Fix issues in invalidation of obsolete replication slots.

This commit fixes the following issues.

1. There is the case where the slot is dropped while trying to invalidate it.
    InvalidateObsoleteReplicationSlots() did not handle this case, and
    which could cause checkpoint to fail.

2. InvalidateObsoleteReplicationSlots() could emit the same log message
    multiple times unnecessary. It should be logged only once.

3. When marking the slot as used, we always searched the target slot from
    all the replication slots even if we already found it. This could cause
    useless waste of cycles.

Back-patch to v13 where these issues were added as a part of
max_slot_wal_keep_size code.

Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://postgr.es/m/66c05b67-3396-042c-1b41-bfa6c3ddcf82@oss.nttdata.com

src/backend/replication/slot.c

@@ -99,6 +99,9 @@ ReplicationSlot *MyReplicationSlot = NULL;
 int			max_replication_slots = 0;	/* the maximum number of replication
 										 * slots */
 
+static ReplicationSlot *SearchNamedReplicationSlot(const char *name);
+static int ReplicationSlotAcquireInternal(ReplicationSlot *slot,
+										  const char *name, SlotAcquireBehavior behavior);
 static void ReplicationSlotDropAcquired(void);
 static void ReplicationSlotDropPtr(ReplicationSlot *slot);
 
@@ -322,77 +325,117 @@ ReplicationSlotCreate(const char *name, bool db_specific,
 }
 
 /*
- * Find a previously created slot and mark it as used by this backend.
+ * Search for the named replication slot.
  *
- * The return value is only useful if behavior is SAB_Inquire, in which
- * it's zero if we successfully acquired the slot, or the PID of the
- * owning process otherwise.  If behavior is SAB_Error, then trying to
- * acquire an owned slot is an error.  If SAB_Block, we sleep until the
- * slot is released by the owning process.
+ * Return the replication slot if found, otherwise NULL.
+ *
+ * The caller must hold ReplicationSlotControlLock in shared mode.
  */
-int
-ReplicationSlotAcquire(const char *name, SlotAcquireBehavior behavior)
+static ReplicationSlot *
+SearchNamedReplicationSlot(const char *name)
 {
-	ReplicationSlot *slot;
-	int			active_pid;
 	int			i;
+	ReplicationSlot	*slot = NULL;
 
-retry:
-	Assert(MyReplicationSlot == NULL);
+	Assert(LWLockHeldByMeInMode(ReplicationSlotControlLock,
+								LW_SHARED));
 
-	/*
-	 * Search for the named slot and mark it active if we find it.  If the
-	 * slot is already active, we exit the loop with active_pid set to the PID
-	 * of the backend that owns it.
-	 */
-	active_pid = 0;
-	slot = NULL;
-	LWLockAcquire(ReplicationSlotControlLock, LW_SHARED);
 	for (i = 0; i < max_replication_slots; i++)
 	{
 		ReplicationSlot *s = &ReplicationSlotCtl->replication_slots[i];
 
 		if (s->in_use && strcmp(name, NameStr(s->data.name)) == 0)
 		{
-			/*
-			 * This is the slot we want; check if it's active under some other
-			 * process.  In single user mode, we don't need this check.
-			 */
-			if (IsUnderPostmaster)
-			{
-				/*
-				 * Get ready to sleep on it in case it is active.  (We may end
-				 * up not sleeping, but we don't want to do this while holding
-				 * the spinlock.)
-				 */
-				ConditionVariablePrepareToSleep(&s->active_cv);
-
-				SpinLockAcquire(&s->mutex);
-
-				active_pid = s->active_pid;
-				if (active_pid == 0)
-					active_pid = s->active_pid = MyProcPid;
-
-				SpinLockRelease(&s->mutex);
-			}
-			else
-				active_pid = MyProcPid;
 			slot = s;
-
 			break;
 		}
 	}
-	LWLockRelease(ReplicationSlotControlLock);
 
-	/* If we did not find the slot, error out. */
-	if (slot == NULL)
+	return slot;
+}
+
+/*
+ * Find a previously created slot and mark it as used by this process.
+ *
+ * The return value is only useful if behavior is SAB_Inquire, in which
+ * it's zero if we successfully acquired the slot, -1 if the slot no longer
+ * exists, or the PID of the owning process otherwise.  If behavior is
+ * SAB_Error, then trying to acquire an owned slot is an error.
+ * If SAB_Block, we sleep until the slot is released by the owning process.
+ */
+int
+ReplicationSlotAcquire(const char *name, SlotAcquireBehavior behavior)
+{
+	return ReplicationSlotAcquireInternal(NULL, name, behavior);
+}
+
+/*
+ * Mark the specified slot as used by this process.
+ *
+ * Only one of slot and name can be specified.
+ * If slot == NULL, search for the slot with the given name.
+ *
+ * See comments about the return value in ReplicationSlotAcquire().
+ */
+static int
+ReplicationSlotAcquireInternal(ReplicationSlot *slot, const char *name,
+							   SlotAcquireBehavior behavior)
+{
+	ReplicationSlot *s;
+	int			active_pid;
+
+	AssertArg((slot == NULL) ^ (name == NULL));
+
+retry:
+	Assert(MyReplicationSlot == NULL);
+
+	LWLockAcquire(ReplicationSlotControlLock, LW_SHARED);
+
+	/*
+	 * Search for the slot with the specified name if the slot to acquire is
+	 * not given. If the slot is not found, we either return -1 or error out.
+	 */
+	s = slot ? slot : SearchNamedReplicationSlot(name);
+	if (s == NULL || !s->in_use)
+	{
+		LWLockRelease(ReplicationSlotControlLock);
+
+		if (behavior == SAB_Inquire)
+			return -1;
 		ereport(ERROR,
 				(errcode(ERRCODE_UNDEFINED_OBJECT),
-				 errmsg("replication slot \"%s\" does not exist", name)));
+				 errmsg("replication slot \"%s\" does not exist",
+						name ? name : NameStr(slot->data.name))));
+	}
 
 	/*
-	 * If we found the slot but it's already active in another backend, we
-	 * either error out or retry after a short wait, as caller specified.
+	 * This is the slot we want; check if it's active under some other
+	 * process.  In single user mode, we don't need this check.
+	 */
+	if (IsUnderPostmaster)
+	{
+		/*
+		 * Get ready to sleep on the slot in case it is active if SAB_Block.
+		 * (We may end up not sleeping, but we don't want to do this while
+		 * holding the spinlock.)
+		 */
+		if (behavior == SAB_Block)
+			ConditionVariablePrepareToSleep(&s->active_cv);
+
+		SpinLockAcquire(&s->mutex);
+		if (s->active_pid == 0)
+			s->active_pid = MyProcPid;
+		active_pid = s->active_pid;
+		SpinLockRelease(&s->mutex);
+	}
+	else
+		active_pid = MyProcPid;
+	LWLockRelease(ReplicationSlotControlLock);
+
+	/*
+	 * If we found the slot but it's already active in another process, we
+	 * either error out, return the PID of the owning process, or retry
+	 * after a short wait, as caller specified.
 	 */
 	if (active_pid != MyProcPid)
 	{
@@ -400,24 +443,24 @@ retry:
 			ereport(ERROR,
 					(errcode(ERRCODE_OBJECT_IN_USE),
 					 errmsg("replication slot \"%s\" is active for PID %d",
-							name, active_pid)));
+							NameStr(s->data.name), active_pid)));
 		else if (behavior == SAB_Inquire)
 			return active_pid;
 
 		/* Wait here until we get signaled, and then restart */
-		ConditionVariableSleep(&slot->active_cv,
+		ConditionVariableSleep(&s->active_cv,
 							   WAIT_EVENT_REPLICATION_SLOT_DROP);
 		ConditionVariableCancelSleep();
 		goto retry;
 	}
-	else
-		ConditionVariableCancelSleep(); /* no sleep needed after all */
+	else if (behavior == SAB_Block)
+		ConditionVariableCancelSleep();	/* no sleep needed after all */
 
 	/* Let everybody know we've modified this slot */
-	ConditionVariableBroadcast(&slot->active_cv);
+	ConditionVariableBroadcast(&s->active_cv);
 
 	/* We made this slot active, so it's ours now. */
-	MyReplicationSlot = slot;
+	MyReplicationSlot = s;
 
 	/* success */
 	return 0;
@@ -1100,43 +1143,82 @@ restart:
 		ReplicationSlot *s = &ReplicationSlotCtl->replication_slots[i];
 		XLogRecPtr	restart_lsn = InvalidXLogRecPtr;
 		NameData	slotname;
+		int		wspid;
+		int		last_signaled_pid = 0;
 
 		if (!s->in_use)
 			continue;
 
 		SpinLockAcquire(&s->mutex);
-		if (s->data.restart_lsn == InvalidXLogRecPtr ||
-			s->data.restart_lsn >= oldestLSN)
-		{
-			SpinLockRelease(&s->mutex);
-			continue;
-		}
-
 		slotname = s->data.name;
 		restart_lsn = s->data.restart_lsn;
-
 		SpinLockRelease(&s->mutex);
+
+		if (XLogRecPtrIsInvalid(restart_lsn) || restart_lsn >= oldestLSN)
+			continue;
 		LWLockRelease(ReplicationSlotControlLock);
 
+		/* Get ready to sleep on the slot in case it is active */
+		ConditionVariablePrepareToSleep(&s->active_cv);
+
 		for (;;)
 		{
-			int			wspid = ReplicationSlotAcquire(NameStr(slotname),
-													   SAB_Inquire);
+			/*
+			 * Try to mark this slot as used by this process.
+			 *
+			 * Note that ReplicationSlotAcquireInternal(SAB_Inquire)
+			 * should not cancel the prepared condition variable
+			 * if this slot is active in other process. Because in this case
+			 * we have to wait on that CV for the process owning
+			 * the slot to be terminated, later.
+			 */
+			wspid = ReplicationSlotAcquireInternal(s, NULL, SAB_Inquire);
 
-			/* no walsender? success! */
-			if (wspid == 0)
+			/*
+			 * Exit the loop if we successfully acquired the slot or
+			 * the slot was dropped during waiting for the owning process
+			 * to be terminated. For example, the latter case is likely to
+			 * happen when the slot is temporary because it's automatically
+			 * dropped by the termination of the owning process.
+			 */
+			if (wspid <= 0)
 				break;
 
-			ereport(LOG,
-					(errmsg("terminating walsender %d because replication slot \"%s\" is too far behind",
-							wspid, NameStr(slotname))));
-			(void) kill(wspid, SIGTERM);
+			/*
+			 * Signal to terminate the process that owns the slot.
+			 *
+			 * There is the race condition where other process may own
+			 * the slot after the process using it was terminated and before
+			 * this process owns it. To handle this case, we signal again
+			 * if the PID of the owning process is changed than the last.
+			 *
+			 * XXX This logic assumes that the same PID is not reused
+			 * very quickly.
+			 */
+			if (last_signaled_pid != wspid)
+			{
+				ereport(LOG,
+						(errmsg("terminating process %d because replication slot \"%s\" is too far behind",
+								wspid, NameStr(slotname))));
+				(void) kill(wspid, SIGTERM);
+				last_signaled_pid = wspid;
+			}
 
 			ConditionVariableTimedSleep(&s->active_cv, 10,
 										WAIT_EVENT_REPLICATION_SLOT_DROP);
 		}
 		ConditionVariableCancelSleep();
 
+		/*
+		 * Do nothing here and start from scratch if the slot has
+		 * already been dropped.
+		 */
+		if (wspid == -1)
+		{
+			CHECK_FOR_INTERRUPTS();
+			goto restart;
+		}
+
 		ereport(LOG,
 				(errmsg("invalidating slot \"%s\" because its restart_lsn %X/%X exceeds max_slot_wal_keep_size",
 						NameStr(slotname),