fixes: #14319
Reported-By: Huan Ruan
Discussion: <20160909012610.20024.58169@wrigleys.postgresql.org>
Backport: 9,4-, where logical decoding was added

Previously, on most platforms, we allowed hstore_plpython's references
to hstore and plpython to be unresolved symbols at link time, trusting
the dynamic linker to resolve them when the module is loaded.  This
has a number of problems, the worst being that the dynamic linker
does not know where the references come from and can do nothing but
fail if those other modules haven't been loaded.  We've more or less
gotten away with that for the limited use-case of datatype transform
modules, but even there, it requires some awkward hacks, most recently
commit 83c24920.

Instead, let's not treat these references as linker-resolvable at all,
but use function pointers that are manually filled in by the module's
_PG_init function.  There are few enough contact points that this
doesn't seem unmaintainable, at least for these use-cases.  (Note that
the same technique wouldn't work at all for decoupling from libpython
itself, but fortunately that's just a standard shared library and can
be linked to normally.)

This is an initial patch that just converts hstore_plpython.  If the
buildfarm doesn't find any fatal problems, I'll work on the other
transform modules soon.

Tom Lane, per an idea of Andres Freund's.

Discussion: <2652.1475512158@sss.pgh.pa.us>

Commit 88e98230 invented GUC_UNIT_XSEGS for min_wal_size and max_wal_size,
but neglected to make it display sensibly in pg_settings.unit (by adding a
case to the switch in GetConfigOptionByNum).  Fix that, and adjust said
switch to throw a run-time error the next time somebody forgets.

In passing, avoid using a static buffer for the output string --- the rest
of this function pstrdup's from a local buffer, and I see no very good
reason why the units code should do it differently and less safely.

Per report from Otar Shavadze.  Back-patch to 9.5 where the new unit type
was added.

Report: <CAG-jOyA=iNFhN+yB4vfvqh688B7Tr5SArbYcFUAjZi=0Exp-Lg@mail.gmail.com>

Attempting to COPY a subset of columns from a table with RLS enabled
would fail due to an invalid query being constructed (using a single
ColumnRef with the list of fields to exact in 'fields', but that's for
the different levels of an indirection for a single column, not for
specifying multiple columns).

Correct by building a ColumnRef and then RestTarget for each column
being requested and then adding those to the targetList for the select
query.  Include regression tests to hopefully catch if this is broken
again in the future.

Patch-By: Adam Brightwell
Reviewed-By: Michael Paquier

pg_upgrade checks whether all the shared libraries used in the old cluster
are also available in the new one by issuing LOAD for each library name.
Previously, it cared not what order it did the LOADs in.  Ideally it
should not have to care, but currently the transform modules in contrib
fail unless both the language and datatype modules they depend on are
loaded first.  A backend-side solution for that looks possible but
probably not back-patchable, so as a stopgap measure, let's do the LOAD
tests in order by library name length.  That should fix the problem for
reasonably-named transform modules, eg "hstore_plpython" will be loaded
after both "hstore" and "plpython".  (Yeah, it's a hack.)

In a larger sense, having a predictable order of these probes is a good
thing, since it will make upgrades predictably work or not work in the
face of inter-library dependencies.  Also, this patch replaces O(N^2)
de-duplication logic with O(N log N) logic, which could matter in
installations with very many databases.  So I don't foresee reverting this
even after we have a proper fix for the library-dependency problem.

In passing, improve a couple of SQL queries used here.

Per complaint from Andrew Dunstan that pg_upgrade'ing the transform contrib
modules failed.  Back-patch to 9.5 where transform modules were introduced.

Discussion: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>

Don't pre-read tuples into SortTuple slots during merge. Instead, use the
memory for larger read buffers in logtape.c. We're doing the same number
of READTUP() calls either way, but managing the pre-read SortTuple slots
is much more complicated. Also, the on-tape representation is more compact
than SortTuples, so we can fit more pre-read tuples into the same amount
of memory this way. And we have better cache-locality, when we use just a
small number of SortTuple slots.

Now that we only hold one tuple from each tape in the SortTuple slots, we
can greatly simplify the "batch memory" management. We now maintain a
small set of fixed-sized slots, to hold the tuples, and fall back to
palloc() for larger tuples. We use this method during all merge phases,
not just the final merge, and also when randomAccess is requested, and
also in the TSS_SORTEDONTAPE case. In other words, it's used whenever we
do an external sort.

Reviewed by Peter Geoghegan and Claudio Freire.

Discussion: <CAM3SWZTpaORV=yQGVCG8Q4axcZ3MvF-05xe39ZvORdU9JcD6hQ@mail.gmail.com>

Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.

Another oversight in commit 473b9328, reported by Andrew Dunstan.

Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>

Fixes errors introduced in commit bc34223b, as detected by Coverity.

In passing, report ENOSPC for a short write while padding a new wal file in
open_walfile, make certain that close_walfile closes walfile in all cases,
and improve a couple of comments.

Michael Paquier and Tom Lane

In standard Unix builds, postmaster child processes do ClosePostmasterPorts
immediately after InitPostmasterChild, that is almost immediately after
being spawned.  This is important because we don't want children holding
open the postmaster's end of the postmaster death watch pipe.

However, in EXEC_BACKEND builds, SubPostmasterMain was postponing this
responsibility significantly, in order to make it slightly more convenient
to pass the right flag value to ClosePostmasterPorts.  This is bad,
particularly seeing that process_shared_preload_libraries() might invoke
nearly-arbitrary code.  Rearrange so that we do it as soon as we've
fetched the socket FDs via read_backend_variables().

Also move the comment explaining about randomize_va_space to before the
call of PGSharedMemoryReAttach, which is where it's relevant.  The old
placement was appropriate when the reattach happened inside
CreateSharedMemoryAndSemaphores, but that was a long time ago.

Back-patch to 9.3; the patch doesn't apply cleanly before that, and
it doesn't seem worth a lot of effort given that we've had no actual
field complaints traceable to this.

Discussion: <4157.1475178360@sss.pgh.pa.us>

collect_corrupt_items() failed to initialize tuple.t_self.  While
HeapTupleSatisfiesVacuum() doesn't actually use that value, it does
Assert that it's valid, so that the code would dump core if ip_posid
chanced to be zero.  (That's somewhat unlikely, which probably explains
how this got missed.  In any case it wouldn't matter for field use.)

Also, collect_corrupt_items was returning the wrong TIDs, that is the
contents of t_ctid rather than the tuple's own location.  This would
be the same thing in simple cases, but it could be wrong if, for
example, a past update attempt had been rolled back, leaving a live
tuple whose t_ctid doesn't point at itself.

Also, in pg_visibility(), guard against trying to read a page past
the end of the rel.  The VM code handles inquiries beyond the end
of the map by silently returning zeroes, and it seems like we should
do the same thing here.

I ran into the assertion failure while using pg_visibility to check
pg_upgrade's behavior, and then noted the other problems while
reading the code.

Report: <29043.1475288648@sss.pgh.pa.us>

Add omitted names for some function parameters.
Fix some minor grammatical issues.

There is no need for "all: all-lib" to be placed before inclusion of
Makefile.shlib.  Makefile.global is what ensures that "all" is the
default target, and we already document that that has to be included
first.  Per comment from Pavel Raiskup.

Discussion: <1925924.izSMJEZO3x@unused-4-107.brq.redhat.com>

The sequence "configure; cd src/pl/plpython; make -j" failed due to
trying to compile plpython's .o files before the generated headers
finished building.  (This is an important real-world case, since it's
the typical second step when building both plpython2 and plpython3.)
This happens because the submake-generated-headers target is not
placed in a way to make it a prerequisite to compiling the .o files.
Fix that.

Checking other uses of submake-generated-headers, I noted that the one
attached to pg_regress was similarly misplaced; but it's actually not
needed at all for pg_regress.o, rather regress.o, so move it to be a
prerequisite of that.

Back-patch to 9.6 where submake-generated-headers was introduced
(by commit 548af97f).  It's not immediately clear to me why the
previous coding didn't have the same issue; but since we've not
had field reports of plpython make failing, leave it alone in the
older branches.

Pavel Raiskup and Tom Lane

Discussion: <1925924.izSMJEZO3x@unused-4-107.brq.redhat.com>

Before pg_regress runs psql, set the application name to the test name.
Similarly, set the application name to the test file name in the TAP
tests.  Also, set a default log_line_prefix that show the application
name, as well as the PID and a time stamp.

That way, the server log output can be correlated to the test input
files, making debugging a bit easier.

The previous design for this had copyFile(), linkFile(), and
rewriteVisibilityMap() returning strerror strings, with the caller
producing one-size-fits-all error messages based on that.  This made it
impossible to produce messages that described the failures with any degree
of precision, especially not short-read problems since those don't set
errno at all.

Since pg_upgrade has no intention of continuing after any error in this
area, let's fix this by just letting these functions call pg_fatal() for
themselves, making it easy for each point of failure to have a suitable
error message.  Taking this approach also allows dropping cleanup code
that was unnecessary and was often rather sloppy about preserving errno.
To not lose relevant info that was reported before, pass in the schema name
and table name of the current table so that they can be included in the
error reports.

An additional problem was the use of getErrorText(), which was flat out
wrong for all but a couple of call sites, because it unconditionally did
"_dosmaperr(GetLastError())" on Windows.  That's only appropriate when
reporting an error from a Windows-native API, which only a couple of
the callers were actually doing.  Thus, even the reported strerror string
would be unrelated to the actual failure in many cases on Windows.
To fix, get rid of getErrorText() altogether, and just have call sites
do strerror(errno) instead, since that's the way all the rest of our
frontend programs do it.  Add back the _dosmaperr() calls in the two
places where that's actually appropriate.

In passing, make assorted messages hew more closely to project style
guidelines, notably by removing initial capitals in not-complete-sentence
primary error messages.  (I didn't make any effort to clean up places
I didn't have another reason to touch, though.)

Per discussion of a report from Thomas Kellerer.  Back-patch to 9.6,
but no further; given the relative infrequency of reports of problems
here, it's not clear it's worth adapting the patch to older branches.

Patch by me, but with credit to Alvaro Herrera for spotting the issue
with getErrorText's misuse of _dosmaperr().

Discussion: <nsjrbh$8li$1@blaine.gmane.org>

This is new code in 9.6, and evidently we missed out testing it as
thoroughly as it should have been.  Bugs fixed here:

1. Use binary not text mode to open the files on Windows.  Before, if
the visibility map chanced to contain two bytes that looked like \r\n,
Windows' read() would convert that to \n, which both corrupts the map
data and causes the file to look shorter than it should.  Unless you
were *very* unlucky and had an exact multiple of 8K such occurrences
in each VM file, this would cause pg_upgrade to report a failure,
though with a rather obscure error message.

2. The code for copying rebuilt bytes into the output was simply wrong.
It chanced to work okay on little-endian machines but would emit the
bytes in the wrong order on big-endian, leading to silent corruption
of the visibility map data.

3. The code was careless about alignment of the working buffers.  Given
all three of an alignment-picky architecture, a compiler that chooses
to put the new_vmbuf[] local variable at an odd starting address, and
a checksum-enabled database, pg_upgrade would dump core.

Point one was reported by Thomas Kellerer, the other two detected by
code-reading.

Point two is much the nastiest of these issues from an impact standpoint,
though fortunately it affects only a minority of users.  The Windows issue
will definitely bite people, but it seems quite unlikely that there would
be undetected corruption from that.

In addition, I failed to resist the temptation to do some minor cosmetic
adjustments, mostly improving the comments.

It would be a good idea to try to improve the error reporting here, but
that seems like material for a separate patch.

Discussion: <nsjrbh$8li$1@blaine.gmane.org>

Otherwise the enum symbols are not visible outside the struct in C++.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>

Prototypes for functions implementing V1-callable functions are no
longer necessary.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>

atoi() needs stdlib.h
strcmp() needs string.h
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>

Using exit() requires stdlib.h, which is not included.  Use return
instead.  Also add return type for main().
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>

Using offsetof() with a run-time computed argument is not allowed in
either C or C++.  Apparently, gcc allows it, but g++ doesn't.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>

There is a small window between when the server closes out the existing
segment and the new one is created. Put a loop around the open call in
this case to make sure we wait for the new file to actually appear.

Now that we track initial privileges on extension objects and changes to
those permissions, we can drop the superuser() checks from the various
functions which are part of the pgstattuple extension and rely on the
GRANT system to control access to those functions.

Since a pg_upgrade will preserve the version of the extension which
existed prior to the upgrade, we can't simply modify the existing
functions but instead need to create new functions which remove the
checks and update the SQL-level functions to use the new functions
(and to REVOKE EXECUTE rights on those functions from PUBLIC).

Thanks to Tom and Andres for adding support for extensions to follow
update paths (see: 40b449ae), allowing this patch to be much smaller
since no new base version script needed to be included.

Approach suggested by Noah.

Reviewed by Michael Paquier.