<!--
$Header: /cvsroot/pgsql/doc/src/sgml/syntax.sgml,v 1.50 2001/11/08 23:34:33 petere Exp $
-->

<chapter id="sql-syntax">
 <title>SQL Syntax</title>

 <indexterm zone="sql-syntax">
  <primary>syntax</primary>
  <secondary>SQL</secondary>
 </indexterm>

  <abstract>
   <para>
    This chapter describes the syntax of SQL.
   </para>
  </abstract>

 <sect1 id="sql-syntax-lexical">
  <title>Lexical Structure</title>

  <para>
   SQL input consists of a sequence of
   <firstterm>commands</firstterm>.  A command is composed of a
   sequence of <firstterm>tokens</firstterm>, terminated by a
   semicolon (<quote>;</quote>).  The end of the input stream also
   terminates a command.  Which tokens are valid depends on the syntax
   of the particular command.
  </para>

  <para>
   A token can be a <firstterm>key word</firstterm>, an
   <firstterm>identifier</firstterm>, a <firstterm>quoted
   identifier</firstterm>, a <firstterm>literal</firstterm> (or
   constant), or a special character symbol.  Tokens are normally
   separated by whitespace (space, tab, newline), but need not be if
   there is no ambiguity (which is generally only the case if a
   special character is adjacent to some other token type).
  </para>

  <para>
   Additionally, <firstterm>comments</firstterm> can occur in SQL
   input.  They are not tokens, they are effectively equivalent to
   whitespace.
  </para>

  <informalexample id="sql-syntax-ex-commands">
   <para>
    For example, the following is (syntactically) valid SQL input:
<programlisting>
SELECT * FROM MY_TABLE;
UPDATE MY_TABLE SET A = 5;
INSERT INTO MY_TABLE VALUES (3, 'hi there');
</programlisting>
    This is a sequence of three commands, one per line (although this
    is not required; more than one command can be on a line, and
    commands can usefully be split across lines).
   </para>
  </informalexample>

  <para>
   The SQL syntax is not very consistent regarding what tokens
   identify commands and which are operands or parameters.  The first
   few tokens are generally the command name, so in the above example
   we would usually speak of a <quote>SELECT</quote>, an
   <quote>UPDATE</quote>, and an <quote>INSERT</quote> command.  But
   for instance the <command>UPDATE</command> command always requires
   a <token>SET</token> token to appear in a certain position, and
   this particular variation of <command>INSERT</command> also
   requires a <token>VALUES</token> in order to be complete.  The
   precise syntax rules for each command are described in the
   <citetitle>Reference Manual</citetitle>.
  </para>

  <sect2 id="sql-syntax-identifiers">
   <title>Identifiers and Key Words</title>

   <indexterm zone="sql-syntax-identifiers">
    <primary>identifiers</primary>
   </indexterm>

   <indexterm zone="sql-syntax-identifiers">
    <primary>key words</primary>
    <secondary>syntax</secondary>
   </indexterm>

   <para>
    Tokens such as <token>SELECT</token>, <token>UPDATE</token>, or
    <token>VALUES</token> in the example above are examples of
    <firstterm>key words</firstterm>, that is, words that have a fixed
    meaning in the SQL language.  The tokens <token>MY_TABLE</token>
    and <token>A</token> are examples of
    <firstterm>identifiers</firstterm>.  They identify names of
    tables, columns, or other database objects, depending on the
    command they are used in.  Therefore they are sometimes simply
    called <quote>names</quote>.  Key words and identifiers have the
    same lexical structure, meaning that one cannot know whether a
    token is an identifier or a key word without knowing the language.
    A complete list of key words can be found in <xref
    linkend="sql-keywords-appendix">.
   </para>

   <para>
    SQL identifiers and key words must begin with a letter
    (<literal>a</literal>-<literal>z</literal>) or underscore
    (<literal>_</literal>).  Subsequent characters in an identifier or
    key word can be letters, digits
    (<literal>0</literal>-<literal>9</literal>), or underscores,
    although the SQL standard will not define a key word that contains
    digits or starts or ends with an underscore.
   </para>

   <para>
    The system uses no more than <symbol>NAMEDATALEN</symbol>-1
    characters of an identifier; longer names can be written in
    commands, but they will be truncated.  By default,
    <symbol>NAMEDATALEN</symbol> is 32 so the maximum identifier length
    is 31 (but at the time the system is built,
    <symbol>NAMEDATALEN</symbol> can be changed in
    <filename>src/include/postgres_ext.h</filename>).
   </para>

   <para>
    <indexterm>
     <primary>case sensitivity</primary>
     <secondary>SQL commands</secondary>
    </indexterm>
    Identifier and key word names are case insensitive.  Therefore
<programlisting>
UPDATE MY_TABLE SET A = 5;
</programlisting>
    can equivalently be written as
<programlisting>
uPDaTE my_TabLE SeT a = 5;
</programlisting>
    A convention often used is to write key words in upper
    case and names in lower case, e.g.,
<programlisting>
UPDATE my_table SET a = 5;
</programlisting>
   </para>

   <para>
    <indexterm>
     <primary>quotes</primary>
     <secondary>and identifiers</secondary>
    </indexterm>
    There is a second kind of identifier:  the <firstterm>delimited
    identifier</firstterm> or <firstterm>quoted
    identifier</firstterm>.  It is formed by enclosing an arbitrary
    sequence of characters in double-quotes
    (<literal>"</literal>). <!-- " font-lock mania --> A delimited
    identifier is always an identifier, never a key word.  So
    <literal>"select"</literal> could be used to refer to a column or
    table named <quote>select</quote>, whereas an unquoted
    <literal>select</literal> would be taken as a key word and
    would therefore provoke a parse error when used where a table or
    column name is expected.  The example can be written with quoted
    identifiers like this:
<programlisting>
UPDATE "my_table" SET "a" = 5;
</programlisting>
   </para>

   <para>
    Quoted identifiers can contain any character other than a double
    quote itself.  This allows constructing table or column names that
    would otherwise not be possible, such as ones containing spaces or
    ampersands.  The length limitation still applies.
   </para>

   <para>
    Quoting an identifier also makes it case-sensitive, whereas
    unquoted names are always folded to lower case.  For example, the
    identifiers <literal>FOO</literal>, <literal>foo</literal> and
    <literal>"foo"</literal> are considered the same by
    <productname>Postgres</productname>, but <literal>"Foo"</literal>
    and <literal>"FOO"</literal> are different from these three and
    each other.
    <footnote>
     <para>
      The folding of unquoted names to lower case in <productname>PostgreSQL</>
      is incompatible with the SQL standard, which says that unquoted
      names should be folded to upper case.  Thus, <literal>foo</literal>
      should be equivalent to <literal>"FOO"</literal> not
      <literal>"foo"</literal> according to the standard.  If you want to
      write portable applications you are advised to always quote a particular
      name or never quote it.
     </para>
    </footnote>
   </para>
  </sect2>


  <sect2 id="sql-syntax-constants">
   <title>Constants</title>

   <indexterm zone="sql-syntax-constants">
    <primary>constants</primary>
   </indexterm>

   <para>
    There are four kinds of <firstterm>implicitly typed
    constants</firstterm> in <productname>Postgres</productname>:
    strings, bit strings, integers, and floating point numbers.
    Constants can also be specified with explicit types, which can
    enable more accurate representation and more efficient handling by
    the system. The implicit constants are described below; explicit
    constants are discussed afterwards.
   </para>

   <sect3 id="sql-syntax-strings">
    <title>String Constants</title>

    <indexterm zone="sql-syntax-strings">
     <primary>character strings</primary>
     <secondary>constants</secondary>
    </indexterm>

    <para>
     <indexterm>
      <primary>quotes</primary>
      <secondary>escaping</secondary>
     </indexterm>
     A string constant in SQL is an arbitrary sequence of characters
     bounded by single quotes (<quote>'</quote>), e.g., <literal>'This
     is a string'</literal>.  SQL allows single quotes to be embedded
     in strings by typing two adjacent single quotes (e.g.,
     <literal>'Dianne''s horse'</literal>).  In
     <productname>Postgres</productname> single quotes may
     alternatively be escaped with a backslash (<quote>\</quote>,
     e.g., <literal>'Dianne\'s horse'</literal>).
    </para>

    <para>
     C-style backslash escapes are also available:
     <literal>\b</literal> is a backspace, <literal>\f</literal> is a
     form feed, <literal>\n</literal> is a newline,
     <literal>\r</literal> is a carriage return, <literal>\t</literal>
     is a tab, and <literal>\<replaceable>xxx</replaceable></literal>,
     where <replaceable>xxx</replaceable> is an octal number, is the
     character with the corresponding ASCII code.  Any other character
     following a backslash is taken literally.  Thus, to include a
     backslash in a string constant, type two backslashes.
    </para>

    <para>
     The character with the code zero cannot be in a string constant.
    </para>

    <para>
     Two string constants that are only separated by whitespace
     <emphasis>with at least one newline</emphasis> are concatenated
     and effectively treated as if the string had been written in one
     constant.  For example:
<programlisting>
SELECT 'foo'
'bar';
</programlisting>
     is equivalent to
<programlisting>
SELECT 'foobar';
</programlisting>
     but
<programlisting>
SELECT 'foo'      'bar';
</programlisting>
     is not valid syntax.
    </para>
   </sect3>

   <sect3 id="sql-syntax-bit-strings">
    <title>Bit String Constants</title>

    <indexterm zone="sql-syntax-bit-strings">
     <primary>bit strings</primary>
     <secondary>constants</secondary>
    </indexterm>

    <para>
     Bit string constants look like string constants with a
     <literal>B</literal> (upper or lower case) immediately before the
     opening quote (no intervening whitespace), e.g.,
     <literal>B'1001'</literal>.  The only characters allowed within
     bit string constants are <literal>0</literal> and
     <literal>1</literal>.  Bit string constants can be continued
     across lines in the same way as regular string constants.
    </para>
   </sect3>

   <sect3>
    <title>Integer Constants</title>

    <para>
     Integer constants in SQL are sequences of decimal digits (0
     though 9) with no decimal point.  The range of legal values
     depends on which integer data type is used, but the plain
     <type>integer</type> type accepts values ranging from -2147483648
     to +2147483647.  (The optional plus or minus sign is actually a
     separate unary operator and not part of the integer constant.)
    </para>
   </sect3>

   <sect3>
    <title>Floating Point Constants</title>

    <indexterm>
     <primary>floating point</primary>
     <secondary>constants</secondary>
    </indexterm>

    <para>
     Floating point constants are accepted in these general forms:
<synopsis>
<replaceable>digits</replaceable>.<optional><replaceable>digits</replaceable></optional><optional>e<optional>+-</optional><replaceable>digits</replaceable></optional>
<optional><replaceable>digits</replaceable></optional>.<replaceable>digits</replaceable><optional>e<optional>+-</optional><replaceable>digits</replaceable></optional>
<replaceable>digits</replaceable>e<optional>+-</optional><replaceable>digits</replaceable>
</synopsis>
     where <replaceable>digits</replaceable> is one or more decimal
     digits.  At least one digit must be before or after the decimal
     point, and after the <literal>e</literal> if you use that option.
     Thus, a floating point constant is distinguished from an integer
     constant by the presence of either the decimal point or the
     exponent clause (or both).  There must not be a space or other
     characters embedded in the constant.
    </para>

    <informalexample>
     <para>
      These are some examples of valid floating point constants:
<literallayout>
3.5
4.
.001
5e2
1.925e-3
</literallayout>
     </para>
    </informalexample>

    <para>
     Floating point constants are of type <type>DOUBLE
     PRECISION</type>. <type>REAL</type> can be specified explicitly
     by using <acronym>SQL</acronym> string notation or
     <productname>Postgres</productname> type notation:

<programlisting>
REAL '1.23'  -- string style
'1.23'::REAL -- Postgres (historical) style
     </programlisting>
    </para>
   </sect3>

   <sect3 id="sql-syntax-constants-generic">
    <title>Constants of Other Types</title>

    <indexterm>
     <primary>data types</primary>
     <secondary>constants</secondary>
    </indexterm>

    <para>
     A constant of an <emphasis>arbitrary</emphasis> type can be
     entered using any one of the following notations:
<synopsis>
<replaceable>type</replaceable> '<replaceable>string</replaceable>'
'<replaceable>string</replaceable>'::<replaceable>type</replaceable>
CAST ( '<replaceable>string</replaceable>' AS <replaceable>type</replaceable> )
</synopsis>
     The value inside the string is passed to the input conversion
     routine for the type called <replaceable>type</replaceable>. The
     result is a constant of the indicated type.  The explicit type
     cast may be omitted if there is no ambiguity as to the type the
     constant must be (for example, when it is passed as an argument
     to a non-overloaded function), in which case it is automatically
     coerced.
    </para>

    <para>
     It is also possible to specify a type coercion using a function-like
     syntax:
<synopsis>
<replaceable>typename</replaceable> ( <replaceable>value</replaceable> )
</synopsis>
     although this only works for types whose names are also valid as
     function names.  (For example, <literal>double precision</literal>
     can't be used this way --- but the equivalent <literal>float8</literal>
     can.)
    </para>

    <para>
     The <literal>::</literal>, <literal>CAST()</literal>, and
     function-call syntaxes can also be used to specify the type of
     arbitrary expressions, but the form
     <replaceable>type</replaceable>
     '<replaceable>string</replaceable>' can only be used to specify
     the type of a literal constant.
    </para>
   </sect3>

   <sect3>
    <title>Array constants</title>

    <indexterm>
     <primary>arrays</primary>
     <secondary>constants</secondary>
    </indexterm>

    <para>
     The general format of an array constant is the following:
<synopsis>
'{ <replaceable>val1</replaceable> <replaceable>delim</replaceable> <replaceable>val2</replaceable> <replaceable>delim</replaceable> ... }'
</synopsis>
     where <replaceable>delim</replaceable> is the delimiter character
     for the type, as recorded in its <literal>pg_type</literal>
     entry.  (For all built-in types, this is the comma character
     <quote><literal>,</literal></>.)  Each <replaceable>val</replaceable> is either a constant
     of the array element type, or a sub-array.  An example of an
     array constant is
<programlisting>
'{{1,2,3},{4,5,6},{7,8,9}}'
</programlisting>
     This constant is a two-dimensional, 3 by 3 array consisting of three
     sub-arrays of integers.
    </para>

    <para>
     Individual array elements can be placed between double-quote
     marks (<literal>"</literal>) <!-- " --> to avoid ambiguity
     problems with respect to white space.  Without quote marks, the
     array-value parser will skip leading white space.
    </para>

    <para>
     (Array constants are actually only a special case of the generic
     type constants discussed in the previous section.  The constant
     is initially treated as a string and passed to the array input
     conversion routine.  An explicit type specification might be
     necessary.)
    </para>
   </sect3>
  </sect2>


  <sect2 id="sql-syntax-operators">
   <title>Operators</title>

   <indexterm zone="sql-syntax-operators">
    <primary>operators</primary>
    <secondary>syntax</secondary>
   </indexterm>

   <para>
    An operator is a sequence of up to <symbol>NAMEDATALEN</symbol>-1
    (31 by default) characters from the following list:
<literallayout>
+ - * / &lt; &gt; = ~ ! @ # % ^ &amp; | ` ? $
</literallayout>

    There are a few restrictions on operator names, however:
    <itemizedlist>
     <listitem>
      <para>
       <literal>$</> (dollar) cannot be a single-character operator, although it
       can be part of a multiple-character operator name.
      </para>
     </listitem>

     <listitem>
      <para>
       <literal>--</literal> and <literal>/*</literal> cannot appear
       anywhere in an operator name, since they will be taken as the
       start of a comment.
      </para>
     </listitem>

     <listitem>
      <para>
       A multiple-character operator name cannot end in <literal>+</> or <literal>-</>,
       unless the name also contains at least one of these characters:
<literallayout>
~ ! @ # % ^ &amp; | ` ? $
</literallayout>
       For example, <literal>@-</literal> is an allowed operator name,
       but <literal>*-</literal> is not.  This restriction allows
       <productname>Postgres</productname> to parse SQL-compliant
       queries without requiring spaces between tokens.
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <para>
    When working with non-SQL-standard operator names, you will usually
    need to separate adjacent operators with spaces to avoid ambiguity.
    For example, if you have defined a left-unary operator named <literal>@</literal>,
    you cannot write <literal>X*@Y</literal>; you must write
    <literal>X* @Y</literal> to ensure that
    <productname>Postgres</productname> reads it as two operator names
    not one.
   </para>
  </sect2>

  <sect2>
   <title>Special Characters</title>

  <para>
   Some characters that are not alphanumeric have a special meaning
   that is different from being an operator.  Details on the usage can
   be found at the location where the respective syntax element is
   described.  This section only exists to advise the existence and
   summarize the purposes of these characters.

   <itemizedlist>
    <listitem>
     <para>
      A dollar sign (<literal>$</literal>) followed by digits is used
      to represent the positional parameters in the body of a function
      definition.  In other contexts the dollar sign may be part of an
      operator name.
     </para>
    </listitem>

    <listitem>
     <para>
      Parentheses (<literal>()</literal>) have their usual meaning to
      group expressions and enforce precedence.  In some cases
      parentheses are required as part of the fixed syntax of a
      particular SQL command.
     </para>
    </listitem>

    <listitem>
     <para>
      Brackets (<literal>[]</literal>) are used to select the elements
      of an array.  See <xref linkend="arrays"> for more information
      on arrays.
     </para>
    </listitem>

    <listitem>
     <para>
      Commas (<literal>,</literal>) are used in some syntactical
      constructs to separate the elements of a list.
     </para>
    </listitem>

    <listitem>
     <para>
      The semicolon (<literal>;</literal>) terminates an SQL command.
      It cannot appear anywhere within a command, except within a
      string constant or quoted identifier.
     </para>
    </listitem>

    <listitem>
     <para>
      The colon (<literal>:</literal>) is used to select
      <quote>slices</quote> from arrays. (See <xref
      linkend="arrays">.)  In certain SQL dialects (such as Embedded
      SQL), the colon is used to prefix variable names.
     </para>
    </listitem>

    <listitem>
     <para>
      The asterisk (<literal>*</literal>) has a special meaning when
      used in the <command>SELECT</command> command or with the
      <function>COUNT</function> aggregate function.
     </para>
    </listitem>

    <listitem>
     <para>
      The period (<literal>.</literal>) is used in floating point
      constants, and to separate table and column names.
     </para>
    </listitem>
   </itemizedlist>

   </para>
  </sect2>

  <sect2 id="sql-syntax-comments">
   <title>Comments</title>

   <indexterm zone="sql-syntax-comments">
    <primary>comments</primary>
    <secondary>in SQL</secondary>
   </indexterm>

   <para>
    A comment is an arbitrary sequence of characters beginning with
    double dashes and extending to the end of the line, e.g.:
<programlisting>
-- This is a standard SQL92 comment
</programlisting>
   </para>

   <para>
    Alternatively, C-style block comments can be used:
<programlisting>
/* multiline comment
 * with nesting: /* nested block comment */
 */
</programlisting>
    where the comment begins with <literal>/*</literal> and extends to
    the matching occurrence of <literal>*/</literal>. These block
    comments nest, as specified in SQL99 but unlike C, so that one can
    comment out larger blocks of code that may contain existing block
    comments.
   </para>

   <para>
    A comment is removed from the input stream before further syntax
    analysis and is effectively replaced by whitespace.
   </para>
  </sect2>
 </sect1>


  <sect1 id="sql-syntax-columns">
   <title>Columns</title>

    <para>
     A <firstterm>column</firstterm>
     is either a user-defined column of a given table or one of the
     following system-defined columns:

     <indexterm>
      <primary>columns</primary>
      <secondary>system columns</secondary>
     </indexterm>

     <variablelist>
      <varlistentry>
       <term><structfield>oid</></term>
       <listitem>
	<para>
	 <indexterm>
	  <primary>OID</primary>
	 </indexterm>
	 The object identifier (object ID) of a row.  This is a serial number
	 that is automatically added by Postgres to all table rows (unless
	 the table was created WITHOUT OIDS, in which case this column is
	 not present).
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
      <term><structfield>tableoid</></term>
       <listitem>
	<para>
	 The OID of the table containing this row.  This attribute is
	 particularly handy for queries that select from inheritance
	 hierarchies, since without it, it's difficult to tell which
	 individual table a row came from.  The
	 <structfield>tableoid</structfield> can be joined against the
	 <structfield>oid</structfield> column of
	 <classname>pg_class</classname> to obtain the table name.
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
       <term><structfield>xmin</></term>
       <listitem>
	<para>
	 The identity (transaction ID) of the inserting transaction for
	 this tuple.  (Note: a tuple is an individual state of a row;
	 each UPDATE of a row creates a new tuple for the same logical row.)
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
      <term><structfield>cmin</></term>
       <listitem>
	<para>
	 The command identifier (starting at zero) within the inserting
	 transaction.
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
      <term><structfield>xmax</></term>
       <listitem>
	<para>
	 The identity (transaction ID) of the deleting transaction,
	 or zero for an undeleted tuple.  It is possible for this field
	 to be nonzero in a visible tuple: that usually indicates that the
	 deleting transaction hasn't committed yet, or that an attempted
	 deletion was rolled back.
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
      <term><structfield>cmax</></term>
       <listitem>
	<para>
	 The command identifier within the deleting transaction, or zero.
	</para>
       </listitem>
      </varlistentry>

      <varlistentry>
      <term><structfield>ctid</></term>
       <listitem>
	<para>
	 The tuple ID of the tuple within its table.  This is a pair
	 (block number, tuple index within block) that identifies the
	 physical location of the tuple.  Note that although the <structfield>ctid</structfield>
	 can be used to locate the tuple very quickly, a row's <structfield>ctid</structfield>
	 will change each time it is updated or moved by <command>VACUUM
	 FULL</>.
	 Therefore <structfield>ctid</structfield> is useless as a long-term row identifier.
	 The OID, or even better a user-defined serial number, should
	 be used to identify logical rows.
	</para>
       </listitem>
      </varlistentry>
     </variablelist>
    </para>

    <para>
     OIDs are 32-bit quantities and are assigned from a single cluster-wide
     counter.  In a large or long-lived database, it is possible for the
     counter to wrap around.  Hence, it is bad practice to assume that OIDs
     are unique, unless you take steps to ensure that they are unique.
     Recommended practice when using OIDs for row identification is to create
     a unique index on the OID column of each table for which the OID will be
     used.  Never assume that OIDs are unique across tables; use the
     combination of <structfield>tableoid</> and row OID if you need a database-wide
     identifier.  (Future releases of Postgres are likely to use a separate
     OID counter for each table, so that <structfield>tableoid</> <emphasis>must</> be
     included to arrive at a globally unique identifier.)
    </para>

    <para>
     Transaction identifiers are 32-bit quantities.  In a long-lived
     database it is possible for transaction IDs to wrap around.  This
     is not a fatal problem given appropriate maintenance procedures;
     see the Administrator's Guide for details.  However, it is unwise
     to depend on uniqueness of transaction IDs over the long term
     (more than one billion transactions).
    </para>

    <para>
     Command identifiers are also 32-bit quantities.  This creates a hard
     limit of 2^32 (4 billion) SQL commands within a single transaction.
     In practice this limit is not a problem --- note that the limit is on
     number of SQL queries, not number of tuples processed.
    </para>

    <para>
     For further information on the system attributes consult
     <xref linkend="STON87a">.
    </para>

  </sect1>


 <sect1 id="sql-expressions">
  <title>Value Expressions</title>

  <para>
   Value expressions are used in a variety of contexts, such
   as in the target list of the <command>SELECT</command> command, as
   new column values in <command>INSERT</command> or
   <command>UPDATE</command>, or in search conditions in a number of
   commands.  The result of a value expression is sometimes called a
   <firstterm>scalar</firstterm>, to distinguish it from the result of
   a table expression (which is a table).  Value expressions are
   therefore also called <firstterm>scalar expressions</firstterm> (or
   even simply <firstterm>expressions</firstterm>).  The expression
   syntax allows the calculation of values from primitive parts using
   arithmetic, logical, set, and other operations.
  </para>

  <para>
   A value expression is one of the following:

   <itemizedlist>
    <listitem>
     <para>
      A constant or literal value; see <xref linkend="sql-syntax-constants">.
     </para>
    </listitem>

    <listitem>
     <para>
      A column reference
     </para>
    </listitem>

    <listitem>
     <para>
      An operator invocation:
      <simplelist>
       <member><replaceable>expression</replaceable> <replaceable>operator</replaceable> <replaceable>expression</replaceable> (binary infix operator)</member>
       <member><replaceable>operator</replaceable> <replaceable>expression</replaceable> (unary prefix operator)</member>
       <member><replaceable>expression</replaceable> <replaceable>operator</replaceable> (unary postfix operator)</member>
      </simplelist>
      where <replaceable>operator</replaceable> follows the syntax
      rules of <xref linkend="sql-syntax-operators"> or is one of the
      tokens <token>AND</token>, <token>OR</token>, and
      <token>NOT</token>.  Which particular operators exist and whether
      they are unary or binary depends on what operators have been
      defined by the system or the user.  <xref linkend="functions">
      describes the built-in operators.
     </para>
    </listitem>

    <listitem>
<synopsis>( <replaceable>expression</replaceable> )</synopsis>
     <para>
      Parentheses are used to group subexpressions and override precedence.
     </para>
    </listitem>

    <listitem>
     <para>
      A positional parameter reference, in the body of a function declaration.
     </para>
    </listitem>

    <listitem>
     <para>
      A function call
     </para>
    </listitem>

    <listitem>
     <para>
      An aggregate expression
     </para>
    </listitem>

    <listitem>
     <para>
      A scalar subquery.  This is an ordinary
      <command>SELECT</command> in parentheses that returns exactly one
      row with one column.  It is an error to use a subquery that
      returns more than one row or more than one column in the context
      of a value expression.
     </para>
    </listitem>
   </itemizedlist>
  </para>

  <para>
   In addition to this list, there are a number of constructs that can
   be classified as an expression but do not follow any general syntax
   rules.  These generally have the semantics of a function or
   operator and are explained in the appropriate location in <xref
   linkend="functions">.  An example is the <literal>IS NULL</literal>
   clause.
  </para>

  <para>
   We have already discussed constants in <xref
   linkend="sql-syntax-constants">.  The following sections discuss
   the remaining options.
  </para>

  <sect2>
   <title>Column References</title>

   <para>
    A column can be referenced in the form:
<synopsis>
<replaceable>correlation</replaceable>.<replaceable>columnname</replaceable> `['<replaceable>subscript</replaceable>`]'
</synopsis>

    <replaceable>correlation</replaceable> is either the name of a
    table, an alias for a table defined by means of a FROM clause, or
    the keyword <literal>NEW</literal> or <literal>OLD</literal>.
    (NEW and OLD can only appear in the action portion of a rule,
    while other correlation names can be used in any SQL statement.)
    The correlation name can be omitted if the column name is unique
    across all the tables being used in the current query.  If
    <replaceable>column</replaceable> is of an array type, then the
    optional <replaceable>subscript</replaceable> selects a specific
    element in the array.  If no subscript is provided, then the whole
    array is selected.  Refer to the description of the particular
    commands in the <citetitle>PostgreSQL Reference Manual</citetitle>
    for the allowed syntax in each case.
   </para>
  </sect2>

  <sect2>
   <title>Positional Parameters</title>

   <para>
    A positional parameter reference is used to indicate a parameter
    in an SQL function.  Typically this is used in SQL function
    definition statements.  The form of a parameter is:
<synopsis>
$<replaceable>number</replaceable>
</synopsis>
   </para>

   <para>
    For example, consider the definition of a function,
    <function>dept</function>, as

<programlisting>
CREATE FUNCTION dept (text) RETURNS dept
  AS 'SELECT * FROM dept WHERE name = $1'
  LANGUAGE 'sql';
</programlisting>

    Here the <literal>$1</literal> will be replaced by the first
    function argument when the function is invoked.
   </para>
  </sect2>

  <sect2>
   <title>Function Calls</title>

   <para>
    The syntax for a function call is the name of a function
    (which is subject to the syntax rules for identifiers of <xref
    linkend="sql-syntax-identifiers">), followed by its argument list
    enclosed in parentheses:

<synopsis>
<replaceable>function</replaceable> (<optional><replaceable>expression</replaceable> <optional>, <replaceable>expression</replaceable> ... </optional></optional> )
</synopsis>
   </para>

   <para>
    For example, the following computes the square root of 2:
<programlisting>
sqrt(2)
</programlisting>
   </para>

   <para>
    The list of built-in functions is in <xref linkend="functions">.
    Other functions may be added by the user.
   </para>
  </sect2>

  <sect2 id="syntax-aggregates">
   <title>Aggregate Expressions</title>

   <indexterm zone="syntax-aggregates">
    <primary>aggregate functions</primary>
   </indexterm>

   <para>
    An <firstterm>aggregate expression</firstterm> represents the
    application of an aggregate function across the rows selected by a
    query.  An aggregate function reduces multiple inputs to a single
    output value, such as the sum or average of the inputs.  The
    syntax of an aggregate expression is one of the following:

    <simplelist>
     <member><replaceable>aggregate_name</replaceable> (<replaceable>expression</replaceable>)</member>
     <member><replaceable>aggregate_name</replaceable> (ALL <replaceable>expression</replaceable>)</member>
     <member><replaceable>aggregate_name</replaceable> (DISTINCT <replaceable>expression</replaceable>)</member>
     <member><replaceable>aggregate_name</replaceable> ( * )</member>
    </simplelist>

    where <replaceable>aggregate_name</replaceable> is a previously
    defined aggregate, and <replaceable>expression</replaceable> is
    any expression that does not itself contain an aggregate
    expression.
   </para>

   <para>
    The first form of aggregate expression invokes the aggregate
    across all input rows for which the given expression yields a
    non-NULL value.  (Actually, it is up to the aggregate function
    whether to ignore NULLs or not --- but all the standard ones do.)
    The second form is the same as the first, since
    <literal>ALL</literal> is the default.  The third form invokes the
    aggregate for all distinct non-NULL values of the expression found
    in the input rows.  The last form invokes the aggregate once for
    each input row regardless of NULL or non-NULL values; since no
    particular input value is specified, it is generally only useful
    for the <function>count()</function> aggregate function.
   </para>

   <para>
    For example, <literal>count(*)</literal> yields the total number
    of input rows; <literal>count(f1)</literal> yields the number of
    input rows in which <literal>f1</literal> is non-NULL;
    <literal>count(distinct f1)</literal> yields the number of
    distinct non-NULL values of <literal>f1</literal>.
   </para>

   <para>
    The predefined aggregate functions are described in <xref
    linkend="functions-aggregate">.  Other aggregate functions may be added
    by the user. 
   </para>
  </sect2>

 </sect1>


  <sect1 id="sql-precedence">
   <title>Lexical Precedence</title>

   <indexterm zone="sql-precedence">
    <primary>operators</primary>
    <secondary>precedence</secondary>
   </indexterm>

   <para>
    The precedence and associativity of the operators is hard-wired
    into the parser.  Most operators have the same precedence and are
    left-associative.  This may lead to non-intuitive behavior; for
    example the Boolean operators <literal>&lt;</> and <literal>&gt;</> have a different
    precedence than the Boolean operators <literal>&lt;=</> and <literal>&gt;=</>.  Also,
    you will sometimes need to add parentheses when using combinations
    of binary and unary operators.  For instance
<programlisting>
SELECT 5 ! - 6;
</programlisting>
   will be parsed as
<programlisting>
SELECT 5 ! (- 6);
</programlisting>
    because the parser has no idea -- until it is too late -- that
    <token>!</token> is defined as a postfix operator, not an infix one.
    To get the desired behavior in this case, you must write
<programlisting>
SELECT (5 !) - 6;
</programlisting>
    This is the price one pays for extensibility.
   </para>

   <table tocentry="1">
    <title>Operator Precedence (decreasing)</title>

    <tgroup cols="3">
     <thead>
      <row>
       <entry>Operator/Element</entry>
       <entry>Associativity</entry>
       <entry>Description</entry>
      </row>
     </thead>

     <tbody>
      <row>
       <entry><token>::</token></entry>
       <entry>left</entry>
       <entry><productname>Postgres</productname>-style typecast</entry>
      </row>

      <row>
       <entry><token>[</token> <token>]</token></entry>
       <entry>left</entry>
       <entry>array element selection</entry>
      </row>

      <row>
       <entry><token>.</token></entry>
       <entry>left</entry>
       <entry>table/column name separator</entry>
      </row>

      <row>
       <entry><token>-</token></entry>
       <entry>right</entry>
       <entry>unary minus</entry>
      </row>

      <row>
       <entry><token>^</token></entry>
       <entry>left</entry>
       <entry>exponentiation</entry>
      </row>

      <row>
       <entry><token>*</token> <token>/</token> <token>%</token></entry>
       <entry>left</entry>
       <entry>multiplication, division, modulo</entry>
      </row>

      <row>
       <entry><token>+</token> <token>-</token></entry>
       <entry>left</entry>
       <entry>addition, subtraction</entry>
      </row>

      <row>
       <entry><token>IS</token></entry>
       <entry></entry>
       <entry>test for TRUE, FALSE, UNKNOWN, NULL</entry>
      </row>

      <row>
       <entry><token>ISNULL</token></entry>
       <entry></entry>
       <entry>test for NULL</entry>
      </row>

      <row>
       <entry><token>NOTNULL</token></entry>
       <entry></entry>
       <entry>test for NOT NULL</entry>
      </row>

      <row>
       <entry>(any other)</entry>
       <entry>left</entry>
       <entry>all other native and user-defined operators</entry>
      </row>

      <row>
       <entry><token>IN</token></entry>
       <entry></entry>
       <entry>set membership</entry>
      </row>

      <row>
       <entry><token>BETWEEN</token></entry>
       <entry></entry>
       <entry>containment</entry>
      </row>

      <row>
       <entry><token>OVERLAPS</token></entry>
       <entry></entry>
       <entry>time interval overlap</entry>
      </row>

      <row>
       <entry><token>LIKE</token> <token>ILIKE</token></entry>
       <entry></entry>
       <entry>string pattern matching</entry>
      </row>

      <row>
       <entry><token>&lt;</token> <token>&gt;</token></entry>
       <entry></entry>
       <entry>less than, greater than</entry>
      </row>

      <row>
       <entry><token>=</token></entry>
       <entry>right</entry>
       <entry>equality, assignment</entry>
      </row>

      <row>
       <entry><token>NOT</token></entry>
       <entry>right</entry>
       <entry>logical negation</entry>
      </row>

      <row>
       <entry><token>AND</token></entry>
       <entry>left</entry>
       <entry>logical conjunction</entry>
      </row>

      <row>
       <entry><token>OR</token></entry>
       <entry>left</entry>
       <entry>logical disjunction</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    Note that the operator precedence rules also apply to user-defined
    operators that have the same names as the built-in operators
    mentioned above.  For example, if you define a
    <quote>+</quote> operator for some custom data type it will have
    the same precedence as the built-in <quote>+</quote> operator, no
    matter what yours does.
   </para>
  </sect1>

</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode:sgml
sgml-omittag:nil
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:1
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:"./reference.ced"
sgml-exposed-tags:nil
sgml-local-catalogs:("/usr/lib/sgml/catalog")
sgml-local-ecat-files:nil
End:
-->
