Correct several behavior descriptions in comments.

Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README.  SLRUs have had access to six-character
segments names since commit 73c986ad,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165.  The other corrections
are more self-evident.

src/backend/access/heap/heapam.c

@@ -6920,8 +6920,6 @@ HeapTupleHeaderAdvanceLatestRemovedXid(HeapTupleHeader tuple,
 	 * updated/deleted by the inserting transaction.
 	 *
 	 * Look for a committed hint bit, or if no xmin bit is set, check clog.
-	 * This needs to work on both primary and standby, where it is used to
-	 * assess btree delete records.
 	 */
 	if (HeapTupleHeaderXminCommitted(tuple) ||
 		(!HeapTupleHeaderXminInvalid(tuple) && TransactionIdDidCommit(xmin)))

src/backend/access/transam/README

@@ -635,12 +635,11 @@ be reconstructed later following a crash and the action is simply a way
 of optimising for performance. When a hint is written we use
 MarkBufferDirtyHint() to mark the block dirty.
 
-If the buffer is clean and checksums are in use then
-MarkBufferDirtyHint() inserts an XLOG_FPI record to ensure that we
-take a full page image that includes the hint. We do this to avoid
-a partial page write, when we write the dirtied page. WAL is not
-written during recovery, so we simply skip dirtying blocks because
-of hints when in recovery.
+If the buffer is clean and checksums are in use then MarkBufferDirtyHint()
+inserts an XLOG_FPI_FOR_HINT record to ensure that we take a full page image
+that includes the hint. We do this to avoid a partial page write, when we
+write the dirtied page. WAL is not written during recovery, so we simply skip
+dirtying blocks because of hints when in recovery.
 
 If you do decide to optimise away a WAL record, then any calls to
 MarkBufferDirty() must be replaced by MarkBufferDirtyHint(),

src/backend/access/transam/varsup.c

@@ -367,12 +367,13 @@ SetTransactionIdLimit(TransactionId oldest_datfrozenxid, Oid oldest_datoid)
 	 * We'll refuse to continue assigning XIDs in interactive mode once we get
 	 * within 3M transactions of data loss.  This leaves lots of room for the
 	 * DBA to fool around fixing things in a standalone backend, while not
-	 * being significant compared to total XID space. (Note that since
-	 * vacuuming requires one transaction per table cleaned, we had better be
-	 * sure there's lots of XIDs left...)  Also, at default BLCKSZ, this
-	 * leaves two completely-idle segments.  In the event of edge-case bugs
-	 * involving page or segment arithmetic, idle segments render the bugs
-	 * unreachable outside of single-user mode.
+	 * being significant compared to total XID space. (VACUUM requires an XID
+	 * if it truncates at wal_level!=minimal.  "VACUUM (ANALYZE)", which a DBA
+	 * might do by reflex, assigns an XID.  Hence, we had better be sure
+	 * there's lots of XIDs left...)  Also, at default BLCKSZ, this leaves two
+	 * completely-idle segments.  In the event of edge-case bugs involving
+	 * page or segment arithmetic, idle segments render the bugs unreachable
+	 * outside of single-user mode.
 	 */
 	xidStopLimit = xidWrapLimit - 3000000;
 	if (xidStopLimit < FirstNormalTransactionId)

src/backend/commands/async.c

@@ -302,13 +302,10 @@ static SlruCtlData NotifyCtlData;
 #define QUEUE_FULL_WARN_INTERVAL	5000	/* warn at most once every 5s */
 
 /*
- * slru.c currently assumes that all filenames are four characters of hex
- * digits. That means that we can use segments 0000 through FFFF.
- * Each segment contains SLRU_PAGES_PER_SEGMENT pages which gives us
- * the pages from 0 to SLRU_PAGES_PER_SEGMENT * 0x10000 - 1.
- *
- * It's of course possible to enhance slru.c, but this gives us so much
- * space already that it doesn't seem worth the trouble.
+ * Use segments 0000 through FFFF.  Each contains SLRU_PAGES_PER_SEGMENT pages
+ * which gives us the pages from 0 to SLRU_PAGES_PER_SEGMENT * 0x10000 - 1.
+ * We could use as many segments as SlruScanDirectory() allows, but this gives
+ * us so much space already that it doesn't seem worth the trouble.
  *
  * The most data we can have in the queue at a time is QUEUE_MAX_PAGE/2
  * pages, because more than that would confuse slru.c into thinking there

src/backend/commands/vacuum.c

@@ -949,11 +949,11 @@ vacuum_set_xid_limits(Relation rel,
 	/*
 	 * We can always ignore processes running lazy vacuum.  This is because we
 	 * use these values only for deciding which tuples we must keep in the
-	 * tables.  Since lazy vacuum doesn't write its XID anywhere, it's safe to
-	 * ignore it.  In theory it could be problematic to ignore lazy vacuums in
-	 * a full vacuum, but keep in mind that only one vacuum process can be
-	 * working on a particular table at any time, and that each vacuum is
-	 * always an independent transaction.
+	 * tables.  Since lazy vacuum doesn't write its XID anywhere (usually no
+	 * XID assigned), it's safe to ignore it.  In theory it could be
+	 * problematic to ignore lazy vacuums in a full vacuum, but keep in mind
+	 * that only one vacuum process can be working on a particular table at
+	 * any time, and that each vacuum is always an independent transaction.
 	 */
 	*oldestXmin = GetOldestNonRemovableTransactionId(rel);
 

src/backend/storage/buffer/bufmgr.c

@@ -3578,7 +3578,7 @@ IncrBufferRefCount(Buffer buffer)
  * This is essentially the same as MarkBufferDirty, except:
  *
  * 1. The caller does not write WAL; so if checksums are enabled, we may need
- *	  to write an XLOG_FPI WAL record to protect against torn pages.
+ *	  to write an XLOG_FPI_FOR_HINT WAL record to protect against torn pages.
  * 2. The caller might have only share-lock instead of exclusive-lock on the
  *	  buffer's content lock.
  * 3. This function does not guarantee that the buffer is always marked dirty

src/bin/pg_waldump/pg_waldump.c

@@ -611,14 +611,9 @@ XLogDumpDisplayStats(XLogDumpConfig *config, XLogDumpStats *stats)
 	double		rec_len_pct,
 				fpi_len_pct;
 
-	/* ---
-	 * Make a first pass to calculate column totals:
-	 * count(*),
-	 * sum(xl_len+SizeOfXLogRecord),
-	 * sum(xl_tot_len-xl_len-SizeOfXLogRecord), and
-	 * sum(xl_tot_len).
-	 * These are used to calculate percentages for each record type.
-	 * ---
+	/*
+	 * Each row shows its percentages of the total, so make a first pass to
+	 * calculate column totals.
 	 */
 
 	for (ri = 0; ri < RM_NEXT_ID; ri++)

src/include/access/xlog_internal.h

@@ -43,11 +43,8 @@ typedef struct XLogPageHeaderData
 	/*
 	 * When there is not enough space on current page for whole record, we
 	 * continue on the next page.  xlp_rem_len is the number of bytes
-	 * remaining from a previous page.
-	 *
-	 * Note that xlp_rem_len includes backup-block data; that is, it tracks
-	 * xl_tot_len not xl_len in the initial header.  Also note that the
-	 * continuation data isn't necessarily aligned.
+	 * remaining from a previous page; it tracks xl_tot_len in the initial
+	 * header.  Note that the continuation data isn't necessarily aligned.
 	 */
 	uint32		xlp_rem_len;	/* total len of remaining data for record */
 } XLogPageHeaderData;

src/test/kerberos/README

@@ -8,10 +8,12 @@ functionality.  This requires a full MIT Kerberos installation,
 including server and client tools, and is therefore kept separate and
 not run by default.
 
-Also, this test suite creates a KDC server that listens for TCP/IP
-connections on localhost without any real access control, so it is not
-safe to run this on a system where there might be untrusted local
-users.
+CAUTION: The test server run by this test is configured to listen for TCP
+connections on localhost. Any user on the same host is able to log in to the
+test server while the tests are running. Do not run this suite on a multi-user
+system where you don't trust all local users! Also, this test suite creates a
+KDC server that listens for TCP/IP connections on localhost without any real
+access control.
 
 Running the tests
 =================

src/test/perl/PostgresNode.pm

@@ -1234,10 +1234,8 @@ sub can_bind
 	return $ret;
 }
 
-# Automatically shut down any still-running nodes when the test script exits.
-# Note that this just stops the postmasters (in the same order the nodes were
-# created in).  Any temporary directories are deleted, in an unspecified
-# order, later when the File::Temp objects are destroyed.
+# Automatically shut down any still-running nodes (in the same order the nodes
+# were created in) when the test script exits.
 END
 {
 

src/test/recovery/t/010_logical_decoding_timelines.pl

@@ -111,7 +111,7 @@ is($stdout, 'before_basebackup',
 # Examine the physical slot the replica uses to stream changes
 # from the primary to make sure its hot_standby_feedback
 # has locked in a catalog_xmin on the physical slot, and that
-# any xmin is < the catalog_xmin
+# any xmin is >= the catalog_xmin
 $node_primary->poll_query_until(
 	'postgres', q[
 	SELECT catalog_xmin IS NOT NULL

src/test/ssl/t/SSLServer.pm

@@ -9,7 +9,6 @@
 # - a database called trustdb that lets anyone in
 # - another database called certdb that uses certificate authentication, ie.
 #   the client must present a valid certificate signed by the client CA
-# - two users, called ssltestuser and anotheruser.
 #
 # The server is configured to only accept connections from localhost. If you
 # want to run the client from another host, you'll have to configure that