<!-- doc/src/sgml/release-8.4.sgml -->
<!-- See header comment in release.sgml about typical markup -->

 <sect1 id="release-8-4-19">
  <title>Release 8.4.19</title>

  <note>
  <title>Release Date</title>
  <simpara>2013-12-05</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.18.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.19</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, this release corrects a potential data corruption
    issue.  See the first changelog entry below to find out whether
    your installation has been affected and what steps you can take if so.
   </para>

   <para>
    Also, if you are upgrading from a version earlier than 8.4.17,
    see <xref linkend="release-8-4-17">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix <command>VACUUM</>'s tests to see whether it can
      update <structfield>relfrozenxid</> (Andres Freund)
     </para>

     <para>
      In some cases <command>VACUUM</> (either manual or autovacuum) could
      incorrectly advance a table's <structfield>relfrozenxid</> value,
      allowing tuples to escape freezing, causing those rows to become
      invisible once 2^31 transactions have elapsed.  The probability of
      data loss is fairly low since multiple incorrect advancements would
      need to happen before actual loss occurs, but it's not zero.  Users
      upgrading from release 8.4.8 or earlier are not affected, but all later
      versions contain the bug.
     </para>

     <para>
      The issue can be ameliorated by, after upgrading, vacuuming all tables
      in all databases while having <link
      linkend="guc-vacuum-freeze-table-age"><varname>vacuum_freeze_table_age</></link>
      set to zero.  This will fix any latent corruption but will not be able
      to fix all pre-existing data errors.  However, an installation can be
      presumed safe after performing this vacuuming if it has executed fewer
      than 2^31 update transactions in its lifetime (check this with
      <literal>SELECT txid_current() < 2^31</>).
     </para>
    </listitem>

    <listitem>
     <para>
      Fix race condition in GIN index posting tree page deletion (Heikki
      Linnakangas)
     </para>

     <para>
      This could lead to transient wrong answers or query failures.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid flattening a subquery whose <literal>SELECT</> list contains a
      volatile function wrapped inside a sub-<literal>SELECT</> (Tom Lane)
     </para>

     <para>
      This avoids unexpected results due to extra evaluations of the
      volatile function.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix planner's processing of non-simple-variable subquery outputs
      nested within outer joins (Tom Lane)
     </para>

     <para>
      This error could lead to incorrect plans for queries involving
      multiple levels of subqueries within <literal>JOIN</> syntax.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix premature deletion of temporary files (Andres Freund)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible read past end of memory in rule printing (Peter Eisentraut)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix array slicing of <type>int2vector</> and <type>oidvector</> values
      (Tom Lane)
     </para>

     <para>
      Expressions of this kind are now implicitly promoted to
      regular <type>int2</> or <type>oid</> arrays.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect behaviors when using a SQL-standard, simple GMT offset
      timezone (Tom Lane)
     </para>

     <para>
      In some cases, the system would use the simple GMT offset value when
      it should have used the regular timezone setting that had prevailed
      before the simple offset was selected.  This change also causes
      the <function>timeofday</> function to honor the simple GMT offset
      zone.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent possible misbehavior when logging translations of Windows
      error codes (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Properly quote generated command lines in <application>pg_ctl</>
      (Naoya Anzai and Tom Lane)
     </para>

     <para>
      This fix applies only to Windows.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_dumpall</> to work when a source database
      sets <link
      linkend="guc-default-transaction-read-only"><varname>default_transaction_read_only</></link>
      via <command>ALTER DATABASE SET</> (Kevin Grittner)
     </para>

     <para>
      Previously, the generated script would fail during restore.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>ecpg</>'s processing of lists of variables
      declared <type>varchar</> (Zolt&aacute;n B&ouml;sz&ouml;rm&eacute;nyi)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <filename>contrib/lo</> defend against incorrect trigger definitions
      (Marc Cousin)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2013h
      for DST law changes in Argentina, Brazil, Jordan, Libya,
      Liechtenstein, Morocco, and Palestine.  Also, new timezone
      abbreviations WIB, WIT, WITA for Indonesia.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-18">
  <title>Release 8.4.18</title>

  <note>
  <title>Release Date</title>
  <simpara>2013-10-10</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.17.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.18</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.17,
    see <xref linkend="release-8-4-17">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Prevent corruption of multi-byte characters when attempting to
      case-fold identifiers (Andrew Dunstan)
     </para>

     <para>
      <productname>PostgreSQL</> case-folds non-ASCII characters only
      when using a single-byte server encoding.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak caused by <function>lo_open()</function> failure
      (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory overcommit bug when <varname>work_mem</> is using more
      than 24GB of memory (Stephen Frost)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix deadlock bug in libpq when using SSL (Stephen Frost)
     </para>
    </listitem>

    <listitem>
     <para>
      Properly compute row estimates for boolean columns containing many NULL
      values (Andrew Gierth)
     </para>

     <para>
      Previously tests like <literal>col IS NOT TRUE</> and <literal>col IS
      NOT FALSE</> did not properly factor in NULL values when estimating
      plan costs.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent pushing down <literal>WHERE</> clauses into unsafe
      <literal>UNION/INTERSECT</> subqueries (Tom Lane)
     </para>

     <para>
      Subqueries of a <literal>UNION</> or <literal>INTERSECT</> that
      contain set-returning functions or volatile functions in their
      <literal>SELECT</> lists could be improperly optimized, leading to
      run-time errors or incorrect query results.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix rare case of <quote>failed to locate grouping columns</>
      planner failure (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve view dumping code's handling of dropped columns in referenced
      tables (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible deadlock during concurrent <command>CREATE INDEX
      CONCURRENTLY</> operations (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>regexp_matches()</> handling of zero-length matches
      (Jeevan Chalke)
     </para>

     <para>
      Previously, zero-length matches like '^' could return too many matches.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix crash for overly-complex regular expressions (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix regular expression match failures for back references combined with
      non-greedy quantifiers (Jeevan Chalke)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent <command>CREATE FUNCTION</> from checking <command>SET</>
      variables unless function body checking is enabled (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>pgp_pub_decrypt()</> so it works for secret keys with
      passwords (Marko Kreen)
     </para>
    </listitem>

    <listitem>
     <para>
      Remove rare inaccurate warning during vacuum of index-less tables
      (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid possible failure when performing transaction control commands (e.g
      <command>ROLLBACK</>) in prepared queries (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that floating-point data input accepts standard spellings
      of <quote>infinity</> on all platforms (Tom Lane)
     </para>

     <para>
      The C99 standard says that allowable spellings are <literal>inf</>,
      <literal>+inf</>, <literal>-inf</>, <literal>infinity</>,
      <literal>+infinity</>, and <literal>-infinity</>.  Make sure we
      recognize these even if the platform's <function>strtod</> function
      doesn't.
     </para>
    </listitem>

    <listitem>
     <para>
      Expand ability to compare rows to records and arrays (Rafal Rzepecki,
      Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2013d
      for DST law changes in Israel, Morocco, Palestine, and Paraguay.
      Also, historical zone data corrections for Macquarie Island.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-17">
  <title>Release 8.4.17</title>

  <note>
  <title>Release Date</title>
  <simpara>2013-04-04</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.16.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.17</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, this release corrects several errors in management of GiST
    indexes.  After installing this update, it is advisable to
    <command>REINDEX</> any GiST indexes that meet one or more of the
    conditions described below.
   </para>

   <para>
    Also, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Reset OpenSSL randomness state in each postmaster child process
      (Marko Kreen)
     </para>

     <para>
      This avoids a scenario wherein random numbers generated by
      <filename>contrib/pgcrypto</> functions might be relatively easy for
      another database user to guess.  The risk is only significant when
      the postmaster is configured with <varname>ssl</> = <literal>on</>
      but most connections don't use SSL encryption.  (CVE-2013-1900)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix GiST indexes to not use <quote>fuzzy</> geometric comparisons when
      it's not appropriate to do so (Alexander Korotkov)
     </para>

     <para>
      The core geometric types perform comparisons using <quote>fuzzy</>
      equality, but <function>gist_box_same</> must do exact comparisons,
      else GiST indexes using it might become inconsistent.  After installing
      this update, users should <command>REINDEX</> any GiST indexes on
      <type>box</>, <type>polygon</>, <type>circle</>, or <type>point</>
      columns, since all of these use <function>gist_box_same</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix erroneous range-union and penalty logic in GiST indexes that use
      <filename>contrib/btree_gist</> for variable-width data types, that is
      <type>text</>, <type>bytea</>, <type>bit</>, and <type>numeric</>
      columns (Tom Lane)
     </para>

     <para>
      These errors could result in inconsistent indexes in which some keys
      that are present would not be found by searches, and also in useless
      index bloat.  Users are advised to <command>REINDEX</> such indexes
      after installing this update.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bugs in GiST page splitting code for multi-column indexes
      (Tom Lane)
     </para>

     <para>
      These errors could result in inconsistent indexes in which some keys
      that are present would not be found by searches, and also in indexes
      that are unnecessarily inefficient to search.  Users are advised to
      <command>REINDEX</> multi-column GiST indexes after installing this
      update.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix infinite-loop risk in regular expression compilation (Tom Lane,
      Don Porter)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix potential null-pointer dereference in regular expression compilation
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>to_char()</> to use ASCII-only case-folding rules where
      appropriate (Tom Lane)
     </para>

     <para>
      This fixes misbehavior of some template patterns that should be
      locale-independent, but mishandled <quote><literal>I</></quote> and
      <quote><literal>i</></quote> in Turkish locales.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix unwanted rejection of timestamp <literal>1999-12-31 24:00:00</>
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Remove useless <quote>picksplit doesn't support secondary split</> log
      messages (Josh Hansen, Tom Lane)
     </para>

     <para>
      This message seems to have been added in expectation of code that was
      never written, and probably never will be, since GiST's default
      handling of secondary splits is actually pretty good.  So stop nagging
      end users about it.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible failure to send a session's last few transaction
      commit/abort counts to the statistics collector (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Eliminate memory leaks in PL/Perl's <function>spi_prepare()</> function
      (Alex Hunsaker, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_dumpall</> to handle database names containing
      <quote><literal>=</></quote> correctly (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid crash in <application>pg_dump</> when an incorrect connection
      string is given (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Ignore invalid indexes in <application>pg_dump</> (Michael Paquier)
     </para>

     <para>
      Dumping invalid indexes can cause problems at restore time, for example
      if the reason the index creation failed was because it tried to enforce
      a uniqueness condition not satisfied by the table's data.  Also, if the
      index creation is in fact still in progress, it seems reasonable to
      consider it to be an uncommitted DDL change, which
      <application>pg_dump</> wouldn't be expected to dump anyway.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <filename>contrib/pg_trgm</>'s <function>similarity()</> function
      to return zero for trigram-less strings (Tom Lane)
     </para>

     <para>
      Previously it returned <literal>NaN</> due to internal division by zero.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2013b
      for DST law changes in Chile, Haiti, Morocco, Paraguay, and some
      Russian areas.  Also, historical zone data corrections for numerous
      places.
     </para>

     <para>
      Also, update the time zone abbreviation files for recent changes in
      Russia and elsewhere: <literal>CHOT</>, <literal>GET</>,
      <literal>IRKT</>, <literal>KGT</>, <literal>KRAT</>, <literal>MAGT</>,
      <literal>MAWT</>, <literal>MSK</>, <literal>NOVT</>, <literal>OMST</>,
      <literal>TKT</>, <literal>VLAT</>, <literal>WST</>, <literal>YAKT</>,
      <literal>YEKT</> now follow their current meanings, and
      <literal>VOLT</> (Europe/Volgograd) and <literal>MIST</>
      (Antarctica/Macquarie) are added to the default abbreviations list.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-16">
  <title>Release 8.4.16</title>

  <note>
  <title>Release Date</title>
  <simpara>2013-02-07</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.15.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.16</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Prevent execution of <function>enum_recv</> from SQL (Tom Lane)
     </para>

     <para>
      The function was misdeclared, allowing a simple SQL command to crash the
      server.  In principle an attacker might be able to use it to examine the
      contents of server memory.  Our thanks to Sumit Soni (via Secunia SVCRP)
      for reporting this issue.  (CVE-2013-0255)
     </para>
    </listitem>

    <listitem>
     <para>
      Update minimum recovery point when truncating a relation file (Heikki
      Linnakangas)
     </para>

     <para>
      Once data has been discarded, it's no longer safe to stop recovery at
      an earlier point in the timeline.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix SQL grammar to allow subscripting or field selection from a
      sub-SELECT result (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Protect against race conditions when scanning
      <structname>pg_tablespace</> (Stephen Frost, Tom Lane)
     </para>

     <para>
      <command>CREATE DATABASE</> and <command>DROP DATABASE</> could
      misbehave if there were concurrent updates of
      <structname>pg_tablespace</> entries.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent <command>DROP OWNED</> from trying to drop whole databases or
      tablespaces (&Aacute;lvaro Herrera)
     </para>

     <para>
      For safety, ownership of these objects must be reassigned, not dropped.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix error in <link
      linkend="guc-vacuum-freeze-table-age"><varname>vacuum_freeze_table_age</></link>
      implementation (Andres Freund)
     </para>

     <para>
      In installations that have existed for more than <link
      linkend="guc-vacuum-freeze-min-age"><varname>vacuum_freeze_min_age</></link>
      transactions, this mistake prevented autovacuum from using partial-table
      scans, so that a full-table scan would always happen instead.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent misbehavior when a <symbol>RowExpr</> or <symbol>XmlExpr</>
      is parse-analyzed twice (Andres Freund, Tom Lane)
     </para>

     <para>
      This mistake could be user-visible in contexts such as
      <literal>CREATE TABLE LIKE INCLUDING INDEXES</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve defenses against integer overflow in hashtable sizing
      calculations (Jeff Davis)
     </para>
    </listitem>

    <listitem>
     <para>
      Reject out-of-range dates in <function>to_date()</> (Hitoshi Harada)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that non-ASCII prompt strings are translated to the correct
      code page on Windows (Alexander Law, Noah Misch)
     </para>

     <para>
      This bug affected <application>psql</> and some other client programs.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash in <application>psql</>'s <command>\?</> command
      when not connected to a database (Meng Qingzhong)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix one-byte buffer overrun in <application>libpq</>'s
      <function>PQprintTuples</> (Xi Wang)
     </para>

     <para>
      This ancient function is not used anywhere by
      <productname>PostgreSQL</> itself, but it might still be used by some
      client code.
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>ecpglib</> use translated messages properly
      (Chen Huajun)
     </para>
    </listitem>

    <listitem>
     <para>
      Properly install <application>ecpg_compat</> and
      <application>pgtypes</> libraries on MSVC (Jiang Guiqing)
     </para>
    </listitem>

    <listitem>
     <para>
      Rearrange configure's tests for supplied functions so it is not
      fooled by bogus exports from libedit/libreadline (Christoph Berg)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure Windows build number increases over time (Magnus Hagander)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>pgxs</> build executables with the right
      <literal>.exe</> suffix when cross-compiling for Windows
      (Zoltan Boszormenyi)
     </para>
    </listitem>

    <listitem>
     <para>
      Add new timezone abbreviation <literal>FET</> (Tom Lane)
     </para>

     <para>
      This is now used in some eastern-European time zones.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-15">
  <title>Release 8.4.15</title>

  <note>
  <title>Release Date</title>
  <simpara>2012-12-06</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.14.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.15</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix multiple bugs associated with <command>CREATE INDEX
      CONCURRENTLY</> (Andres Freund, Tom Lane)
     </para>

     <para>
      Fix <command>CREATE INDEX CONCURRENTLY</> to use
      in-place updates when changing the state of an index's
      <structname>pg_index</> row.  This prevents race conditions that could
      cause concurrent sessions to miss updating the target index, thus
      resulting in corrupt concurrently-created indexes.
     </para>

     <para>
      Also, fix various other operations to ensure that they ignore
      invalid indexes resulting from a failed <command>CREATE INDEX
      CONCURRENTLY</> command.  The most important of these is
      <command>VACUUM</>, because an auto-vacuum could easily be launched
      on the table before corrective action can be taken to fix or remove
      the invalid index.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid corruption of internal hash tables when out of memory
      (Hitoshi Harada)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix planning of non-strict equivalence clauses above outer joins
      (Tom Lane)
     </para>

     <para>
      The planner could derive incorrect constraints from a clause equating
      a non-strict construct to something else, for example
      <literal>WHERE COALESCE(foo, 0) = 0</>
      when <literal>foo</> is coming from the nullable side of an outer join.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve planner's ability to prove exclusion constraints from
      equivalence classes (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix partial-row matching in hashed subplans to handle cross-type cases
      correctly (Tom Lane)
     </para>

     <para>
      This affects multicolumn <literal>NOT IN</> subplans, such as
      <literal>WHERE (a, b) NOT IN (SELECT x, y FROM ...)</>
      when for instance <literal>b</> and <literal>y</> are <type>int4</>
      and <type>int8</> respectively.  This mistake led to wrong answers
      or crashes depending on the specific datatypes involved.
     </para>
    </listitem>

    <listitem>
     <para>
      Acquire buffer lock when re-fetching the old tuple for an
      <literal>AFTER ROW UPDATE/DELETE</> trigger (Andres Freund)
     </para>

     <para>
      In very unusual circumstances, this oversight could result in passing
      incorrect data to the precheck logic for a foreign-key enforcement
      trigger.  That could result in a crash, or in an incorrect decision
      about whether to fire the trigger.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>ALTER COLUMN TYPE</> to handle inherited check
      constraints properly (Pavan Deolasee)
     </para>

     <para>
      This worked correctly in pre-8.4 releases, and now works correctly
      in 8.4 and later.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>REASSIGN OWNED</> to handle grants on tablespaces
      (&Aacute;lvaro Herrera)
     </para>
    </listitem>

    <listitem>
     <para>
      Ignore incorrect <structname>pg_attribute</> entries for system
      columns for views (Tom Lane)
     </para>

     <para>
      Views do not have any system columns.  However, we forgot to
      remove such entries when converting a table to a view.  That's fixed
      properly for 9.3 and later, but in previous branches we need to defend
      against existing mis-converted views.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix rule printing to dump <literal>INSERT INTO <replaceable>table</>
      DEFAULT VALUES</literal> correctly (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Guard against stack overflow when there are too many
      <literal>UNION</>/<literal>INTERSECT</>/<literal>EXCEPT</> clauses
      in a query (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent platform-dependent failures when dividing the minimum possible
      integer value by -1 (Xi Wang, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible access past end of string in date parsing
      (Hitoshi Harada)
     </para>
    </listitem>

    <listitem>
     <para>
      Produce an understandable error message if the length of the path name
      for a Unix-domain socket exceeds the platform-specific limit
      (Tom Lane, Andrew Dunstan)
     </para>

     <para>
      Formerly, this would result in something quite unhelpful, such as
      <quote>Non-recoverable failure in name resolution</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leaks when sending composite column values to the client
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>pg_ctl</> more robust about reading the
      <filename>postmaster.pid</> file (Heikki Linnakangas)
     </para>

     <para>
      Fix race conditions and possible file descriptor leakage.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash in <application>psql</> if incorrectly-encoded data
      is presented and the <varname>client_encoding</> setting is a
      client-only encoding, such as SJIS (Jiang Guiqing)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bugs in the <filename>restore.sql</> script emitted by
      <application>pg_dump</> in <literal>tar</> output format (Tom Lane)
     </para>

     <para>
      The script would fail outright on tables whose names include
      upper-case characters.  Also, make the script capable of restoring
      data in <option>--inserts</> mode as well as the regular COPY mode.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_restore</> to accept POSIX-conformant
      <literal>tar</> files (Brian Weaver, Tom Lane)
     </para>

     <para>
      The original coding of <application>pg_dump</>'s <literal>tar</>
      output mode produced files that are not fully conformant with the
      POSIX standard.  This has been corrected for version 9.3.  This
      patch updates previous branches so that they will accept both the
      incorrect and the corrected formats, in hopes of avoiding
      compatibility problems when 9.3 comes out.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_resetxlog</> to locate <filename>postmaster.pid</>
      correctly when given a relative path to the data directory (Tom Lane)
     </para>

     <para>
      This mistake could lead to <application>pg_resetxlog</> not noticing
      that there is an active postmaster using the data directory.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>libpq</>'s <function>lo_import()</> and
      <function>lo_export()</> functions to report file I/O errors properly
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>ecpg</>'s processing of nested structure pointer
      variables (Muhammad Usama)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <filename>contrib/pageinspect</>'s btree page inspection
      functions take buffer locks while examining pages (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pgxs</> support for building loadable modules on AIX
      (Tom Lane)
     </para>

     <para>
      Building modules outside the original source tree didn't work on AIX.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2012j
      for DST law changes in Cuba, Israel, Jordan, Libya, Palestine, Western
      Samoa, and portions of Brazil.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-14">
  <title>Release 8.4.14</title>

  <note>
  <title>Release Date</title>
  <simpara>2012-09-24</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.13.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.14</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix planner's assignment of executor parameters, and fix executor's
      rescan logic for CTE plan nodes (Tom Lane)
     </para>

     <para>
      These errors could result in wrong answers from queries that scan the
      same <literal>WITH</> subquery multiple times.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve page-splitting decisions in GiST indexes (Alexander Korotkov,
      Robert Haas, Tom Lane)
     </para>

     <para>
      Multi-column GiST indexes might suffer unexpected bloat due to this
      error.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix cascading privilege revoke to stop if privileges are still held
      (Tom Lane)
     </para>

     <para>
      If we revoke a grant option from some role <replaceable>X</>, but
      <replaceable>X</> still holds that option via a grant from someone
      else, we should not recursively revoke the corresponding privilege
      from role(s) <replaceable>Y</> that <replaceable>X</> had granted it
      to.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix handling of <literal>SIGFPE</> when PL/Perl is in use (Andres Freund)
     </para>

     <para>
      Perl resets the process's <literal>SIGFPE</> handler to
      <literal>SIG_IGN</>, which could result in crashes later on.  Restore
      the normal Postgres signal handler after initializing PL/Perl.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent PL/Perl from crashing if a recursive PL/Perl function is
      redefined while being executed (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Work around possible misoptimization in PL/Perl (Tom Lane)
     </para>

     <para>
      Some Linux distributions contain an incorrect version of
      <filename>pthread.h</> that results in incorrect compiled code in
      PL/Perl, leading to crashes if a PL/Perl function calls another one
      that throws an error.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2012f
      for DST law changes in Fiji
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-13">
  <title>Release 8.4.13</title>

  <note>
  <title>Release Date</title>
  <simpara>2012-08-17</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.12.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.13</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Prevent access to external files/URLs via XML entity references
      (Noah Misch, Tom Lane)
     </para>

     <para>
      <function>xml_parse()</> would attempt to fetch external files or
      URLs as needed to resolve DTD and entity references in an XML value,
      thus allowing unprivileged database users to attempt to fetch data
      with the privileges of the database server.  While the external data
      wouldn't get returned directly to the user, portions of it could be
      exposed in error messages if the data didn't parse as valid XML; and
      in any case the mere ability to check existence of a file might be
      useful to an attacker.  (CVE-2012-3489)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent access to external files/URLs via <filename>contrib/xml2</>'s
      <function>xslt_process()</> (Peter Eisentraut)
     </para>

     <para>
      <application>libxslt</> offers the ability to read and write both
      files and URLs through stylesheet commands, thus allowing
      unprivileged database users to both read and write data with the
      privileges of the database server.  Disable that through proper use
      of <application>libxslt</>'s security options.  (CVE-2012-3488)
     </para>

     <para>
      Also, remove <function>xslt_process()</>'s ability to fetch documents
      and stylesheets from external files/URLs.  While this was a
      documented <quote>feature</>, it was long regarded as a bad idea.
      The fix for CVE-2012-3489 broke that capability, and rather than
      expend effort on trying to fix it, we're just going to summarily
      remove it.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent too-early recycling of btree index pages (Noah Misch)
     </para>

     <para>
      When we allowed read-only transactions to skip assigning XIDs, we
      introduced the possibility that a deleted btree page could be
      recycled while a read-only transaction was still in flight to it.
      This would result in incorrect index search results.  The probability
      of such an error occurring in the field seems very low because of the
      timing requirements, but nonetheless it should be fixed.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix crash-safety bug with newly-created-or-reset sequences (Tom Lane)
     </para>

     <para>
      If <command>ALTER SEQUENCE</> was executed on a freshly created or
      reset sequence, and then precisely one <function>nextval()</> call
      was made on it, and then the server crashed, WAL replay would restore
      the sequence to a state in which it appeared that no
      <function>nextval()</> had been done, thus allowing the first
      sequence value to be returned again by the next
      <function>nextval()</> call.  In particular this could manifest for
      <type>serial</> columns, since creation of a serial column's sequence
      includes an <command>ALTER SEQUENCE OWNED BY</> step.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure the <filename>backup_label</> file is fsync'd after
      <function>pg_start_backup()</> (Dave Kerr)
     </para>
    </listitem>

    <listitem>
     <para>
      Back-patch 9.1 improvement to compress the fsync request queue
      (Robert Haas)
     </para>

     <para>
      This improves performance during checkpoints.  The 9.1 change
      has now seen enough field testing to seem safe to back-patch.
     </para>
    </listitem>

    <listitem>
     <para>
      Only allow autovacuum to be auto-canceled by a directly blocked
      process (Tom Lane)
     </para>

     <para>
      The original coding could allow inconsistent behavior in some cases;
      in particular, an autovacuum could get canceled after less than
      <literal>deadlock_timeout</> grace period.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve logging of autovacuum cancels (Robert Haas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix log collector so that <literal>log_truncate_on_rotation</> works
      during the very first log rotation after server start (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <literal>WITH</> attached to a nested set operation
      (<literal>UNION</>/<literal>INTERSECT</>/<literal>EXCEPT</>)
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that a whole-row reference to a subquery doesn't include any
      extra <literal>GROUP BY</> or <literal>ORDER BY</> columns (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow copying whole-row references in <literal>CHECK</>
      constraints and index definitions during <command>CREATE TABLE</>
      (Tom Lane)
     </para>

     <para>
      This situation can arise in <command>CREATE TABLE</> with
      <literal>LIKE</> or <literal>INHERITS</>.  The copied whole-row
      variable was incorrectly labeled with the row type of the original
      table not the new one.  Rejecting the case seems reasonable for
      <literal>LIKE</>, since the row types might well diverge later.  For
      <literal>INHERITS</> we should ideally allow it, with an implicit
      coercion to the parent table's row type; but that will require more
      work than seems safe to back-patch.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in <literal>ARRAY(SELECT ...)</> subqueries (Heikki
      Linnakangas, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix extraction of common prefixes from regular expressions (Tom Lane)
     </para>

     <para>
      The code could get confused by quantified parenthesized
      subexpressions, such as <literal>^(foo)?bar</>.  This would lead to
      incorrect index optimization of searches for such patterns.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bugs with parsing signed
      <replaceable>hh</><literal>:</><replaceable>mm</> and
      <replaceable>hh</><literal>:</><replaceable>mm</><literal>:</><replaceable>ss</>
      fields in <type>interval</> constants (Amit Kapila, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Report errors properly in <filename>contrib/xml2</>'s
      <function>xslt_process()</> (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2012e
      for DST law changes in Morocco and Tokelau
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-12">
  <title>Release 8.4.12</title>

  <note>
  <title>Release Date</title>
  <simpara>2012-06-04</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.11.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.12</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix incorrect password transformation in
      <filename>contrib/pgcrypto</>'s DES <function>crypt()</> function
      (Solar Designer)
     </para>

     <para>
      If a password string contained the byte value <literal>0x80</>, the
      remainder of the password was ignored, causing the password to be much
      weaker than it appeared.  With this fix, the rest of the string is
      properly included in the DES hash.  Any stored password values that are
      affected by this bug will thus no longer match, so the stored values may
      need to be updated.  (CVE-2012-2143)
     </para>
    </listitem>

    <listitem>
     <para>
      Ignore <literal>SECURITY DEFINER</> and <literal>SET</> attributes for
      a procedural language's call handler (Tom Lane)
     </para>

     <para>
      Applying such attributes to a call handler could crash the server.
      (CVE-2012-2655)
     </para>
    </listitem>

    <listitem>
     <para>
      Allow numeric timezone offsets in <type>timestamp</> input to be up to
      16 hours away from UTC (Tom Lane)
     </para>

     <para>
      Some historical time zones have offsets larger than 15 hours, the
      previous limit.  This could result in dumped data values being rejected
      during reload.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix timestamp conversion to cope when the given time is exactly the
      last DST transition time for the current timezone (Tom Lane)
     </para>

     <para>
      This oversight has been there a long time, but was not noticed
      previously because most DST-using zones are presumed to have an
      indefinite sequence of future DST transitions.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <type>text</> to <type>name</> and <type>char</> to <type>name</>
      casts to perform string truncation correctly in multibyte encodings
      (Karl Schnaitter)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory copying bug in <function>to_tsquery()</> (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix planner's handling of outer PlaceHolderVars within subqueries (Tom
      Lane)
     </para>

     <para>
      This bug concerns sub-SELECTs that reference variables coming from the
      nullable side of an outer join of the surrounding query.
      In 9.1, queries affected by this bug would fail with <quote>ERROR:
      Upper-level PlaceHolderVar found where not expected</>.  But in 9.0 and
      8.4, you'd silently get possibly-wrong answers, since the value
      transmitted into the subquery wouldn't go to null when it should.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix slow session startup when <structname>pg_attribute</> is very large
      (Tom Lane)
     </para>

     <para>
      If <structname>pg_attribute</> exceeds one-fourth of
      <varname>shared_buffers</>, cache rebuilding code that is sometimes
      needed during session start would trigger the synchronized-scan logic,
      causing it to take many times longer than normal.  The problem was
      particularly acute if many new sessions were starting at once.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure sequential scans check for query cancel reasonably often (Merlin
      Moncure)
     </para>

     <para>
      A scan encountering many consecutive pages that contain no live tuples
      would not respond to interrupts meanwhile.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure the Windows implementation of <function>PGSemaphoreLock()</>
      clears <varname>ImmediateInterruptOK</> before returning (Tom Lane)
     </para>

     <para>
      This oversight meant that a query-cancel interrupt received later
      in the same query could be accepted at an unsafe time, with
      unpredictable but not good consequences.
     </para>
    </listitem>

    <listitem>
     <para>
      Show whole-row variables safely when printing views or rules
      (Abbas Butt, Tom Lane)
     </para>

     <para>
      Corner cases involving ambiguous names (that is, the name could be
      either a table or column name of the query) were printed in an
      ambiguous way, risking that the view or rule would be interpreted
      differently after dump and reload.  Avoid the ambiguous case by
      attaching a no-op cast.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>COPY FROM</> to properly handle null marker strings that
      correspond to invalid encoding (Tom Lane)
     </para>

     <para>
      A null marker string such as <literal>E'\\0'</> should work, and did
      work in the past, but the case got broken in 8.4.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure autovacuum worker processes perform stack depth checking
      properly (Heikki Linnakangas)
     </para>

     <para>
      Previously, infinite recursion in a function invoked by
      auto-<command>ANALYZE</> could crash worker processes.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix logging collector to not lose log coherency under high load (Andrew
      Dunstan)
     </para>

     <para>
      The collector previously could fail to reassemble large messages if it
      got too busy.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix logging collector to ensure it will restart file rotation
      after receiving <systemitem>SIGHUP</> (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix WAL replay logic for GIN indexes to not fail if the index was
      subsequently dropped (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in PL/pgSQL's <command>RETURN NEXT</> command (Joe
      Conway)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix PL/pgSQL's <command>GET DIAGNOSTICS</> command when the target
      is the function's first variable (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix potential access off the end of memory in <application>psql</>'s
      expanded display (<command>\x</>) mode (Peter Eisentraut)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix several performance problems in <application>pg_dump</> when
      the database contains many objects (Jeff Janes, Tom Lane)
     </para>

     <para>
      <application>pg_dump</> could get very slow if the database contained
      many schemas, or if many objects are in dependency loops, or if there
      are many owned sequences.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <filename>contrib/dblink</>'s <function>dblink_exec()</> to not leak
      temporary database connections upon error (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <filename>contrib/dblink</> to report the correct connection name in
      error messages (Kyotaro Horiguchi)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2012c
      for DST law changes in Antarctica, Armenia, Chile, Cuba, Falkland
      Islands, Gaza, Haiti, Hebron, Morocco, Syria, and Tokelau Islands;
      also historical corrections for Canada.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-11">
  <title>Release 8.4.11</title>

  <note>
  <title>Release Date</title>
  <simpara>2012-02-27</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.10.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.11</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.10,
    see <xref linkend="release-8-4-10">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Require execute permission on the trigger function for
      <command>CREATE TRIGGER</> (Robert Haas)
     </para>

     <para>
      This missing check could allow another user to execute a trigger
      function with forged input data, by installing it on a table he owns.
      This is only of significance for trigger functions marked
      <literal>SECURITY DEFINER</>, since otherwise trigger functions run
      as the table owner anyway.  (CVE-2012-0866)
     </para>
    </listitem>

    <listitem>
     <para>
      Remove arbitrary limitation on length of common name in SSL
      certificates (Heikki Linnakangas)
     </para>

     <para>
      Both <application>libpq</> and the server truncated the common name
      extracted from an SSL certificate at 32 bytes.  Normally this would
      cause nothing worse than an unexpected verification failure, but there
      are some rather-implausible scenarios in which it might allow one
      certificate holder to impersonate another.  The victim would have to
      have a common name exactly 32 bytes long, and the attacker would have
      to persuade a trusted CA to issue a certificate in which the common
      name has that string as a prefix.  Impersonating a server would also
      require some additional exploit to redirect client connections.
      (CVE-2012-0867)
     </para>
    </listitem>

    <listitem>
     <para>
      Convert newlines to spaces in names written in <application>pg_dump</>
      comments (Robert Haas)
     </para>

     <para>
      <application>pg_dump</> was incautious about sanitizing object names
      that are emitted within SQL comments in its output script.  A name
      containing a newline would at least render the script syntactically
      incorrect.  Maliciously crafted object names could present a SQL
      injection risk when the script is reloaded.  (CVE-2012-0868)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix btree index corruption from insertions concurrent with vacuuming
      (Tom Lane)
     </para>

     <para>
      An index page split caused by an insertion could sometimes cause a
      concurrently-running <command>VACUUM</> to miss removing index entries
      that it should remove.  After the corresponding table rows are removed,
      the dangling index entries would cause errors (such as <quote>could not
      read block N in file ...</>) or worse, silently wrong query results
      after unrelated rows are re-inserted at the now-free table locations.
      This bug has been present since release 8.2, but occurs so infrequently
      that it was not diagnosed until now.  If you have reason to suspect
      that it has happened in your database, reindexing the affected index
      will fix things.
     </para>
    </listitem>

    <listitem>
     <para>
      Update per-column permissions, not only per-table permissions, when
      changing table owner (Tom Lane)
     </para>

     <para>
      Failure to do this meant that any previously granted column permissions
      were still shown as having been granted by the old owner.  This meant
      that neither the new owner nor a superuser could revoke the
      now-untraceable-to-table-owner permissions.
     </para>
    </listitem>

    <listitem>
     <para>
      Allow non-existent values for some settings in <command>ALTER
      USER/DATABASE SET</> (Heikki Linnakangas)
     </para>

     <para>
      Allow <varname>default_text_search_config</>,
      <varname>default_tablespace</>, and <varname>temp_tablespaces</> to be
      set to names that are not known.  This is because they might be known
      in another database where the setting is intended to be used, or for the
      tablespace cases because the tablespace might not be created yet.  The
      same issue was previously recognized for <varname>search_path</>, and
      these settings now act like that one.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid crashing when we have problems deleting table files post-commit
      (Tom Lane)
     </para>

     <para>
      Dropping a table should lead to deleting the underlying disk files only
      after the transaction commits.  In event of failure then (for instance,
      because of wrong file permissions) the code is supposed to just emit a
      warning message and go on, since it's too late to abort the
      transaction.  This logic got broken as of release 8.4, causing such
      situations to result in a PANIC and an unrestartable database.
     </para>
    </listitem>

    <listitem>
     <para>
      Track the OID counter correctly during WAL replay, even when it wraps
      around (Tom Lane)
     </para>

     <para>
      Previously the OID counter would remain stuck at a high value until the
      system exited replay mode.  The practical consequences of that are
      usually nil, but there are scenarios wherein a standby server that's
      been promoted to master might take a long time to advance the OID
      counter to a reasonable value once values are needed.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix regular expression back-references with <literal>*</> attached
      (Tom Lane)
     </para>

     <para>
      Rather than enforcing an exact string match, the code would effectively
      accept any string that satisfies the pattern sub-expression referenced
      by the back-reference symbol.
     </para>

     <para>
      A similar problem still afflicts back-references that are embedded in a
      larger quantified expression, rather than being the immediate subject
      of the quantifier.  This will be addressed in a future
      <productname>PostgreSQL</> release.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix recently-introduced memory leak in processing of
      <type>inet</>/<type>cidr</> values (Heikki Linnakangas)
     </para>

     <para>
      A patch in the December 2011 releases of <productname>PostgreSQL</>
      caused memory leakage in these operations, which could be significant
      in scenarios such as building a btree index on such a column.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix dangling pointer after <command>CREATE TABLE AS</>/<command>SELECT
      INTO</> in a SQL-language function (Tom Lane)
     </para>

     <para>
      In most cases this only led to an assertion failure in assert-enabled
      builds, but worse consequences seem possible.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid double close of file handle in syslogger on Windows (MauMau)
     </para>

     <para>
      Ordinarily this error was invisible, but it would cause an exception
      when running on a debug version of Windows.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix I/O-conversion-related memory leaks in plpgsql
      (Andres Freund, Jan Urbanski, Tom Lane)
     </para>

     <para>
      Certain operations would leak memory until the end of the current
      function.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve <application>pg_dump</>'s handling of inherited table columns
      (Tom Lane)
     </para>

     <para>
      <application>pg_dump</> mishandled situations where a child column has
      a different default expression than its parent column.  If the default
      is textually identical to the parent's default, but not actually the
      same (for instance, because of schema search path differences) it would
      not be recognized as different, so that after dump and restore the
      child would be allowed to inherit the parent's default.  Child columns
      that are <literal>NOT NULL</> where their parent is not could also be
      restored subtly incorrectly.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_restore</>'s direct-to-database mode for
      INSERT-style table data (Tom Lane)
     </para>

     <para>
      Direct-to-database restores from archive files made with
      <option>--inserts</> or <option>--column-inserts</> options fail when
      using <application>pg_restore</> from a release dated September or
      December 2011, as a result of an oversight in a fix for another
      problem.  The archive file itself is not at fault, and text-mode
      output is okay.
     </para>
    </listitem>

    <listitem>
     <para>
      Allow <literal>AT</> option in <application>ecpg</>
      <literal>DEALLOCATE</> statements (Michael Meskes)
     </para>

     <para>
      The infrastructure to support this has been there for awhile, but
      through an oversight there was still an error check rejecting the case.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix error in <filename>contrib/intarray</>'s <literal>int[] &amp;
      int[]</> operator (Guillaume Lelarge)
     </para>

     <para>
      If the smallest integer the two input arrays have in common is 1,
      and there are smaller values in either array, then 1 would be
      incorrectly omitted from the result.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix error detection in <filename>contrib/pgcrypto</>'s
      <function>encrypt_iv()</> and <function>decrypt_iv()</>
      (Marko Kreen)
     </para>

     <para>
      These functions failed to report certain types of invalid-input errors,
      and would instead return random garbage values for incorrect input.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix one-byte buffer overrun in <filename>contrib/test_parser</>
      (Paul Guyot)
     </para>

     <para>
      The code would try to read one more byte than it should, which would
      crash in corner cases.
      Since <filename>contrib/test_parser</> is only example code, this is
      not a security issue in itself, but bad example code is still bad.
     </para>
    </listitem>

    <listitem>
     <para>
      Use <function>__sync_lock_test_and_set()</> for spinlocks on ARM, if
      available (Martin Pitt)
     </para>

     <para>
      This function replaces our previous use of the <literal>SWPB</>
      instruction, which is deprecated and not available on ARMv6 and later.
      Reports suggest that the old code doesn't fail in an obvious way on
      recent ARM boards, but simply doesn't interlock concurrent accesses,
      leading to bizarre failures in multiprocess operation.
     </para>
    </listitem>

    <listitem>
     <para>
      Use <option>-fexcess-precision=standard</> option when building with
      gcc versions that accept it (Andrew Dunstan)
     </para>

     <para>
      This prevents assorted scenarios wherein recent versions of gcc will
      produce creative results.
     </para>
    </listitem>

    <listitem>
     <para>
      Allow use of threaded Python on FreeBSD (Chris Rees)
     </para>

     <para>
      Our configure script previously believed that this combination wouldn't
      work; but FreeBSD fixed the problem, so remove that error check.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-10">
  <title>Release 8.4.10</title>

  <note>
  <title>Release Date</title>
  <simpara>2011-12-05</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.9.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.10</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, a longstanding error was discovered in the definition of the
    <literal>information_schema.referential_constraints</> view.  If you
    rely on correct results from that view, you should replace its
    definition as explained in the first changelog item below.
   </para>

   <para>
    Also, if you are upgrading from a version earlier than 8.4.8,
    see <xref linkend="release-8-4-8">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix bugs in <literal>information_schema.referential_constraints</> view
      (Tom Lane)
     </para>

     <para>
      This view was being insufficiently careful about matching the
      foreign-key constraint to the depended-on primary or unique key
      constraint.  That could result in failure to show a foreign key
      constraint at all, or showing it multiple times, or claiming that it
      depends on a different constraint than the one it really does.
     </para>

     <para>
      Since the view definition is installed by <application>initdb</>,
      merely upgrading will not fix the problem.  If you need to fix this
      in an existing installation, you can (as a superuser) drop the
      <literal>information_schema</> schema then re-create it by sourcing
      <filename><replaceable>SHAREDIR</>/information_schema.sql</filename>.
      (Run <literal>pg_config --sharedir</> if you're uncertain where
      <replaceable>SHAREDIR</> is.)  This must be repeated in each database
      to be fixed.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect replay of WAL records for GIN index updates
      (Tom Lane)
     </para>

     <para>
      This could result in transiently failing to find index entries after
      a crash, or on a hot-standby server.  The problem would be repaired
      by the next <command>VACUUM</> of the index, however.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix TOAST-related data corruption during <literal>CREATE TABLE dest AS
      SELECT * FROM src</> or <literal>INSERT INTO dest SELECT * FROM src</>
      (Tom Lane)
     </para>

     <para>
      If a table has been modified by <command>ALTER TABLE ADD COLUMN</>,
      attempts to copy its data verbatim to another table could produce
      corrupt results in certain corner cases.
      The problem can only manifest in this precise form in 8.4 and later,
      but we patched earlier versions as well in case there are other code
      paths that could trigger the same bug.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix race condition during toast table access from stale syscache entries
      (Tom Lane)
     </para>

     <para>
      The typical symptom was transient errors like <quote>missing chunk
      number 0 for toast value NNNNN in pg_toast_2619</>, where the cited
      toast table would always belong to a system catalog.
     </para>
    </listitem>

    <listitem>
     <para>
      Track dependencies of functions on items used in parameter default
      expressions (Tom Lane)
     </para>

     <para>
      Previously, a referenced object could be dropped without having dropped
      or modified the function, leading to misbehavior when the function was
      used.  Note that merely installing this update will not fix the missing
      dependency entries; to do that, you'd need to <command>CREATE OR
      REPLACE</> each such function afterwards.  If you have functions whose
      defaults depend on non-built-in objects, doing so is recommended.
     </para>
    </listitem>

    <listitem>
     <para>
      Allow inlining of set-returning SQL functions with multiple OUT
      parameters (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <function>DatumGetInetP()</> unpack inet datums that have a 1-byte
      header, and add a new macro, <function>DatumGetInetPP()</>, that does
      not (Heikki Linnakangas)
     </para>

     <para>
      This change affects no core code, but might prevent crashes in add-on
      code that expects <function>DatumGetInetP()</> to produce an unpacked
      datum as per usual convention.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve locale support in <type>money</> type's input and output
      (Tom Lane)
     </para>

     <para>
      Aside from not supporting all standard
      <link linkend="guc-lc-monetary"><varname>lc_monetary</></link>
      formatting options, the input and output functions were inconsistent,
      meaning there were locales in which dumped <type>money</> values could
      not be re-read.
     </para>
    </listitem>

    <listitem>
     <para>
      Don't let <link
      linkend="guc-transform-null-equals"><varname>transform_null_equals</></link>
      affect <literal>CASE foo WHEN NULL ...</> constructs
      (Heikki Linnakangas)
     </para>

     <para>
      <varname>transform_null_equals</> is only supposed to affect
      <literal>foo = NULL</> expressions written directly by the user, not
      equality checks generated internally by this form of <literal>CASE</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Change foreign-key trigger creation order to better support
      self-referential foreign keys (Tom Lane)
     </para>

     <para>
      For a cascading foreign key that references its own table, a row update
      will fire both the <literal>ON UPDATE</> trigger and the
      <literal>CHECK</> trigger as one event.  The <literal>ON UPDATE</>
      trigger must execute first, else the <literal>CHECK</> will check a
      non-final state of the row and possibly throw an inappropriate error.
      However, the firing order of these triggers is determined by their
      names, which generally sort in creation order since the triggers have
      auto-generated names following the convention
      <quote>RI_ConstraintTrigger_NNNN</>.  A proper fix would require
      modifying that convention, which we will do in 9.2, but it seems risky
      to change it in existing releases.  So this patch just changes the
      creation order of the triggers.  Users encountering this type of error
      should drop and re-create the foreign key constraint to get its
      triggers into the right order.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid floating-point underflow while tracking buffer allocation rate
      (Greg Matthews)
     </para>

     <para>
      While harmless in itself, on certain platforms this would result in
      annoying kernel log messages.
     </para>
    </listitem>

    <listitem>
     <para>
      Preserve configuration file name and line number values when starting
      child processes under Windows (Tom Lane)
     </para>

     <para>
      Formerly, these would not be displayed correctly in the
      <structname>pg_settings</> view.
     </para>
    </listitem>

    <listitem>
     <para>
      Preserve blank lines within commands in <application>psql</>'s command
      history (Robert Haas)
     </para>

     <para>
      The former behavior could cause problems if an empty line was removed
      from within a string literal, for example.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_dump</> to dump user-defined casts between
      auto-generated types, such as table rowtypes (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Use the preferred version of <application>xsubpp</> to build PL/Perl,
      not necessarily the operating system's main copy
      (David Wheeler and Alex Hunsaker)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect coding in <filename>contrib/dict_int</> and
      <filename>contrib/dict_xsyn</> (Tom Lane)
     </para>

     <para>
      Some functions incorrectly assumed that memory returned by
      <function>palloc()</> is guaranteed zeroed.
     </para>
    </listitem>

    <listitem>
     <para>
      Honor query cancel interrupts promptly in <function>pgstatindex()</>
      (Robert Haas)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure VPATH builds properly install all server header files
      (Peter Eisentraut)
     </para>
    </listitem>

    <listitem>
     <para>
      Shorten file names reported in verbose error messages (Peter Eisentraut)
     </para>

     <para>
      Regular builds have always reported just the name of the C file
      containing the error message call, but VPATH builds formerly
      reported an absolute path name.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix interpretation of Windows timezone names for Central America
      (Tom Lane)
     </para>

     <para>
      Map <quote>Central America Standard Time</> to <literal>CST6</>, not
      <literal>CST6CDT</>, because DST is generally not observed anywhere in
      Central America.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2011n
      for DST law changes in Brazil, Cuba, Fiji, Palestine, Russia, and Samoa;
      also historical corrections for Alaska and British East Africa.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-9">
  <title>Release 8.4.9</title>

  <note>
  <title>Release Date</title>
  <simpara>2011-09-26</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.8.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.9</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if you are upgrading from a version earlier than 8.4.8,
    see <xref linkend="release-8-4-8">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix bugs in indexing of in-doubt HOT-updated tuples (Tom Lane)
     </para>

     <para>
      These bugs could result in index corruption after reindexing a system
      catalog.  They are not believed to affect user indexes.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix multiple bugs in GiST index page split processing (Heikki
      Linnakangas)
     </para>

     <para>
      The probability of occurrence was low, but these could lead to index
      corruption.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible buffer overrun in <function>tsvector_concat()</>
      (Tom Lane)
     </para>

     <para>
      The function could underestimate the amount of memory needed for its
      result, leading to server crashes.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix crash in <function>xml_recv</> when processing a
      <quote>standalone</> parameter (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <function>pg_options_to_table</> return NULL for an option with no
      value (Tom Lane)
     </para>

     <para>
      Previously such cases would result in a server crash.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid possibly accessing off the end of memory in <command>ANALYZE</>
      and in SJIS-2004 encoding conversion (Noah Misch)
     </para>

     <para>
      This fixes some very-low-probability server crash scenarios.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent intermittent hang in interactions of startup process with
      bgwriter process (Simon Riggs)
     </para>

     <para>
      This affected recovery in non-hot-standby cases.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix race condition in relcache init file invalidation (Tom Lane)
     </para>

     <para>
      There was a window wherein a new backend process could read a stale init
      file but miss the inval messages that would tell it the data is stale.
      The result would be bizarre failures in catalog accesses, typically
      <quote>could not read block 0 in file ...</> later during startup.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak at end of a GiST index scan (Tom Lane)
     </para>

     <para>
      Commands that perform many separate GiST index scans, such as
      verification of a new GiST-based exclusion constraint on a table
      already containing many rows, could transiently require large amounts of
      memory due to this leak.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect memory accounting (leading to possible memory bloat) in
      tuplestores supporting holdable cursors and plpgsql's <literal>RETURN
      NEXT</> command (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix performance problem when constructing a large, lossy bitmap
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix join selectivity estimation for unique columns (Tom Lane)
     </para>

     <para>
      This fixes an erroneous planner heuristic that could lead to poor
      estimates of the result size of a join.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix nested PlaceHolderVar expressions that appear only in sub-select
      target lists (Tom Lane)
     </para>

     <para>
      This mistake could result in outputs of an outer join incorrectly
      appearing as NULL.
     </para>
    </listitem>

    <listitem>
     <para>
      Allow nested <literal>EXISTS</> queries to be optimized properly (Tom
      Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix array- and path-creating functions to ensure padding bytes are
      zeroes (Tom Lane)
     </para>

     <para>
      This avoids some situations where the planner will think that
      semantically-equal constants are not equal, resulting in poor
      optimization.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>EXPLAIN</> to handle gating Result nodes within
      inner-indexscan subplans (Tom Lane)
     </para>

     <para>
      The usual symptom of this oversight was <quote>bogus varno</> errors.
     </para>
    </listitem>

    <listitem>
     <para>
      Work around gcc 4.6.0 bug that breaks WAL replay (Tom Lane)
     </para>

     <para>
      This could lead to loss of committed transactions after a server crash.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix dump bug for <literal>VALUES</> in a view (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow <literal>SELECT FOR UPDATE/SHARE</> on sequences (Tom Lane)
     </para>

     <para>
      This operation doesn't work as expected and can lead to failures.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>VACUUM</> so that it always updates
      <literal>pg_class</>.<literal>reltuples</>/<literal>relpages</> (Tom
      Lane)
     </para>

     <para>
      This fixes some scenarios where autovacuum could make increasingly poor
      decisions about when to vacuum tables.
     </para>
    </listitem>

    <listitem>
     <para>
      Defend against integer overflow when computing size of a hash table (Tom
      Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix cases where <command>CLUSTER</> might attempt to access
      already-removed TOAST data (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix portability bugs in use of credentials control messages for
      <quote>peer</> authentication (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix SSPI login when multiple roundtrips are required (Ahmed Shinwari,
      Magnus Hagander)
     </para>

     <para>
      The typical symptom of this problem was <quote>The function requested is
      not supported</> errors during SSPI login.
     </para>
    </listitem>

    <listitem>
     <para>
      Throw an error if <filename>pg_hba.conf</> contains <literal>hostssl</>
      but SSL is disabled (Tom Lane)
     </para>

     <para>
      This was concluded to be more user-friendly than the previous behavior
      of silently ignoring such lines.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix typo in <function>pg_srand48</> seed initialization (Andres Freund)
     </para>

     <para>
      This led to failure to use all bits of the provided seed.  This function
      is not used on most platforms (only those without <function>srandom</>),
      and the potential security exposure from a less-random-than-expected
      seed seems minimal in any case.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid integer overflow when the sum of <literal>LIMIT</> and
      <literal>OFFSET</> values exceeds 2^63 (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Add overflow checks to <type>int4</> and <type>int8</> versions of
      <function>generate_series()</> (Robert Haas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix trailing-zero removal in <function>to_char()</> (Marti Raudsepp)
     </para>

     <para>
      In a format with <literal>FM</> and no digit positions
      after the decimal point, zeroes to the left of the decimal point could
      be removed incorrectly.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>pg_size_pretty()</> to avoid overflow for inputs close to
      2^63 (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Weaken plpgsql's check for typmod matching in record values (Tom Lane)
     </para>

     <para>
      An overly enthusiastic check could lead to discarding length modifiers
      that should have been kept.
     </para>
    </listitem>

    <listitem>
     <para>
      Correctly handle quotes in locale names during <application>initdb</>
      (Heikki Linnakangas)
     </para>

     <para>
      The case can arise with some Windows locales, such as <quote>People's
      Republic of China</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_upgrade</> to preserve toast tables' relfrozenxids
      during an upgrade from 8.3 (Bruce Momjian)
     </para>

     <para>
      Failure to do this could lead to <filename>pg_clog</> files being
      removed too soon after the upgrade.
     </para>
    </listitem>

    <listitem>
     <para>
      In <application>pg_ctl</>, support silent mode for service registrations
      on Windows (MauMau)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>psql</>'s counting of script file line numbers during
      <literal>COPY</> from a different file (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_restore</>'s direct-to-database mode for
      <varname>standard_conforming_strings</> (Tom Lane)
     </para>

     <para>
      <application>pg_restore</> could emit incorrect commands when restoring
      directly to a database server from an archive file that had been made
      with <varname>standard_conforming_strings</> set to <literal>on</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Be more user-friendly about unsupported cases for parallel
      <application>pg_restore</> (Tom Lane)
     </para>

     <para>
      This change ensures that such cases are detected and reported before
      any restore actions have been taken.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix write-past-buffer-end and memory leak in <application>libpq</>'s
      LDAP service lookup code (Albe Laurenz)
     </para>
    </listitem>

    <listitem>
     <para>
      In <application>libpq</>, avoid failures when using nonblocking I/O
      and an SSL connection (Martin Pihlak, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve libpq's handling of failures during connection startup
      (Tom Lane)
     </para>

     <para>
      In particular, the response to a server report of <function>fork()</>
      failure during SSL connection startup is now saner.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve <application>libpq</>'s error reporting for SSL failures (Tom
      Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>PQsetvalue()</> to avoid possible crash when adding a new
      tuple to a <structname>PGresult</> originally obtained from a server
      query (Andrew Chernow)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>ecpglib</> write <type>double</> values with 15 digits
      precision (Akira Kurosawa)
     </para>
    </listitem>

    <listitem>
     <para>
      In <application>ecpglib</>, be sure <literal>LC_NUMERIC</> setting is
      restored after an error (Michael Meskes)
     </para>
    </listitem>

    <listitem>
     <para>
      Apply upstream fix for blowfish signed-character bug (CVE-2011-2483)
      (Tom Lane)
     </para>

     <para>
      <filename>contrib/pg_crypto</>'s blowfish encryption code could give
      wrong results on platforms where char is signed (which is most),
      leading to encrypted passwords being weaker than they should be.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in <filename>contrib/seg</> (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>pgstatindex()</> to give consistent results for empty
      indexes (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Allow building with perl 5.14 (Alex Hunsaker)
     </para>
    </listitem>

    <listitem>
     <para>
      Update configure script's method for probing existence of system
      functions (Tom Lane)
     </para>

     <para>
      The version of autoconf we used in 8.3 and 8.2 could be fooled by
      compilers that perform link-time optimization.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix assorted issues with build and install file paths containing spaces
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2011i
      for DST law changes in Canada, Egypt, Russia, Samoa, and South Sudan.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-8">
  <title>Release 8.4.8</title>

  <note>
  <title>Release Date</title>
  <simpara>2011-04-18</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.7.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.8</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

   <para>
    However, if your installation was upgraded from a previous major
    release by running <application>pg_upgrade</>, you should take
    action to prevent possible data loss due to a now-fixed bug in
    <application>pg_upgrade</>.  The recommended solution is to run
    <command>VACUUM FREEZE</> on all TOAST tables.
    More information is available at <ulink
    url="http://wiki.postgresql.org/wiki/20110408pg_upgrade_fix">
    http://wiki.postgresql.org/wiki/20110408pg_upgrade_fix</ulink>.
   </para>

   <para>
    Also, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix <application>pg_upgrade</>'s handling of TOAST tables
      (Bruce Momjian)
     </para>

     <para>
      The <structname>pg_class</>.<structfield>relfrozenxid</> value for
      TOAST tables was not correctly copied into the new installation
      during <application>pg_upgrade</>.  This could later result in
      <literal>pg_clog</> files being discarded while they were still
      needed to validate tuples in the TOAST tables, leading to
      <quote>could not access status of transaction</> failures.
     </para>

     <para>
      This error poses a significant risk of data loss for installations
      that have been upgraded with <application>pg_upgrade</>.  This patch
      corrects the problem for future uses of <application>pg_upgrade</>,
      but does not in itself cure the issue in installations that have been
      processed with a buggy version of <application>pg_upgrade</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Suppress incorrect <quote>PD_ALL_VISIBLE flag was incorrectly set</>
      warning (Heikki Linnakangas)
     </para>

     <para>
      <command>VACUUM</> would sometimes issue this warning in cases that
      are actually valid.
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow including a composite type in itself (Tom Lane)
     </para>

     <para>
      This prevents scenarios wherein the server could recurse infinitely
      while processing the composite type.  While there are some possible
      uses for such a structure, they don't seem compelling enough to
      justify the effort required to make sure it always works safely.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid potential deadlock during catalog cache initialization
      (Nikhil Sontakke)
     </para>

     <para>
      In some cases the cache loading code would acquire share lock on a
      system index before locking the index's catalog.  This could deadlock
      against processes trying to acquire exclusive locks in the other,
      more standard order.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix dangling-pointer problem in <literal>BEFORE ROW UPDATE</> trigger
      handling when there was a concurrent update to the target tuple
      (Tom Lane)
     </para>

     <para>
      This bug has been observed to result in intermittent <quote>cannot
      extract system attribute from virtual tuple</> failures while trying to
      do <literal>UPDATE RETURNING ctid</>.  There is a very small probability
      of more serious errors, such as generating incorrect index entries for
      the updated tuple.
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow <command>DROP TABLE</> when there are pending deferred trigger
      events for the table (Tom Lane)
     </para>

     <para>
      Formerly the <command>DROP</> would go through, leading to
      <quote>could not open relation with OID nnn</> errors when the
      triggers were eventually fired.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent crash triggered by constant-false WHERE conditions during
      GEQO optimization (Tom Lane)
     </para>

     <para>
     </para>
    </listitem>

    <listitem>
     <para>
      Improve planner's handling of semi-join and anti-join cases
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix selectivity estimation for text search to account for NULLs
      (Jesper Krogh)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve PL/pgSQL's ability to handle row types with dropped columns
      (Pavel Stehule)
     </para>

     <para>
      This is a back-patch of fixes previously made in 9.0.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix PL/Python memory leak involving array slices (Daniel Popowich)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_restore</> to cope with long lines (over 1KB) in
      TOC files (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Put in more safeguards against crashing due to division-by-zero
      with overly enthusiastic compiler optimization (Aurelien Jarno)
     </para>
    </listitem>

    <listitem>
     <para>
      Support use of dlopen() in FreeBSD and OpenBSD on MIPS (Tom Lane)
     </para>

     <para>
      There was a hard-wired assumption that this system function was not
      available on MIPS hardware on these systems.  Use a compile-time test
      instead, since more recent versions have it.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix compilation failures on HP-UX (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix version-incompatibility problem with <application>libintl</> on
      Windows (Hiroshi Inoue)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix usage of <application>xcopy</> in Windows build scripts to
      work correctly under Windows 7 (Andrew Dunstan)
     </para>

     <para>
      This affects the build scripts only, not installation or usage.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix path separator used by <application>pg_regress</> on Cygwin
      (Andrew Dunstan)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2011f
      for DST law changes in Chile, Cuba, Falkland Islands, Morocco, Samoa,
      and Turkey; also historical corrections for South Australia, Alaska,
      and Hawaii.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-7">
  <title>Release 8.4.7</title>

  <note>
  <title>Release Date</title>
  <simpara>2011-01-31</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.6.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.7</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Avoid failures when <command>EXPLAIN</> tries to display a simple-form
      <literal>CASE</> expression (Tom Lane)
     </para>

     <para>
      If the <literal>CASE</>'s test expression was a constant, the planner
      could simplify the <literal>CASE</> into a form that confused the
      expression-display code, resulting in <quote>unexpected CASE WHEN
      clause</> errors.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix assignment to an array slice that is before the existing range
      of subscripts (Tom Lane)
     </para>

     <para>
      If there was a gap between the newly added subscripts and the first
      pre-existing subscript, the code miscalculated how many entries needed
      to be copied from the old array's null bitmap, potentially leading to
      data corruption or crash.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid unexpected conversion overflow in planner for very distant date
      values (Tom Lane)
     </para>

     <para>
      The <type>date</> type supports a wider range of dates than can be
      represented by the <type>timestamp</> types, but the planner assumed it
      could always convert a date to timestamp with impunity.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_restore</>'s text output for large objects (BLOBs)
      when <varname>standard_conforming_strings</> is on (Tom Lane)
     </para>

     <para>
      Although restoring directly to a database worked correctly, string
      escaping was incorrect if <application>pg_restore</> was asked for
      SQL text output and <varname>standard_conforming_strings</> had been
      enabled in the source database.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix erroneous parsing of <type>tsquery</> values containing
      <literal>... &amp; !(subexpression) | ...</literal> (Tom Lane)
     </para>

     <para>
      Queries containing this combination of operators were not executed
      correctly.  The same error existed in <filename>contrib/intarray</>'s
      <type>query_int</> type and <filename>contrib/ltree</>'s
      <type>ltxtquery</> type.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix buffer overrun in <filename>contrib/intarray</>'s input function
      for the <type>query_int</> type (Apple)
     </para>

     <para>
      This bug is a security risk since the function's return address could
      be overwritten.  Thanks to Apple Inc's security team for reporting this
      issue and supplying the fix.  (CVE-2010-4015)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug in <filename>contrib/seg</>'s GiST picksplit algorithm
      (Alexander Korotkov)
     </para>

     <para>
      This could result in considerable inefficiency, though not actually
      incorrect answers, in a GiST index on a <type>seg</> column.
      If you have such an index, consider <command>REINDEX</>ing it after
      installing this update.  (This is identical to the bug that was fixed in
      <filename>contrib/cube</> in the previous update.)
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-6">
  <title>Release 8.4.6</title>

  <note>
  <title>Release Date</title>
  <simpara>2010-12-16</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.5.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.6</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Force the default
      <link linkend="guc-wal-sync-method"><varname>wal_sync_method</></link>
      to be <literal>fdatasync</> on Linux (Tom Lane, Marti Raudsepp)
     </para>

     <para>
      The default on Linux has actually been <literal>fdatasync</> for many
      years, but recent kernel changes caused <productname>PostgreSQL</> to
      choose <literal>open_datasync</> instead.  This choice did not result
      in any performance improvement, and caused outright failures on
      certain filesystems, notably <literal>ext4</> with the
      <literal>data=journal</> mount option.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix assorted bugs in WAL replay logic for GIN indexes (Tom Lane)
     </para>

     <para>
      This could result in <quote>bad buffer id: 0</> failures or
      corruption of index contents during replication.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix recovery from base backup when the starting checkpoint WAL record
      is not in the same WAL segment as its redo point (Jeff Davis)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix persistent slowdown of autovacuum workers when multiple workers
      remain active for a long time (Tom Lane)
     </para>

     <para>
      The effective <varname>vacuum_cost_limit</> for an autovacuum worker
      could drop to nearly zero if it processed enough tables, causing it
      to run extremely slowly.
     </para>
    </listitem>

    <listitem>
     <para>
      Add support for detecting register-stack overrun on <literal>IA64</>
      (Tom Lane)
     </para>

     <para>
      The <literal>IA64</> architecture has two hardware stacks.  Full
      prevention of stack-overrun failures requires checking both.
     </para>
    </listitem>

    <listitem>
     <para>
      Add a check for stack overflow in <function>copyObject()</> (Tom Lane)
     </para>

     <para>
      Certain code paths could crash due to stack overflow given a
      sufficiently complex query.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix detection of page splits in temporary GiST indexes (Heikki
      Linnakangas)
     </para>

     <para>
      It is possible to have a <quote>concurrent</> page split in a
      temporary index, if for example there is an open cursor scanning the
      index when an insertion is done.  GiST failed to detect this case and
      hence could deliver wrong results when execution of the cursor
      continued.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix error checking during early connection processing (Tom Lane)
     </para>

     <para>
      The check for too many child processes was skipped in some cases,
      possibly leading to postmaster crash when attempting to add the new
      child process to fixed-size arrays.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve efficiency of window functions (Tom Lane)
     </para>

     <para>
      Certain cases where a large number of tuples needed to be read in
      advance, but <varname>work_mem</> was large enough to allow them all
      to be held in memory, were unexpectedly slow.
      <function>percent_rank()</>, <function>cume_dist()</> and
      <function>ntile()</> in particular were subject to this problem.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid memory leakage while <command>ANALYZE</>'ing complex index
      expressions (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure an index that uses a whole-row Var still depends on its table
      (Tom Lane)
     </para>

     <para>
      An index declared like <literal>create index i on t (foo(t.*))</>
      would not automatically get dropped when its table was dropped.
     </para>
    </listitem>

    <listitem>
     <para>
      Do not <quote>inline</> a SQL function with multiple <literal>OUT</>
      parameters (Tom Lane)
     </para>

     <para>
      This avoids a possible crash due to loss of information about the
      expected result rowtype.
     </para>
    </listitem>

    <listitem>
     <para>
      Behave correctly if <literal>ORDER BY</>, <literal>LIMIT</>,
      <literal>FOR UPDATE</>, or <literal>WITH</> is attached to the
      <literal>VALUES</> part of <literal>INSERT ... VALUES</> (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix constant-folding of <literal>COALESCE()</> expressions (Tom Lane)
     </para>

     <para>
      The planner would sometimes attempt to evaluate sub-expressions that
      in fact could never be reached, possibly leading to unexpected errors.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix postmaster crash when connection acceptance
      (<function>accept()</> or one of the calls made immediately after it)
      fails, and the postmaster was compiled with GSSAPI support (Alexander
      Chernikov)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix missed unlink of temporary files when <varname>log_temp_files</>
      is active (Tom Lane)
     </para>

     <para>
      If an error occurred while attempting to emit the log message, the
      unlink was not done, resulting in accumulation of temp files.
     </para>
    </listitem>

    <listitem>
     <para>
      Add print functionality for <structname>InhRelation</> nodes (Tom Lane)
     </para>

     <para>
      This avoids a failure when <varname>debug_print_parse</> is enabled
      and certain types of query are executed.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect calculation of distance from a point to a horizontal
      line segment (Tom Lane)
     </para>

     <para>
      This bug affected several different geometric distance-measurement
      operators.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect calculation of transaction status in
      <application>ecpg</> (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>PL/pgSQL</>'s handling of <quote>simple</>
      expressions to not fail in recursion or error-recovery cases (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>PL/Python</>'s handling of set-returning functions
      (Jan Urbanski)
     </para>

     <para>
      Attempts to call SPI functions within the iterator generating a set
      result would fail.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug in <filename>contrib/cube</>'s GiST picksplit algorithm
      (Alexander Korotkov)
     </para>

     <para>
      This could result in considerable inefficiency, though not actually
      incorrect answers, in a GiST index on a <type>cube</> column.
      If you have such an index, consider <command>REINDEX</>ing it after
      installing this update.
     </para>
    </listitem>

    <listitem>
     <para>
      Don't emit <quote>identifier will be truncated</> notices in
      <filename>contrib/dblink</> except when creating new connections
      (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix potential coredump on missing public key in
      <filename>contrib/pgcrypto</> (Marti Raudsepp)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in <filename>contrib/xml2</>'s XPath query functions
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2010o
      for DST law changes in Fiji and Samoa;
      also historical corrections for Hong Kong.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-5">
  <title>Release 8.4.5</title>

  <note>
  <title>Release Date</title>
  <simpara>2010-10-04</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.4.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.5</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Use a separate interpreter for each calling SQL userid in PL/Perl and
      PL/Tcl (Tom Lane)
     </para>

     <para>
      This change prevents security problems that can be caused by subverting
      Perl or Tcl code that will be executed later in the same session under
      another SQL user identity (for example, within a <literal>SECURITY
      DEFINER</> function).  Most scripting languages offer numerous ways that
      that might be done, such as redefining standard functions or operators
      called by the target function.  Without this change, any SQL user with
      Perl or Tcl language usage rights can do essentially anything with the
      SQL privileges of the target function's owner.
     </para>

     <para>
      The cost of this change is that intentional communication among Perl
      and Tcl functions becomes more difficult.  To provide an escape hatch,
      PL/PerlU and PL/TclU functions continue to use only one interpreter
      per session.  This is not considered a security issue since all such
      functions execute at the trust level of a database superuser already.
     </para>

     <para>
      It is likely that third-party procedural languages that claim to offer
      trusted execution have similar security issues.  We advise contacting
      the authors of any PL you are depending on for security-critical
      purposes.
     </para>

     <para>
      Our thanks to Tim Bunce for pointing out this issue (CVE-2010-3433).
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent possible crashes in <function>pg_get_expr()</> by disallowing
      it from being called with an argument that is not one of the system
      catalog columns it's intended to be used with
      (Heikki Linnakangas, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Treat exit code 128 (<literal>ERROR_WAIT_NO_CHILDREN</>) as non-fatal on
      Windows (Magnus Hagander)
     </para>

     <para>
      Under high load, Windows processes will sometimes fail at startup with
      this error code.  Formerly the postmaster treated this as a panic
      condition and restarted the whole database, but that seems to be
      an overreaction.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect placement of placeholder evaluation (Tom Lane)
     </para>

     <para>
      This bug could result in query outputs being non-null when they
      should be null, in cases where the inner side of an outer join
      is a sub-select with non-strict expressions in its output list.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible duplicate scans of <literal>UNION ALL</> member relations
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <quote>cannot handle unplanned sub-select</quote> error (Tom Lane)
     </para>

     <para>
      This occurred when a sub-select contains a join alias reference that
      expands into an expression containing another sub-select.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix mishandling of whole-row Vars that reference a view or sub-select
      and appear within a nested sub-select (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix mishandling of cross-type <literal>IN</> comparisons (Tom Lane)
     </para>

     <para>
      This could result in failures if the planner tried to implement an
      <literal>IN</> join with a sort-then-unique-then-plain-join plan.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix computation of <command>ANALYZE</> statistics for <type>tsvector</>
      columns (Jan Urbanski)
     </para>

     <para>
      The original coding could produce incorrect statistics, leading to
      poor plan choices later.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve planner's estimate of memory used by <function>array_agg()</>,
      <function>string_agg()</>, and similar aggregate functions
      (Hitoshi Harada)
     </para>

     <para>
      The previous drastic underestimate could lead to out-of-memory failures
      due to inappropriate choice of a hash-aggregation plan.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix failure to mark cached plans as transient (Tom Lane)
     </para>

     <para>
      If a plan is prepared while <command>CREATE INDEX CONCURRENTLY</> is
      in progress for one of the referenced tables, it is supposed to be
      re-planned once the index is ready for use.  This was not happening
      reliably.
     </para>
    </listitem>

    <listitem>
     <para>
      Reduce PANIC to ERROR in some occasionally-reported btree failure cases,
      and provide additional detail in the resulting error messages
      (Tom Lane)
     </para>

     <para>
      This should improve the system's robustness with corrupted indexes.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect search logic for partial-match queries with GIN indexes
      (Tom Lane)
     </para>

     <para>
      Cases involving AND/OR combination of several GIN index conditions
      didn't always give the right answer, and were sometimes much slower
      than necessary.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent show_session_authorization() from crashing within autovacuum
      processes (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Defend against functions returning setof record where not all the
      returned rows are actually of the same rowtype (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible corruption of pending trigger event lists during
      subtransaction rollback (Tom Lane)
     </para>

     <para>
      This could lead to a crash or incorrect firing of triggers.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible failure when hashing a pass-by-reference function result
      (Tao Ma, Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve merge join's handling of NULLs in the join columns (Tom Lane)
     </para>

     <para>
      A merge join can now stop entirely upon reaching the first NULL,
      if the sort order is such that NULLs sort high.
     </para>
    </listitem>

    <listitem>
     <para>
      Take care to fsync the contents of lockfiles (both
      <filename>postmaster.pid</> and the socket lockfile) while writing them
      (Tom Lane)
     </para>

     <para>
      This omission could result in corrupted lockfile contents if the
      machine crashes shortly after postmaster start.  That could in turn
      prevent subsequent attempts to start the postmaster from succeeding,
      until the lockfile is manually removed.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid recursion while assigning XIDs to heavily-nested
      subtransactions (Andres Freund, Robert Haas)
     </para>

     <para>
      The original coding could result in a crash if there was limited
      stack space.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid holding open old WAL segments in the walwriter process
      (Magnus Hagander, Heikki Linnakangas)
     </para>

     <para>
      The previous coding would prevent removal of no-longer-needed segments.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <varname>log_line_prefix</>'s <literal>%i</> escape,
      which could produce junk early in backend startup (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent misinterpretation of partially-specified relation options
      for TOAST tables (Itagaki Takahiro)
     </para>

     <para>
      In particular, <literal>fillfactor</> would be read as zero if any
      other reloption had been set for the table, leading to serious bloat.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix inheritance count tracking in <command>ALTER TABLE ... ADD
      CONSTRAINT</> (Robert Haas)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible data corruption in <command>ALTER TABLE ... SET
      TABLESPACE</> when archiving is enabled (Jeff Davis)
     </para>
    </listitem>

    <listitem>
     <para>
      Allow <command>CREATE DATABASE</> and <command>ALTER DATABASE ... SET
      TABLESPACE</> to be interrupted by query-cancel (Guillaume Lelarge)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve <command>CREATE INDEX</>'s checking of whether proposed index
      expressions are immutable (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <command>REASSIGN OWNED</> to handle operator classes and families
      (Asko Tiidumaa)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible core dump when comparing two empty <type>tsquery</> values
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <literal>LIKE</>'s handling of patterns containing <literal>%</>
      followed by <literal>_</> (Tom Lane)
     </para>

     <para>
      We've fixed this before, but there were still some incorrectly-handled
      cases.
     </para>
    </listitem>

    <listitem>
     <para>
      Re-allow input of Julian dates prior to 0001-01-01 AD (Tom Lane)
     </para>

     <para>
      Input such as <literal>'J100000'::date</> worked before 8.4,
      but was unintentionally broken by added error-checking.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix PL/pgSQL to throw an error, not crash, if a cursor is closed within
      a <literal>FOR</> loop that is iterating over that cursor
      (Heikki Linnakangas)
     </para>
    </listitem>

    <listitem>
     <para>
      In PL/Python, defend against null pointer results from
      <function>PyCObject_AsVoidPtr</> and <function>PyCObject_FromVoidPtr</>
      (Peter Eisentraut)
     </para>
    </listitem>

    <listitem>
     <para>
      In <application>libpq</>, fix full SSL certificate verification for the
      case where both <literal>host</> and <literal>hostaddr</> are specified
      (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Make psql recognize <command>DISCARD ALL</> as a command that should
      not be encased in a transaction block in autocommit-off mode
      (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix some issues in <application>pg_dump</>'s handling of SQL/MED objects
      (Tom Lane)
     </para>

     <para>
      Notably, <application>pg_dump</> would always fail if run by a
      non-superuser, which was not intended.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve <application>pg_dump</> and <application>pg_restore</>'s
      handling of non-seekable archive files (Tom Lane, Robert Haas)
     </para>

     <para>
      This is important for proper functioning of parallel restore.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve parallel pg_restore's ability to cope with selective restore
      (<literal>-L</> option) (Tom Lane)
     </para>

     <para>
      The original code tended to fail if the <literal>-L</> file commanded
      a non-default restore ordering.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>ecpg</> to process data from <literal>RETURNING</>
      clauses correctly (Michael Meskes)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix some memory leaks in <application>ecpg</> (Zoltan Boszormenyi)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve <filename>contrib/dblink</>'s handling of tables containing
      dropped columns (Tom Lane)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix connection leak after <quote>duplicate connection name</quote>
      errors in <filename>contrib/dblink</> (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <filename>contrib/dblink</> to handle connection names longer than
      62 bytes correctly (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Add <function>hstore(text, text)</>
      function to <filename>contrib/hstore</> (Robert Haas)
     </para>

     <para>
      This function is the recommended substitute for the now-deprecated
      <literal>=&gt;</> operator.  It was back-patched so that future-proofed
      code can be used with older server versions.  Note that the patch will
      be effective only after <filename>contrib/hstore</> is installed or
      reinstalled in a particular database.  Users might prefer to execute
      the <command>CREATE FUNCTION</> command by hand, instead.
     </para>
    </listitem>

    <listitem>
     <para>
      Update build infrastructure and documentation to reflect the source code
      repository's move from CVS to Git (Magnus Hagander and others)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2010l
      for DST law changes in Egypt and Palestine; also historical corrections
      for Finland.
     </para>

     <para>
      This change also adds new names for two Micronesian timezones:
      Pacific/Chuuk is now preferred over Pacific/Truk (and the preferred
      abbreviation is CHUT not TRUT) and Pacific/Pohnpei is preferred over
      Pacific/Ponape.
     </para>
    </listitem>

    <listitem>
     <para>
      Make Windows' <quote>N. Central Asia Standard Time</> timezone map to
      Asia/Novosibirsk, not Asia/Almaty (Magnus Hagander)
     </para>

     <para>
      Microsoft changed the DST behavior of this zone in the timezone update
      from KB976098. Asia/Novosibirsk is a better match to its new behavior.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-4">
  <title>Release 8.4.4</title>

  <note>
  <title>Release Date</title>
  <simpara>2010-05-17</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.3.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.4</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Enforce restrictions in <literal>plperl</> using an opmask applied to
      the whole interpreter, instead of using <filename>Safe.pm</>
      (Tim Bunce, Andrew Dunstan)
     </para>

     <para>
      Recent developments have convinced us that <filename>Safe.pm</> is too
      insecure to rely on for making <literal>plperl</> trustable.  This
      change removes use of <filename>Safe.pm</> altogether, in favor of using
      a separate interpreter with an opcode mask that is always applied.
      Pleasant side effects of the change include that it is now possible to
      use Perl's <literal>strict</> pragma in a natural way in
      <literal>plperl</>, and that Perl's <literal>$a</> and <literal>$b</>
      variables work as expected in sort routines, and that function
      compilation is significantly faster.  (CVE-2010-1169)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent PL/Tcl from executing untrustworthy code from
      <structname>pltcl_modules</> (Tom)
     </para>

     <para>
      PL/Tcl's feature for autoloading Tcl code from a database table
      could be exploited for trojan-horse attacks, because there was no
      restriction on who could create or insert into that table.  This change
      disables the feature unless <structname>pltcl_modules</> is owned by a
      superuser.  (However, the permissions on the table are not checked, so
      installations that really need a less-than-secure modules table can
      still grant suitable privileges to trusted non-superusers.)  Also,
      prevent loading code into the unrestricted <quote>normal</> Tcl
      interpreter unless we are really going to execute a <literal>pltclu</>
      function.  (CVE-2010-1170)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix data corruption during WAL replay of
      <literal>ALTER ... SET TABLESPACE</> (Tom)
     </para>

     <para>
      When <varname>archive_mode</> is on, <literal>ALTER ... SET TABLESPACE</>
      generates a WAL record whose replay logic was incorrect.  It could write
      the data to the wrong place, leading to possibly-unrecoverable data
      corruption.  Data corruption would be observed on standby slaves, and
      could occur on the master as well if a database crash and recovery
      occurred after committing the <literal>ALTER</> and before the next
      checkpoint.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash if a cache reset message is received during
      rebuild of a relcache entry (Heikki)
     </para>

     <para>
      This error was introduced in 8.4.3 while fixing a related failure.
     </para>
    </listitem>

    <listitem>
     <para>
      Apply per-function GUC settings while running the language validator
      for the function (Itagaki Takahiro)
     </para>

     <para>
      This avoids failures if the function's code is invalid without the
      setting; an example is that SQL functions may not parse if the
      <varname>search_path</> is not correct.
     </para>
    </listitem>

    <listitem>
     <para>
      Do constraint exclusion for inherited <command>UPDATE</> and
      <command>DELETE</> target tables when
      <varname>constraint_exclusion</> = <literal>partition</> (Tom)
     </para>

     <para>
      Due to an oversight, this setting previously only caused constraint
      exclusion to be checked in <command>SELECT</> commands.
     </para>
    </listitem>

    <listitem>
     <para>
      Do not allow an unprivileged user to reset superuser-only parameter
      settings (Alvaro)
     </para>

     <para>
      Previously, if an unprivileged user ran <literal>ALTER USER ... RESET
      ALL</> for himself, or <literal>ALTER DATABASE ... RESET ALL</> for
      a database he owns, this would remove all special parameter settings
      for the user or database, even ones that are only supposed to be
      changeable by a superuser.  Now, the <command>ALTER</> will only
      remove the parameters that the user has permission to change.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid possible crash during backend shutdown if shutdown occurs
      when a <literal>CONTEXT</> addition would be made to log entries (Tom)
     </para>

     <para>
      In some cases the context-printing function would fail because the
      current transaction had already been rolled back when it came time
      to print a log message.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix erroneous handling of <literal>%r</> parameter in
      <varname>recovery_end_command</> (Heikki)
     </para>

     <para>
      The value always came out zero.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure the archiver process responds to changes in
      <varname>archive_command</> as soon as possible (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix pl/pgsql's <literal>CASE</> statement to not fail when the
      case expression is a query that returns no rows (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Update pl/perl's <filename>ppport.h</> for modern Perl versions
      (Andrew)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix assorted memory leaks in pl/python (Andreas Freund, Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Handle empty-string connect parameters properly in ecpg (Michael)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent infinite recursion in <application>psql</> when expanding
      a variable that refers to itself (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>psql</>'s <literal>\copy</> to not add spaces around
      a dot within <literal>\copy (select ...)</> (Tom)
     </para>

     <para>
      Addition of spaces around the decimal point in a numeric literal would
      result in a syntax error.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid formatting failure in <application>psql</> when running in a
      locale context that doesn't match the <varname>client_encoding</>
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix unnecessary <quote>GIN indexes do not support whole-index scans</>
      errors for unsatisfiable queries using <filename>contrib/intarray</>
      operators (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that <filename>contrib/pgstattuple</> functions respond to cancel
      interrupts promptly (Tatsuhito Kasahara)
     </para>
    </listitem>

    <listitem>
     <para>
      Make server startup deal properly with the case that
      <function>shmget()</> returns <literal>EINVAL</> for an existing
      shared memory segment (Tom)
     </para>

     <para>
      This behavior has been observed on BSD-derived kernels including OS X.
      It resulted in an entirely-misleading startup failure complaining that
      the shared memory request size was too large.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid possible crashes in syslogger process on Windows (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Deal more robustly with incomplete time zone information in the
      Windows registry (Magnus)
     </para>
    </listitem>

    <listitem>
     <para>
      Update the set of known Windows time zone names (Magnus)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2010j
      for DST law changes in Argentina, Australian Antarctic, Bangladesh,
      Mexico, Morocco, Pakistan, Palestine, Russia, Syria, Tunisia;
      also historical corrections for Taiwan.
     </para>

     <para>
      Also, add <literal>PKST</> (Pakistan Summer Time) to the default set of
      timezone abbreviations.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-3">
  <title>Release 8.4.3</title>

  <note>
  <title>Release Date</title>
  <simpara>2010-03-15</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.2.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.3</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you are upgrading from a version earlier than 8.4.2,
    see <xref linkend="release-8-4-2">.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Add new configuration parameter <varname>ssl_renegotiation_limit</> to
      control how often we do session key renegotiation for an SSL connection
      (Magnus)
     </para>

     <para>
      This can be set to zero to disable renegotiation completely, which may
      be required if a broken SSL library is used.  In particular, some
      vendors are shipping stopgap patches for CVE-2009-3555 that cause
      renegotiation attempts to fail.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible deadlock during backend startup (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crashes due to not handling errors during relcache reload
      cleanly (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash due to use of dangling pointer to a cached plan
      (Tatsuo)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash due to overenthusiastic invalidation of cached
      plan for <command>ROLLBACK</> (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crashes when trying to recover from a failure in
      subtransaction start (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix server memory leak associated with use of savepoints and a client
      encoding different from server's encoding (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect WAL data emitted during end-of-recovery cleanup of a GIST
      index page split (Yoichi Hirai)
     </para>

     <para>
      This would result in index corruption, or even more likely an error
      during WAL replay, if we were unlucky enough to crash during
      end-of-recovery cleanup after having completed an incomplete GIST
      insertion.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug in WAL redo cleanup method for GIN indexes (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect comparison of scan key in GIN index search (Teodor)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <function>substring()</> for <type>bit</> types treat any negative
      length as meaning <quote>all the rest of the string</> (Tom)
     </para>

     <para>
      The previous coding treated only -1 that way, and would produce an
      invalid result value for other negative values, possibly leading to
      a crash (CVE-2010-0442).
     </para>
    </listitem>

    <listitem>
     <para>
      Fix integer-to-bit-string conversions to handle the first fractional
      byte correctly when the output bit width is wider than the given
      integer by something other than a multiple of 8 bits (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix some cases of pathologically slow regular expression matching (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug occurring when trying to inline a SQL function that returns
      a set of a composite type that contains dropped columns (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug with trying to update a field of an element of a
      composite-type array column (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid failure when <command>EXPLAIN</> has to print a FieldStore or
      assignment ArrayRef expression (Tom)
     </para>

     <para>
      These cases can arise now that <command>EXPLAIN VERBOSE</> tries to
      print plan node target lists.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid an unnecessary coercion failure in some cases where an undecorated
      literal string appears in a subquery within
      <command>UNION</>/<command>INTERSECT</>/<command>EXCEPT</> (Tom)
     </para>

     <para>
      This fixes a regression for some cases that worked before 8.4.
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid undesirable rowtype compatibility check failures in some cases
      where a whole-row Var has a rowtype that contains dropped columns (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix the <literal>STOP WAL LOCATION</> entry in backup history files to
      report the next WAL segment's name when the end location is exactly at a
      segment boundary (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Always pass the catalog ID to an option validator function specified in
      <command>CREATE FOREIGN DATA WRAPPER</> (Martin Pihlak)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix some more cases of temporary-file leakage (Heikki)
     </para>

     <para>
      This corrects a problem introduced in the previous minor release.
      One case that failed is when a plpgsql function returning set is
      called within another function's exception handler.
     </para>
    </listitem>

    <listitem>
     <para>
      Add support for doing <literal>FULL JOIN ON FALSE</> (Tom)
     </para>

     <para>
      This prevents a regression from pre-8.4 releases for some queries that
      can now be simplified to a constant-false join condition.
     </para>
    </listitem>

    <listitem>
     <para>
      Improve constraint exclusion processing of boolean-variable cases,
      in particular make it possible to exclude a partition that has a
      <quote>bool_column = false</> constraint (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent treating an <literal>INOUT</> cast as representing binary
      compatibility (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Include column name in the message when warning about inability to
      grant or revoke column-level privileges (Stephen Frost)
     </para>

     <para>
      This is more useful than before and helps to prevent confusion when
      a <command>REVOKE</> generates multiple messages, which formerly
      appeared to be duplicates.
     </para>
    </listitem>

    <listitem>
     <para>
      When reading <filename>pg_hba.conf</> and related files, do not treat
      <literal>@something</> as a file inclusion request if the <literal>@</>
      appears inside quote marks; also, never treat <literal>@</> by itself
      as a file inclusion request (Tom)
     </para>

     <para>
      This prevents erratic behavior if a role or database name starts with
      <literal>@</>.  If you need to include a file whose path name
      contains spaces, you can still do so, but you must write
      <literal>@"/path to/file"</> rather than putting the quotes around
      the whole construct.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent infinite loop on some platforms if a directory is named as
      an inclusion target in <filename>pg_hba.conf</> and related files
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible infinite loop if <function>SSL_read</> or
      <function>SSL_write</> fails without setting <varname>errno</> (Tom)
     </para>

     <para>
      This is reportedly possible with some Windows versions of
      <application>openssl</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow <acronym>GSSAPI</> authentication on local connections,
      since it requires a hostname to function correctly (Magnus)
     </para>
    </listitem>

    <listitem>
     <para>
      Protect <application>ecpg</> against applications freeing strings
      unexpectedly (Michael)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>ecpg</> report the proper SQLSTATE if the connection
      disappears (Michael)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix translation of cell contents in <application>psql</> <literal>\d</>
      output (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>psql</>'s <literal>numericlocale</> option to not
      format strings it shouldn't in latex and troff output formats (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix a small per-query memory leak in <application>psql</> (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <application>psql</> return the correct exit status (3) when
      <literal>ON_ERROR_STOP</> and <literal>--single-transaction</> are
      both specified and an error occurs during the implied <command>COMMIT</>
      (Bruce)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_dump</>'s output of permissions for foreign servers
      (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash in parallel <application>pg_restore</> due to
      out-of-range dependency IDs (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix plpgsql failure in one case where a composite column is set to NULL
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible failure when calling PL/Perl functions from PL/PerlU
      or vice versa (Tim Bunce)
     </para>
    </listitem>

    <listitem>
     <para>
      Add <literal>volatile</> markings in PL/Python to avoid possible
      compiler-specific misbehavior (Zdenek Kotala)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure PL/Tcl initializes the Tcl interpreter fully (Tom)
     </para>

     <para>
      The only known symptom of this oversight is that the Tcl
      <literal>clock</> command misbehaves if using Tcl 8.5 or later.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent <function>ExecutorEnd</> from being run on portals created
      within a failed transaction or subtransaction (Tom)
     </para>

     <para>
      This is known to cause issues when using
      <filename>contrib/auto_explain</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent crash in <filename>contrib/dblink</> when too many key
      columns are specified to a <function>dblink_build_sql_*</> function
      (Rushabh Lathia, Joe Conway)
     </para>
    </listitem>

    <listitem>
     <para>
      Allow zero-dimensional arrays in <filename>contrib/ltree</> operations
      (Tom)
     </para>

     <para>
      This case was formerly rejected as an error, but it's more convenient to
      treat it the same as a zero-element array.  In particular this avoids
      unnecessary failures when an <type>ltree</> operation is applied to the
      result of <literal>ARRAY(SELECT ...)</> and the sub-select returns no
      rows.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix assorted crashes in <filename>contrib/xml2</> caused by sloppy
      memory management (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Make building of <filename>contrib/xml2</> more robust on Windows
      (Andrew)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix race condition in Windows signal handling (Radu Ilie)
     </para>

     <para>
      One known symptom of this bug is that rows in <structname>pg_listener</>
      could be dropped under heavy load.
     </para>
    </listitem>

    <listitem>
     <para>
      Make the configure script report failure if the C compiler does
      not provide a working 64-bit integer datatype (Tom)
     </para>

     <para>
      This case has been broken for some time, and no longer seems worth
      supporting, so just reject it at configure time instead.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2010e
      for DST law changes in Bangladesh, Chile, Fiji, Mexico, Paraguay, Samoa.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-2">
  <title>Release 8.4.2</title>

  <note>
  <title>Release Date</title>
  <simpara>2009-12-14</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.1.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.2</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
    However, if you have any hash indexes,
    you should <command>REINDEX</> them after updating to 8.4.2,
    to repair possible damage.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Protect against indirect security threats caused by index functions
      changing session-local state (Gurjeet Singh, Tom)
     </para>

     <para>
      This change prevents allegedly-immutable index functions from possibly
      subverting a superuser's session (CVE-2009-4136).
     </para>
    </listitem>

    <listitem>
     <para>
      Reject SSL certificates containing an embedded null byte in the common
      name (CN) field (Magnus)
     </para>

     <para>
      This prevents unintended matching of a certificate to a server or client
      name during SSL validation (CVE-2009-4034).
     </para>
    </listitem>

    <listitem>
     <para>
      Fix hash index corruption (Tom)
     </para>

     <para>
      The 8.4 change that made hash indexes keep entries sorted by hash value
      failed to update the bucket splitting and compaction routines to
      preserve the ordering.  So application of either of those operations
      could lead to permanent corruption of an index, in the sense that
      searches might fail to find entries that are present.  To deal with
      this, it is recommended to <literal>REINDEX</> any hash indexes you may
      have after installing this update.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash during backend-startup-time cache initialization (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid crash on empty thesaurus dictionary (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Prevent signals from interrupting <literal>VACUUM</> at unsafe times
      (Alvaro)
     </para>

     <para>
      This fix prevents a PANIC if a <literal>VACUUM FULL</> is canceled
      after it's already committed its tuple movements, as well as transient
      errors if a plain <literal>VACUUM</> is interrupted after having
      truncated the table.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible crash due to integer overflow in hash table size
      calculation (Tom)
     </para>

     <para>
      This could occur with extremely large planner estimates for the size of
      a hashjoin's result.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix crash if a <literal>DROP</> is attempted on an internally-dependent
      object (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix very rare crash in <type>inet</>/<type>cidr</> comparisons (Chris
      Mikkelson)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that shared tuple-level locks held by prepared transactions are
      not ignored (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix premature drop of temporary files used for a cursor that is accessed
      within a subtransaction (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in syslogger process when rotating to a new CSV logfile
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix memory leak in postmaster when re-parsing <filename>pg_hba.conf</>
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix Windows permission-downgrade logic (Jesse Morris)
     </para>

     <para>
      This fixes some cases where the database failed to start on Windows,
      often with misleading error messages such as <quote>could not locate
      matching postgres executable</quote>.
     </para>
    </listitem>

    <listitem>
     <para>
      Make <literal>FOR UPDATE/SHARE</> in the primary query not propagate
      into <literal>WITH</> queries (Tom)
     </para>

     <para>
      For example, in
<programlisting>
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
</programlisting>
      the <literal>FOR UPDATE</> will now affect <literal>bar</> but not
      <literal>foo</>.  This is more useful and consistent than the original
      8.4 behavior, which tried to propagate <literal>FOR UPDATE</> into the
      <literal>WITH</> query but always failed due to assorted implementation
      restrictions.  It also follows the design rule that <literal>WITH</>
      queries are executed as if independent of the main query.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug with a <literal>WITH RECURSIVE</> query immediately inside
      another one (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix concurrency bug in hash indexes (Tom)
     </para>

     <para>
      Concurrent insertions could cause index scans to transiently report
      wrong results.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect logic for GiST index page splits, when the split depends
      on a non-first column of the index (Paul Ramsey)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix wrong search results for a multi-column GIN index with
      <literal>fastupdate</> enabled (Teodor)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bugs in WAL entry creation for GIN indexes (Tom)
     </para>

     <para>
      These bugs were masked when <varname>full_page_writes</> was on, but
      with it off a WAL replay failure was certain if a crash occurred before
      the next checkpoint.
     </para>
    </listitem>

    <listitem>
     <para>
      Don't error out if recycling or removing an old WAL file fails at the
      end of checkpoint (Heikki)
     </para>

     <para>
      It's better to treat the problem as non-fatal and allow the checkpoint
      to complete.  Future checkpoints will retry the removal.  Such problems
      are not expected in normal operation, but have been seen to be
      caused by misdesigned Windows anti-virus and backup software.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure WAL files aren't repeatedly archived on Windows (Heikki)
     </para>

     <para>
      This is another symptom that could happen if some other process
      interfered with deletion of a no-longer-needed file.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix PAM password processing to be more robust (Tom)
     </para>

     <para>
      The previous code is known to fail with the combination of the Linux
      <literal>pam_krb5</> PAM module with Microsoft Active Directory as the
      domain controller.  It might have problems elsewhere too, since it was
      making unjustified assumptions about what arguments the PAM stack would
      pass to it.
     </para>
    </listitem>

    <listitem>
     <para>
      Raise the maximum authentication token (Kerberos ticket) size in GSSAPI
      and SSPI authentication methods (Ian Turner)
     </para>

     <para>
      While the old 2000-byte limit was more than enough for Unix Kerberos
      implementations, tickets issued by Windows Domain Controllers can be
      much larger.
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that domain constraints are enforced in constructs like
      <literal>ARRAY[...]::domain</>, where the domain is over an array type
      (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix foreign-key logic for some cases involving composite-type columns
      as foreign keys (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that a cursor's snapshot is not modified after it is created
      (Alvaro)
     </para>

     <para>
      This could lead to a cursor delivering wrong results if later operations
      in the same transaction modify the data the cursor is supposed to return.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <literal>CREATE TABLE</> to properly merge default expressions
      coming from different inheritance parent tables (Tom)
     </para>

     <para>
      This used to work but was broken in 8.4.
     </para>
    </listitem>

    <listitem>
     <para>
      Re-enable collection of access statistics for sequences (Akira Kurosawa)
     </para>

     <para>
      This used to work but was broken in 8.3.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix processing of ownership dependencies during <literal>CREATE OR
      REPLACE FUNCTION</> (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect handling of <literal>WHERE</>
      <replaceable>x</>=<replaceable>x</> conditions (Tom)
     </para>

     <para>
      In some cases these could get ignored as redundant, but they aren't
      &mdash; they're equivalent to <replaceable>x</> <literal>IS NOT NULL</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix incorrect plan construction when using hash aggregation to implement
      <literal>DISTINCT</> for textually identical volatile expressions (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix Assert failure for a volatile <literal>SELECT DISTINCT ON</>
      expression (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <function>ts_stat()</> to not fail on an empty <type>tsvector</>
      value (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Make text search parser accept underscores in XML attributes (Peter)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix encoding handling in <type>xml</> binary input (Heikki)
     </para>

     <para>
      If the XML header doesn't specify an encoding, we now assume UTF-8 by
      default; the previous handling was inconsistent.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix bug with calling <literal>plperl</> from <literal>plperlu</> or vice
      versa (Tom)
     </para>

     <para>
      An error exit from the inner function could result in crashes due to
      failure to re-select the correct Perl interpreter for the outer function.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix session-lifespan memory leak when a PL/Perl function is redefined
      (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that Perl arrays are properly converted to
      <productname>PostgreSQL</> arrays when returned by a set-returning
      PL/Perl function (Andrew Dunstan, Abhijit Menon-Sen)
     </para>

     <para>
      This worked correctly already for non-set-returning functions.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix rare crash in exception processing in PL/Python (Peter)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>ecpg</> problem with comments in <literal>DECLARE
      CURSOR</> statements (Michael)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>ecpg</> to not treat recently-added keywords as
      reserved words (Tom)
     </para>

     <para>
      This affected the keywords <literal>CALLED</>, <literal>CATALOG</>,
      <literal>DEFINER</>, <literal>ENUM</>, <literal>FOLLOWING</>,
      <literal>INVOKER</>, <literal>OPTIONS</>, <literal>PARTITION</>,
      <literal>PRECEDING</>, <literal>RANGE</>, <literal>SECURITY</>,
      <literal>SERVER</>, <literal>UNBOUNDED</>, and <literal>WRAPPER</>.
     </para>
    </listitem>

    <listitem>
     <para>
      Re-allow regular expression special characters in <application>psql</>'s
      <literal>\df</> function name parameter (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      In <filename>contrib/fuzzystrmatch</>, correct the calculation of
      <function>levenshtein</> distances with non-default costs (Marcin Mank)
     </para>
    </listitem>

    <listitem>
     <para>
      In <filename>contrib/pg_standby</>, disable triggering failover with a
      signal on Windows (Fujii Masao)
     </para>

     <para>
      This never did anything useful, because Windows doesn't have Unix-style
      signals, but recent changes made it actually crash.
     </para>
    </listitem>

    <listitem>
     <para>
      Put <literal>FREEZE</> and <literal>VERBOSE</> options in the right
      order in the <literal>VACUUM</> command that
      <filename>contrib/vacuumdb</> produces (Heikki)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix possible leak of connections when <filename>contrib/dblink</>
      encounters an error (Tatsuhito Kasahara)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure <application>psql</>'s flex module is compiled with the correct
      system header definitions (Tom)
     </para>

     <para>
      This fixes build failures on platforms where
      <literal>--enable-largefile</> causes incompatible changes in the
      generated code.
     </para>
    </listitem>

    <listitem>
     <para>
      Make the postmaster ignore any <literal>application_name</> parameter in
      connection request packets, to improve compatibility with future libpq
      versions (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Update the timezone abbreviation files to match current reality (Joachim
      Wieland)
     </para>

     <para>
      This includes adding <literal>IDT</> to the default
      timezone abbreviation set.
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2009s
      for DST law changes in Antarctica, Argentina, Bangladesh, Fiji,
      Novokuznetsk, Pakistan, Palestine, Samoa, Syria; also historical
      corrections for Hong Kong.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4-1">
  <title>Release 8.4.1</title>

  <note>
  <title>Release Date</title>
  <simpara>2009-09-09</simpara>
  </note>

  <para>
   This release contains a variety of fixes from 8.4.
   For information about new features in the 8.4 major release, see
   <xref linkend="release-8-4">.
  </para>

  <sect2>
   <title>Migration to Version 8.4.1</title>

   <para>
    A dump/restore is not required for those running 8.4.X.
   </para>

  </sect2>

  <sect2>
   <title>Changes</title>

   <itemizedlist>

    <listitem>
     <para>
      Fix WAL page header initialization at the end of archive recovery
      (Heikki)
     </para>

     <para>
      This could lead to failure to process the WAL in a subsequent
      archive recovery.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <quote>cannot make new WAL entries during recovery</> error (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix problem that could make expired rows visible after a crash (Tom)
     </para>

     <para>
      This bug involved a page status bit potentially not being set
      correctly after a server crash.
     </para>
    </listitem>

    <listitem>
     <para>
      Disallow <command>RESET ROLE</> and <command>RESET SESSION
      AUTHORIZATION</> inside security-definer functions (Tom, Heikki)
     </para>

     <para>
      This covers a case that was missed in the previous patch that
      disallowed <command>SET ROLE</> and <command>SET SESSION
      AUTHORIZATION</> inside security-definer functions.
      (See CVE-2007-6600)
     </para>
    </listitem>

    <listitem>
     <para>
      Make <command>LOAD</> of an already-loaded loadable module
      into a no-op (Tom)
     </para>

     <para>
      Formerly, <command>LOAD</> would attempt to unload and re-load the
      module, but this is unsafe and not all that useful.
     </para>
    </listitem>

    <listitem>
     <para>
      Make window function <literal>PARTITION BY</> and <literal>ORDER BY</>
      items always be interpreted as simple expressions (Tom)
     </para>

     <para>
      In 8.4.0 these lists were parsed following the rules used for
      top-level <literal>GROUP BY</> and <literal>ORDER BY</> lists.
      But this was not correct per the SQL standard, and it led to possible
      circularity.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix several errors in planning of semi-joins (Tom)
     </para>

     <para>
      These led to wrong query results in some cases where <literal>IN</>
      or <literal>EXISTS</> was used together with another join.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix handling of whole-row references to subqueries that are within
      an outer join (Tom)
     </para>

     <para>
      An example is
      <literal>SELECT COUNT(ss.*) FROM ... LEFT JOIN (SELECT ...) ss ON ...</>.
      Here, <literal>ss.*</> would be treated as <literal>ROW(NULL,NULL,...)</>
      for null-extended join rows, which is not the same as a simple NULL.
      Now it is treated as a simple NULL.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix Windows shared-memory allocation code (Tsutomu Yamada, Magnus)
     </para>

     <para>
      This bug led to the often-reported <quote>could not reattach
      to shared memory</> error message.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix locale handling with plperl (Heikki)
     </para>

     <para>
      This bug could cause the server's locale setting to change when a
      plperl function is called, leading to data corruption.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix handling of reloptions to ensure setting one option doesn't
      force default values for others (Itagaki Takahiro)
     </para>
    </listitem>

    <listitem>
     <para>
      Ensure that a <quote>fast shutdown</> request will forcibly terminate
      open sessions, even if a <quote>smart shutdown</> was already in progress
      (Fujii Masao)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid memory leak for <function>array_agg()</> in <literal>GROUP BY</>
      queries (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Treat <function>to_char(..., 'TH')</> as an uppercase ordinal
      suffix with <literal>'HH'</>/<literal>'HH12'</> (Heikki)
     </para>

     <para>
      It was previously handled as <literal>'th'</> (lowercase).
     </para>
    </listitem>

    <listitem>
     <para>
      Include the fractional part in the result of
      <function>EXTRACT(second)</> and
      <function>EXTRACT(milliseconds)</> for
      <type>time</> and <type>time with time zone</> inputs (Tom)
     </para>

     <para>
      This has always worked for floating-point datetime configurations,
      but was broken in the integer datetime code.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix overflow for <literal>INTERVAL '<replaceable>x</> ms'</literal>
      when <replaceable>x</> is more than 2 million and integer
      datetimes are in use (Alex Hunsaker)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve performance when processing toasted values in index scans (Tom)
     </para>

     <para>
      This is particularly useful for <ulink
      url="http://postgis.refractions.net/">PostGIS</ulink>.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix a typo that disabled <varname>commit_delay</> (Jeff Janes)
     </para>
    </listitem>

    <listitem>
     <para>
      Output early-startup messages to <filename>postmaster.log</> if the
      server is started in silent mode (Tom)
     </para>

     <para>
      Previously such error messages were discarded, leading to
      difficulty in debugging.
     </para>
    </listitem>

    <listitem>
     <para>
      Remove translated FAQs (Peter)
     </para>

     <para>
      They are now on the <ulink
      url="http://wiki.postgresql.org/wiki/FAQ">wiki</ulink>.  The
      main FAQ was moved to the wiki some time ago.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <application>pg_ctl</> to not go into an infinite loop if
      <filename>postgresql.conf</> is empty (Jeff Davis)
     </para>
    </listitem>

    <listitem>
     <para>
      Fix several errors in <application>pg_dump</>'s
      <literal>--binary-upgrade</> mode (Bruce, Tom)
     </para>

     <para>
      <literal>pg_dump --binary-upgrade</> is used by pg_migrator.
     </para>
    </listitem>

    <listitem>
     <para>
      Fix <filename>contrib/xml2</>'s <function>xslt_process()</> to
      properly handle the maximum number of parameters (twenty) (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Improve robustness of <application>libpq</>'s code to recover
      from errors during <command>COPY FROM STDIN</> (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Avoid including conflicting readline and editline header files
      when both libraries are installed (Zdenek Kotala)
     </para>
    </listitem>

    <listitem>
     <para>
      Work around gcc bug that causes <quote>floating-point exception</>
      instead of <quote>division by zero</> on some platforms (Tom)
     </para>
    </listitem>

    <listitem>
     <para>
      Update time zone data files to <application>tzdata</> release 2009l
      for DST law changes in Bangladesh, Egypt, Mauritius.
     </para>
    </listitem>

   </itemizedlist>

  </sect2>
 </sect1>

 <sect1 id="release-8-4">
  <title>Release 8.4</title>

  <note>
   <title>Release Date</title>
   <simpara>2009-07-01</simpara>
  </note>

  <sect2>
   <title>Overview</title>

   <para>
    After many years of development, <productname>PostgreSQL</> has
    become feature-complete in many areas.   This release shows a
    targeted approach to adding features (e.g., authentication,
    monitoring, space reuse), and adds capabilities defined in the
    later SQL standards.  The major areas of enhancement are:
   </para>

   <itemizedlist>

    <!-- This list duplicates items below, but without authors or details-->

    <listitem>
     <para>
      Windowing Functions
     </para>
    </listitem>

    <listitem>
     <para>
      Common Table Expressions and Recursive Queries
     </para>
    </listitem>

    <listitem>
     <para>
      Default and variadic parameters for functions
     </para>
    </listitem>

    <listitem>
     <para>
      Parallel Restore
     </para>
    </listitem>

    <listitem>
     <para>
      Column Permissions
     </para>
    </listitem>

    <listitem>
     <para>
      Per-database locale settings
     </para>
    </listitem>

    <listitem>
     <para>
      Improved hash indexes
     </para>
    </listitem>

    <listitem>
     <para>
      Improved join performance for <literal>EXISTS</> and <literal>NOT EXISTS</> queries
     </para>
    </listitem>

    <listitem>
     <para>
      Easier-to-use Warm Standby
     </para>
    </listitem>

    <listitem>
     <para>
      Automatic sizing of the Free Space Map
     </para>
    </listitem>

    <listitem>
     <para>
      Visibility Map (greatly reduces vacuum overhead for slowly-changing tables)
     </para>
    </listitem>

    <listitem>
     <para>
      Version-aware psql (backslash commands work against older servers)
     </para>
    </listitem>

    <listitem>
     <para>
      Support SSL certificates for user authentication
     </para>
    </listitem>

    <listitem>
     <para>
      Per-function runtime statistics
     </para>
    </listitem>

    <listitem>
     <para>
      Easy editing of functions in psql
     </para>
    </listitem>

    <listitem>
     <para>
      New contrib modules: pg_stat_statements, auto_explain, citext, btree_gin
     </para>
    </listitem>

   </itemizedlist>

   <para>
    The above items are explained in more detail in the sections below.
   </para>

  </sect2>

  <sect2>
   <title>Migration to Version 8.4</title>

   <para>
    A dump/restore using <application>pg_dump</application> is
    required for those wishing to migrate data from any previous
    release.
   </para>

   <para>
    Observe the following incompatibilities:
   </para>

   <sect3>
    <title>General</title>
    <itemizedlist>

     <listitem>
      <para>
       Use 64-bit integer datetimes by default (Neil Conway)
      </para>

      <para>
       Previously this was selected by <application>configure</>'s
       <option>--enable-integer-datetimes</> option.  To retain
       the old behavior, build with <option>--disable-integer-datetimes</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <application>ipcclean</> utility command (Bruce)
      </para>

      <para>
       The utility only worked on a few platforms.  Users should use
       their operating system tools instead.
      </para>
     </listitem>

    </itemizedlist>

   </sect3>

   <sect3>
    <title>Server Settings</title>
    <itemizedlist>

     <listitem>
      <para>
       Change default setting for
       <literal>log_min_messages</> to <literal>warning</> (previously
       it was <literal>notice</>) to reduce log file volume (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Change default setting for <literal>max_prepared_transactions</> to
       zero (previously it was 5) (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <literal>debug_print_parse</>, <literal>debug_print_rewritten</>,
       and <literal>debug_print_plan</>
       output appear at <literal>LOG</> message level, not
       <literal>DEBUG1</> as formerly (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <literal>debug_pretty_print</> default to <literal>on</> (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <varname>explain_pretty_print</> parameter (no longer needed) (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <varname>log_temp_files</> settable by superusers only, like other
       logging options (Simon Riggs)
      </para>
     </listitem>

     <listitem>
      <para>
       Remove automatic appending of the epoch timestamp when no <literal>%</>
       escapes are present in <literal>log_filename</> (Robert Haas)
      </para>

      <para>
       This change was made because some users wanted a fixed log filename,
       for use with an external log rotation tool.
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <varname>log_restartpoints</> from <filename>recovery.conf</>;
       instead use <varname>log_checkpoints</> (Simon)
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <varname>krb_realm</> and <varname>krb_server_hostname</>;
       these are now set in <filename>pg_hba.conf</> instead (Magnus)
      </para>
     </listitem>

     <listitem>
      <para>
       There are also significant changes in <link
       linkend="release-8-4-pg-hba-conf"><filename>pg_hba.conf</></link>,
       as described below.
      </para>
     </listitem>

    </itemizedlist>

   </sect3>

   <sect3>
    <title>Queries</title>

    <itemizedlist>

     <listitem>
      <para>
       Change <command>TRUNCATE</> and <command>LOCK</> to
       apply to child tables of the specified table(s) (Peter)
      </para>

      <para>
       These commands now accept an <literal>ONLY</> option that prevents
       processing child tables; this option must be used if the old
       behavior is needed.
      </para>
     </listitem>

     <listitem>
      <para>
       <command>SELECT DISTINCT</> and
       <literal>UNION</>/<literal>INTERSECT</>/<literal>EXCEPT</>
       no longer always produce sorted output (Tom)
      </para>

      <para>
       Previously, these types of queries always removed duplicate rows
       by means of Sort/Unique processing (i.e., sort then remove adjacent
       duplicates).  Now they can be implemented by hashing, which will not
       produce sorted output.  If an application relied on the output being
       in sorted order, the recommended fix is to add an <literal>ORDER BY</>
       clause.  As a short-term workaround, the previous behavior can be
       restored by disabling <literal>enable_hashagg</>, but that is a very
       performance-expensive fix.  <literal>SELECT DISTINCT ON</> never uses
       hashing, however, so its behavior is unchanged.
      </para>
     </listitem>

     <listitem>
      <para>
       Force child tables to inherit <literal>CHECK</> constraints from parents
       (Alex Hunsaker, Nikhil Sontakke, Tom)
      </para>

      <para>
       Formerly it was possible to drop such a constraint from a child
       table, allowing rows that violate the constraint to be visible
       when scanning the parent table.  This was deemed inconsistent,
       as well as contrary to SQL standard.
      </para>
     </listitem>

     <listitem>
      <para>
       Disallow negative <literal>LIMIT</> or <literal>OFFSET</>
       values, rather than treating them as zero (Simon)
      </para>
     </listitem>

     <listitem>
      <para>
       Disallow <command>LOCK TABLE</> outside a transaction block
       (Tom)
      </para>

      <para>
       Such an operation is useless because the lock would be released
       immediately.
      </para>
     </listitem>

     <listitem>
      <para>
       Sequences now contain an additional <structfield>start_value</> column
       (Zoltan Boszormenyi)
      </para>

      <para>
       This supports <command>ALTER SEQUENCE ... RESTART</>.
      </para>
     </listitem>

    </itemizedlist>

   </sect3>


   <sect3>
    <title>Functions and Operators</title>

    <itemizedlist>

     <listitem>
      <para>
       Make <type>numeric</> zero raised to a fractional power return
       <literal>0</>, rather than throwing an error, and make
       <type>numeric</> zero raised to the zero power return <literal>1</>,
       rather than error (Bruce)
      </para>

      <para>
       This matches the longstanding <type>float8</> behavior.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow unary minus of floating-point values to produce minus zero (Tom)
      </para>

      <para>
       The changed behavior is more <acronym>IEEE</>-standard
       compliant.
      </para>
     </listitem>

     <listitem>
      <para>
       Throw an error if an escape character is the last character in
       a <literal>LIKE</> pattern (i.e., it has nothing to escape) (Tom)
      </para>

      <para>
       Previously, such an escape character was silently ignored,
       thus possibly masking application logic errors.
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <literal>~=~</> and <literal>~&lt;&gt;~</> operators
       formerly used for <literal>LIKE</> index comparisons (Tom)
      </para>

      <para>
       Pattern indexes now use the regular equality operator.
      </para>
     </listitem>

     <listitem>
      <para>
       <function>xpath()</> now passes its arguments to <application>libxml</>
       without any changes (Andrew)
      </para>

      <para>
       This means that the XML argument must be a well-formed XML document.
       The previous coding attempted to allow XML fragments, but it did not
       work well.
      </para>
     </listitem>

     <listitem>
      <para>
       Make <function>xmlelement()</> format attribute values just like
       content values (Peter)
      </para>

      <para>
       Previously, attribute values were formatted according to the
       normal SQL output behavior, which is sometimes at odds with
       XML rules.
      </para>
     </listitem>

     <listitem>
      <para>
       Rewrite memory management for <application>libxml</>-using functions
       (Tom)
      </para>

      <para>
       This change should avoid some compatibility problems with use of
       <application>libxml</> in PL/Perl and other add-on code.
      </para>
     </listitem>

     <listitem>
      <para>
       Adopt a faster algorithm for hash functions (Kenneth Marshall,
       based on work of Bob Jenkins)
      </para>

      <para>
       Many of the built-in hash functions now deliver different results on
       little-endian and big-endian platforms.
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title>Temporal Functions and Operators</title>

     <itemizedlist>

      <listitem>
       <para>
        <varname>DateStyle</> no longer controls <type>interval</> output
        formatting; instead there is a new variable <varname>IntervalStyle</>
        (Ron Mayer)
       </para>
      </listitem>

      <listitem>
       <para>
        Improve consistency of handling of fractional seconds in
        <type>timestamp</> and <type>interval</> output (Ron Mayer)
       </para>

       <para>
        This may result in displaying a different number of fractional
        digits than before, or rounding instead of truncating.
       </para>
      </listitem>

      <listitem>
       <para>
        Make <function>to_char()</>'s localized month/day names depend
        on <varname>LC_TIME</>, not <varname>LC_MESSAGES</> (Euler
        Taveira de Oliveira)
       </para>
      </listitem>

      <listitem>
       <para>
        Cause <function>to_date()</> and <function>to_timestamp()</>
        to more consistently report errors for invalid input (Brendan
        Jurd)
       </para>

       <para>
        Previous versions would often ignore or silently misread input
        that did not match the format string.  Such cases will now
        result in an error.
       </para>
      </listitem>

      <listitem>
       <para>
        Fix <function>to_timestamp()</> to not require upper/lower case
        matching for meridian (<literal>AM</>/<literal>PM</>) and era
        (<literal>BC</>/<literal>AD</>) format designations  (Brendan
        Jurd)
       </para>

       <para>
        For example, input value <literal>ad</> now matches the format
        string <literal>AD</>.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

  </sect2>

  <sect2>
   <title>Changes</title>

   <para>
    Below you will find a detailed account of the changes between
    <productname>PostgreSQL</productname> 8.4 and the previous major
    release.
   </para>

   <sect3>
    <title>Performance</title>
    <itemizedlist>

     <listitem>
      <para>
       Improve optimizer statistics calculations (Jan Urbanski, Tom)
      </para>

      <para>
       In particular, estimates for full-text-search operators are
       greatly improved.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <command>SELECT DISTINCT</> and
       <literal>UNION</>/<literal>INTERSECT</>/<literal>EXCEPT</> to
       use hashing (Tom)
      </para>

      <para>
       This means that these types of queries no longer automatically
       produce sorted output.
      </para>
     </listitem>

     <listitem>
      <para>
       Create explicit concepts of semi-joins and anti-joins (Tom)
      </para>

      <para>
       This work formalizes our previous ad-hoc treatment of <literal>IN
       (SELECT ...)</> clauses, and extends it to <literal>EXISTS</> and
       <literal>NOT EXISTS</> clauses.  It should result in significantly
       better planning of <literal>EXISTS</> and <literal>NOT EXISTS</>
       queries.  In general, logically equivalent <literal>IN</> and
       <literal>EXISTS</> clauses should now have similar performance,
       whereas previously <literal>IN</> often won.
      </para>
     </listitem>

     <listitem>
      <para>
       Improve optimization of sub-selects beneath outer joins (Tom)
      </para>

      <para>
       Formerly, a sub-select or view could not be optimized very well if it
       appeared within the nullable side of an outer join and contained
       non-strict expressions (for instance, constants) in its result list.
      </para>
     </listitem>

     <listitem>
      <para>
       Improve the performance of <function>text_position()</> and
       related functions by using Boyer-Moore-Horspool searching (David
       Rowley)
      </para>

      <para>
       This is particularly helpful for long search patterns.
      </para>
     </listitem>

     <listitem>
      <para>
       Reduce I/O load of writing the statistics collection file
       by writing the file only when requested (Martin Pihlak)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve performance for bulk inserts (Robert Haas, Simon)
      </para>
     </listitem>

     <listitem>
      <para>
       Increase the default value of <varname>default_statistics_target</>
       from <literal>10</> to <literal>100</> (Greg Sabino Mullane,
       Tom)
      </para>

      <para>
       The maximum value was also increased from <literal>1000</> to
       <literal>10000</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Perform <varname>constraint_exclusion</> checking by default
       in queries involving inheritance or <literal>UNION ALL</> (Tom)
      </para>

      <para>
       A new <varname>constraint_exclusion</> setting,
       <literal>partition</>, was added to specify this behavior.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow I/O read-ahead for bitmap index scans (Greg Stark)
      </para>

      <para>
       The amount of read-ahead is controlled by
       <varname>effective_io_concurrency</>.  This feature is available only
       if the kernel has <function>posix_fadvise()</> support.
      </para>
     </listitem>

     <listitem>
      <para>
       Inline simple set-returning <acronym>SQL</> functions in
       <literal>FROM</> clauses (Richard Rowell)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve performance of multi-batch hash joins by providing a special
       case for join key values that are especially common in the outer
       relation (Bryce Cutt, Ramon Lawrence)
      </para>
     </listitem>

     <listitem>
      <para>
       Reduce volume of temporary data in multi-batch hash joins
       by suppressing <quote>physical tlist</> optimization (Michael
       Henderson, Ramon Lawrence)
      </para>
     </listitem>

     <listitem>
      <para>
       Avoid waiting for idle-in-transaction sessions during
       <command>CREATE INDEX CONCURRENTLY</> (Simon)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve performance of shared cache invalidation (Tom)
      </para>
     </listitem>

    </itemizedlist>

   </sect3>

   <sect3>
    <title>Server</title>

    <sect4>
     <title>Settings</title>

     <itemizedlist>

      <listitem>
       <para>
        Convert many <filename>postgresql.conf</> settings to enumerated
        values so that <literal>pg_settings</> can display the valid
        values (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <varname>cursor_tuple_fraction</> parameter to control the
        fraction of a cursor's rows that the planner assumes will be
        fetched (Robert Hell)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow underscores in the names of custom variable
        classes in <filename>postgresql.conf</> (Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Authentication and security</title>
     <itemizedlist>

      <listitem>
       <para>
        Remove support for the (insecure) <literal>crypt</> authentication method
        (Magnus)
       </para>

       <para>
        This effectively obsoletes pre-<productname>PostgreSQL</> 7.2 client
        libraries, as there is no longer any non-plaintext password method that
        they can use.
       </para>
      </listitem>

      <listitem>
       <para>
        Support regular expressions in <filename>pg_ident.conf</>
        (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <productname>Kerberos</>/<acronym>GSSAPI</> parameters
        to be changed without restarting the postmaster (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Support <acronym>SSL</> certificate chains in server certificate
        file (Andrew Gierth)
       </para>

       <para>
        Including the full certificate chain makes the client able
        to verify the certificate without having all intermediate CA
        certificates present in the local store, which is often the case for
        commercial CAs.
       </para>
      </listitem>

      <listitem>
       <para>
        Report appropriate error message for combination of <literal>MD5</>
        authentication and <varname>db_user_namespace</> enabled (Bruce)
       </para>
      </listitem>
     </itemizedlist>

    </sect4>

    <sect4 id="release-8-4-pg-hba-conf">
     <title><filename>pg_hba.conf</></title>
     <itemizedlist>

      <listitem>
       <para>
        Change all authentication options to use <literal>name=value</>
        syntax (Magnus)
       </para>

       <para>
        This makes incompatible changes to the <literal>ldap</>,
        <literal>pam</> and <literal>ident</> authentication methods. All
        <filename>pg_hba.conf</> entries with these methods need to be
        rewritten using the new format.
       </para>
      </listitem>

      <listitem>
       <para>
        Remove the <literal>ident sameuser</> option, instead making that
        behavior the default if no usermap is specified (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow a usermap parameter for all external authentication methods
        (Magnus)
       </para>

       <para>
        Previously a usermap was only supported for <literal>ident</>
        authentication.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>clientcert</> option to control requesting of a
        client certificate (Magnus)
       </para>

       <para>
        Previously this was controlled by the presence of a root
        certificate file in the server's data directory.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>cert</> authentication method to allow
        <emphasis>user</> authentication via <acronym>SSL</> certificates
        (Magnus)
       </para>

       <para>
        Previously <acronym>SSL</> certificates could only verify that
        the client had access to a certificate, not authenticate a
        user.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <literal>krb5</>, <literal>gssapi</> and <literal>sspi</>
        realm and <literal>krb5</> host settings to be specified in
        <filename>pg_hba.conf</> (Magnus)
       </para>

       <para>
        These override the settings in <filename>postgresql.conf</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <varname>include_realm</> parameter for <literal>krb5</>,
        <literal>gssapi</>, and <literal>sspi</> methods (Magnus)
       </para>

       <para>
        This allows identical usernames from different realms to be
        authenticated as different database users using usermaps.
       </para>
      </listitem>

      <listitem>
       <para>
        Parse <filename>pg_hba.conf</> fully when it is loaded,
        so that errors are reported immediately (Magnus)
       </para>

       <para>
        Previously, most errors in the file wouldn't be detected until clients
        tried to connect, so an erroneous file could render the system
        unusable.  With the new behavior, if an error is detected during
        reload then the bad file is rejected and the postmaster continues
        to use its old copy.
       </para>
      </listitem>

      <listitem>
       <para>
        Show all parsing errors in <filename>pg_hba.conf</> instead of
        aborting after the first one (Selena Deckelmann)
       </para>
      </listitem>

      <listitem>
       <para>
        Support <literal>ident</> authentication over Unix-domain sockets
        on <productname>Solaris</> (Garick Hamlin)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Continuous Archiving</title>
     <itemizedlist>

      <listitem>
       <para>
        Provide an option to <function>pg_start_backup()</> to force its
        implied checkpoint to finish as quickly as possible (Tom)
       </para>

       <para>
        The default behavior avoids excess I/O consumption, but that is
        pointless if no concurrent query activity is going on.
       </para>
      </listitem>

      <listitem>
       <para>
        Make <function>pg_stop_backup()</> wait for modified <acronym>WAL</>
        files to be archived (Simon)
       </para>

       <para>
        This guarantees that the backup is valid at the time
        <function>pg_stop_backup()</> completes.
       </para>
      </listitem>

      <listitem>
       <para>
        When archiving is enabled, rotate the last WAL segment at shutdown
        so that all transactions can be archived immediately
        (Guillaume Smet, Heikki)
       </para>
      </listitem>

      <listitem>
       <para>
        Delay <quote>smart</> shutdown while a continuous archiving base backup
        is in progress (Laurenz Albe)
       </para>
      </listitem>

      <listitem>
       <para>
        Cancel a continuous archiving base backup if <quote>fast</> shutdown
        is requested (Laurenz Albe)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <filename>recovery.conf</> boolean variables to take the
        same range of string values as <filename>postgresql.conf</>
        boolean variables
        (Bruce)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Monitoring</title>
     <itemizedlist>

      <listitem>
       <para>
        Add <function>pg_conf_load_time()</> to report when
        the <productname>PostgreSQL</> configuration files were last loaded
        (George Gensure)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>pg_terminate_backend()</> to safely terminate a
        backend (the <literal>SIGTERM</> signal works also) (Tom, Bruce)
       </para>

       <para>
        While it's always been possible to <literal>SIGTERM</> a single
        backend, this was previously considered unsupported; and testing
        of the case found some bugs that are now fixed.
       </para>
      </listitem>

      <listitem>
       <para>
        Add ability to track user-defined functions' call counts and
        runtimes (Martin Pihlak)
       </para>

       <para>
        Function statistics appear in a new system view,
        <literal>pg_stat_user_functions</>.  Tracking is controlled
        by the new parameter <varname>track_functions</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow specification of the maximum query string size in
        <literal>pg_stat_activity</> via new
        <varname>track_activity_query_size</> parameter (Thomas Lee)
       </para>
      </listitem>

      <listitem>
       <para>
        Increase the maximum line length sent to <application>syslog</>, in
        hopes of improving performance (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Add read-only configuration variables <varname>segment_size</>,
        <varname>wal_block_size</>, and <varname>wal_segment_size</>
        (Bernd Helmle)
       </para>
      </listitem>

      <listitem>
       <para>
        When reporting a deadlock, report the text of all queries involved
        in the deadlock to the server log  (Itagaki Takahiro)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>pg_stat_get_activity(pid)</> function to return
        information about a specific process id (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow the location of the server's statistics file to be specified
        via <varname>stats_temp_directory</> (Magnus)
       </para>

       <para>
        This allows the statistics file to be placed in a
        <acronym>RAM</>-resident directory to reduce I/O requirements.
        On startup/shutdown, the file is copied to its traditional location
        (<literal>$PGDATA/global/</>) so it is preserved across restarts.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Queries</title>
    <itemizedlist>

     <listitem>
      <para>
       Add support for <literal>WINDOW</> functions (Hitoshi Harada)
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for <literal>WITH</> clauses (CTEs), including <literal>WITH
       RECURSIVE</> (Yoshiyuki Asaba, Tatsuo Ishii, Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <command>TABLE</> command (Peter)
      </para>

      <para>
       <literal>TABLE tablename</> is a SQL standard short-hand for
       <literal>SELECT * FROM tablename</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <literal>AS</> to be optional when specifying a
       <command>SELECT</> (or <literal>RETURNING</>) column output
       label (Hiroshi Saito)
      </para>

      <para>
       This works so long as the column label is not any
       <productname>PostgreSQL</> keyword; otherwise <literal>AS</> is still
       needed.
      </para>
     </listitem>

     <listitem>
      <para>
       Support set-returning functions in <command>SELECT</> result lists
       even for functions that return their result via a tuplestore (Tom)
      </para>

      <para>
       In particular, this means that functions written in PL/pgSQL
       and other PL languages can now be called this way.
      </para>
     </listitem>

     <listitem>
      <para>
       Support set-returning functions in the output of aggregation
       and grouping queries (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <command>SELECT FOR UPDATE</>/<literal>SHARE</> to work
       on inheritance trees (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add infrastructure for <acronym>SQL/MED</> (Martin Pihlak,
       Peter)
      </para>

      <para>
       There are no remote or external <acronym>SQL/MED</> capabilities
       yet, but this change provides a standardized and future-proof
       system for managing connection information for modules like
       <filename>dblink</> and <filename>plproxy</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Invalidate cached plans when referenced schemas, functions, operators,
       or operator classes are modified (Martin Pihlak, Tom)
      </para>

      <para>
       This improves the system's ability to respond to on-the-fly
       DDL changes.
      </para>
     </listitem>
     <listitem>
      <para>
       Allow comparison of composite types and allow arrays of
       anonymous composite types (Tom)
      </para>

      <para>
       This allows constructs such as
       <literal>row(1, 1.1) = any (array[row(7, 7.7), row(1, 1.0)])</>.
       This is particularly useful in recursive queries.
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for Unicode string literal and identifier specifications
       using code points, e.g. <literal>U&amp;'d\0061t\+000061'</>
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Reject <literal>\000</> in string literals and <command>COPY</> data
       (Tom)
      </para>

      <para>
       Previously, this was accepted but had the effect of terminating
       the string contents.
      </para>
     </listitem>

     <listitem>
      <para>
       Improve the parser's ability to report error locations (Tom)
      </para>

      <para>
       An error location is now reported for many semantic errors,
       such as mismatched datatypes, that previously could not be localized.
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title><command>TRUNCATE</></title>
     <itemizedlist>

      <listitem>
       <para>
        Support statement-level <literal>ON TRUNCATE</> triggers (Simon)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>RESTART</>/<literal>CONTINUE IDENTITY</> options
        for <command>TRUNCATE TABLE</>
        (Zoltan Boszormenyi)
       </para>

       <para>
        The start value of a sequence can be changed by <command>ALTER
        SEQUENCE START WITH</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <command>TRUNCATE tab1, tab1</> to succeed (Bruce)
       </para>
      </listitem>

      <listitem>
       <para>
        Add a separate <command>TRUNCATE</> permission (Robert Haas)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><command>EXPLAIN</></title>
     <itemizedlist>

      <listitem>
       <para>
        Make <command>EXPLAIN VERBOSE</> show the output columns of each
        plan node (Tom)
       </para>

       <para>
        Previously <command>EXPLAIN VERBOSE</> output an internal
        representation of the query plan.  (That behavior is now
        available via <varname>debug_print_plan</>.)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>EXPLAIN</> identify subplans and initplans with
        individual labels (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>EXPLAIN</> honor <varname>debug_print_plan</> (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <command>EXPLAIN</> on <command>CREATE TABLE AS</> (Peter)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><literal>LIMIT</>/<literal>OFFSET</></title>
     <itemizedlist>

      <listitem>
       <para>
        Allow sub-selects in <literal>LIMIT</> and <literal>OFFSET</> (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <acronym>SQL</>-standard syntax for
        <literal>LIMIT</>/<literal>OFFSET</> capabilities (Peter)
       </para>

       <para>
        To wit,
        <literal>OFFSET num {ROW|ROWS} FETCH {FIRST|NEXT} [num] {ROW|ROWS}
        ONLY</>.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Object Manipulation</title>
    <itemizedlist>

     <listitem>
      <para>
       Add support for column-level privileges (Stephen Frost, KaiGai
       Kohei)
      </para>
     </listitem>

     <listitem>
      <para>
       Refactor multi-object <command>DROP</> operations to reduce the
       need for <literal>CASCADE</> (Alex Hunsaker)
      </para>

      <para>
       For example, if table <literal>B</> has a dependency on table
       <literal>A</>, the command <literal>DROP TABLE A, B</> no longer
       requires the <literal>CASCADE</> option.
      </para>
     </listitem>

     <listitem>
      <para>
       Fix various problems with concurrent <command>DROP</> commands
       by ensuring that locks are taken before we begin to drop dependencies
       of an object (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve reporting of dependencies during <command>DROP</>
       commands (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <literal>WITH [NO] DATA</> clause to <command>CREATE TABLE
       AS</>, per the <acronym>SQL</> standard (Peter, Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for user-defined I/O conversion casts (Heikki)
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <command>CREATE AGGREGATE</> to use an <type>internal</>
       transition datatype (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <literal>LIKE</> clause to <command>CREATE TYPE</> (Tom)
      </para>

      <para>
       This simplifies creation of data types that use the same internal
       representation as an existing type.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow specification of the type category and <quote>preferred</>
       status for user-defined base types (Tom)
      </para>

      <para>
       This allows more control over the coercion behavior of user-defined
       types.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <command>CREATE OR REPLACE VIEW</> to add columns to the
       end of a view (Robert Haas)
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title><command>ALTER</></title>
     <itemizedlist>

      <listitem>
       <para>
        Add <command>ALTER TYPE RENAME</> (Petr Jelinek)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <command>ALTER SEQUENCE ... RESTART</> (with no parameter) to
        reset a sequence to its initial value (Zoltan Boszormenyi)
       </para>
      </listitem>

      <listitem>
       <para>
        Modify the <command>ALTER TABLE</> syntax to allow all reasonable
        combinations for tables, indexes, sequences, and views (Tom)
       </para>

       <para>
        This change allows the following new syntaxes:

        <itemizedlist>
         <listitem>
          <para>
           <command>ALTER SEQUENCE OWNER TO</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>ALTER VIEW ALTER COLUMN SET/DROP DEFAULT</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>ALTER VIEW OWNER TO</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>ALTER VIEW SET SCHEMA</>
          </para>
         </listitem>
        </itemizedlist>

        There is no actual new functionality here, but formerly
        you had to say <command>ALTER TABLE</> to do these things,
        which was confusing.
       </para>
      </listitem>

      <listitem>
       <para>
        Add support for the syntax <command>ALTER TABLE ... ALTER COLUMN
        ... SET DATA TYPE</> (Peter)
       </para>

       <para>
        This is <acronym>SQL</>-standard syntax for functionality that
        was already supported.
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>ALTER TABLE SET WITHOUT OIDS</> rewrite the table
        to physically remove <type>OID</> values (Tom)
       </para>

       <para>
        Also, add <command>ALTER TABLE SET WITH OIDS</> to rewrite the
        table to add <type>OID</>s.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Database Manipulation</title>
     <itemizedlist>

      <listitem>
       <para>
        Improve reporting of
        <command>CREATE</>/<command>DROP</>/<command>RENAME DATABASE</>
        failure when uncommitted prepared transactions are the cause
        (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <varname>LC_COLLATE</> and <varname>LC_CTYPE</> into
        per-database settings (Radek Strnad, Heikki)
       </para>

       <para>
        This makes collation similar to encoding, which was always
        configurable per database.
       </para>
      </listitem>

      <listitem>
       <para>
        Improve checks that the database encoding, collation
        (<varname>LC_COLLATE</>), and character classes
        (<varname>LC_CTYPE</>) match (Heikki, Tom)
       </para>

       <para>
        Note in particular that a new database's encoding and locale
        settings can be changed only when copying from <literal>template0</>.
        This prevents possibly copying data that doesn't match the settings.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <command>ALTER DATABASE SET TABLESPACE</> to move a database
        to a new tablespace (Guillaume Lelarge, Bernd Helmle)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Utility Operations</title>

    <itemizedlist>

     <listitem>
      <para>
       Add a <literal>VERBOSE</> option to the <command>CLUSTER</> command and
       <application>clusterdb</> (Jim Cox)
      </para>
     </listitem>

     <listitem>
      <para>
       Decrease memory requirements for recording pending trigger
       events (Tom)
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title>Indexes</title>
     <itemizedlist>

      <listitem>
       <para>
        Dramatically improve the speed of building and accessing hash
        indexes (Tom Raney, Shreya Bhargava)
       </para>

       <para>
        This allows hash indexes to be sometimes faster than btree
        indexes.  However, hash indexes are still not crash-safe.
       </para>
      </listitem>

      <listitem>
       <para>
        Make hash indexes store only the hash code, not the full value of
        the indexed column (Xiao Meng)
       </para>

       <para>
        This greatly reduces the size of hash indexes for long indexed
        values, improving performance.
       </para>
      </listitem>

      <listitem>
       <para>
        Implement fast update option for GIN indexes (Teodor, Oleg)
       </para>

       <para>
        This option greatly improves update speed at a small penalty in search
        speed.
       </para>
      </listitem>

      <listitem>
       <para>
        <literal>xxx_pattern_ops</> indexes can now be used for simple
        equality comparisons, not only for <literal>LIKE</> (Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Full Text Indexes</title>
     <itemizedlist>

      <listitem>
       <para>
        Remove the requirement to use <literal>@@@</> when doing
        <acronym>GIN</> weighted lookups on full text indexes (Tom, Teodor)
       </para>

       <para>
        The normal <literal>@@</> text search operator can be used
        instead.
       </para>
      </listitem>

      <listitem>
       <para>
        Add an optimizer selectivity function for <literal>@@</> text
        search operations (Jan Urbanski)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow prefix matching in full text searches (Teodor Sigaev,
        Oleg Bartunov)
       </para>
      </listitem>

      <listitem>
       <para>
        Support multi-column <acronym>GIN</> indexes (Teodor Sigaev)
       </para>
      </listitem>

      <listitem>
       <para>
        Improve support for Nepali language and Devanagari alphabet (Teodor)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><command>VACUUM</></title>
     <itemizedlist>

      <listitem>
       <para>
        Track free space in separate per-relation <quote>fork</> files (Heikki)
       </para>

       <para>
        Free space discovered by <command>VACUUM</> is now recorded in
        <filename>*_fsm</> files, rather than in a fixed-sized shared memory
        area.  The <varname>max_fsm_pages</> and <varname>max_fsm_relations</>
        settings have been removed, greatly simplifying administration of
        free space management.
       </para>
      </listitem>

      <listitem>
       <para>
        Add a visibility map to track pages that do not require
        vacuuming (Heikki)
       </para>

       <para>
        This allows <command>VACUUM</> to avoid scanning all of
        a table when only a portion of the table needs vacuuming.
        The visibility map is stored in per-relation <quote>fork</> files.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <varname>vacuum_freeze_table_age</> parameter to control
        when <command>VACUUM</> should ignore the visibility map and
        do a full table scan to freeze tuples (Heikki)
       </para>
      </listitem>

      <listitem>
       <para>
        Track transaction snapshots more carefully (Alvaro)
       </para>

       <para>
        This improves <command>VACUUM</>'s ability to reclaim space
        in the presence of long-running transactions.
       </para>
      </listitem>

      <listitem>
       <para>
        Add ability to specify per-relation autovacuum and <acronym>TOAST</>
        parameters in <command>CREATE TABLE</> (Alvaro, Euler Taveira de
        Oliveira)
       </para>

       <para>
        Autovacuum options used to be stored in a system table.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>--freeze</> option to <application>vacuumdb</>
        (Bruce)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Data Types</title>
    <itemizedlist>

     <listitem>
      <para>
       Add a <literal>CaseSensitive</> option for text search synonym
       dictionaries (Simon)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve the precision of <type>NUMERIC</> division (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add basic arithmetic operators for <type>int2</> with <type>int8</>
       (Tom)
      </para>

      <para>
       This eliminates the need for explicit casting in some situations.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <type>UUID</> input to accept an optional hyphen after
       every fourth digit (Robert Haas)
      </para>
     </listitem>

     <listitem>
      <para>
       Allow <literal>on</>/<literal>off</> as input for the boolean data type
       (Itagaki Takahiro)
      </para>
     </listitem>

     <listitem>
      <para>
       Allow spaces around <literal>NaN</> in the input string for
       type <type>numeric</> (Sam Mason)
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title>Temporal Data Types</title>
     <itemizedlist>

      <listitem>
       <para>
        Reject year <literal>0 BC</> and years <literal>000</> and
        <literal>0000</> (Tom)
       </para>

       <para>
        Previously these were interpreted as <literal>1 BC</>.
        (Note: years <literal>0</> and <literal>00</> are still assumed to be
        the year 2000.)
       </para>
      </listitem>

      <listitem>
       <para>
        Include <literal>SGT</> (Singapore time) in the default list of
        known time zone abbreviations (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Support <literal>infinity</> and <literal>-infinity</> as
        values of type <type>date</> (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Make parsing of <type>interval</> literals more standard-compliant
        (Tom, Ron Mayer)
       </para>

       <para>
        For example, <literal>INTERVAL '1' YEAR</> now does what it's
        supposed to.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <type>interval</> fractional-seconds precision to be specified
        after the <literal>second</> keyword, for <acronym>SQL</> standard
        compliance (Tom)
       </para>

       <para>
        Formerly the precision had to be specified after the keyword
        <type>interval</>.  (For backwards compatibility, this syntax is still
        supported, though deprecated.)  Data type definitions will now be
        output using the standard format.
       </para>
      </listitem>

      <listitem>
       <para>
        Support the <acronym>IS0 8601</> <type>interval</> syntax (Ron
        Mayer, Kevin Grittner)
       </para>

       <para>
        For example, <literal>INTERVAL 'P1Y2M3DT4H5M6.7S'</> is now
        supported.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <varname>IntervalStyle</> parameter
        which controls how <type>interval</> values are output (Ron Mayer)
       </para>

       <para>
        Valid values are:  <literal>postgres</>, <literal>postgres_verbose</>,
        <literal>sql_standard</>, <literal>iso_8601</>.  This setting also
        controls the handling of negative <type>interval</> input when only
        some fields have positive/negative designations.
       </para>
      </listitem>

      <listitem>
       <para>
        Improve consistency of handling of fractional seconds in
        <type>timestamp</> and <type>interval</> output (Ron Mayer)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Arrays</title>
     <itemizedlist>

      <listitem>
       <para>
        Improve the handling of casts applied to <literal>ARRAY[]</>
        constructs, such as <literal>ARRAY[...]::integer[]</>
        (Brendan Jurd)
       </para>

       <para>
        Formerly <productname>PostgreSQL</> attempted to determine a data type
        for the <literal>ARRAY[]</> construct without reference to the ensuing
        cast.  This could fail unnecessarily in many cases, in particular when
        the <literal>ARRAY[]</> construct was empty or contained only
        ambiguous entries such as <literal>NULL</>.  Now the cast is consulted
        to determine the type that the array elements must be.
       </para>
      </listitem>

      <listitem>
       <para>
        Make <acronym>SQL</>-syntax <type>ARRAY</> dimensions optional
        to match the <acronym>SQL</> standard (Peter)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>array_ndims()</> to return the number
        of dimensions of an array (Robert Haas)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>array_length()</> to return the length
        of an array for a specified dimension (Jim Nasby, Robert
        Haas, Peter Eisentraut)
       </para>
      </listitem>

      <listitem>
       <para>
        Add aggregate function <function>array_agg()</>, which
        returns all aggregated values as a single array (Robert Haas,
        Jeff Davis, Peter)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>unnest()</>, which converts an array to
        individual row values (Tom)
       </para>

       <para>
        This is the opposite of <function>array_agg()</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>array_fill()</> to create arrays initialized with
        a value (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>generate_subscripts()</> to simplify generating
        the range of an array's subscripts (Pavel Stehule)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Wide-Value Storage (<acronym>TOAST</>)</title>
     <itemizedlist>

      <listitem>
       <para>
        Consider <acronym>TOAST</> compression on values as short as
        32 bytes (previously 256 bytes) (Greg Stark)
       </para>
      </listitem>

      <listitem>
       <para>
        Require 25% minimum space savings before using <acronym>TOAST</>
        compression (previously 20% for small values and any-savings-at-all
        for large values) (Greg)
       </para>
      </listitem>

      <listitem>
       <para>
        Improve <acronym>TOAST</> heuristics for rows that have a mix of large
        and small toastable fields, so that we prefer to push large values out
        of line and don't compress small values unnecessarily (Greg, Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Functions</title>
    <itemizedlist>

     <listitem>
      <para>
       Document that <function>setseed()</> allows values from
       <literal>-1</> to <literal>1</> (not just <literal>0</> to
       <literal>1</>), and enforce the valid range (Kris Jurka)
      </para>
     </listitem>

     <listitem>
      <para>
       Add server-side function <function>lo_import(filename, oid)</>
       (Tatsuo)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <function>quote_nullable()</>, which behaves like
       <function>quote_literal()</> but returns the string <literal>NULL</> for
       a null argument (Brendan Jurd)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve full text search <function>headline()</> function to
       allow extracting several fragments of text (Sushant Sinha)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <function>suppress_redundant_updates_trigger()</> trigger
       function to avoid overhead for non-data-changing updates (Andrew)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <function>div(numeric, numeric)</> to perform <type>numeric</>
       division without rounding (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <type>timestamp</> and <type>timestamptz</> versions of
       <function>generate_series()</> (Hitoshi Harada)
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title>Object Information Functions</title>
     <itemizedlist>

      <listitem>
       <para>
        Implement <function>current_query()</> for use by functions
        that need to know the currently running query (Tomas Doran)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>pg_get_keywords()</> to return a list of the
        parser keywords (Dave Page)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>pg_get_functiondef()</> to see a function's
        definition (Abhijit Menon-Sen)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow the second argument of <function>pg_get_expr()</> to be zero
        when deparsing an expression that does not contain variables (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Modify <function>pg_relation_size()</> to use <literal>regclass</>
        (Heikki)
       </para>

       <para>
        <function>pg_relation_size(data_type_name)</> no longer works.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>boot_val</> and <literal>reset_val</> columns to
        <literal>pg_settings</> output (Greg Smith)
       </para>
      </listitem>

      <listitem>
       <para>
        Add source file name and line number columns to
        <literal>pg_settings</> output for variables set in a configuration
        file (Magnus, Alvaro)
       </para>

       <para>
        For security reasons, these columns are only visible to superusers.
       </para>
      </listitem>

      <listitem>
       <para>
        Add support for <varname>CURRENT_CATALOG</>,
        <varname>CURRENT_SCHEMA</>, <varname>SET CATALOG</>, <varname>SET
        SCHEMA</> (Peter)
       </para>

       <para>
        These provide <acronym>SQL</>-standard syntax for existing features.
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>pg_typeof()</> which returns the data type
        of any value (Brendan Jurd)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <function>version()</> return information about whether
        the server is a 32- or 64-bit binary (Bruce)
       </para>
      </listitem>

      <listitem>
       <para>
        Fix the behavior of information schema columns
        <structfield>is_insertable_into</> and <structfield>is_updatable</> to
        be consistent (Peter)
       </para>
      </listitem>

      <listitem>
       <para>
        Improve the behavior of information schema
        <structfield>datetime_precision</> columns (Peter)
       </para>

       <para>
        These columns now show zero for <type>date</> columns, and 6
        (the default precision) for <type>time</>, <type>timestamp</>, and
        <type>interval</> without a declared precision, rather than showing
        null as formerly.
       </para>
      </listitem>

      <listitem>
       <para>
        Convert remaining builtin set-returning functions to use
        <literal>OUT</> parameters (Jaime Casanova)
       </para>

       <para>
        This makes it possible to call these functions without specifying
        a column list:  <function>pg_show_all_settings()</>,
        <function>pg_lock_status()</>, <function>pg_prepared_xact()</>,
        <function>pg_prepared_statement()</>, <function>pg_cursor()</>
       </para>
      </listitem>

      <listitem>
       <para>
        Make <function>pg_*_is_visible()</> and
        <function>has_*_privilege()</> functions return <literal>NULL</>
        for invalid OIDs, rather than reporting an error (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Extend <function>has_*_privilege()</> functions to allow inquiring
        about the OR of multiple privileges in one call (Stephen
        Frost, Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <function>has_column_privilege()</> and
        <function>has_any_column_privilege()</> functions (Stephen
        Frost, Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Function Creation</title>
     <itemizedlist>

      <listitem>
       <para>
        Support variadic functions (functions with a variable number
        of arguments) (Pavel Stehule)
       </para>

       <para>
        Only trailing arguments can be optional, and they all must be
        of the same data type.
       </para>
      </listitem>

      <listitem>
       <para>
        Support default values for function arguments (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <command>CREATE FUNCTION ... RETURNS TABLE</> clause (Pavel
        Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <acronym>SQL</>-language functions to return the output
        of an <command>INSERT</>/<command>UPDATE</>/<command>DELETE</>
        <literal>RETURNING</> clause (Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>PL/pgSQL Server-Side Language</title>
     <itemizedlist>

      <listitem>
       <para>
        Support <literal>EXECUTE USING</> for easier insertion of data
        values into a dynamic query string (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow looping over the results of a cursor using a <literal>FOR</>
        loop (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Support <literal>RETURN QUERY EXECUTE</> (Pavel
        Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Improve the <literal>RAISE</> command (Pavel Stehule)

        <itemizedlist>
         <listitem>
          <para>
           Support <literal>DETAIL</> and <literal>HINT</> fields
          </para>
         </listitem>
         <listitem>
          <para>
           Support specification of the <literal>SQLSTATE</> error code
          </para>
         </listitem>
         <listitem>
          <para>
           Support an exception name parameter
          </para>
         </listitem>
         <listitem>
          <para>
           Allow <literal>RAISE</> without parameters in an exception
           block to re-throw the current error
          </para>
         </listitem>
        </itemizedlist>
       </para>
      </listitem>

      <listitem>
       <para>
        Allow specification of <varname>SQLSTATE</> codes
        in <literal>EXCEPTION</> lists (Pavel Stehule)
       </para>

       <para>
        This is useful for handling custom <varname>SQLSTATE</> codes.
       </para>
      </listitem>

      <listitem>
       <para>
        Support the <literal>CASE</> statement (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>RETURN QUERY</> set the special <literal>FOUND</> and
        <command>GET DIAGNOSTICS</> <literal>ROW_COUNT</> variables
        (Pavel Stehule)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>FETCH</> and <command>MOVE</> set the
        <command>GET DIAGNOSTICS</> <literal>ROW_COUNT</> variable
        (Andrew Gierth)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>EXIT</> without a label always exit the innermost
        loop (Tom)
       </para>

       <para>
        Formerly, if there were a <literal>BEGIN</> block more closely nested
        than any loop, it would exit that block instead.  The new behavior
        matches Oracle(TM) and is also what was previously stated by our own
        documentation.
       </para>
      </listitem>

      <listitem>
       <para>
        Make processing of string literals and nested block comments
        match the main SQL parser's processing (Tom)
       </para>

       <para>
        In particular, the format string in <command>RAISE</> now works
        the same as any other string literal, including being subject
        to <varname>standard_conforming_strings</>.  This change also
        fixes other cases in which valid commands would fail when
        <varname>standard_conforming_strings</> is on.
       </para>
      </listitem>

      <listitem>
       <para>
        Avoid memory leakage when the same function is called at varying
        exception-block nesting depths (Tom)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Client Applications</title>

    <itemizedlist>

     <listitem>
      <para>
       Fix <literal>pg_ctl restart</> to preserve command-line arguments
       (Bruce)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <literal>-w</>/<literal>--no-password</> option that
       prevents password prompting in all utilities that have a
       <literal>-W</>/<literal>--password</> option (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Remove <option>-q</> (quiet) option of <application>createdb</>,
       <application>createuser</>, <application>dropdb</>,
       <application>dropuser</> (Peter)
      </para>

      <para>
       These options have had no effect since <productname>PostgreSQL</>
       8.3.
      </para>
     </listitem>

    </itemizedlist>

    <sect4>
     <title><application>psql</></title>
     <itemizedlist>

      <listitem>
       <para>
        Remove verbose startup banner; now just suggest <literal>help</>
        (Joshua Drake)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <literal>help</> show common backslash commands (Greg
        Sabino Mullane)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <literal>\pset format wrapped</> mode to wrap output to the
        screen width, or file/pipe output too if <literal>\pset columns</>
        is set (Bryce Nesbitt)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow all supported spellings of boolean values in <command>\pset</>,
        rather than just <literal>on</> and <literal>off</> (Bruce)
       </para>

       <para>
        Formerly, any string other than <quote>off</> was silently taken
        to mean <literal>true</>.  <application>psql</> will now complain
        about unrecognized spellings (but still take them as <literal>true</>).
       </para>
      </listitem>

      <listitem>
       <para>
        Use the pager for wide output (Bruce)
       </para>
      </listitem>

      <listitem>
       <para>
        Require a space between a one-letter backslash command and its first
        argument (Bernd Helmle)
       </para>

       <para>
        This removes a historical source of ambiguity.
       </para>
      </listitem>

      <listitem>
       <para>
        Improve tab completion support for schema-qualified and
        quoted identifiers (Greg Sabino Mullane)
       </para>
      </listitem>

      <listitem>
       <para>
        Add optional <literal>on</>/<literal>off</> argument for
        <command>\timing</> (David Fetter)
       </para>
      </listitem>

      <listitem>
       <para>
        Display access control rights on multiple lines (Brendan
        Jurd, Andreas Scherbaum)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>\l</> show database access privileges (Andrew Gilligan)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>\l+</> show database sizes, if permissions
        allow (Andrew Gilligan)
       </para>
      </listitem>

      <listitem>
       <para>
        Add the <command>\ef</> command to edit function definitions
        (Abhijit Menon-Sen)
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><application>psql</> \d* commands</title>

     <itemizedlist>

      <listitem>
       <para>
        Make <command>\d*</> commands that do not have a pattern argument
        show system objects only if the <literal>S</> modifier is specified
        (Greg Sabino Mullane, Bruce)
       </para>

       <para>
        The former behavior was inconsistent across different variants
        of <command>\d</>, and in most cases it provided no easy way to see
        just user objects.
       </para>
      </listitem>

      <listitem>
       <para>
        Improve <command>\d*</> commands to work with older
        <productname>PostgreSQL</> server versions (back to 7.4),
        not only the current server version
        (Guillaume Lelarge)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>\d</> show foreign-key constraints that reference
        the selected table (Kenneth D'Souza)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>\d</> on a sequence show its column values
        (Euler Taveira de Oliveira)
       </para>
      </listitem>

      <listitem>
       <para>
        Add column storage type and other relation options to the
        <command>\d+</> display (Gregory Stark, Euler Taveira de
        Oliveira)
       </para>
      </listitem>

      <listitem>
       <para>
        Show relation size in <command>\dt+</> output (Dickson S.
        Guedes)
       </para>
      </listitem>

      <listitem>
       <para>
        Show the possible values of <literal>enum</> types in <command>\dT+</>
        (David Fetter)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <command>\dC</> to accept a wildcard pattern, which matches
        either datatype involved in the cast (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Add a function type column to <command>\df</>'s output, and add
        options to list only selected types of functions (David Fetter)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <command>\df</> not hide functions that take or return
        type <type>cstring</> (Tom)
       </para>

       <para>
        Previously, such functions were hidden because most of them are
        datatype I/O functions, which were deemed uninteresting.  The new
        policy about hiding system functions by default makes this wart
        unnecessary.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><application>pg_dump</></title>
     <itemizedlist>

      <listitem>
       <para>
        Add a <literal>--no-tablespaces</> option to
        <application>pg_dump</>/<application>pg_dumpall</>/<application>pg_restore</>
        so that dumps can be restored to clusters that have non-matching
        tablespace layouts (Gavin Roy)
       </para>
      </listitem>

      <listitem>
       <para>
        Remove <option>-d</> and <option>-D</> options from
        <application>pg_dump</> and <application>pg_dumpall</> (Tom)
       </para>

       <para>
        These options were too frequently confused with the option to
        select a database name in other <productname>PostgreSQL</>
        client applications.  The functionality is still available,
        but you must now spell out the long option name
        <option>--inserts</> or <option>--column-inserts</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Remove <option>-i</>/<option>--ignore-version</> option from
        <application>pg_dump</> and <application>pg_dumpall</> (Tom)
       </para>

       <para>
        Use of this option does not throw an error, but it has no
        effect.  This option was removed because the version checks
        are necessary for safety.
       </para>
      </listitem>

      <listitem>
       <para>
        Disable <varname>statement_timeout</> during dump and restore
        (Joshua Drake)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <application>pg_dump</>/<application>pg_dumpall</> option
        <option>--lock-wait-timeout</> (David Gould)
       </para>

       <para>
        This allows dumps to fail if unable to acquire a shared lock
        within the specified amount of time.
       </para>
      </listitem>

      <listitem>
       <para>
        Reorder <application>pg_dump</> <literal>--data-only</> output
        to dump tables referenced by foreign keys before
        the referencing tables (Tom)
       </para>

       <para>
        This allows data loads when foreign keys are already present.
        If circular references make a safe ordering impossible, a
        <literal>NOTICE</> is issued.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <application>pg_dump</>, <application>pg_dumpall</>, and
        <application>pg_restore</> to use a specified role (Benedek
        L&aacute;szl&oacute;)
       </para>
      </listitem>

      <listitem>
       <para>
        Allow <application>pg_restore</> to use multiple concurrent
        connections to do the restore (Andrew)
       </para>

       <para>
        The number of concurrent connections is controlled by the option
        <literal>--jobs</>.  This is supported only for custom-format archives.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Programming Tools</title>

    <sect4>
     <title><application>libpq</></title>
     <itemizedlist>

      <listitem>
       <para>
        Allow the <type>OID</> to be specified when importing a large
        object, via new function <function>lo_import_with_oid()</> (Tatsuo)
       </para>
      </listitem>

      <listitem>
       <para>
        Add <quote>events</> support (Andrew Chernow, Merlin Moncure)
       </para>

       <para>
        This adds the ability to register callbacks to manage private
        data associated with <structname>PGconn</> and <structname>PGresult</>
        objects.
       </para>
      </listitem>

      <listitem>
       <para>
        Improve error handling to allow the return of multiple
        error messages as multi-line error reports (Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <function>PQexecParams()</> and related functions return
        <varname>PGRES_EMPTY_QUERY</> for an empty query (Tom)
       </para>

       <para>
        They previously returned <varname>PGRES_COMMAND_OK</>.
       </para>
      </listitem>

      <listitem>
       <para>
        Document how to avoid the overhead of <function>WSACleanup()</>
        on Windows (Andrew Chernow)
       </para>
      </listitem>

      <listitem>
       <para>
        Do not rely on Kerberos tickets to determine the default database
        username (Magnus)
       </para>

       <para>
        Previously, a Kerberos-capable build of libpq would use the
        principal name from any available Kerberos ticket as default
        database username, even if the connection wasn't using Kerberos
        authentication.  This was deemed inconsistent and confusing.
        The default username is now determined the same way with or
        without Kerberos.  Note however that the database username must still
        match the ticket when Kerberos authentication is used.
       </para>
      </listitem>
     </itemizedlist>

    </sect4>

    <sect4>
     <title><application>libpq</> <acronym>SSL</> (Secure Sockets Layer)
      support</title>
     <itemizedlist>

      <listitem>
       <para>
        Fix certificate validation for <acronym>SSL</> connections
        (Magnus)
       </para>

       <para>
        <application>libpq</> now supports verifying both the certificate
        and the name of the server when making <acronym>SSL</>
        connections. If a root certificate is not available to use for
        verification, <acronym>SSL</> connections will fail. The
        <literal>sslmode</> parameter is used to enable certificate
        verification and set the level of checking.
        The default is still not to do any verification, allowing connections
        to SSL-enabled servers without requiring a root certificate on the
        client.
       </para>
      </listitem>

      <listitem>
       <para>
        Support wildcard server certificates (Magnus)
       </para>

       <para>
        If a certificate <acronym>CN</> starts with <literal>*</>, it will
        be treated as a wildcard when matching the hostname, allowing the
        use of the same certificate for multiple servers.
       </para>
      </listitem>

      <listitem>
       <para>
        Allow the file locations for client certificates to be specified
        (Mark Woodward, Alvaro, Magnus)
       </para>
      </listitem>

      <listitem>
       <para>
        Add a <function>PQinitOpenSSL</> function to allow greater control
        over OpenSSL/libcrypto initialization (Andrew Chernow)
       </para>
      </listitem>

      <listitem>
       <para>
        Make <application>libpq</> unregister its <application>OpenSSL</>
        callbacks when no database connections remain open
        (Bruce, Magnus, Russell Smith)
       </para>

       <para>
        This is required for applications that unload the libpq library,
        otherwise invalid <application>OpenSSL</> callbacks will remain.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title><application>ecpg</></title>
     <itemizedlist>

      <listitem>
       <para>
        Add localization support for messages (Euler Taveira de
        Oliveira)
       </para>
      </listitem>

      <listitem>
       <para>
        ecpg parser is now automatically generated from the server
        parser (Michael)
       </para>

       <para>
        Previously the ecpg parser was hand-maintained.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

    <sect4>
     <title>Server Programming Interface (<acronym>SPI</>)</title>
     <itemizedlist>

      <listitem>
       <para>
        Add support for single-use plans with out-of-line
        parameters (Tom)
       </para>
      </listitem>

      <listitem>
       <para>
        Add new <varname>SPI_OK_REWRITTEN</> return code for
        <function>SPI_execute()</> (Heikki)
       </para>

       <para>
        This is used when a command is rewritten to another type of
        command.
       </para>
      </listitem>

      <listitem>
       <para>
        Remove unnecessary inclusions from <filename>executor/spi.h</> (Tom)
       </para>

       <para>
        SPI-using modules might need to add some <literal>#include</>
        lines if they were depending on <filename>spi.h</> to include
        things for them.
       </para>
      </listitem>

     </itemizedlist>

    </sect4>

   </sect3>

   <sect3>
    <title>Build Options</title>
    <itemizedlist>

     <listitem>
      <para>
       Update build system to use <productname>Autoconf</> 2.61 (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Require <productname>GNU bison</> for source code builds (Peter)
      </para>

      <para>
       This has effectively been required for several years, but now there
       is no infrastructure claiming to support other parser tools.
      </para>
     </listitem>

     <listitem>
      <para>
       Add <application>pg_config</> <literal>--htmldir</> option
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Pass <type>float4</> by value inside the server (Zoltan
       Boszormenyi)
      </para>

      <para>
       Add <application>configure</> option
       <literal>--disable-float4-byval</> to use the old behavior.
       External C functions that use old-style (version 0) call convention
       and pass or return <type>float4</> values will be broken by this
       change, so you may need the <application>configure</> option if you
       have such functions and don't want to update them.
      </para>
     </listitem>

     <listitem>
      <para>
       Pass <type>float8</>, <type>int8</>, and related datatypes
       by value inside the server on 64-bit platforms (Zoltan Boszormenyi)
      </para>

      <para>
       Add <application>configure</> option
       <literal>--disable-float8-byval</> to use the old behavior.
       As above, this change might break old-style external C functions.
      </para>
     </listitem>

     <listitem>
      <para>
       Add configure options <literal>--with-segsize</>,
       <literal>--with-blocksize</>, <literal>--with-wal-blocksize</>,
       <literal>--with-wal-segsize</> (Zdenek Kotala, Tom)
      </para>

      <para>
       This simplifies build-time control over several constants that
       previously could only be changed by editing
       <filename>pg_config_manual.h</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Allow threaded builds on <productname>Solaris</> 2.5 (Bruce)
      </para>
     </listitem>

     <listitem>
      <para>
       Use the system's <function>getopt_long()</> on <productname>Solaris</>
       (Zdenek Kotala, Tom)
      </para>

      <para>
       This makes option processing more consistent with what Solaris users
       expect.
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for the <productname>Sun Studio</> compiler on
       <productname>Linux</> (Julius Stroffek)
      </para>
     </listitem>

     <listitem>
      <para>
       Append the major version number to the backend <application>gettext</>
       domain, and the <literal>soname</> major version number to
       libraries' <application>gettext</> domain (Peter)
      </para>

      <para>
       This simplifies parallel installations of multiple versions.
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for code coverage testing with <application>gcov</>
       (Michelle Caisse)
      </para>
     </listitem>

     <listitem>
      <para>
       Allow out-of-tree builds on <productname>Mingw</> and
       <productname>Cygwin</> (Richard Evans)
      </para>
     </listitem>

     <listitem>
      <para>
       Fix the use of <productname>Mingw</> as a cross-compiling source
       platform (Peter)
      </para>
     </listitem>

    </itemizedlist>

   </sect3>

   <sect3>
    <title>Source Code</title>
    <itemizedlist>

     <listitem>
      <para>
       Support 64-bit time zone data files (Heikki)
      </para>

      <para>
       This adds support for daylight saving time (<acronym>DST</>)
       calculations beyond the year 2038.
      </para>
     </listitem>

     <listitem>
      <para>
       Deprecate use of platform's <type>time_t</> data type (Tom)
      </para>

      <para>
       Some platforms have migrated to 64-bit <type>time_t</>, some have
       not, and Windows can't make up its mind what it's doing.  Define
       <type>pg_time_t</> to have the same meaning as <type>time_t</>,
       but always be 64 bits (unless the platform has no 64-bit integer type),
       and use that type in all module APIs and on-disk data formats.
      </para>
     </listitem>

     <listitem>
      <para>
       Fix bug in handling of the time zone database when cross-compiling
       (Richard Evans)
      </para>
     </listitem>

     <listitem>
      <para>
       Link backend object files in one step, rather than in stages
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve <application>gettext</> support to allow better translation
       of plurals (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Add message translation support to the PL languages (Alvaro, Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Add more <application>DTrace</> probes (Robert Lor)
      </para>
     </listitem>

     <listitem>
      <para>
       Enable <application>DTrace</> support on <application>Mac OS X
       Leopard</> and other non-Solaris platforms (Robert Lor)
      </para>
     </listitem>

     <listitem>
      <para>
       Simplify and standardize conversions between C strings and
       <type>text</> datums, by providing common functions for the purpose
       (Brendan Jurd, Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Clean up the <filename>include/catalog/</> header files so that
       frontend programs can include them without including
       <filename>postgres.h</>
       (Zdenek Kotala)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <type>name</> char-aligned, and suppress zero-padding of
       <type>name</> entries in indexes (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Recover better if dynamically-loaded code executes <function>exit()</>
       (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add a hook to let plug-ins monitor the executor (Itagaki
       Takahiro)
      </para>
     </listitem>

     <listitem>
      <para>
       Add a hook to allow the planner's statistics lookup behavior to
       be overridden (Simon Riggs)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <function>shmem_startup_hook()</> for custom shared memory
       requirements (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Replace the index access method <function>amgetmulti</> entry point
       with <function>amgetbitmap</>, and extend the API for
       <function>amgettuple</> to support run-time determination of
       operator lossiness (Heikki, Tom, Teodor)
      </para>

      <para>
       The API for GIN and GiST opclass <function>consistent</> functions
       has been extended as well.
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for partial-match searches in <acronym>GIN</> indexes
       (Teodor Sigaev, Oleg Bartunov)
      </para>
     </listitem>

     <listitem>
      <para>
       Replace <structname>pg_class</> column <structfield>reltriggers</>
       with boolean <structfield>relhastriggers</> (Simon)
      </para>

      <para>
       Also remove unused <structname>pg_class</> columns
       <structfield>relukeys</>, <structfield>relfkeys</>, and
       <structfield>relrefs</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Add a <structfield>relistemp</> column to <structname>pg_class</>
       to ease identification of temporary tables (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Move platform <acronym>FAQ</>s into the main documentation
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Prevent parser input files from being built with any conflicts
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for the <literal>KOI8U</> (Ukrainian) encoding
       (Peter)
      </para>
     </listitem>

     <listitem>
      <para>
       Add Japanese message translations (Japan PostgreSQL Users Group)
      </para>

      <para>
       This used to be maintained as a separate project.
      </para>
     </listitem>

     <listitem>
      <para>
       Fix problem when setting <varname>LC_MESSAGES</> on
       <application>MSVC</>-built systems (Hiroshi Inoue, Hiroshi
       Saito, Magnus)
      </para>
     </listitem>

    </itemizedlist>

   </sect3>

   <sect3>
    <title>Contrib</title>

    <itemizedlist>

     <listitem>
      <para>
       Add <filename>contrib/auto_explain</> to automatically run
       <command>EXPLAIN</> on queries exceeding a specified duration
       (Itagaki Takahiro, Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <filename>contrib/btree_gin</> to allow GIN indexes to
       handle more datatypes (Oleg, Teodor)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <filename>contrib/citext</> to provide a case-insensitive,
       multibyte-aware text data type (David Wheeler)
      </para>
     </listitem>

     <listitem>
      <para>
       Add <filename>contrib/pg_stat_statements</> for server-wide
       tracking of statement execution statistics (Itagaki Takahiro)
      </para>
     </listitem>

     <listitem>
      <para>
       Add duration and query mode options to <filename>contrib/pgbench</>
       (Itagaki Takahiro)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <filename>contrib/pgbench</> use table names
       <structname>pgbench_accounts</>, <structname>pgbench_branches</>,
       <structname>pgbench_history</>, and <structname>pgbench_tellers</>,
       rather than just <structname>accounts</>, <structname>branches</>,
       <structname>history</>, and <structname>tellers</> (Tom)
      </para>

      <para>
       This is to reduce the risk of accidentally destroying real data
       by running <application>pgbench</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Fix <filename>contrib/pgstattuple</> to handle tables and
       indexes with over 2 billion pages (Tatsuhito Kasahara)
      </para>
     </listitem>

     <listitem>
      <para>
       In <filename>contrib/fuzzystrmatch</>, add a version of the
       Levenshtein string-distance function that allows the user to
       specify the costs of insertion, deletion, and substitution
       (Volkan Yazici)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <filename>contrib/ltree</> support multibyte encodings
       (laser)
      </para>
     </listitem>

     <listitem>
      <para>
       Enable <filename>contrib/dblink</> to use connection information
       stored in the SQL/MED catalogs (Joe Conway)
      </para>
     </listitem>

     <listitem>
      <para>
       Improve <filename>contrib/dblink</>'s reporting of errors from
       the remote server (Joe Conway)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <filename>contrib/dblink</> set <varname>client_encoding</>
       to match the local database's encoding (Joe Conway)
      </para>

      <para>
       This prevents encoding problems when communicating with a remote
       database that uses a different encoding.
      </para>
     </listitem>

     <listitem>
      <para>
       Make sure <filename>contrib/dblink</> uses a password supplied
       by the user, and not accidentally taken from the server's
       <filename>.pgpass</> file (Joe Conway)
      </para>

      <para>
       This is a minor security enhancement.
      </para>
     </listitem>

     <listitem>
      <para>
       Add <function>fsm_page_contents()</>
       to <filename>contrib/pageinspect</> (Heikki)
      </para>
     </listitem>

     <listitem>
      <para>
       Modify <function>get_raw_page()</> to support free space map
       (<filename>*_fsm</>) files.  Also update
       <filename>contrib/pg_freespacemap</>.
      </para>
     </listitem>

     <listitem>
      <para>
       Add support for multibyte encodings to <filename>contrib/pg_trgm</>
       (Teodor)
      </para>
     </listitem>

     <listitem>
      <para>
       Rewrite <filename>contrib/intagg</> to use new
       functions <function>array_agg()</> and <function>unnest()</>
       (Tom)
      </para>
     </listitem>

     <listitem>
      <para>
       Make <filename>contrib/pg_standby</> recover all available WAL before
       failover (Fujii Masao, Simon, Heikki)
      </para>

      <para>
       To make this work safely, you now need to set the new
       <literal>recovery_end_command</> option in <filename>recovery.conf</>
       to clean up the trigger file after failover. <application>pg_standby</>
       will no longer remove the trigger file itself.
      </para>
     </listitem>

     <listitem>
      <para>
       <filename>contrib/pg_standby</>'s <option>-l</> option is now a no-op,
       because it is unsafe to use a symlink (Simon)
      </para>
     </listitem>

    </itemizedlist>

   </sect3>
  </sect2>
 </sect1>
