<!-- doc/src/sgml/pgcrypto.sgml -->

<sect1 id="pgcrypto" xreflabel="pgcrypto">
 <title>pgcrypto</title>

 <indexterm zone="pgcrypto">
  <primary>pgcrypto</primary>
 </indexterm>

 <indexterm zone="pgcrypto">
  <primary>encryption</primary>
  <secondary>for specific columns</secondary>
 </indexterm>

 <para>
  The <filename>pgcrypto</> module provides cryptographic functions for
  <productname>PostgreSQL</>.
 </para>

 <sect2>
  <title>General Hashing Functions</title>

  <sect3>
   <title><function>digest()</function></title>

   <indexterm>
    <primary>digest</primary>
   </indexterm>

<synopsis>
digest(data text, type text) returns bytea
digest(data bytea, type text) returns bytea
</synopsis>

   <para>
    Computes a binary hash of the given <parameter>data</>.
    <parameter>type</> is the algorithm to use.
    Standard algorithms are <literal>md5</literal>, <literal>sha1</literal>,
    <literal>sha224</literal>, <literal>sha256</literal>,
    <literal>sha384</literal> and <literal>sha512</literal>.
    If <filename>pgcrypto</> was built with
    OpenSSL, more algorithms are available, as detailed in
    <xref linkend="pgcrypto-with-without-openssl">.
   </para>

   <para>
    If you want the digest as a hexadecimal string, use
    <function>encode()</> on the result.  For example:
<programlisting>
CREATE OR REPLACE FUNCTION sha1(bytea) returns text AS $$
    SELECT encode(digest($1, 'sha1'), 'hex')
$$ LANGUAGE SQL STRICT IMMUTABLE;
</programlisting>
   </para>
  </sect3>

  <sect3>
   <title><function>hmac()</function></title>

   <indexterm>
    <primary>hmac</primary>
   </indexterm>

<synopsis>
hmac(data text, key text, type text) returns bytea
hmac(data bytea, key text, type text) returns bytea
</synopsis>

   <para>
    Calculates hashed MAC for <parameter>data</> with key <parameter>key</>.
    <parameter>type</> is the same as in <function>digest()</>.
   </para>

   <para>
    This is similar to <function>digest()</> but the hash can only be
    recalculated knowing the key.  This prevents the scenario of someone
    altering data and also changing the hash to match.
   </para>

   <para>
    If the key is larger than the hash block size it will first be hashed and
    the result will be used as key.
   </para>
  </sect3>
 </sect2>

 <sect2>
  <title>Password Hashing Functions</title>

  <para>
   The functions <function>crypt()</> and <function>gen_salt()</>
   are specifically designed for hashing passwords.
   <function>crypt()</> does the hashing and <function>gen_salt()</>
   prepares algorithm parameters for it.
  </para>

  <para>
   The algorithms in <function>crypt()</> differ from the usual
   MD5 or SHA1 hashing algorithms in the following respects:
  </para>

  <orderedlist>
   <listitem>
    <para>
     They are slow.  As the amount of data is so small, this is the only
     way to make brute-forcing passwords hard.
    </para>
   </listitem>
   <listitem>
    <para>
     They use a random value, called the <firstterm>salt</>, so that users
     having the same password will have different encrypted passwords.
     This is also an additional defense against reversing the algorithm.
    </para>
   </listitem>
   <listitem>
    <para>
     They include the algorithm type in the result, so passwords hashed with
     different algorithms can co-exist.
    </para>
   </listitem>
   <listitem>
    <para>
     Some of them are adaptive &mdash; that means when computers get
     faster, you can tune the algorithm to be slower, without
     introducing incompatibility with existing passwords.
    </para>
   </listitem>
  </orderedlist>

  <para>
   <xref linkend="pgcrypto-crypt-algorithms"> lists the algorithms
   supported by the <function>crypt()</function> function.
  </para>

  <table id="pgcrypto-crypt-algorithms">
   <title>Supported Algorithms for <function>crypt()</></title>
   <tgroup cols="6">
    <thead>
     <row>
      <entry>Algorithm</entry>
      <entry>Max Password Length</entry>
      <entry>Adaptive?</entry>
      <entry>Salt Bits</entry>
      <entry>Output Length</entry>
      <entry>Description</entry>
     </row>
    </thead>
    <tbody>
     <row>
      <entry><literal>bf</></entry>
      <entry>72</entry>
      <entry>yes</entry>
      <entry>128</entry>
      <entry>60</entry>
      <entry>Blowfish-based, variant 2a</entry>
     </row>
     <row>
      <entry><literal>md5</></entry>
      <entry>unlimited</entry>
      <entry>no</entry>
      <entry>48</entry>
      <entry>34</entry>
      <entry>MD5-based crypt</entry>
     </row>
     <row>
      <entry><literal>xdes</></entry>
      <entry>8</entry>
      <entry>yes</entry>
      <entry>24</entry>
      <entry>20</entry>
      <entry>Extended DES</entry>
     </row>
     <row>
      <entry><literal>des</></entry>
      <entry>8</entry>
      <entry>no</entry>
      <entry>12</entry>
      <entry>13</entry>
      <entry>Original UNIX crypt</entry>
     </row>
    </tbody>
   </tgroup>
  </table>

  <sect3>
   <title><function>crypt()</></title>

   <indexterm>
    <primary>crypt</primary>
   </indexterm>

<synopsis>
crypt(password text, salt text) returns text
</synopsis>

   <para>
    Calculates a crypt(3)-style hash of <parameter>password</>.
    When storing a new password, you need to use
    <function>gen_salt()</> to generate a new <parameter>salt</> value.
    To check a password, pass the stored hash value as <parameter>salt</>,
    and test whether the result matches the stored value.
   </para>
   <para>
    Example of setting a new password:
<programlisting>
UPDATE ... SET pswhash = crypt('new password', gen_salt('md5'));
</programlisting>
   </para>
   <para>
    Example of authentication:
<programlisting>
SELECT (pswhash = crypt('entered password', pswhash)) AS pswmatch FROM ... ;
</programlisting>
    This returns <literal>true</> if the entered password is correct.
   </para>
  </sect3>

  <sect3>
   <title><function>gen_salt()</></title>

  <indexterm>
   <primary>gen_salt</primary>
  </indexterm>

<synopsis>
gen_salt(type text [, iter_count integer ]) returns text
</synopsis>

   <para>
    Generates a new random salt string for use in <function>crypt()</>.
    The salt string also tells <function>crypt()</> which algorithm to use.
   </para>

   <para>
    The <parameter>type</> parameter specifies the hashing algorithm.
    The accepted types are: <literal>des</literal>, <literal>xdes</literal>,
    <literal>md5</literal> and <literal>bf</literal>.
   </para>

   <para>
    The <parameter>iter_count</> parameter lets the user specify the iteration
    count, for algorithms that have one.
    The higher the count, the more time it takes to hash
    the password and therefore the more time to break it.  Although with
    too high a count the time to calculate a hash may be several years
    &mdash; which is somewhat impractical.  If the <parameter>iter_count</>
    parameter is omitted, the default iteration count is used.
    Allowed values for <parameter>iter_count</> depend on the algorithm and
    are shown in <xref linkend="pgcrypto-icfc-table">.
   </para>

   <table id="pgcrypto-icfc-table">
    <title>Iteration Counts for <function>crypt()</></title>
    <tgroup cols="4">
     <thead>
      <row>
       <entry>Algorithm</entry>
       <entry>Default</entry>
       <entry>Min</entry>
       <entry>Max</entry>
      </row>
     </thead>
     <tbody>
      <row>
       <entry><literal>xdes</></entry>
       <entry>725</entry>
       <entry>1</entry>
       <entry>16777215</entry>
      </row>
      <row>
       <entry><literal>bf</></entry>
       <entry>6</entry>
       <entry>4</entry>
       <entry>31</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    For <literal>xdes</literal> there is an additional limitation that the
    iteration count must be an odd number.
   </para>

   <para>
    To pick an appropriate iteration count, consider that
    the original DES crypt was designed to have the speed of 4 hashes per
    second on the hardware of that time.
    Slower than 4 hashes per second would probably dampen usability.
    Faster than 100 hashes per second is probably too fast.
   </para>

   <para>
    <xref linkend="pgcrypto-hash-speed-table"> gives an overview of the relative slowness
    of different hashing algorithms.
    The table shows how much time it would take to try all
    combinations of characters in an 8-character password, assuming
    that the password contains either only lower case letters, or
    upper- and lower-case letters and numbers.
    In the <literal>crypt-bf</literal> entries, the number after a slash is
    the <parameter>iter_count</parameter> parameter of
    <function>gen_salt</function>.
   </para>

   <table id="pgcrypto-hash-speed-table">
    <title>Hash Algorithm Speeds</title>
    <tgroup cols="5">
     <thead>
      <row>
       <entry>Algorithm</entry>
       <entry>Hashes/sec</entry>
       <entry>For <literal>[a-z]</></entry>
       <entry>For <literal>[A-Za-z0-9]</></entry>
       <entry>Duration relative to <literal>md5 hash</></entry>
      </row>
     </thead>
     <tbody>
      <row>
       <entry><literal>crypt-bf/8</></entry>
       <entry>1792</entry>
       <entry>4 years</entry>
       <entry>3927 years</entry>
       <entry>100k</entry>
      </row>
      <row>
       <entry><literal>crypt-bf/7</></entry>
       <entry>3648</entry>
       <entry>2 years</entry>
       <entry>1929 years</entry>
       <entry>50k</entry>
      </row>
      <row>
       <entry><literal>crypt-bf/6</></entry>
       <entry>7168</entry>
       <entry>1 year</entry>
       <entry>982 years</entry>
       <entry>25k</entry>
      </row>
      <row>
       <entry><literal>crypt-bf/5</></entry>
       <entry>13504</entry>
       <entry>188 days</entry>
       <entry>521 years</entry>
       <entry>12.5k</entry>
      </row>
      <row>
       <entry><literal>crypt-md5</></entry>
       <entry>171584</entry>
       <entry>15 days</entry>
       <entry>41 years</entry>
       <entry>1k</entry>
      </row>
      <row>
       <entry><literal>crypt-des</></entry>
       <entry>23221568</entry>
       <entry>157.5 minutes</entry>
       <entry>108 days</entry>
       <entry>7</entry>
      </row>
      <row>
       <entry><literal>sha1</></entry>
       <entry>37774272</entry>
       <entry>90 minutes</entry>
       <entry>68 days</entry>
       <entry>4</entry>
      </row>
      <row>
       <entry><literal>md5</> (hash)</entry>
       <entry>150085504</entry>
       <entry>22.5 minutes</entry>
       <entry>17 days</entry>
       <entry>1</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    Notes:
   </para>

   <itemizedlist>
    <listitem>
     <para>
     The machine used is an Intel Mobile Core i3.
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>crypt-des</> and <literal>crypt-md5</> algorithm numbers are
      taken from John the Ripper v1.6.38 <literal>-test</> output.
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>md5 hash</> numbers are from mdcrack 1.2.
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>sha1</> numbers are from lcrack-20031130-beta.
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>crypt-bf</literal> numbers are taken using a simple program that
      loops over 1000 8-character passwords.  That way I can show the speed
      with different numbers of iterations.  For reference: <literal>john
      -test</literal> shows 13506 loops/sec for <literal>crypt-bf/5</>.
      (The very small
      difference in results is in accordance with the fact that the
      <literal>crypt-bf</literal> implementation in <filename>pgcrypto</>
      is the same one used in John the Ripper.)
     </para>
    </listitem>
   </itemizedlist>

   <para>
    Note that <quote>try all combinations</quote> is not a realistic exercise.
    Usually password cracking is done with the help of dictionaries, which
    contain both regular words and various mutations of them.  So, even
    somewhat word-like passwords could be cracked much faster than the above
    numbers suggest, while a 6-character non-word-like password may escape
    cracking.  Or not.
   </para>
  </sect3>
 </sect2>

 <sect2>
  <title>PGP Encryption Functions</title>

  <para>
   The functions here implement the encryption part of the OpenPGP (RFC 4880)
   standard.  Supported are both symmetric-key and public-key encryption.
  </para>

  <para>
   An encrypted PGP message consists of 2 parts, or <firstterm>packets</>:
  </para>
  <itemizedlist>
   <listitem>
    <para>
     Packet containing a session key &mdash; either symmetric-key or public-key
     encrypted.
    </para>
   </listitem>
   <listitem>
    <para>
     Packet containing data encrypted with the session key.
    </para>
   </listitem>
  </itemizedlist>

  <para>
   When encrypting with a symmetric key (i.e., a password):
  </para>
  <orderedlist>
   <listitem>
    <para>
     The given password is hashed using a String2Key (S2K) algorithm.  This is
     rather similar to <function>crypt()</> algorithms &mdash; purposefully
     slow and with random salt &mdash; but it produces a full-length binary
     key.
    </para>
   </listitem>
   <listitem>
    <para>
     If a separate session key is requested, a new random key will be
     generated.  Otherwise the S2K key will be used directly as the session
     key.
    </para>
   </listitem>
   <listitem>
    <para>
     If the S2K key is to be used directly, then only S2K settings will be put
     into the session key packet.  Otherwise the session key will be encrypted
     with the S2K key and put into the session key packet.
    </para>
   </listitem>
  </orderedlist>

  <para>
   When encrypting with a public key:
  </para>
  <orderedlist>
   <listitem>
    <para>
     A new random session key is generated.
    </para>
   </listitem>
   <listitem>
    <para>
     It is encrypted using the public key and put into the session key packet.
    </para>
   </listitem>
  </orderedlist>

  <para>
   In either case the data to be encrypted is processed as follows:
  </para>
  <orderedlist>
   <listitem>
    <para>
     Optional data-manipulation: compression, conversion to UTF-8,
     and/or conversion of line-endings.
    </para>
   </listitem>
   <listitem>
    <para>
     The data is prefixed with a block of random bytes.  This is equivalent
     to using a random IV.
    </para>
   </listitem>
   <listitem>
    <para>
     An SHA1 hash of the random prefix and data is appended.
    </para>
   </listitem>
   <listitem>
    <para>
     All this is encrypted with the session key and placed in the data packet.
    </para>
   </listitem>
  </orderedlist>

  <sect3>
   <title><function>pgp_sym_encrypt()</function></title>

   <indexterm>
    <primary>pgp_sym_encrypt</primary>
   </indexterm>

   <indexterm>
    <primary>pgp_sym_encrypt_bytea</primary>
   </indexterm>

<synopsis>
pgp_sym_encrypt(data text, psw text [, options text ]) returns bytea
pgp_sym_encrypt_bytea(data bytea, psw text [, options text ]) returns bytea
</synopsis>
   <para>
    Encrypt <parameter>data</> with a symmetric PGP key <parameter>psw</>.
    The <parameter>options</> parameter can contain option settings,
    as described below.
   </para>
  </sect3>

  <sect3>
   <title><function>pgp_sym_decrypt()</function></title>

   <indexterm>
    <primary>pgp_sym_decrypt</primary>
   </indexterm>

   <indexterm>
    <primary>pgp_sym_decrypt_bytea</primary>
   </indexterm>

<synopsis>
pgp_sym_decrypt(msg bytea, psw text [, options text ]) returns text
pgp_sym_decrypt_bytea(msg bytea, psw text [, options text ]) returns bytea
</synopsis>
   <para>
    Decrypt a symmetric-key-encrypted PGP message.
   </para>
   <para>
    Decrypting <type>bytea</> data with <function>pgp_sym_decrypt</> is disallowed.
    This is to avoid outputting invalid character data.  Decrypting
    originally textual data with <function>pgp_sym_decrypt_bytea</> is fine.
   </para>
   <para>
    The <parameter>options</> parameter can contain option settings,
    as described below.
   </para>
  </sect3>

  <sect3>
   <title><function>pgp_pub_encrypt()</function></title>

   <indexterm>
    <primary>pgp_pub_encrypt</primary>
   </indexterm>

   <indexterm>
    <primary>pgp_pub_encrypt_bytea</primary>
   </indexterm>

<synopsis>
pgp_pub_encrypt(data text, key bytea [, options text ]) returns bytea
pgp_pub_encrypt_bytea(data bytea, key bytea [, options text ]) returns bytea
</synopsis>
   <para>
    Encrypt <parameter>data</> with a public PGP key <parameter>key</>.
    Giving this function a secret key will produce an error.
   </para>
   <para>
    The <parameter>options</> parameter can contain option settings,
    as described below.
   </para>
  </sect3>

  <sect3>
   <title><function>pgp_pub_decrypt()</function></title>

   <indexterm>
    <primary>pgp_pub_decrypt</primary>
   </indexterm>

   <indexterm>
    <primary>pgp_pub_decrypt_bytea</primary>
   </indexterm>

<synopsis>
pgp_pub_decrypt(msg bytea, key bytea [, psw text [, options text ]]) returns text
pgp_pub_decrypt_bytea(msg bytea, key bytea [, psw text [, options text ]]) returns bytea
</synopsis>
   <para>
    Decrypt a public-key-encrypted message.  <parameter>key</> must be the
    secret key corresponding to the public key that was used to encrypt.
    If the secret key is password-protected, you must give the password in
    <parameter>psw</>.  If there is no password, but you want to specify
    options, you need to give an empty password.
   </para>
   <para>
    Decrypting <type>bytea</> data with <function>pgp_pub_decrypt</> is disallowed.
    This is to avoid outputting invalid character data.  Decrypting
    originally textual data with <function>pgp_pub_decrypt_bytea</> is fine.
   </para>
   <para>
    The <parameter>options</> parameter can contain option settings,
    as described below.
   </para>
  </sect3>

  <sect3>
   <title><function>pgp_key_id()</function></title>

   <indexterm>
    <primary>pgp_key_id</primary>
   </indexterm>

<synopsis>
pgp_key_id(bytea) returns text
</synopsis>
   <para>
    <function>pgp_key_id</> extracts the key ID of a PGP public or secret key.
    Or it gives the key ID that was used for encrypting the data, if given
    an encrypted message.
   </para>
   <para>
    It can return 2 special key IDs:
   </para>
   <itemizedlist>
    <listitem>
     <para>
      <literal>SYMKEY</>
     </para>
     <para>
      The message is encrypted with a symmetric key.
     </para>
    </listitem>
    <listitem>
     <para>
      <literal>ANYKEY</>
     </para>
     <para>
      The message is public-key encrypted, but the key ID has been removed.
      That means you will need to try all your secret keys on it to see
      which one decrypts it.  <filename>pgcrypto</> itself does not produce
      such messages.
     </para>
    </listitem>
   </itemizedlist>
   <para>
    Note that different keys may have the same ID.   This is rare but a normal
    event. The client application should then try to decrypt with each one,
    to see which fits &mdash; like handling <literal>ANYKEY</>.
   </para>
  </sect3>

  <sect3>
   <title><function>armor()</function>, <function>dearmor()</function></title>

   <indexterm>
    <primary>armor</primary>
   </indexterm>

   <indexterm>
    <primary>dearmor</primary>
   </indexterm>

<synopsis>
armor(data bytea [ , keys text[], values text[] ]) returns text
dearmor(data text) returns bytea
</synopsis>
   <para>
    These functions wrap/unwrap binary data into PGP ASCII-armor format,
    which is basically Base64 with CRC and additional formatting.
   </para>

   <para>
    If the <parameter>keys</> and <parameter>values</> arrays are specified,
    an <firstterm>armor header</> is added to the armored format for each
    key/value pair. Both arrays must be single-dimensional, and they must
    be of the same length.  The keys and values cannot contain any non-ASCII
    characters.
   </para>
  </sect3>

  <sect3>
   <title><function>pgp_armor_headers</function></title>

   <indexterm>
    <primary>pgp_armor_headers</primary>
   </indexterm>

<synopsis>
pgp_armor_headers(data text, key out text, value out text) returns setof record
</synopsis>
   <para>
    <function>pgp_armor_headers()</> extracts the armor headers from
    <parameter>data</>.  The return value is a set of rows with two columns,
    key and value.  If the keys or values contain any non-ASCII characters,
    they are treated as UTF-8.
   </para>
  </sect3>

  <sect3>
   <title>Options for PGP Functions</title>

   <para>
    Options are named to be similar to GnuPG.  An option's value should be
    given after an equal sign; separate options from each other with commas.
    For example:
<programlisting>
pgp_sym_encrypt(data, psw, 'compress-algo=1, cipher-algo=aes256')
</programlisting>
   </para>

   <para>
    All of the options except <literal>convert-crlf</literal> apply only to
    encrypt functions.  Decrypt functions get the parameters from the PGP
    data.
   </para>

   <para>
    The most interesting options are probably
    <literal>compress-algo</literal> and <literal>unicode-mode</literal>.
    The rest should have reasonable defaults.
   </para>

  <sect4>
   <title>cipher-algo</title>

   <para>
    Which cipher algorithm to use.
   </para>
<literallayout>
Values: bf, aes128, aes192, aes256 (OpenSSL-only: <literal>3des</literal>, <literal>cast5</literal>)
Default: aes128
Applies to: pgp_sym_encrypt, pgp_pub_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>compress-algo</title>

   <para>
    Which compression algorithm to use.  Only available if
    <productname>PostgreSQL</productname> was built with zlib.
   </para>
<literallayout>
Values:
  0 - no compression
  1 - ZIP compression
  2 - ZLIB compression (= ZIP plus meta-data and block CRCs)
Default: 0
Applies to: pgp_sym_encrypt, pgp_pub_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>compress-level</title>

   <para>
    How much to compress.  Higher levels compress smaller but are slower.
    0 disables compression.
   </para>
<literallayout>
Values: 0, 1-9
Default: 6
Applies to: pgp_sym_encrypt, pgp_pub_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>convert-crlf</title>

   <para>
    Whether to convert <literal>\n</literal> into <literal>\r\n</literal> when
    encrypting and <literal>\r\n</literal> to <literal>\n</literal> when
    decrypting.  RFC 4880 specifies that text data should be stored using
    <literal>\r\n</literal> line-feeds.  Use this to get fully RFC-compliant
    behavior.
   </para>
<literallayout>
Values: 0, 1
Default: 0
Applies to: pgp_sym_encrypt, pgp_pub_encrypt, pgp_sym_decrypt, pgp_pub_decrypt
</literallayout>
  </sect4>

  <sect4>
   <title>disable-mdc</title>

   <para>
    Do not protect data with SHA-1.  The only good reason to use this
    option is to achieve compatibility with ancient PGP products, predating
    the addition of SHA-1 protected packets to RFC 4880.
    Recent gnupg.org and pgp.com software supports it fine.
   </para>
<literallayout>
Values: 0, 1
Default: 0
Applies to: pgp_sym_encrypt, pgp_pub_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>sess-key</title>

   <para>
    Use separate session key.  Public-key encryption always uses a separate
    session key; this option is for symmetric-key encryption, which by default
    uses the S2K key directly.
   </para>
<literallayout>
Values: 0, 1
Default: 0
Applies to: pgp_sym_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>s2k-mode</title>

   <para>
    Which S2K algorithm to use.
   </para>
<literallayout>
Values:
  0 - Without salt.  Dangerous!
  1 - With salt but with fixed iteration count.
  3 - Variable iteration count.
Default: 3
Applies to: pgp_sym_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>s2k-count</title>

   <para>
    The number of iterations of the S2K algorithm to use.  It must
    be a value between 1024 and 65011712, inclusive.
   </para>
<literallayout>
Default: A random value between 65536 and 253952
Applies to: pgp_sym_encrypt, only with s2k-mode=3
</literallayout>
  </sect4>

  <sect4>
   <title>s2k-digest-algo</title>

   <para>
    Which digest algorithm to use in S2K calculation.
   </para>
<literallayout>
Values: md5, sha1
Default: sha1
Applies to: pgp_sym_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>s2k-cipher-algo</title>

   <para>
    Which cipher to use for encrypting separate session key.
   </para>
<literallayout>
Values: bf, aes, aes128, aes192, aes256
Default: use cipher-algo
Applies to: pgp_sym_encrypt
</literallayout>
  </sect4>

  <sect4>
   <title>unicode-mode</title>

   <para>
    Whether to convert textual data from database internal encoding to
    UTF-8 and back.  If your database already is UTF-8, no conversion will
    be done, but the message will be tagged as UTF-8.  Without this option
    it will not be.
   </para>
<literallayout>
Values: 0, 1
Default: 0
Applies to: pgp_sym_encrypt, pgp_pub_encrypt
</literallayout>
  </sect4>
  </sect3>

 <sect3>
  <title>Generating PGP Keys with GnuPG</title>

  <para>
   To generate a new key:
<programlisting>
gpg --gen-key
</programlisting>
  </para>
  <para>
   The preferred key type is <quote>DSA and Elgamal</>.
  </para>
  <para>
   For RSA encryption you must create either DSA or RSA sign-only key
   as master and then add an RSA encryption subkey with
   <literal>gpg --edit-key</literal>.
  </para>
  <para>
   To list keys:
<programlisting>
gpg --list-secret-keys
</programlisting>
  </para>
  <para>
   To export a public key in ASCII-armor format:
<programlisting>
gpg -a --export KEYID > public.key
</programlisting>
  </para>
  <para>
   To export a secret key in ASCII-armor format:
<programlisting>
gpg -a --export-secret-keys KEYID > secret.key
</programlisting>
  </para>
  <para>
   You need to use <function>dearmor()</> on these keys before giving them to
   the PGP functions.  Or if you can handle binary data, you can drop
   <literal>-a</literal> from the command.
  </para>
  <para>
   For more details see <literal>man gpg</literal>,
   <ulink url="http://www.gnupg.org/gph/en/manual.html">The GNU
   Privacy Handbook</ulink> and other documentation on
   <ulink url="http://www.gnupg.org"></ulink>.
  </para>
 </sect3>

 <sect3>
  <title>Limitations of PGP Code</title>

  <itemizedlist>
   <listitem>
    <para>
    No support for signing.  That also means that it is not checked
    whether the encryption subkey belongs to the master key.
    </para>
   </listitem>
   <listitem>
    <para>
    No support for encryption key as master key.  As such practice
    is generally discouraged, this should not be a problem.
    </para>
   </listitem>
   <listitem>
    <para>
    No support for several subkeys.  This may seem like a problem, as this
    is common practice.  On the other hand, you should not use your regular
    GPG/PGP keys with <filename>pgcrypto</>, but create new ones,
    as the usage scenario is rather different.
    </para>
   </listitem>
  </itemizedlist>
  </sect3>
 </sect2>

 <sect2>
  <title>Raw Encryption Functions</title>

  <para>
   These functions only run a cipher over data; they don't have any advanced
   features of PGP encryption.  Therefore they have some major problems:
  </para>
  <orderedlist>
   <listitem>
    <para>
    They use user key directly as cipher key.
    </para>
   </listitem>
   <listitem>
    <para>
    They don't provide any integrity checking, to see
    if the encrypted data was modified.
    </para>
   </listitem>
   <listitem>
    <para>
    They expect that users manage all encryption parameters
    themselves, even IV.
    </para>
   </listitem>
   <listitem>
    <para>
    They don't handle text.
    </para>
   </listitem>
  </orderedlist>
  <para>
   So, with the introduction of PGP encryption, usage of raw
   encryption functions is discouraged.
  </para>

  <indexterm>
   <primary>encrypt</primary>
  </indexterm>

  <indexterm>
   <primary>decrypt</primary>
  </indexterm>

  <indexterm>
   <primary>encrypt_iv</primary>
  </indexterm>

  <indexterm>
   <primary>decrypt_iv</primary>
  </indexterm>

<synopsis>
encrypt(data bytea, key bytea, type text) returns bytea
decrypt(data bytea, key bytea, type text) returns bytea

encrypt_iv(data bytea, key bytea, iv bytea, type text) returns bytea
decrypt_iv(data bytea, key bytea, iv bytea, type text) returns bytea
</synopsis>

  <para>
   Encrypt/decrypt data using the cipher method specified by
   <parameter>type</parameter>.  The syntax of the
   <parameter>type</parameter> string is:

<synopsis>
<replaceable>algorithm</> <optional> <literal>-</> <replaceable>mode</> </optional> <optional> <literal>/pad:</> <replaceable>padding</> </optional>
</synopsis>
   where <replaceable>algorithm</> is one of:

  <itemizedlist>
   <listitem><para><literal>bf</literal> &mdash; Blowfish</para></listitem>
   <listitem><para><literal>aes</literal> &mdash; AES (Rijndael-128)</para></listitem>
  </itemizedlist>
   and <replaceable>mode</> is one of:
  <itemizedlist>
   <listitem>
    <para>
    <literal>cbc</literal> &mdash; next block depends on previous (default)
    </para>
   </listitem>
   <listitem>
    <para>
    <literal>ecb</literal> &mdash; each block is encrypted separately (for
    testing only)
    </para>
   </listitem>
  </itemizedlist>
   and <replaceable>padding</> is one of:
  <itemizedlist>
   <listitem>
    <para>
    <literal>pkcs</literal> &mdash; data may be any length (default)
    </para>
   </listitem>
   <listitem>
    <para>
    <literal>none</literal> &mdash; data must be multiple of cipher block size
    </para>
   </listitem>
  </itemizedlist>
  </para>
  <para>
   So, for example, these are equivalent:
<programlisting>
encrypt(data, 'fooz', 'bf')
encrypt(data, 'fooz', 'bf-cbc/pad:pkcs')
</programlisting>
  </para>
  <para>
   In <function>encrypt_iv</> and <function>decrypt_iv</>, the
   <parameter>iv</> parameter is the initial value for the CBC mode;
   it is ignored for ECB.
   It is clipped or padded with zeroes if not exactly block size.
   It defaults to all zeroes in the functions without this parameter.
  </para>
 </sect2>

 <sect2>
  <title>Random-Data Functions</title>

  <indexterm>
   <primary>gen_random_bytes</primary>
  </indexterm>

<synopsis>
gen_random_bytes(count integer) returns bytea
</synopsis>
  <para>
   Returns <parameter>count</> cryptographically strong random bytes.
   At most 1024 bytes can be extracted at a time.  This is to avoid
   draining the randomness generator pool.
  </para>

  <indexterm>
   <primary>gen_random_uuid</primary>
  </indexterm>

<synopsis>
gen_random_uuid() returns uuid
</synopsis>
  <para>
   Returns a version 4 (random) UUID.
  </para>
 </sect2>

 <sect2>
  <title>Notes</title>

  <sect3>
   <title>Configuration</title>

   <para>
    <filename>pgcrypto</> configures itself according to the findings of the
    main PostgreSQL <literal>configure</literal> script.  The options that
    affect it are <literal>--with-zlib</literal> and
    <literal>--with-openssl</literal>.
   </para>

   <para>
    When compiled with zlib, PGP encryption functions are able to
    compress data before encrypting.
   </para>

   <para>
    When compiled with OpenSSL, there will be more algorithms available.
    Also public-key encryption functions will be faster as OpenSSL
    has more optimized BIGNUM functions.
   </para>

   <table id="pgcrypto-with-without-openssl">
    <title>Summary of Functionality with and without OpenSSL</title>
    <tgroup cols="3">
     <thead>
      <row>
       <entry>Functionality</entry>
       <entry>Built-in</entry>
       <entry>With OpenSSL</entry>
      </row>
     </thead>
     <tbody>
      <row>
       <entry>MD5</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>SHA1</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>SHA224/256/384/512</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>Other digest algorithms</entry>
       <entry>no</entry>
       <entry>yes (Note 1)</entry>
      </row>
      <row>
       <entry>Blowfish</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>AES</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>DES/3DES/CAST5</entry>
       <entry>no</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>Raw encryption</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>PGP Symmetric encryption</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
      <row>
       <entry>PGP Public-Key encryption</entry>
       <entry>yes</entry>
       <entry>yes</entry>
      </row>
     </tbody>
    </tgroup>
   </table>

   <para>
    Notes:
   </para>

   <orderedlist>
    <listitem>
     <para>
      Any digest algorithm OpenSSL supports is automatically picked up.
      This is not possible with ciphers, which need to be supported
      explicitly.
     </para>
    </listitem>
   </orderedlist>
  </sect3>

  <sect3>
   <title>NULL Handling</title>

   <para>
    As is standard in SQL, all functions return NULL, if any of the arguments
    are NULL.  This may create security risks on careless usage.
   </para>
  </sect3>

  <sect3>
   <title>Security Limitations</title>

   <para>
    All <filename>pgcrypto</> functions run inside the database server.
    That means that all
    the data and passwords move between <filename>pgcrypto</> and client
    applications in clear text.  Thus you must:
   </para>

   <orderedlist>
    <listitem>
     <para>Connect locally or use SSL connections.</para>
    </listitem>
    <listitem>
     <para>Trust both system and database administrator.</para>
    </listitem>
   </orderedlist>

   <para>
    If you cannot, then better do crypto inside client application.
   </para>

   <para>
    The implementation does not resist
    <ulink url="http://en.wikipedia.org/wiki/Side-channel_attack">side-channel
    attacks</ulink>.  For example, the time required for
    a <filename>pgcrypto</> decryption function to complete varies among
    ciphertexts of a given size.
   </para>
  </sect3>

  <sect3>
   <title>Useful Reading</title>

   <itemizedlist>
    <listitem>
     <para><ulink url="http://www.gnupg.org/gph/en/manual.html"></ulink></para>
     <para>The GNU Privacy Handbook.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://www.openwall.com/crypt/"></ulink></para>
     <para>Describes the crypt-blowfish algorithm.</para>
    </listitem>
    <listitem>
     <para>
      <ulink url="http://www.stack.nl/~galactus/remailers/passphrase-faq.html"></ulink>
     </para>
     <para>How to choose a good password.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://world.std.com/~reinhold/diceware.html"></ulink></para>
     <para>Interesting idea for picking passwords.</para>
    </listitem>
    <listitem>
     <para>
      <ulink url="http://www.interhack.net/people/cmcurtin/snake-oil-faq.html"></ulink>
     </para>
     <para>Describes good and bad cryptography.</para>
    </listitem>
   </itemizedlist>
  </sect3>

  <sect3>
   <title>Technical References</title>

   <itemizedlist>
    <listitem>
     <para><ulink url="http://www.ietf.org/rfc/rfc4880.txt"></ulink></para>
     <para>OpenPGP message format.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://www.ietf.org/rfc/rfc1321.txt"></ulink></para>
     <para>The MD5 Message-Digest Algorithm.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://www.ietf.org/rfc/rfc2104.txt"></ulink></para>
     <para>HMAC: Keyed-Hashing for Message Authentication.</para>
    </listitem>
    <listitem>
     <para>
      <ulink url="http://www.usenix.org/events/usenix99/provos.html"></ulink>
     </para>
     <para>Comparison of crypt-des, crypt-md5 and bcrypt algorithms.</para>
    </listitem>
    <listitem>
     <para>
      <ulink url="http://en.wikipedia.org/wiki/Fortuna_(PRNG)"></ulink>
     </para>
     <para>Description of Fortuna CSPRNG.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://jlcooke.ca/random/"></ulink></para>
     <para>Jean-Luc Cooke Fortuna-based <filename>/dev/random</> driver for Linux.</para>
    </listitem>
    <listitem>
     <para><ulink url="http://kodu.ut.ee/~lipmaa/crypto/"></ulink></para>
     <para>Collection of cryptology pointers.</para>
    </listitem>
   </itemizedlist>
  </sect3>
 </sect2>

 <sect2>
  <title>Author</title>

  <para>
   Marko Kreen <email>markokr@gmail.com</email>
  </para>

  <para>
   <filename>pgcrypto</filename> uses code from the following sources:
  </para>

  <informaltable>
   <tgroup cols="3">
    <thead>
     <row>
      <entry>Algorithm</entry>
      <entry>Author</entry>
      <entry>Source origin</entry>
     </row>
    </thead>
    <tbody>
     <row>
      <entry>DES crypt</entry>
      <entry>David Burren and others</entry>
      <entry>FreeBSD libcrypt</entry>
     </row>
     <row>
      <entry>MD5 crypt</entry>
      <entry>Poul-Henning Kamp</entry>
      <entry>FreeBSD libcrypt</entry>
     </row>
     <row>
      <entry>Blowfish crypt</entry>
      <entry>Solar Designer</entry>
      <entry>www.openwall.com</entry>
     </row>
     <row>
      <entry>Blowfish cipher</entry>
      <entry>Simon Tatham</entry>
      <entry>PuTTY</entry>
     </row>
     <row>
      <entry>Rijndael cipher</entry>
      <entry>Brian Gladman</entry>
      <entry>OpenBSD sys/crypto</entry>
     </row>
     <row>
      <entry>MD5 hash and SHA1</entry>
      <entry>WIDE Project</entry>
      <entry>KAME kame/sys/crypto</entry>
     </row>
     <row>
      <entry>SHA256/384/512 </entry>
      <entry>Aaron D. Gifford</entry>
      <entry>OpenBSD sys/crypto</entry>
     </row>
     <row>
      <entry>BIGNUM math</entry>
      <entry>Michael J. Fromberger</entry>
      <entry>dartmouth.edu/~sting/sw/imath</entry>
     </row>
    </tbody>
   </tgroup>
  </informaltable>
 </sect2>

</sect1>
