# 2004-11-11 Zhenbang Wei <forth@zbwei.net>
#
msgid ""
msgstr ""
"Project-Id-Version: PostgreSQL 8.0\n"
"POT-Creation-Date: 2004-11-11 01:18+0000\n"
"PO-Revision-Date: 2004-11-11 13:43+0800\n"
"Last-Translator: Zhenbang Wei <forth@zbwei.net>\n"
"Language-Team: Zhenbang Wei <forth@zbwei.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: pg_ctl.c:200
#: pg_ctl.c:215
#: pg_ctl.c:1331
#, c-format
msgid "%s: out of memory\n"
msgstr "%s：記憶體用盡\n"

#: pg_ctl.c:249
#, c-format
msgid "%s: could not open PID file \"%s\": %s"
msgstr "%s：無法開啟PID檔\"%s\"：%s"

#: pg_ctl.c:468
#, c-format
msgid "%s: another postmaster may be running; trying to start postmaster anyway\n"
msgstr "%s：可能有另一個postmaster正在執行，嘗試強制啟動postmaster。\n"

#: pg_ctl.c:486
#, c-format
msgid "%s: could not read file \"%s\"\n"
msgstr "%s：無法讀取檔案\"%s\"\n"

#: pg_ctl.c:492
#, c-format
msgid "%s: option file \"%s\" must have exactly one line\n"
msgstr "%s：選項檔\"%s\"只能有一行內容\n"

#: pg_ctl.c:543
#, c-format
msgid ""
"The program \"postmaster\" is needed by %s but was not found in the\n"
"same directory as \"%s\".\n"
"Check your installation.\n"
msgstr ""
"%s 需要\"postmaster\"程式，但是在與\"%s\"相同的目錄中找不到。\n"
"檢查你的安裝。\n"

#: pg_ctl.c:549
#, c-format
msgid ""
"The program \"postmaster\" was found by \"%s\"\n"
"but was not the same version as %s.\n"
"Check your installation.\n"
msgstr ""
"\"%s\"已找到程式\"postmaster\"，但是與 %s 版本不符。\n"
"請檢查你的安裝。\n"

#: pg_ctl.c:561
#, c-format
msgid "%s: could not start postmaster: exit code was %d\n"
msgstr "%s：無法啟動postmaster：結束碼是 %d\n"

#: pg_ctl.c:572
#, c-format
msgid ""
"%s: could not start postmaster\n"
"Examine the log output.\n"
msgstr ""
"%s：無法啟動postmaster\n"
"請檢查log輸出\n"

#: pg_ctl.c:581
msgid "waiting for postmaster to start..."
msgstr "等待postmaster啟動..."

#: pg_ctl.c:584
msgid "could not start postmaster\n"
msgstr "無法啟動postmaster\n"

#: pg_ctl.c:587
#: pg_ctl.c:653
#: pg_ctl.c:720
msgid " done\n"
msgstr " 完成\n"

#: pg_ctl.c:588
msgid "postmaster started\n"
msgstr "postmaster已經啟動\n"

#: pg_ctl.c:592
msgid "postmaster starting\n"
msgstr "postmaster正在啟動\n"

#: pg_ctl.c:606
#: pg_ctl.c:674
#: pg_ctl.c:734
#, c-format
msgid "%s: PID file \"%s\" does not exist\n"
msgstr "%s：PID檔\"%s\"不存在\n"

#: pg_ctl.c:607
#: pg_ctl.c:675
#: pg_ctl.c:735
msgid "Is postmaster running?\n"
msgstr "postmaster是否正在執行？\n"

#: pg_ctl.c:613
#, c-format
msgid "%s: cannot stop postmaster; postgres is running (PID: %ld)\n"
msgstr "%s：無法停止postmaster，postgres正在執行(PID：%ld)\n"

#: pg_ctl.c:621
#: pg_ctl.c:692
#, c-format
msgid "%s: could not send stop signal (PID: %ld): %s\n"
msgstr "%s：無法傳送stop信號(PID：%ld)：%s\n"

#: pg_ctl.c:628
msgid "postmaster shutting down\n"
msgstr "postmaster正在關閉\n"

#: pg_ctl.c:633
#: pg_ctl.c:697
msgid "waiting for postmaster to shut down..."
msgstr "等待postmaster關閉..."

#: pg_ctl.c:648
#: pg_ctl.c:714
msgid " failed\n"
msgstr " 失敗\n"

#: pg_ctl.c:650
#: pg_ctl.c:716
#, c-format
msgid "%s: postmaster does not shut down\n"
msgstr "%s：postmaster無法關閉\n"

#: pg_ctl.c:655
#: pg_ctl.c:721
msgid "postmaster stopped\n"
msgstr "postmaster停止執行\n"

#: pg_ctl.c:676
msgid "starting postmaster anyway\n"
msgstr "強制啟動postmaster\n"

#: pg_ctl.c:683
#, c-format
msgid "%s: cannot restart postmaster; postgres is running (PID: %ld)\n"
msgstr "%s：無法重新啟動postmaster，postgres正在執行(PID：%ld)\n"

#: pg_ctl.c:686
#: pg_ctl.c:744
msgid "Please terminate postgres and try again.\n"
msgstr "請結束postgres然後再試一次。\n"

#: pg_ctl.c:741
#, c-format
msgid "%s: cannot reload postmaster; postgres is running (PID: %ld)\n"
msgstr "%s：無法重新載入postmaster， postgres正在執行(PID：%ld)\n"

#: pg_ctl.c:750
#, c-format
msgid "%s: could not send reload signal (PID: %ld): %s\n"
msgstr "%s：無法傳送reload信號(PID：%ld)：%s\n"

#: pg_ctl.c:755
msgid "postmaster signaled\n"
msgstr "已通知postmaster\n"

#: pg_ctl.c:770
#, c-format
msgid "%s: neither postmaster nor postgres running\n"
msgstr "%s：postmaster或postgres尚未執行\n"

#: pg_ctl.c:776
#, c-format
msgid "%s: a standalone backend \"postgres\" is running (PID: %ld)\n"
msgstr "%s：一個獨立後端\"postgres\"正在執行(PID：%ld)\n"

#: pg_ctl.c:783
#, c-format
msgid "%s: postmaster is running (PID: %ld)\n"
msgstr "%s：postmaster正在執行(PID：%ld)\n"

#: pg_ctl.c:799
#, c-format
msgid "%s: could not send signal %d (PID: %ld): %s\n"
msgstr "%s：無法傳送信號 %d(PID：%ld)：%s\n"

#: pg_ctl.c:829
#, c-format
msgid "%s: could not find own program executable\n"
msgstr "%s：找不到程式執行檔\n"

#: pg_ctl.c:838
#, c-format
msgid "%s: could not find postmaster program executable\n"
msgstr "%s：找不到postmaster執行檔\n"

#: pg_ctl.c:886
#: pg_ctl.c:918
#, c-format
msgid "%s: could not open service manager\n"
msgstr "%s：無法開啟服務管理員\n"

#: pg_ctl.c:892
#, c-format
msgid "%s: service \"%s\" already registered\n"
msgstr "%s：服務\"%s\"已經被註冊\n"

#: pg_ctl.c:903
#, c-format
msgid "%s: could not register service \"%s\": error code %d\n"
msgstr "%s：無法註冊服務\"%s\"：錯誤代碼%d\n"

#: pg_ctl.c:924
#, c-format
msgid "%s: service \"%s\" not registered\n"
msgstr "%s：服務\"%s\"未被註冊\n"

#: pg_ctl.c:931
#, c-format
msgid "%s: could not open service \"%s\": error code %d\n"
msgstr "%s：無法開啟服務\"%s\"：錯誤代碼%d\n"

#: pg_ctl.c:938
#, c-format
msgid "%s: could not unregister service \"%s\": error code %d\n"
msgstr "%s：無法移除服務\"%s\"：錯誤代碼%d\n"

#: pg_ctl.c:1075
#, c-format
msgid "Try \"%s --help\" for more information.\n"
msgstr "執行\"%s --help\"以顯示更多資訊。\n"

#: pg_ctl.c:1083
#, c-format
msgid ""
"%s is a utility to start, stop, restart, reload configuration files,\n"
"report the status of a PostgreSQL server, or signal a PostgreSQL process.\n"
"\n"
msgstr ""
"%s 可以用來啟動、停止、重新啟動、重新載入設定檔、\n"
"報告PostgreSQL伺服器狀態，或送信號給PostgreSQL行程。\n"
"\n"

#: pg_ctl.c:1085
msgid "Usage:\n"
msgstr "使用方法：\n"

#: pg_ctl.c:1086
#, c-format
msgid "  %s start   [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]\n"
msgstr "  %s start   [-w] [-D 資料目錄] [-s] [-l 檔名] [-o \"選項\"]\n"

#: pg_ctl.c:1087
#, c-format
msgid "  %s stop    [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]\n"
msgstr "  %s stop    [-W] [-D 資料目錄] [-s] [-m 關閉模式]\n"

#: pg_ctl.c:1088
#, c-format
msgid "  %s restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o \"OPTIONS\"]\n"
msgstr "  %s restart [-w] [-D 資料目錄] [-s] [-m 關閉模式] [-o \"選項\"]\n"

#: pg_ctl.c:1089
#, c-format
msgid "  %s reload  [-D DATADIR] [-s]\n"
msgstr "  %s reload  [-D 資料目錄] [-s]\n"

#: pg_ctl.c:1090
#, c-format
msgid "  %s status  [-D DATADIR]\n"
msgstr "  %s status  [-D 資料目錄]\n"

#: pg_ctl.c:1091
#, c-format
msgid "  %s kill    SIGNALNAME PID\n"
msgstr "  %s kill    信號名稱 PID\n"

#: pg_ctl.c:1093
#, c-format
msgid ""
"  %s register   [-N SERVICENAME] [-U USERNAME] [-P PASSWORD] [-D DATADIR]\n"
"                    [-w] [-o \"OPTIONS\"]\n"
msgstr ""
"  %s register   [-N 服務名稱] [-U 使用者] [-P 密碼] [-D 資料目錄] [-w]\n"
"                    [-o \"選項\"]\n"

#: pg_ctl.c:1095
#, c-format
msgid "  %s unregister [-N SERVICENAME]\n"
msgstr "  %s unregister [-N 服務名稱]\n"

#: pg_ctl.c:1098
msgid ""
"\n"
"Common options:\n"
msgstr ""
"\n"
"一般選項：\n"

#: pg_ctl.c:1099
msgid "  -D, --pgdata DATADIR   location of the database storage area\n"
msgstr "  -D, --pgdata 資料目錄  存放資料庫的目錄\n"

#: pg_ctl.c:1100
msgid "  -s, --silent           only print errors, no informational messages\n"
msgstr "  -s, --silent           只顯示錯誤，不顯示其它訊息\n"

#: pg_ctl.c:1101
msgid "  -w                     wait until operation completes\n"
msgstr "  -w                     等待操作完成\n"

#: pg_ctl.c:1102
msgid "  -W                     do not wait until operation completes\n"
msgstr "  -W                     不等待操作完成\n"

#: pg_ctl.c:1103
msgid "  --help                 show this help, then exit\n"
msgstr "  --help                 顯示這份說明然後結束\n"

#: pg_ctl.c:1104
msgid "  --version              output version information, then exit\n"
msgstr "  --version              顯示版本資訊然後結束\n"

#: pg_ctl.c:1105
msgid ""
"(The default is to wait for shutdown, but not for start or restart.)\n"
"\n"
msgstr ""
"(預設是關閉時而非啟動或重新啟動時等待。)\n"
"\n"

#: pg_ctl.c:1106
msgid "If the -D option is omitted, the environment variable PGDATA is used.\n"
msgstr "如果沒有使用選項 -D，改用環境變數PGDATA。\n"

#: pg_ctl.c:1108
msgid ""
"\n"
"Options for start or restart:\n"
msgstr ""
"\n"
"啟動或重新啟動可用選項：\n"

#: pg_ctl.c:1109
msgid "  -l, --log FILENAME     write (or append) server log to FILENAME\n"
msgstr "  -l, --log 檔名         將伺服器log寫入(或附加至)檔案。\n"

#: pg_ctl.c:1110
msgid ""
"  -o OPTIONS             command line options to pass to the postmaster\n"
"                         (PostgreSQL server executable)\n"
msgstr ""
"  -o 選項                傳給postmaster(PostgreSQL伺服器執行檔)的\n"
"                         命令列選項\n"

#: pg_ctl.c:1112
msgid "  -p PATH-TO-POSTMASTER  normally not necessary\n"
msgstr "  -p postmaster的路徑    通常不需要\n"

#: pg_ctl.c:1114
msgid ""
"\n"
"Options for stop or restart:\n"
msgstr ""
"\n"
"停止或重新啟動可用選項：\n"

#: pg_ctl.c:1115
msgid "  -m SHUTDOWN-MODE   may be \"smart\", \"fast\", or \"immediate\"\n"
msgstr "  -m 關閉模式        可以是\"smart\"、\"fast\"或\"immediate\"\n"

#: pg_ctl.c:1117
msgid ""
"\n"
"Shutdown modes are:\n"
msgstr ""
"\n"
"可用關閉模式：\n"

#: pg_ctl.c:1118
msgid "  smart       quit after all clients have disconnected\n"
msgstr "  smart       在所有用戶端斷線後關閉\n"

#: pg_ctl.c:1119
msgid "  fast        quit directly, with proper shutdown\n"
msgstr "  fast        直接正常關閉\n"

#: pg_ctl.c:1120
msgid "  immediate   quit without complete shutdown; will lead to recovery on restart\n"
msgstr "  immediate   立即結束，會導致下次啟動時需要復原程序\n"

#: pg_ctl.c:1122
msgid ""
"\n"
"Allowed signal names for kill:\n"
msgstr ""
"\n"
"kill可以使用的信號名稱：\n"

#: pg_ctl.c:1126
msgid ""
"\n"
"Options for register and unregister:\n"
msgstr ""
"\n"
"註冊或移除註冊可用選項：\n"

#: pg_ctl.c:1127
msgid "  -N SERVICENAME  service name with which to register PostgreSQL server\n"
msgstr "  -N 服務名稱     用來註冊PostgreSQL伺服器的服務名稱\n"

#: pg_ctl.c:1128
msgid "  -P PASSWORD     password of account to register PostgreSQL server\n"
msgstr "  -P 密碼         用來註冊PostgreSQL伺服器的密碼\n"

#: pg_ctl.c:1129
msgid "  -U USERNAME     user name of account to register PostgreSQL server\n"
msgstr "  -U 使用者       用來註冊PostgreSQL伺服器的帳號\n"

#: pg_ctl.c:1132
msgid ""
"\n"
"Report bugs to <pgsql-bugs@postgresql.org>.\n"
msgstr ""
"\n"
"回報錯誤至<pgsql-bugs@postgresql.org>。\n"

#: pg_ctl.c:1157
#, c-format
msgid "%s: unrecognized shutdown mode \"%s\"\n"
msgstr "%s：無效的關閉模式\"%s\"\n"

#: pg_ctl.c:1190
#, c-format
msgid "%s: unrecognized signal name \"%s\"\n"
msgstr "%s：無效的信號名稱\"%s\"\n"

#: pg_ctl.c:1255
#, c-format
msgid ""
"%s: cannot be run as root\n"
"Please log in (using, e.g., \"su\") as the (unprivileged) user that will\n"
"own the server process.\n"
msgstr ""
"%s：無法以root身份執行\n"
"請以將會擁有伺服務行程的(非特權)使用者登入(例如用\"su\"命令)。\n"

#: pg_ctl.c:1347
#, c-format
msgid "%s: invalid option %s\n"
msgstr "%s：無效的選項 %s\n"

#: pg_ctl.c:1358
#, c-format
msgid "%s: too many command-line arguments (first is \"%s\")\n"
msgstr "%s：命令列參數過多(第一個是\"%s\")\n"

#: pg_ctl.c:1377
#, c-format
msgid "%s: missing arguments for kill mode\n"
msgstr "%s：kill模式未指定參數\n"

#: pg_ctl.c:1395
#, c-format
msgid "%s: unrecognized operation mode \"%s\"\n"
msgstr "%s：無效的操作模式\"%s\"\n"

#: pg_ctl.c:1405
#, c-format
msgid "%s: no operation specified\n"
msgstr "%s：未指定操作方式\n"

#: pg_ctl.c:1421
#, c-format
msgid "%s: no database directory specified and environment variable PGDATA unset\n"
msgstr "%s：未指定資料目錄和設定環境變數PGDATA\n"
