Most of what is produced by the detailed verbosity level is of no
interest at all, so switch to the normal level for more usable output.

Christian Ullrich

Backpatch to all live branches

Don't try to examine S_ISLNK(st.st_mode) after a failed lstat().
It's undefined.

Also, if the lstat() reported ENOENT, we do not wish that to be a hard
error, but the code might nonetheless treat it as one (giving an entirely
misleading error message, too) depending on luck-of-the-draw as to what
S_ISLNK() returned.

Don't throw error for ENOENT from rmdir(), either.  (We're not really
expecting ENOENT because we just stat'd the file successfully; but
if we're going to allow ENOENT in the symlink code path, surely the
directory code path should too.)

Generate an appropriate errcode for its-the-wrong-type-of-file complaints.
(ERRCODE_SYSTEM_ERROR doesn't seem appropriate, and failing to write
errcode() around it certainly doesn't work, and not writing an errcode
at all is not per project policy.)

Valgrind noticed the undefined S_ISLNK result; the other problems emerged
while reading the code in the area.

All of this appears to have been introduced in 8f15f74a.
Back-patch to 9.5 where that commit appeared.

David Rowley, reviewed by Tomas Vondra

Patch adds a new, more rich,  way to emit error message or exception from
PL/Pythonu code.

Author: Pavel Stehule
Reviewers: Catalin Iacob, Peter Eisentraut, Jim Nasby

Benchmarking has shown that the current number of clog buffers limits
scalability. We've previously increased the number in 33aaa139, but
that's not sufficient with a large number of clients.

We've benchmarked the cost of increasing the limit by benchmarking worst
case scenarios; testing showed that 128 buffers don't cause a
regression, even in contrived scenarios, whereas 256 does

There are a number of more complex patches flying around to address
various clog scalability problems, but this is simple enough that we can
get it into 9.6; and is beneficial even after those patches have been
applied.

It is a bit unsatisfactory to increase this in small steps every few
releases, but a better solution seems to require a rewrite of slru.c;
not something done quickly.

Author: Amit Kapila and Andres Freund
Discussion: CAA4eK1+-=18HOrdqtLXqOMwZDbC_15WTyHiFruz7BvVArZPaAw@mail.gmail.com

The code that estimates what parallel degree should be uesd for the
scan of a relation is currently rather stupid, so add a parallel_degree
reloption that can be used to override the planner's rather limited
judgement.

Julien Rouhaud, reviewed by David Rowley, James Sewell, Amit Kapila,
and me.  Some further hacking by me.

Per Tom Lane and the buildfarm.

The PAM_RHOST item is set to the remote IP address or host name and can
be used by PAM modules.  A pg_hba.conf option is provided to choose
between IP address and resolved host name.

From: Grzegorz Sampolski <grzsmp@gmail.com>
Reviewed-by: Haribabu Kommi <kommi.haribabu@gmail.com>

Rename comparePos() to compareWordEntryPos() to prevent export of too
generic name.

Per gripe from Tom Lane.

Authors: Suraj Kharage, Michael Paquier, Masahiko Sawada, refactored by me
Reviewed-By: Kyotaro Horiguchi

We still use replacement selection for the first run of the sort only
and only when the number of tuples is relatively small.  Otherwise,
the first run, and subsequent runs in all cases, are produced using
quicksort.  This tends to be faster except perhaps for very small
amounts of working memory.

Peter Geoghegan, reviewed by Tomas Vondra, Jeff Janes, Mithun Cy,
Greg Stark, and me.

Contention on the relation extension lock can become quite fierce when
multiple processes are inserting data into the same relation at the same
time at a high rate.  Experimentation shows the extending the relation
multiple blocks at a time improves scalability.

Dilip Kumar, reviewed by Petr Jelinek, Amit Kapila, and me.

Thomas Munro

In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.

This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.

Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.

Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.

Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com

Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only

We shouldn't be adding roles during the regression tests as that can
cause back-to-back installcheck runs to fail and users running the
regression tests likley don't want those extra roles.

Pointed out by Tom

Per investigation failure skink buildfarm member and
RANDOMIZE_ALLOCATED_MEMORY help

Extracted from pending unique-join patch, since this is a rather large
delta but it's simply moving code out into separately-accessible
subroutines.

I (tgl) did choose to add a bit more logic to rel_supports_distinctness,
so that it verifies that there's at least one potentially usable unique
index rather than just checking indexlist != NIL.  Otherwise there's
no functional change here.

David Rowley

default_text_search_config variable.

Per skink buldfarm member

While prior to this patch the user-visible effect on the database
of any set of successfully committed serializable transactions was
always consistent with some one-at-a-time order of execution of
those transactions, the presence of declarative constraints could
allow errors to occur which were not possible in any such ordering,
and developers had no good workarounds to prevent user-facing
errors where they were not necessary or desired.  This patch adds
a check for serialization failure ahead of duplicate key checking
so that if a developer explicitly (redundantly) checks for the
pre-existing value they will get the desired serialization failure
where the problem is caused by a concurrent serializable
transaction; otherwise they will get a duplicate key error.

While it would be better if the reads performed by the constraints
could count as part of the work of the transaction for
serialization failure checking, and we will hopefully get there
some day, this patch allows a clean and reliable way for developers
to work around the issue.  In many cases existing code will already
be doing the right thing for this to "just work".

Author: Thomas Munro, with minor editing of docs by me
Reviewed-by: Marko Tiikkaja, Kevin Grittner

Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
  should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
  readable

Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov

Fastpath ignores this if no triggers defined.

Author: Tomas Vondra, with fastpath and comments added by me
Reviewers: David Rowley, Simon Riggs

Commit c22650cd sparked a discussion
about diverse interpretations of "token user" in error messages.  Expel
old and new specimens of that phrase by making all GetTokenInformation()
callers report errors the way GetTokenUser() has been reporting them.
These error conditions almost can't happen, so users are unlikely to
observe this change.

Reviewed by Tom Lane and Stephen Frost.

GetTokenUser() will have reported an adequate error message.  These
error conditions almost can't happen, so users are unlikely to observe
this change.

Reviewed by Tom Lane and Stephen Frost.

Pointed out by Tom.

Now that pg_dump will properly dump out any ACL changes made to
functions which exist in pg_catalog, switch to using the GRANT system
to manage access to those functions.

This means removing 'if (!superuser()) ereport()' checks from the
functions themselves and then REVOKEing EXECUTE right from 'public' for
these functions in system_views.sql.

Reviews by Alexander Korotkov, Jose Luis Tallon

Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.

The original values are tracked in pg_init_privs.  When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.

This should not change dumps against pre-9.6 databases.

Reviews by Alexander Korotkov, Jose Luis Tallon

Historically, the "dump" component of the namespace has been used
to decide if the objects inside of the namespace should be dumped
also.  Given that "dump" is now a bitmask and may be partial, and
we may want to dump out all components of the namespace object but
only some of the components of objects contained in the namespace,
create a "dump_contains" bitmask which will represent what components
of the objects inside of a namespace should be dumped out.

No behavior change here, but in preparation for a change where we
will dump out just the ACLs of objects in pg_catalog, but we might
not dump out the ACL of the pg_catalog namespace itself (for instance,
when it hasn't been changed from the value set at initdb time).

Reviews by Alexander Korotkov, Jose Luis Tallon

pg_dump has historically used a simple boolean 'dump' value to indicate
if a given object should be included in the dump or not.  Instead, use
a bitmap which breaks down the components of an object into their
distinct pieces and use that bitmap to only include the components
requested.

This does not include any behavioral change, but is in preperation for
the change to dump out just ACLs for objects in pg_catalog.

Reviews by Alexander Korotkov, Jose Luis Tallon

This new catalog holds the privileges which the system was
initialized with at initdb time, along with any permissions set
by extensions at CREATE EXTENSION time.  This allows pg_dump
(and any other similar use-cases) to detect when the privileges
set on initdb-created or extension-created objects have been
changed from what they were set to at initdb/extension-creation
time and handle those changes appropriately.

Reviews by Alexander Korotkov, Jose Luis Tallon

It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.

Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan

Some object types have names that are only unique for one table.  But
for those we generally didn't put the table name into the dump TOC tag.
So it was impossible to identify these objects if the same name was used
for multiple tables.  This affects policies, column defaults,
constraints, triggers, and rules.

Fix by adding the table name to the TOC tag, so that it now reads
"$schema $table $object".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>

Getting annoyed at the amount of unrelated chatter I get from pgindent'ing
Rowley's unique-joins patch.  Re-indent all the files it touches.

Commit cee31f5f fixed this problem, but commit 989be081 accidentally
reverted the fix.

Thomas Munro

Remove recent changes to logging XLOG_RUNNING_XACTS by request.

API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.

Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.

(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)

Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com

Previously synchronous replication offered only the ability to confirm
that all changes made by a transaction had been transferred to at most
one synchronous standby server.

This commit extends synchronous replication so that it supports multiple
synchronous standby servers. It enables users to consider one or more
standby servers as synchronous, and increase the level of transaction
durability by ensuring that transaction commits wait for replies from
all of those synchronous standbys.

Multiple synchronous standby servers are configured in
synchronous_standby_names which is extended to support new syntax of
'num_sync ( standby_name [ , ... ] )', where num_sync specifies
the number of synchronous standbys that transaction commits need to
wait for replies from and standby_name is the name of a standby
server.

The syntax of 'standby_name [ , ... ]' which was used in 9.5 or before
is also still supported. It's the same as new syntax with num_sync=1.

This commit doesn't include "quorum commit" feature which was discussed
in pgsql-hackers. Synchronous standbys are chosen based on their priorities.
synchronous_standby_names determines the priority of each standby for
being chosen as a synchronous standby. The standbys whose names appear
earlier in the list are given higher priority and will be considered as
synchronous. Other standby servers appearing later in this list
represent potential synchronous standbys.

The regression test for multiple synchronous standbys is not included
in this commit. It should come later.

Authors: Sawada Masahiko, Beena Emerson, Michael Paquier, Fujii Masao
Reviewed-By: Kyotaro Horiguchi, Amit Kapila, Robert Haas, Simon Riggs,
Amit Langote, Thomas Munro, Sameer Thakur, Suraj Kharage, Abhijit Menon-Sen,
Rajeev Rastogi

Many thanks to the various individuals who were involved in
discussing and developing this feature.

Commit b8a91d9d put the description of the new IF EXISTS clause in the
wrong place -- move it where it belongs.

Backpatch to 9.2.

This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output.  Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.

Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org