Reported-by: Thomas Munro, Justin Pryzby

Discussion: https://postgr.es/m/CAEepm=1_682z-09DNHj4GkCJAqWK-D6h9Oq5ea84T1oqq1-Utg@mail.gmail.com

Author: Alexander Korotkov <a.korotkov@postgrespro.ru>

Author: Daniel Gustafsson <daniel@yesql.se>

Just noticed that these were quite redundant, since we're holding the
page address in a local variable anyway, and we have pin on the buffer
throughout.

Also improve a comment.

FreeSpaceMapVacuumRange has the same effect, is more efficient if many
pages are involved, and makes fewer assumptions about how it's used.
Notably, Claudio Freire pointed out that UpdateFreeSpaceMap could fail
if the specified freespace value isn't the maximum possible.  This isn't
a problem for the single existing user, but the function represents an
attractive nuisance IMO, because it's named as though it were a
general-purpose update function and its limitations are undocumented.
In any case we don't need multiple ways to get the same result.

In passing, do some code review and cleanup in RelationAddExtraBlocks.
In particular, I see no excuse for it to omit the PageIsNew safety check
that's done in the mainline extension path in RelationGetBufferForTuple.

Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com

Reported-by: Tels

Discussion: https://postgr.es/m/e66e05bc55f5ce904e361ad17a3395ae.squirrel@sm.webmail.pair.com

VACUUM updates leaf-level FSM entries immediately after cleaning the
corresponding heap blocks.  fsmpage.c updates the intra-page search trees
on the leaf-level FSM pages when this happens, but it does not touch the
upper-level FSM pages, so that the released space might not actually be
findable by searchers.  Previously, updating the upper-level pages happened
only at the conclusion of the VACUUM run, in a single FreeSpaceMapVacuum()
call.  This is bad because the VACUUM might get canceled before ever
reaching that point, so that from the point of view of searchers no space
has been freed at all, leading to table bloat.

We can improve matters by updating the upper pages immediately after each
cycle of index-cleaning and heap-cleaning, processing just the FSM pages
corresponding to the range of heap blocks we have now fully cleaned.
This adds a small amount of extra work, since the FSM pages leading down
to each range boundary will be touched twice, but it's pretty negligible
compared to everything else going on in a large VACUUM.

If there are no indexes, VACUUM doesn't work in cycles but just cleans
each heap page on first visit.  In that case we just arbitrarily update
upper FSM pages after each 8GB of heap.  That maintains the goal of not
letting all this work slide until the very end, and it doesn't seem worth
expending extra complexity on a case that so seldom occurs in practice.

In either case, the FSM is fully up to date before any attempt is made
to truncate the relation, so that the most likely scenario for VACUUM
cancellation no longer results in out-of-date upper FSM pages.  When
we do successfully truncate, adjusting the FSM to reflect that is now
fully handled within FreeSpaceMapTruncateRel.

Claudio Freire, reviewed by Masahiko Sawada and Jing Wang, some additional
tweaks by me

Discussion: https://postgr.es/m/CAGTBQpYR0uJCNTt3M5GOzBRHo+-GccNO1nCaQ8yEJmZKSW5q1A@mail.gmail.com

Add explicit cast from scalar jsonb to all numeric and bool types. It would be
better to have cast from scalar jsonb to text too but there is already a cast
from jsonb to text as just text representation of json. There is no way to have
two different casts for the same type's pair.

Bump catalog version

Author: Anastasia Lubennikova with editorization by Nikita Glukhov and me
Review by: Aleksander Alekseev, Nikita Glukhov, Darafei Praliaskouski
Discussion: https://www.postgresql.org/message-id/flat/0154d35a-24ae-f063-5273-9ffcdf1c7f2e@postgrespro.ru

Was broken by "jit" link.

Arthur Zakirov, confirmed by Thomas Munro

Previously, committing or aborting inside a cursor loop was prohibited
because that would close and remove the cursor.  To allow that,
automatically convert such cursors to holdable cursors so they survive
commits or rollbacks.  Portals now have a new state "auto-held", which
means they have been converted automatically from pinned.  An auto-held
portal is kept on transaction commit or rollback, but is still removed
when returning to the main loop on error.

This supports all languages that have cursor loop constructs: PL/pgSQL,
PL/Python, PL/Perl.
Reviewed-by: Ildus Kurbangaliev <i.kurbangaliev@postgrespro.ru>

Reported-by: atorikoshi

Discussion: https://postgr.es/m/b61f2ab9-c0e0-d33d-ce3f-42a228025681@lab.ntt.co.jp

Author: atorikoshi

Reported-By: Lukas Fittl
Author: Andres Freund

As promised in earlier commits, this adds documentation about the new
build options, the new GUCs, about the planner logic when JIT is used,
and the benefits of JIT in general.

Also adds a more implementation oriented README.

I'm sure we're going to want to expand this further, but I think this
is a reasonable start.

Author: Andres Freund, with contributions by Thomas Munro
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de

This just shows a few details about JITing, e.g. how many functions
have been JITed, and how long that took.  To avoid noise in regression
tests with functions sometimes being JITed in --with-llvm builds,
disable display when COSTS OFF is specified.

Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de

This provides infrastructure to allow JITed code to inline code
implemented in C. This e.g. can be postgres internal functions or
extension code.

This already speeds up long running queries, by allowing the LLVM
optimizer to optimize across function boundaries. The optimization
potential currently doesn't reach its full potential because LLVM
cannot optimize the FunctionCallInfoData argument fully away, because
it's allocated on the heap rather than the stack. Fixing that is
beyond what's realistic for v11.

To be able to do that, use CLANG to convert C code to LLVM bitcode,
and have LLVM build a summary for it. That bitcode can then be used to
to inline functions at runtime. For that the bitcode needs to be
installed. Postgres bitcode goes into $pkglibdir/bitcode/postgres,
extensions go into equivalent directories.  PGXS has been modified so
that happens automatically if postgres has been compiled with LLVM
support.

Currently this isn't the fastest inline implementation, modules are
reloaded from disk during inlining. That's to work around an apparent
LLVM bug, triggering an apparently spurious error in LLVM assertion
enabled builds.  Once that is resolved we can remove the superfluous
read from disk.

Docs will follow in a later commit containing docs for the whole JIT
feature.

Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de

When compiling with clang glibc's definition of isinf() ends up
leading to and external libc function call. That's because there was a
bug in the builtin in an old gcc version, and clang claims
compatibility with an older version.  That causes clang to be
measurably slower for floating point heavy workloads than gcc.

To fix simply redirect isinf when using clang and clang confirms it
has __builtin_isinf().

The target cluster that was rewound needs to perform recovery from
the checkpoint created at failover, which leads it to remove or recreate
some files and directories that may have been copied from the source
cluster. So pg_rewind can skip synchronizing such files and directories,
and which reduces the amount of data transferred during a rewind
without changing the usefulness of the operation.

Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova, Stephen Frost and me

Discussion: https://postgr.es/m/20180205071022.GA17337@paquier.xyz

After processing the filemap to build the list of chunks that will be
fetched from the source to rewing the target server, it is possible that
a file which was previously processed is removed from the source.  A
simple example of such an occurence is a WAL segment which gets recycled
on the target in-between.  When the filemap is processed, files not
categorized as relation files are first truncated to prepare for its
full copy of which is going to be taken from the source, divided into a
set of junks.  However, for a recycled WAL segment, this would result in
a segment which has a zero-byte size.  With such an empty file,
post-rewind recovery thinks that records are saved but they are actually
not because of the truncation which happened when processing the
filemap, resulting in data loss.

In order to fix the problem, make sure that files which are found as
removed on the source when receiving chunks of them are as well deleted
on the target server for consistency.

Back-patch to 9.5 where pg_rewind was added.

Author: Tsunakawa Takayuki
Reviewed-by: Michael Paquier
Reported-by: Tsunakawa Takayuki

Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8DAAA2%40G01JPEXMBYT05

So far, a nested CALL or DO in PL/pgSQL would not establish a context
where transaction control statements were allowed.  This fixes that by
handling CALL and DO specially in PL/pgSQL, passing the atomic/nonatomic
execution context through and doing the required management around
transaction boundaries.
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>

tuplesort_gettupleslot() passed back tuples allocated in the tuplesort's
own memory context, even when the caller was responsible to free them.
This created a double-free hazard, because some callers might destroy
the tuplesort object (via tuplesort_end) before trying to clean up the
last returned tuple.  To avoid this, change the API to specify that the
tuple is allocated in the caller's memory context.  v10 and HEAD already
did things that way, but in 9.5 and 9.6 this is a live bug that can
demonstrably cause crashes with some grouping-set usages.

In 9.5 and 9.6, this requires doing an extra tuple copy in some cases,
which is unfortunate.  But the amount of refactoring needed to avoid it
seems excessive for a back-patched change, especially since the cases
where an extra copy happens are less performance-critical.

Likewise change tuplesort_getdatum() to return pass-by-reference Datums
in the caller's context not the tuplesort's context.  There seem to be
no live bugs among its callers, but clearly the same sort of situation
could happen in future.

For other tuplesort fetch routines, continue to allocate the memory in
the tuplesort's context.  This is a little inconsistent with what we now
do for tuplesort_gettupleslot() and tuplesort_getdatum(), but that's
preferable to adding new copy overhead in the back branches where it's
clearly unnecessary.  These other fetch routines provide the weakest
possible guarantees about tuple memory lifespan from v10 on, anyway,
so this actually seems more consistent overall.

Adjust relevant comments to reflect these API redefinitions.

Arguably, we should change the pre-9.5 branches as well, but since
there are no known failure cases there, it seems not worth the risk.

Peter Geoghegan, per report from Bernd Helmle.  Reviewed by Kyotaro
Horiguchi; thanks also to Andreas Seltenreich for extracting a
self-contained test case.

Discussion: https://postgr.es/m/1512661638.9720.34.camel@oopsware.de

Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.

Track relica origin replay progress for 2PC.

(Edited from patch 0003 in the logical decoding 2PC series.)

Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund

Rewrite one test to avoid a case where some Python versions have output
format differences (Decimal('1') vs Decimal("1")).

Add a new contrib module jsonb_plpython that provide a transform between
jsonb and PL/Python.  jsonb values are converted to appropriate Python
types such as dicts and lists, and vice versa.

Author: Anthony Bykov <a.bykov@postgrespro.ru>
Reviewed-by: Aleksander Alekseev <a.alekseev@postgrespro.ru>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>

Resolve build farm failures from c203d6cf,
diagnosed by Tom Lane.

The output of pg_stat_get_xact_tuples_hot_updated() and friends
is not guaranteed to show anything after the transaction completes.
Data is flushed slowly to stats collector, so using them can
give timing issues.

Instead using memset to set tts_isnull, call the new
slot_getmissingattrs().

Also fix a bug (= instead of >=) in the code generation. Normally = is
correct, but when repeatedly deforming fields not in a
tuple (e.g. deform up to natts + 1 and then natts + 2) >= is needed.

Discussion: https://postgr.es/m/20180328010053.i2qvsuuusst4lgmc@alap3.anarazel.de

Given that pg_attribute changed its layout...

Currently adding a column to a table with a non-NULL default results in
a rewrite of the table. For large tables this can be both expensive and
disruptive. This patch removes the need for the rewrite as long as the
default value is not volatile. The default expression is evaluated at
the time of the ALTER TABLE and the result stored in a new column
(attmissingval) in pg_attribute, and a new column (atthasmissing) is set
to true. Any existing row when fetched will be supplied with the
attmissingval. New rows will have the supplied value or the default and
so will never need the attmissingval.

Any time the table is rewritten all the atthasmissing and attmissingval
settings for the attributes are cleared, as they are no longer needed.

The most visible code change from this is in heap_attisnull, which
acquires a third TupleDesc argument, allowing it to detect a missing
value if there is one. In many cases where it is known that there will
not be any (e.g.  catalog relations) NULL can be passed for this
argument.

Andrew Dunstan, heavily modified from an original patch from Serge
Rielau.
Reviewed by Tom Lane, Andres Freund, Tomas Vondra and David Rowley.

Discussion: https://postgr.es/m/31e2e921-7002-4c27-59f5-51f08404c858@2ndQuadrant.com

It seems that all buildfarm members are now using the <stdbool.h> code
path, so that none of them report "bool" as a typedef.  We still need it
to be treated that way, so adjust pgindent to force that whether or not
it's in the given list.

Also, the recent introduction of LLVM infrastructure has caused the
appearance of some typedef names that we definitely *don't* want
treated as typedefs, such as "string" and "abs".  Extend the existing
blacklist to include these.  (Additions based on comparing v10's
typedefs list to what the buildfarm is currently emitting.)

Rearrange the code so that the lists of whitelisted/blacklisted
names are a bit easier to find and modify.

Andrew Dunstan and Tom Lane

Discussion: https://postgr.es/m/28690.1521912334@sss.pgh.pa.us

Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident".  The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to.  The "ident" string, if
wanted, is supplied later.  This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.

The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there.  And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.

All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead.  This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other.  Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.

I also arranged for plancache contexts to use the query source string
as their identifier.  This is basically free for CachedPlanSources, as
they contained a copy of that string already.  We pay an extra pstrdup
to do it for CachedPlans.  That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first).  I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.

This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format.  This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.

The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b.  Seems
better for extension authors to endure just one round of API changes
not two.

Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com

If the value of an index expression is unchanged after UPDATE,
allow HOT updates where previously we disallowed them, giving
a significant performance boost in those cases.

Particularly useful for indexes such as JSON->>field where the
JSON value changes but the indexed value does not.

Submitted as "surjective indexes" patch, now enabled by use
of new "recheck_on_update" parameter.

Author: Konstantin Knizhnik
Reviewer: Simon Riggs, with much wordsmithing and some cleanup

Previously, PQhost didn't return the connected host details when the
connection type was CHT_HOST_ADDRESS (i.e., via hostaddr).  Instead, it
returned the complete host connection parameter (which could contain
multiple hosts) or the default host details, which was confusing and
arguably incorrect.

Change this to return the actually connected host or hostaddr
irrespective of the connection type.  When hostaddr but no host was
specified, hostaddr is now returned.  Never return the original host
connection parameter, and document that PQhost cannot be relied on
before the connection is established.

PQport is similarly changed to always return the active connection port
and never the original connection parameter.

Author: Hari Babu <kommi.haribabu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>

Commit 920a5e50 add tests which should be
skipped on Windows boxes, but patch doesn't contain right count of them.

David Steel

Do not store temp tables in basebackup, they will not be visible anyway, so,
there are not reasons to store them.

Author: David Steel
Reviewed by: me
Discussion: https://www.postgresql.org/message-id/flat/5ea4d26a-a453-c1b7-eff9-5a3ef8f8aceb@pgmasters.net

Add page-level predicate locking, due to gist's code organization, patch seems
close to trivial: add check before page changing, add predicate lock before page
scanning.  Although choosing right place to check is not simple: it should not
be called during index build, it should support insertion of new downlink and so
on.

Author: Shubham Barai with editorization by me and Alexander Korotkov
Reviewed by: Alexander Korotkov, Andrey Borodin, me
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPtdcANpw5ePU3LvnTP8HCENFw6wygupQAyNBgD-sG3h0g@mail.gmail.com

This is mostly done to be able to validate features and fixes
submitted to LLVM. Given the size of these changes that seems
acceptable.

Author: Andres Freund

Due to the differing APIs between versions, I forgot to deallocate the
generated module in older LLVM versions, leading to a memory leak.

Author: Andres Freund

The tests in e2f1eb0e ("Implement partition-wise
grouping/aggregation.") weren't independent of the server's
max_parallel_workers_per_gather setting.  I (Andres) find it useful to
locally run with that disabled, and the aforementioned patch broke
this.

Author: Jeevan Chalke
Discussion:
    https://postgr.es/m/20180322210703.qmga3vsxqmiiypci@alap3.anarazel.de
    https://postgr.es/m/CAM2+6=UNWGKTgh9aOn4=SQ72HfFzbVFseh9=5N54bD6KB+D9OQ@mail.gmail.com