Skip to content

P
Postgres FD Implementation
Commit 05102c75 authored by Bruce Momjian's avatar Bruce Momjian
Browse files
Options

Here are 3 patches (all relative to the src directory) to help with 

the configuration of v6.3.1.  I have replaced the queries for
include/lib directories with --with configuration options.  I have
also included a list of potential tcl/tk include directories directly
in the CPPFLAGS variable.  As new versions are needed, these should
be added to the list in reverse numerical order (libraries are in
a separate list near the end).  This greatly simplifies the later
checks if --with-tcl is set.  I hope this solution works for
everyone.

I also added a check to disable the perl support if postgres was
not already installed (as per the instructions in the directory).
By the way, why must there be an installed pgsql to compile perl
support? This seems odd, at best.

Finally, I changed the Makefile in the libpgtcl interface to place
the shared libraries at the end of the list of files, not at the
beginning.  With NetBSD at least, libraries are linked in order,
so the original sequence does not work.

Brook Milligan
parent 7a9385e9
Hide whitespace changes
Inline Side-by-side
Showing with 486 additions and 416 deletions
INSTALL
View file @ 05102c75
......@@ -276,15 +276,22 @@ PostgreSQL:
listens for incoming connections on. The
default for this is port 5432.
--with-defaults Use default responses to several queries during
configuration.
--with-tcl Enables programs requiring Tcl/Tk and X11,
including pgtclsh and libpgtcl.
--with-perl Enables the perl interface. Note that this
requires an installed version of postgreSQL.
--with-includes=DIRS
Include DIRS in list of directories searched
for header files. (Typical use will need
--with-includes=/usr/local/include)
--with-libraries=DIRS
Include DIRS in list of directories searched
for archive libraries. (Typical use will need
--with-libraries=/usr/local/lib)
As an example, here is the configure script I use on a Sparc
Solaris 2.5 system with /opt/postgres being the install base.
......
src/configure
View file @ 05102c75
......@@ -12,6 +12,10 @@ ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_default_prefix=/usr/local/pgsql
ac_help="$ac_help
--with-includes=DIR site header files for tk/tcl, etc in DIR"
ac_help="$ac_help
--with-libraries=DIR site library directories for tk/tcl, etc in DIR"
ac_help="$ac_help
--enable-locale enable locale support "
ac_help="$ac_help
......@@ -561,7 +565,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:565: checking host system type" >&5
echo "configure:569: checking host system type" >&5
host_alias=$host
case "$host_alias" in
......@@ -717,63 +721,56 @@ CC=`grep '^CC:' $TEMPLATE | awk -F: '{print $2}'`
LIBS=`grep '^LIBS:' $TEMPLATE | awk -F: '{print $2}'`
echo "**************************************************************"
echo "We now need to know if your compiler needs to search any
echo "additional directories for include or library files. If
echo "you don't know the answers to these questions, then just
echo "hit enter and we will try and figure it out. If things
echo "don't compile because of missing libraries or include
echo "files, then you probably need to enter something here.
echo "enter 'none' or new directories to override default"
echo ""
$ECHO_N "Additional directories to search for include files { $SRCH_INC }: $ECHO_C"
if test "X$with_defaults" = "Xyes"
then
a=$SRCH_INC
echo ""
else
read a
# Check whether --with-includes or --without-includes was given.
if test "${with_includes+set}" = set; then
withval="$with_includes"
case "$withval" in
"" | y | ye | yes | n | no)
{ echo "configure: error: *** You must supply an argument to the --with-includes option." 1>&2; exit 1; }
;;
esac
INCLUDE_DIRS="$withval"
fi
if test "$a." = "none."
then
SRCH_INC=
CPPFLAGS=
else
if test "$a." = "."
then
a=$SRCH_INC
fi
CPPFLAGS=`echo "$a" | sed 's@ *@ @g; s@^\([^ ]\)@-I\1@; s@ \([^ ]\)@ -I\1@g'`
if test "$INCLUDE_DIRS"; then
for dir in $INCLUDE_DIRS; do
if test -d "$dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir"
else
echo "configure: warning: *** Include directory $dir does not exist." 1>&2
fi
done
fi
export CPPFLAGS
echo "- setting CPPFLAGS=$CPPFLAGS"
$ECHO_N "Additional directories to search for library files { $SRCH_LIB }: $ECHO_C"
if test "X$with_defaults" = "Xyes"
then
a=$SRCH_LIB
echo ""
else
read a
# Check whether --with-libraries or --without-libraries was given.
if test "${with_libraries+set}" = set; then
withval="$with_libraries"
case "$withval" in
"" | y | ye | yes | n | no)
{ echo "configure: error: *** You must supply an argument to the --with-libraries option." 1>&2; exit 1; }
;;
esac
LIBRARY_DIRS="$withval"
fi
if test "$a." = "none."
then
SRCH_LIB=
LDFLAGS=
else
if test "$a." = "."
then
a=$SRCH_LIB
fi
LDFLAGS=`echo "$a" | sed 's@ *@ @g; s@^\([^ ]\)@-L\1@; s@ \([^ ]\)@ -L\1@g'`
if test "$LIBRARY_DIRS"; then
for dir in $withval; do
if test -d "$dir"; then
PGSQL_LDFLAGS="$PGSQL_LDFLAGS -L$dir"
else
echo "configure: warning: *** Library directory $dir does not exist." 1>&2
fi
done
fi
export LDFLAGS
echo "- setting LDFLAGS=$LDFLAGS"
echo $ac_n "checking setting USE_LOCALE""... $ac_c" 1>&6
echo "configure:777: checking setting USE_LOCALE" >&5
echo "configure:774: checking setting USE_LOCALE" >&5
# Check whether --enable-locale or --disable-locale was given.
if test "${enable_locale+set}" = set; then
enableval="$enable_locale"
......@@ -788,7 +785,7 @@ fi
echo $ac_n "checking setting CYR_RECODE""... $ac_c" 1>&6
echo "configure:792: checking setting CYR_RECODE" >&5
echo "configure:789: checking setting CYR_RECODE" >&5
# Check whether --enable-recode or --disable-recode was given.
if test "${enable_recode+set}" = set; then
enableval="$enable_recode"
......@@ -803,7 +800,7 @@ fi
echo $ac_n "checking setting DEF_PGPORT""... $ac_c" 1>&6
echo "configure:807: checking setting DEF_PGPORT" >&5
echo "configure:804: checking setting DEF_PGPORT" >&5
# Check whether --with-pgport or --without-pgport was given.
if test "${with_pgport+set}" = set; then
withval="$with_pgport"
......@@ -821,7 +818,7 @@ fi
echo $ac_n "checking setting USE_TCL""... $ac_c" 1>&6
echo "configure:825: checking setting USE_TCL" >&5
echo "configure:822: checking setting USE_TCL" >&5
# Check whether --with-tcl or --without-tcl was given.
if test "${with_tcl+set}" = set; then
withval="$with_tcl"
......@@ -831,11 +828,31 @@ else
fi
if test "$USE_TCL"; then
header_dirs="/usr/include $INCLUDE_DIRS"
tcl_dirs="tcl8.0 tcl80 tcl7.6 tcl76"
tk_dirs="tk8.0 tk4.2"
for dir in $header_dirs; do
for tcl_dir in $tcl_dirs; do
if test -d "$dir/$tcl_dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir/$tcl_dir"
fi
done
done
for dir in $header_dirs; do
for tk_dir in $tk_dirs; do
if test -d "$dir/$tk_dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir/$tk_dir"
fi
done
done
fi
export USE_TCL
USE_X=$USE_TCL
echo $ac_n "checking setting USE_PERL""... $ac_c" 1>&6
echo "configure:839: checking setting USE_PERL" >&5
echo "configure:856: checking setting USE_PERL" >&5
# Check whether --with-perl or --without-perl was given.
if test "${with_perl+set}" = set; then
withval="$with_perl"
......@@ -845,10 +862,17 @@ else
fi
if test "$USE_PERL" = "true"; then
if test ! -x $prefix/bin/postgres; then
echo "configure: warning: perl support disabled; postgres not previously installed" 1>&2
USE_PERL=
fi
fi
export USE_PERL
echo $ac_n "checking setting ASSERT CHECKING""... $ac_c" 1>&6
echo "configure:852: checking setting ASSERT CHECKING" >&5
echo "configure:876: checking setting ASSERT CHECKING" >&5
# Check whether --enable-cassert or --disable-cassert was given.
if test "${enable_cassert+set}" = set; then
enableval="$enable_cassert"
......@@ -869,7 +893,7 @@ else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:873: checking for $ac_word" >&5
echo "configure:897: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -898,7 +922,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:902: checking for $ac_word" >&5
echo "configure:926: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -946,7 +970,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
......@@ -956,11 +980,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
#line 960 "configure"
#line 984 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
......@@ -980,12 +1004,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:984: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:989: checking whether we are using GNU C" >&5
echo "configure:1013: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -994,7 +1018,7 @@ else
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
......@@ -1009,7 +1033,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1013: checking whether ${CC-cc} accepts -g" >&5
echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1038,11 +1062,18 @@ fi
fi
CPPFLAGS="$CPPFLAGS $PGSQL_CPPFLAGS"
export CPPFLAGS
echo "- setting CPPFLAGS=$CPPFLAGS"
LDFLAGS="$LDFLAGS $PGSQL_LDFLAGS"
export LDFLAGS
echo "- setting LDFLAGS=$LDFLAGS"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1046: checking how to run the C preprocessor" >&5
echo "configure:1077: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
......@@ -1057,13 +1088,13 @@ else
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1061 "configure"
#line 1092 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:1098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
......@@ -1074,13 +1105,13 @@ else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 1078 "configure"
#line 1109 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:1115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
......@@ -1122,7 +1153,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1126: checking for $ac_word" >&5
echo "configure:1157: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_INSTALL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1196,7 +1227,7 @@ fi
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1200: checking for $ac_word" >&5
echo "configure:1231: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1229,7 +1260,7 @@ then
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
echo "configure:1233: checking for yywrap in -l$ac_lib" >&5
echo "configure:1264: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1237,7 +1268,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1241 "configure"
#line 1272 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -1248,7 +1279,7 @@ int main() {
yywrap()
; return 0; }
EOF
if { (eval echo configure:1252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1271,7 +1302,7 @@ fi
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1275: checking whether ln -s works" >&5
echo "configure:1306: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1292,7 +1323,7 @@ else
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1296: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo "configure:1327: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1321,7 +1352,7 @@ fi
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1325: checking for $ac_word" >&5
echo "configure:1356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1350,7 +1381,7 @@ fi
# Extract the first word of "find", so it can be a program name with args.
set dummy find; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1354: checking for $ac_word" >&5
echo "configure:1385: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_find'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1381,7 +1412,7 @@ fi
# Extract the first word of "tar", so it can be a program name with args.
set dummy tar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1385: checking for $ac_word" >&5
echo "configure:1416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_tar'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1412,7 +1443,7 @@ fi
# Extract the first word of "split", so it can be a program name with args.
set dummy split; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1416: checking for $ac_word" >&5
echo "configure:1447: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_split'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1443,7 +1474,7 @@ fi
# Extract the first word of "etags", so it can be a program name with args.
set dummy etags; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1447: checking for $ac_word" >&5
echo "configure:1478: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_etags'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1474,7 +1505,7 @@ fi
# Extract the first word of "xargs", so it can be a program name with args.
set dummy xargs; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1478: checking for $ac_word" >&5
echo "configure:1509: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_xargs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1505,7 +1536,7 @@ fi
# Extract the first word of "ipcs", so it can be a program name with args.
set dummy ipcs; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1509: checking for $ac_word" >&5
echo "configure:1540: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ipcs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1536,7 +1567,7 @@ fi
# Extract the first word of "ipcrm", so it can be a program name with args.
set dummy ipcrm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1540: checking for $ac_word" >&5
echo "configure:1571: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_ipcrm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1569,7 +1600,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1573: checking for $ac_word" >&5
echo "configure:1604: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1620,7 +1651,7 @@ fi
# Extract the first word of "yacc", so it can be a program name with args.
set dummy yacc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1624: checking for $ac_word" >&5
echo "configure:1655: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_yacc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1651,7 +1682,7 @@ fi
# Extract the first word of "bison", so it can be a program name with args.
set dummy bison; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1655: checking for $ac_word" >&5
echo "configure:1686: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_bison'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -1695,7 +1726,7 @@ else
fi
echo $ac_n "checking for main in -lcurses""... $ac_c" 1>&6
echo "configure:1699: checking for main in -lcurses" >&5
echo "configure:1730: checking for main in -lcurses" >&5
ac_lib_var=`echo curses'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1703,14 +1734,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcurses $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1707 "configure"
#line 1738 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1738,7 +1769,7 @@ else
fi
echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6
echo "configure:1742: checking for main in -ltermcap" >&5
echo "configure:1773: checking for main in -ltermcap" >&5
ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1746,14 +1777,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1750 "configure"
#line 1781 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1781,7 +1812,7 @@ else
fi
echo $ac_n "checking for main in -lhistory""... $ac_c" 1>&6
echo "configure:1785: checking for main in -lhistory" >&5
echo "configure:1816: checking for main in -lhistory" >&5
ac_lib_var=`echo history'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1789,14 +1820,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lhistory $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1793 "configure"
#line 1824 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1824,7 +1855,7 @@ else
fi
echo $ac_n "checking for main in -lreadline""... $ac_c" 1>&6
echo "configure:1828: checking for main in -lreadline" >&5
echo "configure:1859: checking for main in -lreadline" >&5
ac_lib_var=`echo readline'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1832,14 +1863,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1836 "configure"
#line 1867 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1867,7 +1898,7 @@ else
fi
echo $ac_n "checking for write_history in -lreadline""... $ac_c" 1>&6
echo "configure:1871: checking for write_history in -lreadline" >&5
echo "configure:1902: checking for write_history in -lreadline" >&5
ac_lib_var=`echo readline'_'write_history | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1875,7 +1906,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1879 "configure"
#line 1910 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -1886,7 +1917,7 @@ int main() {
write_history()
; return 0; }
EOF
if { (eval echo configure:1890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1912,7 +1943,7 @@ fi
if test "$PORTNAME" != "aix" -a "$PORTNAME" != "alpha"
then
echo $ac_n "checking for main in -lbsd""... $ac_c" 1>&6
echo "configure:1916: checking for main in -lbsd" >&5
echo "configure:1947: checking for main in -lbsd" >&5
ac_lib_var=`echo bsd'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1920,14 +1951,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lbsd $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1924 "configure"
#line 1955 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:1962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1956,7 +1987,7 @@ fi
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
echo "configure:1960: checking for main in -lm" >&5
echo "configure:1991: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -1964,14 +1995,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1968 "configure"
#line 1999 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -1999,7 +2030,7 @@ else
fi
echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
echo "configure:2003: checking for main in -ldl" >&5
echo "configure:2034: checking for main in -ldl" >&5
ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2007,14 +2038,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2011 "configure"
#line 2042 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2042,7 +2073,7 @@ else
fi
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
echo "configure:2046: checking for main in -lsocket" >&5
echo "configure:2077: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2050,14 +2081,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2054 "configure"
#line 2085 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2085,7 +2116,7 @@ else
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
echo "configure:2089: checking for main in -lnsl" >&5
echo "configure:2120: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2093,14 +2124,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2097 "configure"
#line 2128 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2128,7 +2159,7 @@ else
fi
echo $ac_n "checking for main in -lipc""... $ac_c" 1>&6
echo "configure:2132: checking for main in -lipc" >&5
echo "configure:2163: checking for main in -lipc" >&5
ac_lib_var=`echo ipc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2136,14 +2167,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2140 "configure"
#line 2171 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2171,7 +2202,7 @@ else
fi
echo $ac_n "checking for main in -lIPC""... $ac_c" 1>&6
echo "configure:2175: checking for main in -lIPC" >&5
echo "configure:2206: checking for main in -lIPC" >&5
ac_lib_var=`echo IPC'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2179,14 +2210,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lIPC $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2183 "configure"
#line 2214 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2221: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2214,7 +2245,7 @@ else
fi
echo $ac_n "checking for main in -llc""... $ac_c" 1>&6
echo "configure:2218: checking for main in -llc" >&5
echo "configure:2249: checking for main in -llc" >&5
ac_lib_var=`echo lc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2222,14 +2253,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-llc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2226 "configure"
#line 2257 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2257,7 +2288,7 @@ else
fi
echo $ac_n "checking for main in -ldld""... $ac_c" 1>&6
echo "configure:2261: checking for main in -ldld" >&5
echo "configure:2292: checking for main in -ldld" >&5
ac_lib_var=`echo dld'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2265,14 +2296,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2269 "configure"
#line 2300 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2300,7 +2331,7 @@ else
fi
echo $ac_n "checking for main in -lln""... $ac_c" 1>&6
echo "configure:2304: checking for main in -lln" >&5
echo "configure:2335: checking for main in -lln" >&5
ac_lib_var=`echo ln'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2308,14 +2339,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lln $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2312 "configure"
#line 2343 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2343,7 +2374,7 @@ else
fi
echo $ac_n "checking for main in -lld""... $ac_c" 1>&6
echo "configure:2347: checking for main in -lld" >&5
echo "configure:2378: checking for main in -lld" >&5
ac_lib_var=`echo ld'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2351,14 +2382,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lld $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2355 "configure"
#line 2386 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2386,7 +2417,7 @@ else
fi
echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6
echo "configure:2390: checking for main in -lcompat" >&5
echo "configure:2421: checking for main in -lcompat" >&5
ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2394,14 +2425,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcompat $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2398 "configure"
#line 2429 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2429,7 +2460,7 @@ else
fi
echo $ac_n "checking for main in -lBSD""... $ac_c" 1>&6
echo "configure:2433: checking for main in -lBSD" >&5
echo "configure:2464: checking for main in -lBSD" >&5
ac_lib_var=`echo BSD'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2437,14 +2468,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lBSD $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2441 "configure"
#line 2472 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2472,7 +2503,7 @@ else
fi
echo $ac_n "checking for main in -lcrypt""... $ac_c" 1>&6
echo "configure:2476: checking for main in -lcrypt" >&5
echo "configure:2507: checking for main in -lcrypt" >&5
ac_lib_var=`echo crypt'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2480,14 +2511,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2484 "configure"
#line 2515 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2491: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2515,7 +2546,7 @@ else
fi
echo $ac_n "checking for main in -lgen""... $ac_c" 1>&6
echo "configure:2519: checking for main in -lgen" >&5
echo "configure:2550: checking for main in -lgen" >&5
ac_lib_var=`echo gen'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2523,14 +2554,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2527 "configure"
#line 2558 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2558,7 +2589,7 @@ else
fi
echo $ac_n "checking for main in -lPW""... $ac_c" 1>&6
echo "configure:2562: checking for main in -lPW" >&5
echo "configure:2593: checking for main in -lPW" >&5
ac_lib_var=`echo PW'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -2566,14 +2597,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lPW $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2570 "configure"
#line 2601 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:2608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -2602,12 +2633,12 @@ fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:2606: checking for ANSI C header files" >&5
echo "configure:2637: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2611 "configure"
#line 2642 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
......@@ -2615,7 +2646,7 @@ else
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2619: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2632,7 +2663,7 @@ rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2636 "configure"
#line 2667 "configure"
#include "confdefs.h"
#include <string.h>
EOF
......@@ -2650,7 +2681,7 @@ fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2654 "configure"
#line 2685 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
......@@ -2671,7 +2702,7 @@ if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2675 "configure"
#line 2706 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
......@@ -2682,7 +2713,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
if { (eval echo configure:2686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
if { (eval echo configure:2717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
......@@ -2706,12 +2737,12 @@ EOF
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
echo "configure:2710: checking for sys/wait.h that is POSIX.1 compatible" >&5
echo "configure:2741: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2715 "configure"
#line 2746 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
......@@ -2727,7 +2758,7 @@ wait (&s);
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
if { (eval echo configure:2731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:2762: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
......@@ -2751,17 +2782,17 @@ for ac_hdr in limits.h unistd.h termios.h values.h sys/select.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2755: checking for $ac_hdr" >&5
echo "configure:2786: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2760 "configure"
#line 2791 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2791,17 +2822,17 @@ for ac_hdr in sys/resource.h netdb.h arpa/inet.h getopt.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2795: checking for $ac_hdr" >&5
echo "configure:2826: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2800 "configure"
#line 2831 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2805: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2831,17 +2862,17 @@ for ac_hdr in readline.h history.h dld.h crypt.h endian.h float.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2835: checking for $ac_hdr" >&5
echo "configure:2866: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2840 "configure"
#line 2871 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2871,17 +2902,17 @@ for ac_hdr in readline/history.h ieeefp.h fp_class.h netinet/in.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2875: checking for $ac_hdr" >&5
echo "configure:2906: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2880 "configure"
#line 2911 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2911,17 +2942,17 @@ for ac_hdr in string.h strings.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:2915: checking for $ac_hdr" >&5
echo "configure:2946: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2920 "configure"
#line 2951 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2925: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -2949,12 +2980,12 @@ done
echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:2953: checking for working const" >&5
echo "configure:2984: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2958 "configure"
#line 2989 "configure"
#include "confdefs.h"
int main() {
......@@ -3003,7 +3034,7 @@ ccp = (char const *const *) p;
; return 0; }
EOF
if { (eval echo configure:3007: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:3038: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
......@@ -3024,12 +3055,12 @@ EOF
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
echo "configure:3028: checking for uid_t in sys/types.h" >&5
echo "configure:3059: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3033 "configure"
#line 3064 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
......@@ -3058,21 +3089,21 @@ EOF
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
echo "configure:3062: checking for inline" >&5
echo "configure:3093: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
#line 3069 "configure"
#line 3100 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
if { (eval echo configure:3076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:3107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
......@@ -3098,12 +3129,12 @@ EOF
esac
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
echo "configure:3102: checking for mode_t" >&5
echo "configure:3133: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3107 "configure"
#line 3138 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
......@@ -3131,12 +3162,12 @@ EOF
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
echo "configure:3135: checking for off_t" >&5
echo "configure:3166: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3140 "configure"
#line 3171 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
......@@ -3164,12 +3195,12 @@ EOF
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
echo "configure:3168: checking for size_t" >&5
echo "configure:3199: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3173 "configure"
#line 3204 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
......@@ -3197,12 +3228,12 @@ EOF
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
echo "configure:3201: checking whether time.h and sys/time.h may both be included" >&5
echo "configure:3232: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3206 "configure"
#line 3237 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
......@@ -3211,7 +3242,7 @@ int main() {
struct tm *tp;
; return 0; }
EOF
if { (eval echo configure:3215: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:3246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
......@@ -3232,12 +3263,12 @@ EOF
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
echo "configure:3236: checking whether struct tm is in sys/time.h or time.h" >&5
echo "configure:3267: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3241 "configure"
#line 3272 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
......@@ -3245,7 +3276,7 @@ int main() {
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
if { (eval echo configure:3249: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:3280: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
......@@ -3267,16 +3298,16 @@ fi
echo $ac_n "checking for int timezone""... $ac_c" 1>&6
echo "configure:3271: checking for int timezone" >&5
echo "configure:3302: checking for int timezone" >&5
cat > conftest.$ac_ext <<EOF
#line 3273 "configure"
#line 3304 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
int res = timezone / 60;
; return 0; }
EOF
if { (eval echo configure:3280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_INT_TIMEZONE 1
......@@ -3291,16 +3322,16 @@ fi
rm -f conftest*
echo $ac_n "checking for gettimeofday args""... $ac_c" 1>&6
echo "configure:3295: checking for gettimeofday args" >&5
echo "configure:3326: checking for gettimeofday args" >&5
cat > conftest.$ac_ext <<EOF
#line 3297 "configure"
#line 3328 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
struct timeval *tp; struct timezone *tzp; gettimeofday(tp,tzp);
; return 0; }
EOF
if { (eval echo configure:3304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_GETTIMEOFDAY_2_ARGS 1
......@@ -3315,9 +3346,9 @@ fi
rm -f conftest*
echo $ac_n "checking for union semun""... $ac_c" 1>&6
echo "configure:3319: checking for union semun" >&5
echo "configure:3350: checking for union semun" >&5
cat > conftest.$ac_ext <<EOF
#line 3321 "configure"
#line 3352 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/ipc.h>
......@@ -3326,7 +3357,7 @@ int main() {
union semun semun;
; return 0; }
EOF
if { (eval echo configure:3330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_UNION_SEMUN 1
......@@ -3342,13 +3373,13 @@ rm -f conftest*
if test $ac_cv_prog_gcc = yes; then
echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
echo "configure:3346: checking whether ${CC-cc} needs -traditional" >&5
echo "configure:3377: checking whether ${CC-cc} needs -traditional" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_pattern="Autoconf.*'x'"
cat > conftest.$ac_ext <<EOF
#line 3352 "configure"
#line 3383 "configure"
#include "confdefs.h"
#include <sgtty.h>
Autoconf TIOCGETP
......@@ -3366,7 +3397,7 @@ rm -f conftest*
if test $ac_cv_prog_gcc_traditional = no; then
cat > conftest.$ac_ext <<EOF
#line 3370 "configure"
#line 3401 "configure"
#include "confdefs.h"
#include <termio.h>
Autoconf TCGETA
......@@ -3388,7 +3419,7 @@ echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
fi
echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
echo "configure:3392: checking for 8-bit clean memcmp" >&5
echo "configure:3423: checking for 8-bit clean memcmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
......@@ -3396,7 +3427,7 @@ else
ac_cv_func_memcmp_clean=no
else
cat > conftest.$ac_ext <<EOF
#line 3400 "configure"
#line 3431 "configure"
#include "confdefs.h"
main()
......@@ -3406,7 +3437,7 @@ main()
}
EOF
if { (eval echo configure:3410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
if { (eval echo configure:3441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_memcmp_clean=yes
else
......@@ -3424,12 +3455,12 @@ echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.o"
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:3428: checking return type of signal handlers" >&5
echo "configure:3459: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3433 "configure"
#line 3464 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
......@@ -3446,7 +3477,7 @@ int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:3450: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if { (eval echo configure:3481: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
......@@ -3465,12 +3496,12 @@ EOF
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
echo "configure:3469: checking for vprintf" >&5
echo "configure:3500: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3474 "configure"
#line 3505 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
......@@ -3493,7 +3524,7 @@ vprintf();
; return 0; }
EOF
if { (eval echo configure:3497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
......@@ -3517,12 +3548,12 @@ fi
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
echo "configure:3521: checking for _doprnt" >&5
echo "configure:3552: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3526 "configure"
#line 3557 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
......@@ -3545,7 +3576,7 @@ _doprnt();
; return 0; }
EOF
if { (eval echo configure:3549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
......@@ -3572,12 +3603,12 @@ fi
for ac_func in tzset vfork memmove sigsetjmp kill sysconf fpclass
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3576: checking for $ac_func" >&5
echo "configure:3607: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3581 "configure"
#line 3612 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -3600,7 +3631,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:3604: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -3627,12 +3658,12 @@ done
for ac_func in fp_class fp_class_d class
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3631: checking for $ac_func" >&5
echo "configure:3662: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3636 "configure"
#line 3667 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -3655,7 +3686,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:3659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -3682,12 +3713,12 @@ done
for ac_func in sigprocmask waitpid setsid fcvt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3686: checking for $ac_func" >&5
echo "configure:3717: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3691 "configure"
#line 3722 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
......@@ -3710,7 +3741,7 @@ $ac_func();
; return 0; }
EOF
if { (eval echo configure:3714: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
......@@ -3735,12 +3766,12 @@ fi
done
echo $ac_n "checking for isinf""... $ac_c" 1>&6
echo "configure:3739: checking for isinf" >&5
echo "configure:3770: checking for isinf" >&5
if eval "test \"`echo '$''{'ac_cv_func_isinf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3744 "configure"
#line 3775 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char isinf(); below. */
......@@ -3763,7 +3794,7 @@ isinf();
; return 0; }
EOF
if { (eval echo configure:3767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3798: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_isinf=yes"
else
......@@ -3788,12 +3819,12 @@ fi
echo $ac_n "checking for getrusage""... $ac_c" 1>&6
echo "configure:3792: checking for getrusage" >&5
echo "configure:3823: checking for getrusage" >&5
if eval "test \"`echo '$''{'ac_cv_func_getrusage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3797 "configure"
#line 3828 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char getrusage(); below. */
......@@ -3816,7 +3847,7 @@ getrusage();
; return 0; }
EOF
if { (eval echo configure:3820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_getrusage=yes"
else
......@@ -3841,12 +3872,12 @@ fi
echo $ac_n "checking for srandom""... $ac_c" 1>&6
echo "configure:3845: checking for srandom" >&5
echo "configure:3876: checking for srandom" >&5
if eval "test \"`echo '$''{'ac_cv_func_srandom'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3850 "configure"
#line 3881 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char srandom(); below. */
......@@ -3869,7 +3900,7 @@ srandom();
; return 0; }
EOF
if { (eval echo configure:3873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_srandom=yes"
else
......@@ -3894,12 +3925,12 @@ fi
echo $ac_n "checking for gethostname""... $ac_c" 1>&6
echo "configure:3898: checking for gethostname" >&5
echo "configure:3929: checking for gethostname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3903 "configure"
#line 3934 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostname(); below. */
......@@ -3922,7 +3953,7 @@ gethostname();
; return 0; }
EOF
if { (eval echo configure:3926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:3957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gethostname=yes"
else
......@@ -3947,12 +3978,12 @@ fi
echo $ac_n "checking for random""... $ac_c" 1>&6
echo "configure:3951: checking for random" >&5
echo "configure:3982: checking for random" >&5
if eval "test \"`echo '$''{'ac_cv_func_random'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3956 "configure"
#line 3987 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char random(); below. */
......@@ -3975,7 +4006,7 @@ random();
; return 0; }
EOF
if { (eval echo configure:3979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4010: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_random=yes"
else
......@@ -4000,12 +4031,12 @@ fi
echo $ac_n "checking for inet_aton""... $ac_c" 1>&6
echo "configure:4004: checking for inet_aton" >&5
echo "configure:4035: checking for inet_aton" >&5
if eval "test \"`echo '$''{'ac_cv_func_inet_aton'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4009 "configure"
#line 4040 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char inet_aton(); below. */
......@@ -4028,7 +4059,7 @@ inet_aton();
; return 0; }
EOF
if { (eval echo configure:4032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_inet_aton=yes"
else
......@@ -4053,12 +4084,12 @@ fi
echo $ac_n "checking for strerror""... $ac_c" 1>&6
echo "configure:4057: checking for strerror" >&5
echo "configure:4088: checking for strerror" >&5
if eval "test \"`echo '$''{'ac_cv_func_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4062 "configure"
#line 4093 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strerror(); below. */
......@@ -4081,7 +4112,7 @@ strerror();
; return 0; }
EOF
if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strerror=yes"
else
......@@ -4107,12 +4138,12 @@ fi
echo $ac_n "checking for strdup""... $ac_c" 1>&6
echo "configure:4111: checking for strdup" >&5
echo "configure:4142: checking for strdup" >&5
if eval "test \"`echo '$''{'ac_cv_func_strdup'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4116 "configure"
#line 4147 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strdup(); below. */
......@@ -4135,7 +4166,7 @@ strdup();
; return 0; }
EOF
if { (eval echo configure:4139: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strdup=yes"
else
......@@ -4160,12 +4191,12 @@ fi
echo $ac_n "checking for strtol""... $ac_c" 1>&6
echo "configure:4164: checking for strtol" >&5
echo "configure:4195: checking for strtol" >&5
if eval "test \"`echo '$''{'ac_cv_func_strtol'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4169 "configure"
#line 4200 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strtol(); below. */
......@@ -4188,7 +4219,7 @@ strtol();
; return 0; }
EOF
if { (eval echo configure:4192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strtol=yes"
else
......@@ -4213,12 +4244,12 @@ fi
echo $ac_n "checking for strtoul""... $ac_c" 1>&6
echo "configure:4217: checking for strtoul" >&5
echo "configure:4248: checking for strtoul" >&5
if eval "test \"`echo '$''{'ac_cv_func_strtoul'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4222 "configure"
#line 4253 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strtoul(); below. */
......@@ -4241,7 +4272,7 @@ strtoul();
; return 0; }
EOF
if { (eval echo configure:4245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strtoul=yes"
else
......@@ -4266,12 +4297,12 @@ fi
echo $ac_n "checking for strcasecmp""... $ac_c" 1>&6
echo "configure:4270: checking for strcasecmp" >&5
echo "configure:4301: checking for strcasecmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_strcasecmp'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4275 "configure"
#line 4306 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strcasecmp(); below. */
......@@ -4294,7 +4325,7 @@ strcasecmp();
; return 0; }
EOF
if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_strcasecmp=yes"
else
......@@ -4319,12 +4350,12 @@ fi
echo $ac_n "checking for cbrt""... $ac_c" 1>&6
echo "configure:4323: checking for cbrt" >&5
echo "configure:4354: checking for cbrt" >&5
if eval "test \"`echo '$''{'ac_cv_func_cbrt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4328 "configure"
#line 4359 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char cbrt(); below. */
......@@ -4347,7 +4378,7 @@ cbrt();
; return 0; }
EOF
if { (eval echo configure:4351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_cbrt=yes"
else
......@@ -4368,7 +4399,7 @@ EOF
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for cbrt in -lm""... $ac_c" 1>&6
echo "configure:4372: checking for cbrt in -lm" >&5
echo "configure:4403: checking for cbrt in -lm" >&5
ac_lib_var=`echo m'_'cbrt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4376,7 +4407,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4380 "configure"
#line 4411 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4387,7 +4418,7 @@ int main() {
cbrt()
; return 0; }
EOF
if { (eval echo configure:4391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4413,12 +4444,12 @@ fi
fi
echo $ac_n "checking for rint""... $ac_c" 1>&6
echo "configure:4417: checking for rint" >&5
echo "configure:4448: checking for rint" >&5
if eval "test \"`echo '$''{'ac_cv_func_rint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4422 "configure"
#line 4453 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char rint(); below. */
......@@ -4441,7 +4472,7 @@ rint();
; return 0; }
EOF
if { (eval echo configure:4445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_rint=yes"
else
......@@ -4462,7 +4493,7 @@ EOF
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for rint in -lm""... $ac_c" 1>&6
echo "configure:4466: checking for rint in -lm" >&5
echo "configure:4497: checking for rint in -lm" >&5
ac_lib_var=`echo m'_'rint | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4470,7 +4501,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4474 "configure"
#line 4505 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4481,7 +4512,7 @@ int main() {
rint()
; return 0; }
EOF
if { (eval echo configure:4485: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4520,7 +4551,7 @@ ice_save_LDFLAGS="$LDFLAGS"
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
echo "configure:4524: checking for X" >&5
echo "configure:4555: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
......@@ -4582,12 +4613,12 @@ if test "$ac_x_includes" = NO; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
#line 4586 "configure"
#line 4617 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4591: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:4622: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -4656,14 +4687,14 @@ if test "$ac_x_libraries" = NO; then
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4660 "configure"
#line 4691 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
if { (eval echo configure:4667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
......@@ -4769,17 +4800,17 @@ else
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
echo "configure:4773: checking whether -R must be followed by a space" >&5
echo "configure:4804: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
#line 4776 "configure"
#line 4807 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { (eval echo configure:4783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_R_nospace=yes
else
......@@ -4795,14 +4826,14 @@ rm -f conftest*
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
#line 4799 "configure"
#line 4830 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
if { (eval echo configure:4806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_R_space=yes
else
......@@ -4834,7 +4865,7 @@ rm -f conftest*
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
echo "configure:4838: checking for dnet_ntoa in -ldnet" >&5
echo "configure:4869: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4842,7 +4873,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4846 "configure"
#line 4877 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4853,7 +4884,7 @@ int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:4857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4875,7 +4906,7 @@ fi
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
echo "configure:4879: checking for dnet_ntoa in -ldnet_stub" >&5
echo "configure:4910: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4883,7 +4914,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4887 "configure"
#line 4918 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4894,7 +4925,7 @@ int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:4898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -4923,12 +4954,12 @@ fi
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
echo "configure:4927: checking for gethostbyname" >&5
echo "configure:4958: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4932 "configure"
#line 4963 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
......@@ -4951,7 +4982,7 @@ gethostbyname();
; return 0; }
EOF
if { (eval echo configure:4955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:4986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
......@@ -4972,7 +5003,7 @@ fi
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
echo "configure:4976: checking for gethostbyname in -lnsl" >&5
echo "configure:5007: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -4980,7 +5011,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4984 "configure"
#line 5015 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -4991,7 +5022,7 @@ int main() {
gethostbyname()
; return 0; }
EOF
if { (eval echo configure:4995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5021,12 +5052,12 @@ fi
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
echo "configure:5025: checking for connect" >&5
echo "configure:5056: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5030 "configure"
#line 5061 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
......@@ -5049,7 +5080,7 @@ connect();
; return 0; }
EOF
if { (eval echo configure:5053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
......@@ -5070,7 +5101,7 @@ fi
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:5074: checking for connect in -lsocket" >&5
echo "configure:5105: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5078,7 +5109,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5082 "configure"
#line 5113 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5089,7 +5120,7 @@ int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:5093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5113,12 +5144,12 @@ fi
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
echo "configure:5117: checking for remove" >&5
echo "configure:5148: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5122 "configure"
#line 5153 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
......@@ -5141,7 +5172,7 @@ remove();
; return 0; }
EOF
if { (eval echo configure:5145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
......@@ -5162,7 +5193,7 @@ fi
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
echo "configure:5166: checking for remove in -lposix" >&5
echo "configure:5197: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5170,7 +5201,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5174 "configure"
#line 5205 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5181,7 +5212,7 @@ int main() {
remove()
; return 0; }
EOF
if { (eval echo configure:5185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5205,12 +5236,12 @@ fi
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
echo "configure:5209: checking for shmat" >&5
echo "configure:5240: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5214 "configure"
#line 5245 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
......@@ -5233,7 +5264,7 @@ shmat();
; return 0; }
EOF
if { (eval echo configure:5237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
......@@ -5254,7 +5285,7 @@ fi
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
echo "configure:5258: checking for shmat in -lipc" >&5
echo "configure:5289: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5262,7 +5293,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5266 "configure"
#line 5297 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5273,7 +5304,7 @@ int main() {
shmat()
; return 0; }
EOF
if { (eval echo configure:5277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5306,7 +5337,7 @@ fi
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
echo "configure:5310: checking for IceConnectionNumber in -lICE" >&5
echo "configure:5341: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5314,7 +5345,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lICE $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5318 "configure"
#line 5349 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5325,7 +5356,7 @@ int main() {
IceConnectionNumber()
; return 0; }
EOF
if { (eval echo configure:5329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5358,7 +5389,7 @@ LDFLAGS="$LDFLAGS $X_LIBS"
X11_LIBS=""
echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
echo "configure:5362: checking for XOpenDisplay in -lX11" >&5
echo "configure:5393: checking for XOpenDisplay in -lX11" >&5
ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5366,7 +5397,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-lX11 ${X_PRE_LIBS} $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5370 "configure"
#line 5401 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
......@@ -5377,7 +5408,7 @@ int main() {
XOpenDisplay()
; return 0; }
EOF
if { (eval echo configure:5381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5419,17 +5450,17 @@ then
TCL_INCDIR=no
ac_safe=`echo "tcl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tcl.h""... $ac_c" 1>&6
echo "configure:5423: checking for tcl.h" >&5
echo "configure:5454: checking for tcl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5428 "configure"
#line 5459 "configure"
#include "confdefs.h"
#include <tcl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5433: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:5464: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -5456,26 +5487,28 @@ USE_TCL=
fi
fi
if test "$USE_TCL" = "true"
then
TCL_LIB=
echo $ac_n "checking for main in -ltcl""... $ac_c" 1>&6
echo "configure:5464: checking for main in -ltcl" >&5
ac_lib_var=`echo tcl'_'main | sed 'y%./+-%__p_%'`
if test "$USE_TCL" = "true"; then
TCL_LIB=
tcl_libs="tcl8.0 tcl80 tcl7.6 tcl76 tcl"
for tcl_lib in $tcl_libs; do
if test -z "$TCL_LIB"; then
echo $ac_n "checking for main in -l$tcl_lib""... $ac_c" 1>&6
echo "configure:5497: checking for main in -l$tcl_lib" >&5
ac_lib_var=`echo $tcl_lib'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ltcl $LIBS"
LIBS="-l$tcl_lib $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5472 "configure"
#line 5505 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:5479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......@@ -5490,18 +5523,20 @@ LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
TCL_LIB=tcl
TCL_LIB=$tcl_lib
else
echo "$ac_t""no" 1>&6
fi
if test -z "$TCL_LIB"; then
echo "configure: warning: tcl support disabled; Tcl library missing" 1>&2
USE_TCL=
else
TCL_LIB=-l$TCL_LIB
fi
fi
done
if test -z "$TCL_LIB"; then
echo "configure: warning: tcl support disabled; Tcl library missing" 1>&2
USE_TCL=
else
TCL_LIB=-l$TCL_LIB
fi
fi
......@@ -5518,17 +5553,17 @@ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
TK_INCDIR=no
ac_safe=`echo "tk.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tk.h""... $ac_c" 1>&6
echo "configure:5522: checking for tk.h" >&5
echo "configure:5557: checking for tk.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 5527 "configure"
#line 5562 "configure"
#include "confdefs.h"
#include <tk.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5532: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
{ (eval echo configure:5567: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
......@@ -5572,7 +5607,7 @@ CPPFLAGS="$CPPFLAGS $X_CFLAGS"
LDFLAGS="$LDFLAGS $X_LIBS"
TK_LIB=
echo $ac_n "checking for main in -ltk""... $ac_c" 1>&6
echo "configure:5576: checking for main in -ltk" >&5
echo "configure:5611: checking for main in -ltk" >&5
ac_lib_var=`echo tk'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
......@@ -5580,14 +5615,14 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ltk $X11_LIBS $TCL_LIB $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5584 "configure"
#line 5619 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:5591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
if { (eval echo configure:5626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
......
src/configure.in
View file @ 05102c75
......@@ -141,62 +141,47 @@ CC=`grep '^CC:' $TEMPLATE | awk -F: '{print $2}'`
LIBS=`grep '^LIBS:' $TEMPLATE | awk -F: '{print $2}'`
dnl We now need to check for additional directories (include
dnl and library directories.
echo "**************************************************************"
echo "We now need to know if your compiler needs to search any
echo "additional directories for include or library files. If
echo "you don't know the answers to these questions, then just
echo "hit enter and we will try and figure it out. If things
echo "don't compile because of missing libraries or include
echo "files, then you probably need to enter something here.
echo "enter 'none' or new directories to override default"
echo ""
$ECHO_N "Additional directories to search for include files { $SRCH_INC }: $ECHO_C"
if test "X$with_defaults" = "Xyes"
then
a=$SRCH_INC
echo ""
else
read a
fi
if test "$a." = "none."
then
SRCH_INC=
CPPFLAGS=
else
if test "$a." = "."
then
a=$SRCH_INC
fi
CPPFLAGS=`echo "$a" | sed 's@ *@ @g; s@^\([[^ ]]\)@-I\1@; s@ \([[^ ]]\)@ -I\1@g'`
AC_ARG_WITH(includes,
[ --with-includes=DIR site header files for tk/tcl, etc in DIR],
[
case "$withval" in
"" | y | ye | yes | n | no)
AC_MSG_ERROR([*** You must supply an argument to the --with-includes option.])
;;
esac
INCLUDE_DIRS="$withval"
])
if test "$INCLUDE_DIRS"; then
for dir in $INCLUDE_DIRS; do
if test -d "$dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir"
else
AC_MSG_WARN([*** Include directory $dir does not exist.])
fi
done
fi
export CPPFLAGS
echo "- setting CPPFLAGS=$CPPFLAGS"
$ECHO_N "Additional directories to search for library files { $SRCH_LIB }: $ECHO_C"
if test "X$with_defaults" = "Xyes"
then
a=$SRCH_LIB
echo ""
else
read a
AC_ARG_WITH(libraries,
[ --with-libraries=DIR site library directories for tk/tcl, etc in DIR],
[
case "$withval" in
"" | y | ye | yes | n | no)
AC_MSG_ERROR([*** You must supply an argument to the --with-libraries option.])
;;
esac
LIBRARY_DIRS="$withval"
])
if test "$LIBRARY_DIRS"; then
for dir in $withval; do
if test -d "$dir"; then
PGSQL_LDFLAGS="$PGSQL_LDFLAGS -L$dir"
else
AC_MSG_WARN([*** Library directory $dir does not exist.])
fi
done
fi
if test "$a." = "none."
then
SRCH_LIB=
LDFLAGS=
else
if test "$a." = "."
then
a=$SRCH_LIB
fi
LDFLAGS=`echo "$a" | sed 's@ *@ @g; s@^\([[^ ]]\)@-L\1@; s@ \([[^ ]]\)@ -L\1@g'`
fi
export LDFLAGS
echo "- setting LDFLAGS=$LDFLAGS"
dnl We have read the default value of USE_LOCALE from the template
dnl file. We have a further option of using
......@@ -242,6 +227,27 @@ AC_ARG_WITH(
USE_TCL=true; AC_MSG_RESULT(enabled),
USE_TCL=false; AC_MSG_RESULT(disabled)
)
dnl Add tcl/tk candidate directories to CPPFLAGS
if test "$USE_TCL"; then
header_dirs="/usr/include $INCLUDE_DIRS"
tcl_dirs="tcl8.0 tcl80 tcl7.6 tcl76"
tk_dirs="tk8.0 tk4.2"
for dir in $header_dirs; do
for tcl_dir in $tcl_dirs; do
if test -d "$dir/$tcl_dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir/$tcl_dir"
fi
done
done
for dir in $header_dirs; do
for tk_dir in $tk_dirs; do
if test -d "$dir/$tk_dir"; then
PGSQL_CPPFLAGS="$PGSQL_CPPFLAGS -I$dir/$tk_dir"
fi
done
done
fi
export USE_TCL
USE_X=$USE_TCL
......@@ -253,6 +259,15 @@ AC_ARG_WITH(
USE_PERL=true; AC_MSG_RESULT(enabled),
USE_PERL=false; AC_MSG_RESULT(disabled)
)
dnl Verify that postgres is already installed
dnl per instructions for perl interface installation
if test "$USE_PERL" = "true"; then
if test ! -x $prefix/bin/postgres; then
AC_MSG_WARN(perl support disabled; postgres not previously installed)
USE_PERL=
fi
fi
export USE_PERL
dnl Unless we specify the command line options
......@@ -276,6 +291,13 @@ else
AC_PROG_CC
fi
CPPFLAGS="$CPPFLAGS $PGSQL_CPPFLAGS"
export CPPFLAGS
echo "- setting CPPFLAGS=$CPPFLAGS"
LDFLAGS="$LDFLAGS $PGSQL_LDFLAGS"
export LDFLAGS
echo "- setting LDFLAGS=$LDFLAGS"
AC_CONFIG_HEADER(include/config.h)
......@@ -577,17 +599,21 @@ fi
fi
dnl Check for Tcl archive
if test "$USE_TCL" = "true"
then
TCL_LIB=
AC_CHECK_LIB(tcl, main, TCL_LIB=tcl)
if test -z "$TCL_LIB"; then
AC_MSG_WARN(tcl support disabled; Tcl library missing)
USE_TCL=
else
TCL_LIB=-l$TCL_LIB
fi
AC_SUBST(TCL_LIB)
if test "$USE_TCL" = "true"; then
TCL_LIB=
tcl_libs="tcl8.0 tcl80 tcl7.6 tcl76 tcl"
for tcl_lib in $tcl_libs; do
if test -z "$TCL_LIB"; then
AC_CHECK_LIB($tcl_lib, main, TCL_LIB=$tcl_lib)
fi
done
if test -z "$TCL_LIB"; then
AC_MSG_WARN(tcl support disabled; Tcl library missing)
USE_TCL=
else
TCL_LIB=-l$TCL_LIB
fi
AC_SUBST(TCL_LIB)
fi
dnl Check for location of Tk support (only if Tcl used)
......
src/interfaces/libpgtcl/Makefile.in
View file @ 05102c75
......@@ -7,7 +7,7 @@
#
#
# IDENTIFICATION
# $Header: /cvsroot/pgsql/src/interfaces/libpgtcl/Attic/Makefile.in,v 1.5 1998/03/23 06:03:04 momjian Exp $
# $Header: /cvsroot/pgsql/src/interfaces/libpgtcl/Attic/Makefile.in,v 1.6 1998/04/05 20:28:23 momjian Exp $
#
#-------------------------------------------------------------------------
......@@ -31,12 +31,14 @@ endif
install-shlib-dep :=
shlib :=
LIBPQ = -L $(SRCDIR)/interfaces/libpq -lpq
ifeq ($(PORTNAME), linux)
ifdef LINUX_ELF
install-shlib-dep := install-shlib
shlib := libpgtcl.so.1
CFLAGS += $(CFLAGS_SL)
LDFLAGS_SL = -shared -L$(SRCDIR)/interfaces/libpq -lpq
LDFLAGS_SL = -shared
endif
endif
......@@ -52,14 +54,14 @@ endif
ifeq ($(PORTNAME), i386_solaris)
install-shlib-dep := install-shlib
shlib := libpgtcl.so.1
LDFLAGS_SL = -G -z text -L$(SRCDIR)/interfaces/libpq -lpq
LDFLAGS_SL = -G -z text
CFLAGS += $(CFLAGS_SL)
endif
ifeq ($(PORTNAME), univel)
install-shlib-dep := install-shlib
shlib := libpgtcl.so.1
LDFLAGS_SL = -G -z text -L$(SRCDIR)/interfaces/libpq -lpq
LDFLAGS_SL = -G -z text
CFLAGS += $(CFLAGS_SL)
endif
......@@ -77,7 +79,7 @@ endif
$(RANLIB) libpgtcl.a
$(shlib): $(OBJS)
$(LD) $(LDFLAGS_SL) -o $@ $(OBJS)
$(LD) $(LDFLAGS_SL) -o $@ $(OBJS) $(LIBPQ)
ln -sf $@ libpgtcl.so
.PHONY: beforeinstall-headers install-headers
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment