<!--
$Header: /cvsroot/pgsql/doc/src/sgml/sql.sgml,v 1.21 2001/05/22 16:00:00 petere Exp $
-->

 <chapter id="sql">
  <title>SQL</title>

  <abstract>
   <para>
    This chapter introduces the mathematical concepts behind
    relational databases. It is not required reading, so if you bog
    down or want to get straight to some simple examples feel free to
    jump ahead to the next chapter and come back when you have more
    time and patience. This stuff is supposed to be fun!
   </para>

   <para>
    This material originally appeared as a part of
    Stefan Simkovics' Master's Thesis
    (<xref linkend="SIM98" endterm="SIM98">).
   </para>
  </abstract>

  <para>
   <acronym>SQL</acronym> has become the most popular relational query 
   language.
   The name "<acronym>SQL</acronym>" is an abbreviation for
   <firstterm>Structured Query Language</firstterm>. 
   In 1974 Donald Chamberlin and others defined the
   language SEQUEL (<firstterm>Structured English Query
    Language</firstterm>) at IBM
   Research. This language was first implemented in an IBM
   prototype called SEQUEL-XRM in 1974-75. In 1976-77 a revised version
   of SEQUEL called SEQUEL/2 was defined and the name was changed to
   <acronym>SQL</acronym>
   subsequently.
  </para>

  <para>
   A new prototype called System R was developed by IBM in 1977. System R
   implemented a large subset of SEQUEL/2 (now <acronym>SQL</acronym>)
   and a number of
   changes were made to <acronym>SQL</acronym> during the project.
   System R was installed in
   a number of user sites, both internal IBM sites and also some selected
   customer sites. Thanks to the success and acceptance of System R at
   those user sites IBM started to develop commercial products that
   implemented the <acronym>SQL</acronym> language based on the System
   R technology.
  </para>

  <para>
   Over the next years IBM and also a number of other vendors announced
   <acronym>SQL</acronym> products such as
   <productname>SQL/DS</productname> (IBM),
   <productname>DB2</productname> (IBM),
   <productname>ORACLE</productname> (Oracle Corp.),
   <productname>DG/SQL</productname> (Data General Corp.),
   and <productname>SYBASE</productname> (Sybase Inc.).
  </para>

  <para>
   <acronym>SQL</acronym> is also an official standard now. In 1982
   the American National
   Standards Institute (<acronym>ANSI</acronym>) chartered its
   Database Committee X3H2 to
   develop a proposal for a standard relational language. This proposal
   was ratified in 1986 and consisted essentially of the IBM dialect of
   <acronym>SQL</acronym>. In 1987 this <acronym>ANSI</acronym> 
   standard was also accepted as an international
   standard by the International Organization for Standardization
   (<acronym>ISO</acronym>).
   This original standard version of <acronym>SQL</acronym> is often
   referred to,
   informally, as "<abbrev>SQL/86</abbrev>". In 1989 the original
   standard was extended
   and this new standard is often, again informally, referred to as
   "<abbrev>SQL/89</abbrev>". Also in 1989, a related standard called
   <firstterm>Database Language Embedded <acronym>SQL</acronym></firstterm>
   (<acronym>ESQL</acronym>) was developed.
  </para>

  <para>
   The <acronym>ISO</acronym> and <acronym>ANSI</acronym> committees
   have been working for many years on the
   definition of a greatly expanded version of the original standard,
   referred to informally as <firstterm><acronym>SQL2</acronym></firstterm>
   or <firstterm><acronym>SQL/92</acronym></firstterm>. This version became a
   ratified standard - "International Standard ISO/IEC 9075:1992,
   Database Language <acronym>SQL</acronym>" - in late 1992.
   <acronym>SQL/92</acronym> is the version
   normally meant when people refer to "the <acronym>SQL</acronym>
   standard". A detailed
   description of <acronym>SQL/92</acronym> is given in 
   <xref linkend="DATE97" endterm="DATE97">. At the time of
   writing this document a new standard informally referred to
   as <firstterm><acronym>SQL3</acronym></firstterm>
   is under development. It is planned to make <acronym>SQL</acronym>
   a Turing-complete
   language, i.e. all computable queries (e.g. recursive queries) will be
   possible. This is a very complex task and therefore the completion of
   the new standard can not be expected before 1999.
  </para>

  <sect1 id="rel-model">
   <title>The Relational Data Model</title>

  <para>
    As mentioned before, <acronym>SQL</acronym> is a relational
    language. That means it is
    based on the <firstterm>relational data model</firstterm>
    first published by E.F. Codd in
    1970. We will give a formal description of the relational model
    later (in
    <xref linkend="formal-notion" endterm="formal-notion">)
    but first we want to have a look at it from a more intuitive
    point of view.
  </para>

  <para>
    A <firstterm>relational database</firstterm> is a database that is 
    perceived by its
    users as a <firstterm>collection of tables</firstterm> (and
    nothing else but tables).
    A table consists of rows and columns where each row represents a
    record and each column represents an attribute of the records
    contained in the table.
    <xref linkend="supplier-fig" endterm="supplier-fig">
    shows an example of a database consisting of three tables:

    <itemizedlist>
     <listitem>
      <para>
       SUPPLIER is a table storing the number
       (SNO), the name (SNAME) and the city (CITY) of a supplier.
      </para>
     </listitem>

     <listitem>
      <para>
       PART is a table storing the number (PNO) the name (PNAME) and
       the price (PRICE) of a part.
      </para>
     </listitem>

     <listitem>
      <para>
       SELLS stores information about which part (PNO) is sold by which
       supplier (SNO). 
       It serves in a sense to connect the other two tables together.
      </para>
     </listitem>
    </itemizedlist>

    <example>
     <title id="supplier-fig">The Suppliers and Parts Database</title>
     <programlisting>
SUPPLIER:                   SELLS:
 SNO |  SNAME  |  CITY       SNO | PNO
----+---------+--------     -----+-----
 1  |  Smith  | London        1  |  1
 2  |  Jones  | Paris         1  |  2
 3  |  Adams  | Vienna        2  |  4
 4  |  Blake  | Rome          3  |  1
                              3  |  3
                              4  |  2
PART:                         4  |  3
 PNO |  PNAME  |  PRICE       4  |  4
----+---------+---------
 1  |  Screw  |   10
 2  |  Nut    |    8
 3  |  Bolt   |   15
 4  |  Cam    |   25
     </programlisting>
    </example>
   </para>

   <para>
    The tables PART and SUPPLIER may be regarded as
    <firstterm>entities</firstterm> and
    SELLS may be regarded as a <firstterm>relationship</firstterm>
    between a particular
    part and a particular supplier. 
   </para>

   <para>
    As we will see later, <acronym>SQL</acronym> operates on tables
    like the ones just
    defined but before that we will study the theory of the relational
    model.
   </para>
  </sect1>

  <sect1 id="relmodel-formal">
   <title id="formal-notion">Relational Data Model Formalities</title>

   <para>
    The mathematical concept underlying the relational model is the
    set-theoretic <firstterm>relation</firstterm> which is a subset of
    the Cartesian
    product of a list of domains. This set-theoretic relation gives
    the model its name (do not confuse it with the relationship from the
    <firstterm>Entity-Relationship model</firstterm>).
    Formally a domain is simply a set of
    values. For example the set of integers is a domain. Also the set of
    character strings of length 20 and the real numbers are examples of
    domains.
   </para>

   <para>
<!--
\begin{definition}
The <firstterm>Cartesian product</firstterm> of domains $D_{1},
    D_{2},\ldots, D_{k}$ written
\mbox{$D_{1} \times D_{2} \times \ldots \times D_{k}$} is the set of
all $k$-tuples $(v_{1},v_{2},\ldots,v_{k})$ such that \mbox{$v_{1} \in
D_{1}, v_{2} \in D_{2}, \ldots, v_{k} \in D_{k}$}.
\end{definition}
-->
    The <firstterm>Cartesian product</firstterm> of domains
    <parameter>D<subscript>1</subscript></parameter>,
    <parameter>D<subscript>2</subscript></parameter>,
    ...
    <parameter>D<subscript>k</subscript></parameter>,
    written
    <parameter>D<subscript>1</subscript></parameter> &times;
    <parameter>D<subscript>2</subscript></parameter> &times;
    ... &times;
    <parameter>D<subscript>k</subscript></parameter>
    is the set of all k-tuples
    <parameter>v<subscript>1</subscript></parameter>,
    <parameter>v<subscript>2</subscript></parameter>,
    ...
    <parameter>v<subscript>k</subscript></parameter>,
    such that
    <parameter>v<subscript>1</subscript></parameter> &isin; 
    <parameter>D<subscript>1</subscript></parameter>,
    <parameter>v<subscript>2</subscript></parameter> &isin; 
    <parameter>D<subscript>2</subscript></parameter>,
    ...
    <parameter>v<subscript>k</subscript></parameter> &isin; 
    <parameter>D<subscript>k</subscript></parameter>.
   </para>

   <para>
    For example, when we have
<!--
 $k=2$, $D_{1}=\{0,1\}$ and
$D_{2}=\{a,b,c\}$, then $D_{1} \times D_{2}$ is
$\{(0,a),(0,b),(0,c),(1,a),(1,b),(1,c)\}$.
-->
    <parameter>k</parameter>=2,
    <parameter>D<subscript>1</subscript></parameter>=<literal>{0,1}</literal> and
    <parameter>D<subscript>2</subscript></parameter>=<literal>{a,b,c}</literal> then
    <parameter>D<subscript>1</subscript></parameter> &times;
    <parameter>D<subscript>2</subscript></parameter> is
    <literal>{(0,a),(0,b),(0,c),(1,a),(1,b),(1,c)}</literal>.
   </para>

   <para>
<!--
\begin{definition}
A Relation is any subset of the Cartesian product of one or more
domains: $R \subseteq$ \mbox{$D_{1} \times D_{2} \times \ldots \times D_{k}$}
\end{definition}
-->
    A Relation is any subset of the Cartesian product of one or more
    domains: <parameter>R</parameter> &sube;
    <parameter>D<subscript>1</subscript></parameter> &times;
    <parameter>D<subscript>2</subscript></parameter> &times;
    ... &times;
    <parameter>D<subscript>k</subscript></parameter>.
   </para>

   <para>
    For example <literal>{(0,a),(0,b),(1,a)}</literal> is a relation;
    it is in fact a subset of
    <parameter>D<subscript>1</subscript></parameter> &times;
    <parameter>D<subscript>2</subscript></parameter>
    mentioned above.
   </para>

   <para>
    The members of a relation are called tuples. Each relation of some
    Cartesian product
    <parameter>D<subscript>1</subscript></parameter> &times;
    <parameter>D<subscript>2</subscript></parameter> &times;
    ... &times;
    <parameter>D<subscript>k</subscript></parameter>
    is said to have arity <literal>k</literal> and is therefore a set
    of <literal>k</literal>-tuples.
   </para>

   <para>
    A relation can be viewed as a table (as we already did, remember
    <xref linkend="supplier-fig" endterm="supplier-fig"> where
    every tuple is represented by a row and every column corresponds to
    one component of a tuple. Giving names (called attributes) to the
    columns leads to the definition of a 
    <firstterm>relation scheme</firstterm>.
   </para>

   <para>
<!--
\begin{definition}
A {\it relation scheme} $R$ is a finite set of attributes
\mbox{$\{A_{1},A_{2},\ldots,A_{k}\}$}. There is a domain $D_{i}$ for
each attribute $A_{i}, 1 \le i \le k$ where the values of the
attributes are taken from. We often write a relation scheme as
\mbox{$R(A_{1},A_{2},\ldots,A_{k})$}.
\end{definition}
-->
    A <firstterm>relation scheme</firstterm> <literal>R</literal> is a 
    finite set of attributes
    <parameter>A<subscript>1</subscript></parameter>,
    <parameter>A<subscript>2</subscript></parameter>,
    ...
    <parameter>A<subscript>k</subscript></parameter>.
    There is a domain
    <parameter>D<subscript>i</subscript></parameter>,
    for each attribute
    <parameter>A<subscript>i</subscript></parameter>,
    1 &lt;= <literal>i</literal> &lt;= <literal>k</literal>,
    where the values of the attributes are taken from. We often write
    a relation scheme as
    <literal>R(<parameter>A<subscript>1</subscript></parameter>,
    <parameter>A<subscript>2</subscript></parameter>,
    ...
    <parameter>A<subscript>k</subscript></parameter>)</literal>.

    <note>
     <para>
      A <firstterm>relation scheme</firstterm> is just a kind of template
      whereas a <firstterm>relation</firstterm> is an instance of a
      <firstterm>relation
       scheme</firstterm>. The relation consists of tuples (and can
      therefore be
      viewed as a table); not so the relation scheme.
     </para>
    </note>
   </para>

   <sect2>
    <title id="domains">Domains vs. Data Types</title>

    <para>
     We often talked about <firstterm>domains</firstterm>
     in the last section. Recall that a
     domain is, formally, just a set of values (e.g., the set of integers or
     the real numbers). In terms of database systems we often talk of
     <firstterm>data types</firstterm> instead of domains.
     When we define a table we have to make
     a decision about which attributes to include. Additionally we
     have to decide which kind of data is going to be stored as
     attribute values. For example the values of
     <classname>SNAME</classname> from the table
     <classname>SUPPLIER</classname> will be character strings,
     whereas <classname>SNO</classname> will store
     integers. We define this by assigning a data type to each
     attribute. The type of <classname>SNAME</classname> will be
     <type>VARCHAR(20)</type> (this is the <acronym>SQL</acronym> type
     for character strings of length &lt;= 20),
     the type of <classname>SNO</classname> will be
     <type>INTEGER</type>. With the assignment of a data type we also
     have selected
     a domain for an attribute. The domain of
     <classname>SNAME</classname> is the set of all
     character strings of length &lt;= 20,
     the domain of <classname>SNO</classname> is the set of
     all integer numbers.
    </para>
   </sect2>
  </sect1>

  <sect1 id="relmodel-oper">
   <title id="operations">Operations in the Relational Data Model</title>

   <para>
    In the previous section
    (<xref linkend="formal-notion" endterm="formal-notion">)
    we defined the mathematical notion of
    the relational model. Now we know how the data can be stored using a
    relational data model but we do not know what to do with all these
    tables to retrieve something from the database yet. For example somebody
    could ask for the names of all suppliers that sell the part
    'Screw'. Therefore two rather different kinds of notations for
    expressing operations on relations have been defined:

    <itemizedlist>
     <listitem>
      <para>
       The <firstterm>Relational Algebra</firstterm> which is an
       algebraic notation,
       where queries are expressed by applying specialized operators to the
       relations.
      </para>
     </listitem>

     <listitem>
      <para>
       The <firstterm>Relational Calculus</firstterm> which is a
       logical notation,
       where queries are expressed by formulating some logical restrictions
       that the tuples in the answer must satisfy.
      </para>
    </listitem>
    </itemizedlist>
   </para>

   <sect2>
    <title id="rel-alg">Relational Algebra</title>

    <para>
     The <firstterm>Relational Algebra</firstterm> was introduced by
     E. F. Codd in 1972. It consists of a set of operations on relations:

     <itemizedlist>
      <listitem>
       <para>
	SELECT (&sigma;): extracts <firstterm>tuples</firstterm> from
	a relation that
	satisfy a given restriction. Let <parameter>R</parameter> be a 
	table that contains an attribute
	<parameter>A</parameter>.
&sigma;<subscript>A=a</subscript>(R) = {t &isin; R &mid; t(A) = a}
	where <literal>t</literal> denotes a
	tuple of <parameter>R</parameter> and <literal>t(A)</literal>
	denotes the value of attribute <parameter>A</parameter> of
	tuple <literal>t</literal>.
       </para>
      </listitem>

      <listitem>
       <para>
	PROJECT (&pi;): extracts specified
	<firstterm>attributes</firstterm> (columns) from a
	relation. Let <classname>R</classname> be a relation
	that contains an attribute <classname>X</classname>.
	&pi;<subscript>X</subscript>(<classname>R</classname>) = {t(X) &mid; t &isin; <classname>R</classname>},
	where <literal>t</literal>(<classname>X</classname>) denotes the value of
	attribute <classname>X</classname> of tuple <literal>t</literal>.
       </para>
      </listitem>

      <listitem>
       <para>
	PRODUCT (&times;): builds the Cartesian product of two
	relations. Let <classname>R</classname> be a table with arity
	<literal>k</literal><subscript>1</subscript> and let
	<classname>S</classname> be a table with
	arity <literal>k</literal><subscript>2</subscript>.
	<classname>R</classname> &times; <classname>S</classname>
	is the set of all 
	<literal>k</literal><subscript>1</subscript>
	+ <literal>k</literal><subscript>2</subscript>-tuples
	whose first <literal>k</literal><subscript>1</subscript>
	components form a tuple in <classname>R</classname> and whose last
	<literal>k</literal><subscript>2</subscript> components form a
	tuple in <classname>S</classname>.
       </para>
      </listitem>

      <listitem>
       <para>
	UNION (&cup;): builds the set-theoretic union of two
	tables. Given the tables <classname>R</classname> and
	<classname>S</classname> (both must have the same arity),
	the union <classname>R</classname> &cup; <classname>S</classname>
	is the set of tuples that are in <classname>R</classname>
	or <classname>S</classname> or both.
       </para>
      </listitem>

      <listitem>
       <para>
	INTERSECT (&cap;): builds the set-theoretic intersection of two
	tables. Given the tables <classname>R</classname> and
	<classname>S</classname>,
	<classname>R</classname> &cap; <classname>S</classname> is the
	set of tuples
	that are in <classname>R</classname> and in
	<classname>S</classname>.
	We again require that <classname>R</classname> and 
	<classname>S</classname> have the
	same arity.
       </para>
      </listitem>

      <listitem>
       <para>
	DIFFERENCE (&minus; or &setmn;): builds the set difference of
	two tables. Let <classname>R</classname> and <classname>S</classname>
	again be two tables with the same
	arity. <classname>R</classname> - <classname>S</classname>
	is the set of tuples in <classname>R</classname> but not in
	<classname>S</classname>.
       </para>
      </listitem>

      <listitem>
       <para>
	JOIN (&prod;): connects two tables by their common
	attributes. Let <classname>R</classname> be a table with the 
	attributes <classname>A</classname>,<classname>B</classname> 
	and <classname>C</classname> and
	let <classname>S</classname> be a table with the attributes
	<classname>C</classname>,<classname>D</classname>
	and <classname>E</classname>. There is one
	attribute common to both relations,
	the attribute <classname>C</classname>. 
<!--
	<classname>R</classname> &prod; <classname>S</classname> =
	&pi;<subscript><classname>R</classname>.<classname>A</classname>,<classname>R</classname>.<classname>B</classname>,<classname>R</classname>.<classname>C</classname>,<classname>S</classname>.<classname>D</classname>,<classname>S</classname>.<classname>E</classname></subscript>(&sigma;<subscript><classname>R</classname>.<classname>C</classname>=<classname>S</classname>.<classname>C</classname></subscript>(<classname>R</classname> &times; <classname>S</classname>)).
-->
	R &prod; S = &pi;<subscript>R.A,R.B,R.C,S.D,S.E</subscript>(&sigma;<subscript>R.C=S.C</subscript>(R &times; S)).
	What are we doing here? We first calculate the Cartesian
	product
	<classname>R</classname> &times; <classname>S</classname>.
	Then we select those tuples whose values for the common
	attribute <classname>C</classname> are equal
	(&sigma;<subscript>R.C = S.C</subscript>).
	Now we have a table
	that contains the attribute <classname>C</classname>
	two times and we correct this by
	projecting out the duplicate column.
       </para>

       <example>
	<title id="join-example">An Inner Join</title>

	<para>
	 Let's have a look at the tables that are produced by evaluating the steps
	 necessary for a join.
	 Let the following two tables be given:

	 <programlisting>
R:                 S:
 A | B | C          C | D | E
---+---+---        ---+---+---
 1 | 2 | 3          3 | a | b
 4 | 5 | 6          6 | c | d
 7 | 8 | 9
	 </programlisting>
	</para>
       </example>

       <para>
	First we calculate the Cartesian product
	<classname>R</classname> &times; <classname>S</classname> and
	get:

	<programlisting>
R x S:
 A | B | R.C | S.C | D | E
---+---+-----+-----+---+---
 1 | 2 |  3  |  3  | a | b
 1 | 2 |  3  |  6  | c | d
 4 | 5 |  6  |  3  | a | b
 4 | 5 |  6  |  6  | c | d
 7 | 8 |  9  |  3  | a | b
 7 | 8 |  9  |  6  | c | d
	</programlisting>
       </para>

       <para>
	After the selection
	&sigma;<subscript>R.C=S.C</subscript>(R &times; S)
	we get:

	<programlisting>
 A | B | R.C | S.C | D | E
---+---+-----+-----+---+---
 1 | 2 |  3  |  3  | a | b
 4 | 5 |  6  |  6  | c | d
	</programlisting>
       </para>

       <para>
	To remove the duplicate column
	<classname>S</classname>.<classname>C</classname>
	we project it out by the following operation:
	&pi;<subscript>R.A,R.B,R.C,S.D,S.E</subscript>(&sigma;<subscript>R.C=S.C</subscript>(R &times; S))
	and get:

	<programlisting>
 A | B | C | D | E
---+---+---+---+---
 1 | 2 | 3 | a | b
 4 | 5 | 6 | c | d
	</programlisting>
       </para>
      </listitem>

      <listitem>
       <para>
	DIVIDE (&divide;): Let <classname>R</classname> be a table
	with the attributes A, B, C, and D and let
	<classname>S</classname> be a table with the attributes
	C and D.
	Then we define the division as:

	<programlisting>
R &divide; S = {t &mid; &forall; t<subscript>s</subscript> &isin; S &exist; t<subscript>r</subscript> &isin; R
	</programlisting>

	such that
t<subscript>r</subscript>(A,B)=t&and;t<subscript>r</subscript>(C,D)=t<subscript>s</subscript>}
	where
	t<subscript>r</subscript>(x,y)
	denotes a
	tuple of table <classname>R</classname> that consists only of
	the components <literal>x</literal> and <literal>y</literal>.
	Note that the tuple <literal>t</literal> only consists of the
	components <classname>A</classname> and
	<classname>B</classname> of relation <classname>R</classname>.
       </para>

       <para id="divide-example">
	Given the following tables

	<programlisting>
R:                    S:
 A | B | C | D         C | D
---+---+---+---       ---+---
 a | b | c | d         c | d
 a | b | e | f         e | f
 b | c | e | f
 e | d | c | d
 e | d | e | f
 a | b | d | e
	</programlisting>

	R &divide; S
	is derived as

	<programlisting>
 A | B
---+---
 a | b
 e | d
	</programlisting>
       </para>
      </listitem>
     </itemizedlist>
    </para>

    <para>
     For a more detailed description and definition of the relational
     algebra refer to [<xref linkend="ULL88" endterm="ULL88">] or
     [<xref linkend="DATE94" endterm="DATE94">].
    </para>

    <example>
     <title id="suppl-rel-alg">A Query Using Relational Algebra</title>
     <para>
      Recall that we formulated all those relational operators to be able to
      retrieve data from the database. Let's return to our example from 
      the previous
      section (<xref linkend="operations" endterm="operations">)
      where someone wanted to know the names of all
      suppliers that sell the part <literal>Screw</literal>. 
      This question can be answered
      using relational algebra by the following operation:

      <programlisting>
&pi;<subscript>SUPPLIER.SNAME</subscript>(&sigma;<subscript>PART.PNAME='Screw'</subscript>(SUPPLIER &prod; SELLS &prod; PART))
      </programlisting>
     </para>

     <para>
      We call such an operation a query. If we evaluate the above query
      against the our example tables
      (<xref linkend="supplier-fig" endterm="supplier-fig">)
      we will obtain the following result:

      <programlisting>
 SNAME
-------
 Smith
 Adams
      </programlisting>
     </para>
    </example>
   </sect2>

   <sect2 id="rel-calc">
    <title>Relational Calculus</title>

    <para>
     The relational calculus is based on the
     <firstterm>first order logic</firstterm>. There are
     two variants of the relational calculus:

     <itemizedlist>
      <listitem>
       <para>
	The <firstterm>Domain Relational Calculus</firstterm>
	(<acronym>DRC</acronym>), where variables
	stand for components (attributes) of the tuples.
       </para>
      </listitem>

      <listitem>
       <para>
	The <firstterm>Tuple Relational Calculus</firstterm>
	(<acronym>TRC</acronym>), where variables stand for tuples.
       </para>
      </listitem>
     </itemizedlist>
    </para>

    <para>
     We want to discuss the tuple relational calculus only because it is
     the one underlying the most relational languages. For a detailed
     discussion on <acronym>DRC</acronym> (and also
     <acronym>TRC</acronym>) see
     <xref linkend="DATE94" endterm="DATE94">
     or
     <xref linkend="ULL88" endterm="ULL88">.
    </para>
   </sect2>

   <sect2>
    <title>Tuple Relational Calculus</title>

    <para>
     The queries used in <acronym>TRC</acronym> are of the following
     form:

     <programlisting>
x(A) &mid; F(x)
     </programlisting>

     where <literal>x</literal> is a tuple variable
     <classname>A</classname> is a set of attributes and <literal>F</literal> is a
     formula. The resulting relation consists of all tuples
     <literal>t(A)</literal> that satisfy <literal>F(t)</literal>.
    </para>

    <para>
     If we want to answer the question from example
     <xref linkend="suppl-rel-alg" endterm="suppl-rel-alg">
     using <acronym>TRC</acronym> we formulate the following query:

     <programlisting>
{x(SNAME) &mid; x &isin; SUPPLIER &and;
    &exist; y &isin; SELLS &exist; z &isin; PART (y(SNO)=x(SNO) &and;
    z(PNO)=y(PNO) &and;
    z(PNAME)='Screw')}
     </programlisting>
    </para>

    <para>
     Evaluating the query against the tables from
     <xref linkend="supplier-fig" endterm="supplier-fig">
     again leads to the same result
     as in
     <xref linkend="suppl-rel-alg" endterm="suppl-rel-alg">.
    </para>
   </sect2>

   <sect2 id="alg-vs-calc">
    <title>Relational Algebra vs. Relational Calculus</title>

    <para>
     The relational algebra and the relational calculus have the same
     <firstterm>expressive power</firstterm>; i.e. all queries that
     can be formulated using relational algebra can also be formulated 
     using the relational calculus and vice versa.
     This was first proved by E. F. Codd in
     1972. This proof is based on an algorithm ("Codd's reduction
     algorithm") by which an arbitrary expression of the relational
     calculus can be reduced to a semantically equivalent expression of
     relational algebra. For a more detailed discussion on that refer to
     <xref linkend="DATE94" endterm="DATE94">
     and
     <xref linkend="ULL88" endterm="ULL88">.
    </para>

    <para>
     It is sometimes said that languages based on the relational calculus
     are "higher level" or "more declarative" than languages based on
     relational algebra because the algebra (partially) specifies the order
     of operations while the calculus leaves it to a compiler or
     interpreter to determine the most efficient order of evaluation.
    </para>
   </sect2>
  </sect1>

  <sect1 id="sql-language">
   <title>The <acronym>SQL</acronym> Language</title>

   <para>
    As is the case with most modern relational languages,
    <acronym>SQL</acronym> is based on the tuple
    relational calculus. As a result every query that can be formulated
    using the tuple relational calculus (or equivalently, relational
    algebra) can also be formulated using
    <acronym>SQL</acronym>. There are, however,
    capabilities beyond the scope of relational algebra or calculus. Here
    is a list of some additional features provided by
    <acronym>SQL</acronym> that are not
    part of relational algebra or calculus:

    <itemizedlist>
     <listitem>
      <para>
       Commands for insertion, deletion or modification of data.
      </para>
     </listitem>

     <listitem>
      <para>
       Arithmetic capability: In <acronym>SQL</acronym> it is possible
       to involve
       arithmetic operations as well as comparisons, e.g.

       <programlisting>
A &lt; B + 3.
       </programlisting>

       Note
       that + or other arithmetic operators appear neither in relational
       algebra nor in relational calculus.
      </para>
     </listitem>

     <listitem>
      <para>
       Assignment and Print Commands: It is possible to print a
       relation constructed by a query and to assign a computed relation to a
       relation name.
      </para>
     </listitem>

     <listitem>
      <para>
       Aggregate Functions: Operations such as
       <firstterm>average</firstterm>, <firstterm>sum</firstterm>,
       <firstterm>max</firstterm>, etc. can be applied to columns of a 
       relation to
       obtain a single quantity.
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <sect2 id="select">
    <title id="select-title">Select</title>

    <para>
     The most often used command in <acronym>SQL</acronym> is the
     SELECT statement,
     used to retrieve data. The syntax is:

     <synopsis>
SELECT [ ALL | DISTINCT [ ON ( <replaceable class="PARAMETER">expression</replaceable> [, ...] ) ] ]
    * | <replaceable class="PARAMETER">expression</replaceable> [ AS <replaceable class="PARAMETER">output_name</replaceable> ] [, ...]
    [ INTO [ TEMPORARY | TEMP ] [ TABLE ] <replaceable class="PARAMETER">new_table</replaceable> ]
    [ FROM <replaceable class="PARAMETER">from_item</replaceable> [, ...] ]
    [ WHERE <replaceable class="PARAMETER">condition</replaceable> ]
    [ GROUP BY <replaceable class="PARAMETER">expression</replaceable> [, ...] ]
    [ HAVING <replaceable class="PARAMETER">condition</replaceable> [, ...] ]
    [ { UNION | INTERSECT | EXCEPT [ ALL ] } <replaceable class="PARAMETER">select</replaceable> ]
    [ ORDER BY <replaceable class="PARAMETER">expression</replaceable> [ ASC | DESC | USING <replaceable class="PARAMETER">operator</replaceable> ] [, ...] ]
    [ FOR UPDATE [ OF <replaceable class="PARAMETER">class_name</replaceable> [, ...] ] ]
    [ LIMIT { <replaceable class="PARAMETER">count</replaceable> | ALL } [ { OFFSET | , } <replaceable class="PARAMETER">start</replaceable> ]]
     </synopsis>
    </para>

    <para>
     Now we will illustrate the complex syntax of the SELECT statement
     with various examples. The tables used for the examples are defined in
     <xref linkend="supplier-fig" endterm="supplier-fig">.
    </para>

    <sect3>
     <title>Simple Selects</title>

     <para>
      Here are some simple examples using a SELECT statement:

      <example>
       <title id="simple-query">Simple Query with Qualification</title>
       <para>
	To retrieve all tuples from table PART where the attribute PRICE is
	greater than 10 we formulate the following query:

	<programlisting>
SELECT * FROM PART
    WHERE PRICE > 10;
	</programlisting>

	and get the table:

	<programlisting>
 PNO |  PNAME  |  PRICE
-----+---------+--------
  3  |  Bolt   |   15
  4  |  Cam    |   25
	</programlisting>
       </para>

       <para>
	Using "*" in the SELECT statement will deliver all attributes from
	the table. If we want to retrieve only the attributes PNAME and PRICE
	from table PART we use the statement:

	<programlisting>
SELECT PNAME, PRICE 
    FROM PART
    WHERE PRICE > 10;
	</programlisting>

	In this case the result is:

	<programlisting>
                      PNAME  |  PRICE
                     --------+--------
                      Bolt   |   15
                      Cam    |   25
	</programlisting>

	Note that the <acronym>SQL</acronym> SELECT corresponds to the 
	"projection" in relational algebra not to the "selection"
	(see <xref linkend="rel-alg" endterm="rel-alg"> for more details).
       </para>

       <para>
	The qualifications in the WHERE clause can also be logically connected
	using the keywords OR, AND, and NOT:

	<programlisting>
SELECT PNAME, PRICE 
    FROM PART
    WHERE PNAME = 'Bolt' AND
         (PRICE = 0 OR PRICE <= 15);
	</programlisting>

	will lead to the result:

	<programlisting>
 PNAME  |  PRICE
--------+--------
 Bolt   |   15
	</programlisting>
       </para>

       <para>
	Arithmetic operations may be used in the target list and in the WHERE
	clause. For example if we want to know how much it would cost if we
	take two pieces of a part we could use the following query:

	<programlisting>
SELECT PNAME, PRICE * 2 AS DOUBLE
    FROM PART
    WHERE PRICE * 2 < 50;
	</programlisting>

	and we get:

	<programlisting>
 PNAME  |  DOUBLE
--------+---------
 Screw  |    20
 Nut    |    16
 Bolt   |    30
	</programlisting>

	Note that the word DOUBLE after the keyword AS is the new title of the
	second column. This technique can be used for every element of the
	target list to assign a new title to the resulting
	column. This new title
	is often referred to as alias. The alias cannot be used throughout the
	rest of the query.
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Joins</title>

     <para id="simple-join">
      The following example shows how <firstterm>joins</firstterm> are
      realized in <acronym>SQL</acronym>.
     </para>

     <para>
      To join the three tables SUPPLIER, PART and SELLS over their common
      attributes we formulate the following statement:

      <programlisting>
SELECT S.SNAME, P.PNAME
    FROM SUPPLIER S, PART P, SELLS SE
    WHERE S.SNO = SE.SNO AND
          P.PNO = SE.PNO;
      </programlisting>

      and get the following table as a result:

      <programlisting>
 SNAME | PNAME
-------+-------
 Smith | Screw
 Smith | Nut
 Jones | Cam
 Adams | Screw
 Adams | Bolt
 Blake | Nut
 Blake | Bolt
 Blake | Cam
      </programlisting>
     </para>

     <para>
      In the FROM clause we introduced an alias name for every relation
      because there are common named attributes (SNO and PNO) among the
      relations. Now we can distinguish between the common named attributes
      by simply prefixing the attribute name with the alias name followed by
      a dot. The join is calculated in the same way as shown in 
      <xref linkend="join-example" endterm="join-example">.
      First the Cartesian product

      SUPPLIER &times; PART &times; SELLS

      is derived. Now only those tuples satisfying the
      conditions given in the WHERE clause are selected (i.e. the common
      named attributes have to be equal). Finally we project out all
      columns but S.SNAME and P.PNAME. 
     </para>

	 <para>
	 Another way to perform joins is to use the SQL JOIN syntax as follows:
	 <programlisting>
select sname, pname from supplier
	JOIN sells USING (sno)
	JOIN part USING (pno);
	</programlisting>
	giving again:
	<programlisting>
 sname | pname
-------+-------
 Smith | Screw
 Adams | Screw
 Smith | Nut
 Blake | Nut
 Adams | Bolt
 Blake | Bolt
 Jones | Cam
 Blake | Cam
(8 rows) 
	 </programlisting>
	 </para>

	 <para>
	 A joined table, created using JOIN syntax, is a table reference list
	 item that occurs in a FROM clause and before any WHERE, GROUP BY,
	 or HAVING clause.  Other table references, including table names or
	 other JOIN clauses, may be included in the FROM clause if separated
	 by commas.  JOINed tables are logically like any other
	 table listed in the FROM clause.
	 </para>

	 <para>
	  SQL JOINs come in two main types, CROSS JOINs (unqualified joins)
	  and <firstterm>qualified JOINs</>.  Qualified joins can be further
	  subdivided based on the way in which the <firstterm>join condition</>
	  is specified (ON, USING, or NATURAL) and the way in which it is
	  applied (INNER or OUTER join).
	 </para>

    <variablelist>
        <title>Join Types</title>
        <varlistentry>
            <term>CROSS JOIN</term>
	        <listitem>
			<cmdsynopsis>
			    <arg choice="req"> <replaceable class="parameter">T1</replaceable> </arg>
			    <command> CROSS JOIN </command>
			    <arg choice="req"> <replaceable class="parameter">T2</replaceable> </arg>
            </cmdsynopsis>

			<para>
			A cross join takes two tables T1 and T2 having N and M rows
			respectively, and returns a joined table containing all
			N*M possible joined rows. For each row R1 of T1, each row
			R2 of T2 is joined with R1 to yield a joined table row JR
			consisting of all fields in R1 and R2. A CROSS JOIN is
			equivalent to an INNER JOIN ON TRUE.
			</para>
			</listitem>
		</varlistentry>

		<varlistentry>
		    <term>Qualified JOINs</term>
		    <listitem>

			<cmdsynopsis>
			<arg choice="req"> <replaceable class="parameter">T1</replaceable> </arg>
			<arg choice="opt"> NATURAL </arg>
			<group choice="opt">
				<arg choice="opt"> INNER </arg>
				<arg>
				<group choice="req">
					<arg choice="plain"> LEFT </arg>
					<arg choice="plain"> RIGHT </arg>
					<arg choice="plain"> FULL </arg>
				</group>
				<arg choice="opt"> OUTER </arg>
      				</arg>
     			</group>
			<command> JOIN </command>
			<arg choice="req"> <replaceable class="parameter">T2</replaceable> </arg>
			<group choice="req">
				<arg> ON <replaceable>search condition</replaceable></arg>
				<arg> USING ( <replaceable>join column list</replaceable> ) </arg>
			</group>
			</cmdsynopsis>

			<para>
			A qualified JOIN must specify its join condition
			by providing one (and only one) of NATURAL, ON, or
			USING.  The ON clause
			takes a <replaceable>search condition</replaceable>,
			which is the same as in a WHERE clause.  The USING
			clause takes a comma-separated list of column names,
			which the joined tables must have in common, and joins
			the tables on equality of those columns.  NATURAL is
			shorthand for a USING clause that lists all the common
			column names of the two tables.  A side-effect of both
			USING and NATURAL is that only one copy of each joined
			column is emitted into the result table (compare the
			relational-algebra definition of JOIN, shown earlier).
			</para>

			<!-- begin join semantics -->
			<variablelist>
			<varlistentry>
				<term>
					<cmdsynopsis>
						<arg> INNER </arg>
						<command> JOIN </command>
					</cmdsynopsis>
				</term>
				<listitem>
				<para>
				For each row R1 of T1, the joined table has a row for each row
				in T2 that satisfies the join condition with R1. 
				</para>
				<tip>
				<para>
					The words INNER and OUTER are optional for all JOINs.
					INNER is the default.  LEFT, RIGHT, and FULL imply an
					OUTER JOIN.
					</para>
				</tip>
				</listitem>
    		</varlistentry>
			<varlistentry>
				<term>
					<cmdsynopsis>
						<arg choice="plain"> LEFT </arg>
						<arg> OUTER </arg>
						<command> JOIN </command>
					</cmdsynopsis>
     			</term>
				<listitem>
				<para>
                First, an INNER JOIN is performed.
                Then, for each row in T1 that does not satisfy the join
				condition with any row in T2, an additional joined row is
				returned with null fields in the columns from T2.
				</para>
				<tip>
					<para>
					The joined table unconditionally has a row for each row in T1.
					</para>
				</tip>
				</listitem>
			</varlistentry>
			<varlistentry>
				<term>
					<cmdsynopsis>
						<arg choice="plain"> RIGHT </arg>
						<arg> OUTER </arg>
						<command> JOIN </command>
      				</cmdsynopsis>
          		</term>
				<listitem>
				<para>
                First, an INNER JOIN is performed.
                Then, for each row in T2 that does not satisfy the join
				condition with any row in T1, an additional joined row is
				returned with null fields in the columns from T1.
				</para>
				<tip>
					<para>
					The joined table unconditionally has a row for each row in T2.
					</para>
				</tip>
				</listitem>
    		</varlistentry>
			<varlistentry>
				<term>
					<cmdsynopsis>
						<arg choice="plain"> FULL </arg>
						<arg> OUTER </arg>
						<command> JOIN </command>
      				</cmdsynopsis>
          		</term>
            	<listitem>
				<para>
                First, an INNER JOIN is performed.
                Then, for each row in T1 that does not satisfy the join
				condition with any row in T2, an additional joined row is
				returned with null fields in the columns from T2.
                Also, for each row in T2 that does not satisfy the join
				condition with any row in T1, an additional joined row is
				returned with null fields in the columns from T1.
				</para>
				<tip>
					<para>
        			The joined table unconditionally has a row for every row of T1
					and a row for every row of T2.
					</para>
				</tip>
				</listitem>
    		</varlistentry>
			</variablelist>
			<!-- end join semantics -->

			</listitem>
        </varlistentry>
	 </variablelist>

	 <para>
	 JOINs of all types can be chained together or nested where either or both of
	 <replaceable class="parameter">T1</replaceable> and
	 <replaceable class="parameter">T2</replaceable> may be JOINed tables.
	 Parenthesis can be used around JOIN clauses to control the order
	 of JOINs which are otherwise processed left to right.
	 </para>

    </sect3>

    <sect3>
     <title id="aggregates-tutorial">Aggregate Operators</title>

     <para>
      <acronym>SQL</acronym> provides aggregate operators
      (e.g. AVG, COUNT, SUM, MIN, MAX) that
      take an expression as argument.  The expression is evaluated at
      each row that satisfies the WHERE clause, and the aggregate operator
      is calculated over this set of input values.  Normally, an aggregate
      delivers a single result for a whole SELECT statement.  But if
      grouping is specified in the query, then a separate calculation is done
      over the rows of each group, and an aggregate result is delivered per
      group (see next section).

      <example>
       <title id="aggregates-example">Aggregates</title>

       <para>
	If we want to know the average cost of all parts in table PART we use
	the following query:

	<programlisting>
SELECT AVG(PRICE) AS AVG_PRICE
    FROM PART;
	</programlisting>
       </para>

       <para>
	The result is:

	<programlisting>
 AVG_PRICE
-----------
   14.5
	</programlisting>
       </para>

       <para>
	If we want to know how many parts are defined in table PART we use
	the statement:

	<programlisting>
SELECT COUNT(PNO)
    FROM PART;
	</programlisting>

	and get:

	<programlisting>
 COUNT
-------
   4
	</programlisting>

       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Aggregation by Groups</title>

     <para>
      <acronym>SQL</acronym> allows one to partition the tuples of a table
      into groups. Then the
      aggregate operators described above can be applied to the groups ---
      i.e. the value of the aggregate operator is no longer calculated over
      all the values of the specified column but over all values of a
      group. Thus the aggregate operator is evaluated separately for every
      group.
     </para>

     <para>
      The partitioning of the tuples into groups is done by using the
      keywords <command>GROUP BY</command> followed by a list of
      attributes that define the
      groups. If we have 
      <command>GROUP BY A<subscript>1</subscript>, &tdot;, A<subscript>k</subscript></command>
      we partition
      the relation into groups, such that two tuples are in the same group
      if and only if they agree on all the attributes 
      A<subscript>1</subscript>, &tdot;, A<subscript>k</subscript>.

      <example>
       <title id="aggregates-groupby">Aggregates</title>
       <para>
	If we want to know how many parts are sold by every supplier we
	formulate the query:

	<programlisting>
SELECT S.SNO, S.SNAME, COUNT(SE.PNO)
    FROM SUPPLIER S, SELLS SE
    WHERE S.SNO = SE.SNO
    GROUP BY S.SNO, S.SNAME;
	</programlisting>

	and get:

	<programlisting>
 SNO | SNAME | COUNT
-----+-------+-------
  1  | Smith |   2
  2  | Jones |   1
  3  | Adams |   2
  4  | Blake |   3
	</programlisting>
       </para>

       <para>
	Now let's have a look of what is happening here.
	First the join of the
	tables SUPPLIER and SELLS is derived:

	<programlisting>
 S.SNO | S.SNAME | SE.PNO
-------+---------+--------
   1   |  Smith  |   1
   1   |  Smith  |   2
   2   |  Jones  |   4
   3   |  Adams  |   1
   3   |  Adams  |   3
   4   |  Blake  |   2
   4   |  Blake  |   3
   4   |  Blake  |   4
	</programlisting>
       </para>

       <para>
	Next we partition the tuples into groups by putting all tuples
	together that agree on both attributes S.SNO and S.SNAME:

	<programlisting>
 S.SNO | S.SNAME | SE.PNO
-------+---------+--------
   1   |  Smith  |   1
                 |   2
--------------------------
   2   |  Jones  |   4
--------------------------
   3   |  Adams  |   1
                 |   3
--------------------------
   4   |  Blake  |   2
                 |   3
                 |   4
	</programlisting>
       </para>

       <para>
	In our example we got four groups and now we can apply the aggregate
	operator COUNT to every group leading to the final result of the query
	given above.
       </para>
      </example>
     </para>

     <para>
      Note that for a query using GROUP BY and aggregate
      operators to make sense the target list can only refer directly to
      the attributes being grouped by.  Other attributes may only be used
      inside the argument of an aggregate function.  Otherwise there would
      not be a unique value to associate with the other attributes.
     </para>

     <para>
      Also observe that it makes no sense to ask for an aggregate of an
      aggregate, e.g., AVG(MAX(sno)), because a SELECT only does one pass
      of grouping and aggregation.  You can get a result of this kind by
      using a temporary table or a sub-SELECT in the FROM clause to
      do the first level of aggregation.
     </para>
    </sect3>

    <sect3>
     <title>Having</title>

     <para>
      The HAVING clause works much like the WHERE clause and is used to
      consider only those groups satisfying the qualification given in the
      HAVING clause.  Essentially, WHERE filters out unwanted input rows
      before grouping and aggregation are done, whereas HAVING filters out
      unwanted group rows post-GROUP.  Therefore, WHERE cannot refer to the
      results of aggregate functions.  On the other hand, there's no point
      in writing a HAVING condition that doesn't involve an aggregate
      function!  If your condition doesn't involve aggregates, you might
      as well write it in WHERE, and thereby avoid the computation of
      aggregates for groups that you're just going to throw away anyway.

      <example>
       <title id="having-example">Having</title>

       <para>
	If we want only those suppliers selling more than one part we use the
	query:

	<programlisting>
SELECT S.SNO, S.SNAME, COUNT(SE.PNO)
    FROM SUPPLIER S, SELLS SE
    WHERE S.SNO = SE.SNO
    GROUP BY S.SNO, S.SNAME
    HAVING COUNT(SE.PNO) > 1;
	</programlisting>

	and get:

	<programlisting>
 SNO | SNAME | COUNT
-----+-------+-------
  1  | Smith |   2
  3  | Adams |   2
  4  | Blake |   3
	</programlisting>
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Subqueries</title>

     <para>
      In the WHERE and HAVING clauses the use of subqueries (subselects) is
      allowed in every place where a value is expected. In this case the
      value must be derived by evaluating the subquery first. The usage of
      subqueries extends the expressive power of
      <acronym>SQL</acronym>.

      <example>
       <title id="subselect-example">Subselect</title>

       <para>
	If we want to know all parts having a greater price than the part
	named 'Screw' we use the query:

	<programlisting>
SELECT * 
    FROM PART 
    WHERE PRICE > (SELECT PRICE FROM PART
                   WHERE PNAME='Screw');
	</programlisting>
       </para>

       <para>
	The result is:

	<programlisting>
 PNO |  PNAME  |  PRICE
-----+---------+--------
  3  |  Bolt   |   15
  4  |  Cam    |   25
	</programlisting>
       </para>

       <para>
	When we look at the above query we can see
	the keyword SELECT two times. The first one at the beginning of the
	query - we will refer to it as outer SELECT - and the one in the WHERE
	clause which begins a nested query - we will refer to it as inner
	SELECT. For every tuple of the outer SELECT the inner SELECT has to be
	evaluated. After every evaluation we know the price of the tuple named
	'Screw' and we can check if the price of the actual tuple is
	greater.  (Actually, in this example the inner query need only be
	evaluated once, since it does not depend on the state of the outer
	query.)
       </para>

       <para>
	If we want to know all suppliers that do not sell any part 
	(e.g. to be able to remove these suppliers from the database) we use:

	<programlisting>
SELECT * 
    FROM SUPPLIER S
    WHERE NOT EXISTS
        (SELECT * FROM SELLS SE
         WHERE SE.SNO = S.SNO);
	</programlisting>
       </para>

       <para>
	In our example the result will be empty because every supplier sells
	at least one part. Note that we use S.SNO from the outer SELECT within
	the WHERE clause of the inner SELECT. Here the subquery must be
	evaluated afresh for each tuple from the outer query, i.e. the value for
	S.SNO is always taken from the current tuple of the outer SELECT. 
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Subqueries in FROM</title>

     <para>
      A somewhat different way of using subqueries is to put them in the
      FROM clause.  This is a useful feature because a subquery of this
      kind can output multiple columns and rows, whereas a subquery used
      in an expression must deliver just a single result.  It also lets
      us get more than one round of grouping/aggregation without resorting
      to a temporary table.

      <example>
       <title id="subselect-in-from-example">Subselect in FROM</title>

       <para>
        If we want to know the highest average part price among all our
	suppliers, we can't write MAX(AVG(PRICE)), but we can write:

	<programlisting>
SELECT MAX(subtable.avgprice)
    FROM (SELECT AVG(P.PRICE) AS avgprice
          FROM SUPPLIER S, PART P, SELLS SE
          WHERE S.SNO = SE.SNO AND
                P.PNO = SE.PNO
          GROUP BY S.SNO) subtable;
	</programlisting>

	The subquery returns one row per supplier (because of its GROUP BY)
	and then we aggregate over those rows in the outer query.
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Union, Intersect, Except</title>

     <para>
      These operations calculate the union, intersection and set theoretic
      difference of the tuples derived by two subqueries.

      <example>
       <title id="union-example">Union, Intersect, Except</title>

       <para>
	The following query is an example for UNION:

	<programlisting>
SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNAME = 'Jones'
UNION
    SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNAME = 'Adams';    
	</programlisting>

gives the result:

	<programlisting>
 SNO | SNAME |  CITY
-----+-------+--------
  2  | Jones | Paris
  3  | Adams | Vienna
	</programlisting>
       </para>

       <para>
	Here is an example for INTERSECT:

	<programlisting>
SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNO > 1
INTERSECT
    SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNO < 3;
	</programlisting>

	gives the result:

	<programlisting>
 SNO | SNAME |  CITY
-----+-------+--------
  2  | Jones | Paris
	</programlisting>

	The only tuple returned by both parts of the query is the one having SNO=2.
       </para>

       <para>
	Finally an example for EXCEPT:

	<programlisting>
SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNO > 1
EXCEPT
    SELECT S.SNO, S.SNAME, S.CITY
    FROM SUPPLIER S
    WHERE S.SNO > 3;
	</programlisting>

	gives the result:

	<programlisting>
 SNO | SNAME |  CITY
-----+-------+--------
  2  | Jones | Paris
  3  | Adams | Vienna
	</programlisting>
       </para>
      </example>
     </para>
    </sect3>
   </sect2>

   <sect2 id="datadef">
    <title>Data Definition</title>

    <para>
     There is a set of commands used for data definition included in the
     <acronym>SQL</acronym> language. 
    </para>

    <sect3 id="create">
     <title id="create-title">Create Table</title>

     <para>
      The most fundamental command for data definition is the
      one that creates a new relation (a new table). The syntax of the
      CREATE TABLE command is:

      <synopsis>
CREATE TABLE <replaceable class="parameter">table_name</replaceable>
    (<replaceable class="parameter">name_of_attr_1</replaceable> <replaceable class="parameter">type_of_attr_1</replaceable>
     [, <replaceable class="parameter">name_of_attr_2</replaceable> <replaceable class="parameter">type_of_attr_2</replaceable> 
     [, ...]]);
      </synopsis>

      <example>
       <title id="table-create">Table Creation</title>

       <para>
	To create the tables defined in
	<xref linkend="supplier-fig" endterm="supplier-fig"> the
	following <acronym>SQL</acronym> statements are used:

	<programlisting>
CREATE TABLE SUPPLIER
    (SNO   INTEGER,
     SNAME VARCHAR(20),
     CITY  VARCHAR(20));
     </programlisting>

     <programlisting>
CREATE TABLE PART
    (PNO   INTEGER,
     PNAME VARCHAR(20),
     PRICE DECIMAL(4 , 2));
     </programlisting>

     <programlisting>
CREATE TABLE SELLS
    (SNO INTEGER,
     PNO INTEGER);
	</programlisting>
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Data Types in <acronym>SQL</acronym></title>

     <para>
      The following is a list of some data types that are supported by 
      <acronym>SQL</acronym>:

      <itemizedlist>
       <listitem>
	<para>
	 INTEGER: signed fullword binary integer (31 bits precision).
	</para>
       </listitem>

       <listitem>
	<para>
	 SMALLINT: signed halfword binary integer (15 bits precision).
	</para>
       </listitem>

       <listitem>
	<para>
	 DECIMAL (<replaceable class="parameter">p</replaceable>[,<replaceable class="parameter">q</replaceable>]):
	 signed packed decimal number of up to
	 <replaceable class="parameter">p</replaceable>
	 digits, with
	 <replaceable class="parameter">q</replaceable>
	 digits to the right of the decimal point.
	 If <replaceable class="parameter">q</replaceable>
	 is omitted it is assumed to be 0.
	</para>
       </listitem>

       <listitem>
	<para>
	 FLOAT: signed doubleword floating point number.
	</para>
       </listitem>

       <listitem>
	<para>
	 CHAR(<replaceable class="parameter">n</replaceable>):
	 fixed length character string of length
	 <replaceable class="parameter">n</replaceable>.
	</para>
       </listitem>

       <listitem>
	<para>
	 VARCHAR(<replaceable class="parameter">n</replaceable>):
	 varying length character string of maximum length
	 <replaceable class="parameter">n</replaceable>.
	</para>
       </listitem>
      </itemizedlist>
     </para>
    </sect3>

    <sect3>
     <title>Create Index</title>

     <para>
      Indexes are used to speed up access to a relation. If a relation <classname>R</classname>
      has an index on attribute <classname>A</classname> then we can
      retrieve all tuples <replaceable>t</replaceable>
      having
      <replaceable>t</replaceable>(<classname>A</classname>) = <replaceable>a</replaceable>
      in time roughly proportional to the number of such
      tuples <replaceable>t</replaceable>
      rather than in time proportional to the size of <classname>R</classname>.
     </para>

     <para>
      To create an index in <acronym>SQL</acronym>
      the CREATE INDEX command is used. The syntax is:

      <programlisting>
CREATE INDEX <replaceable class="parameter">index_name</replaceable> 
    ON <replaceable class="parameter">table_name</replaceable> ( <replaceable class="parameter">name_of_attribute</replaceable> );
      </programlisting>
     </para>

     <para>
      <example>
       <title id="index-create">Create Index</title>

       <para>
	To create an index named I on attribute SNAME of relation SUPPLIER
	we use the following statement:

      <programlisting>
CREATE INDEX I ON SUPPLIER (SNAME);
      </programlisting>
     </para>

       <para>
	The created index is maintained automatically, i.e. whenever a new tuple
	is inserted into the relation SUPPLIER the index I is adapted. Note
	that the only changes a user can perceive when an index is present
	are increased speed for SELECT and decreases in speed of updates.
       </para>
      </example>
     </para>
    </sect3>

    <sect3>
     <title>Create View</title>

     <para>
      A view may be regarded as a <firstterm>virtual table</firstterm>,
      i.e. a table that
      does not <emphasis>physically</emphasis> exist in the database
      but looks to the user
      as if it does. By contrast, when we talk of a
      <firstterm>base table</firstterm> there is
      really a physically stored counterpart of each row of the table
      somewhere in the physical storage.
     </para>

     <para>
      Views do not have their own, physically separate, distinguishable
      stored data. Instead, the system stores the definition of the
      view (i.e. the rules about how to access physically stored base
      tables in order to materialize the view) somewhere in the system
      catalogs (see
      <xref linkend="tutorial-catalogs-title" endterm="tutorial-catalogs-title">). For a
      discussion on different techniques to implement views refer to
<!--
      section
      <xref linkend="view-impl" endterm="view-impl">.
-->
      <citetitle>SIM98</citetitle>.
     </para>

     <para>
      In <acronym>SQL</acronym> the <command>CREATE VIEW</command>
      command is used to define a view. The syntax
      is:

      <programlisting>
CREATE VIEW <replaceable class="parameter">view_name</replaceable>
    AS <replaceable class="parameter">select_stmt</replaceable>
      </programlisting>

      where <replaceable class="parameter">select_stmt</replaceable> 
      is a valid select statement as defined
      in <xref linkend="select-title" endterm="select-title">.
      Note that <replaceable class="parameter">select_stmt</replaceable> is
      not executed when the view is created. It is just stored in the 
      <firstterm>system catalogs</firstterm>
      and is executed whenever a query against the view is made.
     </para>

     <para>
      Let the following view definition be given (we use
      the tables from
      <xref linkend="supplier-fig" endterm="supplier-fig"> again):

      <programlisting>
CREATE VIEW London_Suppliers
    AS SELECT S.SNAME, P.PNAME
        FROM SUPPLIER S, PART P, SELLS SE
        WHERE S.SNO = SE.SNO AND
              P.PNO = SE.PNO AND
              S.CITY = 'London';
      </programlisting>
     </para>

     <para>
      Now we can use this <firstterm>virtual relation</firstterm>
      <classname>London_Suppliers</classname> as
      if it were another base table:

      <programlisting>
SELECT * FROM London_Suppliers
    WHERE PNAME = 'Screw';
      </programlisting>

      which will return the following table:

      <programlisting>
 SNAME | PNAME
-------+-------
 Smith | Screw                 
      </programlisting>
     </para>

     <para>
      To calculate this result the database system has to do a
      <emphasis>hidden</emphasis>
      access to the base tables SUPPLIER, SELLS and PART first. It
      does so by executing the query given in the view definition against
      those base tables. After that the additional qualifications
      (given in the
      query against the view) can be applied to obtain the resulting
      table.
     </para>
    </sect3>

    <sect3>
     <title>Drop Table, Drop Index, Drop View</title>

     <para>
      To destroy a table (including all tuples stored in that table) the
      DROP TABLE command is used:

      <programlisting>
DROP TABLE <replaceable class="parameter">table_name</replaceable>;
       </programlisting>
      </para>

     <para>
      To destroy the SUPPLIER table use the following statement:

      <programlisting>
DROP TABLE SUPPLIER;
      </programlisting>
     </para>

     <para>
      The DROP INDEX command is used to destroy an index:

      <programlisting>
DROP INDEX <replaceable class="parameter">index_name</replaceable>;
      </programlisting>
     </para>

     <para>
      Finally to destroy a given view use the command DROP VIEW:

      <programlisting>
DROP VIEW <replaceable class="parameter">view_name</replaceable>;
      </programlisting>
     </para>
    </sect3>
   </sect2>

   <sect2>
    <title>Data Manipulation</title>

    <sect3>
     <title>Insert Into</title>

     <para>
      Once a table is created (see
      <xref linkend="create-title" endterm="create-title">), it can be filled
      with tuples using the command <command>INSERT INTO</command>.
      The syntax is:

      <programlisting>
INSERT INTO <replaceable class="parameter">table_name</replaceable> (<replaceable class="parameter">name_of_attr_1</replaceable> 
    [, <replaceable class="parameter">name_of_attr_2</replaceable> [,...]])
    VALUES (<replaceable class="parameter">val_attr_1</replaceable> [, <replaceable class="parameter">val_attr_2</replaceable> [, ...]]);
      </programlisting>
     </para>

     <para>
      To insert the first tuple into the relation SUPPLIER (from
      <xref linkend="supplier-fig" endterm="supplier-fig">) we use the
      following statement:

      <programlisting>
INSERT INTO SUPPLIER (SNO, SNAME, CITY)
    VALUES (1, 'Smith', 'London');
      </programlisting>
     </para>

     <para>
      To insert the first tuple into the relation SELLS we use:

      <programlisting>
INSERT INTO SELLS (SNO, PNO)
    VALUES (1, 1);
      </programlisting>
     </para>
    </sect3>

    <sect3>
     <title>Update</title>

     <para>
      To change one or more attribute values of tuples in a relation the
      UPDATE command is used. The syntax is:

      <programlisting>
UPDATE <replaceable class="parameter">table_name</replaceable>
    SET <replaceable class="parameter">name_of_attr_1</replaceable> = <replaceable class="parameter">value_1</replaceable> 
        [, ... [, <replaceable class="parameter">name_of_attr_k</replaceable> = <replaceable class="parameter">value_k</replaceable>]]
    WHERE <replaceable class="parameter">condition</replaceable>;
      </programlisting>
     </para>

     <para>
      To change the value of attribute PRICE of the part 'Screw' in the
      relation PART we use:

      <programlisting>
UPDATE PART
    SET PRICE = 15
    WHERE PNAME = 'Screw';
      </programlisting>
     </para>

     <para>
      The new value of attribute PRICE of the tuple whose name is 'Screw' is
      now 15.
     </para>
    </sect3>

    <sect3>
     <title>Delete</title>

     <para>
      To delete a tuple from a particular table use the command DELETE
      FROM. The syntax is:

      <programlisting>
DELETE FROM <replaceable class="parameter">table_name</replaceable>
    WHERE <replaceable class="parameter">condition</replaceable>;
      </programlisting>
     </para>

     <para>
      To delete the supplier called 'Smith' of the table SUPPLIER the
      following statement is used:

      <programlisting>
DELETE FROM SUPPLIER
    WHERE SNAME = 'Smith';
      </programlisting>
     </para>
    </sect3>
   </sect2>

   <sect2 id="tutorial-catalogs">
    <title id="tutorial-catalogs-title">System Catalogs</title>

    <para>
     In every <acronym>SQL</acronym> database system
     <firstterm>system catalogs</firstterm> are used to keep
     track of which tables, views indexes etc. are defined in the
     database. These system catalogs can be queried as if they were normal
     relations. For example there is one catalog used for the definition of
     views. This catalog stores the query from the view definition. Whenever
     a query against a view is made, the system first gets the
     <firstterm>view definition query</firstterm> out of the catalog
     and materializes the view
     before proceeding with the user query (see
<!--
      section
      <xref linkend="view-impl" endterm="view-impl">.
    <citetitle>SIM98</citetitle>
-->
     <xref linkend="SIM98" endterm="SIM98">
     for a more detailed
     description). For more information about system catalogs refer to
     <xref linkend="DATE94" endterm="DATE94">.
    </para>
   </sect2>

   <sect2>
    <title>Embedded <acronym>SQL</acronym></title>

    <para>
     In this section we will sketch how <acronym>SQL</acronym> can be
     embedded into a host language (e.g. <literal>C</literal>).
     There are two main reasons why we want to use <acronym>SQL</acronym>
     from a host language:

     <itemizedlist>
      <listitem>
       <para>
	There are queries that cannot be formulated using pure <acronym>SQL</acronym>
	(i.e. recursive queries). To be able to perform such queries we need a
	host language with a greater expressive power than
	<acronym>SQL</acronym>.
       </para>
      </listitem>

      <listitem>
       <para>
	We simply want to access a database from some application that
	is written in the host language (e.g. a ticket reservation system
	with a graphical user interface is written in C and the information
	about which tickets are still left is stored in a database that can be
	accessed using embedded <acronym>SQL</acronym>).
       </para>
      </listitem>
     </itemizedlist>
    </para>

    <para>
     A program using embedded <acronym>SQL</acronym>
     in a host language consists of statements
     of the host language and of
     <firstterm>embedded <acronym>SQL</acronym></firstterm>
     (<acronym>ESQL</acronym>) statements. Every <acronym>ESQL</acronym>
     statement begins with the keywords <command>EXEC SQL</command>.
     The <acronym>ESQL</acronym> statements are
     transformed to statements of the host language
     by a <firstterm>precompiler</firstterm>
     (which usually inserts
     calls to library routines that perform the various <acronym>SQL</acronym>
     commands). 
    </para>

    <para>
     When we look at the examples throughout
     <xref linkend="select-title" endterm="select-title"> we
     realize that the result of the queries is very often a set of
     tuples. Most host languages are not designed to operate on sets so we
     need a mechanism to access every single tuple of the set of tuples
     returned by a SELECT statement. This mechanism can be provided by
     declaring a <firstterm>cursor</firstterm>.
     After that we can use the FETCH command to
     retrieve a tuple and set the cursor to the next tuple.
    </para>

    <para>
     For a detailed discussion on embedded <acronym>SQL</acronym>
     refer to
     <xref linkend="DATE97" endterm="DATE97">,
     <xref linkend="DATE94" endterm="DATE94">,
     or
     <xref linkend="ULL88" endterm="ULL88">.
    </para>
   </sect2>
  </sect1>
 </chapter>

<!-- Keep this comment at the end of the file
Local variables:
mode:sgml
sgml-omittag:nil
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:1
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:"./reference.ced"
sgml-exposed-tags:nil
sgml-local-catalogs:("/usr/lib/sgml/catalog")
sgml-local-ecat-files:nil
End:
-->
