<!--
$PostgreSQL: pgsql/doc/src/sgml/config.sgml,v 1.24 2005/10/03 22:55:50 tgl Exp $
-->
<chapter Id="runtime-config">
  <title>Run-time Configuration</title>

  <indexterm>
   <primary>configuration</primary>
   <secondary>of the server</secondary>
  </indexterm>

  <para>
   There are many configuration parameters that affect the behavior of
   the database system. In the first section of this chapter, we
   describe how to set configuration chapters. The subsequent sections
   discuss each parameter in detail.
  </para>

  <sect1 id="config-setting">
   <title>Setting Parameters</title>

   <para>
    All parameter names are case-insensitive. Every parameter takes a
    value of one of four types: boolean, integer, floating point,
    or string. Boolean values may be written as <literal>ON</literal>,
    <literal>OFF</literal>, <literal>TRUE</literal>,
    <literal>FALSE</literal>, <literal>YES</literal>,
    <literal>NO</literal>, <literal>1</literal>, <literal>0</literal>
    (all case-insensitive) or any unambiguous prefix of these.
   </para>

   <para>
    One way to set these parameters is to edit the file
    <filename>postgresql.conf</><indexterm><primary>postgresql.conf</></>,
    which is normally kept in the data directory. (<command>initdb</>
    installs a default copy there.) An example of what this file might look
    like is:
<programlisting>
# This is a comment
log_connections = yes
log_destination = 'syslog'
search_path = '$user, public'
</programlisting>
    One parameter is specified per line. The equal sign between name and
    value is optional. Whitespace is insignificant and blank lines are
    ignored. Hash marks (<literal>#</literal>) introduce comments
    anywhere.  Parameter values that are not simple identifiers or
    numbers must be single-quoted.  To embed a single quote in a parameter
    value, write either two quotes (preferred) or backslash-quote.
  </para>

   <para>
    <indexterm>
     <primary>SIGHUP</primary>
    </indexterm>
    The configuration file is reread whenever the
    <command>postmaster</command> process receives a
    <systemitem>SIGHUP</> signal (which is most easily sent by means
    of <literal>pg_ctl reload</>). The <command>postmaster</command>
    also propagates this signal to all currently running server
    processes so that existing sessions also get the new
    value. Alternatively, you can send the signal to a single server
    process directly.  Some parameters can only be set at server start;
    any changes to their entries in the configuration file will be ignored
    until the server is restarted.
   </para>

   <para>
    A second way to set these configuration parameters is to give them
    as a command line option to the <command>postmaster</command>, such as:
<programlisting>
postmaster -c log_connections=yes -c log_destination='syslog'
</programlisting>
    Command-line options override any conflicting settings in
    <filename>postgresql.conf</filename>.  Note that this means you won't
    be able to change the value on-the-fly by editing
    <filename>postgresql.conf</filename>, so while the command-line
    method may be convenient, it can cost you flexibility later.
   </para>

   <para>
    Occasionally it is useful to give a command line option to
    one particular session only. The environment variable
    <envar>PGOPTIONS</envar> can be used for this purpose on the
    client side:
<programlisting>
env PGOPTIONS='-c geqo=off' psql
</programlisting>
    (This works for any <application>libpq</>-based client application, not
    just <application>psql</application>.) Note that this won't work for
    parameters that are fixed when the server is started or that must be
    specified in <filename>postgresql.conf</filename>.
   </para>

   <para>
    Furthermore, it is possible to assign a set of option settings to
    a user or a database.  Whenever a session is started, the default
    settings for the user and database involved are loaded.  The
    commands <xref linkend="sql-alteruser" endterm="sql-alteruser-title">
    and <xref linkend="sql-alterdatabase" endterm="sql-alterdatabase-title">,
    respectively, are used to configure these settings.  Per-database
    settings override anything received from the
    <command>postmaster</command> command-line or the configuration
    file, and in turn are overridden by per-user settings; both are
    overridden by per-session options.
   </para>

   <para>
    Some parameters can be changed in individual <acronym>SQL</acronym>
    sessions with the <xref linkend="SQL-SET" endterm="SQL-SET-title">
    command, for example:
<screen>
SET ENABLE_SEQSCAN TO OFF;
</screen>
    If <command>SET</> is allowed, it overrides all other sources of
    values for the parameter. Some parameters cannot be changed via
    <command>SET</command>: for example, if they control behavior that
    cannot reasonably be changed without restarting
    <productname>PostgreSQL</productname>.  Also, some parameters can
    be modified via <command>SET</command> or <command>ALTER</> by superusers,
    but not by ordinary users.
   </para>

   <para>
    The <xref linkend="SQL-SHOW" endterm="SQL-SHOW-title">
    command allows inspection of the current values of all parameters.
   </para>

   <para>
    The virtual table <structname>pg_settings</structname>
    (described in <xref linkend="view-pg-settings">) also allows
    displaying and updating session run-time parameters.  It is equivalent
    to <command>SHOW</> and <command>SET</>, but can be more convenient
    to use because it can be joined with other tables, or selected from using
    any desired selection condition.
   </para>
  </sect1>

   <sect1 id="runtime-config-file-locations">
    <title>File Locations</title>

     <para>
      In addition to the <filename>postgresql.conf</filename> file
      already mentioned, <productname>PostgreSQL</productname> uses
      two other manually-edited configuration files, which control
      client authentication (their use is discussed in <xref
      linkend="client-authentication">).  By default, all three
      configuration files are stored in the database cluster's data
      directory.  The options described in this section allow the
      configuration files to be placed elsewhere.  (Doing so can ease
      administration.  In particular it is often easier to ensure that
      the configuration files are properly backed-up when they are
      kept separate.)
     </para>

     <variablelist>
     <varlistentry id="guc-data-directory" xreflabel="data_directory">
      <term><varname>data_directory</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>data_directory</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         Specifies the directory to use for data storage.
         This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-config-file" xreflabel="config_file">
      <term><varname>config_file</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>config_file</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         Specifies the main server configuration file
         (customarily called <filename>postgresql.conf</>).
         This option can only be set on the postmaster command line.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-hba-file" xreflabel="hba_file">
      <term><varname>hba_file</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>hba_file</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         Specifies the configuration file for host-based authentication
         (customarily called <filename>pg_hba.conf</>).
         This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-ident-file" xreflabel="ident_file">
      <term><varname>ident_file</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>ident_file</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         Specifies the configuration file for
         <application>ident</> authentication
         (customarily called <filename>pg_ident.conf</>).
         This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-external-pid-file" xreflabel="external_pid_file">
      <term><varname>external_pid_file</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>external_pid_file</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the name of an additional process-id (PID) file that the
        <application>postmaster</> should create for use by server
        administration programs.
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     </variablelist>

     <para>
      In a default installation, none of the above options are set explicitly.
      Instead, the
      data directory is specified by the <option>-D</option> command-line
      option or the <envar>PGDATA</envar> environment variable, and the
      configuration files are all found within the data directory.
     </para>

     <para>
      If you wish to keep the configuration files elsewhere than the
      data directory, the postmaster's <option>-D</option>
      command-line option or <envar>PGDATA</envar> environment variable
      must point to the directory containing the configuration files,
      and the <varname>data_directory</> option must be set in
      <filename>postgresql.conf</filename> (or on the command line) to show
      where the data directory is actually located.  Notice that
      <varname>data_directory</> overrides <option>-D</option> and
      <envar>PGDATA</envar> for the location
      of the data directory, but not for the location of the configuration
      files.
     </para>

     <para>
      If you wish, you can specify the configuration file names and locations
      individually using the options <varname>config_file</>,
      <varname>hba_file</> and/or <varname>ident_file</>.
      <varname>config_file</> can only be specified on the 
      <command>postmaster</command> command line, but the others can be
      set within the main configuration file.  If all three options plus
      <varname>data_directory</> are explicitly set, then it is not necessary
      to specify <option>-D</option> or <envar>PGDATA</envar>.
     </para>

     <para>
      When setting any of these options, a relative path will be interpreted
      with respect to the directory in which the <command>postmaster</command>
      is started.
     </para>
   </sect1>

   <sect1 id="runtime-config-connection">
    <title>Connections and Authentication</title>

    <sect2 id="runtime-config-connection-settings">
     <title>Connection Settings</title>

     <variablelist>

     <varlistentry id="guc-listen-addresses" xreflabel="listen_addresses">
      <term><varname>listen_addresses</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>listen_addresses</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         Specifies the TCP/IP address(es) on which the server is
         to listen for connections from client applications.  
         The value takes the form of a comma-separated list of host names
         and/or numeric IP addresses.  The special entry <literal>*</>
         corresponds to all available IP interfaces.
         If the list is empty, the server does not listen on any IP interface
         at all, in which case only Unix-domain sockets can be used to connect
         to it.
         The default value is <systemitem class="systemname">localhost</>,
         which allows only local <quote>loopback</> connections to be made.
         This parameter can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-port" xreflabel="port">
      <term><varname>port</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>port</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The TCP port the server listens on; 5432 by default.  Note that the
        same port number is used for all IP addresses the server listens on.
        This parameter can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-connections" xreflabel="max_connections">
      <term><varname>max_connections</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_connections</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Determines the maximum number of concurrent connections to the
        database server. The default is typically 100, but may be less
        if your kernel settings will not support it (as determined
        during <application>initdb</>).  This parameter can only be
        set at server start.
       </para>

       <para>
        Increasing this parameter may cause <productname>PostgreSQL</>
        to request more <systemitem class="osname">System V</> shared
        memory or semaphores than your operating system's default configuration
        allows. See <xref linkend="sysvipc"> for information on how to
        adjust those parameters, if necessary.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-superuser-reserved-connections"
     xreflabel="superuser_reserved_connections">
      <term><varname>superuser_reserved_connections</varname>
      (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>superuser_reserved_connections</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Determines the number of connection <quote>slots</quote> that
        are reserved for connections by <productname>PostgreSQL</>
        superusers.  At most <xref linkend="guc-max-connections">
        connections can ever be active simultaneously.  Whenever the
        number of active concurrent connections is at least
        <varname>max_connections</> minus
        <varname>superuser_reserved_connections</varname>, new
        connections will be accepted only for superusers.
       </para>

       <para>
        The default value is 2. The value must be less than the value of
        <varname>max_connections</varname>. This parameter can only be
        set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-unix-socket-directory" xreflabel="unix_socket_directory">
      <term><varname>unix_socket_directory</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>unix_socket_directory</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the directory of the Unix-domain socket on which the
        server is to listen for
        connections from client applications.  The default is normally
        <filename>/tmp</filename>, but can be changed at build time.
        This parameter can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-unix-socket-group" xreflabel="unix_socket_group">
      <term><varname>unix_socket_group</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>unix_socket_group</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the owning group of the Unix-domain socket.  (The owning
        user of the socket is always the user that starts the
        server.)  In combination with the option
        <varname>unix_socket_permissions</varname> this can be used as
        an additional access control mechanism for Unix-domain connections.
        By default this is the empty string, which uses the default
        group for the current user.  This option can only be set at
        server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-unix-socket-permissions" xreflabel="unix_socket_permissions">
      <term><varname>unix_socket_permissions</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>unix_socket_permissions</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the access permissions of the Unix-domain socket.  Unix-domain
        sockets use the usual Unix file system permission set.
        The option value is expected to be a numeric mode
        specification in the form accepted by the
        <function>chmod</function> and <function>umask</function>
        system calls.  (To use the customary octal format the number
        must start with a <literal>0</literal> (zero).)
       </para>

       <para>
        The default permissions are <literal>0777</literal>, meaning
        anyone can connect. Reasonable alternatives are
        <literal>0770</literal> (only user and group, see also
        <varname>unix_socket_group</varname>) and <literal>0700</literal>
        (only user). (Note that for a Unix-domain socket, only write
        permission matters and so there is no point in setting or revoking
        read or execute permissions.)
       </para>

       <para>
        This access control mechanism is independent of the one
        described in <xref linkend="client-authentication">.
       </para>

       <para>
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-bonjour-name" xreflabel="bonjour_name">
      <term><varname>bonjour_name</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>bonjour_name</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the <productname>Bonjour</productname> broadcast
        name.  By default, the computer name is used, specified as an
        empty string ''.  This option is ignored if the server was not
        compiled with <productname>Bonjour</productname> support.  This
        option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-tcp-keepalives-idle" xreflabel="tcp_keepalives_idle">
      <term><varname>tcp_keepalives_idle</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>tcp_keepalives_idle</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        On systems that support the TCP_KEEPIDLE socket option, specifies the
        number of seconds between sending keepalives on an otherwise idle
        connection. A value of 0 uses the system default. If TCP_KEEPIDLE is
        not supported, this parameter must be 0. This option is ignored for
        connections made via a Unix-domain socket.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-tcp-keepalives-interval" xreflabel="tcp_keepalives_interval">
      <term><varname>tcp_keepalives_interval</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>tcp_keepalives_interval</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        On systems that support the TCP_KEEPINTVL socket option, specifies how
        long, in seconds, to wait for a response to a keepalive before
        retransmitting. A value of 0 uses the system default. If TCP_KEEPINTVL
        is not supported, this parameter must be 0. This option is ignored
        for connections made via a Unix-domain socket.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-tcp-keepalives-count" xreflabel="tcp_keepalives_count">
      <term><varname>tcp_keepalives_count</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>tcp_keepalives_count</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        On systems that support the TCP_KEEPCNT socket option, specifies how
        many keepalives may be lost before the connection is considered dead. 
        A value of 0 uses the system default. If TCP_KEEPCNT is not
        supported, this parameter must be 0. This option is ignored
        for connections made via a Unix-domain socket.
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
     </sect2>
     <sect2 id="runtime-config-connection-security">
     <title>Security and Authentication</title>
     
     <variablelist>
     <varlistentry id="guc-authentication-timeout" xreflabel="authentication_timeout">
      <term><varname>authentication_timeout</varname> (<type>integer</type>)</term>
      <indexterm><primary>timeout</><secondary>client authentication</></indexterm>
      <indexterm><primary>client authentication</><secondary>timeout during</></indexterm>
      <indexterm>
       <primary><varname>authentication_timeout</> configuration parameter</primary>
      </indexterm>

      <listitem>
       <para>
        Maximum time to complete client authentication, in seconds. If a
        would-be client has not completed the authentication protocol in
        this much time, the server breaks the connection. This prevents
        hung clients from occupying a connection indefinitely. This
        option can only be set at server start or in the
        <filename>postgresql.conf</filename> file. The default is 60.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-ssl" xreflabel="ssl">
      <term><varname>ssl</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>ssl</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables <acronym>SSL</> connections. Please read
        <xref linkend="ssl-tcp"> before using this. The default
        is <literal>off</>. This parameter can only be set at server
        start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-password-encryption" xreflabel="password_encryption">
      <term><varname>password_encryption</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>password_encryption</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When a password is specified in <xref
        linkend="sql-createuser" endterm="sql-createuser-title"> or
        <xref linkend="sql-alteruser" endterm="sql-alteruser-title">
        without writing either <literal>ENCRYPTED</> or
        <literal>UNENCRYPTED</>, this option determines whether the
        password is to be encrypted. The default is <literal>on</>
        (encrypt the password).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-krb-server-keyfile" xreflabel="krb_server_keyfile">
      <term><varname>krb_server_keyfile</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>krb_server_keyfile</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the location of the Kerberos server key file. See
        <xref linkend="kerberos-auth"> for details. This parameter
        can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-krb-srvname" xreflabel="krb_srvname">
      <term><varname>krb_srvname</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>krb_srvname</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the Kerberos service name. See <xref linkend="kerberos-auth">
        for details.  This parameter can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-krb-server-hostname" xreflabel="krb_server_hostname">
      <term><varname>krb_server_hostname</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>krb_server_hostname</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the hostname part of the service principal.
        This, combined with <varname>krb_srvname</>, is used to generate
        the complete service principal, i.e.
        <varname>krb_server_hostname</><literal>/</><varname>krb_server_hostname</><literal>@</>REALM.
       </para>
       <para>
        If not set, the default is to allow any service principal matching an entry
        in the keytab.  See <xref linkend="kerberos-auth"> for details.
        This parameter can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-krb-caseins-users" xreflabel="krb_caseins_users">
      <term><varname>krb_caseins_users</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>krb_caseins_users</varname> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets if Kerberos usernames should be treated case-insensitively.
        The default is <literal>off</> (case sensitive). This parameter
        can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-db-user-namespace" xreflabel="db_user_namespace">
      <term><varname>db_user_namespace</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>db_user_namespace</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This enables per-database user names.  It is off by default.
       </para>

       <para>
        If this is on, you should create users as <literal>username@dbname</>.
        When <literal>username</> is passed by a connecting client,
        <literal>@</> and the database name are appended to the user
        name and that database-specific user name is looked up by the
        server. Note that when you create users with names containing
        <literal>@</> within the SQL environment, you will need to
        quote the user name.
       </para>

       <para>
        With this option enabled, you can still create ordinary global
        users.  Simply append <literal>@</> when specifying the user
        name in the client.  The <literal>@</> will be stripped off
        before the user name is looked up by the server.
       </para>

       <note>
        <para>
         This feature is intended as a temporary measure until a
         complete solution is found.  At that time, this option will
         be removed.
        </para>
       </note>
      </listitem>
     </varlistentry>

    </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-resource">
    <title>Resource Consumption</title>

    <sect2 id="runtime-config-resource-memory">
     <title>Memory</title>

     <variablelist>
     <varlistentry id="guc-shared-buffers" xreflabel="shared_buffers">
      <term><varname>shared_buffers</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>shared_buffers</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the number of shared memory buffers used by the database
        server. The default is typically 1000, but may be less if your
        kernel settings will not support it (as determined during
        <application>initdb</>).  Each buffer is 8192 bytes, unless a
        different value of <symbol>BLCKSZ</symbol> was chosen when building
        the server.  This setting must be at least 16, as well as at
        least twice the value of <xref linkend="guc-max-connections">;
        however, settings significantly higher than the minimum are
        usually needed for good performance.  Values of a few thousand
        are recommended for production installations.  This option can
        only be set at server start.
       </para>

       <para>
        Increasing this parameter may cause <productname>PostgreSQL</>
        to request more <systemitem class="osname">System V</> shared
        memory than your operating system's default configuration
        allows. See <xref linkend="sysvipc"> for information on how to
        adjust those parameters, if necessary.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-temp-buffers" xreflabel="temp_buffers">
      <term><varname>temp_buffers</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>temp_buffers</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the maximum number of temporary buffers used by each database
        session.  These are session-local buffers used only for access
        to temporary tables.  The default is 1000.  The setting can
        be changed within individual sessions, but only up until the
        first use of temporary tables within a session; subsequent
        attempts to change the value will have no effect on that session.
       </para>

       <para>
        A session will allocate temporary buffers as needed up to the limit
        given by <varname>temp_buffers</>.  The cost of setting a large
        value in sessions that do not actually need a lot of temporary
        buffers is only a buffer descriptor, or about 64 bytes, per
        increment in <varname>temp_buffers</>.  However if a buffer is
        actually used an additional 8192 bytes will be consumed for it
        (or in general, <symbol>BLCKSZ</symbol> bytes).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-prepared-transactions" xreflabel="max_prepared_transactions">
      <term><varname>max_prepared_transactions</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_prepared_transactions</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the maximum number of transactions that can be in the
        <quote>prepared</> state simultaneously (see <xref
        linkend="sql-prepare-transaction"
        endterm="sql-prepare-transaction-title">).
        Setting this parameter to zero disables the prepared-transaction
        feature.
        The default is 5.
        This option can only be set at server start.
       </para>

       <para>
        If you are not using prepared transactions, this parameter may as
        well be set to zero.  If you are using them, you will probably
        want <varname>max_prepared_transactions</varname> to be at least
        as large as <xref linkend="guc-max-connections">, to avoid unwanted
        failures at the prepare step.
       </para>

       <para>
        Increasing this parameter may cause <productname>PostgreSQL</>
        to request more <systemitem class="osname">System V</> shared
        memory than your operating system's default configuration
        allows. See <xref linkend="sysvipc"> for information on how to
        adjust those parameters, if necessary.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-work-mem" xreflabel="work_mem">
      <term><varname>work_mem</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>work_mem</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the amount of memory to be used by internal sort operations
        and hash tables before switching to temporary disk files. The value is
        specified in kilobytes, and defaults to 1024 kilobytes (1 MB).
        Note that for a complex query, several sort or hash operations might be
        running in parallel; each one will be allowed to use as much memory
        as this value specifies before it starts to put data into temporary
        files. Also, several running sessions could be doing such operations
        concurrently.  So the total memory used could be many
        times the value of <varname>work_mem</varname>; it is necessary to
        keep this fact in mind when choosing the value. Sort operations are
        used for <literal>ORDER BY</>, <literal>DISTINCT</>, and
        merge joins.
        Hash tables are used in hash joins, hash-based aggregation, and
        hash-based processing of <literal>IN</> subqueries.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-maintenance-work-mem" xreflabel="maintenance_work_mem">
      <term><varname>maintenance_work_mem</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>maintenance_work_mem</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the maximum amount of memory to be used in maintenance
        operations, such as <command>VACUUM</command>, <command>CREATE
        INDEX</>, and <command>ALTER TABLE ADD FOREIGN KEY</>.
        The value is specified in kilobytes, and defaults to 16384 kilobytes
        (16 MB).  Since only one of these operations can be executed at 
        a time by a database session, and an installation normally doesn't
        have very many of them happening concurrently, it's safe to set this
        value significantly larger than <varname>work_mem</varname>.  Larger
        settings may improve performance for vacuuming and for restoring
        database dumps.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-stack-depth" xreflabel="max_stack_depth">
      <term><varname>max_stack_depth</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_stack_depth</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the maximum safe depth of the server's execution stack.
        The ideal setting for this parameter is the actual stack size limit
        enforced by the kernel (as set by <literal>ulimit -s</> or local
        equivalent), less a safety margin of a megabyte or so.  The safety
        margin is needed because the stack depth is not checked in every
        routine in the server, but only in key potentially-recursive routines
        such as expression evaluation.  Setting the parameter higher than
        the actual kernel limit will mean that a runaway recursive function
        can crash an individual backend process.  The default setting is
        2048 KB (two megabytes), which is conservatively small and unlikely
        to risk crashes.  However, it may be too small to allow execution
        of complex functions.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
     </sect2>
     <sect2 id="runtime-config-resource-fsm">
     <title>Free Space Map</title>

     <indexterm>
      <primary>free space map</primary>
     </indexterm>

     <para>
      These parameters control the size of the shared <firstterm>free space
      map</>, which tracks the locations of unused space in the database.
      An undersized free space map may cause the database to consume
      increasing amounts of disk space over time, because free space that
      is not in the map cannot be re-used; instead <productname>PostgreSQL</>
      will request more disk space from the operating system when it needs
      to store new data.
      The last few lines displayed by a database-wide <command>VACUUM VERBOSE</> 
      command can help in determining if the current settings are adequate.
      A <literal>NOTICE</> message is also printed during such an operation
      if the current settings are too low.
     </para>

     <para>
      Increasing these parameters may cause <productname>PostgreSQL</>
      to request more <systemitem class="osname">System V</> shared
      memory than your operating system's default configuration
      allows. See <xref linkend="sysvipc"> for information on how to
      adjust those parameters, if necessary.
     </para>

     <variablelist>
     <varlistentry id="guc-max-fsm-pages" xreflabel="max_fsm_pages">
      <term><varname>max_fsm_pages</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_fsm_pages</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the maximum number of disk pages for which free space will
        be tracked in the shared free-space map.  Six bytes of shared memory
        are consumed for each page slot.  This setting must be more than
        16 * <varname>max_fsm_relations</varname>.  The default is 20000.
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-fsm-relations" xreflabel="max_fsm_relations">
      <term><varname>max_fsm_relations</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_fsm_relations</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the maximum number of relations (tables and indexes) for which
        free space will be tracked in the shared free-space map.  Roughly
        seventy bytes of shared memory are consumed for each slot.
        The default is 1000.
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
     </sect2>
     <sect2 id="runtime-config-resource-kernel">
     <title>Kernel Resource Usage</title>
     <variablelist>

     <varlistentry id="guc-max-files-per-process" xreflabel="max_files_per_process">
      <term><varname>max_files_per_process</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_files_per_process</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the maximum number of simultaneously open files allowed to each
        server subprocess. The default is 1000. If the kernel is enforcing
        a safe per-process limit, you don't need to worry about this setting.
        But on some platforms (notably, most BSD systems), the kernel will
        allow individual processes to open many more files than the system
        can really support when a large number of processes all try to open
        that many files. If you find yourself seeing <quote>Too many open
        files</> failures, try reducing this setting.
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-preload-libraries" xreflabel="preload_libraries">
      <term><varname>preload_libraries</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>preload_libraries</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This variable specifies one or more shared libraries that are
        to be preloaded at server start. A parameterless
        initialization function can optionally be called for each
        library.  To specify that, add a colon and the name of the
        initialization function after the library name. For example
        <literal>'$libdir/mylib:mylib_init'</literal> would cause
        <literal>mylib</> to be preloaded and <literal>mylib_init</>
        to be executed. If more than one library is to be loaded,
        separate their names with commas.
       </para>

       <para>
        If a specified library or initialization function is not found,
        the server will fail to start.
       </para>

       <para>
        <productname>PostgreSQL</productname> procedural language
        libraries may be preloaded in this way, typically by using the
        syntax <literal>'$libdir/plXXX:plXXX_init'</literal> where
        <literal>XXX</literal> is <literal>pgsql</>, <literal>perl</>,
        <literal>tcl</>, or <literal>python</>.
       </para>

       <para>
        By preloading a shared library (and initializing it if
        applicable), the library startup time is avoided when the
        library is first used.  However, the time to start each new
        server process may increase slightly, even if that process never
        uses the library.  So this option is recommended only for
        libraries that will be used in most sessions.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>

    <sect2 id="runtime-config-resource-vacuum-cost">
     <title id="runtime-config-resource-vacuum-cost-title">
       Cost-Based Vacuum Delay
     </title>

     <para>
      During the execution of <xref linkend="sql-vacuum"
      endterm="sql-vacuum-title"> and <xref linkend="sql-analyze"
      endterm="sql-analyze-title"> commands, the system maintains an
      internal counter that keeps track of the estimated cost of the
      various I/O operations that are performed.  When the accumulated
      cost reaches a limit (specified by
      <varname>vacuum_cost_limit</varname>), the process performing
      the operation will sleep for a while (specified by
      <varname>vacuum_cost_delay</varname>). Then it will reset the
      counter and continue execution.
     </para>

     <para>
      The intent of this feature is to allow administrators to reduce
      the I/O impact of these commands on concurrent database
      activity. There are many situations in which it is not very
      important that maintenance commands like
      <command>VACUUM</command> and <command>ANALYZE</command> finish
      quickly; however, it is usually very important that these
      commands do not significantly interfere with the ability of the
      system to perform other database operations. Cost-based vacuum
      delay provides a way for administrators to achieve this.
     </para>

     <para>
      This feature is disabled by default. To enable it, set the
      <varname>vacuum_cost_delay</varname> variable to a nonzero
      value.
     </para>

     <variablelist>
      <varlistentry id="guc-vacuum-cost-delay" xreflabel="vacuum_cost_delay">
       <term><varname>vacuum_cost_delay</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>vacuum_cost_delay</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         The length of time, in milliseconds, that the process will sleep
         when the cost limit has been exceeded.
         The default value is 0, which disables the cost-based vacuum
         delay feature.  Positive values enable cost-based vacuuming.
         Note that on many systems, the effective resolution
         of sleep delays is 10 milliseconds; setting
         <varname>vacuum_cost_delay</varname> to a value that is
         not a multiple of 10 may have the same results as setting it
         to the next higher multiple of 10.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-vacuum-cost-page-hit" xreflabel="vacuum_cost_page_hit">
       <term><varname>vacuum_cost_page_hit</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>vacuum_cost_page_hit</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         The estimated cost for vacuuming a buffer found in the shared buffer
         cache. It represents the cost to lock the buffer pool, lookup
         the shared hash table and scan the content of the page. The
         default value is 1.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-vacuum-cost-page-miss" xreflabel="vacuum_cost_page_miss">
       <term><varname>vacuum_cost_page_miss</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>vacuum_cost_page_miss</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         The estimated cost for vacuuming a buffer that has to be read from
         disk.  This represents the effort to lock the buffer pool,
         lookup the shared hash table, read the desired block in from
         the disk and scan its content. The default value is 10.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-vacuum-cost-page-dirty" xreflabel="vacuum_cost_page_dirty">
       <term><varname>vacuum_cost_page_dirty</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>vacuum_cost_page_dirty</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         The estimated cost charged when vacuum modifies a block that was
         previously clean. It represents the extra I/O required to
         flush the dirty block out to disk again. The default value is
         20.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-vacuum-cost-limit" xreflabel="vacuum_cost_limit">
       <term><varname>vacuum_cost_limit</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>vacuum_cost_limit</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         The accumulated cost that will cause the vacuuming process to sleep.
         The default value is 200.
        </para>
       </listitem>
      </varlistentry>
     </variablelist>

     <note>
      <para>
       There are certain operations that hold critical locks and should
       therefore complete as quickly as possible.  Cost-based vacuum
       delays do not occur during such operations.  Therefore it is
       possible that the cost accumulates far higher than the specified
       limit.  To avoid uselessly long delays in such cases, the actual
       delay is calculated as <varname>vacuum_cost_delay</varname> *
       <varname>accumulated_balance</varname> /
       <varname>vacuum_cost_limit</varname> with a maximum of
       <varname>vacuum_cost_delay</varname> * 4.
      </para>
     </note>
    </sect2>

    <sect2 id="runtime-config-resource-background-writer">
     <title>Background Writer</title>

     <para>
      Beginning in <productname>PostgreSQL</> 8.0, there is a separate server
      process called the <firstterm>background writer</>, whose sole function
      is to issue writes of <quote>dirty</> shared buffers.  The intent is
      that server processes handling user queries should seldom or never have
      to wait for a write to occur, because the background writer will do it.
      This arrangement also reduces the performance penalty associated with
      checkpoints.  The background writer will continuously trickle out dirty
      pages to disk, so that only a few pages will need to be forced out when
      checkpoint time arrives, instead of the storm of dirty-buffer writes that
      formerly occurred at each checkpoint.  However there is a net overall
      increase in I/O load, because where a repeatedly-dirtied page might
      before have been written only once per checkpoint interval, the
      background writer might write it several times in the same interval.
      In most situations a continuous low load is preferable to periodic
      spikes, but the parameters discussed in this subsection can be used to tune
      the behavior for local needs.
     </para>

     <variablelist>
      <varlistentry id="guc-bgwriter-delay" xreflabel="bgwriter_delay">
       <term><varname>bgwriter_delay</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>bgwriter_delay</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         Specifies the delay between activity rounds for the
         background writer.  In each round the writer issues writes
         for some number of dirty buffers (controllable by the
         following parameters).  It then sleeps for <varname>bgwriter_delay</>
         milliseconds, and repeats.  The default value is 200. Note
         that on many systems, the effective resolution of sleep
         delays is 10 milliseconds; setting <varname>bgwriter_delay</>
         to a value that is not a multiple of 10 may have the same
         results as setting it to the next higher multiple of 10.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> file.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-bgwriter-lru-percent" xreflabel="bgwriter_lru_percent">
       <term><varname>bgwriter_lru_percent</varname> (<type>floating point</type>)</term>
       <indexterm>
        <primary><varname>bgwriter_lru_percent</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         To reduce the probability that server processes will need to issue
         their own writes, the background writer tries to write buffers that
         are likely to be recycled soon.  In each round, it examines up to
         <varname>bgwriter_lru_percent</> of the buffers that are nearest to
         being recycled, and writes any that are dirty.
         The default value is 1.0 (this is a percentage of the total number
         of shared buffers).
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> file.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-bgwriter-lru-maxpages" xreflabel="bgwriter_lru_maxpages">
       <term><varname>bgwriter_lru_maxpages</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>bgwriter_lru_maxpages</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         In each round, no more than this many buffers will be written
         as a result of scanning soon-to-be-recycled buffers.
         The default value is 5.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> file.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-bgwriter-all-percent" xreflabel="bgwriter_all_percent">
       <term><varname>bgwriter_all_percent</varname> (<type>floating point</type>)</term>
       <indexterm>
        <primary><varname>bgwriter_all_percent</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         To reduce the amount of work that will be needed at checkpoint time,
         the background writer also does a circular scan through the entire
         buffer pool, writing buffers that are found to be dirty.
         In each round, it examines up to
         <varname>bgwriter_all_percent</> of the buffers for this purpose.
         The default value is 0.333 (this is a percentage of the total number
         of shared buffers).  With the default <varname>bgwriter_delay</>
         setting, this will allow the entire shared buffer pool to be scanned
         about once per minute.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> file.
        </para>
       </listitem>
      </varlistentry>

      <varlistentry id="guc-bgwriter-all-maxpages" xreflabel="bgwriter_all_maxpages">
       <term><varname>bgwriter_all_maxpages</varname> (<type>integer</type>)</term>
       <indexterm>
        <primary><varname>bgwriter_all_maxpages</> configuration parameter</primary>
       </indexterm>
       <listitem>
        <para>
         In each round, no more than this many buffers will be written
         as a result of the scan of the entire buffer pool.  (If this
         limit is reached, the scan stops, and resumes at the next buffer
         during the next round.)
         The default value is 5.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> file.
        </para>
       </listitem>
      </varlistentry>
     </variablelist>

     <para>
      Smaller values of <varname>bgwriter_all_percent</varname> and
      <varname>bgwriter_all_maxpages</varname> reduce the extra I/O load
      caused by the background writer, but leave more work to be done
      at checkpoint time.  To reduce load spikes at checkpoints,
      increase these two values.
      Similarly, smaller values of <varname>bgwriter_lru_percent</varname> and
      <varname>bgwriter_lru_maxpages</varname> reduce the extra I/O load
      caused by the background writer, but make it more likely that server
      processes will have to issue writes for themselves, delaying interactive
      queries.
      To disable background writing entirely,
      set both <varname>maxpages</varname> values and/or both
      <varname>percent</varname> values to zero.
     </para>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-wal">
    <title>Write Ahead Log</title>

   <para>
    See also <xref linkend="wal-configuration"> for details on WAL
    tuning.
   </para>

    <sect2 id="runtime-config-wal-settings">
     <title>Settings</title>
     <variablelist>
     
     <varlistentry id="guc-fsync" xreflabel="fsync">
      <indexterm>
       <primary><varname>fsync</> configuration parameter</primary>
      </indexterm>
      <term><varname>fsync</varname> (<type>boolean</type>)</term>
      <listitem>
       <para>
        If this option is on, the <productname>PostgreSQL</> server
        will use the <function>fsync()</> system call in several places
        to make sure that updates are physically written to disk. This
        insures that a database cluster will recover to a
        consistent state after an operating system or hardware crash.
       </para>

       <para>
        However, using <function>fsync()</function> results in a
        performance penalty: when a transaction is committed,
        <productname>PostgreSQL</productname> must wait for the
        operating system to flush the write-ahead log to disk.  When
        <varname>fsync</varname> is disabled, the operating system is
        allowed to do its best in buffering, ordering, and delaying
        writes. This can result in significantly improved performance.
        However, if the system crashes, the results of the last few
        committed transactions may be lost in part or whole. In the
        worst case, unrecoverable data corruption may occur.
        (Crashes of the database server itself are <emphasis>not</>
        a risk factor here.  Only an operating-system-level crash
        creates a risk of corruption.)
       </para>

       <para>
        Due to the risks involved, there is no universally correct
        setting for <varname>fsync</varname>. Some administrators
        always disable <varname>fsync</varname>, while others only
        turn it off for bulk loads, where there is a clear restart
        point if something goes wrong, whereas some administrators
        always leave <varname>fsync</varname> enabled. The default is
        to enable <varname>fsync</varname>, for maximum reliability.
        If you trust your operating system, your hardware, and your
        utility company (or your battery backup), you can consider
        disabling <varname>fsync</varname>.
       </para>

       <para>
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.  If this option
        is <literal>off</>, consider also turning off 
        <varname>guc-full-page-writes</>.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-wal-sync-method" xreflabel="wal_sync_method">
      <term><varname>wal_sync_method</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>wal_sync_method</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Method used for forcing WAL updates out to disk.  Possible
        values are:
       </para>
       <itemizedlist>
        <listitem>
        <para>
         <literal>open_datasync</> (write WAL files with <function>open()</> option <symbol>O_DSYNC</>)
        </para>
        </listitem>
        <listitem>
        <para>
         <literal>fdatasync</> (call <function>fdatasync()</> at each commit),
        </para>
        </listitem>
        <listitem>
        <para>
         <literal>fsync</> (call <function>fsync()</> at each commit)
        </para>
        </listitem>
        <listitem>
        <para>
         <literal>fsync_writethrough</> (force write-through of any disk write cache)
        </para>
        </listitem>
        <listitem>
        <para>
         <literal>open_sync</> (write WAL files with <function>open()</> option <symbol>O_SYNC</>)
        </para>
        </listitem>
       </itemizedlist>
       <para>
        Not all of these choices are available on all platforms.
        The top-most supported option is used as the default.
        If <varname>fsync</varname> is off then this setting is irrelevant.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-full-page-writes" xreflabel="full_page_writes">
      <indexterm>
       <primary><varname>full_page_writes</> configuration parameter</primary>
      </indexterm>
      <term><varname>full_page_writes</varname> (<type>boolean</type>)</term>
      <listitem>
       <para>
        A page write in process during an operating system crash might
        be only partially written to disk, leading to an on-disk page
        that contains a mix of old and new data. During recovery, the
        row changes stored in WAL are not enough to completely restore
        the page.
       </para>

       <para>
        When this option is on, the <productname>PostgreSQL</> server
        writes full pages to WAL when they are first modified after a
        checkpoint so full recovery is possible. Turning this option off
        might lead to a corrupt system after an operating system crash
        or power failure because uncorrected partial pages might contain
        inconsistent or corrupt data. The risks are less but similar to
        <varname>fsync</>.
       </para>

       <para>
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.  The default is
        <literal>on</>.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-wal-buffers" xreflabel="wal_buffers">
      <term><varname>wal_buffers</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>wal_buffers</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Number of disk-page buffers allocated in shared memory for WAL data.
        The default is 8.  The setting need only be large enough to hold
        the amount of WAL data generated by one typical transaction, since
        the data is flushed to disk at every transaction commit.
        This option can only be set at server start.
       </para>

       <para>
        Increasing this parameter may cause <productname>PostgreSQL</>
        to request more <systemitem class="osname">System V</> shared
        memory than your operating system's default configuration
        allows. See <xref linkend="sysvipc"> for information on how to
        adjust those parameters, if necessary.
       </para>
      </listitem>
     </varlistentry>
                
     <varlistentry id="guc-commit-delay" xreflabel="commit_delay">
      <term><varname>commit_delay</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>commit_delay</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Time delay between writing a commit record to the WAL buffer
        and flushing the buffer out to disk, in microseconds. A
        nonzero delay can allow multiple transactions to be committed
        with only one <function>fsync()</function> system call, if
        system load is high enough that additional transactions become
        ready to commit within the given interval. But the delay is
        just wasted if no other transactions become ready to
        commit. Therefore, the delay is only performed if at least
        <varname>commit_siblings</varname> other transactions are
        active at the instant that a server process has written its
        commit record. The default is zero (no delay).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-commit-siblings" xreflabel="commit_siblings">
      <term><varname>commit_siblings</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>commit_siblings</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Minimum number of concurrent open transactions to require
        before performing the <varname>commit_delay</> delay. A larger
        value makes it more probable that at least one other
        transaction will become ready to commit during the delay
        interval. The default is five.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
     </sect2>
     <sect2 id="runtime-config-wal-checkpoints">
     <title>Checkpoints</title>

    <variablelist>
     <varlistentry id="guc-checkpoint-segments" xreflabel="checkpoint_segments">
      <term><varname>checkpoint_segments</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>checkpoint_segments</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Maximum distance between automatic WAL checkpoints, in log
        file segments (each segment is normally 16 megabytes). The
        default is three.  This option can only be set at server start
        or in the <filename>postgresql.conf</filename> file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-checkpoint-timeout" xreflabel="checkpoint_timeout">
      <term><varname>checkpoint_timeout</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>checkpoint_timeout</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Maximum time between automatic WAL checkpoints, in
        seconds. The default is 300 seconds.  This option can only be
        set at server start or in the <filename>postgresql.conf</>
        file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-checkpoint-warning" xreflabel="checkpoint_warning">
      <term><varname>checkpoint_warning</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>checkpoint_warning</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Write a message to the server log if checkpoints caused by
        the filling of checkpoint segment files happen closer together
        than this many seconds.  The default is 30 seconds.
        Zero turns off the warning.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
     </sect2>
     <sect2 id="runtime-config-wal-archiving">
     <title>Archiving</title>

    <variablelist>
     <varlistentry id="guc-archive-command" xreflabel="archive_command">
      <term><varname>archive_command</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>archive_command</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The shell command to execute to archive a completed segment of
        the WAL file series. If this is an empty string (the default),
        WAL archiving is disabled. Any <literal>%p</> in the string is
        replaced by the absolute path of the file to archive, and any
        <literal>%f</> is replaced by the file name only. Use
        <literal>%%</> to embed an actual <literal>%</> character in the
        command. For more information see <xref
        linkend="backup-archiving-wal">. This option can only be set at
        server start or in the <filename>postgresql.conf</filename>
        file.
       </para>
       <para>
        It is important for the command to return a zero exit status if
        and only if it succeeds.  Examples:
<programlisting>
archive_command = 'cp "%p" /mnt/server/archivedir/"%f"'
archive_command = 'copy "%p" /mnt/server/archivedir/"%f"'  # Windows
</programlisting>
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-query">
    <title>Query Planning</title>

    <sect2 id="runtime-config-query-enable">
     <title>Planner Method Configuration</title>

      <para>
       These configuration parameters provide a crude method of
       influencing the query plans chosen by the query optimizer. If
       the default plan chosen by the optimizer for a particular query
       is not optimal, a temporary solution may be found by using one
       of these configuration parameters to force the optimizer to
       choose a different plan.  Turning one of these settings off
       permanently is seldom a good idea, however.
       Better ways to improve the quality of the
       plans chosen by the optimizer include adjusting the <xref
       linkend="runtime-config-query-constants"
       endterm="runtime-config-query-constants-title">, running <xref
       linkend="sql-analyze" endterm="sql-analyze-title"> more
       frequently, increasing the value of the <xref
       linkend="guc-default-statistics-target"> configuration parameter,
       and increasing the amount of statistics collected for
       specific columns using <command>ALTER TABLE SET
       STATISTICS</command>.
      </para>

     <variablelist>
     <varlistentry id="guc-enable-bitmapscan" xreflabel="enable_bitmapscan">
      <term><varname>enable_bitmapscan</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary>bitmap scan</primary>
      </indexterm>
      <indexterm>
       <primary><varname>enable_bitmapscan</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of bitmap-scan plan
        types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-hashagg" xreflabel="enable_hashagg">
      <term><varname>enable_hashagg</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_hashagg</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of hashed
        aggregation plan types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-hashjoin" xreflabel="enable_hashjoin">
      <term><varname>enable_hashjoin</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_hashjoin</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of hash-join plan
        types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-indexscan" xreflabel="enable_indexscan">
      <term><varname>enable_indexscan</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary>index scan</primary>
      </indexterm>
      <indexterm>
       <primary><varname>enable_indexscan</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of index-scan plan
        types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-mergejoin" xreflabel="enable_mergejoin">
      <term><varname>enable_mergejoin</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_mergejoin</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of merge-join plan
        types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-nestloop" xreflabel="enable_nestloop">
      <term><varname>enable_nestloop</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_nestloop</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of nested-loop join
        plans. It's not possible to suppress nested-loop joins entirely,
        but turning this variable off discourages the planner from using
        one if there are other methods available. The default is
        <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-seqscan" xreflabel="enable_seqscan">
      <term><varname>enable_seqscan</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary>sequential scan</primary>
      </indexterm>
      <indexterm>
       <primary><varname>enable_seqscan</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of sequential scan
        plan types. It's not possible to suppress sequential scans
        entirely, but turning this variable off discourages the planner
        from using one if there are other methods available. The
        default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-sort" xreflabel="enable_sort">
      <term><varname>enable_sort</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_sort</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of explicit sort
        steps. It's not possible to suppress explicit sorts entirely,
        but turning this variable off discourages the planner from
        using one if there are other methods available. The default
        is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-enable-tidscan" xreflabel="enable_tidscan">
      <term><varname>enable_tidscan</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>enable_tidscan</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of <acronym>TID</>
        scan plan types. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
     </sect2>
     <sect2 id="runtime-config-query-constants">
     <title id="runtime-config-query-constants-title">
      Planner Cost Constants
     </title>

   <note>
    <para>
     Unfortunately, there is no well-defined method for determining
     ideal values for the family of <quote>cost</quote> variables that
     appear below. You are encouraged to experiment and share
     your findings.
    </para>
   </note>

     <variablelist>
     
     <varlistentry id="guc-effective-cache-size" xreflabel="effective_cache_size">
      <term><varname>effective_cache_size</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>effective_cache_size</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the planner's assumption about the effective size of the
        disk cache that is available to a single index scan.  This is
        factored into estimates of the cost of using an index; a
        higher value makes it more likely index scans will be used, a
        lower value makes it more likely sequential scans will be
        used. When setting this parameter you should consider both
        <productname>PostgreSQL</productname>'s shared buffers and the
        portion of the kernel's disk cache that will be used for
        <productname>PostgreSQL</productname> data files.  Also, take
        into account the expected number of concurrent queries using
        different indexes, since they will have to share the available
        space.  This parameter has no effect on the size of shared
        memory allocated by <productname>PostgreSQL</productname>, nor
        does it reserve kernel disk cache; it is used only for
        estimation purposes.  The value is measured in disk pages,
        which are normally 8192 bytes each. The default is 1000.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-random-page-cost" xreflabel="random_page_cost">
      <term><varname>random_page_cost</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>random_page_cost</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the planner's estimate of the cost of a
        nonsequentially fetched disk page. This is measured as a
        multiple of the cost of a sequential page fetch. A higher
        value makes it more likely a sequential scan will be used, a
        lower value makes it more likely an index scan will be
        used. The default is four.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-cpu-tuple-cost" xreflabel="cpu_tuple_cost">
      <term><varname>cpu_tuple_cost</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>cpu_tuple_cost</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the planner's estimate of the cost of processing
        each row during a query. This is measured as a fraction of
        the cost of a sequential page fetch. The default is 0.01.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-cpu-index-tuple-cost" xreflabel="cpu_index_tuple_cost">
      <term><varname>cpu_index_tuple_cost</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>cpu_index_tuple_cost</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the planner's estimate of the cost of processing
        each index row during an index scan. This is measured as a
        fraction of the cost of a sequential page fetch. The default
        is 0.001.
       </para>
      </listitem>
     </varlistentry>
    
     <varlistentry id="guc-cpu-operator-cost" xreflabel="cpu_operator_cost">
      <term><varname>cpu_operator_cost</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>cpu_operator_cost</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the planner's estimate of the cost of processing each
        operator in a <literal>WHERE</> clause. This is measured as a fraction of
        the cost of a sequential page fetch. The default is 0.0025.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>

    </sect2>
     <sect2 id="runtime-config-query-geqo">
     <title>Genetic Query Optimizer</title>

     <variablelist>

     <varlistentry id="guc-geqo" xreflabel="geqo">
      <indexterm>
       <primary>genetic query optimization</primary>
      </indexterm>
      <indexterm>
       <primary>GEQO</primary>
       <see>genetic query optimization</see>
      </indexterm>
      <indexterm>
       <primary><varname>geqo</> configuration parameter</primary>
      </indexterm>
      <term><varname>geqo</varname> (<type>boolean</type>)</term>
      <listitem>
       <para>
        Enables or disables genetic query optimization, which is an
        algorithm that attempts to do query planning without
        exhaustive searching. This is on by default. The
        <varname>geqo_threshold</varname> variable provides a more
        granular way to disable GEQO for certain classes of queries.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-geqo-threshold" xreflabel="geqo_threshold">
      <term><varname>geqo_threshold</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>geqo_threshold</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Use genetic query optimization to plan queries with at least
        this many <literal>FROM</> items involved. (Note that an outer
        <literal>JOIN</> construct counts as only one <literal>FROM</>
        item.) The default is 12. For simpler queries it is usually best
        to use the deterministic, exhaustive planner, but for queries with
        many tables the deterministic planner takes too long.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-geqo-effort" xreflabel="geqo_effort">
      <term><varname>geqo_effort</varname>
      (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>geqo_effort</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls the trade off between planning time and query plan
        efficiency in GEQO. This variable must be an integer in the
        range from 1 to 10. The default value is 5. Larger values
        increase the time spent doing query planning, but also
        increase the likelihood that an efficient query plan will be
        chosen.
       </para>

       <para>
        <varname>geqo_effort</varname> doesn't actually do anything
        directly; it is only used to compute the default values for
        the other variables that influence GEQO behavior (described
        below). If you prefer, you can set the other parameters by
        hand instead.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-geqo-pool-size" xreflabel="geqo_pool_size">
      <term><varname>geqo_pool_size</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>geqo_pool_size</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls the pool size used by GEQO. The pool size is the
        number of individuals in the genetic population.  It must be
        at least two, and useful values are typically 100 to 1000.  If
        it is set to zero (the default setting) then a suitable
        default is chosen based on <varname>geqo_effort</varname> and
        the number of tables in the query.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-geqo-generations" xreflabel="geqo_generations">
      <term><varname>geqo_generations</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>geqo_generations</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls the number of generations used by GEQO.  Generations
        specifies the number of iterations of the algorithm.  It must
        be at least one, and useful values are in the same range as
        the pool size.  If it is set to zero (the default setting)
        then a suitable default is chosen based on
        <varname>geqo_pool_size</varname>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-geqo-selection-bias" xreflabel="geqo_selection_bias">
      <term><varname>geqo_selection_bias</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>geqo_selection_bias</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls the selection bias used by GEQO. The selection bias
        is the selective pressure within the population. Values can be
        from 1.50 to 2.00; the latter is the default.
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
    </sect2>
     <sect2 id="runtime-config-query-other">
     <title>Other Planner Options</title>

     <variablelist>

     <varlistentry id="guc-default-statistics-target" xreflabel="default_statistics_target">
      <term><varname>default_statistics_target</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>default_statistics_target</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the default statistics target for table columns that have
        not had a column-specific target set via <command>ALTER TABLE
        SET STATISTICS</>.  Larger values increase the time needed to
        do <command>ANALYZE</>, but may improve the quality of the
        planner's estimates. The default is 10. For more information
        on the use of statistics by the <productname>PostgreSQL</>
        query planner, refer to <xref linkend="planner-stats">.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-constraint-exclusion" xreflabel="constraint_exclusion">
      <term><varname>constraint_exclusion</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary>constraint exclusion</primary>
      </indexterm>
      <indexterm>
       <primary><varname>constraint_exclusion</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables or disables the query planner's use of table constraints to
        limit table access.  The default is <literal>off</>.
       </para>

       <para>
        When this parameter is <literal>on</>, the planner compares query
        conditions with table CHECK constraints, and omits scanning tables
        where the conditions contradict the constraints.  (Presently
        this is done only for child tables of inheritance scans.)  For
        example:

<programlisting>
CREATE TABLE parent(key integer, ...);
CREATE TABLE child1000(check (key between 1000 and 1999)) INHERITS(parent);
CREATE TABLE child2000(check (key between 2000 and 2999)) INHERITS(parent);
...
SELECT * FROM parent WHERE key = 2400;
</programlisting>

        With constraint exclusion enabled, this SELECT will not scan
        <structname>child1000</> at all.  This can improve performance when
        inheritance is used to build partitioned tables.
       </para>

       <para>
        Currently, <varname>constraint_exclusion</> defaults to
        <literal>off</>, because it risks incorrect results if
        query plans are cached --- if a table constraint is changed or dropped,
        the previously generated plan might now be wrong, and there is no
        built-in mechanism to force re-planning.  (This deficiency will
        probably be addressed in a future
        <productname>PostgreSQL</productname> release.)  Another reason
        for keeping it off is that the constraint checks are relatively
        expensive, and in many circumstances will yield no savings.
        It is recommended to turn this on only if you are actually using
        partitioned tables designed to take advantage of the feature.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-from-collapse-limit" xreflabel="from_collapse_limit">
      <term><varname>from_collapse_limit</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>from_collapse_limit</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The planner will merge sub-queries into upper queries if the
        resulting <literal>FROM</literal> list would have no more than
        this many items.  Smaller values reduce planning time but may
        yield inferior query plans.  The default is 8.  It is usually
        wise to keep this less than <xref linkend="guc-geqo-threshold">.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-join-collapse-limit" xreflabel="join_collapse_limit">
      <term><varname>join_collapse_limit</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>join_collapse_limit</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The planner will rewrite explicit inner <literal>JOIN</>
        constructs into lists of <literal>FROM</> items whenever a
        list of no more than this many items in total would
        result. Prior to <productname>PostgreSQL</> 7.4, joins
        specified via the <literal>JOIN</literal> construct would
        never be reordered by the query planner. The query planner has
        subsequently been improved so that inner joins written in this
        form can be reordered; this configuration parameter controls
        the extent to which this reordering is performed.
        <note>
         <para>
          At present, the order of outer joins specified via the
          <literal>JOIN</> construct is never adjusted by the query
          planner; therefore, <varname>join_collapse_limit</> has no
          effect on this behavior. The planner may be improved to
          reorder some classes of outer joins in a future release of
          <productname>PostgreSQL</productname>.
         </para>
        </note>
       </para>

       <para>
        By default, this variable is set the same as
        <varname>from_collapse_limit</varname>, which is appropriate
        for most uses. Setting it to 1 prevents any reordering of
        inner <literal>JOIN</>s. Thus, the explicit join order
        specified in the query will be the actual order in which the
        relations are joined. The query planner does not always choose
        the optimal join order; advanced users may elect to
        temporarily set this variable to 1, and then specify the join
        order they desire explicitly. Another consequence of setting
        this variable to 1 is that the query planner will behave more
        like the <productname>PostgreSQL</productname> 7.3 query
        planner, which some users might find useful for backward
        compatibility reasons.
       </para>

       <para>
        Setting this variable to a value between 1 and
        <varname>from_collapse_limit</varname> might be useful to
        trade off planning time against the quality of the chosen plan
        (higher values produce better plans).
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-logging">
    <title>Error Reporting and Logging</title>

    <indexterm zone="runtime-config-logging">
     <primary>server log</primary>
    </indexterm>

    <sect2 id="runtime-config-logging-where">
     <title>Where To Log</title>

     <indexterm zone="runtime-config-logging-where">
      <primary>where to log</primary>
     </indexterm>

     <variablelist>

     <varlistentry id="guc-log-destination" xreflabel="log_destination">
      <term><varname>log_destination</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_destination</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        <productname>PostgreSQL</productname> supports several methods
         for logging server messages, including
         <systemitem>stderr</systemitem> and
         <systemitem>syslog</systemitem>. On Windows, 
         <systemitem>eventlog</systemitem> is also supported. Set this
         option to a list of desired log destinations separated by
         commas. The default is to log to <systemitem>stderr</systemitem> 
         only.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-redirect-stderr" xreflabel="redirect_stderr">
      <term><varname>redirect_stderr</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>redirect_stderr</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         This option allows messages sent to <application>stderr</> to be
         captured and redirected into log files.
         This option, in combination with logging to <application>stderr</>,
         is often more useful than
         logging to <application>syslog</>, since some types of messages
         may not appear in <application>syslog</> output (a common example
         is dynamic-linker failure messages).
         This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-directory" xreflabel="log_directory">
      <term><varname>log_directory</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_directory</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When <varname>redirect_stderr</> is enabled, this option
        determines the directory in which log files will be created.
        It may be specified as an absolute path, or relative to the
        cluster data directory.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-filename" xreflabel="log_filename">
      <term><varname>log_filename</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_filename</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When <varname>redirect_stderr</varname> is enabled, this option
        sets the file names of the created log files.  The value
        is treated as a <systemitem>strftime</systemitem> pattern,
        so <literal>%</literal>-escapes
        can be used to specify time-varying file names.
        If no <literal>%</literal>-escapes are present,
        <productname>PostgreSQL</productname> will
        append the epoch of the new log file's open time.  For example,
        if <varname>log_filename</varname> were <literal>server_log</literal>, then the
        chosen file name would be <literal>server_log.1093827753</literal>
        for a log starting at Sun Aug 29 19:02:33 2004 MST.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-rotation-age" xreflabel="log_rotation_age">
      <term><varname>log_rotation_age</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>log_rotation_age</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When <varname>redirect_stderr</varname> is enabled, this option
        determines the maximum lifetime of an individual log file.
        After this many minutes have elapsed, a new log file will
        be created.  Set to zero to disable time-based creation of
        new log files.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-rotation-size" xreflabel="log_rotation_size">
      <term><varname>log_rotation_size</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>log_rotation_size</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When <varname>redirect_stderr</varname> is enabled, this option
        determines the maximum size of an individual log file.
        After this many kilobytes have been emitted into a log file,
        a new log file will be created.  Set to zero to disable size-based
        creation of new log files.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-truncate-on-rotation" xreflabel="log_truncate_on_rotation">
      <term><varname>log_truncate_on_rotation</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_truncate_on_rotation</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When <varname>redirect_stderr</varname> is enabled, this option will cause
        <productname>PostgreSQL</productname> to truncate (overwrite),
        rather than append to, any existing log file of the same name.
        However, truncation will occur only when a new file is being opened
        due to time-based rotation, not during server startup or size-based
        rotation.  When off, pre-existing files will be appended to in
        all cases.  For example, using this option in combination with
        a <varname>log_filename</varname> like <literal>postgresql-%H.log</literal>
        would result in generating twenty-four hourly log files and then
        cyclically overwriting them.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
       <para>
        Example:  To keep 7 days of logs, one log file per day named
        <literal>server_log.Mon</literal>, <literal>server_log.Tue</literal>, 
        etc, and automatically overwrite last week's log with this week's log,
        set <varname>log_filename</varname> to <literal>server_log.%a</literal>, 
        <varname>log_truncate_on_rotation</varname> to <literal>on</literal>, and 
        <varname>log_rotation_age</varname> to <literal>1440</literal>.
       </para>
       <para>
        Example: To keep 24 hours of logs, one log file per hour, but 
        also rotate sooner if the log file size exceeds 1GB, set 
        <varname>log_filename</varname> to <literal>server_log.%H%M</literal>, 
        <varname>log_truncate_on_rotation</varname> to <literal>on</literal>, 
        <varname>log_rotation_age</varname> to <literal>60</literal>, and 
        <varname>log_rotation_size</varname> to <literal>1000000</literal>.
        Including <literal>%M</> in <varname>log_filename</varname> allows
        any size-driven rotations that may occur to select a filename
        different from the hour's initial filename.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-syslog-facility" xreflabel="syslog_facility">
      <term><varname>syslog_facility</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>syslog_facility</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When logging to <application>syslog</> is enabled, this option
        determines the <application>syslog</application>
        <quote>facility</quote> to be used.  You may choose
        from <literal>LOCAL0</>, <literal>LOCAL1</>,
        <literal>LOCAL2</>, <literal>LOCAL3</>, <literal>LOCAL4</>,
        <literal>LOCAL5</>, <literal>LOCAL6</>, <literal>LOCAL7</>;
        the default is <literal>LOCAL0</>. See also the
        documentation of your system's
        <application>syslog</application> daemon.
        This option can only be set at server start.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-syslog-ident" xreflabel="syslog_ident">
      <term><varname>syslog_ident</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>syslog_identity</> configuration parameter</primary>
      </indexterm>
       <listitem>
        <para>
         When logging to <application>syslog</> is enabled, this option
         determines the program name used to identify
         <productname>PostgreSQL</productname> messages in
         <application>syslog</application> logs. The default is
         <literal>postgres</literal>.
          This option can only be set at server start.
        </para>
       </listitem>
      </varlistentry>
      
      </variablelist>
    </sect2>
     <sect2 id="runtime-config-logging-when">
     <title>When To Log</title>

     <variablelist>

     <varlistentry id="guc-client-min-messages" xreflabel="client_min_messages">
      <term><varname>client_min_messages</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>client_min_messages</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls which message levels are sent to the client.
        Valid values are <literal>DEBUG5</>,
        <literal>DEBUG4</>, <literal>DEBUG3</>, <literal>DEBUG2</>,
        <literal>DEBUG1</>, <literal>LOG</>, <literal>NOTICE</>,
        <literal>WARNING</>, and <literal>ERROR</>.  Each level
        includes all the levels that follow it.  The later the level,
        the fewer messages are sent.  The default is
        <literal>NOTICE</>.  Note that <literal>LOG</> has a different
        rank here than in <varname>log_min_messages</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-min-messages" xreflabel="log_min_messages">
      <term><varname>log_min_messages</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_min_messages</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls which message levels are written to the server log.
        Valid values are <literal>DEBUG5</>, <literal>DEBUG4</>,
        <literal>DEBUG3</>, <literal>DEBUG2</>, <literal>DEBUG1</>,
        <literal>INFO</>, <literal>NOTICE</>, <literal>WARNING</>,
        <literal>ERROR</>, <literal>LOG</>, <literal>FATAL</>, and
        <literal>PANIC</>.  Each level includes all the levels that
        follow it.  The later the level, the fewer messages are sent
        to the log.  The default is <literal>NOTICE</>.  Note that
        <literal>LOG</> has a different rank here than in
        <varname>client_min_messages</>.
        Only superusers can change this setting.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-error-verbosity" xreflabel="log_error_verbosity">
      <term><varname>log_error_verbosity</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_error_verbosity</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls the amount of detail written in the server log for each
        message that is logged.  Valid values are <literal>TERSE</>,
        <literal>DEFAULT</>, and <literal>VERBOSE</>, each adding more
        fields to displayed messages.
        Only superusers can change this setting.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-min-error-statement" xreflabel="log_min_error_statement">
      <term><varname>log_min_error_statement</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_min_error_statement</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls whether or not the SQL statement that causes an error
        condition will also be recorded in the server log. All SQL
        statements that cause an error of the specified level or
        higher are logged.  The default is
        <literal>PANIC</literal> (effectively turning this feature
        off for normal use). Valid values are <literal>DEBUG5</literal>,
        <literal>DEBUG4</literal>, <literal>DEBUG3</literal>,
        <literal>DEBUG2</literal>, <literal>DEBUG1</literal>,
        <literal>INFO</literal>, <literal>NOTICE</literal>,
        <literal>WARNING</literal>, <literal>ERROR</literal>,
        <literal>FATAL</literal>, and <literal>PANIC</literal>.  For
        example, if you set this to <literal>ERROR</literal> then all
        SQL statements causing errors, fatal errors, or panics will be
        logged. Enabling this option can be helpful in tracking down
        the source of any errors that appear in the server log.
        Only superusers can change this setting.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-log-min-duration-statement" xreflabel="log_min_duration_statement">
      <term><varname>log_min_duration_statement</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>log_min_duration_statement</> configuration parameter</primary>
      </indexterm>
       <listitem>
        <para>
         Logs the statement and its duration on a single log line if its
         duration is greater than or equal to the specified number of
         milliseconds. Setting this to zero will print all statements
         and their durations. Minus-one (the default) disables the
         feature. For example, if you set it to <literal>250</literal>
         then all SQL statements that run 250ms or longer will be
         logged. Enabling this option can be useful in tracking down
         unoptimized queries in your applications. This setting is
         independent of <varname>log_statement</varname> and
         <varname>log_duration</varname>. Only superusers can change
         this setting.
        </para>
       </listitem>
      </varlistentry>

     <varlistentry id="guc-silent-mode" xreflabel="silent_mode">
      <term><varname>silent_mode</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>silent_mode</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Runs the server silently. If this option is set, the server
        will automatically run in background and any controlling
        terminals are disassociated (same effect as
        <command>postmaster</>'s <option>-S</option> option).
        The server's standard output and standard error are redirected
        to <literal>/dev/null</>, so any messages sent to them will be lost.
        Unless <application>syslog</> logging is selected or
        <varname>redirect_stderr</> is enabled, using this option
        is discouraged because it makes it impossible to see error messages.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>

       <para>
        Here is a list of the various message severity levels used in
        these settings:
        <variablelist>
         <varlistentry>
          <term><literal>DEBUG[1-5]</literal></term>
          <listitem>
           <para>
            Provides information for use by developers.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>INFO</literal></term>
          <listitem>
           <para>
            Provides information implicitly requested by the user,
            e.g., during <command>VACUUM VERBOSE</>.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>NOTICE</literal></term>
          <listitem>
           <para>
            Provides information that may be helpful to users, e.g.,
            truncation of long identifiers and the creation of indexes as part
            of primary keys.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>WARNING</literal></term>
          <listitem>
           <para>
            Provides warnings to the user, e.g., <command>COMMIT</>
            outside a transaction block.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>ERROR</literal></term>
          <listitem>
           <para>
            Reports an error that caused the current command to abort.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>LOG</literal></term>
          <listitem>
           <para>
            Reports information of interest to administrators, e.g.,
            checkpoint activity.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>FATAL</literal></term>
          <listitem>
           <para>
            Reports an error that caused the current session to abort.
           </para>
          </listitem>
         </varlistentry>

         <varlistentry>
          <term><literal>PANIC</literal></term>
          <listitem>
           <para>
            Reports an error that caused all sessions to abort.
           </para>
          </listitem>
         </varlistentry>
        </variablelist>
       </para>

    </sect2>
     <sect2 id="runtime-config-logging-what">
     <title>What To Log</title>

     <variablelist>

     <varlistentry>
      <term><varname>debug_print_parse</varname> (<type>boolean</type>)</term>
      <term><varname>debug_print_rewritten</varname> (<type>boolean</type>)</term>
      <term><varname>debug_print_plan</varname> (<type>boolean</type>)</term>
      <term><varname>debug_pretty_print</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>debug_print_parse</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>debug_print_rewritten</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>debug_print_plan</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>debug_pretty_print</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        These options enable various debugging output to be emitted.
        For each executed query, they print
        the resulting parse tree, the query rewriter output, or the
        execution plan.  <varname>debug_pretty_print</varname> indents
        these displays to produce a more readable but much longer
        output format.  <varname>client_min_messages</varname> or
        <varname>log_min_messages</varname> must be
        <literal>DEBUG1</literal> or lower to actually send this output
        to the client or the server log, respectively.
        These options are off by default.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-connections" xreflabel="log_connections">
      <term><varname>log_connections</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_connections</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This outputs a line to the server log detailing each successful
        connection. This is off by default, although it is probably very
        useful.  Some client programs, like <application>psql</>, attempt 
        to connect twice while determining if a password is required, so 
        duplicate <quote>connection received</> messages do not
        necessarily indicate a problem. This option can only be set at
        server start or in the <filename>postgresql.conf</> configuration file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-disconnections" xreflabel="log_disconnections">
      <term><varname>log_disconnections</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_disconnections</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This outputs a line in the server log similar to
        <varname>log_connections</varname> but at session termination,
        and includes the duration of the session.  This is off by
        default. This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>
      </listitem>
     </varlistentry>


     <varlistentry id="guc-log-duration" xreflabel="log_duration">
      <term><varname>log_duration</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_duration</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Causes the duration of every completed statement which satisfies
        <varname>log_statement</> to be logged.  When using this option, 
        if you are not using <application>syslog</>, it is recommended 
        that you log the PID or session ID using <varname>log_line_prefix</> 
        so that you can link the statement to the 
        duration using the process ID or session ID. The default is
        <literal>off</>. Only superusers can change this setting.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-log-line-prefix" xreflabel="log_line_prefix">
      <term><varname>log_line_prefix</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_line_prefix</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
         This is a <function>printf</>-style string that is output at the
         beginning of each log line. The default is an empty string.
         Each recognized escape is replaced as outlined 
         below - anything else that looks like an escape is ignored. Other
         characters are copied straight to the log line. Some escapes are
         only recognised by session processes, and do not apply to
         background processes such as the postmaster. <application>Syslog</>
         produces its own 
         time stamp and process ID information, so you probably do not want to
         use those escapes if you are using <application>syslog</>.
         This option can only be set at server start or in the
         <filename>postgresql.conf</filename> configuration file.

         <informaltable>
          <tgroup cols="3">
           <thead>
            <row>
             <entry>Escape</entry>
             <entry>Effect</entry>
             <entry>Session only</entry>
             </row>
            </thead>
           <tbody>
            <row>
             <entry><literal>%u</literal></entry>
             <entry>User name</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%d</literal></entry>
             <entry>Database name</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%r</literal></entry>
             <entry>Remote host name or IP address, and remote port</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%h</literal></entry>
             <entry>Remote Hostname or IP address</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%p</literal></entry>
             <entry>Process ID</entry>
             <entry>no</entry>
            </row>
            <row>
             <entry><literal>%t</literal></entry>
             <entry>Time stamp (no milliseconds)</entry>
             <entry>no</entry>
            </row>
            <row>
             <entry><literal>%m</literal></entry>
             <entry>Time stamp with milliseconds</entry>
             <entry>no</entry>
            </row>
            <row>
             <entry><literal>%i</literal></entry>
             <entry>Command tag: This is the command that generated the log line.</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%c</literal></entry>
             <entry>Session ID: A unique identifier for each session.
             It is 2 4-byte hexadecimal numbers (without leading zeros) 
             separated by a dot. The numbers
             are the session start time and the process ID, so this can also
             be used as a space saving way of printing these items.</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%l</literal></entry>
             <entry>Number of the log line for each process, starting at 1</entry>
             <entry>no</entry>
            </row>
            <row>
             <entry><literal>%s</literal></entry>
             <entry>Session start time stamp</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%x</literal></entry>
             <entry>Transaction ID</entry>
             <entry>yes</entry>
            </row>
            <row>
             <entry><literal>%q</literal></entry>
             <entry>Does not produce any output, but tells non-session
             processes to stop at this point in the string. Ignored by
             session processes.</entry>
             <entry>no</entry>
            </row>
            <row>
             <entry><literal>%%</literal></entry>
             <entry>Literal <literal>%</></entry>
             <entry>no</entry>
            </row>
           </tbody>
          </tgroup>
         </informaltable>
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-statement" xreflabel="log_statement">
      <term><varname>log_statement</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>log_statement</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls which SQL statements are logged. Valid values are
        <literal>none</>, <literal>ddl</>, <literal>mod</>, and
        <literal>all</>. <literal>ddl</> logs all data definition
        commands like <literal>CREATE</>, <literal>ALTER</>, and
        <literal>DROP</> commands. <literal>mod</> logs all
        <literal>ddl</> statements, plus <literal>INSERT</>,
        <literal>UPDATE</>, <literal>DELETE</>, <literal>TRUNCATE</>,
        and <literal>COPY FROM</>. <literal>PREPARE</> and
        <literal>EXPLAIN ANALYZE</> statements are also logged if their
        contained command is of an appropriate type.
       </para>
       <para>
        The default is <literal>none</>. Only superusers can change this
        setting.
       </para>

       <note>
        <para>
         The <command>EXECUTE</command> statement is not considered a
         <literal>ddl</> or <literal>mod</> statement.  When it is logged, 
         only the name of the prepared statement is reported, not the
         actual prepared statement.
        </para>

        <para>
         When a function is defined in the
         <application>PL/pgSQL</application>server-side language, any queries
         executed by the function will only be logged the first time that the
         function is invoked in a particular session. This is because
         <application>PL/pgSQL</application> keeps a cache of the
         query plans produced for the SQL statements in the function.
        </para>
       </note>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-log-hostname" xreflabel="log_hostname">
      <term><varname>log_hostname</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_hostname</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        By default, connection log messages only show the IP address of the
        connecting host. Turning on this option causes logging of the
        host name as well.  Note that depending on your host name resolution
        setup this might impose a non-negligible performance penalty. This
        option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-statistics">
    <title>Runtime Statistics</title>

    <sect2 id="runtime-config-statistics-monitor">
     <title>Statistics Monitoring</title>
     <variablelist>

     <varlistentry>
      <term><varname>log_statement_stats</varname> (<type>boolean</type>)</term>
      <term><varname>log_parser_stats</varname> (<type>boolean</type>)</term>
      <term><varname>log_planner_stats</varname> (<type>boolean</type>)</term>
      <term><varname>log_executor_stats</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>log_statement_stats</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>log_parser_stats</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>log_planner_stats</> configuration parameter</primary>
      </indexterm>
      <indexterm>
       <primary><varname>log_executor_stats</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        For each query, write performance statistics of the respective
        module to the server log. This is a crude profiling
        instrument.  <varname>log_statement_stats</varname> reports total
        statement statistics, while the others report per-module statistics.
        <varname>log_statement_stats</varname> cannot be enabled together with
        any of the per-module options.  All of these options are disabled by
        default.   Only superusers can change these settings.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>

    </sect2>
    <sect2 id="runtime-config-statistics-collector">
     <title>Query and Index Statistics Collector</title>
     <variablelist>

     <varlistentry id="guc-stats-start-collector" xreflabel="stats_start_collector">
      <term><varname>stats_start_collector</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>stats_start_collector</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls whether the server should start the
        statistics-collection subprocess.  This is on by default, but
        may be turned off if you know you have no interest in
        collecting statistics.  This option can only be set at server
        start.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-stats-command-string" xreflabel="stats_command_string">
      <term><varname>stats_command_string</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>stats_command_string</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables the collection of statistics on the currently
        executing command of each session, along with the time at
        which that command began execution. This option is off by
        default. Note that even when enabled, this information is not
        visible to all users, only to superusers and the user owning
        the session being reported on; so it should not represent a
        security risk. This data can be accessed via the
        <structname>pg_stat_activity</structname> system view; refer
        to <xref linkend="monitoring"> for more information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-stats-block-level" xreflabel="stats_block_level">
      <term><varname>stats_block_level</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>stats_block_level</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables the collection of block-level statistics on database
        activity. This option is disabled by default. If this option
        is enabled, the data that is produced can be accessed via the
        <structname>pg_stat</structname> and
        <structname>pg_statio</structname> family of system views;
        refer to <xref linkend="monitoring"> for more information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-stats-row-level" xreflabel="stats_row_level">
      <term><varname>stats_row_level</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>stats_row_level</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Enables the collection of row-level statistics on database
        activity. This option is disabled by default. If this option
        is enabled, the data that is produced can be accessed via the
        <structname>pg_stat</structname> and
        <structname>pg_statio</structname> family of system views;
        refer to <xref linkend="monitoring"> for more information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-stats-reset-on-server-start" xreflabel="stats_reset_on_server_start">
      <term><varname>stats_reset_on_server_start</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>stats_reset_on_server_start</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        If on, collected statistics are zeroed out whenever the server
        is restarted. If off, statistics are accumulated across server
        restarts. The default is <literal>off</>. This option can only 
        be set at server start.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-autovacuum">
    <title>Automatic Vacuuming</title>

    <indexterm>
     <primary>autovacuum</primary>
     <secondary>global configuration parameters</secondary>
    </indexterm>

     <para>
      These settings control the default behavior for the <firstterm>autovacuum
      daemon</firstterm>. Please refer to <xref linkend="autovacuum"> for
      more information.
     </para>

    <variablelist>

     <varlistentry id="guc-autovacuum" xreflabel="autovacuum">
      <term><varname>autovacuum</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>autovacuum</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Controls whether the server should start the
        autovacuum subprocess.  This is off by default.
        <varname>stats_start_collector</> and <varname>stats_row_level</>
        must also be on for this to start.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-naptime" xreflabel="autovacuum_naptime">
      <term><varname>autovacuum_naptime</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_naptime</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the delay between activity rounds for the autovacuum
        subprocess.  In each round the subprocess examines one database
        and issues <command>VACUUM</> and <command>ANALYZE</> commands
        as needed for tables in that database.  The delay is measured
        in seconds, and the default is 60.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-vacuum-threshold" xreflabel="autovacuum_vacuum_threshold">
      <term><varname>autovacuum_vacuum_threshold</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_vacuum_threshold</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the minimum number of updated or deleted tuples needed
        to trigger a <command>VACUUM</> in any one table.
        The default is 1000.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-analyze-threshold" xreflabel="autovacuum_analyze_threshold">
      <term><varname>autovacuum_analyze_threshold</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_analyze_threshold</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the minimum number of inserted, updated or deleted tuples
        needed to trigger an <command>ANALYZE</> in any one table.
        The default is 500.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-vacuum-scale-factor" xreflabel="autovacuum_vacuum_scale_factor">
      <term><varname>autovacuum_vacuum_scale_factor</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_vacuum_scale_factor</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies a fraction of the table size to add to
        <varname>autovacuum_vacuum_threshold</varname>
        when deciding whether to trigger a <command>VACUUM</>.
        The default is 0.4.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-analyze-scale-factor" xreflabel="autovacuum_analyze_scale_factor">
      <term><varname>autovacuum_analyze_scale_factor</varname> (<type>floating point</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_analyze_scale_factor</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies a fraction of the table size to add to
        <varname>autovacuum_analyze_threshold</varname>
        when deciding whether to trigger an <command>ANALYZE</>.
        The default is 0.2.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> file.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-vacuum-cost-delay" xreflabel="autovacuum_vacuum_cost_delay">
      <term><varname>autovacuum_vacuum_cost_delay</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_vacuum_cost_delay</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the cost delay value that will be used in automatic
        <command>VACUUM</> operations.  If -1 is specified (which is the
        default), the regular
        <xref linkend="guc-vacuum-cost-delay"> value will be used.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-autovacuum-vacuum-cost-limit" xreflabel="autovacuum_vacuum_cost_limit">
      <term><varname>autovacuum_vacuum_cost_limit</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>autovacuum_vacuum_cost_limit</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Specifies the cost limit value that will be used in automatic
        <command>VACUUM</> operations.  If -1 is specified (which is the
        default), the regular
        <xref linkend="guc-vacuum-cost-limit"> value will be used.
        This setting can be overridden for individual tables by entries in
        <structname>pg_autovacuum</>.
       </para>
      </listitem>
     </varlistentry>

    </variablelist>
   </sect1>

   <sect1 id="runtime-config-client">
    <title>Client Connection Defaults</title>

    <sect2 id="runtime-config-client-statement">
     <title>Statement Behavior</title>
     <variablelist>

     <varlistentry id="guc-search-path" xreflabel="search_path">
      <term><varname>search_path</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>search_path</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>path</><secondary>for schemas</></>
      <listitem>
       <para>
        This variable specifies the order in which schemas are searched
        when an object (table, data type, function, etc.) is referenced by a
        simple name with no schema component.  When there are objects of
        identical names in different schemas, the one found first
        in the search path is used.  An object that is not in any of the
        schemas in the search path can only be referenced by specifying
        its containing schema with a qualified (dotted) name.
       </para>

       <para>
        The value for <varname>search_path</varname> has to be a comma-separated
        list of schema names.  If one of the list items is
        the special value <literal>$user</literal>, then the schema
        having the name returned by <function>SESSION_USER</> is substituted, if there
        is such a schema.  (If not, <literal>$user</literal> is ignored.)
       </para>

       <para>
        The system catalog schema, <literal>pg_catalog</>, is always
        searched, whether it is mentioned in the path or not.  If it is
        mentioned in the path then it will be searched in the specified
        order.  If <literal>pg_catalog</> is not in the path then it will
        be searched <emphasis>before</> searching any of the path items.
        It should also be noted that the temporary-table schema,
        <literal>pg_temp_<replaceable>nnn</></>, is implicitly searched before any of
        these.
       </para>

       <para>
        When objects are created without specifying a particular target
        schema, they will be placed in the first schema listed
        in the search path.  An error is reported if the search path is
        empty.
       </para>

       <para>
        The default value for this parameter is
        <literal>'$user, public'</literal> (where the second part will be
        ignored if there is no schema named <literal>public</>).
        This supports shared use of a database (where no users
        have private schemas, and all share use of <literal>public</>),
        private per-user schemas, and combinations of these.  Other
        effects can be obtained by altering the default search path
        setting, either globally or per-user.
       </para>

       <para>
        The current effective value of the search path can be examined
        via the <acronym>SQL</acronym> function
        <function>current_schemas()</>.  This is not quite the same as
        examining the value of <varname>search_path</varname>, since
        <function>current_schemas()</> shows how the requests
        appearing in <varname>search_path</varname> were resolved.
       </para>

       <para>
        For more information on schema handling, see <xref linkend="ddl-schemas">.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-default-tablespace" xreflabel="default_tablespace">
      <term><varname>default_tablespace</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>default_tablespace</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>tablespace</><secondary>default</></>
      <listitem>
       <para>
        This variable specifies the default tablespace in which to create
        objects (tables and indexes) when a <command>CREATE</> command does
        not explicitly specify a tablespace.
       </para>

       <para>
        The value is either the name of a tablespace, or an empty string
        to specify using the default tablespace of the current database.
        If the value does not match the name of any existing tablespace,
        <productname>PostgreSQL</> will automatically use the default
        tablespace of the current database.
       </para>

       <para>
        For more information on tablespaces,
        see <xref linkend="manage-ag-tablespaces">.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-check-function-bodies" xreflabel="check_function_bodies">
      <term><varname>check_function_bodies</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>check_function_bodies</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This parameter is normally on. When set to <literal>off</>, it
        disables validation of the function body string during <xref
        linkend="sql-createfunction"
        endterm="sql-createfunction-title">. Disabling validation is
        occasionally useful to avoid problems such as forward references
        when restoring function definitions from a dump.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-default-transaction-isolation" xreflabel="default_transaction_isolation">
      <indexterm>
       <primary>transaction isolation level</primary>
      </indexterm>
      <indexterm>
       <primary><varname>default_transaction_isolation</> configuration parameter</primary>
      </indexterm>
      <term><varname>default_transaction_isolation</varname> (<type>string</type>)</term>
      <listitem>
       <para>
        Each SQL transaction has an isolation level, which can be
        either <quote>read uncommitted</quote>, <quote>read
        committed</quote>, <quote>repeatable read</quote>, or
        <quote>serializable</quote>.  This parameter controls the
        default isolation level of each new transaction. The default
        is <quote>read committed</quote>.
       </para>

       <para>
        Consult <xref linkend="mvcc"> and <xref
        linkend="sql-set-transaction"
        endterm="sql-set-transaction-title"> for more information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-default-transaction-read-only" xreflabel="default_transaction_read_only">
      <indexterm>
       <primary>read-only transaction</primary>
      </indexterm>
      <indexterm>
       <primary><varname>default_transaction_read_only</> configuration parameter</primary>
      </indexterm>

      <term><varname>default_transaction_read_only</varname> (<type>boolean</type>)</term>
      <listitem>
       <para>
        A read-only SQL transaction cannot alter non-temporary tables.
        This parameter controls the default read-only status of each new
        transaction. The default is <literal>off</> (read/write).
       </para>

       <para>
        Consult <xref linkend="sql-set-transaction"
        endterm="sql-set-transaction-title"> for more information.
       </para>
      </listitem>
     </varlistentry>
     
     <varlistentry id="guc-statement-timeout" xreflabel="statement_timeout">
      <term><varname>statement_timeout</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>statement_timeout</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Abort any statement that takes over the specified number of
        milliseconds.  If <varname>log_min_error_statement</> is set to
        <literal>ERROR</> or lower, the statement that timed out will also be
        logged.  A value of zero (the default) turns off the 
        limitation.
       </para>
      </listitem>
     </varlistentry>
     
     </variablelist>
    </sect2>
     <sect2 id="runtime-config-client-format">
     <title>Locale and Formatting</title>

     <variablelist>

     <varlistentry id="guc-datestyle" xreflabel="DateStyle">
      <term><varname>DateStyle</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>DateStyle</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the display format for date and time values, as well as the
        rules for interpreting ambiguous date input values. For
        historical reasons, this variable contains two independent
        components: the output format specification (<literal>ISO</>,
        <literal>Postgres</>, <literal>SQL</>, or <literal>German</>)
        and the input/output specification for year/month/day ordering
        (<literal>DMY</>, <literal>MDY</>, or <literal>YMD</>). These
        can be set separately or together. The keywords <literal>Euro</>
        and <literal>European</> are synonyms for <literal>DMY</>; the
        keywords <literal>US</>, <literal>NonEuro</>, and
        <literal>NonEuropean</> are synonyms for <literal>MDY</>. See
        <xref linkend="datatype-datetime"> for more information. The
        default is <literal>ISO, MDY</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-timezone" xreflabel="timezone">
      <term><varname>timezone</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>timezone</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>time zone</></>
      <listitem>
       <para>
        Sets the time zone for displaying and interpreting time
        stamps.  The default is 'unknown', which means to use whatever 
        the system environment specifies as the time zone.  See <xref
        linkend="datatype-datetime"> for more information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-australian-timezones" xreflabel="australian_timezones">
      <term><varname>australian_timezones</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>australian_timezones</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>time zone</><secondary>Australian</></>
      <listitem>
       <para>
        If set to on, <literal>ACST</literal>,
        <literal>CST</literal>, <literal>EST</literal>, and
        <literal>SAT</literal> are interpreted as Australian time
        zones rather than as North/South American time zones and
        Saturday. The default is <literal>off</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-extra-float-digits" xreflabel="extra_float_digits">
      <indexterm>
       <primary>significant digits</primary>
      </indexterm>
      <indexterm>
       <primary>floating-point</primary>
       <secondary>display</secondary>
      </indexterm>
      <indexterm>
       <primary><varname>extra_float_digits</> configuration parameter</primary>
      </indexterm>

      <term><varname>extra_float_digits</varname> (<type>integer</type>)</term>
      <listitem>
       <para>
        This parameter adjusts the number of digits displayed for
        floating-point values, including <type>float4</>, <type>float8</>,
        and geometric data types.  The parameter value is added to the
        standard number of digits (<literal>FLT_DIG</> or <literal>DBL_DIG</>
        as appropriate).  The value can be set as high as 2, to include
        partially-significant digits; this is especially useful for dumping
        float data that needs to be restored exactly.  Or it can be set
        negative to suppress unwanted digits.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-client-encoding" xreflabel="client_encoding">
      <term><varname>client_encoding</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>client_encoding</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>character set</></>
      <listitem>
       <para>
        Sets the client-side encoding (character set).
        The default is to use the database encoding.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-messages" xreflabel="lc_messages">
      <term><varname>lc_messages</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_messages</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the language in which messages are displayed.  Acceptable
        values are system-dependent; see <xref linkend="locale"> for
        more information.  If this variable is set to the empty string
        (which is the default) then the value is inherited from the
        execution environment of the server in a system-dependent way.
       </para>

       <para>
        On some systems, this locale category does not exist.  Setting
        this variable will still work, but there will be no effect.
        Also, there is a chance that no translated messages for the
        desired language exist.  In that case you will continue to see
        the English messages.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-monetary" xreflabel="lc_monetary">
      <term><varname>lc_monetary</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_monetary</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the locale to use for formatting monetary amounts, for
        example with the <function>to_char</function> family of
        functions.  Acceptable values are system-dependent; see <xref
        linkend="locale"> for more information.  If this variable is
        set to the empty string (which is the default) then the value
        is inherited from the execution environment of the server in a
        system-dependent way.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-numeric" xreflabel="lc_numeric">
      <term><varname>lc_numeric</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_numeric</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the locale to use for formatting numbers, for example
        with the <function>to_char</function> family of
        functions. Acceptable values are system-dependent; see <xref
        linkend="locale"> for more information.  If this variable is
        set to the empty string (which is the default) then the value
        is inherited from the execution environment of the server in a
        system-dependent way.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-time" xreflabel="lc_time">
      <term><varname>lc_time</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_time</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Sets the locale to use for formatting date and time values.
        (Currently, this setting does nothing, but it may in the
        future.)  Acceptable values are system-dependent; see <xref
        linkend="locale"> for more information.  If this variable is
        set to the empty string (which is the default) then the value
        is inherited from the execution environment of the server in a
        system-dependent way.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>

    </sect2>
     <sect2 id="runtime-config-client-other">
     <title>Other Defaults</title>

     <variablelist>

     <varlistentry id="guc-explain-pretty-print" xreflabel="explain_pretty_print">
      <term><varname>explain_pretty_print</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>explain_pretty_print</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Determines whether <command>EXPLAIN VERBOSE</> uses the
        indented or non-indented format for displaying detailed
        query-tree dumps. The default is <literal>on</>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-dynamic-library-path" xreflabel="dynamic_library_path">
      <term><varname>dynamic_library_path</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>dynamic_library_path</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>dynamic loading</></>
      <listitem>
       <para>
        If a dynamically loadable module needs to be opened and the
        file name specified in the <command>CREATE FUNCTION</command> or
        <command>LOAD</command> command
        does not have a directory component (i.e. the
        name does not contain a slash), the system will search this
        path for the required file.
       </para>

       <para>
        The value for <varname>dynamic_library_path</varname> has to be a
        list of absolute directory paths separated by colons (or semi-colons
        on Windows).  If a list element starts
        with the special string <literal>$libdir</literal>, the
        compiled-in <productname>PostgreSQL</productname> package
        library directory is substituted for <literal>$libdir</literal>. This
        is where the modules provided by the standard
        <productname>PostgreSQL</productname> distribution are installed.
        (Use <literal>pg_config --pkglibdir</literal> to find out the name of
        this directory.) For example:
<programlisting>
dynamic_library_path = '/usr/local/lib/postgresql:/home/my_project/lib:$libdir'
</programlisting>
        or, in a Windows environment:
<programlisting>
dynamic_library_path = 'C:\tools\postgresql;H:\my_project\lib;$libdir'
</programlisting>
       </para>

       <para>
        The default value for this parameter is
        <literal>'$libdir'</literal>. If the value is set to an empty
        string, the automatic path search is turned off.
       </para>

       <para>
        This parameter can be changed at run time by superusers, but a
        setting done that way will only persist until the end of the
        client connection, so this method should be reserved for
        development purposes. The recommended way to set this parameter
        is in the <filename>postgresql.conf</filename> configuration
        file.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-locks">
    <title>Lock Management</title>

     <variablelist>

     <varlistentry id="guc-deadlock-timeout" xreflabel="deadlock_timeout">
      <indexterm>
       <primary>deadlock</primary>
       <secondary>timeout during</secondary>
      </indexterm>
      <indexterm>
       <primary>timeout</primary>
       <secondary>deadlock</secondary>
      </indexterm>
      <indexterm>
       <primary><varname>deadlock_timeout</> configuration parameter</primary>
      </indexterm>

      <term><varname>deadlock_timeout</varname> (<type>integer</type>)</term>
      <listitem>
       <para>
        This is the amount of time, in milliseconds, to wait on a lock
        before checking to see if there is a deadlock condition. The
        check for deadlock is relatively slow, so the server doesn't run
        it every time it waits for a lock. We (optimistically?) assume
        that deadlocks are not common in production applications and
        just wait on the lock for a while before starting the check for a
        deadlock. Increasing this value reduces the amount of time
        wasted in needless deadlock checks, but slows down reporting of
        real deadlock errors. The default is 1000 (i.e., one second),
        which is probably about the smallest value you would want in
        practice. On a heavily loaded server you might want to raise it.
        Ideally the setting should exceed your typical transaction time,
        so as to improve the odds that a lock will be released before
        the waiter decides to check for deadlock.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-locks-per-transaction" xreflabel="max_locks_per_transaction">
      <term><varname>max_locks_per_transaction</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_locks_per_transaction</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The shared lock table is created with room to describe locks on
        <varname>max_locks_per_transaction</varname> *
        (<xref linkend="guc-max-connections"> +
        <xref linkend="guc-max-prepared-transactions">) objects;
        hence, no more than this many distinct objects can
        be locked at any one time. (Thus, this parameter's name may be
        confusing: it is not a hard limit on the number of locks taken
        by any one transaction, but rather a maximum average value.)
        The default, 64, has historically
        proven sufficient, but you might need to raise this value if you
        have clients that touch many different tables in a single
        transaction. This option can only be set at server start.
       </para>

       <para>
        Increasing this parameter may cause <productname>PostgreSQL</>
        to request more <systemitem class="osname">System V</> shared
        memory than your operating system's default configuration
        allows. See <xref linkend="sysvipc"> for information on how to
        adjust those parameters, if necessary.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
   </sect1>

   <sect1 id="runtime-config-compatible">
    <title>Version and Platform Compatibility</title>

    <sect2 id="runtime-config-compatible-version">
     <title>Previous PostgreSQL Versions</title>
     <variablelist>

     <varlistentry id="guc-add-missing-from" xreflabel="add_missing_from">
      <term><varname>add_missing_from</varname> (<type>boolean</type>)</term>
      <indexterm><primary>FROM</><secondary>missing</></>
      <indexterm>
       <primary><varname>add_missing_from</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When on, tables that are referenced by a query will be
        automatically added to the <literal>FROM</> clause if not
        already present. This behavior does not comply with the SQL
        standard and many people dislike it because it can mask mistakes
        (such as referencing a table where you should have referenced
        its alias). The default is <literal>off</>. This variable can be
        enabled for compatibility with releases of
        <productname>PostgreSQL</> prior to 8.1, where this behavior was
        allowed by default.
       </para>

       <para>
        Note that even when this variable is enabled, a warning
        message will be emitted for each implicit <literal>FROM</>
        entry referenced by a query. Users are encouraged to update
        their applications to not rely on this behavior, by adding all
        tables referenced by a query to the query's <literal>FROM</>
        clause (or its <literal>USING</> clause in the case of
        <command>DELETE</>).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-regex-flavor" xreflabel="regex_flavor">
      <term><varname>regex_flavor</varname> (<type>string</type>)</term>
      <indexterm><primary>regular expressions</></>
      <indexterm>
       <primary><varname>regex_flavor</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        The regular expression <quote>flavor</> can be set to
        <literal>advanced</>, <literal>extended</>, or <literal>basic</>.
        The default is <literal>advanced</>.  The <literal>extended</>
        setting may be useful for exact backwards compatibility with
        pre-7.4 releases of <productname>PostgreSQL</>.  See
        <xref linkend="posix-syntax-details"> for details.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-sql-inheritance" xreflabel="sql_inheritance">
      <term><varname>sql_inheritance</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>sql_inheritance</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>inheritance</></>
      <listitem>
       <para>
        This controls the inheritance semantics, in particular whether
        subtables are included by various commands by default. They were
        not included in versions prior to 7.1. If you need the old
        behavior you can set this variable to <literal>off</>, but in
        the long run you are encouraged to change your applications to
        use the <literal>ONLY</literal> key word to exclude subtables.
        See <xref linkend="ddl-inherit"> for more information about
        inheritance.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-default-with-oids" xreflabel="default_with_oids">
      <term><varname>default_with_oids</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>default_with_oids</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This controls whether <command>CREATE TABLE</command> and
        <command>CREATE TABLE AS</command> include an OID column in
        newly-created tables, if neither <literal>WITH OIDS</literal>
        nor <literal>WITHOUT OIDS</literal> is specified. It also
        determines whether OIDs will be included in tables created by
        <command>SELECT INTO</command>. In <productname>PostgreSQL</>
        8.1 <varname>default_with_oids</> is disabled by default; in
        prior versions of <productname>PostgreSQL</productname>, it
        was on by default.
       </para>

       <para>
        The use of OIDs in user tables is considered deprecated, so
        most installations should leave this variable disabled.
        Applications that require OIDs for a particular table should
        specify <literal>WITH OIDS</literal> when creating the
        table. This variable can be enabled for compatibility with old
        applications that do not follow this behavior.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-escape-string-warning" xreflabel="escape_string_warning">
      <term><varname>escape_string_warning</varname> (<type>boolean</type>)</term>
      <indexterm><primary>strings</><secondary>escape</></>
      <indexterm>
       <primary><varname>escape_string_warning</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When on, a warning is issued if a backslash (<literal>\</>)
        appears in an ordinary string literal (<literal>'...'</>
        syntax). The default is <literal>off</>.
       </para>
       <para>
        Escape string syntax (<literal>E'...'</>) should be used for
        escapes, because in future versions of
        <productname>PostgreSQL</productname> ordinary strings will have
        the standard-conforming behavior of treating backslashes
        literally.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>
    <sect2 id="runtime-config-compatible-clients">
     <title>Platform and Client Compatibility</title>
     <variablelist>

     <varlistentry id="guc-transform-null-equals" xreflabel="transform_null_equals">
      <term><varname>transform_null_equals</varname> (<type>boolean</type>)</term>
      <indexterm><primary>IS NULL</></>
      <indexterm>
       <primary><varname>transform_null_equals</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        When on, expressions of the form <literal><replaceable>expr</> =
        NULL</literal> (or <literal>NULL =
        <replaceable>expr</></literal>) are treated as
        <literal><replaceable>expr</> IS NULL</literal>, that is, they
        return true if <replaceable>expr</> evaluates to the null value,
        and false otherwise. The correct SQL-spec-compliant behavior of
        <literal><replaceable>expr</> = NULL</literal> is to always
        return null (unknown). Therefore this option defaults to
        <literal>off</>.
       </para>

       <para>
        However, filtered forms in <productname>Microsoft
        Access</productname> generate queries that appear to use
        <literal><replaceable>expr</> = NULL</literal> to test for
        null values, so if you use that interface to access the database you
        might want to turn this option on.  Since expressions of the
        form <literal><replaceable>expr</> = NULL</literal> always
        return the null value (using the correct interpretation) they are not
        very useful and do not appear often in normal applications, so
        this option does little harm in practice.  But new users are
        frequently confused about the semantics of expressions
        involving null values, so this option is not on by default.
       </para>

       <para>
        Note that this option only affects the exact form <literal>= NULL</>,
        not other comparison operators or other expressions
        that are computationally equivalent to some expression
        involving the equals operator (such as <literal>IN</literal>).
        Thus, this option is not a general fix for bad programming.
       </para>

       <para>
        Refer to <xref linkend="functions-comparison"> for related information.
       </para>
      </listitem>
     </varlistentry>

     </variablelist>
    </sect2>
   </sect1>

   <sect1 id="runtime-config-preset">
    <title>Preset Options</title>

    <para>
     The following <quote>parameters</> are read-only, and are determined
     when <productname>PostgreSQL</productname> is compiled or when it is
     installed. As such, they have been excluded from the sample
     <filename>postgresql.conf</> file.  These options report
     various aspects of <productname>PostgreSQL</productname> behavior
     that may be of interest to certain applications, particularly
     administrative front-ends.
    </para>

    <variablelist>

     <varlistentry id="guc-block-size" xreflabel="block_size">
      <term><varname>block_size</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>block_size</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the size of a disk block.  It is determined by the value
        of <literal>BLCKSZ</> when building the server. The default
        value is 8192 bytes.  The meaning of some configuration
        variables (such as <xref linkend="guc-shared-buffers">) is
        influenced by <varname>block_size</varname>. See <xref
        linkend="runtime-config-resource"> for information.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-integer-datetimes" xreflabel="integer_datetimes">
      <term><varname>integer_datetimes</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>integer_datetimes</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports whether <productname>PostgreSQL</productname> was built
        with support for 64-bit-integer dates and times.  It is set by
        configuring with <literal>--enable-integer-datetimes</literal>
        when building <productname>PostgreSQL</productname>.  The
        default value is <literal>off</literal>.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-collate" xreflabel="lc_collate">
      <term><varname>lc_collate</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_collate</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the locale in which sorting of textual data is done.
        See <xref linkend="locale"> for more information.
        The value is determined when the database cluster is initialized.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-lc-ctype" xreflabel="lc_ctype">
      <term><varname>lc_ctype</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>lc_ctype</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the locale that determines character classifications.
        See <xref linkend="locale"> for more information.
        The value is determined when the database cluster is initialized.
        Ordinarily this will be the same as <varname>lc_collate</varname>,
        but for special applications it might be set differently.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-function-args" xreflabel="max_function_args">
      <term><varname>max_function_args</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_function_args</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the maximum number of function arguments. It is determined by
        the value of <literal>FUNC_MAX_ARGS</> when building the server. The
        default value is 100.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-identifier-length" xreflabel="max_identifier_length">
      <term><varname>max_identifier_length</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_identifier_length</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the maximum identifier length. It is determined as one
        less than the value of <literal>NAMEDATALEN</> when building
        the server. The default value of <literal>NAMEDATALEN</> is
        64; therefore the default
        <varname>max_identifier_length</varname> is 63.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-max-index-keys" xreflabel="max_index_keys">
      <term><varname>max_index_keys</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>max_index_keys</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the maximum number of index keys. It is determined by
        the value of <literal>INDEX_MAX_KEYS</> when building the server. The
        default value is 32.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-server-encoding" xreflabel="server_encoding">
      <term><varname>server_encoding</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>server_encoding</> configuration parameter</primary>
      </indexterm>
      <indexterm><primary>character set</></>
      <listitem>
       <para>
        Reports the database encoding (character set).
        It is determined when the database is created.  Ordinarily,
        clients need only be concerned with the value of <xref
        linkend="guc-client-encoding">.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-server-version" xreflabel="server_version">
      <term><varname>server_version</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>server_version</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports the version number of the server. It is determined by the
        value of <literal>PG_VERSION</> when building the server.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-standard-conforming-strings" xreflabel="standard_conforming_strings">
      <term><varname>standard_conforming_strings</varname> (<type>boolean</type>)</term>
      <indexterm><primary>strings</><secondary>escape</></>
      <indexterm>
       <primary><varname>standard_conforming_strings</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Reports whether ordinary string literals
        (<literal>'...'</>) treat backslashes literally, as specified in
        the SQL standard.  The value is currently always <literal>off</>,
        indicating that backslashes are treated as escapes.  It is planned
        that this will change to <literal>on</> in a future
        <productname>PostgreSQL</productname> release when string literal
        syntax changes to meet the standard.  Applications may check this
        parameter to determine how string literals will be processed.
        The presence of this parameter can also be taken as an indication
        that the escape string syntax (<literal>E'...'</>) is supported.
       </para>
      </listitem>
     </varlistentry>

    </variablelist>
   </sect1>

   <sect1 id="runtime-config-custom">
    <title>Customized Options</title>

    <para>
     This feature was designed to allow options not normally known to
     <productname>PostgreSQL</productname> to be added by add-on modules
     (such as procedural languages).  This allows add-on modules to be
     configured in the standard ways.
    </para>

    <variablelist>

     <varlistentry id="guc-custom-variable-classes" xreflabel="custom_variable_classes">
      <term><varname>custom_variable_classes</varname> (<type>string</type>)</term>
      <indexterm>
       <primary><varname>custom_variable_classes</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        This variable specifies one or several class names to be used for
        custom variables, in the form of a comma-separated list. A custom
        variable is a variable not normally known
        to <productname>PostgreSQL</productname> proper but used by some
        add-on module.  Such variables must have names consisting of a class
        name, a dot, and a variable name.  <varname>custom_variable_classes</>
        specifies all the class names in use in a particular installation.
        This option can only be set at server start or in the
        <filename>postgresql.conf</filename> configuration file.
       </para>

      </listitem>
     </varlistentry>
    </variablelist>

    <para>
     The difficulty with setting custom variables in
     <filename>postgresql.conf</> is that the file must be read before add-on
     modules have been loaded, and so custom variables would ordinarily be
     rejected as unknown.  When <varname>custom_variable_classes</> is set,
     the server will accept definitions of arbitrary variables within each
     specified class.  These variables will be treated as placeholders and
     will have no function until the module that defines them is loaded. When a
     module for a specific class is loaded, it will add the proper variable
     definitions for its class name, convert any placeholder
     values according to those definitions, and issue warnings for any
     placeholders of its class that remain (which presumably would be
     misspelled configuration variables).
    </para>

    <para>
     Here is an example of what <filename>postgresql.conf</> might contain
     when using custom variables:

<programlisting>
custom_variable_classes = 'plr,plperl'
plr.path = '/usr/lib/R'
plperl.use_strict = true
plruby.use_strict = true        # generates error: unknown class name
</programlisting>
    </para>
   </sect1>

   <sect1 id="runtime-config-developer">
    <title>Developer Options</title>

    <para>
     The following options are intended for work on the
     <productname>PostgreSQL</productname> source, and in some cases
     to assist with recovery of severely damaged databases.  There
     should be no reason to use them in a production database setup.
     As such, they have been excluded from the sample
     <filename>postgresql.conf</> file.  Note that many of these
     options require special source compilation flags to work at all.
    </para>

    <variablelist>
     <varlistentry id="guc-debug-assertions" xreflabel="debug_assertions">
      <term><varname>debug_assertions</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>debug_assertions</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Turns on various assertion checks. This is a debugging aid. If
        you are experiencing strange problems or crashes you might want
        to turn this on, as it might expose programming mistakes. To use
        this option, the macro <symbol>USE_ASSERT_CHECKING</symbol>
        must be defined when <productname>PostgreSQL</productname> is
        built (accomplished by the <command>configure</command> option
        <option>--enable-cassert</option>). Note that
        <varname>debug_assertions</varname> defaults to <literal>on</>
        if <productname>PostgreSQL</productname> has been built with
        assertions enabled.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-pre-auth-delay" xreflabel="pre_auth_delay">
      <term><varname>pre_auth_delay</varname> (<type>integer</type>)</term>
      <indexterm>
       <primary><varname>pre_auth_delay</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        If nonzero, a delay of this many seconds occurs just after a new
        server process is forked, before it conducts the authentication
        process.  This is intended to give an opportunity to attach to the
        server process with a debugger to trace down misbehavior in
        authentication.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-trace-notify" xreflabel="trace_notify">
      <term><varname>trace_notify</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>trace_notify</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Generates a great amount of debugging output for the
        <command>LISTEN</command> and <command>NOTIFY</command>
        commands.  <xref linkend="guc-client-min-messages"> or
        <xref linkend="guc-log-min-messages"> must be
        <literal>DEBUG1</literal> or lower to send this output to the
        client or server log, respectively.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-trace-sort" xreflabel="trace_sort">
      <term><varname>trace_sort</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>trace_sort</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        If on, emit information about resource usage during sort operations.
        This option is only available if the <symbol>TRACE_SORT</symbol> macro
        was defined when <productname>PostgreSQL</productname> was compiled.
        (However, <symbol>TRACE_SORT</symbol> is currently defined by default.)
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><varname>trace_locks</varname> (<type>boolean</type>)</term>
      <term><varname>trace_lwlocks</varname> (<type>boolean</type>)</term>
      <term><varname>trace_userlocks</varname> (<type>boolean</type>)</term>
      <term><varname>trace_lock_oidmin</varname> (<type>boolean</type>)</term>
      <term><varname>trace_lock_table</varname> (<type>boolean</type>)</term>
      <term><varname>debug_deadlocks</varname> (<type>boolean</type>)</term>
      <term><varname>log_btree_build_stats</varname> (<type>boolean</type>)</term>
      <listitem>
       <para>
        Various other code tracing and debugging options.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry id="guc-wal-debug" xreflabel="wal_debug">
      <term><varname>wal_debug</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>wal_debug</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        If on, emit WAL-related debugging output. This option is
        only available if the <symbol>WAL_DEBUG</symbol> macro was
        defined when <productname>PostgreSQL</productname> was
        compiled.
       </para>
      </listitem>
     </varlistentry>

    <varlistentry id="guc-zero-damaged-pages" xreflabel="zero_damaged_pages">
      <term><varname>zero_damaged_pages</varname> (<type>boolean</type>)</term>
      <indexterm>
       <primary><varname>zero_damaged_pages</> configuration parameter</primary>
      </indexterm>
      <listitem>
       <para>
        Detection of a damaged page header normally causes
        <productname>PostgreSQL</> to report an error, aborting the current
        command.  Setting <varname>zero_damaged_pages</> to on causes
        the system to instead report a warning, zero out the damaged page,
        and continue processing.  This behavior <emphasis>will destroy data</>,
        namely all the rows on the damaged page.  But it allows you to get
        past the error and retrieve rows from any undamaged pages that may
        be present in the table.  So it is useful for recovering data if
        corruption has occurred due to hardware or software error.  You should
        generally not set this on until you have given up hope of recovering
        data from the damaged page(s) of a table.  The
        default setting is <literal>off</>, and it can only be changed
        by a superuser.
       </para>
      </listitem>
     </varlistentry>
   </variablelist>
  </sect1>
  <sect1 id="runtime-config-short">
   <title>Short Options</title>

   <para>
    For convenience there are also single letter command-line option switches
    available for some parameters. They are described in <xref
    linkend="runtime-config-short-table">.
   </para>

    <table id="runtime-config-short-table">
     <title>Short option key</title>
     <tgroup cols="2">
      <thead>
       <row>
        <entry>Short option</entry>
        <entry>Equivalent</entry>
       </row>
      </thead>

      <tbody>
       <row>
        <entry><option>-B <replaceable>x</replaceable></option></entry>
        <entry><literal>shared_buffers = <replaceable>x</replaceable></></entry>
       </row>
       <row>
        <entry><option>-d <replaceable>x</replaceable></option></entry>
        <entry><literal>log_min_messages = DEBUG<replaceable>x</replaceable></></entry>
       </row>
       <row>
        <entry><option>-F</option></entry>
        <entry><literal>fsync = off</></entry>
       </row>
       <row>
        <entry><option>-h <replaceable>x</replaceable></option></entry>
        <entry><literal>listen_addresses = <replaceable>x</replaceable></></entry>
       </row>
       <row>
        <entry><option>-i</option></entry>
        <entry><literal>listen_addresses = '*'</></entry>
       </row>
       <row>
        <entry><option>-k <replaceable>x</replaceable></option></entry>
        <entry><literal>unix_socket_directory = <replaceable>x</replaceable></></entry>
       </row>
       <row>
        <entry><option>-l</option></entry>
        <entry><literal>ssl = on</></entry>
       </row>
       <row>
        <entry><option>-N <replaceable>x</replaceable></option></entry>
        <entry><literal>max_connections = <replaceable>x</replaceable></></entry>
       </row>
       <row>
        <entry><option>-p <replaceable>x</replaceable></option></entry>
        <entry><literal>port = <replaceable>x</replaceable></></entry>
       </row>

       <row>
        <entry>
          <option>-fb</option>, <option>-fh</option>, <option>-fi</option>,
          <option>-fm</option>, <option>-fn</option>,
          <option>-fs</option>, <option>-ft</option><footnote
          id="fn.runtime-config-short">
           <para>
            For historical reasons, these options must be passed to
            the individual server process via the <option>-o</option>
            <command>postmaster</command> option, for example,
<screen>
$ <userinput>postmaster -o '-S 1024 -s'</userinput>
</screen>
            or via <envar>PGOPTIONS</envar> from the client side, as
            explained above.
           </para>
          </footnote>
         </entry>
         <entry>
          <literal>enable_bitmapscan = off</>,
          <literal>enable_hashjoin = off</>,
          <literal>enable_indexscan = off</>,
          <literal>enable_mergejoin = off</>,
          <literal>enable_nestloop = off</>,
          <literal>enable_seqscan = off</>,
          <literal>enable_tidscan = off</>
         </entry>
       </row>

       <row>
        <entry><option>-s</option><footnoteref linkend="fn.runtime-config-short"></entry>
        <entry><literal>log_statement_stats = on</></entry>
       </row>

       <row>
        <entry><option>-S <replaceable>x</replaceable></option><footnoteref linkend="fn.runtime-config-short">
        </entry>
        <entry><literal>work_mem = <replaceable>x</replaceable></></entry>
       </row>

       <row>
        <entry><option>-tpa</option>, <option>-tpl</option>, <option>-te</option><footnoteref linkend="fn.runtime-config-short"></entry>
        <entry><literal>log_parser_stats = on</>,
        <literal>log_planner_stats = on</>, 
        <literal>log_executor_stats = on</></entry>
       </row>
      </tbody>
     </tgroup>
    </table>

  </sect1>
</chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode:sgml
sgml-omittag:nil
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:1
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:"./reference.ced"
sgml-exposed-tags:nil
sgml-local-catalogs:("/usr/lib/sgml/catalog")
sgml-local-ecat-files:nil
End:
-->
