Skip to content

P
Postgres FD Implementation
Commit 704ddaaa authored by Tom Lane's avatar Tom Lane
Browse files
Options

Add support for forcing a switch to a new xlog file; cause such a switch 

to happen automatically during pg_stop_backup().  Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends.  Simon Riggs with some editorialization by Tom Lane.
parent c0dc166a
Hide whitespace changes
Inline Side-by-side
Showing with 516 additions and 67 deletions
doc/src/sgml/backup.sgml
View file @ 704ddaaa
<!-- $PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.81 2006/06/18 15:38:35 petere Exp $ -->
<!-- $PostgreSQL: pgsql/doc/src/sgml/backup.sgml,v 2.82 2006/08/06 03:53:43 tgl Exp $ -->
<chapter id="backup">
<title>Backup and Restore</title>
......@@ -597,6 +597,15 @@ archive_command = 'test ! -f .../%f &amp;&amp; cp %p .../%f'
failure, it will be called only once for any given file name.
</para>
<para>
Another way to limit your exposure to data loss is to call
<function>pg_switch_xlog()</> periodically, such as once a minute.
This function forces the current WAL segment file to be completed
and made available to the archiving command. This approach does
not work well for extremely short update intervals, however, since
copying a new 16MB segment file every few seconds is expensive.
</para>
<para>
In writing your archive command, you should assume that the file names to
be archived may be up to 64 characters long and may contain any
......@@ -670,7 +679,9 @@ SELECT pg_stop_backup();
<listitem>
<para>
Once the WAL segment files used during the backup are archived as part
of normal database activity, you are done.
of normal database activity, you are done. The file identified by
<function>pg_stop_backup</>'s result is the last segment that needs
to be archived to complete the backup.
</para>
</listitem>
</orderedlist>
......@@ -739,10 +750,7 @@ SELECT pg_stop_backup();
segments with names numerically less are no longer needed to recover
the file system backup and may be deleted. However, you should
consider keeping several backup sets to be absolutely certain that
you can recover your data. Keep in mind that only completed WAL
segment files are archived, so there will be delay between running
<function>pg_stop_backup</> and the archiving of all WAL segment
files needed to make the file system backup consistent.
you can recover your data.
</para>
<para>
......
doc/src/sgml/func.sgml
View file @ 704ddaaa
<!-- $PostgreSQL: pgsql/doc/src/sgml/func.sgml,v 1.328 2006/07/28 18:33:03 tgl Exp $ -->
<!-- $PostgreSQL: pgsql/doc/src/sgml/func.sgml,v 1.329 2006/08/06 03:53:43 tgl Exp $ -->
<chapter id="functions">
<title>Functions and Operators</title>
......@@ -10142,6 +10142,18 @@ SELECT set_config('log_statement_stats', 'off', false);
<indexterm zone="functions-admin">
<primary>pg_stop_backup</primary>
</indexterm>
<indexterm zone="functions-admin">
<primary>pg_switch_xlog</primary>
</indexterm>
<indexterm zone="functions-admin">
<primary>pg_current_xlog_location</primary>
</indexterm>
<indexterm zone="functions-admin">
<primary>pg_xlogfile_name_offset</primary>
</indexterm>
<indexterm zone="functions-admin">
<primary>pg_xlogfile_name</primary>
</indexterm>
<indexterm zone="functions-admin">
<primary>backup</primary>
</indexterm>
......@@ -10149,7 +10161,7 @@ SELECT set_config('log_statement_stats', 'off', false);
<para>
The functions shown in <xref
linkend="functions-admin-backup-table"> assist in making on-line backups.
Use of these functions is restricted to superusers.
Use of the first three functions is restricted to superusers.
</para>
<table id="functions-admin-backup-table">
......@@ -10175,6 +10187,34 @@ SELECT set_config('log_statement_stats', 'off', false);
<entry><type>text</type></entry>
<entry>Finish performing on-line backup</entry>
</row>
<row>
<entry>
<literal><function>pg_switch_xlog</function>()</literal>
</entry>
<entry><type>text</type></entry>
<entry>Force switch to a new xlog file</entry>
</row>
<row>
<entry>
<literal><function>pg_current_xlog_location</function>()</literal>
</entry>
<entry><type>text</type></entry>
<entry>Get current xlog location</entry>
</row>
<row>
<entry>
<literal><function>pg_xlogfile_name_offset</function>(<parameter>location</> <type>text</>)</literal>
</entry>
<entry><type>text</type></entry>
<entry>Convert xlog location string to filename and decimal byte offset within file</entry>
</row>
<row>
<entry>
<literal><function>pg_xlogfile_name</function>(<parameter>location</> <type>text</>)</literal>
</entry>
<entry><type>text</type></entry>
<entry>Convert xlog location string to filename</entry>
</row>
</tbody>
</tgroup>
</table>
......@@ -10184,19 +10224,62 @@ SELECT set_config('log_statement_stats', 'off', false);
arbitrary user-defined label for the backup. (Typically this would be
the name under which the backup dump file will be stored.) The function
writes a backup label file into the database cluster's data directory,
and then returns the backup's starting WAL offset as text. (The user
and then returns the backup's starting xlog location as text. The user
need not pay any attention to this result value, but it is provided in
case it is of use.)
case it is of use.
<programlisting>
postgres=# select pg_start_backup('label_goes_here');
pg_start_backup
-----------------
0/D4445B8
(1 row)
</programlisting>
</para>
<para>
<function>pg_stop_backup</> removes the label file created by
<function>pg_start_backup</>, and instead creates a backup history file in
the WAL archive area. The history file includes the label given to
<function>pg_start_backup</>, the starting and ending WAL offsets for
the xlog archive area. The history file includes the label given to
<function>pg_start_backup</>, the starting and ending xlog locations for
the backup, and the starting and ending times of the backup. The return
value is the backup's ending WAL offset (which again may be of little
interest).
value is the backup's ending xlog location (which again may be of little
interest). After noting the ending location, the current xlog insertion
point is automatically advanced to the next xlog file, so that the
ending xlog file can be archived immediately to complete the backup.
</para>
<para>
<function>pg_switch_xlog</> moves to the next xlog file, allowing the
current file to be archived (assuming you are using continuous archiving).
The result is the ending xlog location within the just-completed xlog file.
If there has been no xlog activity since the last xlog switch,
<function>pg_switch_xlog</> does nothing and returns the end location
of the previous xlog file.
</para>
<para>
<function>pg_current_xlog_location</> displays the current xlog insertion
point in the same format used by the above functions. This is a
read-only operation and does not require superuser permissions.
</para>
<para>
You can use <function>pg_xlogfile_name_offset</> to extract the
corresponding xlog filename and byte offset from the results of any of the
above functions. For example:
<programlisting>
postgres=# select pg_xlogfile_name_offset(pg_stop_backup());
pg_xlogfile_name_offset
----------------------------------
00000001000000000000000D 4039624
(1 row)
</programlisting>
Similarly, <function>pg_xlogfile_name</> extracts just the xlog filename.
When the given xlog location is exactly at an xlog file boundary, both
these functions return the name of the preceding xlog file.
This is usually the desired behavior for managing xlog archiving
behavior, since the preceding file is the last one that currently
needs to be archived.
</para>
<para>
......
src/backend/access/transam/xlog.c
View file @ 704ddaaa
......@@ -7,7 +7,7 @@
* Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $PostgreSQL: pgsql/src/backend/access/transam/xlog.c,v 1.245 2006/07/30 02:07:18 alvherre Exp $
* $PostgreSQL: pgsql/src/backend/access/transam/xlog.c,v 1.246 2006/08/06 03:53:44 tgl Exp $
*
*-------------------------------------------------------------------------
*/
......@@ -312,7 +312,8 @@ static XLogRecPtr RedoRecPtr;
* CheckpointLock: must be held to do a checkpoint (ensures only one
* checkpointer at a time; even though the postmaster won't launch
* parallel checkpoint processes, we need this because manual checkpoints
* could be launched simultaneously).
* could be launched simultaneously). XXX now that all checkpoints are
* done by the bgwriter, isn't this lock redundant?
*
*----------
*/
......@@ -465,8 +466,8 @@ static bool recoveryStopsHere(XLogRecord *record, bool *includeThis);
static bool XLogCheckBuffer(XLogRecData *rdata, bool doPageWrites,
XLogRecPtr *lsn, BkpBlock *bkpb);
static bool AdvanceXLInsertBuffer(void);
static void XLogWrite(XLogwrtRqst WriteRqst, bool flexible);
static bool AdvanceXLInsertBuffer(bool new_segment);
static void XLogWrite(XLogwrtRqst WriteRqst, bool flexible, bool xlog_switch);
static int XLogFileInit(uint32 log, uint32 seg,
bool *use_existent, bool use_lock);
static bool InstallXLogFileSegment(uint32 *log, uint32 *seg, char *tmppath,
......@@ -543,7 +544,8 @@ XLogInsert(RmgrId rmid, uint8 info, XLogRecData *rdata)
XLogwrtRqst LogwrtRqst;
bool updrqst;
bool doPageWrites;
bool no_tran = (rmid == RM_XLOG_ID) ? true : false;
bool isLogSwitch = (rmid == RM_XLOG_ID && info == XLOG_SWITCH);
bool no_tran = (rmid == RM_XLOG_ID);
if (info & XLR_INFO_MASK)
{
......@@ -687,14 +689,13 @@ begin:;
}
/*
* NOTE: the test for len == 0 here is somewhat fishy, since in theory all
* of the rmgr data might have been suppressed in favor of backup blocks.
* Currently, all callers of XLogInsert provide at least some
* not-in-a-buffer data and so len == 0 should never happen, but that may
* not be true forever. If you need to remove the len == 0 check, also
* remove the check for xl_len == 0 in ReadRecord, below.
* NOTE: We disallow len == 0 because it provides a useful bit of extra
* error checking in ReadRecord. This means that all callers of
* XLogInsert must supply at least some not-in-a-buffer data. However,
* we make an exception for XLOG SWITCH records because we don't want
* them to ever cross a segment boundary.
*/
if (len == 0)
if (len == 0 && !isLogSwitch)
elog(PANIC, "invalid xlog record length %u", len);
START_CRIT_SECTION();
......@@ -731,7 +732,7 @@ begin:;
*/
LogwrtResult = XLogCtl->Write.LogwrtResult;
if (XLByteLT(LogwrtResult.Write, LogwrtRqst.Write))
XLogWrite(LogwrtRqst, true);
XLogWrite(LogwrtRqst, true, false);
LWLockRelease(WALWriteLock);
}
}
......@@ -854,15 +855,55 @@ begin:;
freespace = INSERT_FREESPACE(Insert);
if (freespace < SizeOfXLogRecord)
{
updrqst = AdvanceXLInsertBuffer();
updrqst = AdvanceXLInsertBuffer(false);
freespace = INSERT_FREESPACE(Insert);
}
/* Compute record's XLOG location */
curridx = Insert->curridx;
record = (XLogRecord *) Insert->currpos;
INSERT_RECPTR(RecPtr, Insert, curridx);
/*
* If the record is an XLOG_SWITCH, and we are exactly at the start
* of a segment, we need not insert it (and don't want to because
* we'd like consecutive switch requests to be no-ops). Instead,
* make sure everything is written and flushed through the end of
* the prior segment, and return the prior segment's end address.
*/
if (isLogSwitch &&
(RecPtr.xrecoff % XLogSegSize) == SizeOfXLogLongPHD)
{
/* We can release insert lock immediately */
LWLockRelease(WALInsertLock);
RecPtr.xrecoff -= SizeOfXLogLongPHD;
if (RecPtr.xrecoff == 0)
{
/* crossing a logid boundary */
RecPtr.xlogid -= 1;
RecPtr.xrecoff = XLogFileSize;
}
LWLockAcquire(WALWriteLock, LW_EXCLUSIVE);
LogwrtResult = XLogCtl->Write.LogwrtResult;
if (!XLByteLE(RecPtr, LogwrtResult.Flush))
{
XLogwrtRqst FlushRqst;
FlushRqst.Write = RecPtr;
FlushRqst.Flush = RecPtr;
XLogWrite(FlushRqst, false, false);
}
LWLockRelease(WALWriteLock);
END_CRIT_SECTION();
return RecPtr;
}
/* Insert record header */
record = (XLogRecord *) Insert->currpos;
record->xl_prev = Insert->PrevRecord;
record->xl_xid = GetCurrentTransactionIdIfAny();
record->xl_tot_len = SizeOfXLogRecord + write_len;
......@@ -876,17 +917,14 @@ begin:;
FIN_CRC32(rdata_crc);
record->xl_crc = rdata_crc;
/* Compute record's XLOG location */
INSERT_RECPTR(RecPtr, Insert, curridx);
#ifdef WAL_DEBUG
if (XLOG_DEBUG)
{
StringInfoData buf;
initStringInfo(&buf);
appendStringInfo(&buf, "INSERT @ %X/%X: ",
RecPtr.xlogid, RecPtr.xrecoff);
appendStringInfo(&buf, "INSERT @ %X/%X: ",
RecPtr.xlogid, RecPtr.xrecoff);
xlog_outrec(&buf, record);
if (rdata->data != NULL)
{
......@@ -937,7 +975,7 @@ begin:;
}
/* Use next buffer */
updrqst = AdvanceXLInsertBuffer();
updrqst = AdvanceXLInsertBuffer(false);
curridx = Insert->curridx;
/* Insert cont-record header */
Insert->currpage->xlp_info |= XLP_FIRST_IS_CONTRECORD;
......@@ -958,13 +996,92 @@ begin:;
*/
INSERT_RECPTR(RecPtr, Insert, curridx);
/* Need to update shared LogwrtRqst if some block was filled up */
if (freespace < SizeOfXLogRecord)
updrqst = true; /* curridx is filled and available for writing
* out */
/*
* If the record is an XLOG_SWITCH, we must now write and flush all the
* existing data, and then forcibly advance to the start of the next
* segment. It's not good to do this I/O while holding the insert lock,
* but there seems too much risk of confusion if we try to release the
* lock sooner. Fortunately xlog switch needn't be a high-performance
* operation anyway...
*/
if (isLogSwitch)
{
XLogCtlWrite *Write = &XLogCtl->Write;
XLogwrtRqst FlushRqst;
XLogRecPtr OldSegEnd;
LWLockAcquire(WALWriteLock, LW_EXCLUSIVE);
/*
* Flush through the end of the page containing XLOG_SWITCH,
* and perform end-of-segment actions (eg, notifying archiver).
*/
WriteRqst = XLogCtl->xlblocks[curridx];
FlushRqst.Write = WriteRqst;
FlushRqst.Flush = WriteRqst;
XLogWrite(FlushRqst, false, true);
/* Set up the next buffer as first page of next segment */
/* Note: AdvanceXLInsertBuffer cannot need to do I/O here */
(void) AdvanceXLInsertBuffer(true);
/* There should be no unwritten data */
curridx = Insert->curridx;
Assert(curridx == Write->curridx);
/* Compute end address of old segment */
OldSegEnd = XLogCtl->xlblocks[curridx];
OldSegEnd.xrecoff -= XLOG_BLCKSZ;
if (OldSegEnd.xrecoff == 0)
{
/* crossing a logid boundary */
OldSegEnd.xlogid -= 1;
OldSegEnd.xrecoff = XLogFileSize;
}
/* Make it look like we've written and synced all of old segment */
LogwrtResult.Write = OldSegEnd;
LogwrtResult.Flush = OldSegEnd;
/*
* Update shared-memory status --- this code should match XLogWrite
*/
{
/* use volatile pointer to prevent code rearrangement */
volatile XLogCtlData *xlogctl = XLogCtl;
SpinLockAcquire(&xlogctl->info_lck);
xlogctl->LogwrtResult = LogwrtResult;
if (XLByteLT(xlogctl->LogwrtRqst.Write, LogwrtResult.Write))
xlogctl->LogwrtRqst.Write = LogwrtResult.Write;
if (XLByteLT(xlogctl->LogwrtRqst.Flush, LogwrtResult.Flush))
xlogctl->LogwrtRqst.Flush = LogwrtResult.Flush;
SpinLockRelease(&xlogctl->info_lck);
}
Write->LogwrtResult = LogwrtResult;
LWLockRelease(WALWriteLock);
updrqst = false; /* done already */
}
else
curridx = PrevBufIdx(curridx);
WriteRqst = XLogCtl->xlblocks[curridx];
{
/* normal case, ie not xlog switch */
/* Need to update shared LogwrtRqst if some block was filled up */
if (freespace < SizeOfXLogRecord)
{
/* curridx is filled and available for writing out */
updrqst = true;
}
else
{
/* if updrqst already set, write through end of previous buf */
curridx = PrevBufIdx(curridx);
}
WriteRqst = XLogCtl->xlblocks[curridx];
}
LWLockRelease(WALInsertLock);
......@@ -1173,6 +1290,10 @@ XLogArchiveCleanup(const char *xlog)
* Advance the Insert state to the next buffer page, writing out the next
* buffer if it still contains unwritten data.
*
* If new_segment is TRUE then we set up the next buffer page as the first
* page of the next xlog segment file, possibly but not usually the next
* consecutive file page.
*
* The global LogwrtRqst.Write pointer needs to be advanced to include the
* just-filled page. If we can do this for free (without an extra lock),
* we do so here. Otherwise the caller must do it. We return TRUE if the
......@@ -1181,7 +1302,7 @@ XLogArchiveCleanup(const char *xlog)
* Must be called with WALInsertLock held.
*/
static bool
AdvanceXLInsertBuffer(void)
AdvanceXLInsertBuffer(bool new_segment)
{
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogCtlWrite *Write = &XLogCtl->Write;
......@@ -1248,7 +1369,7 @@ AdvanceXLInsertBuffer(void)
WriteRqst.Write = OldPageRqstPtr;
WriteRqst.Flush.xlogid = 0;
WriteRqst.Flush.xrecoff = 0;
XLogWrite(WriteRqst, false);
XLogWrite(WriteRqst, false, false);
LWLockRelease(WALWriteLock);
Insert->LogwrtResult = LogwrtResult;
}
......@@ -1260,6 +1381,14 @@ AdvanceXLInsertBuffer(void)
* output page.
*/
NewPageEndPtr = XLogCtl->xlblocks[Insert->curridx];
if (new_segment)
{
/* force it to a segment start point */
NewPageEndPtr.xrecoff += XLogSegSize - 1;
NewPageEndPtr.xrecoff -= NewPageEndPtr.xrecoff % XLogSegSize;
}
if (NewPageEndPtr.xrecoff >= XLogFileSize)
{
/* crossing a logid boundary */
......@@ -1318,13 +1447,20 @@ AdvanceXLInsertBuffer(void)
* This option allows us to avoid uselessly issuing multiple writes when a
* single one would do.
*
* If xlog_switch == TRUE, we are intending an xlog segment switch, so
* perform end-of-segment actions after writing the last page, even if
* it's not physically the end of its segment. (NB: this will work properly
* only if caller specifies WriteRqst == page-end and flexible == false,
* and there is some data to write.)
*
* Must be called with WALWriteLock held.
*/
static void
XLogWrite(XLogwrtRqst WriteRqst, bool flexible)
XLogWrite(XLogwrtRqst WriteRqst, bool flexible, bool xlog_switch)
{
XLogCtlWrite *Write = &XLogCtl->Write;
bool ispartialpage;
bool last_iteration;
bool finishing_seg;
bool use_existent;
int curridx;
......@@ -1468,10 +1604,12 @@ XLogWrite(XLogwrtRqst WriteRqst, bool flexible)
* contiguous in memory), or if we are at the end of the logfile
* segment.
*/
last_iteration = !XLByteLT(LogwrtResult.Write, WriteRqst.Write);
finishing_seg = !ispartialpage &&
(startoffset + npages * XLOG_BLCKSZ) >= XLogSegSize;
if (!XLByteLT(LogwrtResult.Write, WriteRqst.Write) ||
if (last_iteration ||
curridx == XLogCtl->XLogCacheBlck ||
finishing_seg)
{
......@@ -1519,10 +1657,13 @@ XLogWrite(XLogwrtRqst WriteRqst, bool flexible)
* later. Doing it here ensures that one and only one backend will
* perform this fsync.
*
* We also do this if this is the last page written for an xlog
* switch.
*
* This is also the right place to notify the Archiver that the
* segment is ready to copy to archival storage.
*/
if (finishing_seg)
if (finishing_seg || (xlog_switch && last_iteration))
{
issue_xlog_fsync();
LogwrtResult.Flush = LogwrtResult.Write; /* end of page */
......@@ -1681,7 +1822,7 @@ XLogFlush(XLogRecPtr record)
WriteRqst.Write = WriteRqstPtr;
WriteRqst.Flush = record;
}
XLogWrite(WriteRqst, false);
XLogWrite(WriteRqst, false, false);
}
LWLockRelease(WALWriteLock);
}
......@@ -2828,10 +2969,20 @@ ReadRecord(XLogRecPtr *RecPtr, int emode)
got_record:;
/*
* Currently, xl_len == 0 must be bad data, but that might not be true
* forever. See note in XLogInsert.
* xl_len == 0 is bad data for everything except XLOG SWITCH, where
* it is required.
*/
if (record->xl_len == 0)
if (record->xl_rmid == RM_XLOG_ID && record->xl_info == XLOG_SWITCH)
{
if (record->xl_len != 0)
{
ereport(emode,
(errmsg("invalid xlog switch record at %X/%X",
RecPtr->xlogid, RecPtr->xrecoff)));
goto next_record_is_invalid;
}
}
else if (record->xl_len == 0)
{
ereport(emode,
(errmsg("record with zero length at %X/%X",
......@@ -2994,6 +3145,7 @@ got_record:;
pageHeaderSize +
MAXALIGN(SizeOfXLogContRecord + contrecord->xl_rem_len);
ReadRecPtr = *RecPtr;
/* needn't worry about XLOG SWITCH, it can't cross page boundaries */
return record;
}
......@@ -3007,6 +3159,22 @@ got_record:;
EndRecPtr.xrecoff = RecPtr->xrecoff + MAXALIGN(total_len);
ReadRecPtr = *RecPtr;
memcpy(buffer, record, total_len);
/*
* Special processing if it's an XLOG SWITCH record
*/
if (record->xl_rmid == RM_XLOG_ID && record->xl_info == XLOG_SWITCH)
{
/* Pretend it extends to end of segment */
EndRecPtr.xrecoff += XLogSegSize - 1;
EndRecPtr.xrecoff -= EndRecPtr.xrecoff % XLogSegSize;
nextRecord = NULL; /* definitely not on same page */
/*
* Pretend that readBuf contains the last page of the segment.
* This is just to avoid Assert failure in StartupXLOG if XLOG
* ends with this segment.
*/
readOff = XLogSegSize - XLOG_BLCKSZ;
}
return (XLogRecord *) buffer;
next_record_is_invalid:;
......@@ -5262,7 +5430,7 @@ CreateCheckPoint(bool shutdown, bool force)
freespace = INSERT_FREESPACE(Insert);
if (freespace < SizeOfXLogRecord)
{
(void) AdvanceXLInsertBuffer();
(void) AdvanceXLInsertBuffer(false);
/* OK to ignore update return flag, since we will do flush anyway */
freespace = INSERT_FREESPACE(Insert);
}
......@@ -5447,6 +5615,33 @@ XLogPutNextOid(Oid nextOid)
*/
}
/*
* Write an XLOG SWITCH record.
*
* Here we just blindly issue an XLogInsert request for the record.
* All the magic happens inside XLogInsert.
*
* The return value is either the end+1 address of the switch record,
* or the end+1 address of the prior segment if we did not need to
* write a switch record because we are already at segment start.
*/
static XLogRecPtr
RequestXLogSwitch(void)
{
XLogRecPtr RecPtr;
XLogRecData rdata;
/* XLOG SWITCH, alone among xlog record types, has no data */
rdata.buffer = InvalidBuffer;
rdata.data = NULL;
rdata.len = 0;
rdata.next = NULL;
RecPtr = XLogInsert(RM_XLOG_ID, XLOG_SWITCH, &rdata);
return RecPtr;
}
/*
* XLOG resource manager's routines
*/
......@@ -5515,6 +5710,10 @@ xlog_redo(XLogRecPtr lsn, XLogRecord *record)
(errmsg("unexpected timeline ID %u (should be %u) in checkpoint record",
checkPoint.ThisTimeLineID, ThisTimeLineID)));
}
else if (info == XLOG_SWITCH)
{
/* nothing to do here */
}
}
void
......@@ -5544,6 +5743,10 @@ xlog_desc(StringInfo buf, uint8 xl_info, char *rec)
memcpy(&nextOid, rec, sizeof(Oid));
appendStringInfo(buf, "nextOid: %u", nextOid);
}
else if (info == XLOG_SWITCH)
{
appendStringInfo(buf, "xlog switch");
}
else
appendStringInfo(buf, "UNKNOWN");
}
......@@ -5694,7 +5897,7 @@ issue_xlog_fsync(void)
* where it will be archived as part of the backup dump. The label file
* contains the user-supplied label string (typically this would be used
* to tell where the backup dump will be stored) and the starting time and
* starting WAL offset for the dump.
* starting WAL location for the dump.
*/
Datum
pg_start_backup(PG_FUNCTION_ARGS)
......@@ -5844,7 +6047,7 @@ pg_start_backup(PG_FUNCTION_ARGS)
PG_END_TRY();
/*
* We're done. As a convenience, return the starting WAL offset.
* We're done. As a convenience, return the starting WAL location.
*/
snprintf(xlogfilename, sizeof(xlogfilename), "%X/%X",
startpoint.xlogid, startpoint.xrecoff);
......@@ -5859,13 +6062,12 @@ pg_start_backup(PG_FUNCTION_ARGS)
* We remove the backup label file created by pg_start_backup, and instead
* create a backup history file in pg_xlog (whence it will immediately be
* archived). The backup history file contains the same info found in
* the label file, plus the backup-end time and WAL offset.
* the label file, plus the backup-end time and WAL location.
*/
Datum
pg_stop_backup(PG_FUNCTION_ARGS)
{
text *result;
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogRecPtr startpoint;
XLogRecPtr stoppoint;
time_t stamp_time;
......@@ -5886,15 +6088,20 @@ pg_stop_backup(PG_FUNCTION_ARGS)
(errmsg("must be superuser to run a backup"))));
/*
* Get the current end-of-WAL position; it will be unsafe to use this dump
* to restore to a point in advance of this time. We can also clear
* forcePageWrites here.
* OK to clear forcePageWrites
*/
LWLockAcquire(WALInsertLock, LW_EXCLUSIVE);
INSERT_RECPTR(stoppoint, Insert, Insert->curridx);
XLogCtl->Insert.forcePageWrites = false;
LWLockRelease(WALInsertLock);
/*
* Force a switch to a new xlog segment file, so that the backup
* is valid as soon as archiver moves out the current segment file.
* We'll report the end address of the XLOG SWITCH record as the backup
* stopping point.
*/
stoppoint = RequestXLogSwitch();
XLByteToSeg(stoppoint, _logId, _logSeg);
XLogFileName(stopxlogfilename, ThisTimeLineID, _logId, _logSeg);
......@@ -5984,7 +6191,7 @@ pg_stop_backup(PG_FUNCTION_ARGS)
CleanupBackupHistory();
/*
* We're done. As a convenience, return the ending WAL offset.
* We're done. As a convenience, return the ending WAL location.
*/
snprintf(stopxlogfilename, sizeof(stopxlogfilename), "%X/%X",
stoppoint.xlogid, stoppoint.xrecoff);
......@@ -5993,6 +6200,144 @@ pg_stop_backup(PG_FUNCTION_ARGS)
PG_RETURN_TEXT_P(result);
}
/*
* pg_switch_xlog: switch to next xlog file
*/
Datum
pg_switch_xlog(PG_FUNCTION_ARGS)
{
text *result;
XLogRecPtr switchpoint;
char location[MAXFNAMELEN];
if (!superuser())
ereport(ERROR,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
(errmsg("must be superuser to switch xlog files"))));
switchpoint = RequestXLogSwitch();
/*
* As a convenience, return the WAL location of the switch record
*/
snprintf(location, sizeof(location), "%X/%X",
switchpoint.xlogid, switchpoint.xrecoff);
result = DatumGetTextP(DirectFunctionCall1(textin,
CStringGetDatum(location)));
PG_RETURN_TEXT_P(result);
}
/*
* Report the current WAL location (same format as pg_start_backup etc)
*/
Datum
pg_current_xlog_location(PG_FUNCTION_ARGS)
{
text *result;
XLogCtlInsert *Insert = &XLogCtl->Insert;
XLogRecPtr current_recptr;
char location[MAXFNAMELEN];
/*
* Get the current end-of-WAL position ... shared lock is sufficient
*/
LWLockAcquire(WALInsertLock, LW_SHARED);
INSERT_RECPTR(current_recptr, Insert, Insert->curridx);
LWLockRelease(WALInsertLock);
snprintf(location, sizeof(location), "%X/%X",
current_recptr.xlogid, current_recptr.xrecoff);
result = DatumGetTextP(DirectFunctionCall1(textin,
CStringGetDatum(location)));
PG_RETURN_TEXT_P(result);
}
/*
* Compute an xlog file name and decimal byte offset given a WAL location,
* such as is returned by pg_stop_backup() or pg_xlog_switch().
*
* Note that a location exactly at a segment boundary is taken to be in
* the previous segment. This is usually the right thing, since the
* expected usage is to determine which xlog file(s) are ready to archive.
*/
Datum
pg_xlogfile_name_offset(PG_FUNCTION_ARGS)
{
text *location = PG_GETARG_TEXT_P(0);
text *result;
char *locationstr;
unsigned int uxlogid;
unsigned int uxrecoff;
uint32 xlogid;
uint32 xlogseg;
uint32 xrecoff;
XLogRecPtr locationpoint;
char xlogfilename[MAXFNAMELEN];
locationstr = DatumGetCString(DirectFunctionCall1(textout,
PointerGetDatum(location)));
if (sscanf(locationstr, "%X/%X", &uxlogid, &uxrecoff) != 2)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("could not parse xlog location \"%s\"",
locationstr)));
locationpoint.xlogid = uxlogid;
locationpoint.xrecoff = uxrecoff;
XLByteToPrevSeg(locationpoint, xlogid, xlogseg);
XLogFileName(xlogfilename, ThisTimeLineID, xlogid, xlogseg);
xrecoff = locationpoint.xrecoff - xlogseg * XLogSegSize;
snprintf(xlogfilename + strlen(xlogfilename),
sizeof(xlogfilename) - strlen(xlogfilename),
" %u",
(unsigned int) xrecoff);
result = DatumGetTextP(DirectFunctionCall1(textin,
CStringGetDatum(xlogfilename)));
PG_RETURN_TEXT_P(result);
}
/*
* Compute an xlog file name given a WAL location,
* such as is returned by pg_stop_backup() or pg_xlog_switch().
*/
Datum
pg_xlogfile_name(PG_FUNCTION_ARGS)
{
text *location = PG_GETARG_TEXT_P(0);
text *result;
char *locationstr;
unsigned int uxlogid;
unsigned int uxrecoff;
uint32 xlogid;
uint32 xlogseg;
XLogRecPtr locationpoint;
char xlogfilename[MAXFNAMELEN];
locationstr = DatumGetCString(DirectFunctionCall1(textout,
PointerGetDatum(location)));
if (sscanf(locationstr, "%X/%X", &uxlogid, &uxrecoff) != 2)
ereport(ERROR,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
errmsg("could not parse xlog location \"%s\"",
locationstr)));
locationpoint.xlogid = uxlogid;
locationpoint.xrecoff = uxrecoff;
XLByteToPrevSeg(locationpoint, xlogid, xlogseg);
XLogFileName(xlogfilename, ThisTimeLineID, xlogid, xlogseg);
result = DatumGetTextP(DirectFunctionCall1(textin,
CStringGetDatum(xlogfilename)));
PG_RETURN_TEXT_P(result);
}
/*
* read_backup_label: check to see if a backup_label file is present
*
......@@ -6133,8 +6478,8 @@ rm_redo_error_callback(void *arg)
StringInfoData buf;
initStringInfo(&buf);
RmgrTable[record->xl_rmid].rm_desc(&buf,
record->xl_info,
RmgrTable[record->xl_rmid].rm_desc(&buf,
record->xl_info,
XLogRecGetData(record));
/* don't bother emitting empty description */
......
src/include/access/xlog_internal.h
View file @ 704ddaaa
......@@ -11,7 +11,7 @@
* Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $PostgreSQL: pgsql/src/include/access/xlog_internal.h,v 1.13 2006/04/05 03:34:05 tgl Exp $
* $PostgreSQL: pgsql/src/include/access/xlog_internal.h,v 1.14 2006/08/06 03:53:44 tgl Exp $
*/
#ifndef XLOG_INTERNAL_H
#define XLOG_INTERNAL_H
......@@ -241,5 +241,9 @@ extern const RmgrData RmgrTable[];
*/
extern Datum pg_start_backup(PG_FUNCTION_ARGS);
extern Datum pg_stop_backup(PG_FUNCTION_ARGS);
extern Datum pg_switch_xlog(PG_FUNCTION_ARGS);
extern Datum pg_current_xlog_location(PG_FUNCTION_ARGS);
extern Datum pg_xlogfile_name_offset(PG_FUNCTION_ARGS);
extern Datum pg_xlogfile_name(PG_FUNCTION_ARGS);
#endif /* XLOG_INTERNAL_H */
src/include/catalog/catversion.h
View file @ 704ddaaa
......@@ -37,7 +37,7 @@
* Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $PostgreSQL: pgsql/src/include/catalog/catversion.h,v 1.346 2006/08/02 01:59:47 joe Exp $
* $PostgreSQL: pgsql/src/include/catalog/catversion.h,v 1.347 2006/08/06 03:53:44 tgl Exp $
*
*-------------------------------------------------------------------------
*/
......@@ -53,6 +53,6 @@
*/
/* yyyymmddN */
#define CATALOG_VERSION_NO 200608011
#define CATALOG_VERSION_NO 200608051
#endif
src/include/catalog/pg_control.h
View file @ 704ddaaa
......@@ -8,7 +8,7 @@
* Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $PostgreSQL: pgsql/src/include/catalog/pg_control.h,v 1.29 2006/04/04 22:39:59 tgl Exp $
* $PostgreSQL: pgsql/src/include/catalog/pg_control.h,v 1.30 2006/08/06 03:53:44 tgl Exp $
*
*-------------------------------------------------------------------------
*/
......@@ -47,6 +47,7 @@ typedef struct CheckPoint
#define XLOG_CHECKPOINT_SHUTDOWN 0x00
#define XLOG_CHECKPOINT_ONLINE 0x10
#define XLOG_NEXTOID 0x30
#define XLOG_SWITCH 0x40
/* System status indicator */
......
src/include/catalog/pg_proc.h
View file @ 704ddaaa
......@@ -7,7 +7,7 @@
* Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
* $PostgreSQL: pgsql/src/include/catalog/pg_proc.h,v 1.419 2006/07/28 18:33:04 tgl Exp $
* $PostgreSQL: pgsql/src/include/catalog/pg_proc.h,v 1.420 2006/08/06 03:53:44 tgl Exp $
*
* NOTES
* The script catalog/genbki.sh reads this file and generates .bki
......@@ -3101,6 +3101,14 @@ DATA(insert OID = 2172 ( pg_start_backup PGNSP PGUID 12 f f t f v 1 25 "25" _nu
DESCR("Prepare for taking an online backup");
DATA(insert OID = 2173 ( pg_stop_backup PGNSP PGUID 12 f f t f v 0 25 "" _null_ _null_ _null_ pg_stop_backup - _null_ ));
DESCR("Finish taking an online backup");
DATA(insert OID = 2848 ( pg_switch_xlog PGNSP PGUID 12 f f t f v 0 25 "" _null_ _null_ _null_ pg_switch_xlog - _null_ ));
DESCR("Switch to new xlog file");
DATA(insert OID = 2849 ( pg_current_xlog_location PGNSP PGUID 12 f f t f v 0 25 "" _null_ _null_ _null_ pg_current_xlog_location - _null_ ));
DESCR("current xlog location");
DATA(insert OID = 2850 ( pg_xlogfile_name_offset PGNSP PGUID 12 f f t f i 1 25 "25" _null_ _null_ _null_ pg_xlogfile_name_offset - _null_ ));
DESCR("xlog filename and byte offset, given an xlog location");
DATA(insert OID = 2851 ( pg_xlogfile_name PGNSP PGUID 12 f f t f i 1 25 "25" _null_ _null_ _null_ pg_xlogfile_name - _null_ ));
DESCR("xlog filename, given an xlog location");
DATA(insert OID = 2621 ( pg_reload_conf PGNSP PGUID 12 f f t f v 0 16 "" _null_ _null_ _null_ pg_reload_conf - _null_ ));
DESCR("Reload configuration files");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment