/*-------------------------------------------------------------------------
 *
 * postmaster.c
 *	  This program acts as a clearing house for requests to the
 *	  POSTGRES system.	Frontend programs send a startup message
 *	  to the Postmaster and the postmaster uses the info in the
 *	  message to setup a backend process.
 *
 * Portions Copyright (c) 1996-2000, PostgreSQL, Inc
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $Header: /cvsroot/pgsql/src/backend/postmaster/postmaster.c,v 1.147 2000/06/06 16:04:29 petere Exp $
 *
 * NOTES
 *
 * Initialization:
 *		The Postmaster sets up a few shared memory data structures
 *		for the backends.  It should at the very least initialize the
 *		lock manager.
 *
 * Synchronization:
 *		The Postmaster shares memory with the backends and will have to lock
 *		the shared memory it accesses.	The Postmaster should never block
 *		on messages from clients.
 *
 * Garbage Collection:
 *		The Postmaster cleans up after backends if they have an emergency
 *		exit and/or core dump.
 *
 * Communication:
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include <unistd.h>
#include <signal.h>
#include <sys/wait.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <errno.h>
#include <fcntl.h>
#include <time.h>
#include <sys/param.h>

 /* moved here to prevent double define */
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif

#ifdef HAVE_LIMITS_H
#include <limits.h>
#else
#ifdef HAVE_VALUES_H
#include <values.h>
#endif
#endif

#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif

#ifdef HAVE_GETOPT_H
#include "getopt.h"
#endif

#include "commands/async.h"
#include "lib/dllist.h"
#include "libpq/auth.h"
#include "libpq/crypt.h"
#include "libpq/libpq.h"
#include "libpq/pqcomm.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "nodes/nodes.h"
#include "storage/fd.h"
#include "storage/ipc.h"
#include "storage/proc.h"
#include "access/xlog.h"
#include "tcop/tcopprot.h"
#include "utils/guc.h"
#include "version.h"

/*
 * "postmaster.opts" is a file containing options for postmaser.
 * pg_ctl will use it to restart postmaster.
 */
#define OPTSFNAME	"postmaster.opts"

#if !defined(MAXINT)
#define MAXINT		   INT_MAX
#endif

#define INVALID_SOCK	(-1)
#define ARGV_SIZE	64

#ifdef HAVE_SIGPROCMASK
sigset_t	UnBlockSig,
			BlockSig;

#else
int			UnBlockSig,
			BlockSig;

#endif

/*
 * Info for garbage collection.  Whenever a process dies, the Postmaster
 * cleans up after it.	Currently, NO information is required for cleanup,
 * but I left this structure around in case that changed.
 */
typedef struct bkend
{
	int			pid;			/* process id of backend */
	long		cancel_key;		/* cancel key for cancels for this backend */
} Backend;

Port	   *MyBackendPort = NULL;

/* list of active backends.  For garbage collection only now. */

static Dllist *BackendList;

/* list of ports associated with still open, but incomplete connections */
static Dllist *PortList;

int PostPortName;

 /*
  * This is a boolean indicating that there is at least one backend that
  * is accessing the current shared memory and semaphores. Between the
  * time that we start up, or throw away shared memory segments and start
  * over, and the time we generate the next backend (because we received a
  * connection request), it is false. Other times, it is true.
  */
static short shmem_seq = 0;

 /*
  * This is a sequence number that indicates how many times we've had to
  * throw away the shared memory and start over because we doubted its
  * integrity.	It starts off at zero and is incremented every time we
  * start over.  We use this to ensure that we use a new IPC shared memory
  * key for the new shared memory segment in case the old segment isn't
  * entirely gone yet.
  *
  * The sequence actually cycles back to 0 after 9, so pathologically there
  * could be an IPC failure if 10 sets of backends are all stuck and won't
  * release IPC resources.
  */

static IpcMemoryKey ipc_key;

 /*
  * This is the base IPC shared memory key.  Other keys are generated by
  * adding to this.
  */

int	MaxBackends = DEF_MAXBACKENDS;

 /*
  * MaxBackends is the actual limit on the number of backends we will
  * start. The default is established by configure, but it can be
  * readjusted from 1..MAXBACKENDS with the postmaster -N switch. Note
  * that a larger MaxBackends value will increase the size of the shared
  * memory area as well as cause the postmaster to grab more kernel
  * semaphores, even if you never actually use that many backends.
  */

static int	NextBackendTag = MAXINT;	/* XXX why count down not up? */
static char *progname = (char *) NULL;
static char **real_argv;
static int	real_argc;

static time_t tnow;

/* flag to indicate that SIGHUP arrived during server loop */
static volatile bool got_SIGHUP = false;

/*
 * Default Values
 */
static int	ServerSock_INET = INVALID_SOCK;		/* stream socket server */

#if !defined(__CYGWIN32__) && !defined(__QNX__)
static int	ServerSock_UNIX = INVALID_SOCK;		/* stream socket server */

#endif

#ifdef USE_SSL
static SSL_CTX *SSL_context = NULL;		/* Global SSL context */

#endif

/*
 * Set by the -o option
 */
static char ExtraOptions[MAXPGPATH];

/*
 * These globals control the behavior of the postmaster in case some
 * backend dumps core.	Normally, it kills all peers of the dead backend
 * and reinitializes shared memory.  By specifying -s or -n, we can have
 * the postmaster stop (rather than kill) peers and not reinitialize
 * shared data structures.
 */
static bool Reinit = true;
static int	SendStop = false;

bool NetServer = false;	/* listen on TCP/IP */

#ifdef USE_SSL
static bool SecureNetServer = false;	/* if not zero, postmaster listens
										 * for only SSL non-local
										 * connections */

#endif

static pid_t StartupPID = 0,
			ShutdownPID = 0;

#define			NoShutdown		0
#define			SmartShutdown	1
#define			FastShutdown	2

static int	Shutdown = NoShutdown;

static bool FatalError = false;

/*
 * State for assigning random salts and cancel keys.
 * Also, the global MyCancelKey passes the cancel key assigned to a given
 * backend from the postmaster to that backend (via fork).
 */

static unsigned int random_seed = 0;

extern char *optarg;
extern int	optind,
			opterr;

/*
 * postmaster.c - function prototypes
 */
static void pmdaemonize(char *extraoptions);
static Port *ConnCreate(int serverFd);
static void ConnFree(Port *port);
static void reset_shared(int port);
static void SIGHUP_handler(SIGNAL_ARGS);
static void pmdie(SIGNAL_ARGS);
static void reaper(SIGNAL_ARGS);
static void dumpstatus(SIGNAL_ARGS);
static void CleanupProc(int pid, int exitstatus);
static int	DoBackend(Port *port);
static void ExitPostmaster(int status);
static void usage(const char *);
static int	ServerLoop(void);
static int	BackendStartup(Port *port);
static int	readStartupPacket(void *arg, PacketLen len, void *pkt);
static int	processCancelRequest(Port *port, PacketLen len, void *pkt);
static int	initMasks(fd_set *rmask, fd_set *wmask);
static long PostmasterRandom(void);
static void RandomSalt(char *salt);
static void SignalChildren(SIGNAL_ARGS);
static int	CountChildren(void);
static int
SetOptsFile(char *progname, int port, char *datadir,
			int assert, int nbuf,
			int debuglvl, int netserver,
#ifdef USE_SSL
			int securenetserver,
#endif
			int maxbackends, int reinit,
			int silent, int sendstop, char *extraoptions);

extern int	BootstrapMain(int argc, char *argv[]);
static pid_t SSDataBase(bool startup);

#define StartupDataBase()	SSDataBase(true)
#define ShutdownDataBase()	SSDataBase(false)

#ifdef USE_SSL
static void InitSSL(void);

#endif

#ifdef CYR_RECODE
void		GetCharSetByHost(char *, int, char *);

#endif

#ifdef USE_ASSERT_CHECKING

int			assert_enabled = 1;

#endif

static void
checkDataDir(const char *DataDir, bool *DataDirOK)
{
	if (DataDir == NULL)
	{
		fprintf(stderr, "%s does not know where to find the database system "
				"data.  You must specify the directory that contains the "
				"database system either by specifying the -D invocation "
			 "option or by setting the PGDATA environment variable.\n\n",
				progname);
		*DataDirOK = false;
	}
	else
	{
		char		path[MAXPGPATH];
		FILE	   *fp;

		snprintf(path, sizeof(path), "%s%cbase%ctemplate1%cpg_class",
				 DataDir, SEP_CHAR, SEP_CHAR, SEP_CHAR);
		fp = AllocateFile(path, PG_BINARY_R);
		if (fp == NULL)
		{
			fprintf(stderr, "%s does not find the database system.  "
					"Expected to find it "
			   "in the PGDATA directory \"%s\", but unable to open file "
					"with pathname \"%s\".\n\n",
					progname, DataDir, path);
			*DataDirOK = false;
		}
		else
		{
			char	   *reason;

			/* reason ValidatePgVersion failed.  NULL if didn't */

			FreeFile(fp);

			ValidatePgVersion(DataDir, &reason);
			if (reason)
			{
				fprintf(stderr,
						"Database system in directory %s "
						"is not compatible with this version of "
						"Postgres, or we are unable to read the "
						"PG_VERSION file.  "
						"Explanation from ValidatePgVersion: %s\n\n",
						DataDir, reason);
				free(reason);
				*DataDirOK = false;
			}
			else
				*DataDirOK = true;
		}
	}
}

int
PostmasterMain(int argc, char *argv[])
{
	int			opt;
	int			status;
	int			silentflag = 0;
	bool		DataDirOK;		/* We have a usable PGDATA value */
	char		original_extraoptions[MAXPGPATH];

	*original_extraoptions = '\0';

	progname = argv[0];
	real_argv = argv;
	real_argc = argc;

	/*
	 * for security, no dir or file created can be group or other
	 * accessible
	 */
	umask((mode_t) 0077);

	ResetAllOptions();

	MyProcPid = getpid();
	DataDir = getenv("PGDATA"); /* default value */

	if (getenv("PGPORT"))
		PostPortName = atoi(getenv("PGPORT"));

	/*
	 * First we must scan for a -D argument to get the data dir. Then
	 * read the config file. Finally, scan all the other arguments.
	 * (Command line switches override config file.)
	 *
	 * Note: The two lists of options must be exactly the same, even
	 * though perhaps the first one would only have to be "D:" with
	 * opterr turned off. But some versions of getopt (notably GNU)
	 * are going to arbitrarily permute some "non-options" (according
	 * to the local world view) which will result in some switches
	 * being associated with the wrong argument. Death and destruction
	 * will occur.
	 */
	opterr = 1;
	while ((opt = getopt(argc, argv, "A:a:B:b:D:d:Film:MN:no:p:Ss-:")) != EOF)
	{
		if (opt == 'D')
			DataDir = optarg;
	}

	optind = 1; /* start over */
	checkDataDir(DataDir, &DataDirOK);	/* issues error messages */
	if (!DataDirOK)
	{
		fprintf(stderr, "No data directory -- can't proceed.\n");
		exit(2);
	}

	ProcessConfigFile(PGC_POSTMASTER);

	IgnoreSystemIndexes(false);
	while ((opt = getopt(argc, argv, "A:a:B:b:D:d:Film:MN:no:p:Ss-:")) != EOF)
	{
		switch (opt)
		{
			case 'A':
#ifndef USE_ASSERT_CHECKING
				fprintf(stderr, "Assert checking is not enabled\n");
#else

				/*
				 * Pass this option also to each backend.
				 */
				assert_enabled = atoi(optarg);
				strcat(ExtraOptions, " -A ");
				strcat(ExtraOptions, optarg);
#endif
				break;
			case 'a':
				/* Can no longer set authentication method. */
				break;
			case 'B':
				NBuffers = atoi(optarg);
				break;
			case 'b':
				/* Can no longer set the backend executable file to use. */
				break;
			case 'D':
				/* already done above */
				break;
			case 'd':

				/*
				 * Turn on debugging for the postmaster and the backend
				 * servers descended from it.
				 */
				DebugLvl = atoi(optarg);
				break;
			case 'F':
				enableFsync = false;
				break;
			case 'i':
				NetServer = true;
				break;
#ifdef USE_SSL
			case 'l':
				SecureNetServer = true;
				break;
#endif
			case 'm':
				/* Multiplexed backends no longer supported. */
				break;
			case 'M':

				/*
				 * ignore this flag.  This may be passed in because the
				 * program was run as 'postgres -M' instead of
				 * 'postmaster'
				 */
				break;
			case 'N':

				/*
				 * The max number of backends to start. Can't set to less
				 * than 1 or more than compiled-in limit.
				 */
				MaxBackends = atoi(optarg);
				if (MaxBackends < 1)
					MaxBackends = 1;
				if (MaxBackends > MAXBACKENDS)
					MaxBackends = MAXBACKENDS;
				break;
			case 'n':
				/* Don't reinit shared mem after abnormal exit */
				Reinit = false;
				break;
			case 'o':

				/*
				 * Other options to pass to the backend on the command
				 * line -- useful only for debugging.
				 */
				strcat(ExtraOptions, " ");
				strcat(ExtraOptions, optarg);
				strcpy(original_extraoptions, optarg);
				break;
			case 'p':
				/* Set PGPORT by hand. */
				PostPortName = atoi(optarg);
				break;
			case 'S':

				/*
				 * Start in 'S'ilent mode (disassociate from controlling
				 * tty). You may also think of this as 'S'ysV mode since
				 * it's most badly needed on SysV-derived systems like
				 * SVR4 and HP-UX.
				 */
				silentflag = 1;
				break;
			case 's':

				/*
				 * In the event that some backend dumps core, send
				 * SIGSTOP, rather than SIGUSR1, to all its peers.	This
				 * lets the wily post_hacker collect core dumps from
				 * everyone.
				 */
				SendStop = true;
				break;
			case '-':
			{
				/* A little 'long argument' simulation */
				size_t equal_pos = strcspn(optarg, "=");
				char *cp;

				if (optarg[equal_pos] != '=')
					elog(ERROR, "--%s requires argument", optarg);
				optarg[equal_pos] = '\0';
				for(cp = optarg; *cp; cp++)
					if (*cp == '-')
						*cp = '_';
				SetConfigOption(optarg, optarg + equal_pos + 1, PGC_POSTMASTER);
				break;
			}
			default:
				/* usage() never returns */
				usage(progname);
				break;
		}
	}

	/*
	 * Check for invalid combinations of switches
	 */
	if (NBuffers < 2 * MaxBackends || NBuffers < 16)
	{

		/*
		 * Do not accept -B so small that backends are likely to starve
		 * for lack of buffers.  The specific choices here are somewhat
		 * arbitrary.
		 */
		fprintf(stderr, "%s: -B must be at least twice -N and at least 16.\n",
				progname);
		exit(1);
	}

#ifdef USE_SSL
	if (!NetServer && SecureNetServer)
	{
		fprintf(stderr, "For SSL, you must enable TCP/IP connections.\n",
				argv[0]);
		exit(1);
	}
	InitSSL();
#endif

	if (NetServer)
	{
		status = StreamServerPort(AF_INET, (unsigned short)PostPortName, &ServerSock_INET);
		if (status != STATUS_OK)
		{
			fprintf(stderr, "%s: cannot create INET stream port\n",
					progname);
			exit(1);
		}
	}

#if !defined(__CYGWIN32__) && !defined(__QNX__)
	status = StreamServerPort(AF_UNIX, (unsigned short)PostPortName, &ServerSock_UNIX);
	if (status != STATUS_OK)
	{
		fprintf(stderr, "%s: cannot create UNIX stream port\n",
				progname);
		exit(1);
	}
#endif
	/* set up shared memory and semaphores */
	EnableMemoryContext(TRUE);
	reset_shared(PostPortName);

	/*
	 * Initialize the list of active backends.	This list is only used for
	 * garbage collecting the backend processes.
	 */
	BackendList = DLNewList();
	PortList = DLNewList();

	if (silentflag)
		pmdaemonize(original_extraoptions);
	else
	{

		/*
		 * create pid file. if the file has already existed, exits.
		 */
		SetPidFname(DataDir);
		if (SetPidFile(getpid()) == 0)
		{
			if (SetOptsFile(
							progname,	/* postmaster executable file */
							PostPortName,		/* port number */
							DataDir,	/* PGDATA */
							assert_enabled,		/* whether -A is specified
												 * or not */
							NBuffers,	/* -B: number of shared buffers */
							DebugLvl,	/* -d: debug level */
							NetServer,	/* -i: accept connection from INET */
#ifdef USE_SSL
							SecureNetServer,	/* -l: use SSL */
#endif
							MaxBackends,		/* -N: max number of
												 * backends */
							Reinit,		/* -n: reinit shared mem after
										 * failure */
							silentflag, /* -S: detach tty */
							SendStop,	/* -s: send SIGSTOP */
							original_extraoptions		/* options for backend */
							) != 0)
			{
				UnlinkPidFile();
				ExitPostmaster(1);
				return 0;		/* not reached */
			}
		}
		else
		{
			ExitPostmaster(1);
			return 0;			/* not reached */
		}

		/*
		 * register clean up proc
		 */
		on_proc_exit(UnlinkPidFile, NULL);
	}

	/*
	 * Set up signal handlers for the postmaster process.
	 */
	PG_INITMASK();
	PG_SETMASK(&BlockSig);

	pqsignal(SIGHUP, SIGHUP_handler);	/* reread config file and have children do same */
	pqsignal(SIGINT, pmdie);	/* send SIGTERM and ShutdownDataBase */
	pqsignal(SIGQUIT, pmdie);	/* send SIGUSR1 and die */
	pqsignal(SIGTERM, pmdie);	/* wait for children and ShutdownDataBase */
	pqsignal(SIGALRM, SIG_IGN); /* ignored */
	pqsignal(SIGPIPE, SIG_IGN); /* ignored */
	pqsignal(SIGUSR1, SIG_IGN); /* ignored */
	pqsignal(SIGUSR2, pmdie);	/* send SIGUSR2, don't die */
	pqsignal(SIGCHLD, reaper);	/* handle child termination */
	pqsignal(SIGTTIN, SIG_IGN); /* ignored */
	pqsignal(SIGTTOU, SIG_IGN); /* ignored */
	pqsignal(SIGWINCH, dumpstatus);		/* dump port status */

	StartupPID = StartupDataBase();

	status = ServerLoop();

	ExitPostmaster(status != STATUS_OK);
	return 0;					/* not reached */
}

static void
pmdaemonize(char *extraoptions)
{
	int			i;
	pid_t		pid;

	SetPidFname(DataDir);

	pid = fork();
	if (pid == -1)
	{
		perror("Failed to fork postmaster");
		ExitPostmaster(1);
		return;					/* not reached */
	}
	else if (pid)
	{							/* parent */

		/*
		 * create pid file. if the file has already existed, exits.
		 */
		if (SetPidFile(pid) == 0)
		{
			if (SetOptsFile(
							progname,	/* postmaster executable file */
							PostPortName,		/* port number */
							DataDir,	/* PGDATA */
							assert_enabled,		/* whether -A is specified
												 * or not */
							NBuffers,	/* -B: number of shared buffers */
							DebugLvl,	/* -d: debug level */
							NetServer,	/* -i: accept connection from INET */
#ifdef USE_SSL
							SecureNetServer,	/* -l: use SSL */
#endif
							MaxBackends,		/* -N: max number of
												 * backends */
							Reinit,		/* -n: reinit shared mem after
										 * failure */
							1,	/* -S: detach tty */
							SendStop,	/* -s: send SIGSTOP */
							extraoptions		/* options for backend */
							) != 0)
			{

				/*
				 * Failed to create opts file. kill the child and exit
				 * now.
				 */
				UnlinkPidFile();
				kill(pid, SIGTERM);
				ExitPostmaster(1);
				return;			/* not reached */
			}
			_exit(0);
		}
		else
		{

			/*
			 * Failed to create pid file. kill the child and exit now.
			 */
			kill(pid, SIGTERM);
			ExitPostmaster(1);
			return;				/* not reached */
		}
	}

/* GH: If there's no setsid(), we hopefully don't need silent mode.
 * Until there's a better solution.
 */
#ifdef HAVE_SETSID
	if (setsid() < 0)
	{
		fprintf(stderr, "%s: ", progname);
		perror("cannot disassociate from controlling TTY");
		exit(1);
	}
#endif
	i = open(NULL_DEV, O_RDWR | PG_BINARY);
	dup2(i, 0);
	dup2(i, 1);
	dup2(i, 2);
	close(i);

	/*
	 * register clean up proc
	 */
	on_proc_exit(UnlinkPidFile, NULL);
}

static void
usage(const char *progname)
{
	fprintf(stderr, "usage: %s [options]\n", progname);
#ifdef USE_ASSERT_CHECKING
	fprintf(stderr, "\t-A [1|0]\tenable/disable runtime assert checking\n");
#endif
	fprintf(stderr, "\t-B nbufs\tset number of shared buffers\n");
	fprintf(stderr, "\t-D datadir\tset data directory\n");
	fprintf(stderr, "\t-S \t\tsilent mode (disassociate from tty)\n");
	fprintf(stderr, "\t-a system\tuse this authentication system\n");
	fprintf(stderr, "\t-b backend\tuse a specific backend server executable\n");
	fprintf(stderr, "\t-d [1-5]\tset debugging level\n");
	fprintf(stderr, "\t-i \t\tlisten on TCP/IP sockets as well as Unix domain socket\n");
#ifdef USE_SSL
	fprintf(stderr, " \t-l \t\tfor TCP/IP sockets, listen only on SSL connections\n");
#endif
	fprintf(stderr, "\t-N nprocs\tset max number of backends (1..%d, default %d)\n",
			MAXBACKENDS, DEF_MAXBACKENDS);
	fprintf(stderr, "\t-n \t\tdon't reinitialize shared memory after abnormal exit\n");
	fprintf(stderr, "\t-o option\tpass 'option' to each backend servers\n");
	fprintf(stderr, "\t-p port\tspecify port for postmaster to listen on\n");
	fprintf(stderr, "\t-s \t\tsend SIGSTOP to all backend servers if one dies\n");
	exit(1);
}

static int
ServerLoop(void)
{
	fd_set		readmask,
				writemask;
	int			nSockets;
	Dlelem	   *curr;
	struct timeval now,
				later;
	struct timezone tz;

	gettimeofday(&now, &tz);

	nSockets = initMasks(&readmask, &writemask);

	for (;;)
	{
		Port	   *port;
		fd_set		rmask,
					wmask;

#ifdef USE_SSL
		int			no_select = 0;

#endif

		memmove((char *) &rmask, (char *) &readmask, sizeof(fd_set));
		memmove((char *) &wmask, (char *) &writemask, sizeof(fd_set));

#ifdef USE_SSL
		for (curr = DLGetHead(PortList); curr; curr = DLGetSucc(curr))
		{
			if (((Port *) DLE_VAL(curr))->ssl &&
				SSL_pending(((Port *) DLE_VAL(curr))->ssl) > 0)
			{
				no_select = 1;
				break;
			}
		}
		PG_SETMASK(&UnBlockSig);
		if (no_select)
			FD_ZERO(&rmask);	/* So we don't accept() anything below */
		else
#else
		PG_SETMASK(&UnBlockSig);
#endif
		if (select(nSockets, &rmask, &wmask, (fd_set *) NULL,
				   (struct timeval *) NULL) < 0)
		{
			if (errno == EINTR)
				continue;
			fprintf(stderr, "%s: ServerLoop: select failed: %s\n",
					progname, strerror(errno));
			return STATUS_ERROR;
		}

		/*
		 * Select a random seed at the time of first receiving a request.
		 */
		while (random_seed == 0)
		{
			gettimeofday(&later, &tz);

			/*
			 * We are not sure how much precision is in tv_usec, so we
			 * swap the nibbles of 'later' and XOR them with 'now'. On the
			 * off chance that the result is 0, we loop until it isn't.
			 */
			random_seed = now.tv_usec ^
				((later.tv_usec << 16) |
				 ((later.tv_usec >> 16) & 0xffff));
		}

		/*
		 * Block all signals
		 */
		PG_SETMASK(&BlockSig);

		/* new connection pending on our well-known port's socket */

#if !defined(__CYGWIN32__) && !defined(__QNX__)
		if (ServerSock_UNIX != INVALID_SOCK &&
			FD_ISSET(ServerSock_UNIX, &rmask) &&
			(port = ConnCreate(ServerSock_UNIX)) != NULL)
		{
			PacketReceiveSetup(&port->pktInfo,
							   readStartupPacket,
							   (void *) port);
		}
#endif

		if (ServerSock_INET != INVALID_SOCK &&
			FD_ISSET(ServerSock_INET, &rmask) &&
			(port = ConnCreate(ServerSock_INET)) != NULL)
		{
			PacketReceiveSetup(&port->pktInfo,
							   readStartupPacket,
							   (void *) port);
		}

		/* Build up new masks for select(). */

		nSockets = initMasks(&readmask, &writemask);

		curr = DLGetHead(PortList);

		while (curr)
		{
			Port	   *port = (Port *) DLE_VAL(curr);
			int			status = STATUS_OK;
			Dlelem	   *next;
			int			readyread = 0;

#ifdef USE_SSL
			if (port->ssl)
			{
				if (SSL_pending(port->ssl) ||
					FD_ISSET(port->sock, &rmask))
					readyread = 1;
			}
			else
#endif
			if (FD_ISSET(port->sock, &rmask))
				readyread = 1;

			if (readyread)
			{
				if (DebugLvl > 1)
					fprintf(stderr, "%s: ServerLoop:\t\thandling reading %d\n",
							progname, port->sock);

				if (PacketReceiveFragment(port) != STATUS_OK)
					status = STATUS_ERROR;
			}

			if (FD_ISSET(port->sock, &wmask))
			{
				if (DebugLvl > 1)
					fprintf(stderr, "%s: ServerLoop:\t\thandling writing %d\n",
							progname, port->sock);

				if (PacketSendFragment(port) != STATUS_OK)
					status = STATUS_ERROR;
			}

			/* Get this before the connection might be closed. */

			next = DLGetSucc(curr);

			/*
			 * If there is no error and no outstanding data transfer going
			 * on, then the authentication handshake must be complete to
			 * the postmaster's satisfaction.  So, start the backend.
			 */

			if (status == STATUS_OK && port->pktInfo.state == Idle)
			{

				/*
				 * Can't start backend if max backend count is exceeded.
				 *
				 * The same when shutdowning data base.
				 */
				if (Shutdown > NoShutdown)
					PacketSendError(&port->pktInfo,
								"The Data Base System is shutting down");
				else if (StartupPID)
					PacketSendError(&port->pktInfo,
								  "The Data Base System is starting up");
				else if (FatalError)
					PacketSendError(&port->pktInfo,
							 "The Data Base System is in recovery mode");
				else if (CountChildren() >= MaxBackends)
					PacketSendError(&port->pktInfo,
									"Sorry, too many clients already");
				else
				{

					/*
					 * If the backend start fails then keep the connection
					 * open to report it.  Otherwise, pretend there is an
					 * error to close the connection which will now be
					 * managed by the backend.
					 */
					if (BackendStartup(port) != STATUS_OK)
						PacketSendError(&port->pktInfo,
										"Backend startup failed");
					else
						status = STATUS_ERROR;
				}
			}

			/* Close the connection if required. */

			if (status != STATUS_OK)
			{
				StreamClose(port->sock);
				DLRemove(curr);
				ConnFree(port);
				DLFreeElem(curr);
			}
			else
			{
				/* Set the masks for this connection. */

				if (nSockets <= port->sock)
					nSockets = port->sock + 1;

				if (port->pktInfo.state == WritingPacket)
					FD_SET(port->sock, &writemask);
				else
					FD_SET(port->sock, &readmask);
			}

			curr = next;
		}

		if (got_SIGHUP)
		{
			got_SIGHUP = false;
			ProcessConfigFile(PGC_SIGHUP);
		}
	}
}


/*
 * Initialise the read and write masks for select() for the well-known ports
 * we are listening on.  Return the number of sockets to listen on.
 */

static int
initMasks(fd_set *rmask, fd_set *wmask)
{
	int			nsocks = -1;

	FD_ZERO(rmask);
	FD_ZERO(wmask);

#if !defined(__CYGWIN32__) && !defined(__QNX__)
	if (ServerSock_UNIX != INVALID_SOCK)
	{
		FD_SET(ServerSock_UNIX, rmask);

		if (ServerSock_UNIX > nsocks)
			nsocks = ServerSock_UNIX;
	}
#endif

	if (ServerSock_INET != INVALID_SOCK)
	{
		FD_SET(ServerSock_INET, rmask);

		if (ServerSock_INET > nsocks)
			nsocks = ServerSock_INET;
	}

	return nsocks + 1;
}


/*
 * Called when the startup packet has been read.
 */

static int
readStartupPacket(void *arg, PacketLen len, void *pkt)
{
	Port	   *port;
	StartupPacket *si;

	port = (Port *) arg;
	si = (StartupPacket *) pkt;

	/*
	 * The first field is either a protocol version number or a special
	 * request code.
	 */

	port->proto = ntohl(si->protoVersion);

	if (port->proto == CANCEL_REQUEST_CODE)
		return processCancelRequest(port, len, pkt);

	if (port->proto == NEGOTIATE_SSL_CODE)
	{
		char		SSLok;

#ifdef USE_SSL
		SSLok = 'S';			/* Support for SSL */
#else
		SSLok = 'N';			/* No support for SSL */
#endif
		if (send(port->sock, &SSLok, 1, 0) != 1)
		{
			perror("Failed to send SSL negotiation response");
			return STATUS_ERROR;/* Close connection */
		}

#ifdef USE_SSL
		if (!(port->ssl = SSL_new(SSL_context)) ||
			!SSL_set_fd(port->ssl, port->sock) ||
			SSL_accept(port->ssl) <= 0)
		{
			fprintf(stderr, "Failed to initialize SSL connection: %s, errno: %d (%s)\n",
					ERR_reason_error_string(ERR_get_error()), errno, strerror(errno));
			return STATUS_ERROR;
		}
#endif
		/* ready for the normal startup packet */
		PacketReceiveSetup(&port->pktInfo,
						   readStartupPacket,
						   (void *) port);
		return STATUS_OK;		/* Do not close connection */
	}

	/* Could add additional special packet types here */

#ifdef USE_SSL

	/*
	 * Any SSL negotiation must have taken place here, so drop the
	 * connection ASAP if we require SSL
	 */
	if (SecureNetServer && !port->ssl)
	{
		PacketSendError(&port->pktInfo, "Backend requires secure connection.");
		return STATUS_OK;
	}
#endif

	/* Check we can handle the protocol the frontend is using. */

	if (PG_PROTOCOL_MAJOR(port->proto) < PG_PROTOCOL_MAJOR(PG_PROTOCOL_EARLIEST) ||
		PG_PROTOCOL_MAJOR(port->proto) > PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST) ||
		(PG_PROTOCOL_MAJOR(port->proto) == PG_PROTOCOL_MAJOR(PG_PROTOCOL_LATEST) &&
		 PG_PROTOCOL_MINOR(port->proto) > PG_PROTOCOL_MINOR(PG_PROTOCOL_LATEST)))
	{
		PacketSendError(&port->pktInfo, "Unsupported frontend protocol.");
		return STATUS_OK;		/* don't close the connection yet */
	}

	/*
	 * Get the parameters from the startup packet as C strings.  The
	 * packet destination was cleared first so a short packet has zeros
	 * silently added and a long packet is silently truncated.
	 */

	StrNCpy(port->database, si->database, sizeof(port->database));
	StrNCpy(port->user, si->user, sizeof(port->user));
	StrNCpy(port->options, si->options, sizeof(port->options));
	StrNCpy(port->tty, si->tty, sizeof(port->tty));

	/* The database defaults to the user name. */

	if (port->database[0] == '\0')
		StrNCpy(port->database, si->user, sizeof(port->database));

	/* Check a user name was given. */

	if (port->user[0] == '\0')
	{
		PacketSendError(&port->pktInfo,
					"No Postgres username specified in startup packet.");
		return STATUS_OK;		/* don't close the connection yet */
	}

	/* Start the authentication itself. */

	be_recvauth(port);

	return STATUS_OK;			/* don't close the connection yet */
}

/*
 * The client has sent a cancel request packet, not a normal
 * start-a-new-backend packet.	Perform the necessary processing.
 * Note that in any case, we return STATUS_ERROR to close the
 * connection immediately.	Nothing is sent back to the client.
 */

static int
processCancelRequest(Port *port, PacketLen len, void *pkt)
{
	CancelRequestPacket *canc = (CancelRequestPacket *) pkt;
	int			backendPID;
	long		cancelAuthCode;
	Dlelem	   *curr;
	Backend    *bp;

	backendPID = (int) ntohl(canc->backendPID);
	cancelAuthCode = (long) ntohl(canc->cancelAuthCode);

	/* See if we have a matching backend */

	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		bp = (Backend *) DLE_VAL(curr);
		if (bp->pid == backendPID)
		{
			if (bp->cancel_key == cancelAuthCode)
			{
				/* Found a match; signal that backend to cancel current op */
				if (DebugLvl)
					fprintf(stderr, "%s: processCancelRequest: sending SIGINT to process %d\n",
							progname, bp->pid);
				kill(bp->pid, SIGINT);
			}
			else
			{
				/* Right PID, wrong key: no way, Jose */
				if (DebugLvl)
					fprintf(stderr, "%s: processCancelRequest: bad key in cancel request for process %d\n",
							progname, bp->pid);
			}
			return STATUS_ERROR;
		}
	}

	/* No matching backend */
	if (DebugLvl)
		fprintf(stderr, "%s: processCancelRequest: bad PID in cancel request for process %d\n",
				progname, backendPID);

	return STATUS_ERROR;
}


/*
 * ConnCreate -- create a local connection data structure
 */
static Port *
ConnCreate(int serverFd)
{
	Port	   *port;

	if (!(port = (Port *) calloc(1, sizeof(Port))))
	{
		fprintf(stderr, "%s: ConnCreate: malloc failed\n",
				progname);
		SignalChildren(SIGUSR1);
		ExitPostmaster(1);
	}

	if (StreamConnection(serverFd, port) != STATUS_OK)
	{
		StreamClose(port->sock);
		ConnFree(port);
		port = NULL;
	}
	else
	{
		DLAddHead(PortList, DLNewElem(port));
		RandomSalt(port->salt);
		port->pktInfo.state = Idle;
	}

	return port;
}

/*
 * ConnFree -- free a local connection data structure
 */
static void
ConnFree(Port *conn)
{
#ifdef USE_SSL
	if (conn->ssl)
		SSL_free(conn->ssl);
#endif
	free(conn);
}

/*
 * reset_shared -- reset shared memory and semaphores
 */
static void
reset_shared(int port)
{
	ipc_key = port * 1000 + shmem_seq * 100;
	CreateSharedMemoryAndSemaphores(ipc_key, MaxBackends);
	shmem_seq += 1;
	if (shmem_seq >= 10)
		shmem_seq -= 10;
}


/*
 * set flag is SIGHUP was detected so config file can be reread in
 * main loop
 */
static void
SIGHUP_handler(SIGNAL_ARGS)
{
	got_SIGHUP = true;
	if (Shutdown > SmartShutdown)
		return;
	got_SIGHUP = true;
	SignalChildren(SIGHUP);
}



/*
 * pmdie -- signal handler for cleaning up after a kill signal.
 */
static void
pmdie(SIGNAL_ARGS)
{
	PG_SETMASK(&BlockSig);

	if (DebugLvl >= 1)
		elog(DEBUG, "pmdie %d", postgres_signal_arg);

	switch (postgres_signal_arg)
	{
		case SIGUSR2:

			/*
			 * Send SIGUSR2 to all children (AsyncNotifyHandler)
			 */
			if (Shutdown > SmartShutdown)
				return;
			SignalChildren(SIGUSR2);
			return;

		case SIGTERM:

			/*
			 * Smart Shutdown:
			 *
			 * let children to end their work and ShutdownDataBase.
			 */
			if (Shutdown >= SmartShutdown)
				return;
			Shutdown = SmartShutdown;
			tnow = time(NULL);
			fprintf(stderr, "Smart Shutdown request at %s", ctime(&tnow));
			fflush(stderr);
			if (DLGetHead(BackendList)) /* let reaper() handle this */
				return;

			/*
			 * No children left. Shutdown data base system.
			 */
			if (StartupPID > 0 || FatalError)	/* let reaper() handle
												 * this */
				return;
			if (ShutdownPID > 0)
				abort();

			ShutdownPID = ShutdownDataBase();
			return;

		case SIGINT:

			/*
			 * Fast Shutdown:
			 *
			 * abort all children with SIGTERM (rollback active transactions
			 * and exit) and ShutdownDataBase.
			 */
			if (Shutdown >= FastShutdown)
				return;
			tnow = time(NULL);
			fprintf(stderr, "Fast Shutdown request at %s", ctime(&tnow));
			fflush(stderr);
			if (DLGetHead(BackendList)) /* let reaper() handle this */
			{
				Shutdown = FastShutdown;
				if (!FatalError)
				{
					fprintf(stderr, "Aborting any active transaction...\n");
					fflush(stderr);
					SignalChildren(SIGTERM);
				}
				return;
			}
			if (Shutdown > NoShutdown)
			{
				Shutdown = FastShutdown;
				return;
			}
			Shutdown = FastShutdown;

			/*
			 * No children left. Shutdown data base system.
			 */
			if (StartupPID > 0 || FatalError)	/* let reaper() handle
												 * this */
				return;
			if (ShutdownPID > 0)
				abort();

			ShutdownPID = ShutdownDataBase();
			return;

		case SIGQUIT:

			/*
			 * Immediate Shutdown:
			 *
			 * abort all children with SIGUSR1 and exit without attempt to
			 * properly shutdown data base system.
			 */
			tnow = time(NULL);
			fprintf(stderr, "Immediate Shutdown request at %s", ctime(&tnow));
			fflush(stderr);
			if (ShutdownPID > 0)
				kill(ShutdownPID, SIGQUIT);
			else if (StartupPID > 0)
				kill(StartupPID, SIGQUIT);
			else if (DLGetHead(BackendList))
				SignalChildren(SIGUSR1);
			break;
	}

	/* exit postmaster */
	proc_exit(0);
}

/*
 * Reaper -- signal handler to cleanup after a backend (child) dies.
 */
static void
reaper(SIGNAL_ARGS)
{
/* GH: replace waitpid for !HAVE_WAITPID. Does this work ? */
#ifdef HAVE_WAITPID
	int			status;			/* backend exit status */

#else
	union wait	status;			/* backend exit status */

#endif
	int			exitstatus;
	int			pid;			/* process id of dead backend */

	PG_SETMASK(&BlockSig);

	if (DebugLvl)
		fprintf(stderr, "%s: reaping dead processes...\n",
				progname);
#ifdef HAVE_WAITPID
	while ((pid = waitpid(-1, &status, WNOHANG)) > 0)
	{
		exitstatus = status;
#else
	while ((pid = wait3(&status, WNOHANG, NULL)) > 0)
	{
		exitstatus = status.w_status;
#endif
		if (ShutdownPID > 0)
		{
			if (pid != ShutdownPID)
				abort();
			if (exitstatus != 0)
			{
				fprintf(stderr, "Shutdown failed - abort\n");
				fflush(stderr);
				proc_exit(1);
			}
			proc_exit(0);
		}
		if (StartupPID > 0)
		{
			if (pid != StartupPID)
				abort();
			if (exitstatus != 0)
			{
				fprintf(stderr, "Startup failed - abort\n");
				fflush(stderr);
				proc_exit(1);
			}
			StartupPID = 0;
			FatalError = false;
			if (Shutdown > NoShutdown)
			{
				if (ShutdownPID > 0)
					abort();
				ShutdownPID = ShutdownDataBase();
			}
			pqsignal(SIGCHLD, reaper);
			return;
		}
		CleanupProc(pid, exitstatus);
	}
	pqsignal(SIGCHLD, reaper);

	if (FatalError)
	{

		/*
		 * Wait for all children exit then StartupDataBase.
		 */
		if (DLGetHead(BackendList))
			return;
		if (StartupPID > 0 || ShutdownPID > 0)
			return;
		tnow = time(NULL);
		fprintf(stderr, "Server processes were terminated at %s"
				"Reinitializing shared memory and semaphores\n",
				ctime(&tnow));
		fflush(stderr);
		shmem_exit(0);
		reset_shared(PostPortName);
		StartupPID = StartupDataBase();
		return;
	}

	if (Shutdown > NoShutdown)
	{
		if (DLGetHead(BackendList))
			return;
		if (StartupPID > 0 || ShutdownPID > 0)
			return;
		ShutdownPID = ShutdownDataBase();
	}

}

/*
 * CleanupProc -- cleanup after terminated backend.
 *
 * Remove all local state associated with backend.
 *
 * Dillon's note: should log child's exit status in the system log.
 */
static void
CleanupProc(int pid,
			int exitstatus)		/* child's exit status. */
{
	Dlelem	   *curr,
			   *next;
	Backend    *bp;
	int			sig;

	if (DebugLvl)
	{
		fprintf(stderr, "%s: CleanupProc: pid %d exited with status %d\n",
				progname, pid, exitstatus);
	}

	/*
	 * If a backend dies in an ugly way (i.e. exit status not 0) then we
	 * must signal all other backends to quickdie.	If exit status is zero
	 * we assume everything is hunky dory and simply remove the backend
	 * from the active backend list.
	 */
	if (!exitstatus)
	{
		curr = DLGetHead(BackendList);
		while (curr)
		{
			bp = (Backend *) DLE_VAL(curr);
			if (bp->pid == pid)
			{
				DLRemove(curr);
				free(bp);
				DLFreeElem(curr);
				break;
			}
			curr = DLGetSucc(curr);
		}

		ProcRemove(pid);

		return;
	}

	if (!FatalError)
	{
		tnow = time(NULL);
		fprintf(stderr, "Server process (pid %d) exited with status %d at %s"
				"Terminating any active server processes...\n",
				pid, exitstatus, ctime(&tnow));
		fflush(stderr);
	}
	FatalError = true;
	curr = DLGetHead(BackendList);
	while (curr)
	{
		next = DLGetSucc(curr);
		bp = (Backend *) DLE_VAL(curr);

		/*
		 * SIGUSR1 is the special signal that says exit without proc_exit
		 * and let the user know what's going on. ProcSemaphoreKill()
		 * cleans up the backends semaphore.  If SendStop is set (-s on
		 * command line), then we send a SIGSTOP so that we can core dumps
		 * from all backends by hand.
		 */
		sig = (SendStop) ? SIGSTOP : SIGUSR1;
		if (bp->pid != pid)
		{
			if (DebugLvl)
				fprintf(stderr, "%s: CleanupProc: sending %s to process %d\n",
						progname,
						(sig == SIGUSR1)
						? "SIGUSR1" : "SIGSTOP",
						bp->pid);
			kill(bp->pid, sig);
		}
		else
		{

			/*
			 * I don't like that we call ProcRemove() here, assuming that
			 * shmem may be corrupted! But is there another way to free
			 * backend semaphores? Actually, I believe that we need not in
			 * per backend semaphore at all (we use them to wait on lock
			 * only, couldn't we just sigpause?), so probably we'll remove
			 * this call from here someday.  -- vadim 04-10-1999
			 */
			ProcRemove(pid);

			DLRemove(curr);
			free(bp);
			DLFreeElem(curr);
		}
		curr = next;
	}

}

/*
 * Send a signal to all chidren processes.
 */
static void
SignalChildren(int signal)
{
	Dlelem	   *curr,
			   *next;
	Backend    *bp;
	int			mypid = getpid();

	curr = DLGetHead(BackendList);
	while (curr)
	{
		next = DLGetSucc(curr);
		bp = (Backend *) DLE_VAL(curr);

		if (bp->pid != mypid)
		{
			if (DebugLvl >= 1)
				elog(DEBUG, "SignalChildren: sending signal %d to process %d",
					 signal, bp->pid);

			kill(bp->pid, signal);
		}

		curr = next;
	}
}

/*
 * BackendStartup -- start backend process
 *
 * returns: STATUS_ERROR if the fork/exec failed, STATUS_OK
 *		otherwise.
 *
 */
static int
BackendStartup(Port *port)
{
	Backend    *bn;				/* for backend cleanup */
	int			pid,
				i;

#ifdef CYR_RECODE
#define NR_ENVIRONMENT_VBL 6
	char		ChTable[80];

#else
#define NR_ENVIRONMENT_VBL 5
#endif

	static char envEntry[NR_ENVIRONMENT_VBL][2 * ARGV_SIZE];

	for (i = 0; i < NR_ENVIRONMENT_VBL; ++i)
		MemSet(envEntry[i], 0, 2 * ARGV_SIZE);

	/*
	 * Set up the necessary environment variables for the backend This
	 * should really be some sort of message....
	 */
	sprintf(envEntry[0], "POSTPORT=%d", PostPortName);
	putenv(envEntry[0]);
	sprintf(envEntry[1], "POSTID=%d", NextBackendTag);
	putenv(envEntry[1]);
	sprintf(envEntry[2], "PG_USER=%s", port->user);
	putenv(envEntry[2]);
	sprintf(envEntry[3], "PGDATA=%s", DataDir);
	putenv(envEntry[3]);
	sprintf(envEntry[4], "IPC_KEY=%d", ipc_key);
	putenv(envEntry[4]);

#ifdef CYR_RECODE
	GetCharSetByHost(ChTable, port->raddr.in.sin_addr.s_addr, DataDir);
	if (*ChTable != '\0')
	{
		sprintf(envEntry[5], "PG_RECODETABLE=%s", ChTable);
		putenv(envEntry[5]);
	}
#endif

	/*
	 * Compute the cancel key that will be assigned to this backend. The
	 * backend will have its own copy in the forked-off process' value of
	 * MyCancelKey, so that it can transmit the key to the frontend.
	 */
	MyCancelKey = PostmasterRandom();

	if (DebugLvl > 2)
	{
		char	  **p;
		extern char **environ;

		fprintf(stderr, "%s: BackendStartup: environ dump:\n",
				progname);
		fprintf(stderr, "-----------------------------------------\n");
		for (p = environ; *p; ++p)
			fprintf(stderr, "\t%s\n", *p);
		fprintf(stderr, "-----------------------------------------\n");
	}

	/*
	 * Flush stdio channels just before fork, to avoid double-output
	 * problems. Ideally we'd use fflush(NULL) here, but there are still a
	 * few non-ANSI stdio libraries out there (like SunOS 4.1.x) that
	 * coredump if we do. Presently stdout and stderr are the only stdio
	 * output channels used by the postmaster, so fflush'ing them should
	 * be sufficient.
	 */
	fflush(stdout);
	fflush(stderr);

	if ((pid = fork()) == 0)
	{							/* child */
		if (DoBackend(port))
		{
			fprintf(stderr, "%s child[%d]: BackendStartup: backend startup failed\n",
					progname, (int) getpid());
			exit(1);
		}
		else
			exit(0);
	}

	/* in parent */
	if (pid < 0)
	{
		fprintf(stderr, "%s: BackendStartup: fork failed: %s\n",
				progname, strerror(errno));
		return STATUS_ERROR;
	}

	if (DebugLvl)
		fprintf(stderr, "%s: BackendStartup: pid %d user %s db %s socket %d\n",
				progname, pid, port->user, port->database,
				port->sock);

	/* Generate a new backend tag for every backend we start */

	/*
	 * XXX theoretically this could wrap around, if you have the patience
	 * to start 2^31 backends ...
	 */
	NextBackendTag -= 1;

	/*
	 * Everything's been successful, it's safe to add this backend to our
	 * list of backends.
	 */
	if (!(bn = (Backend *) calloc(1, sizeof(Backend))))
	{
		fprintf(stderr, "%s: BackendStartup: malloc failed\n",
				progname);
		ExitPostmaster(1);
	}

	bn->pid = pid;
	bn->cancel_key = MyCancelKey;
	DLAddHead(BackendList, DLNewElem(bn));

	return STATUS_OK;
}

/*
 * split_opts -- split a string of options and append it to an argv array
 *
 * NB: the string is destructively modified!
 *
 * Since no current POSTGRES arguments require any quoting characters,
 * we can use the simple-minded tactic of assuming each set of space-
 * delimited characters is a separate argv element.
 *
 * If you don't like that, well, we *used* to pass the whole option string
 * as ONE argument to execl(), which was even less intelligent...
 */
static void
split_opts(char **argv, int *argcp, char *s)
{
	while (s && *s)
	{
		while (isspace(*s))
			++s;
		if (*s == '\0')
			break;
		argv[(*argcp)++] = s;
		while (*s && !isspace(*s))
			++s;
		if (*s)
			*s++ = '\0';
	}
}

/*
 * DoBackend -- set up the backend's argument list and invoke backend main().
 *
 * This used to perform an execv() but we no longer exec the backend;
 * it's the same executable as the postmaster.
 *
 * returns:
 *		Shouldn't return at all.
 *		If PostgresMain() fails, return status.
 */
static int
DoBackend(Port *port)
{
	char	   *av[ARGV_SIZE * 2];
	int			ac = 0;
	char		debugbuf[ARGV_SIZE];
	char		protobuf[ARGV_SIZE];
	char		dbbuf[ARGV_SIZE];
	char		optbuf[ARGV_SIZE];
	char		ttybuf[ARGV_SIZE];
	int			i;
	struct timeval now;
	struct timezone tz;

	/*
	 * Let's clean up ourselves as the postmaster child
	 */

	/* We don't want the postmaster's proc_exit() handlers */
	on_exit_reset();

	/*
	 * Signal handlers setting is moved to tcop/postgres...
	 */

	/* Close the postmaster sockets */
	if (NetServer)
		StreamClose(ServerSock_INET);
	ServerSock_INET = INVALID_SOCK;
#if !defined(__CYGWIN32__) && !defined(__QNX__)
	StreamClose(ServerSock_UNIX);
	ServerSock_UNIX = INVALID_SOCK;
#endif

	/* Save port etc. for ps status */
	MyProcPort = port;

	MyProcPid = getpid();

	/*
	 * Don't want backend to be able to see the postmaster random number
	 * generator state.  We have to clobber the static random_seed *and*
	 * start a new random sequence in the random() library function.
	 */
	random_seed = 0;
	gettimeofday(&now, &tz);
	srandom(now.tv_usec);

	/* ----------------
	 * Now, build the argv vector that will be given to PostgresMain.
	 *
	 * The layout of the command line is
	 *		postgres [secure switches] -p databasename [insecure switches]
	 * where the switches after -p come from the client request.
	 * ----------------
	 */

	av[ac++] = "postgres";

	/*
	 * Pass the requested debugging level along to the backend. Level one
	 * debugging in the postmaster traces postmaster connection activity,
	 * and levels two and higher are passed along to the backend.  This
	 * allows us to watch only the postmaster or the postmaster and the
	 * backend.
	 */
	if (DebugLvl > 1)
	{
		sprintf(debugbuf, "-d%d", DebugLvl);
		av[ac++] = debugbuf;
	}

	/*
	 * Pass any backend switches specified with -o in the postmaster's own
	 * command line.  We assume these are secure. (It's OK to mangle
	 * ExtraOptions since we are now in the child process; this won't
	 * change the postmaster's copy.)
	 */
	split_opts(av, &ac, ExtraOptions);

	/* Tell the backend what protocol the frontend is using. */
	sprintf(protobuf, "-v%u", port->proto);
	av[ac++] = protobuf;

	/*
	 * Tell the backend it is being called from the postmaster, and which
	 * database to use.  -p marks the end of secure switches.
	 */
	av[ac++] = "-p";

	StrNCpy(dbbuf, port->database, ARGV_SIZE);
	av[ac++] = dbbuf;

	/*
	 * Pass the (insecure) option switches from the connection request.
	 */
	StrNCpy(optbuf, port->options, ARGV_SIZE);
	split_opts(av, &ac, optbuf);

	/*
	 * Pass the (insecure) debug output file request.
	 *
	 * NOTE: currently, this is useless code, since the backend will not
	 * honor an insecure -o switch.  I left it here since the backend
	 * could be modified to allow insecure -o, given adequate checking
	 * that the specified filename is something safe to write on.
	 */
	if (port->tty[0])
	{
		StrNCpy(ttybuf, port->tty, ARGV_SIZE);
		av[ac++] = "-o";
		av[ac++] = ttybuf;
	}

	av[ac] = (char *) NULL;

	if (DebugLvl > 1)
	{
		fprintf(stderr, "%s child[%d]: starting with (",
				progname, MyProcPid);
		for (i = 0; i < ac; ++i)
			fprintf(stderr, "%s ", av[i]);
		fprintf(stderr, ")\n");
	}

	return (PostgresMain(ac, av, real_argc, real_argv));
}

/*
 * ExitPostmaster -- cleanup
 */
static void
ExitPostmaster(int status)
{
	/* should cleanup shared memory and kill all backends */

	/*
	 * Not sure of the semantics here.	When the Postmaster dies, should
	 * the backends all be killed? probably not.
	 *
	 * MUST		-- vadim 05-10-1999
	 */
	if (ServerSock_INET != INVALID_SOCK)
		StreamClose(ServerSock_INET);
	ServerSock_INET = INVALID_SOCK;
#if !defined(__CYGWIN32__) && !defined(__QNX__)
	if (ServerSock_UNIX != INVALID_SOCK)
		StreamClose(ServerSock_UNIX);
	ServerSock_UNIX = INVALID_SOCK;
#endif

	proc_exit(status);
}

static void
dumpstatus(SIGNAL_ARGS)
{
	Dlelem	   *curr;

	PG_SETMASK(&BlockSig);

	curr = DLGetHead(PortList);
	while (curr)
	{
		Port	   *port = DLE_VAL(curr);

		fprintf(stderr, "%s: dumpstatus:\n", progname);
		fprintf(stderr, "\tsock %d\n", port->sock);
		curr = DLGetSucc(curr);
	}
}

/*
 * CharRemap
 */
static char
CharRemap(long int ch)
{

	if (ch < 0)
		ch = -ch;

	ch = ch % 62;
	if (ch < 26)
		return 'A' + ch;

	ch -= 26;
	if (ch < 26)
		return 'a' + ch;

	ch -= 26;
	return '0' + ch;
}

/*
 * RandomSalt
 */
static void
RandomSalt(char *salt)
{
	long		rand = PostmasterRandom();

	*salt = CharRemap(rand % 62);
	*(salt + 1) = CharRemap(rand / 62);
}

/*
 * PostmasterRandom
 */
static long
PostmasterRandom(void)
{

	static bool initialized = false;

	if (!initialized)
	{
		Assert(random_seed != 0 && !IsUnderPostmaster);
		srandom(random_seed);
		initialized = true;
	}

	return random() ^ random_seed;
}

/*
 * Count up number of child processes.
 */
static int
CountChildren(void)
{
	Dlelem	   *curr;
	Backend    *bp;
	int			mypid = getpid();
	int			cnt = 0;

	for (curr = DLGetHead(BackendList); curr; curr = DLGetSucc(curr))
	{
		bp = (Backend *) DLE_VAL(curr);
		if (bp->pid != mypid)
			cnt++;
	}
	return cnt;
}

#ifdef USE_SSL
/*
 * Initialize SSL library and structures
 */
static void
InitSSL(void)
{
	char		fnbuf[2048];

	SSL_load_error_strings();
	SSL_library_init();
	SSL_context = SSL_CTX_new(SSLv23_method());
	if (!SSL_context)
	{
		fprintf(stderr, "Failed to create SSL context: %s\n", ERR_reason_error_string(ERR_get_error()));
		exit(1);
	}
	snprintf(fnbuf, sizeof(fnbuf), "%s/server.crt", DataDir);
	if (!SSL_CTX_use_certificate_file(SSL_context, fnbuf, SSL_FILETYPE_PEM))
	{
		fprintf(stderr, "Failed to load server certificate (%s): %s\n", fnbuf, ERR_reason_error_string(ERR_get_error()));
		exit(1);
	}
	snprintf(fnbuf, sizeof(fnbuf), "%s/server.key", DataDir);
	if (!SSL_CTX_use_PrivateKey_file(SSL_context, fnbuf, SSL_FILETYPE_PEM))
	{
		fprintf(stderr, "Failed to load private key file (%s): %s\n", fnbuf, ERR_reason_error_string(ERR_get_error()));
		exit(1);
	}
	if (!SSL_CTX_check_private_key(SSL_context))
	{
		fprintf(stderr, "Check of private key failed: %s\n", ERR_reason_error_string(ERR_get_error()));
		exit(1);
	}
}

#endif

static pid_t
SSDataBase(bool startup)
{
	pid_t		pid;
	int			i;
	static char ssEntry[4][2 * ARGV_SIZE];

	for (i = 0; i < 4; ++i)
		MemSet(ssEntry[i], 0, 2 * ARGV_SIZE);

	sprintf(ssEntry[0], "POSTPORT=%d", PostPortName);
	putenv(ssEntry[0]);
	sprintf(ssEntry[1], "POSTID=%d", NextBackendTag);
	putenv(ssEntry[1]);
	sprintf(ssEntry[2], "PGDATA=%s", DataDir);
	putenv(ssEntry[2]);
	sprintf(ssEntry[3], "IPC_KEY=%d", ipc_key);
	putenv(ssEntry[3]);

	fflush(stdout);
	fflush(stderr);

	if ((pid = fork()) == 0)	/* child */
	{
		char	   *av[ARGV_SIZE * 2];
		int			ac = 0;
		char		nbbuf[ARGV_SIZE];
		char		dbbuf[ARGV_SIZE];

		/* Lose the postmaster's on-exit routines and port connections */
		on_exit_reset();

		if (NetServer)
			StreamClose(ServerSock_INET);
		ServerSock_INET = INVALID_SOCK;
#if !defined(__CYGWIN32__) && !defined(__QNX__)
		StreamClose(ServerSock_UNIX);
		ServerSock_UNIX = INVALID_SOCK;
#endif

		av[ac++] = "postgres";

		av[ac++] = "-d";

		sprintf(nbbuf, "-B%u", NBuffers);
		av[ac++] = nbbuf;

		if (startup)
			av[ac++] = "-x";

		av[ac++] = "-p";

		StrNCpy(dbbuf, "template1", ARGV_SIZE);
		av[ac++] = dbbuf;

		av[ac] = (char *) NULL;

		optind = 1;

		pqsignal(SIGQUIT, SIG_DFL);
#ifdef HAVE_SIGPROCMASK
		sigdelset(&BlockSig, SIGQUIT);
#else
		BlockSig &= ~(sigmask(SIGQUIT));
#endif
		PG_SETMASK(&BlockSig);

		BootstrapMain(ac, av);
		exit(0);
	}

	/* in parent */
	if (pid < 0)
	{
		fprintf(stderr, "%s Data Base: fork failed: %s\n",
				((startup) ? "Startup" : "Shutdown"), strerror(errno));
		ExitPostmaster(1);
	}

	NextBackendTag -= 1;

	return (pid);
}

/*
 * Create the opts file
 */
static int
SetOptsFile(char *progname, int port, char *datadir,
			int assert, int nbuf,
			int debuglvl, int netserver,
#ifdef USE_SSL
			int securenetserver,
#endif
			int maxbackends, int reinit,
			int silent, int sendstop, char *extraoptions)
{
	int			fd;
	char		optsfile[MAXPGPATH];
	char		opts[1024];
	char		buf[1024];

	/*
	 * Creating opts file
	 */
	snprintf(optsfile, sizeof(optsfile), "%s/%s", datadir, OPTSFNAME);
	fd = open(optsfile, O_RDWR | O_TRUNC | O_CREAT, 0600);
	if (fd < 0)
	{
		fprintf(stderr, "Can't create optsfile:%s", optsfile);
		return (-1);
	}
	snprintf(opts, sizeof(opts), "%s\n-p %d\n-D %s\n", progname, port, datadir);
	if (assert)
	{
		sprintf(buf, "-A %d\n", assert);
		strcat(opts, buf);
	}

	snprintf(buf, sizeof(buf), "-B %d\n", nbuf);
	strcat(opts, buf);

	if (debuglvl)
	{
		sprintf(buf, "-d %d\n", debuglvl);
		strcat(opts, buf);
	}

	if (netserver)
		strcat(opts, "-i\n");

#ifdef USE_SSL
	if (securenetserver)
		strcat(opts, "-l\n");
#endif

	snprintf(buf, sizeof(buf), "-N %d\n", maxbackends);
	strcat(opts, buf);

	if (!reinit)
		strcat(opts, "-n\n");

	if (silent)
		strcat(opts, "-S\n");

	if (sendstop)
		strcat(opts, "-s\n");

	if (strlen(extraoptions) > 0)
	{
		strcat(opts, "-o '");
		strcat(opts, extraoptions);
		strcat(opts, "'");
	}

	if (write(fd, opts, strlen(opts)) != strlen(opts))
	{
		perror("Writing to opts file failed");
		close(fd);
		return (-1);
	}
	close(fd);

	return (0);
}
