Skip to content

P
Postgres FD Implementation
Commit 8366c780 authored by Simon Riggs's avatar Simon Riggs
Browse files
Options

Allow pg_basebackup from standby node with safety checking. 

Base backup follows recommended procedure, plus goes to great
lengths to ensure that partial page writes are avoided.

Jun Ishizuka and Fujii Masao, with minor modifications
parent 74ab96a4
Hide whitespace changes
Inline Side-by-side
Showing with 501 additions and 44 deletions
doc/src/sgml/ref/pg_basebackup.sgml
View file @ 8366c780
......@@ -64,6 +64,48 @@ PostgreSQL documentation
better from a performance point of view to take only one backup, and copy
the result.
</para>
<para>
<application>pg_basebackup</application> can make a base backup from
not only the master but also the standby. To take a backup from the standby,
set up the standby so that it can accept replication connections (that is, set
<varname>max_wal_senders</> and <xref linkend="guc-hot-standby">,
and configure <link linkend="auth-pg-hba-conf">host-based authentication</link>).
You will also need to enable <xref linkend="guc-full-page-writes"> on the master.
</para>
<para>
Note that there are some limitations in an online backup from the standby:
<itemizedlist>
<listitem>
<para>
The backup history file is not created in the database cluster backed up.
</para>
</listitem>
<listitem>
<para>
There is no guarantee that all WAL files required for the backup are archived
at the end of backup. If you are planning to use the backup for an archive
recovery and want to ensure that all required files are available at that moment,
you need to include them into the backup by using <literal>-x</> option.
</para>
</listitem>
<listitem>
<para>
If the standby is promoted to the master during online backup, the backup fails.
</para>
</listitem>
<listitem>
<para>
All WAL records required for the backup must contain sufficient full-page writes,
which requires you to enable <varname>full_page_writes</> on the master and
not to use the tool like <application>pg_compresslog</> as
<varname>archive_command</> to remove full-page writes from WAL files.
</para>
</listitem>
</itemizedlist>
</para>
</refsect1>
<refsect1>
......
src/backend/access/transam/xlog.c
View file @ 8366c780
......@@ -156,6 +156,14 @@ HotStandbyState standbyState = STANDBY_DISABLED;
static XLogRecPtr LastRec;
/*
* During recovery, lastFullPageWrites keeps track of full_page_writes that
* the replayed WAL records indicate. It's initialized with full_page_writes
* that the recovery starting checkpoint record indicates, and then updated
* each time XLOG_FPW_CHANGE record is replayed.
*/
static bool lastFullPageWrites;
/*
* Local copy of SharedRecoveryInProgress variable. True actually means "not
* known, need to check the shared state".
......@@ -354,6 +362,15 @@ typedef struct XLogCtlInsert
XLogRecPtr RedoRecPtr; /* current redo point for insertions */
bool forcePageWrites; /* forcing full-page writes for PITR? */
/*
* fullPageWrites is the master copy used by all backends to determine
* whether to write full-page to WAL, instead of using process-local
* one. This is required because, when full_page_writes is changed
* by SIGHUP, we must WAL-log it before it actually affects
* WAL-logging by backends. Checkpointer sets at startup or after SIGHUP.
*/
bool fullPageWrites;
/*
* exclusiveBackup is true if a backup started with pg_start_backup() is
* in progress, and nonExclusiveBackups is a counter indicating the number
......@@ -460,6 +477,12 @@ typedef struct XLogCtlData
/* Are we requested to pause recovery? */
bool recoveryPause;
/*
* lastFpwDisableRecPtr points to the start of the last replayed
* XLOG_FPW_CHANGE record that instructs full_page_writes is disabled.
*/
XLogRecPtr lastFpwDisableRecPtr;
slock_t info_lck; /* locks shared variables shown above */
} XLogCtlData;
......@@ -663,7 +686,7 @@ static void xlog_outrec(StringInfo buf, XLogRecord *record);
#endif
static void pg_start_backup_callback(int code, Datum arg);
static bool read_backup_label(XLogRecPtr *checkPointLoc,
bool *backupEndRequired);
bool *backupEndRequired, bool *backupFromStandby);
static void rm_redo_error_callback(void *arg);
static int get_sync_bit(int method);
......@@ -708,7 +731,8 @@ XLogInsert(RmgrId rmid, uint8 info, XLogRecData *rdata)
unsigned i;
bool updrqst;
bool doPageWrites;
bool isLogSwitch = (rmid == RM_XLOG_ID && info == XLOG_SWITCH);
bool isLogSwitch = false;
bool fpwChange = false;
uint8 info_orig = info;
/* cross-check on whether we should be here or not */
......@@ -722,11 +746,30 @@ XLogInsert(RmgrId rmid, uint8 info, XLogRecData *rdata)
TRACE_POSTGRESQL_XLOG_INSERT(rmid, info);
/*
* In bootstrap mode, we don't actually log anything but XLOG resources;
* return a phony record pointer.
* Handle special cases/records.
*/
if (IsBootstrapProcessingMode() && rmid != RM_XLOG_ID)
if (rmid == RM_XLOG_ID)
{
switch (info)
{
case XLOG_SWITCH:
isLogSwitch = true;
break;
case XLOG_FPW_CHANGE:
fpwChange = true;
break;
default:
break;
}
}
else if (IsBootstrapProcessingMode())
{
/*
* In bootstrap mode, we don't actually log anything but XLOG resources;
* return a phony record pointer.
*/
RecPtr.xlogid = 0;
RecPtr.xrecoff = SizeOfXLogLongPHD; /* start of 1st chkpt record */
return RecPtr;
......@@ -756,10 +799,10 @@ begin:;
/*
* Decide if we need to do full-page writes in this XLOG record: true if
* full_page_writes is on or we have a PITR request for it. Since we
* don't yet have the insert lock, forcePageWrites could change under us,
* but we'll recheck it once we have the lock.
* don't yet have the insert lock, fullPageWrites and forcePageWrites
* could change under us, but we'll recheck them once we have the lock.
*/
doPageWrites = fullPageWrites || Insert->forcePageWrites;
doPageWrites = Insert->fullPageWrites || Insert->forcePageWrites;
len = 0;
for (rdt = rdata;;)
......@@ -939,12 +982,12 @@ begin:;
}
/*
* Also check to see if forcePageWrites was just turned on; if we weren't
* already doing full-page writes then go back and recompute. (If it was
* just turned off, we could recompute the record without full pages, but
* we choose not to bother.)
* Also check to see if fullPageWrites or forcePageWrites was just turned on;
* if we weren't already doing full-page writes then go back and recompute.
* (If it was just turned off, we could recompute the record without full pages,
* but we choose not to bother.)
*/
if (Insert->forcePageWrites && !doPageWrites)
if ((Insert->fullPageWrites || Insert->forcePageWrites) && !doPageWrites)
{
/* Oops, must redo it with full-page data. */
LWLockRelease(WALInsertLock);
......@@ -1189,6 +1232,15 @@ begin:;
WriteRqst = XLogCtl->xlblocks[curridx];
}
/*
* If the record is an XLOG_FPW_CHANGE, we update full_page_writes
* in shared memory before releasing WALInsertLock. This ensures that
* an XLOG_FPW_CHANGE record precedes any WAL record affected
* by this change of full_page_writes.
*/
if (fpwChange)
Insert->fullPageWrites = fullPageWrites;
LWLockRelease(WALInsertLock);
if (updrqst)
......@@ -5147,6 +5199,7 @@ BootStrapXLOG(void)
checkPoint.redo.xlogid = 0;
checkPoint.redo.xrecoff = XLogSegSize + SizeOfXLogLongPHD;
checkPoint.ThisTimeLineID = ThisTimeLineID;
checkPoint.fullPageWrites = fullPageWrites;
checkPoint.nextXidEpoch = 0;
checkPoint.nextXid = FirstNormalTransactionId;
checkPoint.nextOid = FirstBootstrapObjectId;
......@@ -5961,6 +6014,8 @@ StartupXLOG(void)
uint32 freespace;
TransactionId oldestActiveXID;
bool backupEndRequired = false;
bool backupFromStandby = false;
DBState dbstate_at_startup;
/*
* Read control file and check XLOG status looks valid.
......@@ -6094,7 +6149,8 @@ StartupXLOG(void)
if (StandbyMode)
OwnLatch(&XLogCtl->recoveryWakeupLatch);
if (read_backup_label(&checkPointLoc, &backupEndRequired))
if (read_backup_label(&checkPointLoc, &backupEndRequired,
&backupFromStandby))
{
/*
* When a backup_label file is present, we want to roll forward from
......@@ -6210,6 +6266,8 @@ StartupXLOG(void)
*/
ThisTimeLineID = checkPoint.ThisTimeLineID;
lastFullPageWrites = checkPoint.fullPageWrites;
RedoRecPtr = XLogCtl->Insert.RedoRecPtr = checkPoint.redo;
if (XLByteLT(RecPtr, checkPoint.redo))
......@@ -6250,6 +6308,7 @@ StartupXLOG(void)
* pg_control with any minimum recovery stop point obtained from a
* backup history file.
*/
dbstate_at_startup = ControlFile->state;
if (InArchiveRecovery)
ControlFile->state = DB_IN_ARCHIVE_RECOVERY;
else
......@@ -6270,12 +6329,28 @@ StartupXLOG(void)
}
/*
* set backupStartPoint if we're starting recovery from a base backup
* Set backupStartPoint if we're starting recovery from a base backup.
*
* Set backupEndPoint and use minRecoveryPoint as the backup end location
* if we're starting recovery from a base backup which was taken from
* the standby. In this case, the database system status in pg_control must
* indicate DB_IN_ARCHIVE_RECOVERY. If not, which means that backup
* is corrupted, so we cancel recovery.
*/
if (haveBackupLabel)
{
ControlFile->backupStartPoint = checkPoint.redo;
ControlFile->backupEndRequired = backupEndRequired;
if (backupFromStandby)
{
if (dbstate_at_startup != DB_IN_ARCHIVE_RECOVERY)
ereport(FATAL,
(errmsg("backup_label contains inconsistent data with control file"),
errhint("This means that the backup is corrupted and you will "
"have to use another backup for recovery.")));
ControlFile->backupEndPoint = ControlFile->minRecoveryPoint;
}
}
ControlFile->time = (pg_time_t) time(NULL);
/* No need to hold ControlFileLock yet, we aren't up far enough */
......@@ -6564,6 +6639,27 @@ StartupXLOG(void)
/* Pop the error context stack */
error_context_stack = errcontext.previous;
if (!XLogRecPtrIsInvalid(ControlFile->backupStartPoint) &&
XLByteLE(ControlFile->backupEndPoint, EndRecPtr))
{
/*
* We have reached the end of base backup, the point where
* the minimum recovery point in pg_control indicates.
* The data on disk is now consistent. Reset backupStartPoint
* and backupEndPoint.
*/
elog(DEBUG1, "end of backup reached");
LWLockAcquire(ControlFileLock, LW_EXCLUSIVE);
MemSet(&ControlFile->backupStartPoint, 0, sizeof(XLogRecPtr));
MemSet(&ControlFile->backupEndPoint, 0, sizeof(XLogRecPtr));
ControlFile->backupEndRequired = false;
UpdateControlFile();
LWLockRelease(ControlFileLock);
}
/*
* Update shared recoveryLastRecPtr after this record has been
* replayed.
......@@ -6763,6 +6859,16 @@ StartupXLOG(void)
/* Pre-scan prepared transactions to find out the range of XIDs present */
oldestActiveXID = PrescanPreparedTransactions(NULL, NULL);
/*
* Update full_page_writes in shared memory and write an
* XLOG_FPW_CHANGE record before resource manager writes cleanup
* WAL records or checkpoint record is written.
*/
Insert->fullPageWrites = lastFullPageWrites;
LocalSetXLogInsertAllowed();
UpdateFullPageWrites();
LocalXLogInsertAllowed = -1;
if (InRecovery)
{
int rmid;
......@@ -7644,6 +7750,7 @@ CreateCheckPoint(int flags)
LocalSetXLogInsertAllowed();
checkPoint.ThisTimeLineID = ThisTimeLineID;
checkPoint.fullPageWrites = Insert->fullPageWrites;
/*
* Compute new REDO record ptr = location of next XLOG record.
......@@ -8358,6 +8465,48 @@ XLogReportParameters(void)
}
}
/*
* Update full_page_writes in shared memory, and write an
* XLOG_FPW_CHANGE record if necessary.
*/
void
UpdateFullPageWrites(void)
{
XLogCtlInsert *Insert = &XLogCtl->Insert;
/*
* Do nothing if full_page_writes has not been changed.
*
* It's safe to check the shared full_page_writes without the lock,
* because we can guarantee that there is no concurrently running
* process which can update it.
*/
if (fullPageWrites == Insert->fullPageWrites)
return;
/*
* Write an XLOG_FPW_CHANGE record. This allows us to keep
* track of full_page_writes during archive recovery, if required.
*/
if (XLogStandbyInfoActive() && !RecoveryInProgress())
{
XLogRecData rdata;
rdata.data = (char *) (&fullPageWrites);
rdata.len = sizeof(bool);
rdata.buffer = InvalidBuffer;
rdata.next = NULL;
XLogInsert(RM_XLOG_ID, XLOG_FPW_CHANGE, &rdata);
}
else
{
LWLockAcquire(WALInsertLock, LW_EXCLUSIVE);
Insert->fullPageWrites = fullPageWrites;
LWLockRelease(WALInsertLock);
}
}
/*
* XLOG resource manager's routines
*
......@@ -8402,7 +8551,8 @@ xlog_redo(XLogRecPtr lsn, XLogRecord *record)
* never arrive.
*/
if (InArchiveRecovery &&
!XLogRecPtrIsInvalid(ControlFile->backupStartPoint))
!XLogRecPtrIsInvalid(ControlFile->backupStartPoint) &&
XLogRecPtrIsInvalid(ControlFile->backupEndPoint))
ereport(ERROR,
(errmsg("online backup was canceled, recovery cannot continue")));
......@@ -8571,6 +8721,30 @@ xlog_redo(XLogRecPtr lsn, XLogRecord *record)
/* Check to see if any changes to max_connections give problems */
CheckRequiredParameterValues();
}
else if (info == XLOG_FPW_CHANGE)
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
bool fpw;
memcpy(&fpw, XLogRecGetData(record), sizeof(bool));
/*
* Update the LSN of the last replayed XLOG_FPW_CHANGE record
* so that do_pg_start_backup() and do_pg_stop_backup() can check
* whether full_page_writes has been disabled during online backup.
*/
if (!fpw)
{
SpinLockAcquire(&xlogctl->info_lck);
if (XLByteLT(xlogctl->lastFpwDisableRecPtr, ReadRecPtr))
xlogctl->lastFpwDisableRecPtr = ReadRecPtr;
SpinLockRelease(&xlogctl->info_lck);
}
/* Keep track of full_page_writes */
lastFullPageWrites = fpw;
}
}
void
......@@ -8584,10 +8758,11 @@ xlog_desc(StringInfo buf, uint8 xl_info, char *rec)
CheckPoint *checkpoint = (CheckPoint *) rec;
appendStringInfo(buf, "checkpoint: redo %X/%X; "
"tli %u; xid %u/%u; oid %u; multi %u; offset %u; "
"tli %u; fpw %s; xid %u/%u; oid %u; multi %u; offset %u; "
"oldest xid %u in DB %u; oldest running xid %u; %s",
checkpoint->redo.xlogid, checkpoint->redo.xrecoff,
checkpoint->ThisTimeLineID,
checkpoint->fullPageWrites ? "true" : "false",
checkpoint->nextXidEpoch, checkpoint->nextXid,
checkpoint->nextOid,
checkpoint->nextMulti,
......@@ -8652,6 +8827,13 @@ xlog_desc(StringInfo buf, uint8 xl_info, char *rec)
xlrec.max_locks_per_xact,
wal_level_str);
}
else if (info == XLOG_FPW_CHANGE)
{
bool fpw;
memcpy(&fpw, rec, sizeof(bool));
appendStringInfo(buf, "full_page_writes: %s", fpw ? "true" : "false");
}
else
appendStringInfo(buf, "UNKNOWN");
}
......@@ -8837,6 +9019,7 @@ XLogRecPtr
do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
{
bool exclusive = (labelfile == NULL);
bool backup_started_in_recovery = false;
XLogRecPtr checkpointloc;
XLogRecPtr startpoint;
pg_time_t stamp_time;
......@@ -8848,18 +9031,27 @@ do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
FILE *fp;
StringInfoData labelfbuf;
backup_started_in_recovery = RecoveryInProgress();
if (!superuser() && !is_authenticated_user_replication_role())
ereport(ERROR,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser or replication role to run a backup")));
if (RecoveryInProgress())
/*
* Currently only non-exclusive backup can be taken during recovery.
*/
if (backup_started_in_recovery && exclusive)
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("recovery is in progress"),
errhint("WAL control functions cannot be executed during recovery.")));
if (!XLogIsNeeded())
/*
* During recovery, we don't need to check WAL level. Because, if WAL level
* is not sufficient, it's impossible to get here during recovery.
*/
if (!backup_started_in_recovery && !XLogIsNeeded())
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("WAL level not sufficient for making an online backup"),
......@@ -8885,6 +9077,9 @@ do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
* since we expect that any pages not modified during the backup interval
* must have been correctly captured by the backup.)
*
* Note that forcePageWrites has no effect during an online backup from
* the standby.
*
* We must hold WALInsertLock to change the value of forcePageWrites, to
* ensure adequate interlocking against XLogInsert().
*/
......@@ -8927,17 +9122,32 @@ do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
* Therefore, if a WAL archiver (such as pglesslog) is trying to
* compress out removable backup blocks, it won't remove any that
* occur after this point.
*
* During recovery, we skip forcing XLOG file switch, which means that
* the backup taken during recovery is not available for the special
* recovery case described above.
*/
RequestXLogSwitch();
if (!backup_started_in_recovery)
RequestXLogSwitch();
do
{
bool checkpointfpw;
/*
* Force a CHECKPOINT. Aside from being necessary to prevent torn
* Force a CHECKPOINT. Aside from being necessary to prevent torn
* page problems, this guarantees that two successive backup runs
* will have different checkpoint positions and hence different
* history file names, even if nothing happened in between.
*
* During recovery, establish a restartpoint if possible. We use the last
* restartpoint as the backup starting checkpoint. This means that two
* successive backup runs can have same checkpoint positions.
*
* Since the fact that we are executing do_pg_start_backup() during
* recovery means that checkpointer is running, we can use
* RequestCheckpoint() to establish a restartpoint.
*
* We use CHECKPOINT_IMMEDIATE only if requested by user (via
* passing fast = true). Otherwise this can take awhile.
*/
......@@ -8953,8 +9163,44 @@ do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
LWLockAcquire(ControlFileLock, LW_SHARED);
checkpointloc = ControlFile->checkPoint;
startpoint = ControlFile->checkPointCopy.redo;
checkpointfpw = ControlFile->checkPointCopy.fullPageWrites;
LWLockRelease(ControlFileLock);
if (backup_started_in_recovery)
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
XLogRecPtr recptr;
/*
* Check to see if all WAL replayed during online backup (i.e.,
* since last restartpoint used as backup starting checkpoint)
* contain full-page writes.
*/
SpinLockAcquire(&xlogctl->info_lck);
recptr = xlogctl->lastFpwDisableRecPtr;
SpinLockRelease(&xlogctl->info_lck);
if (!checkpointfpw || XLByteLE(startpoint, recptr))
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("WAL generated with full_page_writes=off was replayed "
"since last restartpoint"),
errhint("This means that the backup being taken on standby "
"is corrupt and should not be used. "
"Enable full_page_writes and run CHECKPOINT on the master, "
"and then try an online backup again.")));
/*
* During recovery, since we don't use the end-of-backup WAL
* record and don't write the backup history file, the starting WAL
* location doesn't need to be unique. This means that two base
* backups started at the same time might use the same checkpoint
* as starting locations.
*/
gotUniqueStartpoint = true;
}
/*
* If two base backups are started at the same time (in WAL sender
* processes), we need to make sure that they use different
......@@ -8994,6 +9240,8 @@ do_pg_start_backup(const char *backupidstr, bool fast, char **labelfile)
checkpointloc.xlogid, checkpointloc.xrecoff);
appendStringInfo(&labelfbuf, "BACKUP METHOD: %s\n",
exclusive ? "pg_start_backup" : "streamed");
appendStringInfo(&labelfbuf, "BACKUP FROM: %s\n",
backup_started_in_recovery ? "standby" : "master");
appendStringInfo(&labelfbuf, "START TIME: %s\n", strfbuf);
appendStringInfo(&labelfbuf, "LABEL: %s\n", backupidstr);
......@@ -9088,6 +9336,7 @@ XLogRecPtr
do_pg_stop_backup(char *labelfile, bool waitforarchive)
{
bool exclusive = (labelfile == NULL);
bool backup_started_in_recovery = false;
XLogRecPtr startpoint;
XLogRecPtr stoppoint;
XLogRecData rdata;
......@@ -9098,6 +9347,7 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive)
char stopxlogfilename[MAXFNAMELEN];
char lastxlogfilename[MAXFNAMELEN];
char histfilename[MAXFNAMELEN];
char backupfrom[20];
uint32 _logId;
uint32 _logSeg;
FILE *lfp;
......@@ -9107,19 +9357,29 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive)
int waits = 0;
bool reported_waiting = false;
char *remaining;
char *ptr;
backup_started_in_recovery = RecoveryInProgress();
if (!superuser() && !is_authenticated_user_replication_role())
ereport(ERROR,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
(errmsg("must be superuser or replication role to run a backup"))));
if (RecoveryInProgress())
/*
* Currently only non-exclusive backup can be taken during recovery.
*/
if (backup_started_in_recovery && exclusive)
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("recovery is in progress"),
errhint("WAL control functions cannot be executed during recovery.")));
if (!XLogIsNeeded())
/*
* During recovery, we don't need to check WAL level. Because, if WAL level
* is not sufficient, it's impossible to get here during recovery.
*/
if (!backup_started_in_recovery && !XLogIsNeeded())
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("WAL level not sufficient for making an online backup"),
......@@ -9209,6 +9469,82 @@ do_pg_stop_backup(char *labelfile, bool waitforarchive)
errmsg("invalid data in file \"%s\"", BACKUP_LABEL_FILE)));
remaining = strchr(labelfile, '\n') + 1; /* %n is not portable enough */
/*
* Parse the BACKUP FROM line. If we are taking an online backup from
* the standby, we confirm that the standby has not been promoted
* during the backup.
*/
ptr = strstr(remaining, "BACKUP FROM:");
if (sscanf(ptr, "BACKUP FROM: %19s\n", backupfrom) != 1)
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("invalid data in file \"%s\"", BACKUP_LABEL_FILE)));
if (strcmp(backupfrom, "standby") == 0 && !backup_started_in_recovery)
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("the standby was promoted during online backup"),
errhint("This means that the backup being taken is corrupt "
"and should not be used. "
"Try taking another online backup.")));
/*
* During recovery, we don't write an end-of-backup record. We assume
* that pg_control was backed up last and its minimum recovery
* point can be available as the backup end location. Since we don't
* have an end-of-backup record, we use the pg_control value to check
* whether we've reached the end of backup when starting recovery from
* this backup. We have no way of checking if pg_control wasn't backed
* up last however.
*
* We don't force a switch to new WAL file and wait for all the required
* files to be archived. This is okay if we use the backup to start
* the standby. But, if it's for an archive recovery, to ensure all the
* required files are available, a user should wait for them to be archived,
* or include them into the backup.
*
* We return the current minimum recovery point as the backup end
* location. Note that it's would be bigger than the exact backup end
* location if the minimum recovery point is updated since the backup
* of pg_control. This is harmless for current uses.
*
* XXX currently a backup history file is for informational and debug
* purposes only. It's not essential for an online backup. Furthermore,
* even if it's created, it will not be archived during recovery because
* an archiver is not invoked. So it doesn't seem worthwhile to write
* a backup history file during recovery.
*/
if (backup_started_in_recovery)
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
XLogRecPtr recptr;
/*
* Check to see if all WAL replayed during online backup contain
* full-page writes.
*/
SpinLockAcquire(&xlogctl->info_lck);
recptr = xlogctl->lastFpwDisableRecPtr;
SpinLockRelease(&xlogctl->info_lck);
if (XLByteLE(startpoint, recptr))
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("WAL generated with full_page_writes=off was replayed "
"during online backup"),
errhint("This means that the backup being taken on standby "
"is corrupt and should not be used. "
"Enable full_page_writes and run CHECKPOINT on the master, "
"and then try an online backup again.")));
LWLockAcquire(ControlFileLock, LW_SHARED);
stoppoint = ControlFile->minRecoveryPoint;
LWLockRelease(ControlFileLock);
return stoppoint;
}
/*
* Write the backup-end xlog record
*/
......@@ -9454,18 +9790,22 @@ GetXLogWriteRecPtr(void)
* Returns TRUE if a backup_label was found (and fills the checkpoint
* location and its REDO location into *checkPointLoc and RedoStartLSN,
* respectively); returns FALSE if not. If this backup_label came from a
* streamed backup, *backupEndRequired is set to TRUE.
* streamed backup, *backupEndRequired is set to TRUE. If this backup_label
* was created during recovery, *backupFromStandby is set to TRUE.
*/
static bool
read_backup_label(XLogRecPtr *checkPointLoc, bool *backupEndRequired)
read_backup_label(XLogRecPtr *checkPointLoc, bool *backupEndRequired,
bool *backupFromStandby)
{
char startxlogfilename[MAXFNAMELEN];
TimeLineID tli;
FILE *lfp;
char ch;
char backuptype[20];
char backupfrom[20];
*backupEndRequired = false;
*backupFromStandby = false;
/*
* See if label file is present
......@@ -9499,16 +9839,22 @@ read_backup_label(XLogRecPtr *checkPointLoc, bool *backupEndRequired)
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("invalid data in file \"%s\"", BACKUP_LABEL_FILE)));
/*
* BACKUP METHOD line is new in 9.1. We can't restore from an older backup
* anyway, but since the information on it is not strictly required, don't
* error out if it's missing for some reason.
* BACKUP METHOD and BACKUP FROM lines are new in 9.2. We can't
* restore from an older backup anyway, but since the information on it
* is not strictly required, don't error out if it's missing for some reason.
*/
if (fscanf(lfp, "BACKUP METHOD: %19s", backuptype) == 1)
if (fscanf(lfp, "BACKUP METHOD: %19s\n", backuptype) == 1)
{
if (strcmp(backuptype, "streamed") == 0)
*backupEndRequired = true;
}
if (fscanf(lfp, "BACKUP FROM: %19s\n", backupfrom) == 1)
{
if (strcmp(backupfrom, "standby") == 0)
*backupFromStandby = true;
}
if (ferror(lfp) || FreeFile(lfp))
ereport(FATAL,
(errcode_for_file_access(),
......
src/backend/postmaster/checkpointer.c
View file @ 8366c780
......@@ -171,6 +171,7 @@ static void CheckArchiveTimeout(void);
static bool IsCheckpointOnSchedule(double progress);
static bool ImmediateCheckpointRequested(void);
static bool CompactCheckpointerRequestQueue(void);
static void UpdateSharedMemoryConfig(void);
/* Signal handlers */
......@@ -351,8 +352,12 @@ CheckpointerMain(void)
if (RecoveryInProgress())
ThisTimeLineID = GetRecoveryTargetTLI();
/* Do this once before starting the loop, then just at SIGHUP time. */
SyncRepUpdateSyncStandbysDefined();
/*
* Ensure all shared memory values are set correctly for the config.
* Doing this here ensures no race conditions from other concurrent
* updaters.
*/
UpdateSharedMemoryConfig();
/*
* Loop forever
......@@ -380,8 +385,19 @@ CheckpointerMain(void)
{
got_SIGHUP = false;
ProcessConfigFile(PGC_SIGHUP);
/* update global shmem state for sync rep */
SyncRepUpdateSyncStandbysDefined();
/*
* Checkpointer is the last process to shutdown, so we ask
* it to hold the keys for a range of other tasks required
* most of which have nothing to do with checkpointing at all.
*
* For various reasons, some config values can change
* dynamically so are the primary copy of them is held in
* shared memory to make sure all backends see the same value.
* We make Checkpointer responsible for updating the shared
* memory copy if the parameter setting changes because of SIGHUP.
*/
UpdateSharedMemoryConfig();
}
if (checkpoint_requested)
{
......@@ -1239,3 +1255,21 @@ AbsorbFsyncRequests(void)
END_CRIT_SECTION();
}
/*
* Update any shared memory configurations based on config parameters
*/
static void
UpdateSharedMemoryConfig(void)
{
/* update global shmem state for sync rep */
SyncRepUpdateSyncStandbysDefined();
/*
* If full_page_writes has been changed by SIGHUP, we update it
* in shared memory and write an XLOG_FPW_CHANGE record.
*/
UpdateFullPageWrites();
elog(DEBUG2, "checkpointer updated shared memory configuration values");
}
src/backend/postmaster/postmaster.c
View file @ 8366c780
......@@ -3067,8 +3067,8 @@ PostmasterStateMachine(void)
else
{
/*
* Terminate backup mode to avoid recovery after a clean fast
* shutdown. Since a backup can only be taken during normal
* Terminate exclusive backup mode to avoid recovery after a clean fast
* shutdown. Since an exclusive backup can only be taken during normal
* running (and not, for example, while running under Hot Standby)
* it only makes sense to do this if we reached normal running. If
* we're still in recovery, the backup file is one we're
......
src/backend/replication/basebackup.c
View file @ 8366c780
......@@ -180,6 +180,22 @@ perform_base_backup(basebackup_options *opt, DIR *tblspcdir)
ti->path == NULL ? 1 : strlen(ti->path),
false);
/* In the main tar, include pg_control last. */
if (ti->path == NULL)
{
struct stat statbuf;
if (lstat(XLOG_CONTROL_FILE, &statbuf) != 0)
{
ereport(ERROR,
(errcode_for_file_access(),
errmsg("could not stat control file \"%s\": %m",
XLOG_CONTROL_FILE)));
}
sendFile(XLOG_CONTROL_FILE, XLOG_CONTROL_FILE, &statbuf);
}
/*
* If we're including WAL, and this is the main data directory we
* don't terminate the tar stream here. Instead, we will append
......@@ -361,11 +377,6 @@ SendBaseBackup(BaseBackupCmd *cmd)
MemoryContext old_context;
basebackup_options opt;
if (am_cascading_walsender)
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg("recovery is still in progress, can't accept WAL streaming connections for backup")));
parse_basebackup_options(cmd->options, &opt);
backup_context = AllocSetContextCreate(CurrentMemoryContext,
......@@ -609,6 +620,10 @@ sendDir(char *path, int basepathlen, bool sizeonly)
strcmp(pathbuf, "./postmaster.opts") == 0)
continue;
/* Skip pg_control here to back up it last */
if (strcmp(pathbuf, "./global/pg_control") == 0)
continue;
if (lstat(pathbuf, &statbuf) != 0)
{
if (errno != ENOENT)
......
src/backend/utils/misc/guc.c
View file @ 8366c780
......@@ -130,7 +130,6 @@ extern int CommitSiblings;
extern char *default_tablespace;
extern char *temp_tablespaces;
extern bool synchronize_seqscans;
extern bool fullPageWrites;
extern int ssl_renegotiation_limit;
extern char *SSLCipherSuites;
......
src/bin/pg_controldata/pg_controldata.c
View file @ 8366c780
......@@ -209,6 +209,8 @@ main(int argc, char *argv[])
ControlFile.checkPointCopy.redo.xrecoff);
printf(_("Latest checkpoint's TimeLineID: %u\n"),
ControlFile.checkPointCopy.ThisTimeLineID);
printf(_("Latest checkpoint's full_page_writes: %s\n"),
ControlFile.checkPointCopy.fullPageWrites ? _("on") : _("off"));
printf(_("Latest checkpoint's NextXID: %u/%u\n"),
ControlFile.checkPointCopy.nextXidEpoch,
ControlFile.checkPointCopy.nextXid);
......@@ -232,6 +234,9 @@ main(int argc, char *argv[])
printf(_("Backup start location: %X/%X\n"),
ControlFile.backupStartPoint.xlogid,
ControlFile.backupStartPoint.xrecoff);
printf(_("Backup end location: %X/%X\n"),
ControlFile.backupEndPoint.xlogid,
ControlFile.backupEndPoint.xrecoff);
printf(_("End-of-backup record required: %s\n"),
ControlFile.backupEndRequired ? _("yes") : _("no"));
printf(_("Current wal_level setting: %s\n"),
......
src/bin/pg_resetxlog/pg_resetxlog.c
View file @ 8366c780
......@@ -489,6 +489,7 @@ GuessControlValues(void)
ControlFile.checkPointCopy.redo.xlogid = 0;
ControlFile.checkPointCopy.redo.xrecoff = SizeOfXLogLongPHD;
ControlFile.checkPointCopy.ThisTimeLineID = 1;
ControlFile.checkPointCopy.fullPageWrites = false;
ControlFile.checkPointCopy.nextXidEpoch = 0;
ControlFile.checkPointCopy.nextXid = FirstNormalTransactionId;
ControlFile.checkPointCopy.nextOid = FirstBootstrapObjectId;
......@@ -503,7 +504,7 @@ GuessControlValues(void)
ControlFile.time = (pg_time_t) time(NULL);
ControlFile.checkPoint = ControlFile.checkPointCopy.redo;
/* minRecoveryPoint and backupStartPoint can be left zero */
/* minRecoveryPoint, backupStartPoint and backupEndPoint can be left zero */
ControlFile.wal_level = WAL_LEVEL_MINIMAL;
ControlFile.MaxConnections = 100;
......@@ -569,6 +570,8 @@ PrintControlValues(bool guessed)
sysident_str);
printf(_("Latest checkpoint's TimeLineID: %u\n"),
ControlFile.checkPointCopy.ThisTimeLineID);
printf(_("Latest checkpoint's full_page_writes: %s\n"),
ControlFile.checkPointCopy.fullPageWrites ? _("on") : _("off"));
printf(_("Latest checkpoint's NextXID: %u/%u\n"),
ControlFile.checkPointCopy.nextXidEpoch,
ControlFile.checkPointCopy.nextXid);
......@@ -637,6 +640,8 @@ RewriteControlFile(void)
ControlFile.minRecoveryPoint.xrecoff = 0;
ControlFile.backupStartPoint.xlogid = 0;
ControlFile.backupStartPoint.xrecoff = 0;
ControlFile.backupEndPoint.xlogid = 0;
ControlFile.backupEndPoint.xrecoff = 0;
ControlFile.backupEndRequired = false;
/*
......
src/include/access/xlog.h
View file @ 8366c780
......@@ -192,6 +192,7 @@ extern int XLogArchiveTimeout;
extern bool XLogArchiveMode;
extern char *XLogArchiveCommand;
extern bool EnableHotStandby;
extern bool fullPageWrites;
extern bool log_checkpoints;
/* WAL levels */
......@@ -307,6 +308,7 @@ extern void CreateCheckPoint(int flags);
extern bool CreateRestartPoint(int flags);
extern void XLogPutNextOid(Oid nextOid);
extern XLogRecPtr XLogRestorePoint(const char *rpName);
extern void UpdateFullPageWrites(void);
extern XLogRecPtr GetRedoRecPtr(void);
extern XLogRecPtr GetInsertRecPtr(void);
extern XLogRecPtr GetFlushRecPtr(void);
......
src/include/access/xlog_internal.h
View file @ 8366c780
......@@ -71,7 +71,7 @@ typedef struct XLogContRecord
/*
* Each page of XLOG file has a header like this:
*/
#define XLOG_PAGE_MAGIC 0xD069 /* can be used as WAL version indicator */
#define XLOG_PAGE_MAGIC 0xD070 /* can be used as WAL version indicator */
typedef struct XLogPageHeaderData
{
......
src/include/catalog/pg_control.h
View file @ 8366c780
......@@ -21,7 +21,7 @@
/* Version identifier for this pg_control format */
#define PG_CONTROL_VERSION 921
#define PG_CONTROL_VERSION 922
/*
* Body of CheckPoint XLOG records. This is declared here because we keep
......@@ -33,6 +33,7 @@ typedef struct CheckPoint
XLogRecPtr redo; /* next RecPtr available when we began to
* create CheckPoint (i.e. REDO start point) */
TimeLineID ThisTimeLineID; /* current TLI */
bool fullPageWrites; /* current full_page_writes */
uint32 nextXidEpoch; /* higher-order bits of nextXid */
TransactionId nextXid; /* next free XID */
Oid nextOid; /* next free OID */
......@@ -60,6 +61,7 @@ typedef struct CheckPoint
#define XLOG_BACKUP_END 0x50
#define XLOG_PARAMETER_CHANGE 0x60
#define XLOG_RESTORE_POINT 0x70
#define XLOG_FPW_CHANGE 0x80
/*
......@@ -138,6 +140,12 @@ typedef struct ControlFileData
* record, to make sure the end-of-backup record corresponds the base
* backup we're recovering from.
*
* backupEndPoint is the backup end location, if we are recovering from
* an online backup which was taken from the standby and haven't reached
* the end of backup yet. It is initialized to the minimum recovery point
* in pg_control which was backed up last. It is reset to zero when
* the end of backup is reached, and we mustn't start up before that.
*
* If backupEndRequired is true, we know for sure that we're restoring
* from a backup, and must see a backup-end record before we can safely
* start up. If it's false, but backupStartPoint is set, a backup_label
......@@ -146,6 +154,7 @@ typedef struct ControlFileData
*/
XLogRecPtr minRecoveryPoint;
XLogRecPtr backupStartPoint;
XLogRecPtr backupEndPoint;
bool backupEndRequired;
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment