FAQ 43.9 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031

                Frequently Asked Questions (FAQ) for PostgreSQL
                                       
   Last updated: Tue Oct 17 00:21:20 EDT 2000
   
   Current maintainer: Bruce Momjian (pgman@candle.pha.pa.us)
   
   The most recent version of this document can be viewed at
   http://www.PostgreSQL.org/docs/faq-english.html.
   
   Platform-specific questions are answered at
   http://www.PostgreSQL.org/docs/.
     _________________________________________________________________
   
                             General Questions
                                      
   1.1) What is PostgreSQL?
   1.2) What's the copyright on PostgreSQL?
   1.3) What Unix platforms does PostgreSQL run on?
   1.4) What non-unix ports are available?
   1.5) Where can I get PostgreSQL?
   1.6) Where can I get support?
   1.7) What is the latest release?
   1.8) What documentation is available?
   1.9) How do I find out about known bugs or missing features?
   1.10) How can I learn SQL?
   1.11) Is PostgreSQL Y2K compliant?
   1.12) How do I join the development team?
   1.13) How do I submit a bug report?
   1.14) How does PostgreSQL compare to other DBMS's?
   
                           User Client Questions
                                      
   2.1) Are there ODBC drivers for PostgreSQL?
   2.2) What tools are available for hooking PostgreSQL to Web pages?
   2.3) Does PostgreSQL have a graphical user interface? A report
   generator? An embedded query language interface?
   2.4) What languages are available to communicate with PostgreSQL?
   
                          Administrative Questions
                                      
   3.1) Why does initdb fail?
   3.2) How do I install PostgreSQL somewhere other than
   /usr/local/pgsql?
   3.3) When I start the postmaster, I get a Bad System Call or core
   dumped message. Why?
   3.4) When I try to start the postmaster, I get IpcMemoryCreate errors.
   Why?
   3.5) When I try to start the postmaster, I get IpcSemaphoreCreate
   errors. Why?
   3.6) How do I prevent other hosts from accessing my PostgreSQL
   database?
   3.7) Why can't I connect to my database from another machine?
   3.8) Why can't I access the database as the root user?
   3.9) All my servers crash under concurrent table access. Why?
   3.10) How do I tune the database engine for better performance?
   3.11) What debugging features are available?
   3.12) I get "Sorry, too many clients" when trying to connect. Why?
   3.13) What are the pg_sorttempNNN.NN files in my database directory?
   
                           Operational Questions
                                      
   4.1) Why is the system confused about commas, decimal points, and date
   formats.
   4.2) What is the exact difference between binary cursors and normal
   cursors?
   4.3) How do I SELECT only the first few rows of a query?
   4.4) How do I get a list of tables or other things I can see in psql?
   4.5) How do you remove a column from a table?
   4.6) What is the maximum size for a row, table, database?
   4.7) How much database disk space is required to store data from a
   typical text file?
   4.8) How do I find out what indices or operations are defined in the
   database?
   4.9) My queries are slow or don't make use of the indexes. Why?
   4.10) How do I see how the query optimizer is evaluating my query?
   4.11) What is an R-tree index?
   4.12) What is Genetic Query Optimization?
   4.13) How do I do regular expression searches and case-insensitive
   regular expression searches?
   4.14) In a query, how do I detect if a field is NULL?
   4.15) What is the difference between the various character types?
   4.16.1) How do I create a serial/auto-incrementing field?
   4.16.2) How do I get the value of a SERIAL insert?
   4.16.3) Don't currval() and nextval() lead to a race condition with
   other users?
   4.17) What is an OID? What is a TID?
   4.18) What is the meaning of some of the terms used in PostgreSQL?
   4.19) Why do I get the error "FATAL: palloc failure: memory
   exhausted?"
   4.20) How do I tell what PostgreSQL version I am running?
   4.21) My large-object operations get invalid large obj descriptor.
   Why?
   4.22) How do I create a column that will default to the current time?
   4.23) Why are my subqueries using IN so slow?
   4.24) How do I do an outer join?
   
                            Extending PostgreSQL
                                      
   5.1) I wrote a user-defined function. When I run it in psql, why does
   it dump core?
   5.2) What does the message "NOTICE:PortalHeapMemoryFree: 0x402251d0
   not in alloc set!" mean?
   5.3) How can I contribute some nifty new types and functions to
   PostgreSQL?
   5.4) How do I write a C function to return a tuple?
   5.5) I have changed a source file. Why does the recompile not see the
   change?
     _________________________________________________________________
   
                             General Questions
                                      
    1.1) What is PostgreSQL?
    
   PostgreSQL is an enhancement of the POSTGRES database management
   system, a next-generation DBMS research prototype. While PostgreSQL
   retains the powerful data model and rich data types of POSTGRES, it
   replaces the PostQuel query language with an extended subset of SQL.
   PostgreSQL is free and the complete source is available.
   
   PostgreSQL development is performed by a team of Internet developers
   who all subscribe to the PostgreSQL development mailing list. The
   current coordinator is Marc G. Fournier (scrappy@PostgreSQL.org). (See
   below on how to join). This team is now responsible for all
   development of PostgreSQL.
   
   The authors of PostgreSQL 1.01 were Andrew Yu and Jolly Chen. Many
   others have contributed to the porting, testing, debugging, and
   enhancement of the code. The original Postgres code, from which
   PostgreSQL is derived, was the effort of many graduate students,
   undergraduate students, and staff programmers working under the
   direction of Professor Michael Stonebraker at the University of
   California, Berkeley.
   
   The original name of the software at Berkeley was Postgres. When SQL
   functionality was added in 1995, its name was changed to Postgres95.
   The name was changed at the end of 1996 to PostgreSQL.
   
   It is pronounced Post-Gres-Q-L.
   
    1.2) What's the copyright on PostgreSQL?
    
   PostgreSQL is subject to the following COPYRIGHT:
   
   PostgreSQL Data Base Management System
   
   Portions copyright (c) 1996-2000, PostgreSQL, Inc Portions Copyright
   (c) 1994-6 Regents of the University of California
   
   Permission to use, copy, modify, and distribute this software and its
   documentation for any purpose, without fee, and without a written
   agreement is hereby granted, provided that the above copyright notice
   and this paragraph and the following two paragraphs appear in all
   copies.
   
   IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY
   FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
   INCLUDING LOST PROFITS, ARISING OUT OF THE USE OF THIS SOFTWARE AND
   ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN
   ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   
   THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE
   PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND THE UNIVERSITY OF
   CALIFORNIA HAS NO OBLIGATIONS TO PROVIDE MAINTENANCE, SUPPORT,
   UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
   
    1.3) What Unix platforms does PostgreSQL run on?
    
   The authors have compiled and tested PostgreSQL on the following
   platforms (some of these compiles require gcc):
     * aix - IBM on AIX 3.2.5 or 4.x
     * alpha - DEC Alpha AXP on Digital Unix 2.0, 3.2, 4.0
     * BSD44_derived - OSs derived from 4.4-lite BSD (NetBSD, FreeBSD)
     * bsdi - BSD/OS 2.x, 3.x, 4.x
     * dgux - DG/UX 5.4R4.11
     * hpux - HP PA-RISC on HP-UX 9.*, 10.*
     * i386_solaris - i386 Solaris
     * irix5 - SGI MIPS on IRIX 5.3
     * linux - Intel i86 Alpha SPARC PPC M68k
     * sco - SCO 3.2v5 Unixware
     * sparc_solaris - SUN SPARC on Solaris 2.4, 2.5, 2.5.1
     * sunos4 - SUN SPARC on SunOS 4.1.3
     * svr4 - Intel x86 on Intel SVR4 and MIPS
     * ultrix4 - DEC MIPS on Ultrix 4.4
       
    1.4) What non-unix ports are available?
    
   It is possible to compile the libpq C library, psql, and other
   interfaces and binaries to run on MS Windows platforms. In this case,
   the client is running on MS Windows, and communicates via TCP/IP to a
   server running on one of our supported Unix platforms.
   
   A file win31.mak is included in the distribution for making a Win32
   libpq library and psql.
   
   The database server is now working on Windows NT using Cygwin, the
   Cygnus Unix/NT porting library. See pgsql/doc/FAQ_NT in the
   distribution. It does not work on MS Windows 9X because Cygwin does
   not support the features we need on those platforms.
   
    1.5) Where can I get PostgreSQL?
    
   The primary anonymous ftp site for PostgreSQL is
   ftp://ftp.PostgreSQL.org/pub. For mirror sites, see our main Web site.
   
    1.6) Where can I get support?
    
   There is no support for PostgreSQL from the University of California,
   Berkeley. It is maintained through volunteer effort.
   
   The main mailing list is: pgsql-general@PostgreSQL.org. It is
   available for discussion of matters pertaining to PostgreSQL. To
   subscribe, send mail with the following lines in the body (not the
   subject line)
        subscribe
        end

   to pgsql-general-request@PostgreSQL.org.
   
   There is also a digest list available. To subscribe to this list, send
   email to: pgsql-general-digest-request@PostgreSQL.org with a body of:
        subscribe
        end

   Digests are sent out to members of this list whenever the main list
   has received around 30k of messages.
   
   The bugs mailing list is available. To subscribe to this list, send
   email to pgsql-bugs-request@PostgreSQL.org with a body of:
   
        subscribe
        end

   There is also a developers discussion mailing list available. To
   subscribe to this list, send email to
   pgsql-hackers-request@PostgreSQL.org with a body of:
   
        subscribe
        end

   Additional mailing lists and information about PostgreSQL can be found
   via the PostgreSQL WWW home page at:
   
     http://www.PostgreSQL.org
     
   There is also an IRC channel on EFNet, channel #PostgreSQL. I use the
   unix command irc -c '#PostgreSQL' "$USER" irc.phoenix.net.
   
   Commercial support for PostgreSQL is available at
   http://www.pgsql.com/.
   
    1.7) What is the latest release?
    
   The latest release of PostgreSQL is version 7.0.2.
   
   We plan to have major releases every four months.
   
    1.8) What documentation is available?
    
   Several manuals, manual pages, and some small test examples are
   included in the distribution. See the /doc directory. You can also
   browse the manual online at http://www.PostgreSQL.org/docs/postgres.
   
   There is a PostgreSQL book available at
   http://www.PostgreSQL.org/docs/awbook.html.
   
   psql has some nice \d commands to show information about types,
   operators, functions, aggregates, etc.
   
   Our Web site contains even more documentation.
   
    1.9) How do I find out about known bugs or missing features?
    
   PostgreSQL supports an extended subset of SQL-92. See our TODO list
   for known bugs, missing features, and future plans.
   
    1.10) How can I learn SQL?
    
   The PostgreSQL book at http://www.PostgreSQL.org/docs/awbook.html
   teaches SQL. There is a nice tutorial at
   http://w3.one.net/~jhoffman/sqltut.htm and at
   http://ourworld.compuserve.com/homepages/graeme_birchall/HTM_COOK.HTM.
   
   Another one is "Teach Yourself SQL in 21 Days, Second Edition" at
   http://members.tripod.com/er4ebus/sql/index.htm 
   
   Many of our users like The Practical SQL Handbook, Bowman, Judith S.,
   et al., Addison-Wesley. Others like The Complete Reference SQL, Groff
   et al., McGraw-Hill.
   
    1.11) Is PostgreSQL Y2K compliant?
    
   Yes, we easily handle dates past the year 2000AD, and before 2000BC.
   
    1.12) How do I join the development team?
    
   First, download the latest source and read the PostgreSQL Developers
   documentation on our Web site, or in the distribution. Second,
   subscribe to the pgsql-hackers and pgsql-patches mailing lists. Third,
   submit high-quality patches to pgsql-patches.
   
   There are about a dozen people who have commit privileges to the
   PostgreSQL CVS archive. They each have submitted so many high-quality
   patches that it was impossible for the existing committers to keep up,
   and we had confidence that patches they committed were of high
   quality.
   
    1.13) How do I submit a bug report?
    
   Fill out the "bug-template" file and send it to:
   pgsql-bugs@PostgreSQL.org
   
   Also check out our ftp site ftp://ftp.PostgreSQL.org/pub to see if
   there is a more recent PostgreSQL version or patches.
   
    1.14) How does PostgreSQL compare to other DBMS's?
    
   There are several ways of measuring software: features, performance,
   reliability, support, and price.
   
   Features
          PostgreSQL has most features present in large commercial
          DBMS's, like transactions, subselects, triggers, views, foreign
          key referential integrity, and sophisticated locking. We have
          some features they don't have, like user-defined types,
          inheritance, rules, and multi-version concurrency control to
          reduce lock contention. We don't have outer joins, but are
          working on them.
          
   Performance
          PostgreSQL runs in two modes. Normal fsync mode flushes every
          completed transaction to disk, guaranteeing that if the OS
          crashes or loses power in the next few seconds, all your data
          is safely stored on disk. In this mode, we are slower than most
          commercial databases, partly because few of them do such
          conservative flushing to disk in their default modes. In
          no-fsync mode, we are usually faster than commercial databases,
          though in this mode, an OS crash could cause data corruption.
          We are working to provide an intermediate mode that suffers
          less performance overhead than full fsync mode, and will allow
          data integrity within 30 seconds of an OS crash.
          In comparison to MySQL or leaner database systems, we are
          slower on inserts/updates because we have transaction overhead.
          Of course, MySQL doesn't have any of the features mentioned in
          the Features section above. We are built for flexibility and
          features, though we continue to improve performance through
          profiling and source code analysis. There is an interesting Web
          page comparing PostgreSQL to MySQL at
          http://openacs.org/why-not-mysql.html
          We handle each user connection by creating a Unix process.
          Backend processes share data buffers and locking information.
          With multiple CPU's, multiple backends can easily run on
          different CPU's.
          
   Reliability
          We realize that a DBMS must be reliable, or it is worthless. We
          strive to release well-tested, stable code that has a minimum
          of bugs. Each release has at least one month of beta testing,
          and our release history shows that we can provide stable, solid
          releases that are ready for production use. We believe we
          compare favorably to other database software in this area.
          
   Support
          Our mailing list provides a large group of developers and users
          to help resolve any problems encountered. While we can not
          guarantee a fix, commercial DBMS's don't always supply a fix
          either. Direct access to developers, the user community,
          manuals, and the source code often make PostgreSQL support
          superior to other DBMS's. There is commercial per-incident
          support available for those who need it. (See support FAQ
          item.)
          
   Price
          We are free for all use, both commercial and non-commercial.
          You can add our code to your product with no limitations,
          except those outlined in our BSD-style license stated above.
     _________________________________________________________________
   
                           User Client Questions
                                      
    2.1) Are there ODBC drivers for PostgreSQL?
    
   There are two ODBC drivers available, PsqlODBC and OpenLink ODBC.
   
   PsqlODBC is included in the distribution. More information about it
   can be gotten from ftp://ftp.PostgreSQL.org/pub/odbc/.
   
   OpenLink ODBC can be gotten from http://www.openlinksw.com. It works
   with their standard ODBC client software so you'll have PostgreSQL
   ODBC available on every client platform they support (Win, Mac, Unix,
   VMS).
   
   They will probably be selling this product to people who need
   commercial-quality support, but a freeware version will always be
   available. Questions to postgres95@openlink.co.uk.
   
   See also the ODBC chapter of the Programmer's Guide.
   
    2.2) What tools are available for hooking PostgreSQL to Web pages?
    
   A nice introduction to Database-backed Web pages can be seen at:
   http://www.webtools.com
   
   There is also one at http://www.phone.net/home/mwm/hotlist/.
   
   For Web integration, PHP is an excellent interface. It is at
   http://www.php.net
   
   For complex cases, many use the Perl interface and CGI.pm.
   
   A WWW gateway based on WDB using Perl can be downloaded from
   http://www.eol.ists.ca/~dunlop/wdb-p95
   
    2.3) Does PostgreSQL have a graphical user interface? A report generator?
    An embedded query language interface?
    
   We have a nice graphical user interface called pgaccess, which is
   shipped as part of the distribution. Pgaccess also has a report
   generator. The Web page is http://www.flex.ro/pgaccess
   
   We also include ecpg, which is an embedded SQL query language
   interface for C.
   
    2.4) What languages are available to communicate with PostgreSQL?
    
   We have:
     * C (libpq)
     * C++ (libpq++)
     * Embedded C (ecpg)
     * Java (jdbc)
     * Perl (perl5)
     * ODBC (odbc)
     * Python (PyGreSQL)
     * TCL (libpgtcl)
     * C Easy API (libpgeasy)
     * Embedded HTML (PHP from http://www.php.net)
     _________________________________________________________________
   
                          Administrative Questions
                                      
    3.1) Why does initdb fail?
    
   Try these:
     * check that you don't have any of the previous version's binaries
       in your path
     * check to see that you have the proper paths set
     * check that the postgres user owns the proper files
       
   If you see an error message about oidvector, you definately have a
   version mismatch.
   
    3.2) How do I install PostgreSQL somewhere other than /usr/local/pgsql?
    
   The simplest way is to specify the --prefix option when running
   configure. If you forgot to do that, you can edit Makefile.global and
   change POSTGRESDIR accordingly, or create a Makefile.custom and define
   POSTGRESDIR there.
   
    3.3) When I start the postmaster, I get a Bad System Call or core dumped
    message. Why?
    
   It could be a variety of problems, but first check to see that you
   have System V extensions installed in your kernel. PostgreSQL requires
   kernel support for shared memory and semaphores.
   
    3.4) When I try to start the postmaster, I get IpcMemoryCreate errors. Why?
    
   You either do not have shared memory configured properly in your
   kernel or you need to enlarge the shared memory available in the
   kernel. The exact amount you need depends on your architecture and how
   many buffers and backend processes you configure for the postmaster.
   For most systems, with default numbers of buffers and processes, you
   need a minimum of ~1MB.
   
    3.5) When I try to start the postmaster, I get IpcSemaphoreCreate errors.
    Why?
    
   If the error message is IpcSemaphoreCreate: semget failed (No space
   left on device) then your kernel is not configured with enough
   semaphores. Postgres needs one semaphore per potential backend
   process. A temporary solution is to start the postmaster with a
   smaller limit on the number of backend processes. Use -N with a
   parameter less than the default of 32. A more permanent solution is to
   increase your kernel's SEMMNS and SEMMNI parameters.
   
   If the error message is something else, you might not have semaphore
   support configured in your kernel at all.
   
    3.6) How do I prevent other hosts from accessing my PostgreSQL database?
    
   By default, PostgreSQL only allows connections from the local machine
   using Unix domain sockets. Other machines will not be able to connect
   unless you add the -i flag to the postmaster, and enable host-based
   authentication by modifying the file $PGDATA/pg_hba.conf accordingly.
   This will allow TCP/IP connections.
   
    3.7) Why can't I connect to my database from another machine?
    
   The default configuration allows only unix domain socket connections
   from the local machine. To enable TCP/IP connections, make sure the
   postmaster has been started with the -i option, and add an appropriate
   host entry to the file pgsql/data/pg_hba.conf.
   
    3.8) Why can't I access the database as the root user?
    
   You should not create database users with user id 0 (root). They will
   be unable to access the database. This is a security precaution
   because of the ability of users to dynamically link object modules
   into the database engine.
   
    3.9) All my servers crash under concurrent table access. Why?
    
   This problem can be caused by a kernel that is not configured to
   support semaphores.
   
    3.10) How do I tune the database engine for better performance?
    
   Certainly, indices can speed up queries. The EXPLAIN command allows
   you to see how PostgreSQL is interpreting your query, and which
   indices are being used.
   
   If you are doing a lot of INSERTs, consider doing them in a large
   batch using the COPY command. This is much faster than individual
   INSERTS. Second, statements not in a BEGIN WORK/COMMIT transaction
   block are considered to be in their own transaction. Consider
   performing several statements in a single transaction block. This
   reduces the transaction overhead. Also consider dropping and
   recreating indices when making large data changes.
   
   There are several tuning options. You can disable fsync() by starting
   the postmaster with a -o -F option. This will prevent fsync()'s from
   flushing to disk after every transaction.
   
   You can also use the postmaster -B option to increase the number of
   shared memory buffers used by the backend processes. If you make this
   parameter too high, the postmaster may not start because you've
   exceeded your kernel's limit on shared memory space. Each buffer is 8K
   and the default is 64 buffers.
   
   You can also use the backend -S option to increase the maximum amount
   of memory used by the backend process for temporary sorts. The -S
   value is measured in kilobytes, and the default is 512 (ie, 512K).
   
   You can also use the CLUSTER command to group data in tables to match
   an index. See the CLUSTER manual page for more details.
   
    3.11) What debugging features are available?
    
   PostgreSQL has several features that report status information that
   can be valuable for debugging purposes.
   
   First, by running configure with the --enable-cassert option, many
   assert()'s monitor the progress of the backend and halt the program
   when something unexpected occurs.
   
   Both postmaster and postgres have several debug options available.
   First, whenever you start the postmaster, make sure you send the
   standard output and error to a log file, like:
        cd /usr/local/pgsql
        ./bin/postmaster >server.log 2>&1 &

   This will put a server.log file in the top-level PostgreSQL directory.
   This file contains useful information about problems or errors
   encountered by the server. Postmaster has a -d option that allows even
   more detailed information to be reported. The -d option takes a number
   that specifies the debug level. Be warned that high debug level values
   generate large log files.
   
   If the postmaster is not running, you can actually run the postgres
   backend from the command line, and type your SQL statement directly.
   This is recommended only for debugging purposes. Note that a newline
   terminates the query, not a semicolon. If you have compiled with
   debugging symbols, you can use a debugger to see what is happening.
   Because the backend was not started from the postmaster, it is not
   running in an identical environment and locking/backend interaction
   problems may not be duplicated.
   
   If the postmaster is running, start psql in one window, then find the
   PID of the postgres process used by psql. Use a debugger to attach to
   the postgres PID. You can set breakpoints in the debugger and issue
   queries from psql. If you are debugging postgres startup, you can set
   PGOPTIONS="-W n", then start psql. This will cause startup to delay
   for n seconds so you can attach with the debugger and trace through
   the startup sequence.
   
   The postgres program has -s, -A, and -t options that can be very
   useful for debugging and performance measurements.
   
   You can also compile with profiling to see what functions are taking
   execution time. The backend profile files will be deposited in the
   pgsql/data/base/dbname directory. The client profile file will be put
   in the client's current directory.
   
    3.12) I get 'Sorry, too many clients' when trying to connect. Why?
    
   You need to increase the postmaster's limit on how many concurrent
   backend processes it can start.
   
   In PostgreSQL 6.5 and up, the default limit is 32 processes. You can
   increase it by restarting the postmaster with a suitable -N value.
   With the default configuration you can set -N as large as 1024. If you
   need more, increase MAXBACKENDS in include/config.h and rebuild. You
   can set the default value of -N at configuration time, if you like,
   using configure's --with-maxbackends switch.
   
   Note that if you make -N larger than 32, you must also increase -B
   beyond its default of 64; -B must be at least twice -N, and probably
   should be more than that for best performance. For large numbers of
   backend processes, you are also likely to find that you need to
   increase various Unix kernel configuration parameters. Things to check
   include the maximum size of shared memory blocks, SHMMAX; the maximum
   number of semaphores, SEMMNS and SEMMNI; the maximum number of
   processes, NPROC; the maximum number of processes per user, MAXUPRC;
   and the maximum number of open files, NFILE and NINODE. The reason
   that PostgreSQL has a limit on the number of allowed backend processes
   is so your system won't run out of resources.
   
   In PostgreSQL versions prior to 6.5, the maximum number of backends
   was 64, and changing it required a rebuild after altering the
   MaxBackendId constant in include/storage/sinvaladt.h.
   
    3.13) What are the pg_sorttempNNN.NN files in my database directory?
    
   They are temporary files generated by the query executor. For example,
   if a sort needs to be done to satisfy an ORDER BY, and the sort
   requires more space than the backend's -S parameter allows, then
   temporary files are created to hold the extra data.
   
   The temporary files should be deleted automatically, but might not if
   a backend crashes during a sort. If you have no backends running at
   the time, it is safe to delete the pg_tempNNN.NN files.
     _________________________________________________________________
   
                           Operational Questions
                                      
    4.1) Why is system confused about commas, decimal points, and date formats.
    
   Check your locale configuration. PostgreSQL uses the locale setting of
   the user that ran the postmaster process. There are postgres and psql
   SET commands to control the date format. Set those accordingly for
   your operating environment.
   
    4.2) What is the exact difference between binary cursors and normal
    cursors?
    
   See the DECLARE manual page for a description.
   
    4.3) How do I SELECT only the first few rows of a query?
    
   See the FETCH manual page, or use SELECT ... LIMIT....
   
   The entire query may have to be evaluated, even if you only want the
   first few rows. Consider a query that has an ORDER BY. If there is an
   index that matches the ORDER BY, PostgreSQL may be able to evaluate
   only the first few records requested, or the entire query may have to
   be evaluated until the desired rows have been generated.
   
    4.4) How do I get a list of tables or other things I can see in psql?
    
   You can read the source code for psql in file
   pgsql/src/bin/psql/psql.c. It contains SQL commands that generate the
   output for psql's backslash commands. You can also start psql with the
   -E option so it will print out the queries it uses to execute the
   commands you give.
   
    4.5) How do you remove a column from a table?
    
   We do not support ALTER TABLE DROP COLUMN, but do this:
        SELECT ...  -- select all columns but the one you want to remove
        INTO TABLE new_table
        FROM old_table;
        DROP TABLE old_table;
        ALTER TABLE new_table RENAME TO old_table;

    4.6) What is the maximum size for a row, table, database?
    
   These are the limits:
Maximum size for a database?             unlimited (60GB databases exist)
Maximum size for a table?                unlimited on all operating systems
Maximum size for a row?                  8k, configurable to 32k
Maximum number of rows in a table?       unlimited
Maximum number of columns in a table?    unlimited
Maximum number of indexes on a table?    unlimited

   Of course, these are not actually unlimited, but limited to available
   disk space.
   
   To change the maximum row size, edit include/config.h and change
   BLCKSZ. To use attributes larger than 8K, you can also use the large
   object interface.
   
   The row length limit will be removed in 7.1.
   
    4.7) How much database disk space is required to store data from a typical
    text file?
    
   A PostgreSQL database may need six-and-a-half times the disk space
   required to store the data in a flat file.
   
   Consider a file of 300,000 lines with two integers on each line. The
   flat file is 2.4MB. The size of the PostgreSQL database file
   containing this data can be estimated at 14MB:
    36 bytes: each row header (approximate)
   + 8 bytes: two int fields @ 4 bytes each
   + 4 bytes: pointer on page to tuple
   ----------------------------------------
    48 bytes per row

   The data page size in PostgreSQL is 8192 bytes (8 KB), so:

   8192 bytes per page
   -------------------   =  171 rows per database page (rounded up)
     48 bytes per row

   300000 data rows
   --------------------  =  1755 database pages
      171 rows per page

1755 database pages * 8192 bytes per page  =  14,376,960 bytes (14MB)

   Indexes do not require as much overhead, but do contain the data that
   is being indexed, so they can be large also.
   
    4.8) How do I find out what indices or operations are defined in the
    database?
    
   psql has a variety of backslash commands to show such information. Use
   \? to see them.
   
   Also try the file pgsql/src/tutorial/syscat.source. It illustrates
   many of the SELECTs needed to get information from the database system
   tables.
   
    4.9) My queries are slow or don't make use of the indexes. Why?
    
   PostgreSQL does not automatically maintain statistics. VACUUM must be
   run to update the statistics. After statistics are updated, the
   optimizer knows how many rows in the table, and can better decide if
   it should use indices. Note that the optimizer does not use indices in
   cases when the table is small because a sequential scan would be
   faster.
   
   For column-specific optimization statistics, use VACUUM ANALYZE.
   VACUUM ANALYZE is important for complex multijoin queries, so the
   optimizer can estimate the number of rows returned from each table,
   and choose the proper join order. The backend does not keep track of
   column statistics on its own, so VACUUM ANALYZE must be run to collect
   them periodically.
   
   Indexes are usually not used for ORDER BY operations: a sequential
   scan followed by an explicit sort is faster than an indexscan of all
   tuples of a large table, because it takes fewer disk accesses.
   
   When using wild-card operators such as LIKE or ~, indices can only be
   used if the beginning of the search is anchored to the start of the
   string. So, to use indices, LIKE searches should not begin with %, and
   ~(regular expression searches) should start with ^.
   
    4.10) How do I see how the query optimizer is evaluating my query?
    
   See the EXPLAIN manual page.
   
    4.11) What is an R-tree index?
    
   An R-tree index is used for indexing spatial data. A hash index can't
   handle range searches. A B-tree index only handles range searches in a
   single dimension. R-tree's can handle multi-dimensional data. For
   example, if an R-tree index can be built on an attribute of type
   point, the system can more efficiently answer queries such as "select
   all points within a bounding rectangle."
   
   The canonical paper that describes the original R-tree design is:
   
   Guttman, A. "R-trees: A Dynamic Index Structure for Spatial
   Searching." Proc of the 1984 ACM SIGMOD Int'l Conf on Mgmt of Data,
   45-57.
   
   You can also find this paper in Stonebraker's "Readings in Database
   Systems".
   
   Built-in R-trees can handle polygons and boxes. In theory, R-trees can
   be extended to handle higher number of dimensions. In practice,
   extending R-trees requires a bit of work and we don't currently have
   any documentation on how to do it.
   
    4.12) What is Genetic Query Optimization?
    
   The GEQO module speeds query optimization when joining many tables by
   means of a Genetic Algorithm (GA). It allows the handling of large
   join queries through nonexhaustive search.
   
    4.13) How do I do regular expression searches and case-insensitive regular
    expression searches?
    
   The ~ operator does regular expression matching, and ~* does
   case-insensitive regular expression matching. There is no
   case-insensitive variant of the LIKE operator, but you can get the
   effect of case-insensitive LIKE with this:
        WHERE lower(textfield) LIKE lower(pattern)

    4.14) In a query, how do I detect if a field is NULL?
    
   You test the column with IS NULL and IS NOT NULL.
   
    4.15) What is the difference between the various character types?
    
Type            Internal Name   Notes
--------------------------------------------------
"char"          char            1 character
CHAR(#)         bpchar          blank padded to the specified fixed length
VARCHAR(#)      varchar         size specifies maximum length, no padding
TEXT            text            length limited only by maximum row length
BYTEA           bytea           variable-length array of bytes

   You will see the internal name when examining system catalogs and in
   some error messages.
   
   The last four types above are "varlena" types (i.e., the first four
   bytes are the length, followed by the data). char(#) allocates the
   maximum number of bytes no matter how much data is stored in the
   field. text, varchar(#), and bytea all have variable length on the
   disk, and because of this, there is a small performance penalty for
   using them. Specifically, the penalty is for access to all columns
   after the first column of this type.
   
    4.16.1) How do I create a serial/auto-incrementing field?
    
   PostgreSQL supports a SERIAL data type. It auto-creates a sequence and
   index on the column. For example, this:
        CREATE TABLE person (
                id   SERIAL,
                name TEXT
        );

   is automatically translated into this:
        CREATE SEQUENCE person_id_seq;
        CREATE TABLE person (
                id   INT4 NOT NULL DEFAULT nextval('person_id_seq'),
                name TEXT
        );
        CREATE UNIQUE INDEX person_id_key ON person ( id );

   See the create_sequence manual page for more information about
   sequences. You can also use each row's OID field as a unique value.
   However, if you need to dump and reload the database, you need to use
   pg_dump's -o option or COPY WITH OIDS option to preserve the OIDs.
   
   Numbering Rows.
   
    4.16.2) How do I get the value of a SERIAL insert?
    
   One approach is to to retrieve the next SERIAL value from the sequence
   object with the nextval() function before inserting and then insert it
   explicitly. Using the example table in 4.16.1, that might look like
   this:
        $newSerialID = nextval('person_id_seq');
        INSERT INTO person (id, name) VALUES ($newSerialID, 'Blaise Pascal');

   You would then also have the new value stored in $newSerialID for use
   in other queries (e.g., as a foreign key to the person table). Note
   that the name of the automatically created SEQUENCE object will be
   named <table>_<serialcolumn>_seq, where table and serialcolumn are the
   names of your table and your SERIAL column, respectively.
   
   Alternatively, you could retrieve the assigned SERIAL value with the
   currval() function after it was inserted by default, e.g.,
        INSERT INTO person (name) VALUES ('Blaise Pascal');
        $newID = currval('person_id_seq');

   Finally, you could use the OID returned from the INSERT statement to
   look up the default value, though this is probably the least portable
   approach. In Perl, using DBI with Edmund Mergl's DBD::Pg module, the
   oid value is made available via $sth->{pg_oid_status} after
   $sth->execute().
   
    4.16.3) Don't currval() and nextval() lead to a race condition with other
    users?
    
   No. This is handled by the backends.
   
    4.17) What is an OID? What is a TID?
    
   OIDs are PostgreSQL's answer to unique row ids. Every row that is
   created in PostgreSQL gets a unique OID. All OIDs generated during
   initdb are less than 16384 (from backend/access/transam.h). All
   user-created OIDs are equal to or greater than this. By default, all
   these OIDs are unique not only within a table or database, but unique
   within the entire PostgreSQL installation.
   
   PostgreSQL uses OIDs in its internal system tables to link rows
   between tables. These OIDs can be used to identify specific user rows
   and used in joins. It is recommended you use column type OID to store
   OID values. You can create an index on the OID field for faster
   access.
   
   Oids are assigned to all new rows from a central area that is used by
   all databases. If you want to change the OID to something else, or if
   you want to make a copy of the table, with the original OID's, there
   is no reason you can't do it:
        CREATE TABLE new_table(old_oid oid, mycol int);
        SELECT old_oid, mycol INTO new FROM old;
        COPY new TO '/tmp/pgtable';
        DELETE FROM new;
        COPY new WITH OIDS FROM '/tmp/pgtable';

   OIDs are stored as 4-byte integers, and will overflow at 4 billion. No
   one has reported this ever happening, and we plan to have the limit
   removed before anyone does.
   
   TIDs are used to identify specific physical rows with block and offset
   values. Tids change after rows are modified or reloaded. They are used
   by index entries to point to physical rows.
   
    4.18) What is the meaning of some of the terms used in PostgreSQL?
    
   Some of the source code and older documentation use terms that have
   more common usage. Here are some:
     * table, relation, class
     * row, record, tuple
     * column, field, attribute
     * retrieve, select
     * replace, update
     * append, insert
     * OID, serial value
     * portal, cursor
     * range variable, table name, table alias
       
   A list of general database terms can be found at:
   http://www.comptechnews.com/~reaster/dbdesign.html
   
    4.19) Why do I get the error "FATAL: palloc failure: memory exhausted?"
    
   It is possible you have run out of virtual memory on your system, or
   your kernel has a low limit for certain resources. Try this before
   starting the postmaster:
        ulimit -d 65536
        limit datasize 64m

   Depending on your shell, only one of these may succeed, but it will
   set your process data segment limit much higher and perhaps allow the
   query to complete. This command applies to the current process, and
   all subprocesses created after the command is run. If you are having a
   problem with the SQL client because the backend is returning too much
   data, try it before starting the client.
   
    4.20) How do I tell what PostgreSQL version I am running?
    
   From psql, type select version();
   
    4.21) My large-object operations get invalid large obj descriptor. Why?
    
   You need to put BEGIN WORK and COMMIT around any use of a large object
   handle, that is, surrounding lo_open ... lo_close.
   
   Currently PostgreSQL enforces the rule by closing large object handles
   at transaction commit. So the first attempt to do anything with the
   handle will draw invalid large obj descriptor. So code that used to
   work (at least most of the time) will now generate that error message
   if you fail to use a transaction.
   
   If you are using a client interface like ODBC you may need to set
   auto-commit off.
   
    4.22) How do I create a column that will default to the current time?
    
   Use now():
        CREATE TABLE test (x int, modtime timestamp DEFAULT now() );

    4.23) Why are my subqueries using IN so slow?
    
   Currently, we join subqueries to outer queries by sequentially
   scanning the result of the subquery for each row of the outer query. A
   workaround is to replace IN with EXISTS:
        SELECT *
        FROM tab
        WHERE col1 IN (SELECT col2 FROM TAB2)

   to:
        SELECT *
        FROM tab
        WHERE EXISTS (SELECT col2 FROM TAB2 WHERE col1 = col2)

   We hope to fix this limitation in a future release.
   
    4.24) How do I do an outer join?
    
   PostgreSQL does not support outer joins in the current release. They
   can be simulated using UNION and NOT IN. For example, when joining
   tab1 and tab2, the following query does an outer join of the two
   tables:
        SELECT tab1.col1, tab2.col2
        FROM tab1, tab2
        WHERE tab1.col1 = tab2.col1
        UNION ALL
        SELECT tab1.col1, NULL
        FROM tab1
        WHERE tab1.col1 NOT IN (SELECT tab2.col1 FROM tab2)
        ORDER BY tab1.col1
     _________________________________________________________________
   
                            Extending PostgreSQL
                                      
    5.1) I wrote a user-defined function. When I run it in psql, why does it
    dump core?
    
   The problem could be a number of things. Try testing your user-defined
   function in a stand-alone test program first.
   
    5.2) What does the message "NOTICE:PortalHeapMemoryFree: 0x402251d0 not in
    alloc set!" mean?
    
   You are pfree'ing something that was not palloc'ed. Beware of mixing
   malloc/free and palloc/pfree.
   
    5.3) How can I contribute some nifty new types and functions to PostgreSQL?
    
   Send your extensions to the pgsql-hackers mailing list, and they will
   eventually end up in the contrib/ subdirectory.
   
    5.4) How do I write a C function to return a tuple?
    
   This requires wizardry so extreme that the authors have never tried
   it, though in principle it can be done.
   
    5.5) I have changed a source file. Why does the recompile not see the
    change?
    
   The Makefiles do not have the proper dependencies for include files.
   You have to do a make clean and then another make.