Skip to content

A
Anomaly_detection_and_recommender_system
You need to sign in or sign up before continuing.
Commit 2f2dbe24 authored by RACHIT BANSAL's avatar RACHIT BANSAL
Browse files
Options

added for verification

parents
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1392 additions and 0 deletions
.DS_Store 0 → 100644
View file @ 2f2dbe24
File added
Anomaly Detection and Recommender Systems/checkCostFunction.m 0 → 100755
View file @ 2f2dbe24
function checkCostFunction(lambda)
%CHECKCOSTFUNCTION Creates a collaborative filering problem
%to check your cost function and gradients
% CHECKCOSTFUNCTION(lambda) Creates a collaborative filering problem
% to check your cost function and gradients, it will output the
% analytical gradients produced by your code and the numerical gradients
% (computed using computeNumericalGradient). These two gradient
% computations should result in very similar values.
% Set lambda
if ~exist('lambda', 'var') || isempty(lambda)
lambda = 0;
end
%% Create small problem
X_t = rand(4, 3);
Theta_t = rand(5, 3);
% Zap out most entries
Y = X_t * Theta_t';
Y(rand(size(Y)) > 0.5) = 0;
R = zeros(size(Y));
R(Y ~= 0) = 1;
%% Run Gradient Checking
X = randn(size(X_t));
Theta = randn(size(Theta_t));
num_users = size(Y, 2);
num_movies = size(Y, 1);
num_features = size(Theta_t, 2);
numgrad = computeNumericalGradient( ...
@(t) cofiCostFunc(t, Y, R, num_users, num_movies, ...
num_features, lambda), [X(:); Theta(:)]);
[cost, grad] = cofiCostFunc([X(:); Theta(:)], Y, R, num_users, ...
num_movies, num_features, lambda);
disp([numgrad grad]);
fprintf(['The above two columns you get should be very similar.\n' ...
'(Left-Your Numerical Gradient, Right-Analytical Gradient)\n\n']);
diff = norm(numgrad-grad)/norm(numgrad+grad);
fprintf(['If your cost function implementation is correct, then \n' ...
'the relative difference will be small (less than 1e-9). \n' ...
'\nRelative Difference: %g\n'], diff);
end
\ No newline at end of file
Anomaly Detection and Recommender Systems/cofiCostFunc.m 0 → 100755
View file @ 2f2dbe24
function [J, grad] = cofiCostFunc(params, Y, R, num_users, num_movies, ...
num_features, lambda)
%COFICOSTFUNC Collaborative filtering cost function
% [J, grad] = COFICOSTFUNC(params, Y, R, num_users, num_movies, ...
% num_features, lambda) returns the cost and gradient for the
% collaborative filtering problem.
%
% Unfold the U and W matrices from params
X = reshape(params(1:num_movies*num_features), num_movies, num_features);
Theta = reshape(params(num_movies*num_features+1:end), ...
num_users, num_features);
% You need to return the following values correctly
J = 0;
X_grad = zeros(size(X));
Theta_grad = zeros(size(Theta));
% ====================== YOUR CODE HERE ======================
% Instructions: Compute the cost function and gradient for collaborative
% filtering. Concretely, you should first implement the cost
% function (without regularization) and make sure it is
% matches our costs. After that, you should implement the
% gradient and use the checkCostFunction routine to check
% that the gradient is correct. Finally, you should implement
% regularization.
%
% Notes: X - num_movies x num_features matrix of movie features
% Theta - num_users x num_features matrix of user features
% Y - num_movies x num_users matrix of user ratings of movies
% R - num_movies x num_users matrix, where R(i, j) = 1 if the
% i-th movie was rated by the j-th user
%
% You should set the following variables correctly:
%
% X_grad - num_movies x num_features matrix, containing the
% partial derivatives w.r.t. to each element of X
% Theta_grad - num_users x num_features matrix, containing the
% partial derivatives w.r.t. to each element of Theta
%
J=sum(sum(((X*(Theta')-Y).^2).*R))/2+lambda*(sum(sum(Theta.^2)))/2 +lambda*(sum(sum(X.^2)))/2;
for i=1:num_movies
idx = find(R(i, :)==1);
Thetatemp = Theta(idx, :);
Ytemp = Y(i, idx);
X_grad(i, :) = (X(i, :) * (Thetatemp') - Ytemp) * Thetatemp;
end
for i=1:num_users
idx = find(R(:,i)==1);
Xtemp = X(idx, :);
Ytemp = Y(idx, i);
Theta_grad(i, :) = (Theta(i, :) * (Xtemp') - Ytemp') * Xtemp;
end
X_grad=X_grad+lambda.*X;
Theta_grad=Theta_grad+lambda.*Theta;
% =============================================================
grad = [X_grad(:); Theta_grad(:)];
end
Anomaly Detection and Recommender Systems/computeNumericalGradient.m 0 → 100755
View file @ 2f2dbe24
function numgrad = computeNumericalGradient(J, theta)
%COMPUTENUMERICALGRADIENT Computes the gradient using "finite differences"
%and gives us a numerical estimate of the gradient.
% numgrad = COMPUTENUMERICALGRADIENT(J, theta) computes the numerical
% gradient of the function J around theta. Calling y = J(theta) should
% return the function value at theta.
% Notes: The following code implements numerical gradient checking, and
% returns the numerical gradient.It sets numgrad(i) to (a numerical
% approximation of) the partial derivative of J with respect to the
% i-th input argument, evaluated at theta. (i.e., numgrad(i) should
% be the (approximately) the partial derivative of J with respect
% to theta(i).)
%
numgrad = zeros(size(theta));
perturb = zeros(size(theta));
e = 1e-4;
for p = 1:numel(theta)
% Set perturbation vector
perturb(p) = e;
loss1 = J(theta - perturb);
loss2 = J(theta + perturb);
% Compute Numerical Gradient
numgrad(p) = (loss2 - loss1) / (2*e);
perturb(p) = 0;
end
end
Anomaly Detection and Recommender Systems/estimateGaussian.m 0 → 100755
View file @ 2f2dbe24
function [mu sigma2] = estimateGaussian(X)
%ESTIMATEGAUSSIAN This function estimates the parameters of a
%Gaussian distribution using the data in X
% [mu sigma2] = estimateGaussian(X),
% The input X is the dataset with each n-dimensional data point in one row
% The output is an n-dimensional vector mu, the mean of the data set
% and the variances sigma^2, an n x 1 vector
%
% Useful variables
[m, n] = size(X);
% You should return these values correctly
mu = zeros(n, 1);
sigma2 = zeros(n, 1);
% ====================== YOUR CODE HERE ======================
% Instructions: Compute the mean of the data and the variances
% In particular, mu(i) should contain the mean of
% the data for the i-th feature and sigma2(i)
% should contain variance of the i-th feature.
