<!-- doc/src/sgml/datatype.sgml -->

 <chapter id="datatype">
  <title>Data Types</title>

  <indexterm zone="datatype">
   <primary>data type</primary>
  </indexterm>

  <indexterm>
   <primary>type</primary>
   <see>data type</see>
  </indexterm>

  <para>
   <productname>PostgreSQL</productname> has a rich set of native data
   types available to users.  Users can add new types to
   <productname>PostgreSQL</productname> using the <xref
   linkend="sql-createtype"> command.
  </para>

  <para>
   <xref linkend="datatype-table"> shows all the built-in general-purpose data
   types. Most of the alternative names listed in the
   <quote>Aliases</quote> column are the names used internally by
   <productname>PostgreSQL</productname> for historical reasons.  In
   addition, some internally used or deprecated types are available,
   but are not listed here.
  </para>

   <table id="datatype-table">
    <title>Data Types</title>
    <tgroup cols="3">
     <thead>
      <row>
       <entry>Name</entry>
       <entry>Aliases</entry>
       <entry>Description</entry>
      </row>
     </thead>

     <tbody>
      <row>
       <entry><type>bigint</type></entry>
       <entry><type>int8</type></entry>
       <entry>signed eight-byte integer</entry>
      </row>

      <row>
       <entry><type>bigserial</type></entry>
       <entry><type>serial8</type></entry>
       <entry>autoincrementing eight-byte integer</entry>
      </row>

      <row>
       <entry><type>bit [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry></entry>
       <entry>fixed-length bit string</entry>
      </row>

      <row>
       <entry><type>bit varying [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry><type>varbit</type></entry>
       <entry>variable-length bit string</entry>
      </row>

      <row>
       <entry><type>boolean</type></entry>
       <entry><type>bool</type></entry>
       <entry>logical Boolean (true/false)</entry>
      </row>

      <row>
       <entry><type>box</type></entry>
       <entry></entry>
       <entry>rectangular box on a plane</entry>
      </row>

      <row>
       <entry><type>bytea</type></entry>
       <entry></entry>
       <entry>binary data (<quote>byte array</>)</entry>
      </row>

      <row>
       <entry><type>character [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry><type>char [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry>fixed-length character string</entry>
      </row>

      <row>
       <entry><type>character varying [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry><type>varchar [ (<replaceable>n</replaceable>) ]</type></entry>
       <entry>variable-length character string</entry>
      </row>

      <row>
       <entry><type>cidr</type></entry>
       <entry></entry>
       <entry>IPv4 or IPv6 network address</entry>
      </row>

      <row>
       <entry><type>circle</type></entry>
       <entry></entry>
       <entry>circle on a plane</entry>
      </row>

      <row>
       <entry><type>date</type></entry>
       <entry></entry>
       <entry>calendar date (year, month, day)</entry>
      </row>

      <row>
       <entry><type>double precision</type></entry>
       <entry><type>float8</type></entry>
       <entry>double precision floating-point number (8 bytes)</entry>
      </row>

      <row>
       <entry><type>inet</type></entry>
       <entry></entry>
       <entry>IPv4 or IPv6 host address</entry>
      </row>

      <row>
       <entry><type>integer</type></entry>
       <entry><type>int</type>, <type>int4</type></entry>
       <entry>signed four-byte integer</entry>
      </row>

      <row>
       <entry><type>interval [ <replaceable>fields</replaceable> ] [ (<replaceable>p</replaceable>) ]</type></entry>
       <entry></entry>
       <entry>time span</entry>
      </row>

      <row>
       <entry><type>json</type></entry>
       <entry></entry>
       <entry>textual JSON data</entry>
      </row>

      <row>
       <entry><type>jsonb</type></entry>
       <entry></entry>
       <entry>binary JSON data, decomposed</entry>
      </row>

      <row>
       <entry><type>line</type></entry>
       <entry></entry>
       <entry>infinite line on a plane</entry>
      </row>

      <row>
       <entry><type>lseg</type></entry>
       <entry></entry>
       <entry>line segment on a plane</entry>
      </row>

      <row>
       <entry><type>macaddr</type></entry>
       <entry></entry>
       <entry>MAC (Media Access Control) address</entry>
      </row>

      <row>
       <entry><type>money</type></entry>
       <entry></entry>
       <entry>currency amount</entry>
      </row>

      <row>
       <entry><type>numeric [ (<replaceable>p</replaceable>,
         <replaceable>s</replaceable>) ]</type></entry>
       <entry><type>decimal [ (<replaceable>p</replaceable>,
         <replaceable>s</replaceable>) ]</type></entry>
       <entry>exact numeric of selectable precision</entry>
      </row>

      <row>
       <entry><type>path</type></entry>
       <entry></entry>
       <entry>geometric path on a plane</entry>
      </row>

      <row>
       <entry><type>pg_lsn</type></entry>
       <entry></entry>
       <entry><productname>PostgreSQL</productname> Log Sequence Number</entry>
      </row>

      <row>
       <entry><type>point</type></entry>
       <entry></entry>
       <entry>geometric point on a plane</entry>
      </row>

      <row>
       <entry><type>polygon</type></entry>
       <entry></entry>
       <entry>closed geometric path on a plane</entry>
      </row>

      <row>
       <entry><type>real</type></entry>
       <entry><type>float4</type></entry>
       <entry>single precision floating-point number (4 bytes)</entry>
      </row>

      <row>
       <entry><type>smallint</type></entry>
       <entry><type>int2</type></entry>
       <entry>signed two-byte integer</entry>
      </row>

      <row>
       <entry><type>smallserial</type></entry>
       <entry><type>serial2</type></entry>
       <entry>autoincrementing two-byte integer</entry>
      </row>

      <row>
       <entry><type>serial</type></entry>
       <entry><type>serial4</type></entry>
       <entry>autoincrementing four-byte integer</entry>
      </row>

      <row>
       <entry><type>text</type></entry>
       <entry></entry>
       <entry>variable-length character string</entry>
      </row>

      <row>
       <entry><type>time [ (<replaceable>p</replaceable>) ] [ without time zone ]</type></entry>
       <entry></entry>
       <entry>time of day (no time zone)</entry>
      </row>

      <row>
       <entry><type>time [ (<replaceable>p</replaceable>) ] with time zone</type></entry>
       <entry><type>timetz</type></entry>
       <entry>time of day, including time zone</entry>
      </row>

      <row>
       <entry><type>timestamp [ (<replaceable>p</replaceable>) ] [ without time zone ]</type></entry>
       <entry></entry>
       <entry>date and time (no time zone)</entry>
      </row>

      <row>
       <entry><type>timestamp [ (<replaceable>p</replaceable>) ] with time zone</type></entry>
       <entry><type>timestamptz</type></entry>
       <entry>date and time, including time zone</entry>
      </row>

      <row>
       <entry><type>tsquery</type></entry>
       <entry></entry>
       <entry>text search query</entry>
      </row>

      <row>
       <entry><type>tsvector</type></entry>
       <entry></entry>
       <entry>text search document</entry>
      </row>

      <row>
       <entry><type>txid_snapshot</type></entry>
       <entry></entry>
       <entry>user-level transaction ID snapshot</entry>
      </row>

      <row>
       <entry><type>uuid</type></entry>
       <entry></entry>
       <entry>universally unique identifier</entry>
      </row>

      <row>
       <entry><type>xml</type></entry>
       <entry></entry>
       <entry>XML data</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

  <note>
   <title>Compatibility</title>
   <para>
    The following types (or spellings thereof) are specified by
    <acronym>SQL</acronym>: <type>bigint</type>, <type>bit</type>, <type>bit
    varying</type>, <type>boolean</type>, <type>char</type>,
    <type>character varying</type>, <type>character</type>,
    <type>varchar</type>, <type>date</type>, <type>double
    precision</type>, <type>integer</type>, <type>interval</type>,
    <type>numeric</type>, <type>decimal</type>, <type>real</type>,
    <type>smallint</type>, <type>time</type> (with or without time zone),
    <type>timestamp</type> (with or without time zone),
    <type>xml</type>.
   </para>
  </note>

  <para>
   Each data type has an external representation determined by its input
   and output functions.  Many of the built-in types have
   obvious external formats.  However, several types are either unique
   to <productname>PostgreSQL</productname>, such as geometric
   paths, or have several possible formats, such as the date
   and time types.
   Some of the input and output functions are not invertible, i.e.,
   the result of an output function might lose accuracy when compared to
   the original input.
  </para>

  <sect1 id="datatype-numeric">
   <title>Numeric Types</title>

   <indexterm zone="datatype-numeric">
    <primary>data type</primary>
    <secondary>numeric</secondary>
   </indexterm>

   <para>
    Numeric types consist of two-, four-, and eight-byte integers,
    four- and eight-byte floating-point numbers, and selectable-precision
    decimals.  <xref linkend="datatype-numeric-table"> lists the
    available types.
   </para>

    <table id="datatype-numeric-table">
     <title>Numeric Types</title>
     <tgroup cols="4">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
        <entry>Range</entry>
       </row>
      </thead>

      <tbody>
       <row>
        <entry><type>smallint</></entry>
        <entry>2 bytes</entry>
        <entry>small-range integer</entry>
        <entry>-32768 to +32767</entry>
       </row>
       <row>
        <entry><type>integer</></entry>
        <entry>4 bytes</entry>
        <entry>typical choice for integer</entry>
        <entry>-2147483648 to +2147483647</entry>
       </row>
       <row>
        <entry><type>bigint</></entry>
        <entry>8 bytes</entry>
        <entry>large-range integer</entry>
        <entry>-9223372036854775808 to +9223372036854775807</entry>
       </row>

       <row>
        <entry><type>decimal</></entry>
        <entry>variable</entry>
        <entry>user-specified precision, exact</entry>
        <entry>up to 131072 digits before the decimal point; up to 16383 digits after the decimal point</entry>
       </row>
       <row>
        <entry><type>numeric</></entry>
        <entry>variable</entry>
        <entry>user-specified precision, exact</entry>
        <entry>up to 131072 digits before the decimal point; up to 16383 digits after the decimal point</entry>
       </row>

       <row>
        <entry><type>real</></entry>
        <entry>4 bytes</entry>
        <entry>variable-precision, inexact</entry>
        <entry>6 decimal digits precision</entry>
       </row>
       <row>
        <entry><type>double precision</></entry>
        <entry>8 bytes</entry>
        <entry>variable-precision, inexact</entry>
        <entry>15 decimal digits precision</entry>
       </row>

       <row>
        <entry><type>smallserial</type></entry>
        <entry>2 bytes</entry>
        <entry>small autoincrementing integer</entry>
        <entry>1 to 32767</entry>
       </row>

       <row>
        <entry><type>serial</></entry>
        <entry>4 bytes</entry>
        <entry>autoincrementing integer</entry>
        <entry>1 to 2147483647</entry>
       </row>

       <row>
        <entry><type>bigserial</type></entry>
        <entry>8 bytes</entry>
        <entry>large autoincrementing integer</entry>
        <entry>1 to 9223372036854775807</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <para>
    The syntax of constants for the numeric types is described in
    <xref linkend="sql-syntax-constants">.  The numeric types have a
    full set of corresponding arithmetic operators and
    functions. Refer to <xref linkend="functions"> for more
    information.  The following sections describe the types in detail.
   </para>

   <sect2 id="datatype-int">
    <title>Integer Types</title>

    <indexterm zone="datatype-int">
     <primary>integer</primary>
    </indexterm>

    <indexterm zone="datatype-int">
     <primary>smallint</primary>
    </indexterm>

    <indexterm zone="datatype-int">
     <primary>bigint</primary>
    </indexterm>

    <indexterm>
     <primary>int4</primary>
     <see>integer</see>
    </indexterm>

    <indexterm>
     <primary>int2</primary>
     <see>smallint</see>
    </indexterm>

    <indexterm>
     <primary>int8</primary>
     <see>bigint</see>
    </indexterm>

    <para>
     The types <type>smallint</type>, <type>integer</type>, and
     <type>bigint</type> store whole numbers, that is, numbers without
     fractional components, of various ranges.  Attempts to store
     values outside of the allowed range will result in an error.
    </para>

    <para>
     The type <type>integer</type> is the common choice, as it offers
     the best balance between range, storage size, and performance.
     The <type>smallint</type> type is generally only used if disk
     space is at a premium.  The <type>bigint</type> type is designed to be
     used when the range of the <type>integer</type> type is insufficient.
    </para>

    <para>
     <acronym>SQL</acronym> only specifies the integer types
     <type>integer</type> (or <type>int</type>),
     <type>smallint</type>, and <type>bigint</type>.  The
     type names <type>int2</type>, <type>int4</type>, and
     <type>int8</type> are extensions, which are also used by some
     other <acronym>SQL</acronym> database systems.
    </para>

   </sect2>

   <sect2 id="datatype-numeric-decimal">
    <title>Arbitrary Precision Numbers</title>

    <indexterm>
     <primary>numeric (data type)</primary>
    </indexterm>

   <indexterm>
    <primary>arbitrary precision numbers</primary>
   </indexterm>

    <indexterm>
     <primary>decimal</primary>
     <see>numeric</see>
    </indexterm>

    <para>
     The type <type>numeric</type> can store numbers with a
     very large number of digits. It is especially recommended for
     storing monetary amounts and other quantities where exactness is
     required.  Calculations with <type>numeric</type> values yield exact
     results where possible, e.g.  addition, subtraction, multiplication.
     However, calculations on <type>numeric</type> values are very slow
     compared to the integer types, or to the floating-point types
     described in the next section.
    </para>

    <para>
     We use the following terms below:  The
     <firstterm>scale</firstterm> of a <type>numeric</type> is the
     count of decimal digits in the fractional part, to the right of
     the decimal point.  The <firstterm>precision</firstterm> of a
     <type>numeric</type> is the total count of significant digits in
     the whole number, that is, the number of digits to both sides of
     the decimal point.  So the number 23.5141 has a precision of 6
     and a scale of 4.  Integers can be considered to have a scale of
     zero.
    </para>

    <para>
     Both the maximum precision and the maximum scale of a
     <type>numeric</type> column can be
     configured.  To declare a column of type <type>numeric</type> use
     the syntax:
<programlisting>
NUMERIC(<replaceable>precision</replaceable>, <replaceable>scale</replaceable>)
</programlisting>
     The precision must be positive, the scale zero or positive.
     Alternatively:
<programlisting>
NUMERIC(<replaceable>precision</replaceable>)
</programlisting>
     selects a scale of 0.  Specifying:
<programlisting>
NUMERIC
</programlisting>
     without any precision or scale creates a column in which numeric
     values of any precision and scale can be stored, up to the
     implementation limit on precision.  A column of this kind will
     not coerce input values to any particular scale, whereas
     <type>numeric</type> columns with a declared scale will coerce
     input values to that scale.  (The <acronym>SQL</acronym> standard
     requires a default scale of 0, i.e., coercion to integer
     precision.  We find this a bit useless.  If you're concerned
     about portability, always specify the precision and scale
     explicitly.)
    </para>

    <note>
     <para>
      The maximum allowed precision when explicitly specified in the
      type declaration is 1000; <type>NUMERIC</type> without a specified
      precision is subject to the limits described in <xref
      linkend="datatype-numeric-table">.
     </para>
    </note>

    <para>
     If the scale of a value to be stored is greater than the declared
     scale of the column, the system will round the value to the specified
     number of fractional digits.  Then, if the number of digits to the
     left of the decimal point exceeds the declared precision minus the
     declared scale, an error is raised.
    </para>

    <para>
     Numeric values are physically stored without any extra leading or
     trailing zeroes.  Thus, the declared precision and scale of a column
     are maximums, not fixed allocations.  (In this sense the <type>numeric</>
     type is more akin to <type>varchar(<replaceable>n</>)</type>
     than to <type>char(<replaceable>n</>)</type>.)  The actual storage
     requirement is two bytes for each group of four decimal digits,
     plus three to eight bytes overhead.
    </para>

    <indexterm>
     <primary>NaN</primary>
     <see>not a number</see>
   </indexterm>

    <indexterm>
     <primary>not a number</primary>
     <secondary>numeric (data type)</secondary>
    </indexterm>

    <para>
     In addition to ordinary numeric values, the <type>numeric</type>
     type allows the special value <literal>NaN</>, meaning
     <quote>not-a-number</quote>.  Any operation on <literal>NaN</>
     yields another <literal>NaN</>.  When writing this value
     as a constant in an SQL command, you must put quotes around it,
     for example <literal>UPDATE table SET x = 'NaN'</>.  On input,
     the string <literal>NaN</> is recognized in a case-insensitive manner.
    </para>

    <note>
     <para>
      In most implementations of the <quote>not-a-number</> concept,
      <literal>NaN</> is not considered equal to any other numeric
      value (including <literal>NaN</>).  In order to allow
      <type>numeric</> values to be sorted and used in tree-based
      indexes, <productname>PostgreSQL</> treats <literal>NaN</>
      values as equal, and greater than all non-<literal>NaN</>
      values.
     </para>
    </note>

    <para>
     The types <type>decimal</type> and <type>numeric</type> are
     equivalent.  Both types are part of the <acronym>SQL</acronym>
     standard.
    </para>

    <para>
     When rounding values, the <type>numeric</type> type rounds ties away
     from zero, while (on most machines) the <type>real</type>
     and <type>double precision</type> types round ties to the nearest even
     number.  For example:

<programlisting>
SELECT x,
  round(x::numeric) AS num_round,
  round(x::double precision) AS dbl_round
FROM generate_series(-3.5, 3.5, 1) as x;
  x   | num_round | dbl_round
------+-----------+-----------
 -3.5 |        -4 |        -4
 -2.5 |        -3 |        -2
 -1.5 |        -2 |        -2
 -0.5 |        -1 |        -0
  0.5 |         1 |         0
  1.5 |         2 |         2
  2.5 |         3 |         2
  3.5 |         4 |         4
(8 rows)
</programlisting>
    </para>
   </sect2>


   <sect2 id="datatype-float">
    <title>Floating-Point Types</title>

    <indexterm zone="datatype-float">
     <primary>real</primary>
    </indexterm>

    <indexterm zone="datatype-float">
     <primary>double precision</primary>
    </indexterm>

    <indexterm>
     <primary>float4</primary>
     <see>real</see>
    </indexterm>

    <indexterm>
     <primary>float8</primary>
     <see>double precision</see>
    </indexterm>

    <indexterm zone="datatype-float">
     <primary>floating point</primary>
    </indexterm>

    <para>
     The data types <type>real</type> and <type>double
     precision</type> are inexact, variable-precision numeric types.
     In practice, these types are usually implementations of
     <acronym>IEEE</acronym> Standard 754 for Binary Floating-Point
     Arithmetic (single and double precision, respectively), to the
     extent that the underlying processor, operating system, and
     compiler support it.
    </para>

    <para>
     Inexact means that some values cannot be converted exactly to the
     internal format and are stored as approximations, so that storing
     and retrieving a value might show slight discrepancies.
     Managing these errors and how they propagate through calculations
     is the subject of an entire branch of mathematics and computer
     science and will not be discussed here, except for the
     following points:
     <itemizedlist>
      <listitem>
       <para>
        If you require exact storage and calculations (such as for
        monetary amounts), use the <type>numeric</type> type instead.
       </para>
      </listitem>

      <listitem>
       <para>
        If you want to do complicated calculations with these types
        for anything important, especially if you rely on certain
        behavior in boundary cases (infinity, underflow), you should
        evaluate the implementation carefully.
       </para>
      </listitem>

      <listitem>
       <para>
        Comparing two floating-point values for equality might not
        always work as expected.
       </para>
      </listitem>
     </itemizedlist>
    </para>

    <para>
     On most platforms, the <type>real</type> type has a range of at least
     1E-37 to 1E+37 with a precision of at least 6 decimal digits.  The
     <type>double precision</type> type typically has a range of around
     1E-307 to 1E+308 with a precision of at least 15 digits.  Values that
     are too large or too small will cause an error.  Rounding might
     take place if the precision of an input number is too high.
     Numbers too close to zero that are not representable as distinct
     from zero will cause an underflow error.
    </para>

    <note>
     <para>
      The <xref linkend="guc-extra-float-digits"> setting controls the
      number of extra significant digits included when a floating point
      value is converted to text for output.  With the default value of
      <literal>0</literal>, the output is the same on every platform
      supported by PostgreSQL.  Increasing it will produce output that
      more accurately represents the stored value, but may be unportable.
     </para>
    </note>

    <indexterm>
     <primary>not a number</primary>
     <secondary>double precision</secondary>
    </indexterm>

    <para>
     In addition to ordinary numeric values, the floating-point types
     have several special values:
<literallayout>
<literal>Infinity</literal>
<literal>-Infinity</literal>
<literal>NaN</literal>
</literallayout>
     These represent the IEEE 754 special values
     <quote>infinity</quote>, <quote>negative infinity</quote>, and
     <quote>not-a-number</quote>, respectively.  (On a machine whose
     floating-point arithmetic does not follow IEEE 754, these values
     will probably not work as expected.)  When writing these values
     as constants in an SQL command, you must put quotes around them,
     for example <literal>UPDATE table SET x = 'Infinity'</>.  On input,
     these strings are recognized in a case-insensitive manner.
    </para>

    <note>
     <para>
      IEEE754 specifies that <literal>NaN</> should not compare equal
      to any other floating-point value (including <literal>NaN</>).
      In order to allow floating-point values to be sorted and used
      in tree-based indexes, <productname>PostgreSQL</> treats
      <literal>NaN</> values as equal, and greater than all
      non-<literal>NaN</> values.
     </para>
    </note>

    <para>
     <productname>PostgreSQL</productname> also supports the SQL-standard
     notations <type>float</type> and
     <type>float(<replaceable>p</replaceable>)</type> for specifying
     inexact numeric types.  Here, <replaceable>p</replaceable> specifies
     the minimum acceptable precision in <emphasis>binary</> digits.
     <productname>PostgreSQL</productname> accepts
     <type>float(1)</type> to <type>float(24)</type> as selecting the
     <type>real</type> type, while
     <type>float(25)</type> to <type>float(53)</type> select
     <type>double precision</type>.  Values of <replaceable>p</replaceable>
     outside the allowed range draw an error.
     <type>float</type> with no precision specified is taken to mean
     <type>double precision</type>.
    </para>

    <note>
     <para>
      The assumption that <type>real</type> and
      <type>double precision</type> have exactly 24 and 53 bits in the
      mantissa respectively is correct for IEEE-standard floating point
      implementations.  On non-IEEE platforms it might be off a little, but
      for simplicity the same ranges of <replaceable>p</replaceable> are used
      on all platforms.
     </para>
    </note>

   </sect2>

   <sect2 id="datatype-serial">
    <title>Serial Types</title>

    <indexterm zone="datatype-serial">
     <primary>smallserial</primary>
    </indexterm>

    <indexterm zone="datatype-serial">
     <primary>serial</primary>
    </indexterm>

    <indexterm zone="datatype-serial">
     <primary>bigserial</primary>
    </indexterm>

    <indexterm zone="datatype-serial">
     <primary>serial2</primary>
    </indexterm>

    <indexterm zone="datatype-serial">
     <primary>serial4</primary>
    </indexterm>

    <indexterm zone="datatype-serial">
     <primary>serial8</primary>
    </indexterm>

    <indexterm>
     <primary>auto-increment</primary>
     <see>serial</see>
    </indexterm>

    <indexterm>
     <primary>sequence</primary>
     <secondary>and serial type</secondary>
    </indexterm>

    <para>
     The data types <type>smallserial</type>, <type>serial</type> and
     <type>bigserial</type> are not true types, but merely
     a notational convenience for creating unique identifier columns
     (similar to the <literal>AUTO_INCREMENT</literal> property
     supported by some other databases). In the current
     implementation, specifying:

<programlisting>
CREATE TABLE <replaceable class="parameter">tablename</replaceable> (
    <replaceable class="parameter">colname</replaceable> SERIAL
);
</programlisting>

     is equivalent to specifying:

<programlisting>
CREATE SEQUENCE <replaceable class="parameter">tablename</replaceable>_<replaceable class="parameter">colname</replaceable>_seq;
CREATE TABLE <replaceable class="parameter">tablename</replaceable> (
    <replaceable class="parameter">colname</replaceable> integer NOT NULL DEFAULT nextval('<replaceable class="parameter">tablename</replaceable>_<replaceable class="parameter">colname</replaceable>_seq')
);
ALTER SEQUENCE <replaceable class="parameter">tablename</replaceable>_<replaceable class="parameter">colname</replaceable>_seq OWNED BY <replaceable class="parameter">tablename</replaceable>.<replaceable class="parameter">colname</replaceable>;
</programlisting>

     Thus, we have created an integer column and arranged for its default
     values to be assigned from a sequence generator.  A <literal>NOT NULL</>
     constraint is applied to ensure that a null value cannot be
     inserted.  (In most cases you would also want to attach a
     <literal>UNIQUE</> or <literal>PRIMARY KEY</> constraint to prevent
     duplicate values from being inserted by accident, but this is
     not automatic.)  Lastly, the sequence is marked as <quote>owned by</>
     the column, so that it will be dropped if the column or table is dropped.
    </para>

    <note>
      <para>
        Because <type>smallserial</type>, <type>serial</type> and
        <type>bigserial</type> are implemented using sequences, there may
        be "holes" or gaps in the sequence of values which appears in the
        column, even if no rows are ever deleted.  A value allocated
        from the sequence is still "used up" even if a row containing that
        value is never successfully inserted into the table column.  This
        may happen, for example, if the inserting transaction rolls back.
        See <literal>nextval()</literal> in <xref linkend="functions-sequence">
        for details.
      </para>
    </note>

    <para>
     To insert the next value of the sequence into the <type>serial</type>
     column, specify that the <type>serial</type>
     column should be assigned its default value. This can be done
     either by excluding the column from the list of columns in
     the <command>INSERT</command> statement, or through the use of
     the <literal>DEFAULT</literal> key word.
    </para>

    <para>
     The type names <type>serial</type> and <type>serial4</type> are
     equivalent: both create <type>integer</type> columns.  The type
     names <type>bigserial</type> and <type>serial8</type> work
     the same way, except that they create a <type>bigint</type>
     column.  <type>bigserial</type> should be used if you anticipate
     the use of more than 2<superscript>31</> identifiers over the
     lifetime of the table. The type names <type>smallserial</type> and
     <type>serial2</type> also work the same way, except that they
     create a <type>smallint</type> column.
    </para>

    <para>
     The sequence created for a <type>serial</type> column is
     automatically dropped when the owning column is dropped.
     You can drop the sequence without dropping the column, but this
     will force removal of the column default expression.
    </para>
   </sect2>
  </sect1>

  <sect1 id="datatype-money">
   <title>Monetary Types</title>

   <para>
    The <type>money</type> type stores a currency amount with a fixed
    fractional precision; see <xref
    linkend="datatype-money-table">.  The fractional precision is
    determined by the database's <xref linkend="guc-lc-monetary"> setting.
    The range shown in the table assumes there are two fractional digits.
    Input is accepted in a variety of formats, including integer and
    floating-point literals, as well as typical
    currency formatting, such as <literal>'$1,000.00'</literal>.
    Output is generally in the latter form but depends on the locale.
   </para>

    <table id="datatype-money-table">
     <title>Monetary Types</title>
     <tgroup cols="4">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
        <entry>Range</entry>
       </row>
      </thead>
      <tbody>
       <row>
        <entry>money</entry>
        <entry>8 bytes</entry>
        <entry>currency amount</entry>
        <entry>-92233720368547758.08 to +92233720368547758.07</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <para>
    Since the output of this data type is locale-sensitive, it might not
    work to load <type>money</> data into a database that has a different
    setting of <varname>lc_monetary</>.  To avoid problems, before
    restoring a dump into a new database make sure <varname>lc_monetary</> has
    the same or equivalent value as in the database that was dumped.
   </para>

   <para>
    Values of the <type>numeric</type>, <type>int</type>, and
    <type>bigint</type> data types can be cast to <type>money</type>.
    Conversion from the <type>real</type> and <type>double precision</type>
    data types can be done by casting to <type>numeric</type> first, for
    example:
<programlisting>
SELECT '12.34'::float8::numeric::money;
</programlisting>
    However, this is not recommended.  Floating point numbers should not be
    used to handle money due to the potential for rounding errors.
   </para>

   <para>
    A <type>money</type> value can be cast to <type>numeric</type> without
    loss of precision. Conversion to other types could potentially lose
    precision, and must also be done in two stages:
<programlisting>
SELECT '52093.89'::money::numeric::float8;
</programlisting>
   </para>

   <para>
    When a <type>money</type> value is divided by another <type>money</type>
    value, the result is <type>double precision</type> (i.e., a pure number,
    not money); the currency units cancel each other out in the division.
   </para>
  </sect1>


  <sect1 id="datatype-character">
   <title>Character Types</title>

   <indexterm zone="datatype-character">
    <primary>character string</primary>
    <secondary>data types</secondary>
   </indexterm>

   <indexterm>
    <primary>string</primary>
    <see>character string</see>
   </indexterm>

   <indexterm zone="datatype-character">
    <primary>character</primary>
   </indexterm>

   <indexterm zone="datatype-character">
    <primary>character varying</primary>
   </indexterm>

   <indexterm zone="datatype-character">
    <primary>text</primary>
   </indexterm>

   <indexterm zone="datatype-character">
    <primary>char</primary>
   </indexterm>

   <indexterm zone="datatype-character">
    <primary>varchar</primary>
   </indexterm>

    <table id="datatype-character-table">
     <title>Character Types</title>
     <tgroup cols="2">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Description</entry>
       </row>
      </thead>
      <tbody>
       <row>
        <entry><type>character varying(<replaceable>n</>)</type>, <type>varchar(<replaceable>n</>)</type></entry>
        <entry>variable-length with limit</entry>
       </row>
       <row>
        <entry><type>character(<replaceable>n</>)</type>, <type>char(<replaceable>n</>)</type></entry>
        <entry>fixed-length, blank padded</entry>
       </row>
       <row>
        <entry><type>text</type></entry>
        <entry>variable unlimited length</entry>
       </row>
     </tbody>
     </tgroup>
    </table>

   <para>
    <xref linkend="datatype-character-table"> shows the
    general-purpose character types available in
    <productname>PostgreSQL</productname>.
   </para>

   <para>
    <acronym>SQL</acronym> defines two primary character types:
    <type>character varying(<replaceable>n</>)</type> and
    <type>character(<replaceable>n</>)</type>, where <replaceable>n</>
    is a positive integer.  Both of these types can store strings up to
    <replaceable>n</> characters (not bytes) in length.  An attempt to store a
    longer string into a column of these types will result in an
    error, unless the excess characters are all spaces, in which case
    the string will be truncated to the maximum length. (This somewhat
    bizarre exception is required by the <acronym>SQL</acronym>
    standard.) If the string to be stored is shorter than the declared
    length, values of type <type>character</type> will be space-padded;
    values of type <type>character varying</type> will simply store the
    shorter
    string.
   </para>

   <para>
    If one explicitly casts a value to <type>character
    varying(<replaceable>n</>)</type> or
    <type>character(<replaceable>n</>)</type>, then an over-length
    value will be truncated to <replaceable>n</> characters without
    raising an error. (This too is required by the
    <acronym>SQL</acronym> standard.)
   </para>

   <para>
    The notations <type>varchar(<replaceable>n</>)</type> and
    <type>char(<replaceable>n</>)</type> are aliases for <type>character
    varying(<replaceable>n</>)</type> and
    <type>character(<replaceable>n</>)</type>, respectively.
    <type>character</type> without length specifier is equivalent to
    <type>character(1)</type>. If <type>character varying</type> is used
    without length specifier, the type accepts strings of any size. The
    latter is a <productname>PostgreSQL</> extension.
   </para>

   <para>
    In addition, <productname>PostgreSQL</productname> provides the
    <type>text</type> type, which stores strings of any length.
    Although the type <type>text</type> is not in the
    <acronym>SQL</acronym> standard, several other SQL database
    management systems have it as well.
   </para>

   <para>
    Values of type <type>character</type> are physically padded
    with spaces to the specified width <replaceable>n</>, and are
    stored and displayed that way.  However, trailing spaces are treated as
    semantically insignificant and disregarded when comparing two values
    of type <type>character</type>.  In collations where whitespace
    is significant, this behavior can produce unexpected results;
    for example <command>SELECT 'a '::CHAR(2) collate "C" &lt;
    E'a\n'::CHAR(2)</command> returns true, even though <literal>C</>
    locale would consider a space to be greater than a newline.
    Trailing spaces are removed when converting a <type>character</type> value
    to one of the other string types.  Note that trailing spaces
    <emphasis>are</> semantically significant in
    <type>character varying</type> and <type>text</type> values, and
    when using pattern matching, that is <literal>LIKE</> and
    regular expressions.
   </para>

   <para>
    The storage requirement for a short string (up to 126 bytes) is 1 byte
    plus the actual string, which includes the space padding in the case of
    <type>character</type>.  Longer strings have 4 bytes of overhead instead
    of 1.  Long strings are compressed by the system automatically, so
    the physical requirement on disk might be less. Very long values are also
    stored in background tables so that they do not interfere with rapid
    access to shorter column values. In any case, the longest
    possible character string that can be stored is about 1 GB. (The
    maximum value that will be allowed for <replaceable>n</> in the data
    type declaration is less than that. It wouldn't be useful to
    change this because with multibyte character encodings the number of
    characters and bytes can be quite different. If you desire to
    store long strings with no specific upper limit, use
    <type>text</type> or <type>character varying</type> without a length
    specifier, rather than making up an arbitrary length limit.)
   </para>

   <tip>
    <para>
     There is no performance difference among these three types,
     apart from increased storage space when using the blank-padded
     type, and a few extra CPU cycles to check the length when storing into
     a length-constrained column.  While
     <type>character(<replaceable>n</>)</type> has performance
     advantages in some other database systems, there is no such advantage in
     <productname>PostgreSQL</productname>; in fact
     <type>character(<replaceable>n</>)</type> is usually the slowest of
     the three because of its additional storage costs.  In most situations
     <type>text</type> or <type>character varying</type> should be used
     instead.
    </para>
   </tip>

   <para>
    Refer to <xref linkend="sql-syntax-strings"> for information about
    the syntax of string literals, and to <xref linkend="functions">
    for information about available operators and functions. The
    database character set determines the character set used to store
    textual values; for more information on character set support,
    refer to <xref linkend="multibyte">.
   </para>

   <example>
    <title>Using the Character Types</title>

<programlisting>
CREATE TABLE test1 (a character(4));
INSERT INTO test1 VALUES ('ok');
SELECT a, char_length(a) FROM test1; -- <co id="co.datatype-char">
<computeroutput>
  a   | char_length
------+-------------
 ok   |           2
</computeroutput>

CREATE TABLE test2 (b varchar(5));
INSERT INTO test2 VALUES ('ok');
INSERT INTO test2 VALUES ('good      ');
INSERT INTO test2 VALUES ('too long');
<computeroutput>ERROR:  value too long for type character varying(5)</computeroutput>
INSERT INTO test2 VALUES ('too long'::varchar(5)); -- explicit truncation
SELECT b, char_length(b) FROM test2;
<computeroutput>
   b   | char_length
-------+-------------
 ok    |           2
 good  |           5
 too l |           5
</computeroutput>
</programlisting>
    <calloutlist>
     <callout arearefs="co.datatype-char">
      <para>
       The <function>char_length</function> function is discussed in
       <xref linkend="functions-string">.
      </para>
     </callout>
    </calloutlist>
   </example>

   <para>
    There are two other fixed-length character types in
    <productname>PostgreSQL</productname>, shown in <xref
    linkend="datatype-character-special-table">. The <type>name</type>
    type exists <emphasis>only</emphasis> for the storage of identifiers
    in the internal system catalogs and is not intended for use by the general user. Its
    length is currently defined as 64 bytes (63 usable characters plus
    terminator) but should be referenced using the constant
    <symbol>NAMEDATALEN</symbol> in <literal>C</> source code.
    The length is set at compile time (and
    is therefore adjustable for special uses); the default maximum
    length might change in a future release. The type <type>"char"</type>
    (note the quotes) is different from <type>char(1)</type> in that it
    only uses one byte of storage. It is internally used in the system
    catalogs as a simplistic enumeration type.
   </para>

    <table id="datatype-character-special-table">
     <title>Special Character Types</title>
     <tgroup cols="3">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
       </row>
      </thead>
      <tbody>
       <row>
        <entry><type>"char"</type></entry>
        <entry>1 byte</entry>
        <entry>single-byte internal type</entry>
       </row>
       <row>
        <entry><type>name</type></entry>
        <entry>64 bytes</entry>
        <entry>internal type for object names</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

  </sect1>

 <sect1 id="datatype-binary">
  <title>Binary Data Types</title>

  <indexterm zone="datatype-binary">
   <primary>binary data</primary>
  </indexterm>

  <indexterm zone="datatype-binary">
   <primary>bytea</primary>
  </indexterm>

   <para>
    The <type>bytea</type> data type allows storage of binary strings;
    see <xref linkend="datatype-binary-table">.
   </para>

   <table id="datatype-binary-table">
    <title>Binary Data Types</title>
    <tgroup cols="3">
     <thead>
      <row>
       <entry>Name</entry>
       <entry>Storage Size</entry>
       <entry>Description</entry>
      </row>
     </thead>
     <tbody>
      <row>
       <entry><type>bytea</type></entry>
       <entry>1 or 4 bytes plus the actual binary string</entry>
       <entry>variable-length binary string</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    A binary string is a sequence of octets (or bytes).  Binary
    strings are distinguished from character strings in two
    ways.  First, binary strings specifically allow storing
    octets of value zero and other <quote>non-printable</quote>
    octets (usually, octets outside the range 32 to 126).
    Character strings disallow zero octets, and also disallow any
    other octet values and sequences of octet values that are invalid
    according to the database's selected character set encoding.
    Second, operations on binary strings process the actual bytes,
    whereas the processing of character strings depends on locale settings.
    In short, binary strings are appropriate for storing data that the
    programmer thinks of as <quote>raw bytes</>, whereas character
    strings are appropriate for storing text.
   </para>

   <para>
    The <type>bytea</type> type supports two external formats for
    input and output: <productname>PostgreSQL</productname>'s historical
    <quote>escape</quote> format, and <quote>hex</quote> format.  Both
    of these are always accepted on input.  The output format depends
    on the configuration parameter <xref linkend="guc-bytea-output">;
    the default is hex.  (Note that the hex format was introduced in
    <productname>PostgreSQL</productname> 9.0; earlier versions and some
    tools don't understand it.)
   </para>

   <para>
    The <acronym>SQL</acronym> standard defines a different binary
    string type, called <type>BLOB</type> or <type>BINARY LARGE
    OBJECT</type>.  The input format is different from
    <type>bytea</type>, but the provided functions and operators are
    mostly the same.
   </para>

  <sect2>
   <title><type>bytea</> Hex Format</title>

   <para>
    The <quote>hex</> format encodes binary data as 2 hexadecimal digits
    per byte, most significant nibble first.  The entire string is
    preceded by the sequence <literal>\x</literal> (to distinguish it
    from the escape format).  In some contexts, the initial backslash may
    need to be escaped by doubling it, in the same cases in which backslashes
    have to be doubled in escape format; details appear below.
    The hexadecimal digits can
    be either upper or lower case, and whitespace is permitted between
    digit pairs (but not within a digit pair nor in the starting
    <literal>\x</literal> sequence).
    The hex format is compatible with a wide
    range of external applications and protocols, and it tends to be
    faster to convert than the escape format, so its use is preferred.
   </para>

   <para>
    Example:
<programlisting>
SELECT E'\\xDEADBEEF';
</programlisting>
   </para>
  </sect2>

  <sect2>
   <title><type>bytea</> Escape Format</title>

   <para>
    The <quote>escape</quote> format is the traditional
    <productname>PostgreSQL</productname> format for the <type>bytea</type>
    type.  It
    takes the approach of representing a binary string as a sequence
    of ASCII characters, while converting those bytes that cannot be
    represented as an ASCII character into special escape sequences.
    If, from the point of view of the application, representing bytes
    as characters makes sense, then this representation can be
    convenient.  But in practice it is usually confusing because it
    fuzzes up the distinction between binary strings and character
    strings, and also the particular escape mechanism that was chosen is
    somewhat unwieldy.  So this format should probably be avoided
    for most new applications.
   </para>

   <para>
    When entering <type>bytea</type> values in escape format,
    octets of certain
    values <emphasis>must</emphasis> be escaped, while all octet
    values <emphasis>can</emphasis> be escaped.  In
    general, to escape an octet, convert it into its three-digit
    octal value and precede it
    by a backslash (or two backslashes, if writing the value as a
    literal using escape string syntax).
    Backslash itself (octet value 92) can alternatively be represented by
    double backslashes.
    <xref linkend="datatype-binary-sqlesc">
    shows the characters that must be escaped, and gives the alternative
    escape sequences where applicable.
   </para>

   <table id="datatype-binary-sqlesc">
    <title><type>bytea</> Literal Escaped Octets</title>
    <tgroup cols="5">
     <thead>
      <row>
       <entry>Decimal Octet Value</entry>
       <entry>Description</entry>
       <entry>Escaped Input Representation</entry>
       <entry>Example</entry>
       <entry>Output Representation</entry>
      </row>
     </thead>

     <tbody>
      <row>
       <entry>0</entry>
       <entry>zero octet</entry>
       <entry><literal>E'\\000'</literal></entry>
       <entry><literal>SELECT E'\\000'::bytea;</literal></entry>
       <entry><literal>\000</literal></entry>
      </row>

      <row>
       <entry>39</entry>
       <entry>single quote</entry>
       <entry><literal>''''</literal> or <literal>E'\\047'</literal></entry>
       <entry><literal>SELECT E'\''::bytea;</literal></entry>
       <entry><literal>'</literal></entry>
      </row>

      <row>
       <entry>92</entry>
       <entry>backslash</entry>
       <entry><literal>E'\\\\'</literal> or <literal>E'\\134'</literal></entry>
       <entry><literal>SELECT E'\\\\'::bytea;</literal></entry>
       <entry><literal>\\</literal></entry>
      </row>

      <row>
       <entry>0 to 31 and 127 to 255</entry>
       <entry><quote>non-printable</quote> octets</entry>
       <entry><literal>E'\\<replaceable>xxx'</></literal> (octal value)</entry>
       <entry><literal>SELECT E'\\001'::bytea;</literal></entry>
       <entry><literal>\001</literal></entry>
      </row>

     </tbody>
    </tgroup>
   </table>

   <para>
    The requirement to escape <emphasis>non-printable</emphasis> octets
    varies depending on locale settings. In some instances you can get away
    with leaving them unescaped. Note that the result in each of the examples
    in <xref linkend="datatype-binary-sqlesc"> was exactly one octet in
    length, even though the output representation is sometimes
    more than one character.
   </para>

   <para>
    The reason multiple backslashes are required, as shown
    in <xref linkend="datatype-binary-sqlesc">, is that an input
    string written as a string literal must pass through two parse
    phases in the <productname>PostgreSQL</productname> server.
    The first backslash of each pair is interpreted as an escape
    character by the string-literal parser (assuming escape string
    syntax is used) and is therefore consumed, leaving the second backslash of the
    pair.  (Dollar-quoted strings can be used to avoid this level
    of escaping.)  The remaining backslash is then recognized by the
    <type>bytea</type> input function as starting either a three
    digit octal value or escaping another backslash.  For example,
    a string literal passed to the server as <literal>E'\\001'</literal>
    becomes <literal>\001</literal> after passing through the
    escape string parser. The <literal>\001</literal> is then sent
    to the <type>bytea</type> input function, where it is converted
    to a single octet with a decimal value of 1.  Note that the
    single-quote character is not treated specially by <type>bytea</type>,
    so it follows the normal rules for string literals.  (See also
    <xref linkend="sql-syntax-strings">.)
   </para>

   <para>
    <type>Bytea</type> octets are sometimes escaped when output. In general, each
    <quote>non-printable</quote> octet is converted into
    its equivalent three-digit octal value and preceded by one backslash.
    Most <quote>printable</quote> octets are represented by their standard
    representation in the client character set. The octet with decimal
    value 92 (backslash) is doubled in the output.
    Details are in <xref linkend="datatype-binary-resesc">.
   </para>

   <table id="datatype-binary-resesc">
    <title><type>bytea</> Output Escaped Octets</title>
    <tgroup cols="5">
     <thead>
      <row>
       <entry>Decimal Octet Value</entry>
       <entry>Description</entry>
       <entry>Escaped Output Representation</entry>
       <entry>Example</entry>
       <entry>Output Result</entry>
      </row>
     </thead>

     <tbody>

      <row>
       <entry>92</entry>
       <entry>backslash</entry>
       <entry><literal>\\</literal></entry>
       <entry><literal>SELECT E'\\134'::bytea;</literal></entry>
       <entry><literal>\\</literal></entry>
      </row>

      <row>
       <entry>0 to 31 and 127 to 255</entry>
       <entry><quote>non-printable</quote> octets</entry>
       <entry><literal>\<replaceable>xxx</></literal> (octal value)</entry>
       <entry><literal>SELECT E'\\001'::bytea;</literal></entry>
       <entry><literal>\001</literal></entry>
      </row>

      <row>
       <entry>32 to 126</entry>
       <entry><quote>printable</quote> octets</entry>
       <entry>client character set representation</entry>
       <entry><literal>SELECT E'\\176'::bytea;</literal></entry>
       <entry><literal>~</literal></entry>
      </row>

     </tbody>
    </tgroup>
   </table>

   <para>
    Depending on the front end to <productname>PostgreSQL</> you use,
    you might have additional work to do in terms of escaping and
    unescaping <type>bytea</type> strings. For example, you might also
    have to escape line feeds and carriage returns if your interface
    automatically translates these.
   </para>
  </sect2>
 </sect1>


  <sect1 id="datatype-datetime">
   <title>Date/Time Types</title>

   <indexterm zone="datatype-datetime">
    <primary>date</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>time</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>time without time zone</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>time with time zone</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>timestamp</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>timestamptz</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>timestamp with time zone</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>timestamp without time zone</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>interval</primary>
   </indexterm>
   <indexterm zone="datatype-datetime">
    <primary>time span</primary>
   </indexterm>

   <para>
    <productname>PostgreSQL</productname> supports the full set of
    <acronym>SQL</acronym> date and time types, shown in <xref
    linkend="datatype-datetime-table">.  The operations available
    on these data types are described in
    <xref linkend="functions-datetime">.
    Dates are counted according to the Gregorian calendar, even in
    years before that calendar was introduced (see <xref
    linkend="datetime-units-history"> for more information).
   </para>

    <table id="datatype-datetime-table">
     <title>Date/Time Types</title>
     <tgroup cols="6">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
        <entry>Low Value</entry>
        <entry>High Value</entry>
        <entry>Resolution</entry>
       </row>
      </thead>
      <tbody>
       <row>
        <entry><type>timestamp [ (<replaceable>p</replaceable>) ] [ without time zone ]</type></entry>
        <entry>8 bytes</entry>
        <entry>both date and time (no time zone)</entry>
        <entry>4713 BC</entry>
        <entry>294276 AD</entry>
        <entry>1 microsecond / 14 digits</entry>
       </row>
       <row>
        <entry><type>timestamp [ (<replaceable>p</replaceable>) ] with time zone</type></entry>
        <entry>8 bytes</entry>
        <entry>both date and time, with time zone</entry>
        <entry>4713 BC</entry>
        <entry>294276 AD</entry>
        <entry>1 microsecond / 14 digits</entry>
       </row>
       <row>
        <entry><type>date</type></entry>
        <entry>4 bytes</entry>
        <entry>date (no time of day)</entry>
        <entry>4713 BC</entry>
        <entry>5874897 AD</entry>
        <entry>1 day</entry>
       </row>
       <row>
        <entry><type>time [ (<replaceable>p</replaceable>) ] [ without time zone ]</type></entry>
        <entry>8 bytes</entry>
        <entry>time of day (no date)</entry>
        <entry>00:00:00</entry>
        <entry>24:00:00</entry>
        <entry>1 microsecond / 14 digits</entry>
       </row>
       <row>
        <entry><type>time [ (<replaceable>p</replaceable>) ] with time zone</type></entry>
        <entry>12 bytes</entry>
        <entry>times of day only, with time zone</entry>
        <entry>00:00:00+1459</entry>
        <entry>24:00:00-1459</entry>
        <entry>1 microsecond / 14 digits</entry>
       </row>
       <row>
        <entry><type>interval [ <replaceable>fields</replaceable> ] [ (<replaceable>p</replaceable>) ]</type></entry>
        <entry>16 bytes</entry>
        <entry>time interval</entry>
        <entry>-178000000 years</entry>
        <entry>178000000 years</entry>
        <entry>1 microsecond / 14 digits</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <note>
    <para>
     The SQL standard requires that writing just <type>timestamp</type>
     be equivalent to <type>timestamp without time
     zone</type>, and <productname>PostgreSQL</productname> honors that
     behavior.  <type>timestamptz</type> is accepted as an
     abbreviation for <type>timestamp with time zone</type>; this is a
     <productname>PostgreSQL</productname> extension.
    </para>
   </note>

   <para>
    <type>time</type>, <type>timestamp</type>, and
    <type>interval</type> accept an optional precision value
    <replaceable>p</replaceable> which specifies the number of
    fractional digits retained in the seconds field. By default, there
    is no explicit bound on precision.  The allowed range of
    <replaceable>p</replaceable> is from 0 to 6 for the
    <type>timestamp</type> and <type>interval</type> types.
   </para>

   <note>
   <para>
    When <type>timestamp</> values are stored as eight-byte integers
    (currently the default), microsecond precision is available over
    the full range of values.  In this case, the internal representation
    is the number of microseconds before or after midnight 2000-01-01.
    When <type>timestamp</> values are stored as double precision
    floating-point numbers (a deprecated compile-time option), the
    internal representation is the number of seconds before or after
    midnight 2000-01-01.  With this representation, the effective limit
    of precision might be less than 6; in practice,
    microsecond precision is achieved for dates within a few
    years of 2000-01-01, but the precision degrades for dates further
    away. Note that using floating-point datetimes allows a larger
    range of <type>timestamp</type> values to be represented than
    shown above: from 4713 BC up to 5874897 AD.
   </para>

   <para>
    The same compile-time option also determines whether
    <type>time</type> and <type>interval</type> values are stored as
    floating-point numbers or eight-byte integers.  In the
    floating-point case, large <type>interval</type> values degrade in
    precision as the size of the interval increases.
   </para>
   </note>

   <para>
    For the <type>time</type> types, the allowed range of
    <replaceable>p</replaceable> is from 0 to 6 when eight-byte integer
    storage is used, or from 0 to 10 when floating-point storage is used.
   </para>

   <para>
    The <type>interval</type> type has an additional option, which is
    to restrict the set of stored fields by writing one of these phrases:
<literallayout class="monospaced">
YEAR
MONTH
DAY
HOUR
MINUTE
SECOND
YEAR TO MONTH
DAY TO HOUR
DAY TO MINUTE
DAY TO SECOND
HOUR TO MINUTE
HOUR TO SECOND
MINUTE TO SECOND
</literallayout>
    Note that if both <replaceable>fields</replaceable> and
    <replaceable>p</replaceable> are specified, the
    <replaceable>fields</replaceable> must include <literal>SECOND</>,
    since the precision applies only to the seconds.
   </para>

   <para>
    The type <type>time with time zone</type> is defined by the SQL
    standard, but the definition exhibits properties which lead to
    questionable usefulness. In most cases, a combination of
    <type>date</type>, <type>time</type>, <type>timestamp without time
    zone</type>, and <type>timestamp with time zone</type> should
    provide a complete range of date/time functionality required by
    any application.
   </para>

   <para>
    The types <type>abstime</type>
    and <type>reltime</type> are lower precision types which are used internally.
    You are discouraged from using these types in
    applications;  these internal types
    might disappear in a future release.
   </para>

   <sect2 id="datatype-datetime-input">
    <title>Date/Time Input</title>

    <para>
     Date and time input is accepted in almost any reasonable format, including
     ISO 8601, <acronym>SQL</acronym>-compatible,
     traditional <productname>POSTGRES</productname>, and others.
     For some formats, ordering of day, month, and year in date input is
     ambiguous and there is support for specifying the expected
     ordering of these fields.  Set the <xref linkend="guc-datestyle"> parameter
     to <literal>MDY</> to select month-day-year interpretation,
     <literal>DMY</> to select day-month-year interpretation, or
     <literal>YMD</> to select year-month-day interpretation.
    </para>

    <para>
     <productname>PostgreSQL</productname> is more flexible in
     handling date/time input than the
     <acronym>SQL</acronym> standard requires.
     See <xref linkend="datetime-appendix">
     for the exact parsing rules of date/time input and for the
     recognized text fields including months, days of the week, and
     time zones.
    </para>

    <para>
     Remember that any date or time literal input needs to be enclosed
     in single quotes, like text strings.  Refer to
     <xref linkend="sql-syntax-constants-generic"> for more
     information.
     <acronym>SQL</acronym> requires the following syntax
<synopsis>
<replaceable>type</replaceable> [ (<replaceable>p</replaceable>) ] '<replaceable>value</replaceable>'
</synopsis>
     where <replaceable>p</replaceable> is an optional precision
     specification giving the number of
     fractional digits in the seconds field. Precision can be
     specified for <type>time</type>, <type>timestamp</type>, and
     <type>interval</type> types.  The allowed values are mentioned
     above.  If no precision is specified in a constant specification,
     it defaults to the precision of the literal value.
    </para>

    <sect3>
    <title>Dates</title>

    <indexterm>
     <primary>date</primary>
    </indexterm>

    <para>
     <xref linkend="datatype-datetime-date-table"> shows some possible
     inputs for the <type>date</type> type.
    </para>

     <table id="datatype-datetime-date-table">
      <title>Date Input</title>
      <tgroup cols="2">
       <thead>
        <row>
         <entry>Example</entry>
         <entry>Description</entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry>1999-01-08</entry>
         <entry>ISO 8601; January 8 in any mode
         (recommended format)</entry>
        </row>
        <row>
         <entry>January 8, 1999</entry>
         <entry>unambiguous in any <varname>datestyle</varname> input mode</entry>
        </row>
        <row>
         <entry>1/8/1999</entry>
         <entry>January 8 in <literal>MDY</> mode;
          August 1 in <literal>DMY</> mode</entry>
        </row>
        <row>
         <entry>1/18/1999</entry>
         <entry>January 18 in <literal>MDY</> mode;
          rejected in other modes</entry>
        </row>
        <row>
         <entry>01/02/03</entry>
         <entry>January 2, 2003 in <literal>MDY</> mode;
          February 1, 2003 in <literal>DMY</> mode;
          February 3, 2001 in <literal>YMD</> mode
         </entry>
        </row>
        <row>
         <entry>1999-Jan-08</entry>
         <entry>January 8 in any mode</entry>
        </row>
        <row>
         <entry>Jan-08-1999</entry>
         <entry>January 8 in any mode</entry>
        </row>
        <row>
         <entry>08-Jan-1999</entry>
         <entry>January 8 in any mode</entry>
        </row>
        <row>
         <entry>99-Jan-08</entry>
         <entry>January 8 in <literal>YMD</> mode, else error</entry>
        </row>
        <row>
         <entry>08-Jan-99</entry>
         <entry>January 8, except error in <literal>YMD</> mode</entry>
        </row>
        <row>
         <entry>Jan-08-99</entry>
         <entry>January 8, except error in <literal>YMD</> mode</entry>
        </row>
        <row>
         <entry>19990108</entry>
         <entry>ISO 8601; January 8, 1999 in any mode</entry>
        </row>
        <row>
         <entry>990108</entry>
         <entry>ISO 8601; January 8, 1999 in any mode</entry>
        </row>
        <row>
         <entry>1999.008</entry>
         <entry>year and day of year</entry>
        </row>
        <row>
         <entry>J2451187</entry>
         <entry>Julian date</entry>
        </row>
        <row>
         <entry>January 8, 99 BC</entry>
         <entry>year 99 BC</entry>
        </row>
       </tbody>
      </tgroup>
     </table>
    </sect3>

    <sect3>
     <title>Times</title>

     <indexterm>
      <primary>time</primary>
     </indexterm>
     <indexterm>
      <primary>time without time zone</primary>
     </indexterm>
     <indexterm>
      <primary>time with time zone</primary>
     </indexterm>

     <para>
      The time-of-day types are <type>time [
      (<replaceable>p</replaceable>) ] without time zone</type> and
      <type>time [ (<replaceable>p</replaceable>) ] with time
      zone</type>.  <type>time</type> alone is equivalent to
      <type>time without time zone</type>.
     </para>

     <para>
      Valid input for these types consists of a time of day followed
      by an optional time zone. (See <xref
      linkend="datatype-datetime-time-table">
      and <xref linkend="datatype-timezone-table">.)  If a time zone is
      specified in the input for <type>time without time zone</type>,
      it is silently ignored. You can also specify a date but it will
      be ignored, except when you use a time zone name that involves a
      daylight-savings rule, such as
      <literal>America/New_York</literal>. In this case specifying the date
      is required in order to determine whether standard or daylight-savings
      time applies.  The appropriate time zone offset is recorded in the
      <type>time with time zone</type> value.
     </para>

      <table id="datatype-datetime-time-table">
       <title>Time Input</title>
       <tgroup cols="2">
        <thead>
         <row>
          <entry>Example</entry>
          <entry>Description</entry>
         </row>
        </thead>
        <tbody>
         <row>
          <entry><literal>04:05:06.789</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05:06</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>040506</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05 AM</literal></entry>
          <entry>same as 04:05; AM does not affect value</entry>
         </row>
         <row>
          <entry><literal>04:05 PM</literal></entry>
          <entry>same as 16:05; input hour must be &lt;= 12</entry>
         </row>
         <row>
          <entry><literal>04:05:06.789-8</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05:06-08:00</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05-08:00</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>040506-08</literal></entry>
          <entry>ISO 8601</entry>
         </row>
         <row>
          <entry><literal>04:05:06 PST</literal></entry>
          <entry>time zone specified by abbreviation</entry>
         </row>
         <row>
          <entry><literal>2003-04-12 04:05:06 America/New_York</literal></entry>
          <entry>time zone specified by full name</entry>
         </row>
        </tbody>
       </tgroup>
      </table>

      <table tocentry="1" id="datatype-timezone-table">
       <title>Time Zone Input</title>
       <tgroup cols="2">
        <thead>
         <row>
          <entry>Example</entry>
          <entry>Description</entry>
         </row>
        </thead>
        <tbody>
         <row>
          <entry><literal>PST</literal></entry>
          <entry>Abbreviation (for Pacific Standard Time)</entry>
         </row>
         <row>
          <entry><literal>America/New_York</literal></entry>
          <entry>Full time zone name</entry>
         </row>
         <row>
          <entry><literal>PST8PDT</literal></entry>
          <entry>POSIX-style time zone specification</entry>
         </row>
         <row>
          <entry><literal>-8:00</literal></entry>
          <entry>ISO-8601 offset for PST</entry>
         </row>
         <row>
          <entry><literal>-800</literal></entry>
          <entry>ISO-8601 offset for PST</entry>
         </row>
         <row>
          <entry><literal>-8</literal></entry>
          <entry>ISO-8601 offset for PST</entry>
         </row>
         <row>
          <entry><literal>zulu</literal></entry>
          <entry>Military abbreviation for UTC</entry>
         </row>
         <row>
          <entry><literal>z</literal></entry>
          <entry>Short form of <literal>zulu</literal></entry>
         </row>
        </tbody>
       </tgroup>
      </table>

     <para>
     Refer to <xref linkend="datatype-timezones"> for more information on how
     to specify time zones.
    </para>
    </sect3>

    <sect3>
    <title>Time Stamps</title>

    <indexterm>
     <primary>timestamp</primary>
    </indexterm>

    <indexterm>
     <primary>timestamp with time zone</primary>
    </indexterm>

    <indexterm>
     <primary>timestamp without time zone</primary>
    </indexterm>

     <para>
      Valid input for the time stamp types consists of the concatenation
      of a date and a time, followed by an optional time zone,
      followed by an optional <literal>AD</literal> or <literal>BC</literal>.
      (Alternatively, <literal>AD</literal>/<literal>BC</literal> can appear
      before the time zone, but this is not the preferred ordering.)
      Thus:

<programlisting>
1999-01-08 04:05:06
</programlisting>
      and:
<programlisting>
1999-01-08 04:05:06 -8:00
</programlisting>

      are valid values, which follow the <acronym>ISO</acronym> 8601
      standard.  In addition, the common format:
<programlisting>
January 8 04:05:06 1999 PST
</programlisting>
      is supported.
     </para>

     <para>
      The <acronym>SQL</acronym> standard differentiates
      <type>timestamp without time zone</type>
      and <type>timestamp with time zone</type> literals by the presence of a
      <quote>+</quote> or <quote>-</quote> symbol and time zone offset after
      the time.  Hence, according to the standard,

      <programlisting>TIMESTAMP '2004-10-19 10:23:54'</programlisting>

      is a <type>timestamp without time zone</type>, while

      <programlisting>TIMESTAMP '2004-10-19 10:23:54+02'</programlisting>

      is a <type>timestamp with time zone</type>.
      <productname>PostgreSQL</productname> never examines the content of a
      literal string before determining its type, and therefore will treat
      both of the above as <type>timestamp without time zone</type>.  To
      ensure that a literal is treated as <type>timestamp with time
      zone</type>, give it the correct explicit type:

      <programlisting>TIMESTAMP WITH TIME ZONE '2004-10-19 10:23:54+02'</programlisting>

      In a literal that has been determined to be <type>timestamp without time
      zone</type>, <productname>PostgreSQL</productname> will silently ignore
      any time zone indication.
      That is, the resulting value is derived from the date/time
      fields in the input value, and is not adjusted for time zone.
     </para>

     <para>
      For <type>timestamp with time zone</type>, the internally stored
      value is always in UTC (Universal
      Coordinated Time, traditionally known as Greenwich Mean Time,
      <acronym>GMT</>).  An input value that has an explicit
      time zone specified is converted to UTC using the appropriate offset
      for that time zone.  If no time zone is stated in the input string,
      then it is assumed to be in the time zone indicated by the system's
      <xref linkend="guc-timezone"> parameter, and is converted to UTC using the
      offset for the <varname>timezone</> zone.
     </para>

     <para>
      When a <type>timestamp with time
      zone</type> value is output, it is always converted from UTC to the
      current <varname>timezone</> zone, and displayed as local time in that
      zone.  To see the time in another time zone, either change
      <varname>timezone</> or use the <literal>AT TIME ZONE</> construct
      (see <xref linkend="functions-datetime-zoneconvert">).
     </para>

     <para>
      Conversions between <type>timestamp without time zone</type> and
      <type>timestamp with time zone</type> normally assume that the
      <type>timestamp without time zone</type> value should be taken or given
      as <varname>timezone</> local time.  A different time zone can
      be specified for the conversion using <literal>AT TIME ZONE</>.
     </para>
    </sect3>

    <sect3>
     <title>Special Values</title>

     <indexterm>
      <primary>time</primary>
      <secondary>constants</secondary>
     </indexterm>

     <indexterm>
      <primary>date</primary>
      <secondary>constants</secondary>
     </indexterm>

     <para>
      <productname>PostgreSQL</productname> supports several
      special date/time input values for convenience, as shown in <xref
      linkend="datatype-datetime-special-table">.  The values
      <literal>infinity</literal> and <literal>-infinity</literal>
      are specially represented inside the system and will be displayed
      unchanged; but the others are simply notational shorthands
      that will be converted to ordinary date/time values when read.
      (In particular, <literal>now</> and related strings are converted
      to a specific time value as soon as they are read.)
      All of these values need to be enclosed in single quotes when used
      as constants in SQL commands.
     </para>

      <table id="datatype-datetime-special-table">
       <title>Special Date/Time Inputs</title>
       <tgroup cols="3">
        <thead>
         <row>
          <entry>Input String</entry>
          <entry>Valid Types</entry>
          <entry>Description</entry>
         </row>
        </thead>
        <tbody>
         <row>
          <entry><literal>epoch</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>1970-01-01 00:00:00+00 (Unix system time zero)</entry>
         </row>
         <row>
          <entry><literal>infinity</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>later than all other time stamps</entry>
         </row>
         <row>
          <entry><literal>-infinity</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>earlier than all other time stamps</entry>
         </row>
         <row>
          <entry><literal>now</literal></entry>
          <entry><type>date</type>, <type>time</type>, <type>timestamp</type></entry>
          <entry>current transaction's start time</entry>
         </row>
         <row>
          <entry><literal>today</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>midnight today</entry>
         </row>
         <row>
          <entry><literal>tomorrow</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>midnight tomorrow</entry>
         </row>
         <row>
          <entry><literal>yesterday</literal></entry>
          <entry><type>date</type>, <type>timestamp</type></entry>
          <entry>midnight yesterday</entry>
         </row>
         <row>
          <entry><literal>allballs</literal></entry>
          <entry><type>time</type></entry>
          <entry>00:00:00.00 UTC</entry>
         </row>
        </tbody>
       </tgroup>
      </table>

     <para>
      The following <acronym>SQL</acronym>-compatible functions can also
      be used to obtain the current time value for the corresponding data
      type:
      <literal>CURRENT_DATE</literal>, <literal>CURRENT_TIME</literal>,
      <literal>CURRENT_TIMESTAMP</literal>, <literal>LOCALTIME</literal>,
      <literal>LOCALTIMESTAMP</literal>.  The latter four accept an
      optional subsecond precision specification.  (See <xref
      linkend="functions-datetime-current">.)  Note that these are
      SQL functions and are <emphasis>not</> recognized in data input strings.
     </para>

    </sect3>
   </sect2>

   <sect2 id="datatype-datetime-output">
    <title>Date/Time Output</title>

    <indexterm>
     <primary>date</primary>
     <secondary>output format</secondary>
     <seealso>formatting</seealso>
    </indexterm>

    <indexterm>
     <primary>time</primary>
     <secondary>output format</secondary>
     <seealso>formatting</seealso>
    </indexterm>

    <para>
     The output format of the date/time types can be set to one of the four
     styles ISO 8601,
     <acronym>SQL</acronym> (Ingres), traditional <productname>POSTGRES</>
     (Unix <application>date</> format), or
     German.  The default
     is the <acronym>ISO</acronym> format.  (The
     <acronym>SQL</acronym> standard requires the use of the ISO 8601
     format.  The name of the <quote>SQL</quote> output format is a
     historical accident.)  <xref
     linkend="datatype-datetime-output-table"> shows examples of each
     output style.  The output of the <type>date</type> and
     <type>time</type> types is generally only the date or time part
     in accordance with the given examples.  However, the
     <productname>POSTGRES</> style outputs date-only values in
     <acronym>ISO</acronym> format.
    </para>

     <table id="datatype-datetime-output-table">
      <title>Date/Time Output Styles</title>
      <tgroup cols="3">
       <thead>
        <row>
         <entry>Style Specification</entry>
         <entry>Description</entry>
         <entry>Example</entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry><literal>ISO</literal></entry>
         <entry>ISO 8601, SQL standard</entry>
         <entry><literal>1997-12-17 07:37:16-08</literal></entry>
        </row>
        <row>
         <entry><literal>SQL</literal></entry>
         <entry>traditional style</entry>
         <entry><literal>12/17/1997 07:37:16.00 PST</literal></entry>
        </row>
        <row>
         <entry><literal>Postgres</literal></entry>
         <entry>original style</entry>
         <entry><literal>Wed Dec 17 07:37:16 1997 PST</literal></entry>
        </row>
        <row>
         <entry><literal>German</literal></entry>
         <entry>regional style</entry>
         <entry><literal>17.12.1997 07:37:16.00 PST</literal></entry>
        </row>
       </tbody>
      </tgroup>
     </table>

    <note>
     <para>
      ISO 8601 specifies the use of uppercase letter <literal>T</> to separate
      the date and time.  <productname>PostgreSQL</> accepts that format on
      input, but on output it uses a space rather than <literal>T</>, as shown
      above.  This is for readability and for consistency with RFC 3339 as
      well as some other database systems.
     </para>
    </note>

    <para>
     In the <acronym>SQL</acronym> and POSTGRES styles, day appears before
     month if DMY field ordering has been specified, otherwise month appears
     before day.
     (See <xref linkend="datatype-datetime-input">
     for how this setting also affects interpretation of input values.)
     <xref linkend="datatype-datetime-output2-table"> shows examples.
    </para>

     <table id="datatype-datetime-output2-table">
      <title>Date Order Conventions</title>
      <tgroup cols="3">
       <thead>
        <row>
         <entry><varname>datestyle</varname> Setting</entry>
         <entry>Input Ordering</entry>
         <entry>Example Output</entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry><literal>SQL, DMY</></entry>
         <entry><replaceable>day</replaceable>/<replaceable>month</replaceable>/<replaceable>year</replaceable></entry>
         <entry><literal>17/12/1997 15:37:16.00 CET</literal></entry>
        </row>
        <row>
         <entry><literal>SQL, MDY</></entry>
         <entry><replaceable>month</replaceable>/<replaceable>day</replaceable>/<replaceable>year</replaceable></entry>
         <entry><literal>12/17/1997 07:37:16.00 PST</literal></entry>
        </row>
        <row>
         <entry><literal>Postgres, DMY</></entry>
         <entry><replaceable>day</replaceable>/<replaceable>month</replaceable>/<replaceable>year</replaceable></entry>
         <entry><literal>Wed 17 Dec 07:37:16 1997 PST</literal></entry>
        </row>
       </tbody>
      </tgroup>
     </table>

    <para>
     The date/time style can be selected by the user using the
     <command>SET datestyle</command> command, the <xref
     linkend="guc-datestyle"> parameter in the
     <filename>postgresql.conf</filename> configuration file, or the
     <envar>PGDATESTYLE</envar> environment variable on the server or
     client.
    </para>

    <para>
     The formatting function <function>to_char</function>
     (see <xref linkend="functions-formatting">) is also available as
     a more flexible way to format date/time output.
    </para>
   </sect2>

   <sect2 id="datatype-timezones">
    <title>Time Zones</title>

    <indexterm zone="datatype-timezones">
     <primary>time zone</primary>
    </indexterm>

   <para>
    Time zones, and time-zone conventions, are influenced by
    political decisions, not just earth geometry. Time zones around the
    world became somewhat standardized during the 1900s,
    but continue to be prone to arbitrary changes, particularly with
    respect to daylight-savings rules.
    <productname>PostgreSQL</productname> uses the widely-used
    IANA (Olson) time zone database for information about
    historical time zone rules.  For times in the future, the assumption
    is that the latest known rules for a given time zone will
    continue to be observed indefinitely far into the future.
   </para>

    <para>
     <productname>PostgreSQL</productname> endeavors to be compatible with
     the <acronym>SQL</acronym> standard definitions for typical usage.
     However, the <acronym>SQL</acronym> standard has an odd mix of date and
     time types and capabilities. Two obvious problems are:

     <itemizedlist>
      <listitem>
       <para>
        Although the <type>date</type> type
        cannot have an associated time zone, the
        <type>time</type> type can.
        Time zones in the real world have little meaning unless
        associated with a date as well as a time,
        since the offset can vary through the year with daylight-saving
        time boundaries.
       </para>
      </listitem>

      <listitem>
       <para>
        The default time zone is specified as a constant numeric offset
        from <acronym>UTC</>. It is therefore impossible to adapt to
        daylight-saving time when doing date/time arithmetic across
        <acronym>DST</acronym> boundaries.
       </para>
      </listitem>

     </itemizedlist>
    </para>

    <para>
     To address these difficulties, we recommend using date/time types
     that contain both date and time when using time zones. We
     do <emphasis>not</> recommend using the type <type>time with
     time zone</type> (though it is supported by
     <productname>PostgreSQL</productname> for legacy applications and
     for compliance with the <acronym>SQL</acronym> standard).
     <productname>PostgreSQL</productname> assumes
     your local time zone for any type containing only date or time.
    </para>

    <para>
     All timezone-aware dates and times are stored internally in
     <acronym>UTC</acronym>.  They are converted to local time
     in the zone specified by the <xref linkend="guc-timezone"> configuration
     parameter before being displayed to the client.
    </para>

    <para>
     <productname>PostgreSQL</productname> allows you to specify time zones in
     three different forms:
     <itemizedlist>
      <listitem>
       <para>
        A full time zone name, for example <literal>America/New_York</>.
        The recognized time zone names are listed in the
        <literal>pg_timezone_names</literal> view (see <xref
        linkend="view-pg-timezone-names">).
        <productname>PostgreSQL</productname> uses the widely-used IANA
        time zone data for this purpose, so the same time zone
        names are also recognized by much other software.
       </para>
      </listitem>
      <listitem>
       <para>
        A time zone abbreviation, for example <literal>PST</>.  Such a
        specification merely defines a particular offset from UTC, in
        contrast to full time zone names which can imply a set of daylight
        savings transition-date rules as well.  The recognized abbreviations
        are listed in the <literal>pg_timezone_abbrevs</> view (see <xref
        linkend="view-pg-timezone-abbrevs">).  You cannot set the
        configuration parameters <xref linkend="guc-timezone"> or
        <xref linkend="guc-log-timezone"> to a time
        zone abbreviation, but you can use abbreviations in
        date/time input values and with the <literal>AT TIME ZONE</>
        operator.
       </para>
      </listitem>
      <listitem>
       <para>
        In addition to the timezone names and abbreviations,
        <productname>PostgreSQL</productname> will accept POSIX-style time zone
        specifications of the form <replaceable>STD</><replaceable>offset</> or
        <replaceable>STD</><replaceable>offset</><replaceable>DST</>, where
        <replaceable>STD</> is a zone abbreviation, <replaceable>offset</> is a
        numeric offset in hours west from UTC, and <replaceable>DST</> is an
        optional daylight-savings zone abbreviation, assumed to stand for one
        hour ahead of the given offset. For example, if <literal>EST5EDT</>
        were not already a recognized zone name, it would be accepted and would
        be functionally equivalent to United States East Coast time.  In this
        syntax, a zone abbreviation can be a string of letters, or an
        arbitrary string surrounded by angle brackets (<literal>&lt;&gt;</>).
        When a daylight-savings zone abbreviation is present,
        it is assumed to be used
        according to the same daylight-savings transition rules used in the
        IANA time zone database's <filename>posixrules</> entry.
        In a standard <productname>PostgreSQL</productname> installation,
        <filename>posixrules</> is the same as <literal>US/Eastern</>, so
        that POSIX-style time zone specifications follow USA daylight-savings
        rules.  If needed, you can adjust this behavior by replacing the
        <filename>posixrules</> file.
       </para>
      </listitem>
     </itemizedlist>

     In short, this is the difference between abbreviations
     and full names: abbreviations represent a specific offset from UTC,
     whereas many of the full names imply a local daylight-savings time
     rule, and so have two possible UTC offsets.  As an example,
     <literal>2014-06-04 12:00 America/New_York</> represents noon local
     time in New York, which for this particular date was Eastern Daylight
     Time (UTC-4).  So <literal>2014-06-04 12:00 EDT</> specifies that
     same time instant.  But <literal>2014-06-04 12:00 EST</> specifies
     noon Eastern Standard Time (UTC-5), regardless of whether daylight
     savings was nominally in effect on that date.
    </para>

    <para>
     To complicate matters, some jurisdictions have used the same timezone
     abbreviation to mean different UTC offsets at different times; for
     example, in Moscow <literal>MSK</> has meant UTC+3 in some years and
     UTC+4 in others.  <application>PostgreSQL</> interprets such
     abbreviations according to whatever they meant (or had most recently
     meant) on the specified date; but, as with the <literal>EST</> example
     above, this is not necessarily the same as local civil time on that date.
    </para>

    <para>
     One should be wary that the POSIX-style time zone feature can
     lead to silently accepting bogus input, since there is no check on the
     reasonableness of the zone abbreviations.  For example, <literal>SET
     TIMEZONE TO FOOBAR0</> will work, leaving the system effectively using
     a rather peculiar abbreviation for UTC.
     Another issue to keep in mind is that in POSIX time zone names,
     positive offsets are used for locations <emphasis>west</> of Greenwich.
     Everywhere else, <productname>PostgreSQL</productname> follows the
     ISO-8601 convention that positive timezone offsets are <emphasis>east</>
     of Greenwich.
    </para>

    <para>
     In all cases, timezone names and abbreviations are recognized
     case-insensitively.  (This is a change from <productname>PostgreSQL</>
     versions prior to 8.2, which were case-sensitive in some contexts but
     not others.)
    </para>

    <para>
     Neither timezone names nor abbreviations are hard-wired into the server;
     they are obtained from configuration files stored under
     <filename>.../share/timezone/</> and <filename>.../share/timezonesets/</>
     of the installation directory
     (see <xref linkend="datetime-config-files">).
    </para>

    <para>
     The <xref linkend="guc-timezone"> configuration parameter can
     be set in the file <filename>postgresql.conf</>, or in any of the
     other standard ways described in <xref linkend="runtime-config">.
     There are also some special ways to set it:

     <itemizedlist>
      <listitem>
       <para>
        The <acronym>SQL</acronym> command <command>SET TIME ZONE</command>
        sets the time zone for the session.  This is an alternative spelling
        of <command>SET TIMEZONE TO</> with a more SQL-spec-compatible syntax.
       </para>
      </listitem>

      <listitem>
       <para>
        The <envar>PGTZ</envar> environment variable is used by
        <application>libpq</application> clients
        to send a <command>SET TIME ZONE</command>
        command to the server upon connection.
       </para>
      </listitem>
     </itemizedlist>
    </para>
   </sect2>

   <sect2 id="datatype-interval-input">
    <title>Interval Input</title>

    <indexterm>
     <primary>interval</primary>
    </indexterm>

     <para>
      <type>interval</type> values can be written using the following
      verbose syntax:

<synopsis>
<optional>@</> <replaceable>quantity</> <replaceable>unit</> <optional><replaceable>quantity</> <replaceable>unit</>...</> <optional><replaceable>direction</></optional>
</synopsis>

     where <replaceable>quantity</> is a number (possibly signed);
     <replaceable>unit</> is <literal>microsecond</literal>,
     <literal>millisecond</literal>, <literal>second</literal>,
     <literal>minute</literal>, <literal>hour</literal>, <literal>day</literal>,
     <literal>week</literal>, <literal>month</literal>, <literal>year</literal>,
     <literal>decade</literal>, <literal>century</literal>, <literal>millennium</literal>,
     or abbreviations or plurals of these units;
     <replaceable>direction</> can be <literal>ago</literal> or
     empty.  The at sign (<literal>@</>) is optional noise.  The amounts
     of the different units are implicitly added with appropriate
     sign accounting.  <literal>ago</literal> negates all the fields.
     This syntax is also used for interval output, if
     <xref linkend="guc-intervalstyle"> is set to
     <literal>postgres_verbose</>.
    </para>

    <para>
     Quantities of days, hours, minutes, and seconds can be specified without
     explicit unit markings.  For example, <literal>'1 12:59:10'</> is read
     the same as <literal>'1 day 12 hours 59 min 10 sec'</>.  Also,
     a combination of years and months can be specified with a dash;
     for example <literal>'200-10'</> is read the same as <literal>'200 years
     10 months'</>.  (These shorter forms are in fact the only ones allowed
     by the <acronym>SQL</acronym> standard, and are used for output when
     <varname>IntervalStyle</> is set to <literal>sql_standard</literal>.)
    </para>

    <para>
     Interval values can also be written as ISO 8601 time intervals, using
     either the <quote>format with designators</> of the standard's section
     4.4.3.2 or the <quote>alternative format</> of section 4.4.3.3.  The
     format with designators looks like this:
<synopsis>
P <replaceable>quantity</> <replaceable>unit</> <optional> <replaceable>quantity</> <replaceable>unit</> ...</optional> <optional> T <optional> <replaceable>quantity</> <replaceable>unit</> ...</optional></optional>
</synopsis>
      The string must start with a <literal>P</>, and may include a
      <literal>T</> that introduces the time-of-day units.  The
      available unit abbreviations are given in <xref
      linkend="datatype-interval-iso8601-units">.  Units may be
      omitted, and may be specified in any order, but units smaller than
      a day must appear after <literal>T</>.  In particular, the meaning of
      <literal>M</> depends on whether it is before or after
      <literal>T</>.
     </para>

     <table id="datatype-interval-iso8601-units">
      <title>ISO 8601 Interval Unit Abbreviations</title>
     <tgroup cols="2">
       <thead>
        <row>
         <entry>Abbreviation</entry>
         <entry>Meaning</entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry>Y</entry>
         <entry>Years</entry>
        </row>
        <row>
         <entry>M</entry>
         <entry>Months (in the date part)</entry>
        </row>
        <row>
         <entry>W</entry>
         <entry>Weeks</entry>
        </row>
        <row>
         <entry>D</entry>
         <entry>Days</entry>
        </row>
        <row>
         <entry>H</entry>
         <entry>Hours</entry>
        </row>
        <row>
         <entry>M</entry>
         <entry>Minutes (in the time part)</entry>
        </row>
        <row>
         <entry>S</entry>
         <entry>Seconds</entry>
        </row>
       </tbody>
      </tgroup>
     </table>

     <para>
      In the alternative format:
<synopsis>
P <optional> <replaceable>years</>-<replaceable>months</>-<replaceable>days</> </optional> <optional> T <replaceable>hours</>:<replaceable>minutes</>:<replaceable>seconds</> </optional>
</synopsis>
      the string must begin with <literal>P</literal>, and a
      <literal>T</> separates the date and time parts of the interval.
      The values are given as numbers similar to ISO 8601 dates.
    </para>

    <para>
     When writing an interval constant with a <replaceable>fields</>
     specification, or when assigning a string to an interval column that was
     defined with a <replaceable>fields</> specification, the interpretation of
     unmarked quantities depends on the <replaceable>fields</>.  For
     example <literal>INTERVAL '1' YEAR</> is read as 1 year, whereas
     <literal>INTERVAL '1'</> means 1 second.  Also, field values
     <quote>to the right</> of the least significant field allowed by the
     <replaceable>fields</> specification are silently discarded.  For
     example, writing <literal>INTERVAL '1 day 2:03:04' HOUR TO MINUTE</>
     results in dropping the seconds field, but not the day field.
    </para>

    <para>
     According to the <acronym>SQL</> standard all fields of an interval
     value must have the same sign, so a leading negative sign applies to all
     fields; for example the negative sign in the interval literal
     <literal>'-1 2:03:04'</> applies to both the days and hour/minute/second
     parts.  <productname>PostgreSQL</> allows the fields to have different
     signs, and traditionally treats each field in the textual representation
     as independently signed, so that the hour/minute/second part is
     considered positive in this example.  If <varname>IntervalStyle</> is
     set to <literal>sql_standard</literal> then a leading sign is considered
     to apply to all fields (but only if no additional signs appear).
     Otherwise the traditional <productname>PostgreSQL</> interpretation is
     used.  To avoid ambiguity, it's recommended to attach an explicit sign
     to each field if any field is negative.
    </para>

    <para>
     Internally <type>interval</> values are stored as months, days,
     and seconds. This is done because the number of days in a month
     varies, and a day can have 23 or 25 hours if a daylight savings
     time adjustment is involved.  The months and days fields are integers
     while the seconds field can store fractions.  Because intervals are
     usually created from constant strings or <type>timestamp</> subtraction,
     this storage method works well in most cases. Functions
     <function>justify_days</> and <function>justify_hours</> are
     available for adjusting days and hours that overflow their normal
     ranges.
    </para>

    <para>
     In the verbose input format, and in some fields of the more compact
     input formats, field values can have fractional parts; for example
     <literal>'1.5 week'</> or <literal>'01:02:03.45'</>.  Such input is
     converted to the appropriate number of months, days, and seconds
     for storage.  When this would result in a fractional number of
     months or days, the fraction is added to the lower-order fields
     using the conversion factors 1 month = 30 days and 1 day = 24 hours.
     For example, <literal>'1.5 month'</> becomes 1 month and 15 days.
     Only seconds will ever be shown as fractional on output.
    </para>

    <para>
     <xref linkend="datatype-interval-input-examples"> shows some examples
     of valid <type>interval</> input.
    </para>

     <table id="datatype-interval-input-examples">
      <title>Interval Input</title>
      <tgroup cols="2">
       <thead>
        <row>
         <entry>Example</entry>
         <entry>Description</entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry>1-2</entry>
         <entry>SQL standard format: 1 year 2 months</entry>
        </row>
        <row>
         <entry>3 4:05:06</entry>
         <entry>SQL standard format: 3 days 4 hours 5 minutes 6 seconds</entry>
        </row>
        <row>
         <entry>1 year 2 months 3 days 4 hours 5 minutes 6 seconds</entry>
         <entry>Traditional Postgres format: 1 year 2 months 3 days 4 hours 5 minutes 6 seconds</entry>
        </row>
        <row>
         <entry>P1Y2M3DT4H5M6S</entry>
         <entry>ISO 8601 <quote>format with designators</>: same meaning as above</entry>
        </row>
        <row>
         <entry>P0001-02-03T04:05:06</entry>
         <entry>ISO 8601 <quote>alternative format</>: same meaning as above</entry>
        </row>
       </tbody>
      </tgroup>
     </table>

   </sect2>

   <sect2 id="datatype-interval-output">
    <title>Interval Output</title>

    <indexterm>
     <primary>interval</primary>
     <secondary>output format</secondary>
     <seealso>formatting</seealso>
    </indexterm>

    <para>
     The output format of the interval type can be set to one of the
     four styles <literal>sql_standard</>, <literal>postgres</>,
     <literal>postgres_verbose</>, or <literal>iso_8601</>,
     using the command <literal>SET intervalstyle</literal>.
     The default is the <literal>postgres</> format.
     <xref linkend="interval-style-output-table"> shows examples of each
     output style.
    </para>

    <para>
     The <literal>sql_standard</> style produces output that conforms to
     the SQL standard's specification for interval literal strings, if
     the interval value meets the standard's restrictions (either year-month
     only or day-time only, with no mixing of positive
     and negative components).  Otherwise the output looks like a standard
     year-month literal string followed by a day-time literal string,
     with explicit signs added to disambiguate mixed-sign intervals.
    </para>

    <para>
     The output of the <literal>postgres</> style matches the output of
     <productname>PostgreSQL</> releases prior to 8.4 when the
     <xref linkend="guc-datestyle"> parameter was set to <literal>ISO</>.
    </para>

    <para>
     The output of the <literal>postgres_verbose</> style matches the output of
     <productname>PostgreSQL</> releases prior to 8.4 when the
     <varname>DateStyle</> parameter was set to non-<literal>ISO</> output.
    </para>

    <para>
     The output of the <literal>iso_8601</> style matches the <quote>format
     with designators</> described in section 4.4.3.2 of the
     ISO 8601 standard.
    </para>

     <table id="interval-style-output-table">
       <title>Interval Output Style Examples</title>
       <tgroup cols="4">
        <thead>
         <row>
          <entry>Style Specification</entry>
          <entry>Year-Month Interval</entry>
          <entry>Day-Time Interval</entry>
          <entry>Mixed Interval</entry>
         </row>
        </thead>
        <tbody>
         <row>
          <entry><literal>sql_standard</></entry>
          <entry>1-2</entry>
          <entry>3 4:05:06</entry>
          <entry>-1-2 +3 -4:05:06</entry>
         </row>
         <row>
          <entry><literal>postgres</></entry>
          <entry>1 year 2 mons</entry>
          <entry>3 days 04:05:06</entry>
          <entry>-1 year -2 mons +3 days -04:05:06</entry>
         </row>
         <row>
          <entry><literal>postgres_verbose</></entry>
          <entry>@ 1 year 2 mons</entry>
          <entry>@ 3 days 4 hours 5 mins 6 secs</entry>
          <entry>@ 1 year 2 mons -3 days 4 hours 5 mins 6 secs ago</entry>
         </row>
         <row>
          <entry><literal>iso_8601</></entry>
          <entry>P1Y2M</entry>
          <entry>P3DT4H5M6S</entry>
          <entry>P-1Y-2M3DT-4H-5M-6S</entry>
         </row>
        </tbody>
       </tgroup>
    </table>

   </sect2>

  </sect1>

  <sect1 id="datatype-boolean">
   <title>Boolean Type</title>

   <indexterm zone="datatype-boolean">
    <primary>Boolean</primary>
    <secondary>data type</secondary>
   </indexterm>

   <indexterm zone="datatype-boolean">
    <primary>true</primary>
   </indexterm>

   <indexterm zone="datatype-boolean">
    <primary>false</primary>
   </indexterm>

   <para>
    <productname>PostgreSQL</productname> provides the
    standard <acronym>SQL</acronym> type <type>boolean</type>;
    see <xref linkend="datatype-boolean-table">.
    The <type>boolean</type> type can have several states:
    <quote>true</quote>, <quote>false</quote>, and a third state,
    <quote>unknown</quote>, which is represented by the
    <acronym>SQL</acronym> null value.
   </para>

   <table id="datatype-boolean-table">
    <title>Boolean Data Type</title>
    <tgroup cols="3">
     <thead>
      <row>
       <entry>Name</entry>
       <entry>Storage Size</entry>
       <entry>Description</entry>
      </row>
     </thead>
     <tbody>
      <row>
       <entry><type>boolean</type></entry>
       <entry>1 byte</entry>
       <entry>state of true or false</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    Valid literal values for the <quote>true</quote> state are:
    <simplelist>
     <member><literal>TRUE</literal></member>
     <member><literal>'t'</literal></member>
     <member><literal>'true'</literal></member>
     <member><literal>'y'</literal></member>
     <member><literal>'yes'</literal></member>
     <member><literal>'on'</literal></member>
     <member><literal>'1'</literal></member>
    </simplelist>
    For the <quote>false</quote> state, the following values can be
    used:
    <simplelist>
     <member><literal>FALSE</literal></member>
     <member><literal>'f'</literal></member>
     <member><literal>'false'</literal></member>
     <member><literal>'n'</literal></member>
     <member><literal>'no'</literal></member>
     <member><literal>'off'</literal></member>
     <member><literal>'0'</literal></member>
    </simplelist>
    Leading or trailing whitespace is ignored, and case does not matter.
    The key words
    <literal>TRUE</literal> and <literal>FALSE</literal> are the preferred
    (<acronym>SQL</acronym>-compliant) usage.
   </para>

   <para>
    <xref linkend="datatype-boolean-example"> shows that
    <type>boolean</type> values are output using the letters
    <literal>t</literal> and <literal>f</literal>.
   </para>

   <example id="datatype-boolean-example">
    <title>Using the <type>boolean</type> Type</title>

<programlisting>
CREATE TABLE test1 (a boolean, b text);
INSERT INTO test1 VALUES (TRUE, 'sic est');
INSERT INTO test1 VALUES (FALSE, 'non est');
SELECT * FROM test1;
 a |    b
---+---------
 t | sic est
 f | non est

SELECT * FROM test1 WHERE a;
 a |    b
---+---------
 t | sic est
</programlisting>
   </example>
  </sect1>

  <sect1 id="datatype-enum">
   <title>Enumerated Types</title>

   <indexterm zone="datatype-enum">
    <primary>data type</primary>
    <secondary>enumerated (enum)</secondary>
   </indexterm>

   <indexterm zone="datatype-enum">
    <primary>enumerated types</primary>
   </indexterm>

   <para>
    Enumerated (enum) types are data types that
    comprise a static, ordered set of values.
    They are equivalent to the <type>enum</type>
    types supported in a number of programming languages. An example of an enum
    type might be the days of the week, or a set of status values for
    a piece of data.
   </para>

   <sect2>
    <title>Declaration of Enumerated Types</title>

    <para>
     Enum types are created using the <xref
     linkend="sql-createtype"> command,
     for example:

<programlisting>
CREATE TYPE mood AS ENUM ('sad', 'ok', 'happy');
</programlisting>

     Once created, the enum type can be used in table and function
     definitions much like any other type:
<programlisting>
CREATE TYPE mood AS ENUM ('sad', 'ok', 'happy');
CREATE TABLE person (
    name text,
    current_mood mood
);
INSERT INTO person VALUES ('Moe', 'happy');
SELECT * FROM person WHERE current_mood = 'happy';
 name | current_mood 
------+--------------
 Moe  | happy
(1 row)
</programlisting>
    </para>
    </sect2>

    <sect2>
     <title>Ordering</title>

     <para>
      The ordering of the values in an enum type is the
      order in which the values were listed when the type was created.
      All standard comparison operators and related
      aggregate functions are supported for enums.  For example:

<programlisting>
INSERT INTO person VALUES ('Larry', 'sad');
INSERT INTO person VALUES ('Curly', 'ok');
SELECT * FROM person WHERE current_mood > 'sad';
 name  | current_mood 
-------+--------------
 Moe   | happy
 Curly | ok
(2 rows)

SELECT * FROM person WHERE current_mood > 'sad' ORDER BY current_mood;
 name  | current_mood 
-------+--------------
 Curly | ok
 Moe   | happy
(2 rows)

SELECT name
FROM person
WHERE current_mood = (SELECT MIN(current_mood) FROM person);
 name  
-------
 Larry
(1 row)
</programlisting>
     </para>
   </sect2>

   <sect2>
    <title>Type Safety</title>

    <para>
     Each enumerated data type is separate and cannot
     be compared with other enumerated types.  See this example:

<programlisting>
CREATE TYPE happiness AS ENUM ('happy', 'very happy', 'ecstatic');
CREATE TABLE holidays (
    num_weeks integer,
    happiness happiness
);
INSERT INTO holidays(num_weeks,happiness) VALUES (4, 'happy');
INSERT INTO holidays(num_weeks,happiness) VALUES (6, 'very happy');
INSERT INTO holidays(num_weeks,happiness) VALUES (8, 'ecstatic');
INSERT INTO holidays(num_weeks,happiness) VALUES (2, 'sad');
ERROR:  invalid input value for enum happiness: "sad"
SELECT person.name, holidays.num_weeks FROM person, holidays
  WHERE person.current_mood = holidays.happiness;
ERROR:  operator does not exist: mood = happiness
</programlisting>
    </para>

    <para>
     If you really need to do something like that, you can either
     write a custom operator or add explicit casts to your query:

<programlisting>
SELECT person.name, holidays.num_weeks FROM person, holidays
  WHERE person.current_mood::text = holidays.happiness::text;
 name | num_weeks 
------+-----------
 Moe  |         4
(1 row)

</programlisting>
    </para>
   </sect2>

   <sect2>
    <title>Implementation Details</title>

    <para>
     An enum value occupies four bytes on disk.  The length of an enum
     value's textual label is limited by the <symbol>NAMEDATALEN</symbol>
     setting compiled into <productname>PostgreSQL</productname>; in standard
     builds this means at most 63 bytes.
    </para>

    <para>
     Enum labels are case sensitive, so
     <type>'happy'</type> is not the same as <type>'HAPPY'</type>.
     White space in the labels is significant too.
    </para>

    <para>
     The translations from internal enum values to textual labels are
     kept in the system catalog
     <link linkend="catalog-pg-enum"><structname>pg_enum</structname></link>.
     Querying this catalog directly can be useful.
    </para>

   </sect2>
  </sect1>

  <sect1 id="datatype-geometric">
   <title>Geometric Types</title>

   <para>
    Geometric data types represent two-dimensional spatial
    objects. <xref linkend="datatype-geo-table"> shows the geometric
    types available in <productname>PostgreSQL</productname>.
   </para>

    <table id="datatype-geo-table">
     <title>Geometric Types</title>
     <tgroup cols="4">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
        <entry>Representation</entry>
       </row>
      </thead>
      <tbody>
       <row>
        <entry><type>point</type></entry>
        <entry>16 bytes</entry>
        <entry>Point on a plane</entry>
        <entry>(x,y)</entry>
       </row>
       <row>
        <entry><type>line</type></entry>
        <entry>32 bytes</entry>
        <entry>Infinite line</entry>
        <entry>{A,B,C}</entry>
       </row>
       <row>
        <entry><type>lseg</type></entry>
        <entry>32 bytes</entry>
        <entry>Finite line segment</entry>
        <entry>((x1,y1),(x2,y2))</entry>
       </row>
       <row>
        <entry><type>box</type></entry>
        <entry>32 bytes</entry>
        <entry>Rectangular box</entry>
        <entry>((x1,y1),(x2,y2))</entry>
       </row>
       <row>
        <entry><type>path</type></entry>
        <entry>16+16n bytes</entry>
        <entry>Closed path (similar to polygon)</entry>
        <entry>((x1,y1),...)</entry>
       </row>
       <row>
        <entry><type>path</type></entry>
        <entry>16+16n bytes</entry>
        <entry>Open path</entry>
        <entry>[(x1,y1),...]</entry>
       </row>
       <row>
        <entry><type>polygon</type></entry>
        <entry>40+16n bytes</entry>
        <entry>Polygon (similar to closed path)</entry>
        <entry>((x1,y1),...)</entry>
       </row>
       <row>
        <entry><type>circle</type></entry>
        <entry>24 bytes</entry>
        <entry>Circle</entry>
        <entry>&lt;(x,y),r&gt; (center point and radius)</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <para>
    A rich set of functions and operators is available to perform various geometric
    operations such as scaling, translation, rotation, and determining
    intersections.  They are explained in <xref linkend="functions-geometry">.
   </para>

   <sect2>
    <title>Points</title>

    <indexterm>
     <primary>point</primary>
    </indexterm>

    <para>
     Points are the fundamental two-dimensional building block for geometric
     types.  Values of type <type>point</type> are specified using either of
     the following syntaxes:

<synopsis>
( <replaceable>x</replaceable> , <replaceable>y</replaceable> )
  <replaceable>x</replaceable> , <replaceable>y</replaceable>
</synopsis>

     where <replaceable>x</> and <replaceable>y</> are the respective
     coordinates, as floating-point numbers.
    </para>

    <para>
     Points are output using the first syntax.
    </para>
   </sect2>

   <sect2 id="datatype-line">
    <title>Lines</title>

    <indexterm>
     <primary>line</primary>
    </indexterm>

    <para>
     Lines are represented by the linear
     equation <replaceable>A</>x + <replaceable>B</>y + <replaceable>C</> = 0,
     where <replaceable>A</> and <replaceable>B</> are not both zero.  Values
     of type <type>line</type> are input and output in the following form:
<synopsis>
{ <replaceable>A</replaceable>, <replaceable>B</replaceable>, <replaceable>C</replaceable> }
</synopsis>

     Alternatively, any of the following forms can be used for input:

<synopsis>
[ ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) ]
( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )
    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   ,   <replaceable>x2</replaceable> , <replaceable>y2</replaceable>
</synopsis>

     where
     <literal>(<replaceable>x1</replaceable>,<replaceable>y1</replaceable>)</literal>
     and
     <literal>(<replaceable>x2</replaceable>,<replaceable>y2</replaceable>)</literal>
     are two different points on the line.
    </para>
   </sect2>

   <sect2 id="datatype-lseg">
    <title>Line Segments</title>

    <indexterm>
     <primary>lseg</primary>
    </indexterm>

    <indexterm>
     <primary>line segment</primary>
    </indexterm>

    <para>
     Line segments are represented by pairs of points that are the endpoints
     of the segment.  Values of type <type>lseg</type> are specified using any
     of the following syntaxes:

<synopsis>
[ ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) ]
( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )
    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   ,   <replaceable>x2</replaceable> , <replaceable>y2</replaceable>
</synopsis>

     where
     <literal>(<replaceable>x1</replaceable>,<replaceable>y1</replaceable>)</literal>
     and
     <literal>(<replaceable>x2</replaceable>,<replaceable>y2</replaceable>)</literal>
     are the end points of the line segment.
    </para>

    <para>
     Line segments are output using the first syntax.
    </para>
   </sect2>

   <sect2>
    <title>Boxes</title>

    <indexterm>
     <primary>box (data type)</primary>
    </indexterm>

    <indexterm>
     <primary>rectangle</primary>
    </indexterm>

    <para>
     Boxes are represented by pairs of points that are opposite
     corners of the box.
     Values of type <type>box</type> are specified using any of the following
     syntaxes:

<synopsis>
( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )
    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   ,   <replaceable>x2</replaceable> , <replaceable>y2</replaceable>
</synopsis>

     where
     <literal>(<replaceable>x1</replaceable>,<replaceable>y1</replaceable>)</literal>
     and
     <literal>(<replaceable>x2</replaceable>,<replaceable>y2</replaceable>)</literal>
     are any two opposite corners of the box.
    </para>

    <para>
     Boxes are output using the second syntax.
    </para>

    <para>
     Any two opposite corners can be supplied on input, but the values
     will be reordered as needed to store the
     upper right and lower left corners, in that order.
    </para>
   </sect2>

   <sect2>
    <title>Paths</title>

    <indexterm>
     <primary>path (data type)</primary>
    </indexterm>

    <para>
     Paths are represented by lists of connected points. Paths can be
     <firstterm>open</firstterm>, where
     the first and last points in the list are considered not connected, or
     <firstterm>closed</firstterm>,
     where the first and last points are considered connected.
    </para>

    <para>
     Values of type <type>path</type> are specified using any of the following
     syntaxes:

<synopsis>
[ ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) ]
( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable>
</synopsis>

     where the points are the end points of the line segments
     comprising the path.  Square brackets (<literal>[]</>) indicate
     an open path, while parentheses (<literal>()</>) indicate a
     closed path.  When the outermost parentheses are omitted, as
     in the third through fifth syntaxes, a closed path is assumed.
    </para>

    <para>
     Paths are output using the first or second syntax, as appropriate.
    </para>
   </sect2>

   <sect2 id="datatype-polygon">
    <title>Polygons</title>

    <indexterm>
     <primary>polygon</primary>
    </indexterm>

    <para>
     Polygons are represented by lists of points (the vertexes of the
     polygon). Polygons are very similar to closed paths, but are
     stored differently and have their own set of support routines.
    </para>

    <para>
     Values of type <type>polygon</type> are specified using any of the
     following syntaxes:

<synopsis>
( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable>
</synopsis>

     where the points are the end points of the line segments
     comprising the boundary of the polygon.
    </para>

    <para>
     Polygons are output using the first syntax.
    </para>
   </sect2>

   <sect2 id="datatype-circle">
    <title>Circles</title>

    <indexterm>
     <primary>circle</primary>
    </indexterm>

    <para>
     Circles are represented by a center point and radius.
     Values of type <type>circle</type> are specified using any of the
     following syntaxes:

<synopsis>
&lt; ( <replaceable>x</replaceable> , <replaceable>y</replaceable> ) , <replaceable>r</replaceable> &gt;
( ( <replaceable>x</replaceable> , <replaceable>y</replaceable> ) , <replaceable>r</replaceable> )
  ( <replaceable>x</replaceable> , <replaceable>y</replaceable> ) , <replaceable>r</replaceable>
    <replaceable>x</replaceable> , <replaceable>y</replaceable>   , <replaceable>r</replaceable>
</synopsis>

     where
     <literal>(<replaceable>x</replaceable>,<replaceable>y</replaceable>)</>
     is the center point and <replaceable>r</replaceable> is the radius of the
     circle.
    </para>

    <para>
     Circles are output using the first syntax.
    </para>
   </sect2>

  </sect1>

  <sect1 id="datatype-net-types">
   <title>Network Address Types</title>

   <indexterm zone="datatype-net-types">
    <primary>network</primary>
    <secondary>data types</secondary>
   </indexterm>

   <para>
    <productname>PostgreSQL</> offers data types to store IPv4, IPv6, and MAC
    addresses, as shown in <xref linkend="datatype-net-types-table">.  It
    is better to use these types instead of plain text types to store
    network addresses, because
    these types offer input error checking and specialized
    operators and functions (see <xref linkend="functions-net">).
   </para>

    <table tocentry="1" id="datatype-net-types-table">
     <title>Network Address Types</title>
     <tgroup cols="3">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Storage Size</entry>
        <entry>Description</entry>
       </row>
      </thead>
      <tbody>

       <row>
        <entry><type>cidr</type></entry>
        <entry>7 or 19 bytes</entry>
        <entry>IPv4 and IPv6 networks</entry>
       </row>

       <row>
        <entry><type>inet</type></entry>
        <entry>7 or 19 bytes</entry>
        <entry>IPv4 and IPv6 hosts and networks</entry>
       </row>

       <row>
        <entry><type>macaddr</type></entry>
        <entry>6 bytes</entry>
        <entry>MAC addresses</entry>
       </row>

      </tbody>
     </tgroup>
    </table>

   <para>
    When sorting <type>inet</type> or <type>cidr</type> data types,
    IPv4 addresses will always sort before IPv6 addresses, including
    IPv4 addresses encapsulated or mapped to IPv6 addresses, such as
    ::10.2.3.4 or ::ffff:10.4.3.2.
   </para>


   <sect2 id="datatype-inet">
    <title><type>inet</type></title>

    <indexterm>
     <primary>inet (data type)</primary>
    </indexterm>

    <para>
     The <type>inet</type> type holds an IPv4 or IPv6 host address, and
     optionally its subnet, all in one field.
     The subnet is represented by the number of network address bits
     present in the host address (the
     <quote>netmask</quote>).  If the netmask is 32 and the address is IPv4,
     then the value does not indicate a subnet, only a single host.
     In IPv6, the address length is 128 bits, so 128 bits specify a
     unique host address.  Note that if you
     want to accept only networks, you should use the
     <type>cidr</type> type rather than <type>inet</type>.
    </para>

    <para>
      The input format for this type is
      <replaceable class="parameter">address/y</replaceable>
      where
      <replaceable class="parameter">address</replaceable>
      is an IPv4 or IPv6 address and
      <replaceable class="parameter">y</replaceable>
      is the number of bits in the netmask.  If the
      <replaceable class="parameter">/y</replaceable>
      portion is missing, the
      netmask is 32 for IPv4 and 128 for IPv6, so the value represents
      just a single host.  On display, the
      <replaceable class="parameter">/y</replaceable>
      portion is suppressed if the netmask specifies a single host.
    </para>
   </sect2>

   <sect2 id="datatype-cidr">
    <title><type>cidr</></title>

    <indexterm>
     <primary>cidr</primary>
    </indexterm>

    <para>
     The <type>cidr</type> type holds an IPv4 or IPv6 network specification.
     Input and output formats follow Classless Internet Domain Routing
     conventions.
     The format for specifying networks is <replaceable
     class="parameter">address/y</> where <replaceable
     class="parameter">address</> is the network represented as an
     IPv4 or IPv6 address, and <replaceable
     class="parameter">y</> is the number of bits in the netmask.  If
     <replaceable class="parameter">y</> is omitted, it is calculated
     using assumptions from the older classful network numbering system, except
     it will be at least large enough to include all of the octets
     written in the input.  It is an error to specify a network address
     that has bits set to the right of the specified netmask.
    </para>

    <para>
     <xref linkend="datatype-net-cidr-table"> shows some examples.
    </para>

     <table id="datatype-net-cidr-table">
      <title><type>cidr</> Type Input Examples</title>
      <tgroup cols="3">
       <thead>
        <row>
         <entry><type>cidr</type> Input</entry>
         <entry><type>cidr</type> Output</entry>
         <entry><literal><function>abbrev(<type>cidr</type>)</function></literal></entry>
        </row>
       </thead>
       <tbody>
        <row>
         <entry>192.168.100.128/25</entry>
         <entry>192.168.100.128/25</entry>
         <entry>192.168.100.128/25</entry>
        </row>
        <row>
         <entry>192.168/24</entry>
         <entry>192.168.0.0/24</entry>
         <entry>192.168.0/24</entry>
        </row>
        <row>
         <entry>192.168/25</entry>
         <entry>192.168.0.0/25</entry>
         <entry>192.168.0.0/25</entry>
        </row>
        <row>
         <entry>192.168.1</entry>
         <entry>192.168.1.0/24</entry>
         <entry>192.168.1/24</entry>
        </row>
        <row>
         <entry>192.168</entry>
         <entry>192.168.0.0/24</entry>
         <entry>192.168.0/24</entry>
        </row>
        <row>
         <entry>128.1</entry>
         <entry>128.1.0.0/16</entry>
         <entry>128.1/16</entry>
        </row>
        <row>
         <entry>128</entry>
         <entry>128.0.0.0/16</entry>
         <entry>128.0/16</entry>
        </row>
        <row>
         <entry>128.1.2</entry>
         <entry>128.1.2.0/24</entry>
         <entry>128.1.2/24</entry>
        </row>
        <row>
         <entry>10.1.2</entry>
         <entry>10.1.2.0/24</entry>
         <entry>10.1.2/24</entry>
        </row>
        <row>
         <entry>10.1</entry>
         <entry>10.1.0.0/16</entry>
         <entry>10.1/16</entry>
        </row>
        <row>
         <entry>10</entry>
         <entry>10.0.0.0/8</entry>
         <entry>10/8</entry>
        </row>
        <row>
         <entry>10.1.2.3/32</entry>
         <entry>10.1.2.3/32</entry>
         <entry>10.1.2.3/32</entry>
        </row>
        <row>
         <entry>2001:4f8:3:ba::/64</entry>
         <entry>2001:4f8:3:ba::/64</entry>
         <entry>2001:4f8:3:ba::/64</entry>
        </row>
        <row>
         <entry>2001:4f8:3:ba:2e0:81ff:fe22:d1f1/128</entry>
         <entry>2001:4f8:3:ba:2e0:81ff:fe22:d1f1/128</entry>
         <entry>2001:4f8:3:ba:2e0:81ff:fe22:d1f1</entry>
        </row>
        <row>
         <entry>::ffff:1.2.3.0/120</entry>
         <entry>::ffff:1.2.3.0/120</entry>
         <entry>::ffff:1.2.3/120</entry>
        </row>
        <row>
         <entry>::ffff:1.2.3.0/128</entry>
         <entry>::ffff:1.2.3.0/128</entry>
         <entry>::ffff:1.2.3.0/128</entry>
        </row>
       </tbody>
      </tgroup>
     </table>
   </sect2>

   <sect2 id="datatype-inet-vs-cidr">
    <title><type>inet</type> vs. <type>cidr</type></title>

    <para>
    The essential difference between <type>inet</type> and <type>cidr</type>
    data types is that <type>inet</type> accepts values with nonzero bits to
    the right of the netmask, whereas <type>cidr</type> does not.
    </para>

      <tip>
        <para>
        If you do not like the output format for <type>inet</type> or
        <type>cidr</type> values, try the functions <function>host</>,
        <function>text</>, and <function>abbrev</>.
        </para>
      </tip>
   </sect2>

   <sect2 id="datatype-macaddr">
    <title><type>macaddr</type></title>

    <indexterm>
     <primary>macaddr (data type)</primary>
    </indexterm>

    <indexterm>
     <primary>MAC address</primary>
     <see>macaddr</see>
    </indexterm>

    <para>
     The <type>macaddr</> type stores MAC addresses, known for example
     from Ethernet card hardware addresses (although MAC addresses are
     used for other purposes as well).  Input is accepted in the
     following formats:

     <simplelist>
      <member><literal>'08:00:2b:01:02:03'</></member>
      <member><literal>'08-00-2b-01-02-03'</></member>
      <member><literal>'08002b:010203'</></member>
      <member><literal>'08002b-010203'</></member>
      <member><literal>'0800.2b01.0203'</></member>
      <member><literal>'0800-2b01-0203'</></member>
      <member><literal>'08002b010203'</></member>
     </simplelist>

     These examples would all specify the same address.  Upper and
     lower case is accepted for the digits
     <literal>a</> through <literal>f</>.  Output is always in the
     first of the forms shown.
    </para>

    <para>
     IEEE Std 802-2001 specifies the second shown form (with hyphens)
     as the canonical form for MAC addresses, and specifies the first
     form (with colons) as the bit-reversed notation, so that
     08-00-2b-01-02-03 = 01:00:4D:08:04:0C.  This convention is widely
     ignored nowadays, and it is relevant only for obsolete network
     protocols (such as Token Ring).  PostgreSQL makes no provisions
     for bit reversal, and all accepted formats use the canonical LSB
     order.
    </para>

    <para>
     The remaining five input formats are not part of any standard.
    </para>
   </sect2>

  </sect1>

  <sect1 id="datatype-bit">
   <title>Bit String Types</title>

   <indexterm zone="datatype-bit">
    <primary>bit string</primary>
    <secondary>data type</secondary>
   </indexterm>

   <para>
    Bit strings are strings of 1's and 0's.  They can be used to store
    or visualize bit masks.  There are two SQL bit types:
    <type>bit(<replaceable>n</replaceable>)</type> and <type>bit
    varying(<replaceable>n</replaceable>)</type>, where
    <replaceable>n</replaceable> is a positive integer.
   </para>

   <para>
    <type>bit</type> type data must match the length
    <replaceable>n</replaceable> exactly; it is an error to attempt to
    store shorter or longer bit strings.  <type>bit varying</type> data is
    of variable length up to the maximum length
    <replaceable>n</replaceable>; longer strings will be rejected.
    Writing <type>bit</type> without a length is equivalent to
    <literal>bit(1)</literal>, while <type>bit varying</type> without a length
    specification means unlimited length.
   </para>

   <note>
    <para>
     If one explicitly casts a bit-string value to
     <type>bit(<replaceable>n</>)</type>, it will be truncated or
     zero-padded on the right to be exactly <replaceable>n</> bits,
     without raising an error.  Similarly,
     if one explicitly casts a bit-string value to
     <type>bit varying(<replaceable>n</>)</type>, it will be truncated
     on the right if it is more than <replaceable>n</> bits.
    </para>
   </note>

   <para>
    Refer to <xref
    linkend="sql-syntax-bit-strings"> for information about the syntax
    of bit string constants.  Bit-logical operators and string
    manipulation functions are available; see <xref
    linkend="functions-bitstring">.
   </para>

   <example>
    <title>Using the Bit String Types</title>

<programlisting>
CREATE TABLE test (a BIT(3), b BIT VARYING(5));
INSERT INTO test VALUES (B'101', B'00');
INSERT INTO test VALUES (B'10', B'101');
<computeroutput>
ERROR:  bit string length 2 does not match type bit(3)
</computeroutput>
INSERT INTO test VALUES (B'10'::bit(3), B'101');
SELECT * FROM test;
<computeroutput>
  a  |  b
-----+-----
 101 | 00
 100 | 101
</computeroutput>
</programlisting>
   </example>

   <para>
    A bit string value requires 1 byte for each group of 8 bits, plus
    5 or 8 bytes overhead depending on the length of the string
    (but long values may be compressed or moved out-of-line, as explained
    in <xref linkend="datatype-character"> for character strings).
   </para>
  </sect1>

  <sect1 id="datatype-textsearch">
   <title>Text Search Types</title>

   <indexterm zone="datatype-textsearch">
    <primary>full text search</primary>
    <secondary>data types</secondary>
   </indexterm>

   <indexterm zone="datatype-textsearch">
    <primary>text search</primary>
    <secondary>data types</secondary>
   </indexterm>

   <para>
    <productname>PostgreSQL</productname> provides two data types that
    are designed to support full text search, which is the activity of
    searching through a collection of natural-language <firstterm>documents</>
    to locate those that best match a <firstterm>query</>.
    The <type>tsvector</type> type represents a document in a form optimized
    for text search; the <type>tsquery</type> type similarly represents
    a text query.
    <xref linkend="textsearch"> provides a detailed explanation of this
    facility, and <xref linkend="functions-textsearch"> summarizes the
    related functions and operators.
   </para>

   <sect2 id="datatype-tsvector">
    <title><type>tsvector</type></title>

    <indexterm>
     <primary>tsvector (data type)</primary>
    </indexterm>

    <para>
     A <type>tsvector</type> value is a sorted list of distinct
     <firstterm>lexemes</>, which are words that have been
     <firstterm>normalized</> to merge different variants of the same word
     (see <xref linkend="textsearch"> for details).  Sorting and
     duplicate-elimination are done automatically during input, as shown in
     this example:

<programlisting>
SELECT 'a fat cat sat on a mat and ate a fat rat'::tsvector;
                      tsvector
----------------------------------------------------
 'a' 'and' 'ate' 'cat' 'fat' 'mat' 'on' 'rat' 'sat'
</programlisting>

     To represent
     lexemes containing whitespace or punctuation, surround them with quotes:

<programlisting>
SELECT $$the lexeme '    ' contains spaces$$::tsvector;
                 tsvector                  
-------------------------------------------
 '    ' 'contains' 'lexeme' 'spaces' 'the'
</programlisting>

     (We use dollar-quoted string literals in this example and the next one
     to avoid the confusion of having to double quote marks within the
     literals.)  Embedded quotes and backslashes must be doubled:

<programlisting>
SELECT $$the lexeme 'Joe''s' contains a quote$$::tsvector;
                    tsvector                    
------------------------------------------------
 'Joe''s' 'a' 'contains' 'lexeme' 'quote' 'the'
</programlisting>

     Optionally, integer <firstterm>positions</>
     can be attached to lexemes:

<programlisting>
SELECT 'a:1 fat:2 cat:3 sat:4 on:5 a:6 mat:7 and:8 ate:9 a:10 fat:11 rat:12'::tsvector;
                                  tsvector
-------------------------------------------------------------------------------
 'a':1,6,10 'and':8 'ate':9 'cat':3 'fat':2,11 'mat':7 'on':5 'rat':12 'sat':4
</programlisting>

     A position normally indicates the source word's location in the
     document.  Positional information can be used for
     <firstterm>proximity ranking</firstterm>.  Position values can
     range from 1 to 16383; larger numbers are silently set to 16383.
     Duplicate positions for the same lexeme are discarded.
    </para>

    <para>
     Lexemes that have positions can further be labeled with a
     <firstterm>weight</>, which can be <literal>A</literal>,
     <literal>B</literal>, <literal>C</literal>, or <literal>D</literal>.
     <literal>D</literal> is the default and hence is not shown on output:

<programlisting>
SELECT 'a:1A fat:2B,4C cat:5D'::tsvector;
          tsvector          
----------------------------
 'a':1A 'cat':5 'fat':2B,4C
</programlisting>

     Weights are typically used to reflect document structure, for example
     by marking title words differently from body words.  Text search
     ranking functions can assign different priorities to the different
     weight markers.
    </para>

    <para>
     It is important to understand that the
     <type>tsvector</type> type itself does not perform any word
     normalization; it assumes the words it is given are normalized
     appropriately for the application.  For example,

<programlisting>
SELECT 'The Fat Rats'::tsvector;
      tsvector      
--------------------
 'Fat' 'Rats' 'The'
</programlisting>

     For most English-text-searching applications the above words would
     be considered non-normalized, but <type>tsvector</type> doesn't care.
     Raw document text should usually be passed through
     <function>to_tsvector</> to normalize the words appropriately
     for searching:

<programlisting>
SELECT to_tsvector('english', 'The Fat Rats');
   to_tsvector   
-----------------
 'fat':2 'rat':3
</programlisting>

     Again, see <xref linkend="textsearch"> for more detail.
    </para>

   </sect2>

   <sect2 id="datatype-tsquery">
    <title><type>tsquery</type></title>

    <indexterm>
     <primary>tsquery (data type)</primary>
    </indexterm>

    <para>
     A <type>tsquery</type> value stores lexemes that are to be
     searched for, and can combine them using the Boolean operators
     <literal>&amp;</literal> (AND), <literal>|</literal> (OR), and
     <literal>!</> (NOT), as well as the phrase search operator
     <literal>&lt;-&gt;</> (FOLLOWED BY).  There is also a variant
     <literal>&lt;<replaceable>N</>&gt;</literal> of the FOLLOWED BY
     operator, where <replaceable>N</> is an integer constant that
     specifies the distance between the two lexemes being searched
     for.  <literal>&lt;-&gt;</> is equivalent to <literal>&lt;1&gt;</>.
    </para>

    <para>
     Parentheses can be used to enforce grouping of these operators.
     In the absence of parentheses, <literal>!</> (NOT) binds most tightly,
     <literal>&lt;-&gt;</literal> (FOLLOWED BY) next most tightly, then
     <literal>&amp;</literal> (AND), with <literal>|</literal> (OR) binding
     the least tightly.
    </para>

    <para>
     Here are some examples:

<programlisting>
SELECT 'fat &amp; rat'::tsquery;
    tsquery    
---------------
 'fat' &amp; 'rat'

SELECT 'fat &amp; (rat | cat)'::tsquery;
          tsquery          
---------------------------
 'fat' &amp; ( 'rat' | 'cat' )

SELECT 'fat &amp; rat &amp; ! cat'::tsquery;
        tsquery         
------------------------
 'fat' &amp; 'rat' &amp; !'cat'
</programlisting>
    </para>

    <para>
     Optionally, lexemes in a <type>tsquery</type> can be labeled with
     one or more weight letters, which restricts them to match only
     <type>tsvector</> lexemes with one of those weights:

<programlisting>
SELECT 'fat:ab &amp; cat'::tsquery;
    tsquery
------------------
 'fat':AB &amp; 'cat'
</programlisting>
    </para>

    <para>
     Also, lexemes in a <type>tsquery</type> can be labeled with <literal>*</>
     to specify prefix matching:
<programlisting>
SELECT 'super:*'::tsquery;
  tsquery  
-----------
 'super':*
</programlisting>
     This query will match any word in a <type>tsvector</> that begins
     with <quote>super</>.
    </para>

    <para>
     Quoting rules for lexemes are the same as described previously for
     lexemes in <type>tsvector</>; and, as with <type>tsvector</>,
     any required normalization of words must be done before converting
     to the <type>tsquery</> type.  The <function>to_tsquery</>
     function is convenient for performing such normalization:

<programlisting>
SELECT to_tsquery('Fat:ab &amp; Cats');
    to_tsquery    
------------------
 'fat':AB &amp; 'cat'
</programlisting>

     Note that <function>to_tsquery</> will process prefixes in the same way
     as other words, which means this comparison returns true:

<programlisting>
SELECT to_tsvector( 'postgraduate' ) @@ to_tsquery( 'postgres:*' );
 ?column?
----------
 t
</programlisting>
     because <literal>postgres</> gets stemmed to <literal>postgr</>:
<programlisting>
SELECT to_tsvector( 'postgraduate' ), to_tsquery( 'postgres:*' );
  to_tsvector  | to_tsquery
---------------+------------
 'postgradu':1 | 'postgr':*
</programlisting>
     which will match the stemmed form of <literal>postgraduate</>.
    </para>

   </sect2>

  </sect1>

  <sect1 id="datatype-uuid">
   <title><acronym>UUID</acronym> Type</title>

   <indexterm zone="datatype-uuid">
    <primary>UUID</primary>
   </indexterm>

   <para>
    The data type <type>uuid</type> stores Universally Unique Identifiers
    (UUID) as defined by RFC 4122, ISO/IEC 9834-8:2005, and related standards.
    (Some systems refer to this data type as a globally unique identifier, or
    GUID,<indexterm><primary>GUID</primary></indexterm> instead.)  This
    identifier is a 128-bit quantity that is generated by an algorithm chosen
    to make it very unlikely that the same identifier will be generated by
    anyone else in the known universe using the same algorithm.  Therefore,
    for distributed systems, these identifiers provide a better uniqueness
    guarantee than sequence generators, which
    are only unique within a single database.
   </para>

   <para>
    A UUID is written as a sequence of lower-case hexadecimal digits,
    in several groups separated by hyphens, specifically a group of 8
    digits followed by three groups of 4 digits followed by a group of
    12 digits, for a total of 32 digits representing the 128 bits.  An
    example of a UUID in this standard form is:
<programlisting>
a0eebc99-9c0b-4ef8-bb6d-6bb9bd380a11
</programlisting>
    <productname>PostgreSQL</productname> also accepts the following
    alternative forms for input:
    use of upper-case digits, the standard format surrounded by
    braces, omitting some or all hyphens, adding a hyphen after any
    group of four digits.  Examples are:
<programlisting>
A0EEBC99-9C0B-4EF8-BB6D-6BB9BD380A11
{a0eebc99-9c0b-4ef8-bb6d-6bb9bd380a11}
a0eebc999c0b4ef8bb6d6bb9bd380a11
a0ee-bc99-9c0b-4ef8-bb6d-6bb9-bd38-0a11
{a0eebc99-9c0b4ef8-bb6d6bb9-bd380a11}
</programlisting>
    Output is always in the standard form.
   </para>

   <para>
    <productname>PostgreSQL</productname> provides storage and comparison
    functions for UUIDs, but the core database does not include any
    function for generating UUIDs, because no single algorithm is well
    suited for every application.  The <xref
    linkend="uuid-ossp"> module
    provides functions that implement several standard algorithms.
    The <xref linkend="pgcrypto"> module also provides a generation
    function for random UUIDs.
    Alternatively, UUIDs could be generated by client applications or
    other libraries invoked through a server-side function.
   </para>
  </sect1>

  <sect1 id="datatype-xml">
   <title><acronym>XML</> Type</title>

   <indexterm zone="datatype-xml">
    <primary>XML</primary>
   </indexterm>

   <para>
    The <type>xml</type> data type can be used to store XML data.  Its
    advantage over storing XML data in a <type>text</type> field is that it
    checks the input values for well-formedness, and there are support
    functions to perform type-safe operations on it; see <xref
    linkend="functions-xml">.  Use of this data type requires the
    installation to have been built with <command>configure
    --with-libxml</>.
   </para>

   <para>
    The <type>xml</type> type can store well-formed
    <quote>documents</quote>, as defined by the XML standard, as well
    as <quote>content</quote> fragments, which are defined by the
    production <literal>XMLDecl? content</literal> in the XML
    standard.  Roughly, this means that content fragments can have
    more than one top-level element or character node.  The expression
    <literal><replaceable>xmlvalue</replaceable> IS DOCUMENT</literal>
    can be used to evaluate whether a particular <type>xml</type>
    value is a full document or only a content fragment.
   </para>

   <sect2>
    <title>Creating XML Values</title>
   <para>
    To produce a value of type <type>xml</type> from character data,
    use the function
    <function>xmlparse</function>:<indexterm><primary>xmlparse</primary></indexterm>
<synopsis>
XMLPARSE ( { DOCUMENT | CONTENT } <replaceable>value</replaceable>)
</synopsis>
    Examples:
<programlisting><![CDATA[
XMLPARSE (DOCUMENT '<?xml version="1.0"?><book><title>Manual</title><chapter>...</chapter></book>')
XMLPARSE (CONTENT 'abc<foo>bar</foo><bar>foo</bar>')
]]></programlisting>
    While this is the only way to convert character strings into XML
    values according to the SQL standard, the PostgreSQL-specific
    syntaxes:
<programlisting><![CDATA[
xml '<foo>bar</foo>'
'<foo>bar</foo>'::xml
]]></programlisting>
    can also be used.
   </para>

   <para>
    The <type>xml</type> type does not validate input values
    against a document type declaration
    (DTD),<indexterm><primary>DTD</primary></indexterm>
    even when the input value specifies a DTD.
    There is also currently no built-in support for validating against
    other XML schema languages such as XML Schema.
   </para>

   <para>
    The inverse operation, producing a character string value from
    <type>xml</type>, uses the function
    <function>xmlserialize</function>:<indexterm><primary>xmlserialize</primary></indexterm>
<synopsis>
XMLSERIALIZE ( { DOCUMENT | CONTENT } <replaceable>value</replaceable> AS <replaceable>type</replaceable> )
</synopsis>
    <replaceable>type</replaceable> can be
    <type>character</type>, <type>character varying</type>, or
    <type>text</type> (or an alias for one of those).  Again, according
    to the SQL standard, this is the only way to convert between type
    <type>xml</type> and character types, but PostgreSQL also allows
    you to simply cast the value.
   </para>

   <para>
    When a character string value is cast to or from type
    <type>xml</type> without going through <type>XMLPARSE</type> or
    <type>XMLSERIALIZE</type>, respectively, the choice of
    <literal>DOCUMENT</literal> versus <literal>CONTENT</literal> is
    determined by the <quote>XML option</quote>
    <indexterm><primary>XML option</primary></indexterm>
    session configuration parameter, which can be set using the
    standard command:
<synopsis>
SET XML OPTION { DOCUMENT | CONTENT };
</synopsis>
    or the more PostgreSQL-like syntax
<synopsis>
SET xmloption TO { DOCUMENT | CONTENT };
</synopsis>
    The default is <literal>CONTENT</literal>, so all forms of XML
    data are allowed.
   </para>

   <note>
    <para>
     With the default XML option setting, you cannot directly cast
     character strings to type <type>xml</type> if they contain a
     document type declaration, because the definition of XML content
     fragment does not accept them.  If you need to do that, either
     use <literal>XMLPARSE</literal> or change the XML option.
    </para>
   </note>

   </sect2>

   <sect2>
    <title>Encoding Handling</title>
   <para>
    Care must be taken when dealing with multiple character encodings
    on the client, server, and in the XML data passed through them.
    When using the text mode to pass queries to the server and query
    results to the client (which is the normal mode), PostgreSQL
    converts all character data passed between the client and the
    server and vice versa to the character encoding of the respective
    end; see <xref linkend="multibyte">.  This includes string
    representations of XML values, such as in the above examples.
    This would ordinarily mean that encoding declarations contained in
    XML data can become invalid as the character data is converted
    to other encodings while traveling between client and server,
    because the embedded encoding declaration is not changed.  To cope
    with this behavior, encoding declarations contained in
    character strings presented for input to the <type>xml</type> type
    are <emphasis>ignored</emphasis>, and content is assumed
    to be in the current server encoding.  Consequently, for correct
    processing, character strings of XML data must be sent
    from the client in the current client encoding.  It is the
    responsibility of the client to either convert documents to the
    current client encoding before sending them to the server, or to
    adjust the client encoding appropriately.  On output, values of
    type <type>xml</type> will not have an encoding declaration, and
    clients should assume all data is in the current client
    encoding.
   </para>

   <para>
    When using binary mode to pass query parameters to the server
    and query results back to the client, no encoding conversion
    is performed, so the situation is different.  In this case, an
    encoding declaration in the XML data will be observed, and if it
    is absent, the data will be assumed to be in UTF-8 (as required by
    the XML standard; note that PostgreSQL does not support UTF-16).
    On output, data will have an encoding declaration
    specifying the client encoding, unless the client encoding is
    UTF-8, in which case it will be omitted.
   </para>

   <para>
    Needless to say, processing XML data with PostgreSQL will be less
    error-prone and more efficient if the XML data encoding, client encoding,
    and server encoding are the same.  Since XML data is internally
    processed in UTF-8, computations will be most efficient if the
    server encoding is also UTF-8.
   </para>

   <caution>
    <para>
     Some XML-related functions may not work at all on non-ASCII data
     when the server encoding is not UTF-8.  This is known to be an
     issue for <function>xpath()</> in particular.
    </para>
   </caution>
   </sect2>

   <sect2>
   <title>Accessing XML Values</title>

   <para>
    The <type>xml</type> data type is unusual in that it does not
    provide any comparison operators.  This is because there is no
    well-defined and universally useful comparison algorithm for XML
    data.  One consequence of this is that you cannot retrieve rows by
    comparing an <type>xml</type> column against a search value.  XML
    values should therefore typically be accompanied by a separate key
    field such as an ID.  An alternative solution for comparing XML
    values is to convert them to character strings first, but note
    that character string comparison has little to do with a useful
    XML comparison method.
   </para>

   <para>
    Since there are no comparison operators for the <type>xml</type>
    data type, it is not possible to create an index directly on a
    column of this type.  If speedy searches in XML data are desired,
    possible workarounds include casting the expression to a
    character string type and indexing that, or indexing an XPath
    expression.  Of course, the actual query would have to be adjusted
    to search by the indexed expression.
   </para>

   <para>
    The text-search functionality in PostgreSQL can also be used to speed
    up full-document searches of XML data.  The necessary
    preprocessing support is, however, not yet available in the PostgreSQL
    distribution.
   </para>
   </sect2>
  </sect1>

  &json;

  &array;

  &rowtypes;

  &rangetypes;

  <sect1 id="datatype-oid">
   <title>Object Identifier Types</title>

   <indexterm zone="datatype-oid">
    <primary>object identifier</primary>
    <secondary>data type</secondary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>oid</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regproc</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regprocedure</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regoper</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regoperator</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regclass</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regtype</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regconfig</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>regdictionary</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>xid</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>cid</primary>
   </indexterm>

   <indexterm zone="datatype-oid">
    <primary>tid</primary>
   </indexterm>

   <para>
    Object identifiers (OIDs) are used internally by
    <productname>PostgreSQL</productname> as primary keys for various
    system tables.  OIDs are not added to user-created tables, unless
    <literal>WITH OIDS</literal> is specified when the table is
    created, or the <xref linkend="guc-default-with-oids">
    configuration variable is enabled.  Type <type>oid</> represents
    an object identifier.  There are also several alias types for
    <type>oid</>: <type>regproc</>, <type>regprocedure</>,
    <type>regoper</>, <type>regoperator</>, <type>regclass</>,
    <type>regtype</>, <type>regrole</>, <type>regnamespace</>,
    <type>regconfig</>, and <type>regdictionary</>.
    <xref linkend="datatype-oid-table"> shows an overview.
   </para>

   <para>
    The <type>oid</> type is currently implemented as an unsigned
    four-byte integer.  Therefore, it is not large enough to provide
    database-wide uniqueness in large databases, or even in large
    individual tables.  So, using a user-created table's OID column as
    a primary key is discouraged.  OIDs are best used only for
    references to system tables.
   </para>

   <para>
    The <type>oid</> type itself has few operations beyond comparison.
    It can be cast to integer, however, and then manipulated using the
    standard integer operators.  (Beware of possible
    signed-versus-unsigned confusion if you do this.)
   </para>

   <para>
    The OID alias types have no operations of their own except
    for specialized input and output routines.  These routines are able
    to accept and display symbolic names for system objects, rather than
    the raw numeric value that type <type>oid</> would use.  The alias
    types allow simplified lookup of OID values for objects.  For example,
    to examine the <structname>pg_attribute</> rows related to a table
    <literal>mytable</>, one could write:
<programlisting>
SELECT * FROM pg_attribute WHERE attrelid = 'mytable'::regclass;
</programlisting>
    rather than:
<programlisting>
SELECT * FROM pg_attribute
  WHERE attrelid = (SELECT oid FROM pg_class WHERE relname = 'mytable');
</programlisting>
    While that doesn't look all that bad by itself, it's still oversimplified.
    A far more complicated sub-select would be needed to
    select the right OID if there are multiple tables named
    <literal>mytable</> in different schemas.
    The <type>regclass</> input converter handles the table lookup according
    to the schema path setting, and so it does the <quote>right thing</>
    automatically.  Similarly, casting a table's OID to
    <type>regclass</> is handy for symbolic display of a numeric OID.
   </para>

    <table id="datatype-oid-table">
     <title>Object Identifier Types</title>
     <tgroup cols="4">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>References</entry>
        <entry>Description</entry>
        <entry>Value Example</entry>
       </row>
      </thead>

      <tbody>

       <row>
        <entry><type>oid</></entry>
        <entry>any</entry>
        <entry>numeric object identifier</entry>
        <entry><literal>564182</></entry>
       </row>

       <row>
        <entry><type>regproc</></entry>
        <entry><structname>pg_proc</></entry>
        <entry>function name</entry>
        <entry><literal>sum</></entry>
       </row>

       <row>
        <entry><type>regprocedure</></entry>
        <entry><structname>pg_proc</></entry>
        <entry>function with argument types</entry>
        <entry><literal>sum(int4)</></entry>
       </row>

       <row>
        <entry><type>regoper</></entry>
        <entry><structname>pg_operator</></entry>
        <entry>operator name</entry>
        <entry><literal>+</></entry>
       </row>

       <row>
        <entry><type>regoperator</></entry>
        <entry><structname>pg_operator</></entry>
        <entry>operator with argument types</entry>
        <entry><literal>*(integer,integer)</> or <literal>-(NONE,integer)</></entry>
       </row>

       <row>
        <entry><type>regclass</></entry>
        <entry><structname>pg_class</></entry>
        <entry>relation name</entry>
        <entry><literal>pg_type</></entry>
       </row>

       <row>
        <entry><type>regtype</></entry>
        <entry><structname>pg_type</></entry>
        <entry>data type name</entry>
        <entry><literal>integer</></entry>
       </row>

       <row>
        <entry><type>regrole</></entry>
        <entry><structname>pg_authid</></entry>
        <entry>role name</entry>
        <entry><literal>smithee</></entry>
       </row>

       <row>
        <entry><type>regnamespace</></entry>
        <entry><structname>pg_namespace</></entry>
        <entry>namespace name</entry>
        <entry><literal>pg_catalog</></entry>
       </row>

       <row>
        <entry><type>regconfig</></entry>
        <entry><structname>pg_ts_config</></entry>
        <entry>text search configuration</entry>
        <entry><literal>english</></entry>
       </row>

       <row>
        <entry><type>regdictionary</></entry>
        <entry><structname>pg_ts_dict</></entry>
        <entry>text search dictionary</entry>
        <entry><literal>simple</></entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <para>
    All of the OID alias types for objects grouped by namespace accept
    schema-qualified names, and will
    display schema-qualified names on output if the object would not
    be found in the current search path without being qualified.
    The <type>regproc</> and <type>regoper</> alias types will only
    accept input names that are unique (not overloaded), so they are
    of limited use; for most uses <type>regprocedure</> or
    <type>regoperator</> are more appropriate.  For <type>regoperator</>,
    unary operators are identified by writing <literal>NONE</> for the unused
    operand.
   </para>

   <para>
    An additional property of most of the OID alias types is the creation of
    dependencies.  If a
    constant of one of these types appears in a stored expression
    (such as a column default expression or view), it creates a dependency
    on the referenced object.  For example, if a column has a default
    expression <literal>nextval('my_seq'::regclass)</>,
    <productname>PostgreSQL</productname>
    understands that the default expression depends on the sequence
    <literal>my_seq</>; the system will not let the sequence be dropped
    without first removing the default expression.
    <type>regrole</> is the only exception for the property. Constants of this
    type are not allowed in such expressions.
   </para>

   <note>
   <para>
    The OID alias types do not completely follow transaction isolation
    rules. The planner also treats them as simple constants, which may
    result in sub-optimal planning.
   </para>
   </note>

   <para>
    Another identifier type used by the system is <type>xid</>, or transaction
    (abbreviated <abbrev>xact</>) identifier.  This is the data type of the system columns
    <structfield>xmin</> and <structfield>xmax</>.  Transaction identifiers are 32-bit quantities.
   </para>

   <para>
    A third identifier type used by the system is <type>cid</>, or
    command identifier.  This is the data type of the system columns
    <structfield>cmin</> and <structfield>cmax</>. Command identifiers are also 32-bit quantities.
   </para>

   <para>
    A final identifier type used by the system is <type>tid</>, or tuple
    identifier (row identifier).  This is the data type of the system column
    <structfield>ctid</>.  A tuple ID is a pair
    (block number, tuple index within block) that identifies the
    physical location of the row within its table.
   </para>

   <para>
    (The system columns are further explained in <xref
    linkend="ddl-system-columns">.)
   </para>
  </sect1>

  <sect1 id="datatype-pg-lsn">
   <title><acronym>pg_lsn Type</acronym></title>

   <indexterm zone="datatype-pg-lsn">
    <primary>pg_lsn</primary>
   </indexterm>

   <para>
    The <type>pg_lsn</type> data type can be used to store LSN (Log Sequence
    Number) data which is a pointer to a location in the XLOG. This type is a
    representation of <type>XLogRecPtr</type> and an internal system type of
    <productname>PostgreSQL</productname>.
   </para>

   <para>
    Internally, an LSN is a 64-bit integer, representing a byte position in
    the write-ahead log stream.  It is printed as two hexadecimal numbers of
    up to 8 digits each, separated by a slash; for example,
    <literal>16/B374D848</>.  The <type>pg_lsn</type> type supports the
    standard comparison operators, like <literal>=</literal> and
    <literal>&gt;</literal>.  Two LSNs can be subtracted using the
    <literal>-</literal> operator; the result is the number of bytes separating
    those write-ahead log positions.
   </para>
  </sect1>

  <sect1 id="datatype-pseudo">
   <title>Pseudo-Types</title>

   <indexterm zone="datatype-pseudo">
    <primary>record</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>any</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>anyelement</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>anyarray</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>anynonarray</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>anyenum</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>anyrange</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>void</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>trigger</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>event_trigger</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>pg_ddl_command</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>language_handler</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>fdw_handler</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>index_am_handler</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>tsm_handler</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>cstring</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>internal</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>unknown</primary>
   </indexterm>

   <indexterm zone="datatype-pseudo">
    <primary>opaque</primary>
   </indexterm>

   <para>
    The <productname>PostgreSQL</productname> type system contains a
    number of special-purpose entries that are collectively called
    <firstterm>pseudo-types</>.  A pseudo-type cannot be used as a
    column data type, but it can be used to declare a function's
    argument or result type.  Each of the available pseudo-types is
    useful in situations where a function's behavior does not
    correspond to simply taking or returning a value of a specific
    <acronym>SQL</acronym> data type.  <xref
    linkend="datatype-pseudotypes-table"> lists the existing
    pseudo-types.
   </para>

    <table id="datatype-pseudotypes-table">
     <title>Pseudo-Types</title>
     <tgroup cols="2">
      <thead>
       <row>
        <entry>Name</entry>
        <entry>Description</entry>
       </row>
      </thead>

      <tbody>
       <row>
        <entry><type>any</></entry>
        <entry>Indicates that a function accepts any input data type.</entry>
       </row>

       <row>
        <entry><type>anyelement</></entry>
        <entry>Indicates that a function accepts any data type
        (see <xref linkend="extend-types-polymorphic">).</entry>
       </row>

       <row>
        <entry><type>anyarray</></entry>
        <entry>Indicates that a function accepts any array data type
        (see <xref linkend="extend-types-polymorphic">).</entry>
       </row>

       <row>
        <entry><type>anynonarray</></entry>
        <entry>Indicates that a function accepts any non-array data type
        (see <xref linkend="extend-types-polymorphic">).</entry>
       </row>

       <row>
        <entry><type>anyenum</></entry>
        <entry>Indicates that a function accepts any enum data type
        (see <xref linkend="extend-types-polymorphic"> and
        <xref linkend="datatype-enum">).</entry>
       </row>

       <row>
        <entry><type>anyrange</></entry>
        <entry>Indicates that a function accepts any range data type
        (see <xref linkend="extend-types-polymorphic"> and
        <xref linkend="rangetypes">).</entry>
       </row>

       <row>
        <entry><type>cstring</></entry>
        <entry>Indicates that a function accepts or returns a null-terminated C string.</entry>
       </row>

       <row>
        <entry><type>internal</></entry>
        <entry>Indicates that a function accepts or returns a server-internal
        data type.</entry>
       </row>

       <row>
        <entry><type>language_handler</></entry>
        <entry>A procedural language call handler is declared to return <type>language_handler</>.</entry>
       </row>

       <row>
        <entry><type>fdw_handler</></entry>
        <entry>A foreign-data wrapper handler is declared to return <type>fdw_handler</>.</entry>
       </row>

       <row>
        <entry><type>index_am_handler</></entry>
        <entry>An index access method handler is declared to return <type>index_am_handler</>.</entry>
       </row>

       <row>
        <entry><type>tsm_handler</></entry>
        <entry>A tablesample method handler is declared to return <type>tsm_handler</>.</entry>
       </row>

       <row>
        <entry><type>record</></entry>
        <entry>Identifies a function taking or returning an unspecified row type.</entry>
       </row>

       <row>
        <entry><type>trigger</></entry>
        <entry>A trigger function is declared to return <type>trigger.</></entry>
       </row>

       <row>
        <entry><type>event_trigger</></entry>
        <entry>An event trigger function is declared to return <type>event_trigger.</></entry>
       </row>

       <row>
        <entry><type>pg_ddl_command</></entry>
        <entry>Identifies a representation of DDL commands that is available to event triggers.</entry>
       </row>

       <row>
        <entry><type>void</></entry>
        <entry>Indicates that a function returns no value.</entry>
       </row>

       <row>
        <entry><type>unknown</></entry>
        <entry>Identifies a not-yet-resolved type, e.g. of an undecorated
         string literal.</entry>
       </row>

       <row>
        <entry><type>opaque</></entry>
        <entry>An obsolete type name that formerly served many of the above
         purposes.</entry>
       </row>
      </tbody>
     </tgroup>
    </table>

   <para>
    Functions coded in C (whether built-in or dynamically loaded) can be
    declared to accept or return any of these pseudo data types.  It is up to
    the function author to ensure that the function will behave safely
    when a pseudo-type is used as an argument type.
   </para>

   <para>
    Functions coded in procedural languages can use pseudo-types only as
    allowed by their implementation languages.  At present most procedural
    languages forbid use of a pseudo-type as an argument type, and allow
    only <type>void</> and <type>record</> as a result type (plus
    <type>trigger</> or <type>event_trigger</> when the function is used
    as a trigger or event trigger).  Some also
    support polymorphic functions using the types <type>anyelement</>,
    <type>anyarray</>, <type>anynonarray</>, <type>anyenum</>, and
    <type>anyrange</>.
   </para>

   <para>
    The <type>internal</> pseudo-type is used to declare functions
    that are meant only to be called internally by the database
    system, and not by direct invocation in an <acronym>SQL</acronym>
    query.  If a function has at least one <type>internal</>-type
    argument then it cannot be called from <acronym>SQL</acronym>.  To
    preserve the type safety of this restriction it is important to
    follow this coding rule: do not create any function that is
    declared to return <type>internal</> unless it has at least one
    <type>internal</> argument.
   </para>

  </sect1>

 </chapter>
