Skip to content

P
Postgres FD Implementation
Commit b6f18b2c authored by Peter Eisentraut's avatar Peter Eisentraut
Browse files
Options

Rebuild from source.

parent 3ac85b86
Show whitespace changes
Inline Side-by-side
Showing with 218 additions and 183 deletions
INSTALL
View file @ b6f18b2c
......@@ -24,7 +24,7 @@ The long version is the rest of this document.
Requirements
In general, a modern Unix-compatible platform should be able to run
PostgreSQL. The platforms that had received explicit testing at the time of
PostgreSQL. The platforms that had received specific testing at the time of
release are listed in the Section called Supported Platforms below. In the
"doc" subdirectory of the distribution there are several platform-specific
FAQ documents you might wish to consult if you are having trouble.
......@@ -38,27 +38,29 @@ The following prerequisites exist for building PostgreSQL:
gmake --version
If at all possible you should use version 3.76.1 or later.
It is recommended to use version 3.76.1 or later.
* You need an ISO/ANSI C compiler. Recent versions of GCC are
recommendable, but PostgreSQL is known to build with a wide variety of
compilers from different vendors.
* gzip
* gzip is needed to unpack the distribution in the first place. If you
are reading this, you probably already got past that hurdle.
* The GNU Readline library for comfortable line editing and command
history retrieval will automatically be used if found. You might wish
to install it before proceeding, but it is not required. (On NetBSD,
* The GNU Readline library (for comfortable line editing and command
history retrieval) will automatically be used if found. You might wish
to install it before proceeding, but it is not essential. (On NetBSD,
the "libedit" library is readline-compatible and is used if
"libreadline" is not found.)
* Flex and Bison are *not* required when building from a released source
package because the output files are pre-generated. You will need these
programs only when building from a CVS tree or when the actual scanner
and parser definition files were changed. If you need them, be sure to
get Flex 2.5.4 or later and Bison 1.28 or later. Other yacc programs
can sometimes be used, but doing so requires extra efforts and is not
recommended. Other lex programs will definitely not work.
* GNU Flex and Bison are needed to build from scratch, but they are *not*
required when building from a released source package because
pre-generated output files are included in released packages. You will
need these programs only when building from a CVS tree or if you
changed the actual scanner and parser definition files. If you need
them, be sure to get Flex 2.5.4 or later and Bison 1.28 or later. Other
yacc programs can sometimes be used, but doing so requires extra effort
and is not recommended. Other lex programs will definitely not work.
* To build on Windows NT or Windows 2000 you need the Cygwin and cygipc
packages. See the file "doc/FAQ_MSWIN" for details.
......@@ -96,10 +98,11 @@ here. These instructions assume that your existing installation is under the
pg_dumpall > outputfile
If you need to preserve the OIDs (such as when using them as foreign
keys), then use the "-o" option when running "pg_dumpall". "pg_dumpall"
does not save large objects. Check the Administrator's Guide if you
need to do this.
If you need to preserve OIDs (such as when using them as foreign keys),
then use the "-o" option when running "pg_dumpall".
"pg_dumpall" does not save large objects. Check the Administrator's
Guide if you need to do this.
Make sure that you use the "pg_dumpall" command from the version you
are currently running. 7.2's "pg_dumpall" should not be used on older
......@@ -122,11 +125,11 @@ here. These instructions assume that your existing installation is under the
/etc/rc.d/init.d/postgresql stop
works.
works. Another possibility is "pg_ctl stop".
4. If you are installing in the same place as the old version then it is
also a good idea to move the old installation out of the way, in case
you still need it later on. Use a command like this:
you have trouble and need to revert to it. Use a command like this:
mv /usr/local/pgsql /usr/local/pgsql.old
......@@ -163,11 +166,11 @@ Installation Procedure
This script will run a number of tests to guess values for various
system dependent variables and detect some quirks of your operating
system, and finally creates several files in the build tree to record
what it found.
system, and finally will create several files in the build tree to
record what it found.
The default configuration will build the server and utilities, as well
as all client applications and interfaces that only require a C
as all client applications and interfaces that require only a C
compiler. All files will be installed under "/usr/local/pgsql" by
default.
......@@ -246,17 +249,17 @@ Installation Procedure
and are namespace-clean. The internal header files and the
server header files are installed into private directories
under includedir. See the Programmer's Guide for information
how to get at the header files for each interface. Finally, a
private subdirectory will also be created, if appropriate,
under libdir for dynamically loadable modules.
about how to get at the header files for each interface.
Finally, a private subdirectory will also be created, if
appropriate, under libdir for dynamically loadable modules.
--with-includes=DIRECTORIES
"DIRECTORIES" is a colon-separated list of directories that will
be added to the list the compiler searches for header files. If
you have optional packages (such as GNU Readline) installed in a
non-standard location you have to use this option and probably the
corresponding "--with-libraries" option.
non-standard location, you have to use this option and probably
also the corresponding "--with-libraries" option.
Example: --with-includes=/opt/gnu/include:/usr/sup/include.
......@@ -293,12 +296,12 @@ Installation Procedure
--enable-nls[=LANGUAGES]
Enables Native Language Support (NLS), that is, the ability to
display a program's message in a language other than English.
display a program's messages in a language other than English.
"LANGUAGES" is a space separated list of codes of the languages
that you want supported. (The intersection between your list and
the set of actually provided translations will be computed
automatically.) If you do not specify it, then all available
translations are installed.
that you want supported, for example --enable-nls='de fr'. (The
intersection between your list and the set of actually provided
translations will be computed automatically.) If you do not
specify a list, then all available translations are installed.
To use this option, you will need an implementation of the gettext
API. Some operating systems have this built-in (e.g., Linux,
......@@ -314,7 +317,9 @@ Installation Procedure
Set "NUMBER" as the default port number for server and clients.
The default is 5432. The port can always be changed later on, but
if you specify it here then both server and clients will have the
same default compiled in, which can be very convenient.
same default compiled in, which can be very convenient. Usually
the only good reason to select a non-default value is if you
intend to run multiple PostgreSQL servers on the same machine.
--with-CXX
......@@ -350,19 +355,20 @@ Installation Procedure
--with-tclconfig=DIRECTORY, --with-tkconfig=DIRECTORY
Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh" which
contain certain configuration information that is needed to build
modules interfacing to Tcl or Tk. These files are normally found
automatically at their well-known location, but if you want to use
a different version of Tcl or Tk you can specify the directory
where to find them.
Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh", which
contain configuration information needed to build modules
interfacing to Tcl or Tk. These files are normally found
automatically at their well-known locations, but if you want to
use a different version of Tcl or Tk you can specify the directory
in which to find them.
--enable-odbc
Build the ODBC driver. By default, the driver will be independent
of a driver manager. To work better with a driver manager already
installed on your system, use one of the following options. More
information can be found in the Programmer's Guide.
installed on your system, use one of the following options in
addition to this one. More information can be found in the
Programmer's Guide.
--with-iodbc
......@@ -385,12 +391,19 @@ Installation Procedure
that case the driver manager handles the location of the
configuration file.
--with-krb4=DIRECTORY, --with-krb5=DIRECTORY
--with-java
Build the JDBC driver and associated Java packages. This option
requires Ant to be installed (as well as a JDK, of course). Refer
to the JDBC driver documentation in the Programmer's Guide for
more information.
--with-krb4[=DIRECTORY], --with-krb5[=DIRECTORY]
Build with support for Kerberos authentication. You can use either
Kerberos version 4 or 5, but not both. The "DIRECTORY" argument
specifies the root directory of the Kerberos installation;
"/usr/athena" is assumed as default. If the relevant headers files
"/usr/athena" is assumed as default. If the relevant header files
and libraries are not under a common parent directory, then you
must use the "--with-includes" and "--with-libraries" options in
addition to this option. If, on the other hand, the required files
......@@ -406,7 +419,7 @@ Installation Procedure
The name of the Kerberos service principal. postgres is the
default. There's probably no reason to change this.
--with-openssl=DIRECTORY
--with-openssl[=DIRECTORY]
Build with support for SSL (encrypted) connections. This requires
the OpenSSL package to be installed. The "DIRECTORY" argument
......@@ -417,19 +430,16 @@ Installation Procedure
to make sure that your OpenSSL installation is sufficient before
proceeding.
--with-java
--with-pam
Build the JDBC driver and associated Java packages. This option
requires Ant to be installed (as well as a JDK, of course). Refer
to the JDBC driver documentation in the Programmer's Guide for
more information.
Build with PAM (Pluggable Authentication Modules) support.
--enable-syslog
Enables the PostgreSQL server to use the syslog logging facility.
(Using this option does not mean that you must log with syslog or
even that it will be done by default, it simply makes it possible
to turn this option on at run time.)
to turn that option on at run time.)
--enable-debug
......@@ -439,9 +449,10 @@ Installation Procedure
considerably, and on non-GCC compilers it usually also disables
compiler optimization, causing slowdowns. However, having the
symbols available is extremely helpful for dealing with any
problems that may arise. Currently, this option is considered of
marginal value for production installations, but you should have
it on if you are doing development work or running a beta version.
problems that may arise. Currently, this option is recommended for
production installations only if you use GCC. But you should
always have it on if you are doing development work or running a
beta version.
--enable-cassert
......@@ -456,13 +467,22 @@ Installation Procedure
you should have it on for development work or when running a beta
version.
--enable-depend
Enables automatic dependency tracking. With this option, the
makefiles are set up so that all affected object files will be
rebuilt when any header file is changed. This is useful if you are
doing development work, but is just wasted overhead if you intend
only to compile once and install. At present, this option will
work only if you use GCC.
If you prefer a C or C++ compiler different from the one "configure"
picks then you can set the environment variables CC and CXX,
picks then you can set the environment variables CC or CXX,
respectively, to the program of your choice. Similarly, you can
override the default compiler flags with the CFLAGS and CXXFLAGS
variables. For example:
env CC=/opt/bin/gcc CFLAGS='-02 -pipe' ./configure
env CC=/opt/bin/gcc CFLAGS='-O2 -pipe' ./configure
2. Build
......@@ -470,8 +490,9 @@ Installation Procedure
gmake
(Remember to use GNU make.) The build can take anywhere from 5 minutes
to half an hour. The last line displayed should be
(Remember to use GNU make.) The build may take anywhere from 5 minutes
to half an hour depending on your hardware. The last line displayed
should be
All of PostgreSQL is successfully made. Ready to install.
......@@ -494,7 +515,7 @@ Installation Procedure
4. Installing The Files
Note: If you are upgrading an existing system and are going
to install the new files over the old ones then you should
to install the new files over the old ones, then you should
have backed up your data and shut down the old server by now,
as explained in the Section called If You Are Upgrading
above.
......@@ -521,11 +542,11 @@ Installation Procedure
take the required files and place them in other directories where Perl
or Python can find them, but how to do that is left as an exercise.
The standard install installs only the header files needed for client
application development. If you plan to do any server-side program
development (such as custom functions or data types written in C), then
you may want to install the entire PostgreSQL include tree into your
target include directory. To do that, enter
The standard installation provides only the header files needed for
client application development. If you plan to do any server-side
program development (such as custom functions or data types written in
C), then you may want to install the entire PostgreSQL include tree
into your target include directory. To do that, enter
gmake install-all-headers
......@@ -534,24 +555,31 @@ Installation Procedure
reference. (If you do, you can just use the source's include directory
when building server-side software.)
Client-only installation. If you want to install only the client
Client-only installation: If you want to install only the client
applications and interface libraries, then you can use these commands:
gmake -C src/bin install
gmake -C src/include install
gmake -C src/interfaces install
gmake -C doc install
To undo the installation use the command "gmake uninstall". However,
this will not remove any directories.
this will not remove any created directories.
After the installation you can make room by removing the built files from
the source tree with the "gmake clean" command. This will preserve the
choices made by the configure program, so that you can rebuild everything
with "gmake" later on. To reset the source tree to the state in which it was
the source tree with the "gmake clean" command. This will preserve the files
made by the configure program, so that you can rebuild everything with
"gmake" later on. To reset the source tree to the state in which it was
distributed, use "gmake distclean". If you are going to build for several
platforms from the same source tree you must do this and re-configure for
each build.
If you perform a build and then discover that your configure options were
wrong, or if you change anything that configure investigates (for example,
you install GNU Readline), then it's a good idea to do "gmake distclean"
before reconfiguring and rebuilding. Without this, your changes in
configuration choices may not propagate everywhere they need to.
------------------------------------------------------------------------
Post-Installation Setup
......@@ -578,7 +606,7 @@ setenv LD_LIBRARY_PATH /usr/local/pgsql/lib
Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in step 1.
You should put these commands into a shell start-up file such as
"/etc/profile" or "~/.bash_profile". Some good information about the caveats
associated with the method can be found at
associated with this method can be found at
http://www.visi.com/~barr/ldpath.html.
On some systems it might be preferable to set the environment variable
......@@ -610,8 +638,8 @@ Environment Variables
If you installed into "/usr/local/pgsql" or some other location that is not
searched for programs by default, you need to add "/usr/local/pgsql/bin" (or
what you set "--bindir" to in step 1) into your PATH. To do this, add the
following to your shell start-up file, such as "~/.bash_profile" (or
whatever you set "--bindir" to in step 1) into your PATH. To do this, add
the following to your shell start-up file, such as "~/.bash_profile" (or
"/etc/profile", if you want it to affect every user):
PATH=/usr/local/pgsql/bin:$PATH
......@@ -628,8 +656,8 @@ MANPATH=/usr/local/pgsql/man:$MANPATH
The environment variables PGHOST and PGPORT specify to client applications
the host and port of the database server, overriding the compiled-in
defaults. If you are going to run client applications remotely then it is
convenient if every user that plans to use the database sets PGHOST, but it
is not required and the settings can be communicated via command line
convenient if every user that plans to use the database sets PGHOST. This is
not required, however: the settings can be communicated via command line
options to most client programs.
------------------------------------------------------------------------
......@@ -696,15 +724,17 @@ once installed. The Administrator's Guide contains more information.
What Now?
* The Tutorial should be your first reading if you are completely new to
SQL databases. It should have been installed at
"/usr/local/pgsql/doc/html/tutorial.html" unless you changed the
* The PostgreSQL distribution contains a comprehensive documentation set,
which you should read sometime. After installation, the documentation
can be accessed by pointing your browser to
"/usr/local/pgsql/doc/html/index.html", unless you changed the
installation directories.
* If you are familiar with database concepts then you want to proceed
with the Administrator's Guide, which contains information about how to
set up the database server, database users, and authentication. It can
be found at "/usr/local/pgsql/doc/html/admin.html".
The Tutorial should be your first reading if you are completely new to
SQL databases. If you are familiar with database concepts then you want
to proceed with the Administrator's Guide, which contains information
about how to set up the database server, database users, and
authentication.
* Usually, you will want to modify your computer so that it will
automatically start the database server whenever it boots. Some
......@@ -729,108 +759,113 @@ tests pass.
<pgsql-ports@postgresql.org>, not to the people listed here.
OS Processor Version Reported Remarks
AIX 4.3.3RS6000 7.1 2001-03-21, Gilles Darold see also
(<gilles@darold.net>) doc/FAQ_AIX
BeOS x86 7.1 2001-02-26, Cyril Velter requires new
5.0.4 (<cyril.velter@libertysurf.fr>) BONE networking
stack
BSD/OS x86 7.1 2001-03-20, Bruce Momjian
4.01 (<pgman@candle.pha.pa.us>)
FreeBSD x86 7.2 2001-11-14, Chris Kings-Lynne
AIX RS6000 7.2 2001-12-19, Andreas Zeugswetter see also
(<ZeugswetterA@spardat.at>), doc/FAQ_AIX
Tatsuo Ishii
(<t-ishii@sra.co.jp>)
BeOS x86 7.2 2001-11-29, Cyril Velter 5.0.4
(<cyril.velter@libertysurf.fr>)
BSD/OS x86 7.2 2001-11-27, Bruce Momjian 4.2
(<pgman@candle.pha.pa.us>)
FreeBSDAlpha 7.2 2001-12-18, Chris Kings-Lynne
(<chriskl@familyhealth.com.au>)
HP-UX PA-RISC 7.2 2001-11-16, 10.20 Tom Lane 32- and 64-bit
(<tgl@sss.pgh.pa.us>), 2001-03-22, on 11.00; see
11.00, 11i Giles Lean also
(<giles@nemeton.com.au>) doc/FAQ_HPUX
IRIX MIPS 7.1 2001-03-22, Robert Bruccoleri 32-bit
6.5.11 (<bruc@acm.org>) compilation
model
Linux Alpha 7.2 2001-11-16, Tom Lane Tested at
2.2.18 (<tgl@sss.pgh.pa.us>) SourceForge
Linux armv4l 7.1 2001-02-22, Mark Knox
2.2.x (<segfault@hardline.org>)
Linux MIPS 7.2 2001-11-15, Hisao Shibuya Cobalt Qube2
2.0.x (<shibuya@alpha.or.jp>)
Linux PPC74xx 7.2 2001-11-16, Tom Lane Apple G3
2.2.18 (<tgl@sss.pgh.pa.us>)
Linux S/390 7.1 2000-11-17, Neale Ferguson
(<Neale.Ferguson@softwareAG-usa.com>)
Linux Sparc 7.1 2001-01-30, Ryan Kirkpatrick
2.2.15 (<pgsql@rkirkpat.net>)
FreeBSDx86 7.2 2001-11-14, Chris Kings-Lynne
(<chriskl@familyhealth.com.au>)
HP-UX PA-RISC 7.2 2001-11-29, Joseph Conway 11.00 and 10.20;
(<Joseph.Conway@home.com>), Tom see also
Lane (<tgl@sss.pgh.pa.us>) doc/FAQ_HPUX
IRIX MIPS 7.2 2001-11-28, Luis Amigo 6.5.13, MIPSPro
(<lamigo@atc.unican.es>) 7.30
Linux Alpha 7.2 2001-11-16, Tom Lane 2.2.18; tested at
(<tgl@sss.pgh.pa.us>) SourceForge
Linux armv4l 7.2 2001-12-10, Mark Knox 2.2.x
(<segfault@hardline.org>)
Linux MIPS 7.2 2001-11-15, Hisao Shibuya 2.0.x; Cobalt
(<shibuya@alpha.or.jp>) Qube2
Linux PlayStation 7.2 2001-12-12, Permaine Cheung #undef
2 <pcheung@redhat.com>) HAS_TEST_AND_SET,
slock_t
Linux PPC74xx 7.2 2001-11-16, Tom Lane 2.2.18; Apple G3
(<tgl@sss.pgh.pa.us>)
Linux S/390 7.2 2001-12-12, Permaine Cheung
<pcheung@redhat.com>)
Linux Sparc 7.2 2001-11-28, Doug McNaught 2.2.19
(<doug@wireboard.com>)
Linux x86 7.2 2001-11-15, Thomas Lockhart 2.0.x, 2.2.x,
(<lockhart@fourpalms.org>) 2.4.x
MacOS X PPC 7.2 2001-11-16, Tom Lane Darwin 10.1
(<tgl@sss.pgh.pa.us>)
NetBSD Alpha 7.2 2001-11-20, Thomas Thai
1.5W (<tom@minnesota.com>)
NetBSD arm32 7.1 2001-03-21, Patrick Welche
1.5E (<prlw1@cam.ac.uk>)
MacOS XPPC 7.2 2001-11-28, Gavin Sherry 10.1.x
(<swm@linuxworld.com.au>)
NetBSD Alpha 7.2 2001-11-20, Thomas Thai 1.5W
(<tom@minnesota.com>)
NetBSD arm32 7.1 2001-03-21, Patrick Welche 1.5E
(<prlw1@cam.ac.uk>)
NetBSD m68k 7.0 2000-04-10, Henry B. Hotz Mac 8xx
(<hotz@jpl.nasa.gov>)
NetBSD PPC 7.1 2001-04-05, Henry B. Hotz Mac G4
(<hotz@jpl.nasa.gov>)
NetBSD Sparc 7.1 2000-04-05, Matthew Green 32- and 64-bit
NetBSD PPC 7.2 2001-11-28, Bill Studenmund 1.5
(<wrstuden@netbsd.org>)
NetBSD Sparc 7.2 2001-12-03, Matthew Green 32- and 64-bit
(<mrg@eterna.com.au>) builds
NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo
1.5 (<tih@kpnQwest.no>)
NetBSD x86 7.1 2001-03-23, Giles Lean
1.5 (<giles@nemeton.com.au>)
OpenBSD Sparc 7.1 2001-03-23, Brandon Palmer
2.8 (<bpalmer@crimelabs.net>)
OpenBSD x86 7.1 2001-03-21, Brandon Palmer
2.8 (<bpalmer@crimelabs.net>)
SCO x86 7.1 2001-03-19, Larry Rosenman UDK FS compiler;
UnixWare (<ler@lerctr.org>) see also
7.1.1 doc/FAQ_SCO
Solaris Sparc 7.2 2001-11-12, Andrew Sullivan 2.6-8; see also
NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo 1.5
(<tih@kpnQwest.no>)
NetBSD x86 7.2 2001-11-28, Bill Studenmund 1.5
(<wrstuden@netbsd.org>)
OpenBSDSparc 7.2 2001-11-27, Brandon Palmer 3.0
(<bpalmer@crimelabs.net>)
OpenBSDx86 7.2 2001-11-26, Brandon Palmer 3.0
(<bpalmer@crimelabs.net>)
Open x86 7.2 2001-11-28, OU-8 Larry Rosenman see also
UNIX (<ler@lerctr.org>), UW-7 Olivier doc/FAQ_SCO
Prenant (<ohp@pyrenet.fr>)
QNX 4 x86 7.2 2001-12-10, Bernd Tegge 4.25; see also
RTOS (<tegge@repas-aeg.de>) doc/FAQ_QNX4
SolarisSparc 7.2 2001-11-12, Andrew Sullivan 2.6-8; see also
(<andrew@libertyrms.com>) doc/FAQ_Solaris
Solaris x86 7.1 2001-03-27, Mathijs Brands see also
2.8 (<mathijs@ilse.nl>) doc/FAQ_Solaris
SunOS Sparc 7.1 2001-03-23, Tatsuo Ishii
4.1.4 (<t-ishii@sra.co.jp>)
Tru64 Alpha 7.1 2001-03-26, Adriaan Joubert 4.0-5.0, cc and
UNIX (<a.joubert@albourne.com>) gcc
Windows x86 7.1 2001-03-16, Jason Tishler with Cygwin tool
NT/2000 (<Jason.Tishler@dothill.com>) set, see
with doc/FAQ_MSWIN
Cygwin
Unsupported Platforms. The following platforms have not been verified to
work. Platforms listed for version 6.3.x and later should also work with
7.2, but we did not receive explicit confirmation of such at the time this
list was compiled. We include these here to let you know that these
platforms *could* be supported if given some attention.
OS ProcessorVersion Reported Remarks
DGUX m88k 6.3 1998-03-01, Brian E Gallew 6.4 probably OK
5.4R4.11 (<geek+@cmu.edu>)
MkLinux DR1 PPC750 7.0 2001-04-03, Tatsuo Ishii 7.1 needs OS
Solarisx86 7.2 2001-11-28, Martin Renters 2.8; see also
(<martin@datafax.com>) doc/FAQ_Solaris
SunOS 4Sparc 7.2 2001-12-04, Tatsuo Ishii
(<t-ishii@sra.co.jp>)
Tru64 Alpha 7.2 2001-11-26, Alessio Bragadini 5.0; 4.0g with cc
UNIX (<alessio@albourne.com>), Bernd and gcc
Tegge (<tegge@repas-aeg.de>)
Windowsx86 7.2 2001-12-13, Dave Page with Cygwin; see
(<dpage@vale-housing.co.uk>), doc/FAQ_MSWIN
Jason Tishler
(<jason@tishler.net>)
Windowsx86 7.2 2001-12-10, Dave Page native is
(<dpage@vale-housing.co.uk>) client-side only;
see
Administrator's
Guide
Unsupported Platforms: The following platforms are either known not to work,
or they used to work in a previous release and we did not receive explicit
confirmation of a successful test with version 7.2 at the time this list was
compiled. We include these here to let you know that these platforms *could*
be supported if given some attention.
OS Processor Version Reported Remarks
DG/UX m88k 6.3 1998-03-01, Brian E Gallew no recent
5.4R4.11 (<geek+@cmu.edu>) reports
MkLinux DR1PPC750 7.0 2001-04-03, Tatsuo Ishii 7.1 needs OS
(<t-ishii@sra.co.jp>) update?
NextStep x86 6.x 1998-03-01, David Wetzel bit rot suspected
(<dave@turbocat.de>)
QNX 4.25 x86 7.0 2000-04-01, Dr. Andreas Spinlock code
Kardos needs work. See
(<kardos@repas-aeg.de>) also
doc/FAQ_QNX4.
SCO x86 6.5 1999-05-25, Andrew Merrill 7.1 should work,
OpenServer (<andrew@compclass.com>) but no reports;
5 see also
NeXTSTEP x86 6.x 1998-03-01, David Wetzel bit rot
(<dave@turbocat.de>) suspected
QNX RTOS v6x86 7.2 2001-11-20, Igor Kovalenko patches
(<Igor.Kovalenko@motorola.com>) available in
archives,
but too late
for 7.2
SCO x86 6.5 1999-05-25, Andrew Merrill 7.2 should
OpenServer (<andrew@compclass.com>) work, but no
5 reports; see
also
doc/FAQ_SCO
System V R4 m88k 6.2.1 1998-03-01, Doug Winterburn needs new TAS
(<dlw@seavme.xroads.com>) spinlock code
System V R4 MIPS 6.4 1998-10-28, Frank no 64-bit integer
Ridderbusch
(<ridderbusch.pad@sni.de>)
Ultrix MIPS 7.1 2001-03-26 TAS spinlock code
not detected
Ultrix VAX 6.x 1998-03-01 No recent
reports.
Obsolete?
Windows 9x, x86 7.1 2001-03-26, Magnus Hagander client-side
ME, NT, (<mha@sollentuna.net>) libraries (libpq
2000 and psql) or ODBC
(native) or JDBC, no
server-side; see
Administrator's
Guide for
instructions
System V R4m88k 6.2.1 1998-03-01, Doug Winterburn needs new
(<dlw@seavme.xroads.com>) TAS spinlock
code
System V R4MIPS 6.4 1998-10-28, Frank Ridderbusch no recent
(<ridderbusch.pad@sni.de>) reports
Ultrix MIPS 7.1 2001-03-26 TAS spinlock
code not
detected
Ultrix VAX 6.x 1998-03-01
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment