Separate messages for standby replies and hot standby feedback.

Allow messages to be sent at different times, and greatly reduce
the frequency of hot standby feedback. Refactor to allow additional
message types.

src/backend/replication/walreceiver.c

@@ -95,6 +95,7 @@ static struct
 }	LogstreamResult;
 
 static StandbyReplyMessage	reply_message;
+static StandbyHSFeedbackMessage	feedback_message;
 
 /*
  * About SIGTERM handling:
@@ -123,6 +124,7 @@ static void XLogWalRcvProcessMsg(unsigned char type, char *buf, Size len);
 static void XLogWalRcvWrite(char *buf, Size nbytes, XLogRecPtr recptr);
 static void XLogWalRcvFlush(bool dying);
 static void XLogWalRcvSendReply(void);
+static void XLogWalRcvSendHSFeedback(void);
 
 /* Signal handlers */
 static void WalRcvSigHupHandler(SIGNAL_ARGS);
@@ -317,6 +319,7 @@ WalReceiverMain(void)
 
 			/* Let the master know that we received some data. */
 			XLogWalRcvSendReply();
+			XLogWalRcvSendHSFeedback();
 
 			/*
 			 * If we've written some records, flush them to disk and let the
@@ -331,6 +334,7 @@ WalReceiverMain(void)
 			 * the master anyway, to report any progress in applying WAL.
 			 */
 			XLogWalRcvSendReply();
+			XLogWalRcvSendHSFeedback();
 		}
 	}
 }
@@ -619,40 +623,82 @@ XLogWalRcvSendReply(void)
 	reply_message.apply = GetXLogReplayRecPtr();
 	reply_message.sendTime = now;
 
-	/*
-	 * Get the OldestXmin and its associated epoch
-	 */
-	if (hot_standby_feedback && HotStandbyActive())
-	{
-		TransactionId	nextXid;
-		uint32			nextEpoch;
-
-		reply_message.xmin = GetOldestXmin(true, false);
-
-		/*
-		 * Get epoch and adjust if nextXid and oldestXmin are different
-		 * sides of the epoch boundary.
-		 */
-		GetNextXidAndEpoch(&nextXid, &nextEpoch);
-		if (nextXid < reply_message.xmin)
-			nextEpoch--;
-		reply_message.epoch = nextEpoch;
-	}
-	else
-	{
-		reply_message.xmin = InvalidTransactionId;
-		reply_message.epoch = 0;
-	}
-
-	elog(DEBUG2, "sending write %X/%X flush %X/%X apply %X/%X xmin %u epoch %u",
+	elog(DEBUG2, "sending write %X/%X flush %X/%X apply %X/%X",
 				 reply_message.write.xlogid, reply_message.write.xrecoff,
 				 reply_message.flush.xlogid, reply_message.flush.xrecoff,
-				 reply_message.apply.xlogid, reply_message.apply.xrecoff,
-				 reply_message.xmin,
-				 reply_message.epoch);
+				 reply_message.apply.xlogid, reply_message.apply.xrecoff);
 
 	/* Prepend with the message type and send it. */
 	buf[0] = 'r';
 	memcpy(&buf[1], &reply_message, sizeof(StandbyReplyMessage));
 	walrcv_send(buf, sizeof(StandbyReplyMessage) + 1);
 }
+
+/*
+ * Send hot standby feedback message to primary, plus the current time,
+ * in case they don't have a watch.
+ */
+static void
+XLogWalRcvSendHSFeedback(void)
+{
+	char			buf[sizeof(StandbyHSFeedbackMessage) + 1];
+	TimestampTz		now;
+	TransactionId	nextXid;
+	uint32			nextEpoch;
+	TransactionId	xmin;
+
+	/*
+	 * If the user doesn't want status to be reported to the master, be sure
+	 * to exit before doing anything at all.
+	 */
+	if (!hot_standby_feedback)
+		return;
+
+	/* Get current timestamp. */
+	now = GetCurrentTimestamp();
+
+	/*
+	 * Send feedback at most once per wal_receiver_status_interval.
+	 */
+	if (!TimestampDifferenceExceeds(feedback_message.sendTime, now,
+			wal_receiver_status_interval * 1000))
+		return;
+
+	/*
+	 * If Hot Standby is not yet active there is nothing to send.
+	 * Check this after the interval has expired to reduce number of
+	 * calls.
+	 */
+	if (!HotStandbyActive())
+		return;
+
+	/*
+	 * Make the expensive call to get the oldest xmin once we are
+	 * certain everything else has been checked.
+	 */
+	xmin = GetOldestXmin(true, false);
+
+	/*
+	 * Get epoch and adjust if nextXid and oldestXmin are different
+	 * sides of the epoch boundary.
+	 */
+	GetNextXidAndEpoch(&nextXid, &nextEpoch);
+	if (nextXid < xmin)
+		nextEpoch--;
+
+	/*
+	 * Always send feedback message.
+	 */
+	feedback_message.sendTime = now;
+	feedback_message.xmin = xmin;
+	feedback_message.epoch = nextEpoch;
+
+	elog(DEBUG2, "sending hot standby feedback xmin %u epoch %u",
+				 feedback_message.xmin,
+				 feedback_message.epoch);
+
+	/* Prepend with the message type and send it. */
+	buf[0] = 'h';
+	memcpy(&buf[1], &feedback_message, sizeof(StandbyHSFeedbackMessage));
+	walrcv_send(buf, sizeof(StandbyHSFeedbackMessage) + 1);
+}

src/backend/replication/walsender.c

@@ -116,7 +116,9 @@ static void WalSndKill(int code, Datum arg);
 static bool XLogSend(char *msgbuf, bool *caughtup);
 static void IdentifySystem(void);
 static void StartReplication(StartReplicationCmd * cmd);
+static void ProcessStandbyMessage(void);
 static void ProcessStandbyReplyMessage(void);
+static void ProcessStandbyHSFeedbackMessage(void);
 static void ProcessRepliesIfAny(void);
 
 
@@ -456,42 +458,45 @@ ProcessRepliesIfAny(void)
 	unsigned char firstchar;
 	int			r;
 
-	r = pq_getbyte_if_available(&firstchar);
-	if (r < 0)
-	{
-		/* unexpected error or EOF */
-		ereport(COMMERROR,
-				(errcode(ERRCODE_PROTOCOL_VIOLATION),
-				 errmsg("unexpected EOF on standby connection")));
-		proc_exit(0);
-	}
-	if (r == 0)
+	for (;;)
 	{
-		/* no data available without blocking */
-		return;
-	}
+		r = pq_getbyte_if_available(&firstchar);
+		if (r < 0)
+		{
+			/* unexpected error or EOF */
+			ereport(COMMERROR,
+					(errcode(ERRCODE_PROTOCOL_VIOLATION),
+					 errmsg("unexpected EOF on standby connection")));
+			proc_exit(0);
+		}
+		if (r == 0)
+		{
+			/* no data available without blocking */
+			return;
+		}
 
-	/* Handle the very limited subset of commands expected in this phase */
-	switch (firstchar)
-	{
-			/*
-			 * 'd' means a standby reply wrapped in a CopyData packet.
-			 */
-		case 'd':
-			ProcessStandbyReplyMessage();
-			break;
+		/* Handle the very limited subset of commands expected in this phase */
+		switch (firstchar)
+		{
+				/*
+				 * 'd' means a standby reply wrapped in a CopyData packet.
+				 */
+			case 'd':
+				ProcessStandbyMessage();
+				break;
 
-			/*
-			 * 'X' means that the standby is closing down the socket.
-			 */
-		case 'X':
-			proc_exit(0);
+				/*
+				 * 'X' means that the standby is closing down the socket.
+				 */
+			case 'X':
+				proc_exit(0);
 
-		default:
-			ereport(FATAL,
-					(errcode(ERRCODE_PROTOCOL_VIOLATION),
-					 errmsg("invalid standby closing message type %d",
-							firstchar)));
+			default:
+				ereport(FATAL,
+						(errcode(ERRCODE_PROTOCOL_VIOLATION),
+						 errmsg("invalid standby closing message type %d",
+								firstchar)));
+		}
 	}
 }
 
@@ -499,11 +504,9 @@ ProcessRepliesIfAny(void)
  * Process a status update message received from standby.
  */
 static void
-ProcessStandbyReplyMessage(void)
+ProcessStandbyMessage(void)
 {
-	StandbyReplyMessage	reply;
 	char msgtype;
-	TransactionId newxmin = InvalidTransactionId;
 
 	resetStringInfo(&reply_message);
 
@@ -523,22 +526,39 @@ ProcessStandbyReplyMessage(void)
 	 * one type.
 	 */
 	msgtype = pq_getmsgbyte(&reply_message);
-	if (msgtype != 'r')
+
+	switch (msgtype)
 	{
-		ereport(COMMERROR,
-				(errcode(ERRCODE_PROTOCOL_VIOLATION),
-				 errmsg("unexpected message type %c", msgtype)));
-		proc_exit(0);
+		case 'r':
+			ProcessStandbyReplyMessage();
+			break;
+
+		case 'h':
+			ProcessStandbyHSFeedbackMessage();
+			break;
+
+		default:
+			ereport(COMMERROR,
+					(errcode(ERRCODE_PROTOCOL_VIOLATION),
+					 errmsg("unexpected message type %c", msgtype)));
+			proc_exit(0);
 	}
+}
+
+/*
+ * Regular reply from standby advising of WAL positions on standby server.
+ */
+static void
+ProcessStandbyReplyMessage(void)
+{
+	StandbyReplyMessage	reply;
 
 	pq_copymsgbytes(&reply_message, (char *) &reply, sizeof(StandbyReplyMessage));
 
-	elog(DEBUG2, "write %X/%X flush %X/%X apply %X/%X xmin %u epoch %u",
+	elog(DEBUG2, "write %X/%X flush %X/%X apply %X/%X",
 		 reply.write.xlogid, reply.write.xrecoff,
 		 reply.flush.xlogid, reply.flush.xrecoff,
-		 reply.apply.xlogid, reply.apply.xrecoff,
-		 reply.xmin,
-		 reply.epoch);
+		 reply.apply.xlogid, reply.apply.xrecoff);
 
 	/*
 	 * Update shared state for this WalSender process
@@ -554,6 +574,22 @@ ProcessStandbyReplyMessage(void)
 		walsnd->apply = reply.apply;
 		SpinLockRelease(&walsnd->mutex);
 	}
+}
+
+/*
+ * Hot Standby feedback
+ */
+static void
+ProcessStandbyHSFeedbackMessage(void)
+{
+	StandbyHSFeedbackMessage	reply;
+	TransactionId newxmin = InvalidTransactionId;
+
+	pq_copymsgbytes(&reply_message, (char *) &reply, sizeof(StandbyHSFeedbackMessage));
+
+	elog(DEBUG2, "hot standby feedback xmin %u epoch %u",
+		 reply.xmin,
+		 reply.epoch);
 
 	/*
 	 * Update the WalSender's proc xmin to allow it to be visible

src/include/replication/walprotocol.h

@@ -56,6 +56,18 @@ typedef struct
 	XLogRecPtr	flush;
 	XLogRecPtr	apply;
 
+	/* Sender's system clock at the time of transmission */
+	TimestampTz sendTime;
+} StandbyReplyMessage;
+
+/*
+ * Hot Standby feedback from standby (message type 'h').  This is wrapped within
+ * a CopyData message at the FE/BE protocol level.
+ *
+ * Note that the data length is not specified here.
+ */
+typedef struct
+{
 	/*
 	 * The current xmin and epoch from the standby, for Hot Standby feedback.
 	 * This may be invalid if the standby-side does not support feedback,
@@ -64,10 +76,9 @@ typedef struct
 	TransactionId	xmin;
 	uint32			epoch;
 
-
 	/* Sender's system clock at the time of transmission */
 	TimestampTz sendTime;
-} StandbyReplyMessage;
+} StandbyHSFeedbackMessage;
 
 /*
  * Maximum data payload in a WAL data message.	Must be >= XLOG_BLCKSZ.