%
mu=(sum(X))'/m;
for i=1:n
for j=1:m
sigma2(i)=sigma2(i)+ (X(j,i)-mu(i)).^2;
end
end
sigma2=sigma2/m;
% =============================================================
end
Anomaly Detection and Recommender Systems/ex8.m 0 → 100755
View file @ 2f2dbe24
%% Machine Learning Online Class
% Exercise 8 | Anomaly Detection and Collaborative Filtering
%
% Instructions
% ------------
%
% This file contains code that helps you get started on the
% exercise. You will need to complete the following functions:
%
% estimateGaussian.m
% selectThreshold.m
% cofiCostFunc.m
%
% For this exercise, you will not need to change any code in this file,
% or any other files other than those mentioned above.
%
%% Initialization
clear ; close all; clc
%% ================== Part 1: Load Example Dataset ===================
% We start this exercise by using a small dataset that is easy to
% visualize.
%
% Our example case consists of 2 network server statistics across
% several machines: the latency and throughput of each machine.
% This exercise will help us find possibly faulty (or very fast) machines.
%
fprintf('Visualizing example dataset for outlier detection.\n\n');
% The following command loads the dataset. You should now have the
% variables X, Xval, yval in your environment
load('ex8data1.mat');
% Visualize the example dataset
plot(X(:, 1), X(:, 2), 'bx');
axis([0 30 0 30]);
xlabel('Latency (ms)');
ylabel('Throughput (mb/s)');
fprintf('Program paused. Press enter to continue.\n');
pause
%% ================== Part 2: Estimate the dataset statistics ===================
% For this exercise, we assume a Gaussian distribution for the dataset.
%
% We first estimate the parameters of our assumed Gaussian distribution,
% then compute the probabilities for each of the points and then visualize
% both the overall distribution and where each of the points falls in
% terms of that distribution.
%
fprintf('Visualizing Gaussian fit.\n\n');
% Estimate my and sigma2
[mu sigma2] = estimateGaussian(X);
% Returns the density of the multivariate normal at each data point (row)
% of X
p = multivariateGaussian(X, mu, sigma2);
% Visualize the fit
visualizeFit(X, mu, sigma2);
xlabel('Latency (ms)');
ylabel('Throughput (mb/s)');
fprintf('Program paused. Press enter to continue.\n');
pause;
%% ================== Part 3: Find Outliers ===================
% Now you will find a good epsilon threshold using a cross-validation set
% probabilities given the estimated Gaussian distribution
%
pval = multivariateGaussian(Xval, mu, sigma2);
[epsilon F1] = selectThreshold(yval, pval);
fprintf('Best epsilon found using cross-validation: %e\n', epsilon);
fprintf('Best F1 on Cross Validation Set: %f\n', F1);
fprintf(' (you should see a value epsilon of about 8.99e-05)\n');
fprintf(' (you should see a Best F1 value of 0.875000)\n\n');
% Find the outliers in the training set and plot the
outliers = find(p < epsilon);
% Draw a red circle around those outliers
hold on
plot(X(outliers, 1), X(outliers, 2), 'ro', 'LineWidth', 2, 'MarkerSize', 10);
hold off
fprintf('Program paused. Press enter to continue.\n');
pause;
%% ================== Part 4: Multidimensional Outliers ===================
% We will now use the code from the previous part and apply it to a
% harder problem in which more features describe each datapoint and only
% some features indicate whether a point is an outlier.
%
% Loads the second dataset. You should now have the
% variables X, Xval, yval in your environment
load('ex8data2.mat');
% Apply the same steps to the larger dataset
[mu sigma2] = estimateGaussian(X);
% Training set
p = multivariateGaussian(X, mu, sigma2);
% Cross-validation set
pval = multivariateGaussian(Xval, mu, sigma2);
% Find the best threshold
[epsilon F1] = selectThreshold(yval, pval);
fprintf('Best epsilon found using cross-validation: %e\n', epsilon);
fprintf('Best F1 on Cross Validation Set: %f\n', F1);
fprintf(' (you should see a value epsilon of about 1.38e-18)\n');
fprintf(' (you should see a Best F1 value of 0.615385)\n');
fprintf('# Outliers found: %d\n\n', sum(p < epsilon));
Anomaly Detection and Recommender Systems/ex8_cofi.m 0 → 100755
View file @ 2f2dbe24
%% Machine Learning Online Class
% Exercise 8 | Anomaly Detection and Collaborative Filtering
%
% Instructions
% ------------
%
% This file contains code that helps you get started on the
% exercise. You will need to complete the following functions:
%
% estimateGaussian.m
% selectThreshold.m
% cofiCostFunc.m
%
% For this exercise, you will not need to change any code in this file,
% or any other files other than those mentioned above.
%
%% =============== Part 1: Loading movie ratings dataset ================
% You will start by loading the movie ratings dataset to understand the
% structure of the data.
%
fprintf('Loading movie ratings dataset.\n\n');
% Load data
load ('ex8_movies.mat');
% Y is a 1682x943 matrix, containing ratings (1-5) of 1682 movies on
% 943 users
%
% R is a 1682x943 matrix, where R(i,j) = 1 if and only if user j gave a
% rating to movie i
% From the matrix, we can compute statistics like average rating.
fprintf('Average rating for movie 1 (Toy Story): %f / 5\n\n', ...
mean(Y(1, R(1, :))));
% We can "visualize" the ratings matrix by plotting it with imagesc
imagesc(Y);
ylabel('Movies');
xlabel('Users');
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ============ Part 2: Collaborative Filtering Cost Function ===========
% You will now implement the cost function for collaborative filtering.
% To help you debug your cost function, we have included set of weights
% that we trained on that. Specifically, you should complete the code in
% cofiCostFunc.m to return J.
% Load pre-trained weights (X, Theta, num_users, num_movies, num_features)
load ('ex8_movieParams.mat');
% Reduce the data set size so that this runs faster
num_users = 4; num_movies = 5; num_features = 3;
X = X(1:num_movies, 1:num_features);
Theta = Theta(1:num_users, 1:num_features);
Y = Y(1:num_movies, 1:num_users);
R = R(1:num_movies, 1:num_users);
% Evaluate cost function
J = cofiCostFunc([X(:) ; Theta(:)], Y, R, num_users, num_movies, ...
num_features, 0);
fprintf(['Cost at loaded parameters: %f '...
'\n(this value should be about 22.22)\n'], J);
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ============== Part 3: Collaborative Filtering Gradient ==============
% Once your cost function matches up with ours, you should now implement
% the collaborative filtering gradient function. Specifically, you should
% complete the code in cofiCostFunc.m to return the grad argument.
%
fprintf('\nChecking Gradients (without regularization) ... \n');
% Check gradients by running checkNNGradients
checkCostFunction;
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ========= Part 4: Collaborative Filtering Cost Regularization ========
% Now, you should implement regularization for the cost function for
% collaborative filtering. You can implement it by adding the cost of
% regularization to the original cost computation.
%
% Evaluate cost function
J = cofiCostFunc([X(:) ; Theta(:)], Y, R, num_users, num_movies, ...
num_features, 1.5);
fprintf(['Cost at loaded parameters (lambda = 1.5): %f '...
'\n(this value should be about 31.34)\n'], J);
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ======= Part 5: Collaborative Filtering Gradient Regularization ======
% Once your cost matches up with ours, you should proceed to implement
% regularization for the gradient.
%
%
fprintf('\nChecking Gradients (with regularization) ... \n');
% Check gradients by running checkNNGradients
checkCostFunction(1.5);
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ============== Part 6: Entering ratings for a new user ===============
% Before we will train the collaborative filtering model, we will first
% add ratings that correspond to a new user that we just observed. This
% part of the code will also allow you to put in your own ratings for the
% movies in our dataset!
%
movieList = loadMovieList();
% Initialize my ratings
my_ratings = zeros(1682, 1);
% Check the file movie_idx.txt for id of each movie in our dataset
% For example, Toy Story (1995) has ID 1, so to rate it "4", you can set
my_ratings(1) = 4;
% Or suppose did not enjoy Silence of the Lambs (1991), you can set
my_ratings(98) = 2;
% We have selected a few movies we liked / did not like and the ratings we
% gave are as follows:
my_ratings(7) = 3;
my_ratings(12)= 5;
my_ratings(54) = 4;
my_ratings(64)= 5;
my_ratings(66)= 3;
my_ratings(69) = 5;
my_ratings(183) = 4;
my_ratings(226) = 5;
my_ratings(355)= 5;
fprintf('\n\nNew user ratings:\n');
for i = 1:length(my_ratings)
if my_ratings(i) > 0
fprintf('Rated %d for %s\n', my_ratings(i), ...
movieList{i});
end
end
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ================== Part 7: Learning Movie Ratings ====================
% Now, you will train the collaborative filtering model on a movie rating
% dataset of 1682 movies and 943 users
%
fprintf('\nTraining collaborative filtering...\n');
% Load data
load('ex8_movies.mat');
% Y is a 1682x943 matrix, containing ratings (1-5) of 1682 movies by
% 943 users
%
% R is a 1682x943 matrix, where R(i,j) = 1 if and only if user j gave a
% rating to movie i
% Add our own ratings to the data matrix
Y = [my_ratings Y];
R = [(my_ratings ~= 0) R];
% Normalize Ratings
[Ynorm, Ymean] = normalizeRatings(Y, R);
% Useful Values
num_users = size(Y, 2);
num_movies = size(Y, 1);
num_features = 10;
% Set Initial Parameters (Theta, X)
X = randn(num_movies, num_features);
Theta = randn(num_users, num_features);
initial_parameters = [X(:); Theta(:)];
% Set options for fmincg
options = optimset('GradObj', 'on', 'MaxIter', 100);
% Set Regularization
lambda = 10;
theta = fmincg (@(t)(cofiCostFunc(t, Ynorm, R, num_users, num_movies, ...
num_features, lambda)), ...
initial_parameters, options);
% Unfold the returned theta back into U and W
X = reshape(theta(1:num_movies*num_features), num_movies, num_features);
Theta = reshape(theta(num_movies*num_features+1:end), ...
num_users, num_features);
fprintf('Recommender system learning completed.\n');
fprintf('\nProgram paused. Press enter to continue.\n');
pause;
%% ================== Part 8: Recommendation for you ====================
% After training the model, you can now make recommendations by computing
% the predictions matrix.
%
p = X * Theta';
my_predictions = p(:,1) + Ymean;
movieList = loadMovieList();
[r, ix] = sort(my_predictions, 'descend');
fprintf('\nTop recommendations for you:\n');
for i=1:10
j = ix(i);
fprintf('Predicting rating %.1f for movie %s\n', my_predictions(j), ...
movieList{j});
end
fprintf('\n\nOriginal ratings provided:\n');
for i = 1:length(my_ratings)
if my_ratings(i) > 0
fprintf('Rated %d for %s\n', my_ratings(i), ...
movieList{i});
end
end
Anomaly Detection and Recommender Systems/fmincg.m 0 → 100755
View file @ 2f2dbe24
function [X, fX, i] = fmincg(f, X, options, P1, P2, P3, P4, P5)
% Minimize a continuous differentialble multivariate function. Starting point
% is given by "X" (D by 1), and the function named in the string "f", must
% return a function value and a vector of partial derivatives. The Polack-
% Ribiere flavour of conjugate gradients is used to compute search directions,
% and a line search using quadratic and cubic polynomial approximations and the
% Wolfe-Powell stopping criteria is used together with the slope ratio method
% for guessing initial step sizes. Additionally a bunch of checks are made to
% make sure that exploration is taking place and that extrapolation will not
% be unboundedly large. The "length" gives the length of the run: if it is
% positive, it gives the maximum number of line searches, if negative its
% absolute gives the maximum allowed number of function evaluations. You can
% (optionally) give "length" a second component, which will indicate the
% reduction in function value to be expected in the first line-search (defaults
% to 1.0). The function returns when either its length is up, or if no further
% progress can be made (ie, we are at a minimum, or so close that due to
% numerical problems, we cannot get any closer). If the function terminates
% within a few iterations, it could be an indication that the function value
% and derivatives are not consistent (ie, there may be a bug in the
% implementation of your "f" function). The function returns the found
% solution "X", a vector of function values "fX" indicating the progress made
% and "i" the number of iterations (line searches or function evaluations,
% depending on the sign of "length") used.
%
% Usage: [X, fX, i] = fmincg(f, X, options, P1, P2, P3, P4, P5)
%
% See also: checkgrad
%
% Copyright (C) 2001 and 2002 by Carl Edward Rasmussen. Date 2002-02-13
%
%
% (C) Copyright 1999, 2000 & 2001, Carl Edward Rasmussen
%
% Permission is granted for anyone to copy, use, or modify these
% programs and accompanying documents for purposes of research or
% education, provided this copyright notice is retained, and note is
% made of any changes that have been made.
%
% These programs and documents are distributed without any warranty,
% express or implied. As the programs were written for research
% purposes only, they have not been tested to the degree that would be
% advisable in any important application. All use of these programs is
% entirely at the user's own risk.
%
% [ml-class] Changes Made:
% 1) Function name and argument specifications
% 2) Output display
%
% Read options
if exist('options', 'var') && ~isempty(options) && isfield(options, 'MaxIter')
length = options.MaxIter;
else
length = 100;
end
RHO = 0.01; % a bunch of constants for line searches
SIG = 0.5; % RHO and SIG are the constants in the Wolfe-Powell conditions
INT = 0.1; % don't reevaluate within 0.1 of the limit of the current bracket
EXT = 3.0; % extrapolate maximum 3 times the current bracket
MAX = 20; % max 20 function evaluations per line search
RATIO = 100; % maximum allowed slope ratio
argstr = ['feval(f, X']; % compose string used to call function
for i = 1:(nargin - 3)
argstr = [argstr, ',P', int2str(i)];
end
argstr = [argstr, ')'];
if max(size(length)) == 2, red=length(2); length=length(1); else red=1; end
S=['Iteration '];
i = 0; % zero the run length counter
ls_failed = 0; % no previous line search has failed
fX = [];
[f1 df1] = eval(argstr); % get function value and gradient
i = i + (length<0); % count epochs?!
s = -df1; % search direction is steepest
d1 = -s'*s; % this is the slope
z1 = red/(1-d1); % initial step is red/(|s|+1)
while i < abs(length) % while not finished
i = i + (length>0); % count iterations?!
X0 = X; f0 = f1; df0 = df1; % make a copy of current values
X = X + z1*s; % begin line search
[f2 df2] = eval(argstr);
i = i + (length<0); % count epochs?!
d2 = df2'*s;
f3 = f1; d3 = d1; z3 = -z1; % initialize point 3 equal to point 1
if length>0, M = MAX; else M = min(MAX, -length-i); end
success = 0; limit = -1; % initialize quanteties
while 1
while ((f2 > f1+z1*RHO*d1) || (d2 > -SIG*d1)) && (M > 0)
limit = z1; % tighten the bracket
if f2 > f1
z2 = z3 - (0.5*d3*z3*z3)/(d3*z3+f2-f3); % quadratic fit
else
A = 6*(f2-f3)/z3+3*(d2+d3); % cubic fit
B = 3*(f3-f2)-z3*(d3+2*d2);
z2 = (sqrt(B*B-A*d2*z3*z3)-B)/A; % numerical error possible - ok!
end
if isnan(z2) || isinf(z2)
z2 = z3/2; % if we had a numerical problem then bisect
end
z2 = max(min(z2, INT*z3),(1-INT)*z3); % don't accept too close to limits
z1 = z1 + z2; % update the step
X = X + z2*s;
[f2 df2] = eval(argstr);
M = M - 1; i = i + (length<0); % count epochs?!
d2 = df2'*s;
z3 = z3-z2; % z3 is now relative to the location of z2
end
if f2 > f1+z1*RHO*d1 || d2 > -SIG*d1
break; % this is a failure
elseif d2 > SIG*d1
success = 1; break; % success
elseif M == 0
break; % failure
end
A = 6*(f2-f3)/z3+3*(d2+d3); % make cubic extrapolation
B = 3*(f3-f2)-z3*(d3+2*d2);
z2 = -d2*z3*z3/(B+sqrt(B*B-A*d2*z3*z3)); % num. error possible - ok!
if ~isreal(z2) || isnan(z2) || isinf(z2) || z2 < 0 % num prob or wrong sign?
if limit < -0.5 % if we have no upper limit
z2 = z1 * (EXT-1); % the extrapolate the maximum amount
else
z2 = (limit-z1)/2; % otherwise bisect
end
elseif (limit > -0.5) && (z2+z1 > limit) % extraplation beyond max?
z2 = (limit-z1)/2; % bisect
elseif (limit < -0.5) && (z2+z1 > z1*EXT) % extrapolation beyond limit
z2 = z1*(EXT-1.0); % set to extrapolation limit
elseif z2 < -z3*INT
z2 = -z3*INT;
elseif (limit > -0.5) && (z2 < (limit-z1)*(1.0-INT)) % too close to limit?
z2 = (limit-z1)*(1.0-INT);
end
f3 = f2; d3 = d2; z3 = -z2; % set point 3 equal to point 2
z1 = z1 + z2; X = X + z2*s; % update current estimates
[f2 df2] = eval(argstr);
M = M - 1; i = i + (length<0); % count epochs?!
d2 = df2'*s;
end % end of line search
if success % if line search succeeded
f1 = f2; fX = [fX' f1]';
fprintf('%s %4i | Cost: %4.6e\r', S, i, f1);
s = (df2'*df2-df1'*df2)/(df1'*df1)*s - df2; % Polack-Ribiere direction
tmp = df1; df1 = df2; df2 = tmp; % swap derivatives
d2 = df1'*s;
if d2 > 0 % new slope must be negative
s = -df1; % otherwise use steepest direction
d2 = -s'*s;
end
z1 = z1 * min(RATIO, d1/(d2-realmin)); % slope ratio but max RATIO
d1 = d2;
ls_failed = 0; % this line search did not fail
else
X = X0; f1 = f0; df1 = df0; % restore point from before failed line search
if ls_failed || i > abs(length) % line search failed twice in a row
break; % or we ran out of time, so we give up
end
tmp = df1; df1 = df2; df2 = tmp; % swap derivatives
s = -df1; % try steepest
d1 = -s'*s;
z1 = 1/(1-d1);
ls_failed = 1; % this line search failed
end
if exist('OCTAVE_VERSION')
fflush(stdout);
end
end
fprintf('\n');
Anomaly Detection and Recommender Systems/lib/jsonlab/AUTHORS.txt 0 → 100755
View file @ 2f2dbe24
The author of "jsonlab" toolbox is Qianqian Fang. Qianqian
is currently an Assistant Professor at Massachusetts General Hospital,
Harvard Medical School.
Address: Martinos Center for Biomedical Imaging,
Massachusetts General Hospital,
Harvard Medical School
Bldg 149, 13th St, Charlestown, MA 02129, USA
URL: http://nmr.mgh.harvard.edu/~fangq/
Email: <fangq at nmr.mgh.harvard.edu> or <fangqq at gmail.com>
The script loadjson.m was built upon previous works by
- Nedialko Krouchev: http://www.mathworks.com/matlabcentral/fileexchange/25713
date: 2009/11/02
- François Glineur: http://www.mathworks.com/matlabcentral/fileexchange/23393
date: 2009/03/22
- Joel Feenstra: http://www.mathworks.com/matlabcentral/fileexchange/20565
date: 2008/07/03
This toolbox contains patches submitted by the following contributors:
- Blake Johnson <bjohnso at bbn.com>
part of revision 341
- Niclas Borlin <Niclas.Borlin at cs.umu.se>
various fixes in revision 394, including
- loadjson crashes for all-zero sparse matrix.
- loadjson crashes for empty sparse matrix.
- Non-zero size of 0-by-N and N-by-0 empty matrices is lost after savejson/loadjson.
- loadjson crashes for sparse real column vector.
- loadjson crashes for sparse complex column vector.
- Data is corrupted by savejson for sparse real row vector.
- savejson crashes for sparse complex row vector.
- Yul Kang <yul.kang.on at gmail.com>
patches for svn revision 415.
- savejson saves an empty cell array as [] instead of null
- loadjson differentiates an empty struct from an empty array
Anomaly Detection and Recommender Systems/lib/jsonlab/ChangeLog.txt 0 → 100755
View file @ 2f2dbe24
============================================================================
JSONlab - a toolbox to encode/decode JSON/UBJSON files in MATLAB/Octave
----------------------------------------------------------------------------
JSONlab ChangeLog (key features marked by *):
== JSONlab 1.0 (codename: Optimus - Final), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2015/01/02 polish help info for all major functions, update examples, finalize 1.0
2014/12/19 fix a bug to strictly respect NoRowBracket in savejson
== JSONlab 1.0.0-RC2 (codename: Optimus - RC2), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2014/11/22 show progress bar in loadjson ('ShowProgress')
2014/11/17 add Compact option in savejson to output compact JSON format ('Compact')
2014/11/17 add FastArrayParser in loadjson to specify fast parser applicable levels
2014/09/18 start official github mirror: https://github.com/fangq/jsonlab
== JSONlab 1.0.0-RC1 (codename: Optimus - RC1), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2014/09/17 fix several compatibility issues when running on octave versions 3.2-3.8
2014/09/17 support 2D cell and struct arrays in both savejson and saveubjson
2014/08/04 escape special characters in a JSON string
2014/02/16 fix a bug when saving ubjson files
== JSONlab 0.9.9 (codename: Optimus - beta), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2014/01/22 use binary read and write in saveubjson and loadubjson
== JSONlab 0.9.8-1 (codename: Optimus - alpha update 1), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2013/10/07 better round-trip conservation for empty arrays and structs (patch submitted by Yul Kang)
== JSONlab 0.9.8 (codename: Optimus - alpha), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2013/08/23 *universal Binary JSON (UBJSON) support, including both saveubjson and loadubjson
== JSONlab 0.9.1 (codename: Rodimus, update 1), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2012/12/18 *handling of various empty and sparse matrices (fixes submitted by Niclas Borlin)
== JSONlab 0.9.0 (codename: Rodimus), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2012/06/17 *new format for an invalid leading char, unpacking hex code in savejson
2012/06/01 support JSONP in savejson
2012/05/25 fix the empty cell bug (reported by Cyril Davin)
2012/04/05 savejson can save to a file (suggested by Patrick Rapin)
== JSONlab 0.8.1 (codename: Sentiel, Update 1), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2012/02/28 loadjson quotation mark escape bug, see http://bit.ly/yyk1nS
2012/01/25 patch to handle root-less objects, contributed by Blake Johnson
== JSONlab 0.8.0 (codename: Sentiel), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2012/01/13 *speed up loadjson by 20 fold when parsing large data arrays in matlab
2012/01/11 remove row bracket if an array has 1 element, suggested by Mykel Kochenderfer
2011/12/22 *accept sequence of 'param',value input in savejson and loadjson
2011/11/18 fix struct array bug reported by Mykel Kochenderfer
== JSONlab 0.5.1 (codename: Nexus Update 1), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2011/10/21 fix a bug in loadjson, previous code does not use any of the acceleration
2011/10/20 loadjson supports JSON collections - concatenated JSON objects
== JSONlab 0.5.0 (codename: Nexus), FangQ <fangq (at) nmr.mgh.harvard.edu> ==
2011/10/16 package and release jsonlab 0.5.0
2011/10/15 *add json demo and regression test, support cpx numbers, fix double quote bug
2011/10/11 *speed up readjson dramatically, interpret _Array* tags, show data in root level
2011/10/10 create jsonlab project, start jsonlab website, add online documentation
2011/10/07 *speed up savejson by 25x using sprintf instead of mat2str, add options support
2011/10/06 *savejson works for structs, cells and arrays
2011/09/09 derive loadjson from JSON parser from MATLAB Central, draft savejson.m
Anomaly Detection and Recommender Systems/lib/jsonlab/LICENSE_BSD.txt 0 → 100755
View file @ 2f2dbe24
Copyright 2011-2015 Qianqian Fang <fangq at nmr.mgh.harvard.edu>. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The views and conclusions contained in the software and documentation are those of the
authors and should not be interpreted as representing official policies, either expressed
or implied, of the copyright holders.
Anomaly Detection and Recommender Systems/lib/jsonlab/jsonopt.m 0 → 100755
View file @ 2f2dbe24
function val=jsonopt(key,default,varargin)
%
% val=jsonopt(key,default,optstruct)
%
% setting options based on a struct. The struct can be produced
% by varargin2struct from a list of 'param','value' pairs
%
% authors:Qianqian Fang (fangq<at> nmr.mgh.harvard.edu)
%
% $Id: loadjson.m 371 2012-06-20 12:43:06Z fangq $
%
% input:
% key: a string with which one look up a value from a struct
% default: if the key does not exist, return default
% optstruct: a struct where each sub-field is a key
%
% output:
% val: if key exists, val=optstruct.key; otherwise val=default
%
% license:
% BSD, see LICENSE_BSD.txt files for details
%
% -- this function is part of jsonlab toolbox (http://iso2mesh.sf.net/cgi-bin/index.cgi?jsonlab)
%
val=default;
if(nargin<=2) return; end
opt=varargin{1};
if(isstruct(opt) && isfield(opt,key))
val=getfield(opt,key);
end
Anomaly Detection and Recommender Systems/lib/jsonlab/mergestruct.m 0 → 100755
View file @ 2f2dbe24
function s=mergestruct(s1,s2)
%
% s=mergestruct(s1,s2)
%
% merge two struct objects into one
%
% authors:Qianqian Fang (fangq<at> nmr.mgh.harvard.edu)
% date: 2012/12/22
%
% input:
% s1,s2: a struct object, s1 and s2 can not be arrays
%
% output:
% s: the merged struct object. fields in s1 and s2 will be combined in s.
%
% license:
% BSD, see LICENSE_BSD.txt files for details
%
% -- this function is part of jsonlab toolbox (http://iso2mesh.sf.net/cgi-bin/index.cgi?jsonlab)
%
if(~isstruct(s1) || ~isstruct(s2))
error('input parameters contain non-struct');
end
if(length(s1)>1 || length(s2)>1)
error('can not merge struct arrays');
end
fn=fieldnames(s2);
s=s1;
for i=1:length(fn)
s=setfield(s,fn{i},getfield(s2,fn{i}));
end
Anomaly Detection and Recommender Systems/lib/jsonlab/varargin2struct.m 0 → 100755
View file @ 2f2dbe24
function opt=varargin2struct(varargin)
%
% opt=varargin2struct('param1',value1,'param2',value2,...)
% or
% opt=varargin2struct(...,optstruct,...)
%
% convert a series of input parameters into a structure
%
% authors:Qianqian Fang (fangq<at> nmr.mgh.harvard.edu)
% date: 2012/12/22
%
% input:
% 'param', value: the input parameters should be pairs of a string and a value
% optstruct: if a parameter is a struct, the fields will be merged to the output struct
%
% output:
% opt: a struct where opt.param1=value1, opt.param2=value2 ...
%
% license:
% BSD, see LICENSE_BSD.txt files for details
%
% -- this function is part of jsonlab toolbox (http://iso2mesh.sf.net/cgi-bin/index.cgi?jsonlab)
%
len=length(varargin);
opt=struct;
if(len==0) return; end
i=1;
while(i<=len)
if(isstruct(varargin{i}))
opt=mergestruct(opt,varargin{i});
elseif(ischar(varargin{i}) && i<len)
opt=setfield(opt,varargin{i},varargin{i+1});
i=i+1;
else
error('input must be in the form of ...,''name'',value,... pairs or structs');
end
i=i+1;
end
Anomaly Detection and Recommender Systems/lib/makeValidFieldName.m 0 → 100755
View file @ 2f2dbe24
function str = makeValidFieldName(str)
% From MATLAB doc: field names must begin with a letter, which may be
% followed by any combination of letters, digits, and underscores.
% Invalid characters will be converted to underscores, and the prefix
% "x0x[Hex code]_" will be added if the first character is not a letter.
isoct=exist('OCTAVE_VERSION','builtin');
pos=regexp(str,'^[^A-Za-z]','once');
if(~isempty(pos))
if(~isoct)
str=regexprep(str,'^([^A-Za-z])','x0x${sprintf(''%X'',unicode2native($1))}_','once');
else
str=sprintf('x0x%X_%s',char(str(1)),str(2:end));
end
end
if(isempty(regexp(str,'[^0-9A-Za-z_]', 'once' ))) return; end
if(~isoct)
str=regexprep(str,'([^0-9A-Za-z_])','_0x${sprintf(''%X'',unicode2native($1))}_');
else
pos=regexp(str,'[^0-9A-Za-z_]');
if(isempty(pos)) return; end
str0=str;
pos0=[0 pos(:)' length(str)];
str='';
for i=1:length(pos)
str=[str str0(pos0(i)+1:pos(i)-1) sprintf('_0x%X_',str0(pos(i)))];
end
if(pos(end)~=length(str))
str=[str str0(pos0(end-1)+1:pos0(end))];
end
end
Anomaly Detection and Recommender Systems/lib/submitWithConfiguration.m 0 → 100755
View file @ 2f2dbe24
function submitWithConfiguration(conf)
addpath('./lib/jsonlab');
parts = parts(conf);
fprintf('== Submitting solutions | %s...\n', conf.itemName);
tokenFile = 'token.mat';
if exist(tokenFile, 'file')
load(tokenFile);
[email token] = promptToken(email, token, tokenFile);
else
[email token] = promptToken('', '', tokenFile);
end
if isempty(token)
fprintf('!! Submission Cancelled\n');
return
end
try
response = submitParts(conf, email, token, parts);
catch
e = lasterror();
fprintf('\n!! Submission failed: %s\n', e.message);
fprintf('\n\nFunction: %s\nFileName: %s\nLineNumber: %d\n', ...
e.stack(1,1).name, e.stack(1,1).file, e.stack(1,1).line);
fprintf('\nPlease correct your code and resubmit.\n');
return
end
if isfield(response, 'errorMessage')
fprintf('!! Submission failed: %s\n', response.errorMessage);
elseif isfield(response, 'errorCode')
fprintf('!! Submission failed: %s\n', response.message);
else
showFeedback(parts, response);
save(tokenFile, 'email', 'token');
end
end
function [email token] = promptToken(email, existingToken, tokenFile)
if (~isempty(email) && ~isempty(existingToken))
prompt = sprintf( ...
'Use token from last successful submission (%s)? (Y/n): ', ...
email);
reenter = input(prompt, 's');
if (isempty(reenter) || reenter(1) == 'Y' || reenter(1) == 'y')
token = existingToken;
return;
else
delete(tokenFile);
end
end
email = input('Login (email address): ', 's');
token = input('Token: ', 's');
end
function isValid = isValidPartOptionIndex(partOptions, i)
isValid = (~isempty(i)) && (1 <= i) && (i <= numel(partOptions));
end
function response = submitParts(conf, email, token, parts)
body = makePostBody(conf, email, token, parts);
submissionUrl = submissionUrl();
responseBody = getResponse(submissionUrl, body);
jsonResponse = validateResponse(responseBody);
response = loadjson(jsonResponse);
end
function body = makePostBody(conf, email, token, parts)
bodyStruct.assignmentSlug = conf.assignmentSlug;
bodyStruct.submitterEmail = email;
bodyStruct.secret = token;
bodyStruct.parts = makePartsStruct(conf, parts);
opt.Compact = 1;
body = savejson('', bodyStruct, opt);
end
function partsStruct = makePartsStruct(conf, parts)
for part = parts
partId = part{:}.id;
fieldName = makeValidFieldName(partId);
outputStruct.output = conf.output(partId);
partsStruct.(fieldName) = outputStruct;
end
end
function [parts] = parts(conf)
parts = {};
for partArray = conf.partArrays
part.id = partArray{:}{1};
part.sourceFiles = partArray{:}{2};
part.name = partArray{:}{3};
parts{end + 1} = part;
end
end
function showFeedback(parts, response)
fprintf('== \n');
fprintf('== %43s | %9s | %-s\n', 'Part Name', 'Score', 'Feedback');
fprintf('== %43s | %9s | %-s\n', '---------', '-----', '--------');
for part = parts
score = '';
partFeedback = '';
partFeedback = response.partFeedbacks.(makeValidFieldName(part{:}.id));
partEvaluation = response.partEvaluations.(makeValidFieldName(part{:}.id));
score = sprintf('%d / %3d', partEvaluation.score, partEvaluation.maxScore);
fprintf('== %43s | %9s | %-s\n', part{:}.name, score, partFeedback);
end
evaluation = response.evaluation;
totalScore = sprintf('%d / %d', evaluation.score, evaluation.maxScore);
fprintf('== --------------------------------\n');
fprintf('== %43s | %9s | %-s\n', '', totalScore, '');
fprintf('== \n');
end
% use urlread or curl to send submit results to the grader and get a response
function response = getResponse(url, body)
% try using urlread() and a secure connection
params = {'jsonBody', body};
[response, success] = urlread(url, 'post', params);
if (success == 0)
% urlread didn't work, try curl & the peer certificate patch
if ispc
% testing note: use 'jsonBody =' for a test case
json_command = sprintf('echo jsonBody=%s | curl -k -X POST -d @- %s', body, url);
else
% it's linux/OS X, so use the other form
json_command = sprintf('echo ''jsonBody=%s'' | curl -k -X POST -d @- %s', body, url);
end
% get the response body for the peer certificate patch method
[code, response] = system(json_command);
% test the success code
if (code ~= 0)
fprintf('[error] submission with curl() was not successful\n');
end
end
end
% validate the grader's response
function response = validateResponse(resp)
% test if the response is json or an HTML page
isJson = length(resp) > 0 && resp(1) == '{';
isHtml = findstr(lower(resp), '<html');
if (isJson)
response = resp;
elseif (isHtml)
% the response is html, so it's probably an error message
printHTMLContents(resp);
error('Grader response is an HTML message');
else
error('Grader sent no response');
end
end
% parse a HTML response and print it's contents
function printHTMLContents(response)
strippedResponse = regexprep(response, '<[^>]+>', ' ');
strippedResponse = regexprep(strippedResponse, '[\t ]+', ' ');
fprintf(strippedResponse);
end
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Service configuration
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function submissionUrl = submissionUrl()
submissionUrl = 'https://www-origin.coursera.org/api/onDemandProgrammingImmediateFormSubmissions.v1';
end
Anomaly Detection and Recommender Systems/loadMovieList.m 0 → 100755
View file @ 2f2dbe24
function movieList = loadMovieList()
%GETMOVIELIST reads the fixed movie list in movie.txt and returns a
%cell array of the words
% movieList = GETMOVIELIST() reads the fixed movie list in movie.txt
% and returns a cell array of the words in movieList.
%% Read the fixed movieulary list
fid = fopen('movie_ids.txt');
% Store all movies in cell array movie{}
n = 1682; % Total number of movies
movieList = cell(n, 1);
for i = 1:n
% Read line
line = fgets(fid);
% Word Index (can ignore since it will be = i)
[idx, movieName] = strtok(line, ' ');
% Actual Word
movieList{i} = strtrim(movieName);
end
fclose(fid);
end
Anomaly Detection and Recommender Systems/movie_ids.txt 0 → 100755
View file @ 2f2dbe24
This diff is collapsed.
Anomaly Detection and Recommender Systems/multivariateGaussian.m 0 → 100755
View file @ 2f2dbe24
function p = multivariateGaussian(X, mu, Sigma2)
%MULTIVARIATEGAUSSIAN Computes the probability density function of the
%multivariate gaussian distribution.
% p = MULTIVARIATEGAUSSIAN(X, mu, Sigma2) Computes the probability
% density function of the examples X under the multivariate gaussian
% distribution with parameters mu and Sigma2. If Sigma2 is a matrix, it is
% treated as the covariance matrix. If Sigma2 is a vector, it is treated
% as the \sigma^2 values of the variances in each dimension (a diagonal
% covariance matrix)
%
k = length(mu);
if (size(Sigma2, 2) == 1) || (size(Sigma2, 1) == 1)
Sigma2 = diag(Sigma2);
end
X = bsxfun(@minus, X, mu(:)');
p = (2 * pi) ^ (- k / 2) * det(Sigma2) ^ (-0.5) * ...
exp(-0.5 * sum(bsxfun(@times, X * pinv(Sigma2), X), 2));
end
\ No newline at end of file
Anomaly Detection and Recommender Systems/normalizeRatings.m 0 → 100755
View file @ 2f2dbe24
function [Ynorm, Ymean] = normalizeRatings(Y, R)
%NORMALIZERATINGS Preprocess data by subtracting mean rating for every
%movie (every row)
% [Ynorm, Ymean] = NORMALIZERATINGS(Y, R) normalized Y so that each movie
% has a rating of 0 on average, and returns the mean rating in Ymean.
%
[m, n] = size(Y);
Ymean = zeros(m, 1);
Ynorm = zeros(size(Y));
for i = 1:m
idx = find(R(i, :) == 1);
Ymean(i) = mean(Y(i, idx));
Ynorm(i, idx) = Y(i, idx) - Ymean(i);
end
end
Anomaly Detection and Recommender Systems/selectThreshold.m 0 → 100755
View file @ 2f2dbe24
function [bestEpsilon bestF1] = selectThreshold(yval, pval)
%SELECTTHRESHOLD Find the best threshold (epsilon) to use for selecting
%outliers
% [bestEpsilon bestF1] = SELECTTHRESHOLD(yval, pval) finds the best
% threshold to use for selecting outliers based on the results from a
% validation set (pval) and the ground truth (yval).
%
bestEpsilon = 0;
bestF1 = 0;
F1 = 0;
stepsize = (max(pval) - min(pval)) / 1000;
for epsilon = min(pval):stepsize:max(pval)
% ====================== YOUR CODE HERE ======================
% Instructions: Compute the F1 score of choosing epsilon as the
% threshold and place the value in F1. The code at the
% end of the loop will compare the F1 score for this
% choice of epsilon and set it to be the best epsilon if
% it is better than the current choice of epsilon.
%
% Note: You can use predictions = (pval < epsilon) to get a binary vector
% of 0's and 1's of the outlier predictions
tp=sum(floor(((pval<epsilon)+yval)/2));
fp=sum(ceil(((pval<epsilon)-yval)/2));
fn=-sum(floor(((pval<epsilon)-yval)/2));
prec=tp/(tp+fp);
rec=tp/(tp+fn);
F1=2*prec*rec/(prec+rec);
% =============================================================
if F1 > bestF1
bestF1 = F1;
bestEpsilon = epsilon;
end
end
end
Anomaly Detection and Recommender Systems/submit.m 0 → 100755
View file @ 2f2dbe24
function submit()
addpath('./lib');
conf.assignmentSlug = 'anomaly-detection-and-recommender-systems';
conf.itemName = 'Anomaly Detection and Recommender Systems';
conf.partArrays = { ...
{ ...
'1', ...
{ 'estimateGaussian.m' }, ...
'Estimate Gaussian Parameters', ...
}, ...
{ ...
'2', ...
{ 'selectThreshold.m' }, ...
'Select Threshold', ...
}, ...
{ ...
'3', ...
{ 'cofiCostFunc.m' }, ...
'Collaborative Filtering Cost', ...
}, ...
{ ...
'4', ...
{ 'cofiCostFunc.m' }, ...
'Collaborative Filtering Gradient', ...
}, ...
{ ...
'5', ...
{ 'cofiCostFunc.m' }, ...
'Regularized Cost', ...
}, ...
{ ...
'6', ...
{ 'cofiCostFunc.m' }, ...
'Regularized Gradient', ...
}, ...
};
conf.output = @output;
submitWithConfiguration(conf);
end
function out = output(partId, auxstring)
% Random Test Cases
n_u = 3; n_m = 4; n = 5;
X = reshape(sin(1:n_m*n), n_m, n);
Theta = reshape(cos(1:n_u*n), n_u, n);
Y = reshape(sin(1:2:2*n_m*n_u), n_m, n_u);
R = Y > 0.5;
pval = [abs(Y(:)) ; 0.001; 1];
Y = (Y .* double(R)); % set 'Y' values to 0 for movies not reviewed
yval = [R(:) ; 1; 0];
params = [X(:); Theta(:)];
if partId == '1'
[mu sigma2] = estimateGaussian(X);
out = sprintf('%0.5f ', [mu(:); sigma2(:)]);
elseif partId == '2'
[bestEpsilon bestF1] = selectThreshold(yval, pval);
out = sprintf('%0.5f ', [bestEpsilon(:); bestF1(:)]);
elseif partId == '3'
[J] = cofiCostFunc(params, Y, R, n_u, n_m, ...
n, 0);
out = sprintf('%0.5f ', J(:));
elseif partId == '4'
[J, grad] = cofiCostFunc(params, Y, R, n_u, n_m, ...
n, 0);
out = sprintf('%0.5f ', grad(:));
elseif partId == '5'
[J] = cofiCostFunc(params, Y, R, n_u, n_m, ...
n, 1.5);
out = sprintf('%0.5f ', J(:));
elseif partId == '6'
[J, grad] = cofiCostFunc(params, Y, R, n_u, n_m, ...
n, 1.5);
out = sprintf('%0.5f ', grad(:));
end
end
Anomaly Detection and Recommender Systems/visualizeFit.m 0 → 100755
View file @ 2f2dbe24
function visualizeFit(X, mu, sigma2)
%VISUALIZEFIT Visualize the dataset and its estimated distribution.
% VISUALIZEFIT(X, p, mu, sigma2) This visualization shows you the
% probability density function of the Gaussian distribution. Each example
% has a location (x1, x2) that depends on its feature values.
%
[X1,X2] = meshgrid(0:.5:35);
Z = multivariateGaussian([X1(:) X2(:)],mu,sigma2);
Z = reshape(Z,size(X1));
plot(X(:, 1), X(:, 2),'bx');
hold on;
% Do not plot if there are infinities
if (sum(isinf(Z)) == 0)
contour(X1, X2, Z, 10.^(-20:3:0)');
end
hold off;
end
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment