/*-------------------------------------------------------------------------
 *
 * syslogger.c
 *
 * The system logger (syslogger) appeared in Postgres 8.0. It catches all
 * stderr output from the postmaster, backends, and other subprocesses
 * by redirecting to a pipe, and writes it to a set of logfiles.
 * It's possible to have size and age limits for the logfile configured
 * in postgresql.conf. If these limits are reached or passed, the
 * current logfile is closed and a new one is created (rotated).
 * The logfiles are stored in a subdirectory (configurable in
 * postgresql.conf), using a user-selectable naming scheme.
 *
 * Author: Andreas Pflug <pgadmin@pse-consulting.de>
 *
 * Copyright (c) 2004-2014, PostgreSQL Global Development Group
 *
 *
 * IDENTIFICATION
 *	  src/backend/postmaster/syslogger.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <fcntl.h>
#include <limits.h>
#include <signal.h>
#include <time.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/time.h>

#include "lib/stringinfo.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "nodes/pg_list.h"
#include "pgtime.h"
#include "postmaster/fork_process.h"
#include "postmaster/postmaster.h"
#include "postmaster/syslogger.h"
#include "storage/dsm.h"
#include "storage/ipc.h"
#include "storage/latch.h"
#include "storage/pg_shmem.h"
#include "utils/guc.h"
#include "utils/ps_status.h"
#include "utils/timestamp.h"

/*
 * We read() into a temp buffer twice as big as a chunk, so that any fragment
 * left after processing can be moved down to the front and we'll still have
 * room to read a full chunk.
 */
#define READ_BUF_SIZE (2 * PIPE_CHUNK_SIZE)


/*
 * GUC parameters.  Logging_collector cannot be changed after postmaster
 * start, but the rest can change at SIGHUP.
 */
bool		Logging_collector = false;
int			Log_RotationAge = HOURS_PER_DAY * MINS_PER_HOUR;
int			Log_RotationSize = 10 * 1024;
char	   *Log_directory = NULL;
char	   *Log_filename = NULL;
bool		Log_truncate_on_rotation = false;
int			Log_file_mode = S_IRUSR | S_IWUSR;

/*
 * Globally visible state (used by elog.c)
 */
bool		am_syslogger = false;

extern bool redirection_done;

/*
 * Private state
 */
static pg_time_t next_rotation_time;
static bool pipe_eof_seen = false;
static bool rotation_disabled = false;
static FILE *syslogFile = NULL;
static FILE *csvlogFile = NULL;
NON_EXEC_STATIC pg_time_t first_syslogger_file_time = 0;
static char *last_file_name = NULL;
static char *last_csv_file_name = NULL;
static Latch sysLoggerLatch;

/*
 * Buffers for saving partial messages from different backends.
 *
 * Keep NBUFFER_LISTS lists of these, with the entry for a given source pid
 * being in the list numbered (pid % NBUFFER_LISTS), so as to cut down on
 * the number of entries we have to examine for any one incoming message.
 * There must never be more than one entry for the same source pid.
 *
 * An inactive buffer is not removed from its list, just held for re-use.
 * An inactive buffer has pid == 0 and undefined contents of data.
 */
typedef struct
{
	int32		pid;			/* PID of source process */
	StringInfoData data;		/* accumulated data, as a StringInfo */
} save_buffer;

#define NBUFFER_LISTS 256
static List *buffer_lists[NBUFFER_LISTS];

/* These must be exported for EXEC_BACKEND case ... annoying */
#ifndef WIN32
int			syslogPipe[2] = {-1, -1};
#else
HANDLE		syslogPipe[2] = {0, 0};
#endif

#ifdef WIN32
static HANDLE threadHandle = 0;
static CRITICAL_SECTION sysloggerSection;
#endif

/*
 * Flags set by interrupt handlers for later service in the main loop.
 */
static volatile sig_atomic_t got_SIGHUP = false;
static volatile sig_atomic_t rotation_requested = false;


/* Local subroutines */
#ifdef EXEC_BACKEND
static pid_t syslogger_forkexec(void);
static void syslogger_parseArgs(int argc, char *argv[]);
#endif
NON_EXEC_STATIC void SysLoggerMain(int argc, char *argv[]) __attribute__((noreturn));
static void process_pipe_input(char *logbuffer, int *bytes_in_logbuffer);
static void flush_pipe_input(char *logbuffer, int *bytes_in_logbuffer);
static void open_csvlogfile(void);
static FILE *logfile_open(const char *filename, const char *mode,
			 bool allow_errors);

#ifdef WIN32
static unsigned int __stdcall pipeThread(void *arg);
#endif
static void logfile_rotate(bool time_based_rotation, int size_rotation_for);
static char *logfile_getname(pg_time_t timestamp, const char *suffix);
static void set_next_rotation_time(void);
static void sigHupHandler(SIGNAL_ARGS);
static void sigUsr1Handler(SIGNAL_ARGS);


/*
 * Main entry point for syslogger process
 * argc/argv parameters are valid only in EXEC_BACKEND case.
 */
NON_EXEC_STATIC void
SysLoggerMain(int argc, char *argv[])
{
#ifndef WIN32
	char		logbuffer[READ_BUF_SIZE];
	int			bytes_in_logbuffer = 0;
#endif
	char	   *currentLogDir;
	char	   *currentLogFilename;
	int			currentLogRotationAge;
	pg_time_t	now;

	IsUnderPostmaster = true;	/* we are a postmaster subprocess now */

	MyProcPid = getpid();		/* reset MyProcPid */

	MyStartTime = time(NULL);	/* set our start time in case we call elog */
	now = MyStartTime;

#ifdef EXEC_BACKEND
	syslogger_parseArgs(argc, argv);
#endif   /* EXEC_BACKEND */

	am_syslogger = true;

	init_ps_display("logger process", "", "", "");

	/*
	 * If we restarted, our stderr is already redirected into our own input
	 * pipe.  This is of course pretty useless, not to mention that it
	 * interferes with detecting pipe EOF.  Point stderr to /dev/null. This
	 * assumes that all interesting messages generated in the syslogger will
	 * come through elog.c and will be sent to write_syslogger_file.
	 */
	if (redirection_done)
	{
		int			fd = open(DEVNULL, O_WRONLY, 0);

		/*
		 * The closes might look redundant, but they are not: we want to be
		 * darn sure the pipe gets closed even if the open failed.  We can
		 * survive running with stderr pointing nowhere, but we can't afford
		 * to have extra pipe input descriptors hanging around.
		 *
		 * As we're just trying to reset these to go to DEVNULL, there's not
		 * much point in checking for failure from the close/dup2 calls here,
		 * if they fail then presumably the file descriptors are closed and
		 * any writes will go into the bitbucket anyway.
		 */
		close(fileno(stdout));
		close(fileno(stderr));
		if (fd != -1)
		{
			(void) dup2(fd, fileno(stdout));
			(void) dup2(fd, fileno(stderr));
			close(fd);
		}
	}

	/*
	 * Syslogger's own stderr can't be the syslogPipe, so set it back to text
	 * mode if we didn't just close it. (It was set to binary in
	 * SubPostmasterMain).
	 */
#ifdef WIN32
	else
		_setmode(_fileno(stderr), _O_TEXT);
#endif

	/*
	 * Also close our copy of the write end of the pipe.  This is needed to
	 * ensure we can detect pipe EOF correctly.  (But note that in the restart
	 * case, the postmaster already did this.)
	 */
#ifndef WIN32
	if (syslogPipe[1] >= 0)
		close(syslogPipe[1]);
	syslogPipe[1] = -1;
#else
	if (syslogPipe[1])
		CloseHandle(syslogPipe[1]);
	syslogPipe[1] = 0;
#endif

	/*
	 * If possible, make this process a group leader, so that the postmaster
	 * can signal any child processes too.  (syslogger probably never has any
	 * child processes, but for consistency we make all postmaster child
	 * processes do this.)
	 */
#ifdef HAVE_SETSID
	if (setsid() < 0)
		elog(FATAL, "setsid() failed: %m");
#endif

	InitializeLatchSupport();	/* needed for latch waits */

	/* Initialize private latch for use by signal handlers */
	InitLatch(&sysLoggerLatch);

	/*
	 * Properly accept or ignore signals the postmaster might send us
	 *
	 * Note: we ignore all termination signals, and instead exit only when all
	 * upstream processes are gone, to ensure we don't miss any dying gasps of
	 * broken backends...
	 */

	pqsignal(SIGHUP, sigHupHandler);	/* set flag to read config file */
	pqsignal(SIGINT, SIG_IGN);
	pqsignal(SIGTERM, SIG_IGN);
	pqsignal(SIGQUIT, SIG_IGN);
	pqsignal(SIGALRM, SIG_IGN);
	pqsignal(SIGPIPE, SIG_IGN);
	pqsignal(SIGUSR1, sigUsr1Handler);	/* request log rotation */
	pqsignal(SIGUSR2, SIG_IGN);

	/*
	 * Reset some signals that are accepted by postmaster but not here
	 */
	pqsignal(SIGCHLD, SIG_DFL);
	pqsignal(SIGTTIN, SIG_DFL);
	pqsignal(SIGTTOU, SIG_DFL);
	pqsignal(SIGCONT, SIG_DFL);
	pqsignal(SIGWINCH, SIG_DFL);

	PG_SETMASK(&UnBlockSig);

#ifdef WIN32
	/* Fire up separate data transfer thread */
	InitializeCriticalSection(&sysloggerSection);
	EnterCriticalSection(&sysloggerSection);

	threadHandle = (HANDLE) _beginthreadex(NULL, 0, pipeThread, NULL, 0, NULL);
	if (threadHandle == 0)
		elog(FATAL, "could not create syslogger data transfer thread: %m");
#endif   /* WIN32 */

	/*
	 * Remember active logfile's name.  We recompute this from the reference
	 * time because passing down just the pg_time_t is a lot cheaper than
	 * passing a whole file path in the EXEC_BACKEND case.
	 */
	last_file_name = logfile_getname(first_syslogger_file_time, NULL);

	/* remember active logfile parameters */
	currentLogDir = pstrdup(Log_directory);
	currentLogFilename = pstrdup(Log_filename);
	currentLogRotationAge = Log_RotationAge;
	/* set next planned rotation time */
	set_next_rotation_time();

	/* main worker loop */
	for (;;)
	{
		bool		time_based_rotation = false;
		int			size_rotation_for = 0;
		long		cur_timeout;
		int			cur_flags;

#ifndef WIN32
		int			rc;
#endif

		/* Clear any already-pending wakeups */
		ResetLatch(&sysLoggerLatch);

		/*
		 * Process any requests or signals received recently.
		 */
		if (got_SIGHUP)
		{
			got_SIGHUP = false;
			ProcessConfigFile(PGC_SIGHUP);

			/*
			 * Check if the log directory or filename pattern changed in
			 * postgresql.conf. If so, force rotation to make sure we're
			 * writing the logfiles in the right place.
			 */
			if (strcmp(Log_directory, currentLogDir) != 0)
			{
				pfree(currentLogDir);
				currentLogDir = pstrdup(Log_directory);
				rotation_requested = true;

				/*
				 * Also, create new directory if not present; ignore errors
				 */
				mkdir(Log_directory, S_IRWXU);
			}
			if (strcmp(Log_filename, currentLogFilename) != 0)
			{
				pfree(currentLogFilename);
				currentLogFilename = pstrdup(Log_filename);
				rotation_requested = true;
			}

			/*
			 * If rotation time parameter changed, reset next rotation time,
			 * but don't immediately force a rotation.
			 */
			if (currentLogRotationAge != Log_RotationAge)
			{
				currentLogRotationAge = Log_RotationAge;
				set_next_rotation_time();
			}

			/*
			 * If we had a rotation-disabling failure, re-enable rotation
			 * attempts after SIGHUP, and force one immediately.
			 */
			if (rotation_disabled)
			{
				rotation_disabled = false;
				rotation_requested = true;
			}
		}

		if (Log_RotationAge > 0 && !rotation_disabled)
		{
			/* Do a logfile rotation if it's time */
			now = (pg_time_t) time(NULL);
			if (now >= next_rotation_time)
				rotation_requested = time_based_rotation = true;
		}

		if (!rotation_requested && Log_RotationSize > 0 && !rotation_disabled)
		{
			/* Do a rotation if file is too big */
			if (ftell(syslogFile) >= Log_RotationSize * 1024L)
			{
				rotation_requested = true;
				size_rotation_for |= LOG_DESTINATION_STDERR;
			}
			if (csvlogFile != NULL &&
				ftell(csvlogFile) >= Log_RotationSize * 1024L)
			{
				rotation_requested = true;
				size_rotation_for |= LOG_DESTINATION_CSVLOG;
			}
		}

		if (rotation_requested)
		{
			/*
			 * Force rotation when both values are zero. It means the request
			 * was sent by pg_rotate_logfile.
			 */
			if (!time_based_rotation && size_rotation_for == 0)
				size_rotation_for = LOG_DESTINATION_STDERR | LOG_DESTINATION_CSVLOG;
			logfile_rotate(time_based_rotation, size_rotation_for);
		}

		/*
		 * Calculate time till next time-based rotation, so that we don't
		 * sleep longer than that.  We assume the value of "now" obtained
		 * above is still close enough.  Note we can't make this calculation
		 * until after calling logfile_rotate(), since it will advance
		 * next_rotation_time.
		 *
		 * Also note that we need to beware of overflow in calculation of the
		 * timeout: with large settings of Log_RotationAge, next_rotation_time
		 * could be more than INT_MAX msec in the future.  In that case we'll
		 * wait no more than INT_MAX msec, and try again.
		 */
		if (Log_RotationAge > 0 && !rotation_disabled)
		{
			pg_time_t	delay;

			delay = next_rotation_time - now;
			if (delay > 0)
			{
				if (delay > INT_MAX / 1000)
					delay = INT_MAX / 1000;
				cur_timeout = delay * 1000L;	/* msec */
			}
			else
				cur_timeout = 0;
			cur_flags = WL_TIMEOUT;
		}
		else
		{
			cur_timeout = -1L;
			cur_flags = 0;
		}

		/*
		 * Sleep until there's something to do
		 */
#ifndef WIN32
		rc = WaitLatchOrSocket(&sysLoggerLatch,
							   WL_LATCH_SET | WL_SOCKET_READABLE | cur_flags,
							   syslogPipe[0],
							   cur_timeout);

		if (rc & WL_SOCKET_READABLE)
		{
			int			bytesRead;

			bytesRead = read(syslogPipe[0],
							 logbuffer + bytes_in_logbuffer,
							 sizeof(logbuffer) - bytes_in_logbuffer);
			if (bytesRead < 0)
			{
				if (errno != EINTR)
					ereport(LOG,
							(errcode_for_socket_access(),
							 errmsg("could not read from logger pipe: %m")));
			}
			else if (bytesRead > 0)
			{
				bytes_in_logbuffer += bytesRead;
				process_pipe_input(logbuffer, &bytes_in_logbuffer);
				continue;
			}
			else
			{
				/*
				 * Zero bytes read when select() is saying read-ready means
				 * EOF on the pipe: that is, there are no longer any processes
				 * with the pipe write end open.  Therefore, the postmaster
				 * and all backends are shut down, and we are done.
				 */
				pipe_eof_seen = true;

				/* if there's any data left then force it out now */
				flush_pipe_input(logbuffer, &bytes_in_logbuffer);
			}
		}
#else							/* WIN32 */

		/*
		 * On Windows we leave it to a separate thread to transfer data and
		 * detect pipe EOF.  The main thread just wakes up to handle SIGHUP
		 * and rotation conditions.
		 *
		 * Server code isn't generally thread-safe, so we ensure that only one
		 * of the threads is active at a time by entering the critical section
		 * whenever we're not sleeping.
		 */
		LeaveCriticalSection(&sysloggerSection);

		(void) WaitLatch(&sysLoggerLatch,
						 WL_LATCH_SET | cur_flags,
						 cur_timeout);

		EnterCriticalSection(&sysloggerSection);
#endif   /* WIN32 */

		if (pipe_eof_seen)
		{
			/*
			 * seeing this message on the real stderr is annoying - so we make
			 * it DEBUG1 to suppress in normal use.
			 */
			ereport(DEBUG1,
					(errmsg("logger shutting down")));

			/*
			 * Normal exit from the syslogger is here.  Note that we
			 * deliberately do not close syslogFile before exiting; this is to
			 * allow for the possibility of elog messages being generated
			 * inside proc_exit.  Regular exit() will take care of flushing
			 * and closing stdio channels.
			 */
			proc_exit(0);
		}
	}
}

/*
 * Postmaster subroutine to start a syslogger subprocess.
 */
int
SysLogger_Start(void)
{
	pid_t		sysloggerPid;
	char	   *filename;

	if (!Logging_collector)
		return 0;

	/*
	 * If first time through, create the pipe which will receive stderr
	 * output.
	 *
	 * If the syslogger crashes and needs to be restarted, we continue to use
	 * the same pipe (indeed must do so, since extant backends will be writing
	 * into that pipe).
	 *
	 * This means the postmaster must continue to hold the read end of the
	 * pipe open, so we can pass it down to the reincarnated syslogger. This
	 * is a bit klugy but we have little choice.
	 */
#ifndef WIN32
	if (syslogPipe[0] < 0)
	{
		if (pipe(syslogPipe) < 0)
			ereport(FATAL,
					(errcode_for_socket_access(),
					 (errmsg("could not create pipe for syslog: %m"))));
	}
#else
	if (!syslogPipe[0])
	{
		SECURITY_ATTRIBUTES sa;

		memset(&sa, 0, sizeof(SECURITY_ATTRIBUTES));
		sa.nLength = sizeof(SECURITY_ATTRIBUTES);
		sa.bInheritHandle = TRUE;

		if (!CreatePipe(&syslogPipe[0], &syslogPipe[1], &sa, 32768))
			ereport(FATAL,
					(errcode_for_file_access(),
					 (errmsg("could not create pipe for syslog: %m"))));
	}
#endif

	/*
	 * Create log directory if not present; ignore errors
	 */
	mkdir(Log_directory, S_IRWXU);

	/*
	 * The initial logfile is created right in the postmaster, to verify that
	 * the Log_directory is writable.  We save the reference time so that the
	 * syslogger child process can recompute this file name.
	 *
	 * It might look a bit strange to re-do this during a syslogger restart,
	 * but we must do so since the postmaster closed syslogFile after the
	 * previous fork (and remembering that old file wouldn't be right anyway).
	 * Note we always append here, we won't overwrite any existing file.  This
	 * is consistent with the normal rules, because by definition this is not
	 * a time-based rotation.
	 */
	first_syslogger_file_time = time(NULL);
	filename = logfile_getname(first_syslogger_file_time, NULL);

	syslogFile = logfile_open(filename, "a", false);

	pfree(filename);

#ifdef EXEC_BACKEND
	switch ((sysloggerPid = syslogger_forkexec()))
#else
	switch ((sysloggerPid = fork_process()))
#endif
	{
		case -1:
			ereport(LOG,
					(errmsg("could not fork system logger: %m")));
			return 0;

#ifndef EXEC_BACKEND
		case 0:
			/* in postmaster child ... */
			/* Close the postmaster's sockets */
			ClosePostmasterPorts(true);

			/* Lose the postmaster's on-exit routines */
			on_exit_reset();

			/* Drop our connection to postmaster's shared memory, as well */
			dsm_detach_all();
			PGSharedMemoryDetach();

			/* do the work */
			SysLoggerMain(0, NULL);
			break;
#endif

		default:
			/* success, in postmaster */

			/* now we redirect stderr, if not done already */
			if (!redirection_done)
			{
#ifdef WIN32
				int			fd;
#endif

				/*
				 * Leave a breadcrumb trail when redirecting, in case the user
				 * forgets that redirection is active and looks only at the
				 * original stderr target file.
				 */
				ereport(LOG,
						(errmsg("redirecting log output to logging collector process"),
				errhint("Future log output will appear in directory \"%s\".",
						Log_directory)));

#ifndef WIN32
				fflush(stdout);
				if (dup2(syslogPipe[1], fileno(stdout)) < 0)
					ereport(FATAL,
							(errcode_for_file_access(),
							 errmsg("could not redirect stdout: %m")));
				fflush(stderr);
				if (dup2(syslogPipe[1], fileno(stderr)) < 0)
					ereport(FATAL,
							(errcode_for_file_access(),
							 errmsg("could not redirect stderr: %m")));
				/* Now we are done with the write end of the pipe. */
				close(syslogPipe[1]);
				syslogPipe[1] = -1;
#else

				/*
				 * open the pipe in binary mode and make sure stderr is binary
				 * after it's been dup'ed into, to avoid disturbing the pipe
				 * chunking protocol.
				 */
				fflush(stderr);
				fd = _open_osfhandle((intptr_t) syslogPipe[1],
									 _O_APPEND | _O_BINARY);
				if (dup2(fd, _fileno(stderr)) < 0)
					ereport(FATAL,
							(errcode_for_file_access(),
							 errmsg("could not redirect stderr: %m")));
				close(fd);
				_setmode(_fileno(stderr), _O_BINARY);

				/*
				 * Now we are done with the write end of the pipe.
				 * CloseHandle() must not be called because the preceding
				 * close() closes the underlying handle.
				 */
				syslogPipe[1] = 0;
#endif
				redirection_done = true;
			}

			/* postmaster will never write the file; close it */
			fclose(syslogFile);
			syslogFile = NULL;
			return (int) sysloggerPid;
	}

	/* we should never reach here */
	return 0;
}


#ifdef EXEC_BACKEND

/*
 * syslogger_forkexec() -
 *
 * Format up the arglist for, then fork and exec, a syslogger process
 */
static pid_t
syslogger_forkexec(void)
{
	char	   *av[10];
	int			ac = 0;
	char		filenobuf[32];

	av[ac++] = "postgres";
	av[ac++] = "--forklog";
	av[ac++] = NULL;			/* filled in by postmaster_forkexec */

	/* static variables (those not passed by write_backend_variables) */
#ifndef WIN32
	if (syslogFile != NULL)
		snprintf(filenobuf, sizeof(filenobuf), "%d",
				 fileno(syslogFile));
	else
		strcpy(filenobuf, "-1");
#else							/* WIN32 */
	if (syslogFile != NULL)
		snprintf(filenobuf, sizeof(filenobuf), "%ld",
				 (long) _get_osfhandle(_fileno(syslogFile)));
	else
		strcpy(filenobuf, "0");
#endif   /* WIN32 */
	av[ac++] = filenobuf;

	av[ac] = NULL;
	Assert(ac < lengthof(av));

	return postmaster_forkexec(ac, av);
}

/*
 * syslogger_parseArgs() -
 *
 * Extract data from the arglist for exec'ed syslogger process
 */
static void
syslogger_parseArgs(int argc, char *argv[])
{
	int			fd;

	Assert(argc == 4);
	argv += 3;

#ifndef WIN32
	fd = atoi(*argv++);
	if (fd != -1)
	{
		syslogFile = fdopen(fd, "a");
		setvbuf(syslogFile, NULL, PG_IOLBF, 0);
	}
#else							/* WIN32 */
	fd = atoi(*argv++);
	if (fd != 0)
	{
		fd = _open_osfhandle(fd, _O_APPEND | _O_TEXT);
		if (fd > 0)
		{
			syslogFile = fdopen(fd, "a");
			setvbuf(syslogFile, NULL, PG_IOLBF, 0);
		}
	}
#endif   /* WIN32 */
}
#endif   /* EXEC_BACKEND */


/* --------------------------------
 *		pipe protocol handling
 * --------------------------------
 */

/*
 * Process data received through the syslogger pipe.
 *
 * This routine interprets the log pipe protocol which sends log messages as
 * (hopefully atomic) chunks - such chunks are detected and reassembled here.
 *
 * The protocol has a header that starts with two nul bytes, then has a 16 bit
 * length, the pid of the sending process, and a flag to indicate if it is
 * the last chunk in a message. Incomplete chunks are saved until we read some
 * more, and non-final chunks are accumulated until we get the final chunk.
 *
 * All of this is to avoid 2 problems:
 * . partial messages being written to logfiles (messes rotation), and
 * . messages from different backends being interleaved (messages garbled).
 *
 * Any non-protocol messages are written out directly. These should only come
 * from non-PostgreSQL sources, however (e.g. third party libraries writing to
 * stderr).
 *
 * logbuffer is the data input buffer, and *bytes_in_logbuffer is the number
 * of bytes present.  On exit, any not-yet-eaten data is left-justified in
 * logbuffer, and *bytes_in_logbuffer is updated.
 */
static void
process_pipe_input(char *logbuffer, int *bytes_in_logbuffer)
{
	char	   *cursor = logbuffer;
	int			count = *bytes_in_logbuffer;
	int			dest = LOG_DESTINATION_STDERR;

	/* While we have enough for a header, process data... */
	while (count >= (int) sizeof(PipeProtoHeader))
	{
		PipeProtoHeader p;
		int			chunklen;

		/* Do we have a valid header? */
		memcpy(&p, cursor, sizeof(PipeProtoHeader));
		if (p.nuls[0] == '\0' && p.nuls[1] == '\0' &&
			p.len > 0 && p.len <= PIPE_MAX_PAYLOAD &&
			p.pid != 0 &&
			(p.is_last == 't' || p.is_last == 'f' ||
			 p.is_last == 'T' || p.is_last == 'F'))
		{
			List	   *buffer_list;
			ListCell   *cell;
			save_buffer *existing_slot = NULL,
					   *free_slot = NULL;
			StringInfo	str;

			chunklen = PIPE_HEADER_SIZE + p.len;

			/* Fall out of loop if we don't have the whole chunk yet */
			if (count < chunklen)
				break;

			dest = (p.is_last == 'T' || p.is_last == 'F') ?
				LOG_DESTINATION_CSVLOG : LOG_DESTINATION_STDERR;

			/* Locate any existing buffer for this source pid */
			buffer_list = buffer_lists[p.pid % NBUFFER_LISTS];
			foreach(cell, buffer_list)
			{
				save_buffer *buf = (save_buffer *) lfirst(cell);

				if (buf->pid == p.pid)
				{
					existing_slot = buf;
					break;
				}
				if (buf->pid == 0 && free_slot == NULL)
					free_slot = buf;
			}

			if (p.is_last == 'f' || p.is_last == 'F')
			{
				/*
				 * Save a complete non-final chunk in a per-pid buffer
				 */
				if (existing_slot != NULL)
				{
					/* Add chunk to data from preceding chunks */
					str = &(existing_slot->data);
					appendBinaryStringInfo(str,
										   cursor + PIPE_HEADER_SIZE,
										   p.len);
				}
				else
				{
					/* First chunk of message, save in a new buffer */
					if (free_slot == NULL)
					{
						/*
						 * Need a free slot, but there isn't one in the list,
						 * so create a new one and extend the list with it.
						 */
						free_slot = palloc(sizeof(save_buffer));
						buffer_list = lappend(buffer_list, free_slot);
						buffer_lists[p.pid % NBUFFER_LISTS] = buffer_list;
					}
					free_slot->pid = p.pid;
					str = &(free_slot->data);
					initStringInfo(str);
					appendBinaryStringInfo(str,
										   cursor + PIPE_HEADER_SIZE,
										   p.len);
				}
			}
			else
			{
				/*
				 * Final chunk --- add it to anything saved for that pid, and
				 * either way write the whole thing out.
				 */
				if (existing_slot != NULL)
				{
					str = &(existing_slot->data);
					appendBinaryStringInfo(str,
										   cursor + PIPE_HEADER_SIZE,
										   p.len);
					write_syslogger_file(str->data, str->len, dest);
					/* Mark the buffer unused, and reclaim string storage */
					existing_slot->pid = 0;
					pfree(str->data);
				}
				else
				{
					/* The whole message was one chunk, evidently. */
					write_syslogger_file(cursor + PIPE_HEADER_SIZE, p.len,
										 dest);
				}
			}

			/* Finished processing this chunk */
			cursor += chunklen;
			count -= chunklen;
		}
		else
		{
			/* Process non-protocol data */

			/*
			 * Look for the start of a protocol header.  If found, dump data
			 * up to there and repeat the loop.  Otherwise, dump it all and
			 * fall out of the loop.  (Note: we want to dump it all if at all
			 * possible, so as to avoid dividing non-protocol messages across
			 * logfiles.  We expect that in many scenarios, a non-protocol
			 * message will arrive all in one read(), and we want to respect
			 * the read() boundary if possible.)
			 */
			for (chunklen = 1; chunklen < count; chunklen++)
			{
				if (cursor[chunklen] == '\0')
					break;
			}
			/* fall back on the stderr log as the destination */
			write_syslogger_file(cursor, chunklen, LOG_DESTINATION_STDERR);
			cursor += chunklen;
			count -= chunklen;
		}
	}

	/* We don't have a full chunk, so left-align what remains in the buffer */
	if (count > 0 && cursor != logbuffer)
		memmove(logbuffer, cursor, count);
	*bytes_in_logbuffer = count;
}

/*
 * Force out any buffered data
 *
 * This is currently used only at syslogger shutdown, but could perhaps be
 * useful at other times, so it is careful to leave things in a clean state.
 */
static void
flush_pipe_input(char *logbuffer, int *bytes_in_logbuffer)
{
	int			i;

	/* Dump any incomplete protocol messages */
	for (i = 0; i < NBUFFER_LISTS; i++)
	{
		List	   *list = buffer_lists[i];
		ListCell   *cell;

		foreach(cell, list)
		{
			save_buffer *buf = (save_buffer *) lfirst(cell);

			if (buf->pid != 0)
			{
				StringInfo	str = &(buf->data);

				write_syslogger_file(str->data, str->len,
									 LOG_DESTINATION_STDERR);
				/* Mark the buffer unused, and reclaim string storage */
				buf->pid = 0;
				pfree(str->data);
			}
		}
	}

	/*
	 * Force out any remaining pipe data as-is; we don't bother trying to
	 * remove any protocol headers that may exist in it.
	 */
	if (*bytes_in_logbuffer > 0)
		write_syslogger_file(logbuffer, *bytes_in_logbuffer,
							 LOG_DESTINATION_STDERR);
	*bytes_in_logbuffer = 0;
}


/* --------------------------------
 *		logfile routines
 * --------------------------------
 */

/*
 * Write text to the currently open logfile
 *
 * This is exported so that elog.c can call it when am_syslogger is true.
 * This allows the syslogger process to record elog messages of its own,
 * even though its stderr does not point at the syslog pipe.
 */
void
write_syslogger_file(const char *buffer, int count, int destination)
{
	int			rc;
	FILE	   *logfile;

	if (destination == LOG_DESTINATION_CSVLOG && csvlogFile == NULL)
		open_csvlogfile();

	logfile = destination == LOG_DESTINATION_CSVLOG ? csvlogFile : syslogFile;
	rc = fwrite(buffer, 1, count, logfile);

	/* can't use ereport here because of possible recursion */
	if (rc != count)
		write_stderr("could not write to log file: %s\n", strerror(errno));
}

#ifdef WIN32

/*
 * Worker thread to transfer data from the pipe to the current logfile.
 *
 * We need this because on Windows, WaitforMultipleObjects does not work on
 * unnamed pipes: it always reports "signaled", so the blocking ReadFile won't
 * allow for SIGHUP; and select is for sockets only.
 */
static unsigned int __stdcall
pipeThread(void *arg)
{
	char		logbuffer[READ_BUF_SIZE];
	int			bytes_in_logbuffer = 0;

	for (;;)
	{
		DWORD		bytesRead;
		BOOL		result;

		result = ReadFile(syslogPipe[0],
						  logbuffer + bytes_in_logbuffer,
						  sizeof(logbuffer) - bytes_in_logbuffer,
						  &bytesRead, 0);

		/*
		 * Enter critical section before doing anything that might touch
		 * global state shared by the main thread. Anything that uses
		 * palloc()/pfree() in particular are not safe outside the critical
		 * section.
		 */
		EnterCriticalSection(&sysloggerSection);
		if (!result)
		{
			DWORD		error = GetLastError();

			if (error == ERROR_HANDLE_EOF ||
				error == ERROR_BROKEN_PIPE)
				break;
			_dosmaperr(error);
			ereport(LOG,
					(errcode_for_file_access(),
					 errmsg("could not read from logger pipe: %m")));
		}
		else if (bytesRead > 0)
		{
			bytes_in_logbuffer += bytesRead;
			process_pipe_input(logbuffer, &bytes_in_logbuffer);
		}

		/*
		 * If we've filled the current logfile, nudge the main thread to do a
		 * log rotation.
		 */
		if (Log_RotationSize > 0)
		{
			if (ftell(syslogFile) >= Log_RotationSize * 1024L ||
				(csvlogFile != NULL && ftell(csvlogFile) >= Log_RotationSize * 1024L))
				SetLatch(&sysLoggerLatch);
		}
		LeaveCriticalSection(&sysloggerSection);
	}

	/* We exit the above loop only upon detecting pipe EOF */
	pipe_eof_seen = true;

	/* if there's any data left then force it out now */
	flush_pipe_input(logbuffer, &bytes_in_logbuffer);

	/* set the latch to waken the main thread, which will quit */
	SetLatch(&sysLoggerLatch);

	LeaveCriticalSection(&sysloggerSection);
	_endthread();
	return 0;
}
#endif   /* WIN32 */

/*
 * Open the csv log file - we do this opportunistically, because
 * we don't know if CSV logging will be wanted.
 *
 * This is only used the first time we open the csv log in a given syslogger
 * process, not during rotations.  As with opening the main log file, we
 * always append in this situation.
 */
static void
open_csvlogfile(void)
{
	char	   *filename;

	filename = logfile_getname(time(NULL), ".csv");

	csvlogFile = logfile_open(filename, "a", false);

	if (last_csv_file_name != NULL)		/* probably shouldn't happen */
		pfree(last_csv_file_name);

	last_csv_file_name = filename;
}

/*
 * Open a new logfile with proper permissions and buffering options.
 *
 * If allow_errors is true, we just log any open failure and return NULL
 * (with errno still correct for the fopen failure).
 * Otherwise, errors are treated as fatal.
 */
static FILE *
logfile_open(const char *filename, const char *mode, bool allow_errors)
{
	FILE	   *fh;
	mode_t		oumask;

	/*
	 * Note we do not let Log_file_mode disable IWUSR, since we certainly want
	 * to be able to write the files ourselves.
	 */
	oumask = umask((mode_t) ((~(Log_file_mode | S_IWUSR)) & (S_IRWXU | S_IRWXG | S_IRWXO)));
	fh = fopen(filename, mode);
	umask(oumask);

	if (fh)
	{
		setvbuf(fh, NULL, PG_IOLBF, 0);

#ifdef WIN32
		/* use CRLF line endings on Windows */
		_setmode(_fileno(fh), _O_TEXT);
#endif
	}
	else
	{
		int			save_errno = errno;

		ereport(allow_errors ? LOG : FATAL,
				(errcode_for_file_access(),
				 errmsg("could not open log file \"%s\": %m",
						filename)));
		errno = save_errno;
	}

	return fh;
}

/*
 * perform logfile rotation
 */
static void
logfile_rotate(bool time_based_rotation, int size_rotation_for)
{
	char	   *filename;
	char	   *csvfilename = NULL;
	pg_time_t	fntime;
	FILE	   *fh;

	rotation_requested = false;

	/*
	 * When doing a time-based rotation, invent the new logfile name based on
	 * the planned rotation time, not current time, to avoid "slippage" in the
	 * file name when we don't do the rotation immediately.
	 */
	if (time_based_rotation)
		fntime = next_rotation_time;
	else
		fntime = time(NULL);
	filename = logfile_getname(fntime, NULL);
	if (csvlogFile != NULL)
		csvfilename = logfile_getname(fntime, ".csv");

	/*
	 * Decide whether to overwrite or append.  We can overwrite if (a)
	 * Log_truncate_on_rotation is set, (b) the rotation was triggered by
	 * elapsed time and not something else, and (c) the computed file name is
	 * different from what we were previously logging into.
	 *
	 * Note: last_file_name should never be NULL here, but if it is, append.
	 */
	if (time_based_rotation || (size_rotation_for & LOG_DESTINATION_STDERR))
	{
		if (Log_truncate_on_rotation && time_based_rotation &&
			last_file_name != NULL &&
			strcmp(filename, last_file_name) != 0)
			fh = logfile_open(filename, "w", true);
		else
			fh = logfile_open(filename, "a", true);

		if (!fh)
		{
			/*
			 * ENFILE/EMFILE are not too surprising on a busy system; just
			 * keep using the old file till we manage to get a new one.
			 * Otherwise, assume something's wrong with Log_directory and stop
			 * trying to create files.
			 */
			if (errno != ENFILE && errno != EMFILE)
			{
				ereport(LOG,
						(errmsg("disabling automatic rotation (use SIGHUP to re-enable)")));
				rotation_disabled = true;
			}

			if (filename)
				pfree(filename);
			if (csvfilename)
				pfree(csvfilename);
			return;
		}

		fclose(syslogFile);
		syslogFile = fh;

		/* instead of pfree'ing filename, remember it for next time */
		if (last_file_name != NULL)
			pfree(last_file_name);
		last_file_name = filename;
		filename = NULL;
	}

	/* Same as above, but for csv file. */

	if (csvlogFile != NULL &&
		(time_based_rotation || (size_rotation_for & LOG_DESTINATION_CSVLOG)))
	{
		if (Log_truncate_on_rotation && time_based_rotation &&
			last_csv_file_name != NULL &&
			strcmp(csvfilename, last_csv_file_name) != 0)
			fh = logfile_open(csvfilename, "w", true);
		else
			fh = logfile_open(csvfilename, "a", true);

		if (!fh)
		{
			/*
			 * ENFILE/EMFILE are not too surprising on a busy system; just
			 * keep using the old file till we manage to get a new one.
			 * Otherwise, assume something's wrong with Log_directory and stop
			 * trying to create files.
			 */
			if (errno != ENFILE && errno != EMFILE)
			{
				ereport(LOG,
						(errmsg("disabling automatic rotation (use SIGHUP to re-enable)")));
				rotation_disabled = true;
			}

			if (filename)
				pfree(filename);
			if (csvfilename)
				pfree(csvfilename);
			return;
		}

		fclose(csvlogFile);
		csvlogFile = fh;

		/* instead of pfree'ing filename, remember it for next time */
		if (last_csv_file_name != NULL)
			pfree(last_csv_file_name);
		last_csv_file_name = csvfilename;
		csvfilename = NULL;
	}

	if (filename)
		pfree(filename);
	if (csvfilename)
		pfree(csvfilename);

	set_next_rotation_time();
}


/*
 * construct logfile name using timestamp information
 *
 * If suffix isn't NULL, append it to the name, replacing any ".log"
 * that may be in the pattern.
 *
 * Result is palloc'd.
 */
static char *
logfile_getname(pg_time_t timestamp, const char *suffix)
{
	char	   *filename;
	int			len;

	filename = palloc(MAXPGPATH);

	snprintf(filename, MAXPGPATH, "%s/", Log_directory);

	len = strlen(filename);

	/* treat Log_filename as a strftime pattern */
	pg_strftime(filename + len, MAXPGPATH - len, Log_filename,
				pg_localtime(&timestamp, log_timezone));

	if (suffix != NULL)
	{
		len = strlen(filename);
		if (len > 4 && (strcmp(filename + (len - 4), ".log") == 0))
			len -= 4;
		strlcpy(filename + len, suffix, MAXPGPATH - len);
	}

	return filename;
}

/*
 * Determine the next planned rotation time, and store in next_rotation_time.
 */
static void
set_next_rotation_time(void)
{
	pg_time_t	now;
	struct pg_tm *tm;
	int			rotinterval;

	/* nothing to do if time-based rotation is disabled */
	if (Log_RotationAge <= 0)
		return;

	/*
	 * The requirements here are to choose the next time > now that is a
	 * "multiple" of the log rotation interval.  "Multiple" can be interpreted
	 * fairly loosely.  In this version we align to log_timezone rather than
	 * GMT.
	 */
	rotinterval = Log_RotationAge * SECS_PER_MINUTE;	/* convert to seconds */
	now = (pg_time_t) time(NULL);
	tm = pg_localtime(&now, log_timezone);
	now += tm->tm_gmtoff;
	now -= now % rotinterval;
	now += rotinterval;
	now -= tm->tm_gmtoff;
	next_rotation_time = now;
}

/* --------------------------------
 *		signal handler routines
 * --------------------------------
 */

/* SIGHUP: set flag to reload config file */
static void
sigHupHandler(SIGNAL_ARGS)
{
	int			save_errno = errno;

	got_SIGHUP = true;
	SetLatch(&sysLoggerLatch);

	errno = save_errno;
}

/* SIGUSR1: set flag to rotate logfile */
static void
sigUsr1Handler(SIGNAL_ARGS)
{
	int			save_errno = errno;

	rotation_requested = true;
	SetLatch(&sysLoggerLatch);

	errno = save_errno;
}
