Skip to content

P
Postgres FD Implementation
Commit 64ee636a authored by Tom Lane's avatar Tom Lane
Browse files
Options

Release notes for 9.6.2, 9.5.6, 9.4.11, 9.3.16, 9.2.20.

parent 696af9ab
Hide whitespace changes
Inline Side-by-side
Showing with 2058 additions and 60 deletions
doc/src/sgml/release-9.2.sgml
View file @ 64ee636a
<!-- doc/src/sgml/release-9.2.sgml -->
<!-- See header comment in release.sgml about typical markup -->
<sect1 id="release-9-2-20">
<title>Release 9.2.20</title>
<note>
<title>Release Date</title>
<simpara>2017-02-09</simpara>
</note>
<para>
This release contains a variety of fixes from 9.2.19.
For information about new features in the 9.2 major release, see
<xref linkend="release-9-2">.
</para>
<sect2>
<title>Migration to Version 9.2.20</title>
<para>
A dump/restore is not required for those running 9.2.X.
</para>
<para>
However, if your installation has been affected by the bug described in
the first changelog entry below, then after updating you may need
to take action to repair corrupted indexes.
</para>
<para>
Also, if you are upgrading from a version earlier than 9.2.11,
see <xref linkend="release-9-2-11">.
</para>
</sect2>
<sect2>
<title>Changes</title>
<itemizedlist>
<listitem>
<para>
Fix a race condition that could cause indexes built
with <command>CREATE INDEX CONCURRENTLY</> to be corrupt
(Pavan Deolasee, Tom Lane)
</para>
<para>
If <command>CREATE INDEX CONCURRENTLY</> was used to build an index
that depends on a column not previously indexed, then rows inserted
or updated by transactions that ran concurrently with
the <command>CREATE INDEX</> command could have received incorrect
index entries. If you suspect this may have happened, the most
reliable solution is to rebuild affected indexes after installing
this update.
</para>
</listitem>
<listitem>
<para>
Unconditionally WAL-log creation of the <quote>init fork</> for an
unlogged table (Michael Paquier)
</para>
<para>
Previously, this was skipped when <xref linkend="guc-wal-level">
= <literal>minimal</>, but actually it's necessary even in that case
to ensure that the unlogged table is properly reset to empty after a
crash.
</para>
</listitem>
<listitem>
<!--
Author: Fujii Masao <fujii@postgresql.org>
Branch: REL9_2_STABLE [38bec1805] 2017-01-25 07:02:25 +0900
-->
<para>
Fix WAL page header validation when re-reading segments (Takayuki
Tsunakawa, Amit Kapila)
</para>
<para>
In corner cases, a spurious <quote>out-of-sequence TLI</> error
could be reported during recovery.
</para>
</listitem>
<listitem>
<para>
If the stats collector dies during hot standby, restart it (Takayuki
Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Check for interrupts while hot standby is waiting for a conflicting
query (Simon Riggs)
</para>
</listitem>
<listitem>
<para>
Avoid constantly respawning the autovacuum launcher in a corner case
(Amit Khandekar)
</para>
<para>
This fix avoids problems when autovacuum is nominally off and there
are some tables that require freezing, but all such tables are
already being processed by autovacuum workers.
</para>
</listitem>
<listitem>
<para>
Fix check for when an extension member object can be dropped (Tom Lane)
</para>
<para>
Extension upgrade scripts should be able to drop member objects,
but this was disallowed for serial-column sequences, and possibly
other cases.
</para>
</listitem>
<listitem>
<para>
Make sure <command>ALTER TABLE</> preserves index tablespace
assignments when rebuilding indexes (Tom Lane, Michael Paquier)
</para>
<para>
Previously, non-default settings
of <xref linkend="guc-default-tablespace"> could result in broken
indexes.
</para>
</listitem>
<listitem>
<para>
Prevent dropping a foreign-key constraint if there are pending
trigger events for the referenced relation (Tom Lane)
</para>
<para>
This avoids <quote>could not find trigger <replaceable>NNN</></quote>
or <quote>relation <replaceable>NNN</> has no triggers</quote> errors.
</para>
</listitem>
<listitem>
<para>
Fix processing of OID column when a table with OIDs is associated to
a parent with OIDs via <command>ALTER TABLE ... INHERIT</> (Amit
Langote)
</para>
<para>
The OID column should be treated the same as regular user columns in
this case, but it wasn't, leading to odd behavior in later
inheritance changes.
</para>
</listitem>
<listitem>
<para>
Check for serializability conflicts before reporting
constraint-violation failures (Thomas Munro)
</para>
<para>
When using serializable transaction isolation, it is desirable
that any error due to concurrent transactions should manifest
as a serialization failure, thereby cueing the application that
a retry might succeed. Unfortunately, this does not reliably
happen for duplicate-key failures caused by concurrent insertions.
This change ensures that such an error will be reported as a
serialization error if the application explicitly checked for
the presence of a conflicting key (and did not find it) earlier
in the transaction.
</para>
</listitem>
<listitem>
<para>
Ensure that column typmods are determined accurately for
multi-row <literal>VALUES</> constructs (Tom Lane)
</para>
<para>
This fixes problems occurring when the first value in a column has a
determinable typmod (e.g., length for a <type>varchar</> value) but
later values don't share the same limit.
</para>
</listitem>
<listitem>
<para>
Throw error for an unfinished Unicode surrogate pair at the end of a
Unicode string (Tom Lane)
</para>
<para>
Normally, a Unicode surrogate leading character must be followed by a
Unicode surrogate trailing character, but the check for this was
missed if the leading character was the last character in a Unicode
string literal (<literal>U&amp;'...'</>) or Unicode identifier
(<literal>U&amp;"..."</>).
</para>
</listitem>
<listitem>
<para>
Ensure that a purely negative text search query, such
as <literal>!foo</>, matches empty <type>tsvector</>s (Tom Dunstan)
</para>
<para>
Such matches were found by GIN index searches, but not by sequential
scans or GiST index searches.
</para>
</listitem>
<listitem>
<para>
Prevent crash when <function>ts_rewrite()</> replaces a non-top-level
subtree with an empty query (Artur Zakirov)
</para>
</listitem>
<listitem>
<para>
Fix performance problems in <function>ts_rewrite()</> (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>ts_rewrite()</>'s handling of nested NOT operators
(Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>array_fill()</> to handle empty arrays properly (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun in <function>quote_literal_cstr()</>
(Heikki Linnakangas)
</para>
<para>
The overrun occurred only if the input consisted entirely of single
quotes and/or backslashes.
</para>
</listitem>
<listitem>
<para>
Prevent multiple calls of <function>pg_start_backup()</>
and <function>pg_stop_backup()</> from running concurrently (Michael
Paquier)
</para>
<para>
This avoids an assertion failure, and possibly worse things, if
someone tries to run these functions in parallel.
</para>
</listitem>
<listitem>
<para>
Avoid discarding <type>interval</>-to-<type>interval</> casts
that aren't really no-ops (Tom Lane)
</para>
<para>
In some cases, a cast that should result in zeroing out
low-order <type>interval</> fields was mistakenly deemed to be a
no-op and discarded. An example is that casting from <type>INTERVAL
MONTH</> to <type>INTERVAL YEAR</> failed to clear the months field.
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_dump</> to dump user-defined casts and transforms
that use built-in functions (Stephen Frost)
</para>
</listitem>
<listitem>
<para>
Fix possible <application>pg_basebackup</> failure on standby
server when including WAL files (Amit Kapila, Robert Haas)
</para>
</listitem>
<listitem>
<para>
Ensure that the Python exception objects we create for PL/Python are
properly reference-counted (Rafa de la Torre, Tom Lane)
</para>
<para>
This avoids failures if the objects are used after a Python garbage
collection cycle has occurred.
</para>
</listitem>
<listitem>
<para>
Fix PL/Tcl to support triggers on tables that have <literal>.tupno</>
as a column name (Tom Lane)
</para>
<para>
This matches the (previously undocumented) behavior of
PL/Tcl's <command>spi_exec</> and <command>spi_execp</> commands,
namely that a magic <literal>.tupno</> column is inserted only if
there isn't a real column named that.
</para>
</listitem>
<listitem>
<para>
Allow DOS-style line endings in <filename>~/.pgpass</> files,
even on Unix (Vik Fearing)
</para>
<para>
This change simplifies use of the same password file across Unix and
Windows machines.
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun if <application>ecpg</> is given a file
name that ends with a dot (Takayuki Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Fix <application>psql</>'s tab completion for <command>ALTER DEFAULT
PRIVILEGES</> (Gilles Darold, Stephen Frost)
</para>
</listitem>
<listitem>
<para>
In <application>psql</>, treat an empty or all-blank setting of
the <envar>PAGER</> environment variable as meaning <quote>no
pager</> (Tom Lane)
</para>
<para>
Previously, such a setting caused output intended for the pager to
vanish entirely.
</para>
</listitem>
<listitem>
<para>
Improve <filename>contrib/dblink</>'s reporting of
low-level <application>libpq</> errors, such as out-of-memory
(Joe Conway)
</para>
</listitem>
<listitem>
<para>
On Windows, ensure that environment variable changes are propagated
to DLLs built with debug options (Christian Ullrich)
</para>
</listitem>
<listitem>
<para>
Sync our copy of the timezone library with IANA release tzcode2016j
(Tom Lane)
</para>
<para>
This fixes various issues, most notably that timezone data
installation failed if the target directory didn't support hard
links.
</para>
</listitem>
<listitem>
<para>
Update time zone data files to <application>tzdata</> release 2016j
for DST law changes in northern Cyprus (adding a new zone
Asia/Famagusta), Russia (adding a new zone Europe/Saratov), Tonga,
and Antarctica/Casey.
Historical corrections for Italy, Kazakhstan, Malta, and Palestine.
Switch to preferring numeric zone abbreviations for Tonga.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="release-9-2-19">
<title>Release 9.2.19</title>
......
doc/src/sgml/release-9.3.sgml
View file @ 64ee636a
<!-- doc/src/sgml/release-9.3.sgml -->
<!-- See header comment in release.sgml about typical markup -->
<sect1 id="release-9-3-16">
<title>Release 9.3.16</title>
<note>
<title>Release Date</title>
<simpara>2017-02-09</simpara>
</note>
<para>
This release contains a variety of fixes from 9.3.15.
For information about new features in the 9.3 major release, see
<xref linkend="release-9-3">.
</para>
<sect2>
<title>Migration to Version 9.3.16</title>
<para>
A dump/restore is not required for those running 9.3.X.
</para>
<para>
However, if your installation has been affected by the bug described in
the first changelog entry below, then after updating you may need
to take action to repair corrupted indexes.
</para>
<para>
Also, if you are upgrading from a version earlier than 9.3.15,
see <xref linkend="release-9-3-15">.
</para>
</sect2>
<sect2>
<title>Changes</title>
<itemizedlist>
<listitem>
<para>
Fix a race condition that could cause indexes built
with <command>CREATE INDEX CONCURRENTLY</> to be corrupt
(Pavan Deolasee, Tom Lane)
</para>
<para>
If <command>CREATE INDEX CONCURRENTLY</> was used to build an index
that depends on a column not previously indexed, then rows inserted
or updated by transactions that ran concurrently with
the <command>CREATE INDEX</> command could have received incorrect
index entries. If you suspect this may have happened, the most
reliable solution is to rebuild affected indexes after installing
this update.
</para>
</listitem>
<listitem>
<para>
Unconditionally WAL-log creation of the <quote>init fork</> for an
unlogged table (Michael Paquier)
</para>
<para>
Previously, this was skipped when <xref linkend="guc-wal-level">
= <literal>minimal</>, but actually it's necessary even in that case
to ensure that the unlogged table is properly reset to empty after a
crash.
</para>
</listitem>
<listitem>
<para>
If the stats collector dies during hot standby, restart it (Takayuki
Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Ensure that hot standby feedback works correctly when it's enabled at
standby server start (Ants Aasma, Craig Ringer)
</para>
</listitem>
<listitem>
<para>
Check for interrupts while hot standby is waiting for a conflicting
query (Simon Riggs)
</para>
</listitem>
<listitem>
<para>
Avoid constantly respawning the autovacuum launcher in a corner case
(Amit Khandekar)
</para>
<para>
This fix avoids problems when autovacuum is nominally off and there
are some tables that require freezing, but all such tables are
already being processed by autovacuum workers.
</para>
</listitem>
<listitem>
<para>
Fix check for when an extension member object can be dropped (Tom Lane)
</para>
<para>
Extension upgrade scripts should be able to drop member objects,
but this was disallowed for serial-column sequences, and possibly
other cases.
</para>
</listitem>
<listitem>
<para>
Make sure <command>ALTER TABLE</> preserves index tablespace
assignments when rebuilding indexes (Tom Lane, Michael Paquier)
</para>
<para>
Previously, non-default settings
of <xref linkend="guc-default-tablespace"> could result in broken
indexes.
</para>
</listitem>
<listitem>
<para>
Prevent dropping a foreign-key constraint if there are pending
trigger events for the referenced relation (Tom Lane)
</para>
<para>
This avoids <quote>could not find trigger <replaceable>NNN</></quote>
or <quote>relation <replaceable>NNN</> has no triggers</quote> errors.
</para>
</listitem>
<listitem>
<para>
Fix processing of OID column when a table with OIDs is associated to
a parent with OIDs via <command>ALTER TABLE ... INHERIT</> (Amit
Langote)
</para>
<para>
The OID column should be treated the same as regular user columns in
this case, but it wasn't, leading to odd behavior in later
inheritance changes.
</para>
</listitem>
<listitem>
<para>
Report correct object identity during <command>ALTER TEXT SEARCH
CONFIGURATION</> (Artur Zakirov)
</para>
<para>
The wrong catalog OID was reported to extensions such as logical
decoding.
</para>
</listitem>
<listitem>
<para>
Check for serializability conflicts before reporting
constraint-violation failures (Thomas Munro)
</para>
<para>
When using serializable transaction isolation, it is desirable
that any error due to concurrent transactions should manifest
as a serialization failure, thereby cueing the application that
a retry might succeed. Unfortunately, this does not reliably
happen for duplicate-key failures caused by concurrent insertions.
This change ensures that such an error will be reported as a
serialization error if the application explicitly checked for
the presence of a conflicting key (and did not find it) earlier
in the transaction.
</para>
</listitem>
<listitem>
<para>
Prevent multicolumn expansion of <replaceable>foo</><literal>.*</> in
an <command>UPDATE</> source expression (Tom Lane)
</para>
<para>
This led to <quote>UPDATE target count mismatch --- internal
error</>. Now the syntax is understood as a whole-row variable,
as it would be in other contexts.
</para>
</listitem>
<listitem>
<para>
Ensure that column typmods are determined accurately for
multi-row <literal>VALUES</> constructs (Tom Lane)
</para>
<para>
This fixes problems occurring when the first value in a column has a
determinable typmod (e.g., length for a <type>varchar</> value) but
later values don't share the same limit.
</para>
</listitem>
<listitem>
<para>
Throw error for an unfinished Unicode surrogate pair at the end of a
Unicode string (Tom Lane)
</para>
<para>
Normally, a Unicode surrogate leading character must be followed by a
Unicode surrogate trailing character, but the check for this was
missed if the leading character was the last character in a Unicode
string literal (<literal>U&amp;'...'</>) or Unicode identifier
(<literal>U&amp;"..."</>).
</para>
</listitem>
<listitem>
<para>
Ensure that a purely negative text search query, such
as <literal>!foo</>, matches empty <type>tsvector</>s (Tom Dunstan)
</para>
<para>
Such matches were found by GIN index searches, but not by sequential
scans or GiST index searches.
</para>
</listitem>
<listitem>
<para>
Prevent crash when <function>ts_rewrite()</> replaces a non-top-level
subtree with an empty query (Artur Zakirov)
</para>
</listitem>
<listitem>
<para>
Fix performance problems in <function>ts_rewrite()</> (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>ts_rewrite()</>'s handling of nested NOT operators
(Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>array_fill()</> to handle empty arrays properly (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun in <function>quote_literal_cstr()</>
(Heikki Linnakangas)
</para>
<para>
The overrun occurred only if the input consisted entirely of single
quotes and/or backslashes.
</para>
</listitem>
<listitem>
<para>
Prevent multiple calls of <function>pg_start_backup()</>
and <function>pg_stop_backup()</> from running concurrently (Michael
Paquier)
</para>
<para>
This avoids an assertion failure, and possibly worse things, if
someone tries to run these functions in parallel.
</para>
</listitem>
<listitem>
<para>
Avoid discarding <type>interval</>-to-<type>interval</> casts
that aren't really no-ops (Tom Lane)
</para>
<para>
In some cases, a cast that should result in zeroing out
low-order <type>interval</> fields was mistakenly deemed to be a
no-op and discarded. An example is that casting from <type>INTERVAL
MONTH</> to <type>INTERVAL YEAR</> failed to clear the months field.
</para>
</listitem>
<listitem>
<para>
Ensure that cached plans are invalidated by changes in foreign-table
options (Amit Langote, Etsuro Fujita, Ashutosh Bapat)
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_dump</> to dump user-defined casts and transforms
that use built-in functions (Stephen Frost)
</para>
</listitem>
<listitem>
<para>
Fix possible <application>pg_basebackup</> failure on standby
server when including WAL files (Amit Kapila, Robert Haas)
</para>
</listitem>
<listitem>
<para>
Ensure that the Python exception objects we create for PL/Python are
properly reference-counted (Rafa de la Torre, Tom Lane)
</para>
<para>
This avoids failures if the objects are used after a Python garbage
collection cycle has occurred.
</para>
</listitem>
<listitem>
<para>
Fix PL/Tcl to support triggers on tables that have <literal>.tupno</>
as a column name (Tom Lane)
</para>
<para>
This matches the (previously undocumented) behavior of
PL/Tcl's <command>spi_exec</> and <command>spi_execp</> commands,
namely that a magic <literal>.tupno</> column is inserted only if
there isn't a real column named that.
</para>
</listitem>
<listitem>
<para>
Allow DOS-style line endings in <filename>~/.pgpass</> files,
even on Unix (Vik Fearing)
</para>
<para>
This change simplifies use of the same password file across Unix and
Windows machines.
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun if <application>ecpg</> is given a file
name that ends with a dot (Takayuki Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Fix <application>psql</>'s tab completion for <command>ALTER DEFAULT
PRIVILEGES</> (Gilles Darold, Stephen Frost)
</para>
</listitem>
<listitem>
<para>
In <application>psql</>, treat an empty or all-blank setting of
the <envar>PAGER</> environment variable as meaning <quote>no
pager</> (Tom Lane)
</para>
<para>
Previously, such a setting caused output intended for the pager to
vanish entirely.
</para>
</listitem>
<listitem>
<para>
Improve <filename>contrib/dblink</>'s reporting of
low-level <application>libpq</> errors, such as out-of-memory
(Joe Conway)
</para>
</listitem>
<listitem>
<para>
Teach <filename>contrib/dblink</> to ignore irrelevant server options
when it uses a <filename>contrib/postgres_fdw</> foreign server as
the source of connection options (Corey Huinker)
</para>
<para>
Previously, if the foreign server object had options that were not
also <application>libpq</> connection options, an error occurred.
</para>
</listitem>
<listitem>
<para>
On Windows, ensure that environment variable changes are propagated
to DLLs built with debug options (Christian Ullrich)
</para>
</listitem>
<listitem>
<para>
Sync our copy of the timezone library with IANA release tzcode2016j
(Tom Lane)
</para>
<para>
This fixes various issues, most notably that timezone data
installation failed if the target directory didn't support hard
links.
</para>
</listitem>
<listitem>
<para>
Update time zone data files to <application>tzdata</> release 2016j
for DST law changes in northern Cyprus (adding a new zone
Asia/Famagusta), Russia (adding a new zone Europe/Saratov), Tonga,
and Antarctica/Casey.
Historical corrections for Italy, Kazakhstan, Malta, and Palestine.
Switch to preferring numeric zone abbreviations for Tonga.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="release-9-3-15">
<title>Release 9.3.15</title>
......
doc/src/sgml/release-9.4.sgml
View file @ 64ee636a
<!-- doc/src/sgml/release-9.4.sgml -->
<!-- See header comment in release.sgml about typical markup -->
<sect1 id="release-9-4-11">
<title>Release 9.4.11</title>
<note>
<title>Release Date</title>
<simpara>2017-02-09</simpara>
</note>
<para>
This release contains a variety of fixes from 9.4.10.
For information about new features in the 9.4 major release, see
<xref linkend="release-9-4">.
</para>
<sect2>
<title>Migration to Version 9.4.11</title>
<para>
A dump/restore is not required for those running 9.4.X.
</para>
<para>
However, if your installation has been affected by the bug described in
the first changelog entry below, then after updating you may need
to take action to repair corrupted indexes.
</para>
<para>
Also, if you are upgrading from a version earlier than 9.4.10,
see <xref linkend="release-9-4-10">.
</para>
</sect2>
<sect2>
<title>Changes</title>
<itemizedlist>
<listitem>
<para>
Fix a race condition that could cause indexes built
with <command>CREATE INDEX CONCURRENTLY</> to be corrupt
(Pavan Deolasee, Tom Lane)
</para>
<para>
If <command>CREATE INDEX CONCURRENTLY</> was used to build an index
that depends on a column not previously indexed, then rows inserted
or updated by transactions that ran concurrently with
the <command>CREATE INDEX</> command could have received incorrect
index entries. If you suspect this may have happened, the most
reliable solution is to rebuild affected indexes after installing
this update.
</para>
</listitem>
<listitem>
<para>
Ensure that the special snapshot used for catalog scans is not
invalidated by premature data pruning (Tom Lane)
</para>
<para>
Backends failed to account for this snapshot when advertising their
oldest xmin, potentially allowing concurrent vacuuming operations to
remove data that was still needed. This led to transient failures
along the lines of <quote>cache lookup failed for relation 1255</>.
</para>
</listitem>
<listitem>
<para>
Unconditionally WAL-log creation of the <quote>init fork</> for an
unlogged table (Michael Paquier)
</para>
<para>
Previously, this was skipped when <xref linkend="guc-wal-level">
= <literal>minimal</>, but actually it's necessary even in that case
to ensure that the unlogged table is properly reset to empty after a
crash.
</para>
</listitem>
<listitem>
<para>
Reduce interlocking on standby servers during the replay of btree
index vacuuming operations (Simon Riggs)
</para>
<para>
This change avoids substantial replication delays that sometimes
occurred while replaying such operations.
</para>
</listitem>
<listitem>
<para>
If the stats collector dies during hot standby, restart it (Takayuki
Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Ensure that hot standby feedback works correctly when it's enabled at
standby server start (Ants Aasma, Craig Ringer)
</para>
</listitem>
<listitem>
<para>
Check for interrupts while hot standby is waiting for a conflicting
query (Simon Riggs)
</para>
</listitem>
<listitem>
<para>
Avoid constantly respawning the autovacuum launcher in a corner case
(Amit Khandekar)
</para>
<para>
This fix avoids problems when autovacuum is nominally off and there
are some tables that require freezing, but all such tables are
already being processed by autovacuum workers.
</para>
</listitem>
<listitem>
<para>
Fix check for when an extension member object can be dropped (Tom Lane)
</para>
<para>
Extension upgrade scripts should be able to drop member objects,
but this was disallowed for serial-column sequences, and possibly
other cases.
</para>
</listitem>
<listitem>
<para>
Make sure <command>ALTER TABLE</> preserves index tablespace
assignments when rebuilding indexes (Tom Lane, Michael Paquier)
</para>
<para>
Previously, non-default settings
of <xref linkend="guc-default-tablespace"> could result in broken
indexes.
</para>
</listitem>
<listitem>
<para>
Fix incorrect updating of trigger function properties when changing a
foreign-key constraint's deferrability properties with <command>ALTER
TABLE ... ALTER CONSTRAINT</> (Tom Lane)
</para>
<para>
This led to odd failures during subsequent exercise of the foreign
key, as the triggers were fired at the wrong times.
</para>
</listitem>
<listitem>
<para>
Prevent dropping a foreign-key constraint if there are pending
trigger events for the referenced relation (Tom Lane)
</para>
<para>
This avoids <quote>could not find trigger <replaceable>NNN</></quote>
or <quote>relation <replaceable>NNN</> has no triggers</quote> errors.
</para>
</listitem>
<listitem>
<para>
Fix processing of OID column when a table with OIDs is associated to
a parent with OIDs via <command>ALTER TABLE ... INHERIT</> (Amit
Langote)
</para>
<para>
The OID column should be treated the same as regular user columns in
this case, but it wasn't, leading to odd behavior in later
inheritance changes.
</para>
</listitem>
<listitem>
<para>
Fix <command>CREATE OR REPLACE VIEW</> to update the view query
before attempting to apply the new view options (Dean Rasheed)
</para>
<para>
Previously the command would fail if the new options were
inconsistent with the old view definition.
</para>
</listitem>
<listitem>
<para>
Report correct object identity during <command>ALTER TEXT SEARCH
CONFIGURATION</> (Artur Zakirov)
</para>
<para>
The wrong catalog OID was reported to extensions such as logical
decoding.
</para>
</listitem>
<listitem>
<para>
Check for serializability conflicts before reporting
constraint-violation failures (Thomas Munro)
</para>
<para>
When using serializable transaction isolation, it is desirable
that any error due to concurrent transactions should manifest
as a serialization failure, thereby cueing the application that
a retry might succeed. Unfortunately, this does not reliably
happen for duplicate-key failures caused by concurrent insertions.
This change ensures that such an error will be reported as a
serialization error if the application explicitly checked for
the presence of a conflicting key (and did not find it) earlier
in the transaction.
</para>
</listitem>
<listitem>
<para>
Prevent multicolumn expansion of <replaceable>foo</><literal>.*</> in
an <command>UPDATE</> source expression (Tom Lane)
</para>
<para>
This led to <quote>UPDATE target count mismatch --- internal
error</>. Now the syntax is understood as a whole-row variable,
as it would be in other contexts.
</para>
</listitem>
<listitem>
<para>
Ensure that column typmods are determined accurately for
multi-row <literal>VALUES</> constructs (Tom Lane)
</para>
<para>
This fixes problems occurring when the first value in a column has a
determinable typmod (e.g., length for a <type>varchar</> value) but
later values don't share the same limit.
</para>
</listitem>
<listitem>
<para>
Throw error for an unfinished Unicode surrogate pair at the end of a
Unicode string (Tom Lane)
</para>
<para>
Normally, a Unicode surrogate leading character must be followed by a
Unicode surrogate trailing character, but the check for this was
missed if the leading character was the last character in a Unicode
string literal (<literal>U&amp;'...'</>) or Unicode identifier
(<literal>U&amp;"..."</>).
</para>
</listitem>
<listitem>
<para>
Ensure that a purely negative text search query, such
as <literal>!foo</>, matches empty <type>tsvector</>s (Tom Dunstan)
</para>
<para>
Such matches were found by GIN index searches, but not by sequential
scans or GiST index searches.
</para>
</listitem>
<listitem>
<para>
Prevent crash when <function>ts_rewrite()</> replaces a non-top-level
subtree with an empty query (Artur Zakirov)
</para>
</listitem>
<listitem>
<para>
Fix performance problems in <function>ts_rewrite()</> (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>ts_rewrite()</>'s handling of nested NOT operators
(Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>array_fill()</> to handle empty arrays properly (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun in <function>quote_literal_cstr()</>
(Heikki Linnakangas)
</para>
<para>
The overrun occurred only if the input consisted entirely of single
quotes and/or backslashes.
</para>
</listitem>
<listitem>
<para>
Prevent multiple calls of <function>pg_start_backup()</>
and <function>pg_stop_backup()</> from running concurrently (Michael
Paquier)
</para>
<para>
This avoids an assertion failure, and possibly worse things, if
someone tries to run these functions in parallel.
</para>
</listitem>
<listitem>
<para>
Avoid discarding <type>interval</>-to-<type>interval</> casts
that aren't really no-ops (Tom Lane)
</para>
<para>
In some cases, a cast that should result in zeroing out
low-order <type>interval</> fields was mistakenly deemed to be a
no-op and discarded. An example is that casting from <type>INTERVAL
MONTH</> to <type>INTERVAL YEAR</> failed to clear the months field.
</para>
</listitem>
<listitem>
<para>
Ensure that cached plans are invalidated by changes in foreign-table
options (Amit Langote, Etsuro Fujita, Ashutosh Bapat)
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_dump</> to dump user-defined casts and transforms
that use built-in functions (Stephen Frost)
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_restore</> with <option>--create --if-exists</>
to behave more sanely if an archive contains
unrecognized <command>DROP</> commands (Tom Lane)
</para>
<para>
This doesn't fix any live bug, but it may improve the behavior in
future if <application>pg_restore</> is used with an archive
generated by a later <application>pg_dump</> version.
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_basebackup</>'s rate limiting in the presence of
slow I/O (Antonin Houska)
</para>
<para>
If disk I/O was transiently much slower than the specified rate
limit, the calculation overflowed, effectively disabling the rate
limit for the rest of the run.
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_basebackup</>'s handling of
symlinked <filename>pg_stat_tmp</> and <filename>pg_replslot</>
subdirectories (Magnus Hagander, Michael Paquier)
</para>
</listitem>
<listitem>
<para>
Fix possible <application>pg_basebackup</> failure on standby
server when including WAL files (Amit Kapila, Robert Haas)
</para>
</listitem>
<listitem>
<para>
Ensure that the Python exception objects we create for PL/Python are
properly reference-counted (Rafa de la Torre, Tom Lane)
</para>
<para>
This avoids failures if the objects are used after a Python garbage
collection cycle has occurred.
</para>
</listitem>
<listitem>
<para>
Fix PL/Tcl to support triggers on tables that have <literal>.tupno</>
as a column name (Tom Lane)
</para>
<para>
This matches the (previously undocumented) behavior of
PL/Tcl's <command>spi_exec</> and <command>spi_execp</> commands,
namely that a magic <literal>.tupno</> column is inserted only if
there isn't a real column named that.
</para>
</listitem>
<listitem>
<para>
Allow DOS-style line endings in <filename>~/.pgpass</> files,
even on Unix (Vik Fearing)
</para>
<para>
This change simplifies use of the same password file across Unix and
Windows machines.
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun if <application>ecpg</> is given a file
name that ends with a dot (Takayuki Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Fix <application>psql</>'s tab completion for <command>ALTER DEFAULT
PRIVILEGES</> (Gilles Darold, Stephen Frost)
</para>
</listitem>
<listitem>
<para>
In <application>psql</>, treat an empty or all-blank setting of
the <envar>PAGER</> environment variable as meaning <quote>no
pager</> (Tom Lane)
</para>
<para>
Previously, such a setting caused output intended for the pager to
vanish entirely.
</para>
</listitem>
<listitem>
<para>
Improve <filename>contrib/dblink</>'s reporting of
low-level <application>libpq</> errors, such as out-of-memory
(Joe Conway)
</para>
</listitem>
<listitem>
<para>
Teach <filename>contrib/dblink</> to ignore irrelevant server options
when it uses a <filename>contrib/postgres_fdw</> foreign server as
the source of connection options (Corey Huinker)
</para>
<para>
Previously, if the foreign server object had options that were not
also <application>libpq</> connection options, an error occurred.
</para>
</listitem>
<listitem>
<para>
On Windows, ensure that environment variable changes are propagated
to DLLs built with debug options (Christian Ullrich)
</para>
</listitem>
<listitem>
<para>
Sync our copy of the timezone library with IANA release tzcode2016j
(Tom Lane)
</para>
<para>
This fixes various issues, most notably that timezone data
installation failed if the target directory didn't support hard
links.
</para>
</listitem>
<listitem>
<para>
Update time zone data files to <application>tzdata</> release 2016j
for DST law changes in northern Cyprus (adding a new zone
Asia/Famagusta), Russia (adding a new zone Europe/Saratov), Tonga,
and Antarctica/Casey.
Historical corrections for Italy, Kazakhstan, Malta, and Palestine.
Switch to preferring numeric zone abbreviations for Tonga.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="release-9-4-10">
<title>Release 9.4.10</title>
......
doc/src/sgml/release-9.5.sgml
View file @ 64ee636a
<!-- doc/src/sgml/release-9.5.sgml -->
<!-- See header comment in release.sgml about typical markup -->
<sect1 id="release-9-5-6">
<title>Release 9.5.6</title>
<note>
<title>Release Date</title>
<simpara>2017-02-09</simpara>
</note>
<para>
This release contains a variety of fixes from 9.5.5.
For information about new features in the 9.5 major release, see
<xref linkend="release-9-5">.
</para>
<sect2>
<title>Migration to Version 9.5.6</title>
<para>
A dump/restore is not required for those running 9.5.X.
</para>
<para>
However, if your installation has been affected by the bug described in
the first changelog entry below, then after updating you may need
to take action to repair corrupted indexes.
</para>
<para>
Also, if you are upgrading from a version earlier than 9.5.5,
see <xref linkend="release-9-5-5">.
</para>
</sect2>
<sect2>
<title>Changes</title>
<itemizedlist>
<listitem>
<para>
Fix a race condition that could cause indexes built
with <command>CREATE INDEX CONCURRENTLY</> to be corrupt
(Pavan Deolasee, Tom Lane)
</para>
<para>
If <command>CREATE INDEX CONCURRENTLY</> was used to build an index
that depends on a column not previously indexed, then rows inserted
or updated by transactions that ran concurrently with
the <command>CREATE INDEX</> command could have received incorrect
index entries. If you suspect this may have happened, the most
reliable solution is to rebuild affected indexes after installing
this update.
</para>
</listitem>
<listitem>
<para>
Ensure that the special snapshot used for catalog scans is not
invalidated by premature data pruning (Tom Lane)
</para>
<para>
Backends failed to account for this snapshot when advertising their
oldest xmin, potentially allowing concurrent vacuuming operations to
remove data that was still needed. This led to transient failures
along the lines of <quote>cache lookup failed for relation 1255</>.
</para>
</listitem>
<listitem>
<para>
Fix incorrect WAL logging for BRIN indexes (Kuntal Ghosh)
</para>
<para>
The WAL record emitted for a BRIN <quote>revmap</> page when moving an
index tuple to a different page was incorrect. Replay would make the
related portion of the index useless, forcing it to be recomputed.
</para>
</listitem>
<listitem>
<para>
Unconditionally WAL-log creation of the <quote>init fork</> for an
unlogged table (Michael Paquier)
</para>
<para>
Previously, this was skipped when <xref linkend="guc-wal-level">
= <literal>minimal</>, but actually it's necessary even in that case
to ensure that the unlogged table is properly reset to empty after a
crash.
</para>
</listitem>
<listitem>
<!--
Author: Alvaro Herrera <alvherre@alvh.no-ip.org>
Branch: REL9_5_STABLE [c0db1ec26] 2016-11-17 13:31:30 -0300
Branch: REL9_4_STABLE [30e3cb307] 2016-11-17 13:31:30 -0300
-->
<para>
Reduce interlocking on standby servers during the replay of btree
index vacuuming operations (Simon Riggs)
</para>
<para>
This change avoids substantial replication delays that sometimes
occurred while replaying such operations.
</para>
</listitem>
<listitem>
<para>
If the stats collector dies during hot standby, restart it (Takayuki
Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Ensure that hot standby feedback works correctly when it's enabled at
standby server start (Ants Aasma, Craig Ringer)
</para>
</listitem>
<listitem>
<para>
Check for interrupts while hot standby is waiting for a conflicting
query (Simon Riggs)
</para>
</listitem>
<listitem>
<para>
Avoid constantly respawning the autovacuum launcher in a corner case
(Amit Khandekar)
</para>
<para>
This fix avoids problems when autovacuum is nominally off and there
are some tables that require freezing, but all such tables are
already being processed by autovacuum workers.
</para>
</listitem>
<listitem>
<para>
Fix check for when an extension member object can be dropped (Tom Lane)
</para>
<para>
Extension upgrade scripts should be able to drop member objects,
but this was disallowed for serial-column sequences, and possibly
other cases.
</para>
</listitem>
<listitem>
<para>
Make sure <command>ALTER TABLE</> preserves index tablespace
assignments when rebuilding indexes (Tom Lane, Michael Paquier)
</para>
<para>
Previously, non-default settings
of <xref linkend="guc-default-tablespace"> could result in broken
indexes.
</para>
</listitem>
<listitem>
<para>
Fix incorrect updating of trigger function properties when changing a
foreign-key constraint's deferrability properties with <command>ALTER
TABLE ... ALTER CONSTRAINT</> (Tom Lane)
</para>
<para>
This led to odd failures during subsequent exercise of the foreign
key, as the triggers were fired at the wrong times.
</para>
</listitem>
<listitem>
<para>
Prevent dropping a foreign-key constraint if there are pending
trigger events for the referenced relation (Tom Lane)
</para>
<para>
This avoids <quote>could not find trigger <replaceable>NNN</></quote>
or <quote>relation <replaceable>NNN</> has no triggers</quote> errors.
</para>
</listitem>
<listitem>
<para>
Fix <command>ALTER TABLE ... SET DATA TYPE ... USING</> when child
table has different column ordering than the parent
(&Aacute;lvaro Herrera)
</para>
<para>
Failure to adjust the column numbering in the <literal>USING</>
expression led to errors,
typically <quote>attribute <replaceable>N</> has wrong type</quote>.
</para>
</listitem>
<listitem>
<para>
Fix processing of OID column when a table with OIDs is associated to
a parent with OIDs via <command>ALTER TABLE ... INHERIT</> (Amit
Langote)
</para>
<para>
The OID column should be treated the same as regular user columns in
this case, but it wasn't, leading to odd behavior in later
inheritance changes.
</para>
</listitem>
<listitem>
<para>
Fix <command>CREATE OR REPLACE VIEW</> to update the view query
before attempting to apply the new view options (Dean Rasheed)
</para>
<para>
Previously the command would fail if the new options were
inconsistent with the old view definition.
</para>
</listitem>
<listitem>
<para>
Report correct object identity during <command>ALTER TEXT SEARCH
CONFIGURATION</> (Artur Zakirov)
</para>
<para>
The wrong catalog OID was reported to extensions such as logical
decoding.
</para>
</listitem>
<listitem>
<para>
Fix commit timestamp mechanism to not fail when queried about
the special XIDs <literal>FrozenTransactionId</>
and <literal>BootstrapTransactionId</> (Craig Ringer)
</para>
</listitem>
<listitem>
<!--
Author: Kevin Grittner <kgrittn@postgresql.org>
Branch: REL9_5_STABLE [bed2a0b06] 2016-12-13 19:14:42 -0600
Branch: REL9_4_STABLE [4b9d466c1] 2016-12-13 19:05:12 -0600
Branch: REL9_3_STABLE [5d80171ad] 2016-12-13 19:05:35 -0600
Branch: REL9_2_STABLE [60314e28e] 2016-12-13 19:08:09 -0600
-->
<para>
Check for serializability conflicts before reporting
constraint-violation failures (Thomas Munro)
</para>
<para>
When using serializable transaction isolation, it is desirable
that any error due to concurrent transactions should manifest
as a serialization failure, thereby cueing the application that
a retry might succeed. Unfortunately, this does not reliably
happen for duplicate-key failures caused by concurrent insertions.
This change ensures that such an error will be reported as a
serialization error if the application explicitly checked for
the presence of a conflicting key (and did not find it) earlier
in the transaction.
</para>
</listitem>
<listitem>
<para>
Fix incorrect use of view reloptions as regular table reloptions (Tom
Lane)
</para>
<para>
The symptom was spurious <quote>ON CONFLICT is not supported on table
... used as a catalog table</> errors when the target
of <command>INSERT ... ON CONFLICT</> is a view with cascade option.
</para>
</listitem>
<listitem>
<para>
Fix incorrect <quote>target lists can have at most <replaceable>N</>
entries</quote> complaint when using <literal>ON CONFLICT</> with
wide tables (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Prevent multicolumn expansion of <replaceable>foo</><literal>.*</> in
an <command>UPDATE</> source expression (Tom Lane)
</para>
<para>
This led to <quote>UPDATE target count mismatch --- internal
error</>. Now the syntax is understood as a whole-row variable,
as it would be in other contexts.
</para>
</listitem>
<listitem>
<para>
Ensure that column typmods are determined accurately for
multi-row <literal>VALUES</> constructs (Tom Lane)
</para>
<para>
This fixes problems occurring when the first value in a column has a
determinable typmod (e.g., length for a <type>varchar</> value) but
later values don't share the same limit.
</para>
</listitem>
<listitem>
<para>
Throw error for an unfinished Unicode surrogate pair at the end of a
Unicode string (Tom Lane)
</para>
<para>
Normally, a Unicode surrogate leading character must be followed by a
Unicode surrogate trailing character, but the check for this was
missed if the leading character was the last character in a Unicode
string literal (<literal>U&amp;'...'</>) or Unicode identifier
(<literal>U&amp;"..."</>).
</para>
</listitem>
<listitem>
<para>
Ensure that a purely negative text search query, such
as <literal>!foo</>, matches empty <type>tsvector</>s (Tom Dunstan)
</para>
<para>
Such matches were found by GIN index searches, but not by sequential
scans or GiST index searches.
</para>
</listitem>
<listitem>
<para>
Prevent crash when <function>ts_rewrite()</> replaces a non-top-level
subtree with an empty query (Artur Zakirov)
</para>
</listitem>
<listitem>
<para>
Fix performance problems in <function>ts_rewrite()</> (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>ts_rewrite()</>'s handling of nested NOT operators
(Tom Lane)
</para>
</listitem>
<listitem>
<para>
Improve speed of user-defined aggregates that
use <function>array_append()</> as transition function (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix <function>array_fill()</> to handle empty arrays properly (Tom Lane)
</para>
</listitem>
<listitem>
<para>
Fix possible crash in <function>array_position()</>
or <function>array_positions()</> when processing arrays of records
(Junseok Yang)
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun in <function>quote_literal_cstr()</>
(Heikki Linnakangas)
</para>
<para>
The overrun occurred only if the input consisted entirely of single
quotes and/or backslashes.
</para>
</listitem>
<listitem>
<para>
Prevent multiple calls of <function>pg_start_backup()</>
and <function>pg_stop_backup()</> from running concurrently (Michael
Paquier)
</para>
<para>
This avoids an assertion failure, and possibly worse things, if
someone tries to run these functions in parallel.
</para>
</listitem>
<listitem>
<para>
Disable transform that attempted to remove no-op <literal>AT TIME
ZONE</> conversions (Tom Lane)
</para>
<para>
This resulted in wrong answers when the simplified expression was
used in an index condition.
</para>
</listitem>
<listitem>
<para>
Avoid discarding <type>interval</>-to-<type>interval</> casts
that aren't really no-ops (Tom Lane)
</para>
<para>
In some cases, a cast that should result in zeroing out
low-order <type>interval</> fields was mistakenly deemed to be a
no-op and discarded. An example is that casting from <type>INTERVAL
MONTH</> to <type>INTERVAL YEAR</> failed to clear the months field.
</para>
</listitem>
<listitem>
<para>
Fix bugs in transmitting GUC parameter values to parallel workers
(Michael Paquier, Tom Lane)
</para>
</listitem>
<listitem>
<para>
Ensure that cached plans are invalidated by changes in foreign-table
options (Amit Langote, Etsuro Fujita, Ashutosh Bapat)
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_dump</> to dump user-defined casts and transforms
that use built-in functions (Stephen Frost)
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_restore</> with <option>--create --if-exists</>
to behave more sanely if an archive contains
unrecognized <command>DROP</> commands (Tom Lane)
</para>
<para>
This doesn't fix any live bug, but it may improve the behavior in
future if <application>pg_restore</> is used with an archive
generated by a later <application>pg_dump</> version.
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_basebackup</>'s rate limiting in the presence of
slow I/O (Antonin Houska)
</para>
<para>
If disk I/O was transiently much slower than the specified rate
limit, the calculation overflowed, effectively disabling the rate
limit for the rest of the run.
</para>
</listitem>
<listitem>
<para>
Fix <application>pg_basebackup</>'s handling of
symlinked <filename>pg_stat_tmp</> and <filename>pg_replslot</>
subdirectories (Magnus Hagander, Michael Paquier)
</para>
</listitem>
<listitem>
<para>
Fix possible <application>pg_basebackup</> failure on standby
server when including WAL files (Amit Kapila, Robert Haas)
</para>
</listitem>
<listitem>
<para>
Fix possible mishandling of expanded arrays in domain check
constraints and <literal>CASE</> execution (Tom Lane)
</para>
<para>
It was possible for a PL/pgSQL function invoked in these contexts to
modify or even delete an array value that needs to be preserved for
additional operations.
</para>
</listitem>
<listitem>
<para>
Fix nested uses of PL/pgSQL functions in contexts such as domain
check constraints evaluated during assignment to a PL/pgSQL variable
(Tom Lane)
</para>
</listitem>
<listitem>
<para>
Ensure that the Python exception objects we create for PL/Python are
properly reference-counted (Rafa de la Torre, Tom Lane)
</para>
<para>
This avoids failures if the objects are used after a Python garbage
collection cycle has occurred.
</para>
</listitem>
<listitem>
<para>
Fix PL/Tcl to support triggers on tables that have <literal>.tupno</>
as a column name (Tom Lane)
</para>
<para>
This matches the (previously undocumented) behavior of
PL/Tcl's <command>spi_exec</> and <command>spi_execp</> commands,
namely that a magic <literal>.tupno</> column is inserted only if
there isn't a real column named that.
</para>
</listitem>
<listitem>
<para>
Allow DOS-style line endings in <filename>~/.pgpass</> files,
even on Unix (Vik Fearing)
</para>
<para>
This change simplifies use of the same password file across Unix and
Windows machines.
</para>
</listitem>
<listitem>
<para>
Fix one-byte buffer overrun if <application>ecpg</> is given a file
name that ends with a dot (Takayuki Tsunakawa)
</para>
</listitem>
<listitem>
<para>
Fix <application>psql</>'s tab completion for <command>ALTER DEFAULT
PRIVILEGES</> (Gilles Darold, Stephen Frost)
</para>
</listitem>
<listitem>
<para>
In <application>psql</>, treat an empty or all-blank setting of
the <envar>PAGER</> environment variable as meaning <quote>no
pager</> (Tom Lane)
</para>
<para>
Previously, such a setting caused output intended for the pager to
vanish entirely.
</para>
</listitem>
<listitem>
<para>
Improve <filename>contrib/dblink</>'s reporting of
low-level <application>libpq</> errors, such as out-of-memory
(Joe Conway)
</para>
</listitem>
<listitem>
<para>
Teach <filename>contrib/dblink</> to ignore irrelevant server options
when it uses a <filename>contrib/postgres_fdw</> foreign server as
the source of connection options (Corey Huinker)
</para>
<para>
Previously, if the foreign server object had options that were not
also <application>libpq</> connection options, an error occurred.
</para>
</listitem>
<listitem>
<para>
Fix portability problems in <filename>contrib/pageinspect</>'s
functions for GIN indexes (Peter Eisentraut, Tom Lane)
</para>
</listitem>
<listitem>
<para>
On Windows, ensure that environment variable changes are propagated
to DLLs built with debug options (Christian Ullrich)
</para>
</listitem>
<listitem>
<para>
Sync our copy of the timezone library with IANA release tzcode2016j
(Tom Lane)
</para>
<para>
This fixes various issues, most notably that timezone data
installation failed if the target directory didn't support hard
links.
</para>
</listitem>
<listitem>
<para>
Update time zone data files to <application>tzdata</> release 2016j
for DST law changes in northern Cyprus (adding a new zone
Asia/Famagusta), Russia (adding a new zone Europe/Saratov), Tonga,
and Antarctica/Casey.
Historical corrections for Italy, Kazakhstan, Malta, and Palestine.
Switch to preferring numeric zone abbreviations for Tonga.
</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
<sect1 id="release-9-5-5">
<title>Release 9.5.5</title>
......@@ -64,7 +726,7 @@
<listitem>
<!--
zAuthor: Tom Lane <tgl@sss.pgh.pa.us>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Branch: master [60893786d] 2016-09-03 13:28:53 -0400
Branch: REL9_6_STABLE Release: REL9_6_0 [36646d3af] 2016-09-03 13:28:53 -0400
Branch: REL9_5_STABLE [08a72872f] 2016-09-03 13:28:53 -0400
......
doc/src/sgml/release-9.6.sgml
View file @ 64ee636a
......@@ -130,39 +130,6 @@ Branch: REL9_2_STABLE [a00ac6299] 2016-12-08 14:19:25 -0500
<listitem>
<!--
Author: Fujii Masao <fujii@postgresql.org>
Branch: REL9_2_STABLE [38bec1805] 2017-01-25 07:02:25 +0900
-->
<para>
Fix WAL page header validation when re-reading segments (Takayuki
Tsunakawa, Amit Kapila)
</para>
<para>
In corner cases, a spurious <quote>out-of-sequence TLI</> error
could be reported during recovery.
</para>
</listitem>
<listitem>
<!--
Author: Alvaro Herrera <alvherre@alvh.no-ip.org>
Branch: REL9_5_STABLE [c0db1ec26] 2016-11-17 13:31:30 -0300
Branch: REL9_4_STABLE [30e3cb307] 2016-11-17 13:31:30 -0300
-->
<para>
Reduce interlocking on standby servers during the replay of btree
index vacuuming operations (Simon Riggs)
</para>
<para>
This change avoids substantial replication delays that sometimes
occurred while replaying such operations.
</para>
</listitem>
<listitem>
<!--
Author: Robert Haas <rhaas@postgresql.org>
Branch: master [4f714b2fd] 2016-10-27 14:27:40 -0400
Branch: REL9_6_STABLE [4a43a6244] 2016-10-27 14:54:35 -0400
......@@ -180,6 +147,7 @@ Branch: REL9_2_STABLE [2be2838a7] 2016-10-27 14:56:53 -0400
<listitem>
<!--
Author: Simon Riggs <simon@2ndQuadrant.com>
Branch: master [ec4b97501] 2017-01-26 18:14:02 +0000
Branch: REL9_6_STABLE [95d1b4145] 2017-01-26 20:06:44 +0000
Branch: REL9_5_STABLE [99289e506] 2017-01-26 20:09:18 +0000
Branch: REL9_4_STABLE [800d89a98] 2017-01-26 20:10:19 +0000
......@@ -473,32 +441,6 @@ Branch: REL9_5_STABLE [7816d1356] 2016-11-24 15:39:55 -0300
<listitem>
<!--
Author: Kevin Grittner <kgrittn@postgresql.org>
Branch: REL9_5_STABLE [bed2a0b06] 2016-12-13 19:14:42 -0600
Branch: REL9_4_STABLE [4b9d466c1] 2016-12-13 19:05:12 -0600
Branch: REL9_3_STABLE [5d80171ad] 2016-12-13 19:05:35 -0600
Branch: REL9_2_STABLE [60314e28e] 2016-12-13 19:08:09 -0600
-->
<para>
Check for serializability conflicts before reporting
constraint-violation failures (Thomas Munro)
</para>
<para>
When using serializable transaction isolation, it is desirable
that any error due to concurrent transactions should manifest
as a serialization failure, thereby cueing the application that
a retry might succeed. Unfortunately, this does not reliably
happen for duplicate-key failures caused by concurrent insertions.
This change ensures that such an error will be reported as a
serialization error if the application explicitly checked for
the presence of a conflicting key (and did not find it) earlier
in the transaction.
</para>
</listitem>
<listitem>
<!--
Author: Tom Lane <tgl@sss.pgh.pa.us>
Branch: master [e3e66d8a9] 2016-11-07 12:08:18 -0500
Branch: REL9_6_STABLE [5ee3a7453] 2016-11-07 12:08:19 -0500
......@@ -570,6 +512,7 @@ Branch: REL9_3_STABLE [71db302ec] 2016-11-20 14:26:19 -0500
<listitem>
<!--
Author: Tom Lane <tgl@sss.pgh.pa.us>
Branch: master [0b78106cd] 2016-12-08 11:40:02 -0500
Branch: REL9_6_STABLE [cf22c8cb8] 2016-12-09 12:01:14 -0500
Branch: REL9_5_STABLE [6a493adda] 2016-12-09 12:01:14 -0500
Branch: REL9_4_STABLE [c7a62135a] 2016-12-09 12:01:14 -0500
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment