<!-- $PostgreSQL: pgsql/doc/src/sgml/high-availability.sgml,v 1.46 2010/02/18 04:14:38 momjian Exp $ -->

<chapter id="high-availability">
 <title>High Availability, Load Balancing, and Replication</title>

 <indexterm><primary>high availability</></>
 <indexterm><primary>failover</></>
 <indexterm><primary>replication</></>
 <indexterm><primary>load balancing</></>
 <indexterm><primary>clustering</></>
 <indexterm><primary>data partitioning</></>

 <para>
  Database servers can work together to allow a second server to
  take over quickly if the primary server fails (high
  availability), or to allow several computers to serve the same
  data (load balancing).  Ideally, database servers could work
  together seamlessly.  Web servers serving static web pages can
  be combined quite easily by merely load-balancing web requests
  to multiple machines.  In fact, read-only database servers can
  be combined relatively easily too.  Unfortunately, most database
  servers have a read/write mix of requests, and read/write servers
  are much harder to combine.  This is because though read-only
  data needs to be placed on each server only once, a write to any
  server has to be propagated to all servers so that future read
  requests to those servers return consistent results.
 </para>

 <para>
  This synchronization problem is the fundamental difficulty for
  servers working together.  Because there is no single solution
  that eliminates the impact of the sync problem for all use cases,
  there are multiple solutions.  Each solution addresses this
  problem in a different way, and minimizes its impact for a specific
  workload.
 </para>

 <para>
  Some solutions deal with synchronization by allowing only one
  server to modify the data.  Servers that can modify data are
  called read/write or "master" servers.  Servers that can reply
  to read-only queries are called "slave" servers.  Servers that
  cannot be accessed until they are changed to master servers are
  called "standby" servers.
 </para>

 <para>
  Some solutions are synchronous,
  meaning that a data-modifying transaction is not considered
  committed until all servers have committed the transaction.  This
  guarantees that a failover will not lose any data and that all
  load-balanced servers will return consistent results no matter
  which server is queried. In contrast, asynchronous solutions allow some
  delay between the time of a commit and its propagation to the other servers,
  opening the possibility that some transactions might be lost in
  the switch to a backup server, and that load balanced servers
  might return slightly stale results.  Asynchronous communication
  is used when synchronous would be too slow.
 </para>

 <para>
  Solutions can also be categorized by their granularity.  Some solutions
  can deal only with an entire database server, while others allow control
  at the per-table or per-database level.
 </para>

 <para>
  Performance must be considered in any choice.  There is usually a
  trade-off between functionality and
  performance.  For example, a fully synchronous solution over a slow
  network might cut performance by more than half, while an asynchronous
  one might have a minimal performance impact.
 </para>

 <para>
  The remainder of this section outlines various failover, replication,
  and load balancing solutions.  A <ulink
  url="http://www.postgres-r.org/documentation/terms">glossary</ulink> is
  also available.
 </para>

 <sect1 id="different-replication-solutions">
 <title>Comparison of different solutions</title>

 <variablelist>

  <varlistentry>
   <term>Shared Disk Failover</term>
   <listitem>

    <para>
     Shared disk failover avoids synchronization overhead by having only one
     copy of the database.  It uses a single disk array that is shared by
     multiple servers.  If the main database server fails, the standby server
     is able to mount and start the database as though it were recovering from
     a database crash.  This allows rapid failover with no data loss.
    </para>

    <para>
     Shared hardware functionality is common in network storage devices.
     Using a network file system is also possible, though care must be
     taken that the file system has full <acronym>POSIX</> behavior (see <xref
     linkend="creating-cluster-nfs">).  One significant limitation of this
     method is that if the shared disk array fails or becomes corrupt, the
     primary and standby servers are both nonfunctional.  Another issue is
     that the standby server should never access the shared storage while
     the primary server is running.
    </para>

   </listitem>
  </varlistentry>

  <varlistentry>
   <term>File System (Block-Device) Replication</term>
   <listitem>

    <para>
     A modified version of shared hardware functionality is file system
     replication, where all changes to a file system are mirrored to a file
     system residing on another computer.  The only restriction is that
     the mirroring must be done in a way that ensures the standby server
     has a consistent copy of the file system &mdash; specifically, writes
     to the standby must be done in the same order as those on the master.
     <productname>DRBD</> is a popular file system replication solution
     for Linux.
    </para>

<!--
https://forge.continuent.org/pipermail/sequoia/2006-November/004070.html

Oracle RAC is a shared disk approach and just send cache invalidations
to other nodes but not actual data. As the disk is shared, data is
only committed once to disk and there is a distributed locking
protocol to make nodes agree on a serializable transactional order.
-->

   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Warm and Hot Standby Using Point-In-Time Recovery (<acronym>PITR</>)</term>
   <listitem>

    <para>
     Warm and hot standby servers can be kept current by reading a
     stream of write-ahead log (<acronym>WAL</>)
     records.  If the main server fails, the warm standby contains
     almost all of the data of the main server, and can be quickly
     made the new master database server.  This is asynchronous and
     can only be done for the entire database server.
    </para>
    <para>
     A PITR standby server can be kept more up-to-date using streaming
     replication.;  see <xref linkend="streaming-replication">.  For
     warm standby information, see <xref linkend="warm-standby">, and
     for hot standby, see <xref linkend="hot-standby">.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Trigger-Based Master-Slave Replication</term>
   <listitem>

    <para>
     A master-slave replication setup sends all data modification
     queries to the master server.  The master server asynchronously
     sends data changes to the slave server.  The slave can answer
     read-only queries while the master server is running.  The
     slave server is ideal for data warehouse queries.
    </para>

    <para>
     <productname>Slony-I</> is an example of this type of replication, with per-table
     granularity, and support for multiple slaves.  Because it
     updates the slave server asynchronously (in batches), there is
     possible data loss during fail over.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Statement-Based Replication Middleware</term>
   <listitem>

    <para>
     With statement-based replication middleware, a program intercepts
     every SQL query and sends it to one or all servers.  Each server
     operates independently.  Read-write queries are sent to all servers,
     while read-only queries can be sent to just one server, allowing
     the read workload to be distributed.
    </para>

    <para>
     If queries are simply broadcast unmodified, functions like
     <function>random()</>, <function>CURRENT_TIMESTAMP</>, and
     sequences can have different values on different servers.
     This is because each server operates independently, and because
     SQL queries are broadcast (and not actual modified rows).  If
     this is unacceptable, either the middleware or the application
     must query such values from a single server and then use those
     values in write queries.  Also, care must be taken that all
     transactions either commit or abort on all servers, perhaps
     using two-phase commit (<xref linkend="sql-prepare-transaction"
     endterm="sql-prepare-transaction-title"> and <xref
     linkend="sql-commit-prepared" endterm="sql-commit-prepared-title">.
     <productname>Pgpool-II</> and <productname>Sequoia</> are examples of
     this type of replication.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Asynchronous Multimaster Replication</term>
   <listitem>

    <para>
     For servers that are not regularly connected, like laptops or
     remote servers, keeping data consistent among servers is a
     challenge.  Using asynchronous multimaster replication, each
     server works independently, and periodically communicates with
     the other servers to identify conflicting transactions.  The
     conflicts can be resolved by users or conflict resolution rules.
     Bucardo is an example of this type of replication.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Synchronous Multimaster Replication</term>
   <listitem>

    <para>
     In synchronous multimaster replication, each server can accept
     write requests, and modified data is transmitted from the
     original server to every other server before each transaction
     commits.  Heavy write activity can cause excessive locking,
     leading to poor performance.  In fact, write performance is
     often worse than that of a single server.  Read requests can
     be sent to any server.  Some implementations use shared disk
     to reduce the communication overhead.  Synchronous multimaster
     replication is best for mostly read workloads, though its big
     advantage is that any server can accept write requests &mdash;
     there is no need to partition workloads between master and
     slave servers, and because the data changes are sent from one
     server to another, there is no problem with non-deterministic
     functions like <function>random()</>.
    </para>

    <para>
     <productname>PostgreSQL</> does not offer this type of replication,
     though <productname>PostgreSQL</> two-phase commit (<xref
     linkend="sql-prepare-transaction"
     endterm="sql-prepare-transaction-title"> and <xref
     linkend="sql-commit-prepared" endterm="sql-commit-prepared-title">)
     can be used to implement this in application code or middleware.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Commercial Solutions</term>
   <listitem>

    <para>
     Because <productname>PostgreSQL</> is open source and easily
     extended, a number of companies have taken <productname>PostgreSQL</>
     and created commercial closed-source solutions with unique
     failover, replication, and load balancing capabilities.
    </para>
   </listitem>
  </varlistentry>

 </variablelist>

 <para>
  <xref linkend="high-availability-matrix"> summarizes
  the capabilities of the various solutions listed above.
 </para>

 <table id="high-availability-matrix">
  <title>High Availability, Load Balancing, and Replication Feature Matrix</title>
  <tgroup cols="8">
   <thead>
    <row>
     <entry>Feature</entry>
     <entry>Shared Disk Failover</entry>
     <entry>File System Replication</entry>
     <entry>Hot/Warm Standby Using PITR</entry>
     <entry>Trigger-Based Master-Slave Replication</entry>
     <entry>Statement-Based Replication Middleware</entry>
     <entry>Asynchronous Multimaster Replication</entry>
     <entry>Synchronous Multimaster Replication</entry>
    </row>
   </thead>

   <tbody>

    <row>
     <entry>Most Common Implementation</entry>
     <entry align="center">NAS</entry>
     <entry align="center">DRBD</entry>
     <entry align="center">PITR</entry>
     <entry align="center">Slony</entry>
     <entry align="center">pgpool-II</entry>
     <entry align="center">Bucardo</entry>
     <entry align="center"></entry>
    </row>

    <row>
     <entry>Communication Method</entry>
     <entry align="center">shared disk</entry>
     <entry align="center">disk blocks</entry>
     <entry align="center">WAL</entry>
     <entry align="center">table rows</entry>
     <entry align="center">SQL</entry>
     <entry align="center">table rows</entry>
     <entry align="center">table rows and row locks</entry>
    </row>

    <row>
     <entry>No special hardware required</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
    </row>

    <row>
     <entry>Allows multiple master servers</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
    </row>

    <row>
     <entry>No master server overhead</entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
    </row>

    <row>
     <entry>No waiting for multiple servers</entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
    </row>

    <row>
     <entry>Master failure will never lose data</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
    </row>

    <row>
     <entry>Slaves accept read-only queries</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center">Hot only</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
    </row>

    <row>
     <entry>Per-table granularity</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
    </row>

    <row>
     <entry>No conflict resolution necessary</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center">&bull;</entry>
     <entry align="center"></entry>
     <entry align="center"></entry>
     <entry align="center">&bull;</entry>
    </row>

   </tbody>
  </tgroup>
 </table>

 <para>
  There are a few solutions that do not fit into the above categories:
 </para>

 <variablelist>

  <varlistentry>
   <term>Data Partitioning</term>
   <listitem>

    <para>
     Data partitioning splits tables into data sets.  Each set can
     be modified by only one server.  For example, data can be
     partitioned by offices, e.g., London and Paris, with a server
     in each office.  If queries combining London and Paris data
     are necessary, an application can query both servers, or
     master/slave replication can be used to keep a read-only copy
     of the other office's data on each server.
    </para>
   </listitem>
  </varlistentry>

  <varlistentry>
   <term>Multiple-Server Parallel Query Execution</term>
   <listitem>

    <para>
     Many of the above solutions allow multiple servers to handle multiple
     queries, but none allow a single query to use multiple servers to
     complete faster.  This solution allows multiple servers to work
     concurrently on a single query.  It is usually accomplished by
     splitting the data among servers and having each server execute its
     part of the query and return results to a central server where they
     are combined and returned to the user.  <productname>Pgpool-II</>
     has this capability.  Also, this can be implemented using the
     <productname>PL/Proxy</> toolset.
    </para>

   </listitem>
  </varlistentry>

 </variablelist>

 </sect1>

 <sect1 id="warm-standby">
  <title>File-based Log Shipping</title>

  <indexterm zone="high-availability">
   <primary>warm standby</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>PITR standby</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>standby server</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>log shipping</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>witness server</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>STONITH</primary>
  </indexterm>

  <para>
   Continuous archiving can be used to create a <firstterm>high
   availability</> (HA) cluster configuration with one or more
   <firstterm>standby servers</> ready to take over operations if the
   primary server fails. This capability is widely referred to as
   <firstterm>warm standby</> or <firstterm>log shipping</>.
  </para>

  <para>
   The primary and standby server work together to provide this capability,
   though the servers are only loosely coupled. The primary server operates
   in continuous archiving mode, while each standby server operates in
   continuous recovery mode, reading the WAL files from the primary. No
   changes to the database tables are required to enable this capability,
   so it offers low administration overhead compared to some other
   replication solutions. This configuration also has relatively low
   performance impact on the primary server.
  </para>

  <para>
   Directly moving WAL records from one database server to another
   is typically described as log shipping. <productname>PostgreSQL</>
   implements file-based log shipping, which means that WAL records are
   transferred one file (WAL segment) at a time. WAL files (16MB) can be
   shipped easily and cheaply over any distance, whether it be to an
   adjacent system, another system at the same site, or another system on
   the far side of the globe. The bandwidth required for this technique
   varies according to the transaction rate of the primary server.
   Record-based log shipping is also possible with custom-developed
   procedures, as discussed in <xref linkend="warm-standby-record">.
  </para>

  <para>
   It should be noted that the log shipping is asynchronous, i.e., the WAL
   records are shipped after transaction commit. As a result, there is a
   window for data loss should the primary server suffer a catastrophic
   failure; transactions not yet shipped will be lost.  The size of the
   data loss window can be limited by use of the
   <varname>archive_timeout</varname> parameter, which can be set as low
   as a few seconds.  However such a low setting will
   substantially increase the bandwidth required for file shipping.
   If you need a window of less than a minute or so, it is probably better
   to consider record-based log shipping.
  </para>

  <para>
   The standby server is not available for access, since it is continually
   performing recovery processing. Recovery performance is sufficiently
   good that the standby will typically be only moments away from full
   availability once it has been activated. As a result, this is called
   a warm standby configuration which offers high
   availability. Restoring a server from an archived base backup and
   rollforward will take considerably longer, so that technique only
   offers a solution for disaster recovery, not high availability.
  </para>

  <sect2 id="warm-standby-planning">
   <title>Planning</title>

   <para>
    It is usually wise to create the primary and standby servers
    so that they are as similar as possible, at least from the
    perspective of the database server.  In particular, the path names
    associated with tablespaces will be passed across unmodified, so both
    primary and standby servers must have the same mount paths for
    tablespaces if that feature is used.  Keep in mind that if
    <xref linkend="sql-createtablespace" endterm="sql-createtablespace-title">
    is executed on the primary, any new mount point needed for it must
    be created on the primary and all standby servers before the command
    is executed. Hardware need not be exactly the same, but experience shows
    that maintaining two identical systems is easier than maintaining two
    dissimilar ones over the lifetime of the application and system.
    In any case the hardware architecture must be the same &mdash; shipping
    from, say, a 32-bit to a 64-bit system will not work.
   </para>

   <para>
    In general, log shipping between servers running different major
    <productname>PostgreSQL</> release
    levels is not possible. It is the policy of the PostgreSQL Global
    Development Group not to make changes to disk formats during minor release
    upgrades, so it is likely that running different minor release levels
    on primary and standby servers will work successfully. However, no
    formal support for that is offered and you are advised to keep primary
    and standby servers at the same release level as much as possible.
    When updating to a new minor release, the safest policy is to update
    the standby servers first &mdash; a new minor release is more likely
    to be able to read WAL files from a previous minor release than vice
    versa.
   </para>

   <para>
    There is no special mode required to enable a standby server. The
    operations that occur on both primary and standby servers are
    normal continuous archiving and recovery tasks. The only point of
    contact between the two database servers is the archive of WAL files
    that both share: primary writing to the archive, standby reading from
    the archive. Care must be taken to ensure that WAL archives from separate
    primary servers do not become mixed together or confused. The archive
    need not be large if it is only required for standby operation.
   </para>

   <para>
    The magic that makes the two loosely coupled servers work together is
    simply a <varname>restore_command</> used on the standby that,
    when asked for the next WAL file, waits for it to become available from
    the primary. The <varname>restore_command</> is specified in the
    <filename>recovery.conf</> file on the standby server. Normal recovery
    processing would request a file from the WAL archive, reporting failure
    if the file was unavailable.  For standby processing it is normal for
    the next WAL file to be unavailable, so the standby must wait for
    it to appear. For files ending in <literal>.backup</> or
    <literal>.history</> there is no need to wait, and a non-zero return
    code must be returned. A waiting <varname>restore_command</> can be
    written as a custom script that loops after polling for the existence of
    the next WAL file. There must also be some way to trigger failover, which
    should interrupt the <varname>restore_command</>, break the loop and
    return a file-not-found error to the standby server. This ends recovery
    and the standby will then come up as a normal server.
   </para>

   <para>
    Pseudocode for a suitable <varname>restore_command</> is:
<programlisting>
triggered = false;
while (!NextWALFileReady() &amp;&amp; !triggered)
{
    sleep(100000L);         /* wait for ~0.1 sec */
    if (CheckForExternalTrigger())
        triggered = true;
}
if (!triggered)
        CopyWALFileForRecovery();
</programlisting>
   </para>

   <para>
    A working example of a waiting <varname>restore_command</> is provided
    as a <filename>contrib</> module named <application>pg_standby</>. It
    should be used as a reference on how to correctly implement the logic
    described above. It can also be extended as needed to support specific
    configurations and environments.
   </para>

   <para>
    <productname>PostgreSQL</productname> does not provide the system
    software required to identify a failure on the primary and notify
    the standby database server.  Many such tools exist and are well
    integrated with the operating system facilities required for
    successful failover, such as IP address migration.
   </para>

   <para>
    The method for triggering failover is an important part of planning
    and design. One potential option is the <varname>restore_command</>
    command.  It is executed once for each WAL file, but the process
    running the <varname>restore_command</> is created and dies for
    each file, so there is no daemon or server process, and 
    signals or a signal handler cannot be used. Therefore, the
    <varname>restore_command</> is not suitable to trigger failover.
    It is possible to use a simple timeout facility, especially if
    used in conjunction with a known <varname>archive_timeout</>
    setting on the primary. However, this is somewhat error prone
    since a network problem or busy primary server might be sufficient
    to initiate failover. A notification mechanism such as the explicit
    creation of a trigger file is ideal, if this can be arranged.
   </para>

   <para>
    The size of the WAL archive can be minimized by using the <literal>%r</>
    option of the <varname>restore_command</>. This option specifies the
    last archive file name that needs to be kept to allow the recovery to
    restart correctly. This can be used to truncate the archive once
    files are no longer required, assuming the archive is writable from the
    standby server.
   </para>
  </sect2>

  <sect2 id="warm-standby-config">
   <title>Implementation</title>

   <para>
    The short procedure for configuring a standby server is as follows. For
    full details of each step, refer to previous sections as noted.
    <orderedlist>
     <listitem>
      <para>
       Set up primary and standby systems as nearly identical as
       possible, including two identical copies of
       <productname>PostgreSQL</> at the same release level.
      </para>
     </listitem>
     <listitem>
      <para>
       Set up continuous archiving from the primary to a WAL archive
       directory on the standby server. Ensure that
       <xref linkend="guc-archive-mode">,
       <xref linkend="guc-archive-command"> and
       <xref linkend="guc-archive-timeout">
       are set appropriately on the primary
       (see <xref linkend="backup-archiving-wal">).
      </para>
     </listitem>
     <listitem>
      <para>
       Make a base backup of the primary server (see <xref
       linkend="backup-base-backup">), and load this data onto the standby.
      </para>
     </listitem>
     <listitem>
      <para>
       Begin recovery on the standby server from the local WAL
       archive, using a <filename>recovery.conf</> that specifies a
       <varname>restore_command</> that waits as described
       previously (see <xref linkend="backup-pitr-recovery">).
      </para>
     </listitem>
    </orderedlist>
   </para>

   <para>
    Recovery treats the WAL archive as read-only, so once a WAL file has
    been copied to the standby system it can be copied to tape at the same
    time as it is being read by the standby database server.
    Thus, running a standby server for high availability can be performed at
    the same time as files are stored for longer term disaster recovery
    purposes.
   </para>

   <para>
    For testing purposes, it is possible to run both primary and standby
    servers on the same system. This does not provide any worthwhile
    improvement in server robustness, nor would it be described as HA.
   </para>
  </sect2>

  <sect2 id="warm-standby-record">
   <title>Record-based Log Shipping</title>

   <para>
    <productname>PostgreSQL</productname> directly supports file-based
    log shipping as described above. It is also possible to implement
    record-based log shipping, though this requires custom development.
   </para>

   <para>
    An external program can call the <function>pg_xlogfile_name_offset()</>
    function (see <xref linkend="functions-admin">)
    to find out the file name and the exact byte offset within it of
    the current end of WAL.  It can then access the WAL file directly
    and copy the data from the last known end of WAL through the current end
    over to the standby servers.  With this approach, the window for data
    loss is the polling cycle time of the copying program, which can be very
    small, and there is no wasted bandwidth from forcing partially-used
    segment files to be archived.  Note that the standby servers'
    <varname>restore_command</> scripts can only deal with whole WAL files,
    so the incrementally copied data is not ordinarily made available to
    the standby servers.  It is of use only when the primary dies &mdash;
    then the last partial WAL file is fed to the standby before allowing
    it to come up.  The correct implementation of this process requires
    cooperation of the <varname>restore_command</> script with the data
    copying program.
   </para>

   <para>
    Starting with <productname>PostgreSQL</> version 9.0, you can use
    streaming replication (see <xref linkend="streaming-replication">) to
    achieve the same benefits with less effort.
   </para>
  </sect2>
 </sect1>

  <sect1 id="streaming-replication">
   <title>Streaming Replication</title>

   <indexterm zone="high-availability">
    <primary>Streaming Replication</primary>
   </indexterm>

   <para>
    <productname>PostgreSQL</> includes a simple streaming replication
    mechanism, which allows the standby server to stay more up-to-date than
    file-based log shipping. The standby connects to the primary
    and the primary starts streaming WAL records from where the standby
    left off, and continues streaming them as they are generated, without
    waiting for the WAL file to be filled. So with streaming replication,
    <varname>archive_timeout</> does not need to be changed to reduce
    possible data loss.
   </para>

   <para>
    Streaming replication relies on file-based continuous archiving for
    making the base backup and for allowing a standby to catch up if it is
    disconnected from the primary for long enough for the primary to
    delete old WAL files still required by the standby.
   </para>

   <sect2 id="streaming-replication-setup">
    <title>Setup</title>
    <para>
     The short procedure for configuring streaming replication is as follows.
     For full details of each step, refer to other sections as noted.

     <orderedlist>
      <listitem>
       <para>
        Set up primary and standby systems as near identically as possible,
        including two identical copies of <productname>PostgreSQL</> at the
        same release level.
       </para>
      </listitem>
     <listitem>
      <para>
       Set up continuous archiving from the primary to a WAL archive located
       in a directory on the standby server. Ensure that
       <xref linkend="guc-archive-mode">,
       <xref linkend="guc-archive-command"> and
       <xref linkend="guc-archive-timeout">
       are set appropriately on the primary
       (see <xref linkend="backup-archiving-wal">).
      </para>
     </listitem>

     <listitem>
      <para>
       Set <xref linkend="guc-listen-addresses"> and authentication options
       (see <filename>pg_hba.conf</>) so the standby server can connect to
       the <literal>replication</> pseudo-database on the primary server (see
       <xref linkend="streaming-replication-authentication">).
      </para>
      <para>
       On systems that support the keepalive socket option, setting
       <xref linkend="guc-tcp-keepalives-idle">,
       <xref linkend="guc-tcp-keepalives-interval"> and
       <xref linkend="guc-tcp-keepalives-count"> helps the master promptly
       notice a broken connection.
      </para>
     </listitem>
     <listitem>
      <para>
       Set the maximum number of concurrent connections from the standby servers
       (see <xref linkend="guc-max-wal-senders"> for details).
      </para>
     </listitem>
     <listitem>
      <para>
       Start the <productname>PostgreSQL</> server on the primary.
      </para>
     </listitem>
     <listitem>
      <para>
       Make a base backup of the primary server (see
       <xref linkend="backup-base-backup">), and load this data onto the
       standby. Note that all files present in <filename>pg_xlog</>
       and <filename>pg_xlog/archive_status</> on the <emphasis>standby</>
       server should be removed because they might be obsolete.
      </para>
     </listitem>
     <listitem>
      <para>
       If you're setting up the standby server for high availability purposes,
       set up WAL archiving, connections and authentication like the primary
       server, because the standby server will work as a primary server after
       failover. If you're setting up the standby server for reporting
       purposes, with no plans to fail over to it, configure the standby
       accordingly.
      </para>
     </listitem>
     <listitem>
      <para>
       Create a recovery command file <filename>recovery.conf</> in the data
       directory on the standby server.
      </para>

      <variablelist id="replication-config-settings" xreflabel="Replication Settings">
       <varlistentry id="standby-mode" xreflabel="standby_mode">
        <term><varname>standby_mode</varname> (<type>boolean</type>)</term>
        <listitem>
         <para>
          Specifies whether to start the <productname>PostgreSQL</> server as
          a standby. If this parameter is <literal>on</>, the server will
          not end recovery when the end of archived WAL is reached, but
          will keep trying to continue recovery using <varname>restore_command</>
          and by connecting to the primary server as specified by the
          <varname>primary_conninfo</> setting.
         </para>
        </listitem>
       </varlistentry>
       <varlistentry>
        <term><varname>restore_command</varname> (<type>string</type>)</term>
        <term><varname>restore_end_command</varname> (<type>string</type>)</term>
        <listitem>
         <para>
          With <varname>standby_mode</> enabled, <varname>restore_command</>
          (and <varname>restore_end_command</>) should be set to a
          simple command or script like in PITR. <literal>pg_standby</> or similar tools
          that wait for the next WAL file to arrive cannot be used with
          streaming replication, as the server handles retries and waiting
          itself. Set <varname>restore_command</> as you would if you were
          recovering using a Continuous archiving backup (see <xref linkend="backup-pitr-recovery">).
         </para>
        </listitem>
       </varlistentry>
       <varlistentry id="primary-conninfo" xreflabel="primary_conninfo">
        <term><varname>primary_conninfo</varname> (<type>string</type>)</term>
        <listitem>
         <para>
          Specifies a connection string to be used for the standby server
          to connect with the primary. This string is in the same format as
          described in <xref linkend="libpq-connect">. If any option is
          unspecified in this string, then the corresponding environment
          variable (see <xref linkend="libpq-envars">) is checked. If the
          environment variable is not set either, then
          defaults are used.
         </para>
         <para>
          The built-in replication requires that a host name (or host address)
          or port number which the primary server listens on be
          specified in this string. Also ensure that a role with
          the <literal>SUPERUSER</> and <literal>LOGIN</> privileges on the
          primary is set (see
          <xref linkend="streaming-replication-authentication">). Note that
          the password needs to be set if the primary demands password
          authentication.
         </para>
         <para>
          This setting has no effect if <varname>standby_mode</> is <literal>off</>.
         </para>
        </listitem>
       </varlistentry>
       <varlistentry id="trigger-file" xreflabel="trigger_file">
        <term><varname>trigger_file</varname> (<type>string</type>)</term>
        <listitem>
         <para>
          Specifies a trigger file whose presence ends recovery in the
          standby. If no trigger file is specified, the standby never exits
          recovery.
          This setting has no effect if <varname>standby_mode</> is <literal>off</>.
         </para>
        </listitem>
       </varlistentry>
      </variablelist>
     </listitem>
     <listitem>
      <para>
       Start the <productname>PostgreSQL</> server on the standby. The standby
       server will go into recovery mode and proceed to receive WAL records
       from the primary and apply them continuously.
      </para>
     </listitem>
     </orderedlist>
    </para>
   </sect2>

   <sect2 id="streaming-replication-authentication">
    <title>Authentication</title>
    <para>
     It is very important that the access privilege for replication be setup
     properly so that only trusted users can read the WAL stream, because it is
     easy to extract privileged information from it.
    </para>
    <para>
     Only the superuser is allowed to connect to the primary as the replication
     standby. So a role with the <literal>SUPERUSER</> and <literal>LOGIN</>
     privileges needs to be created in the primary.
    </para>
    <para>
     Client authentication for replication is controlled by the
     <filename>pg_hba.conf</> record specifying <literal>replication</> in the
     <replaceable>database</> field. For example, if the standby is running on
     host IP <literal>192.168.1.100</> and the superuser's name for replication
     is <literal>foo</>, the administrator can add the following line to the
     <filename>pg_hba.conf</> file on the primary.

<programlisting>
# Allow the user "foo" from host 192.168.1.100 to connect to the primary
# as a replication standby if the user's password is correctly supplied.
#
# TYPE  DATABASE        USER            CIDR-ADDRESS            METHOD
host    replication     foo             192.168.1.100/32        md5
</programlisting>
    </para>
    <para>
     The host name and port number of the primary, connection user name,
     and password are specified in the <filename>recovery.conf</> file or
     the corresponding environment variable on the standby.
     For example, if the primary is running on host IP <literal>192.168.1.50</>,
     port <literal>5432</literal>, the superuser's name for replication is
     <literal>foo</>, and the password is <literal>foopass</>, the administrator
     can add the following line to the <filename>recovery.conf</> file on the
     standby.

<programlisting>
# The standby connects to the primary that is running on host 192.168.1.50
# and port 5432 as the user "foo" whose password is "foopass".
primary_conninfo = 'host=192.168.1.50 port=5432 user=foo password=foopass'
</programlisting>
    </para>
   </sect2>
  </sect1>

  <sect1 id="warm-standby-failover">
   <title>Failover</title>

   <para>
    If the primary server fails then the standby server should begin
    failover procedures.
   </para>

   <para>
    If the standby server fails then no failover need take place. If the
    standby server can be restarted, even some time later, then the recovery
    process can also be restarted immediately, taking advantage of
    restartable recovery. If the standby server cannot be restarted, then a
    full new standby server instance should be created.
   </para>

   <para>
    If the primary server fails and the standby server becomes the
    new primary, and then the old primary restarts, you must have
    a mechanism for informing the old primary that it is no longer the primary. This is
    sometimes known as <acronym>STONITH</> (Shoot The Other Node In The Head), which is
    necessary to avoid situations where both systems think they are the
    primary, which will lead to confusion and ultimately data loss.
   </para>

   <para>
    Many failover systems use just two systems, the primary and the standby,
    connected by some kind of heartbeat mechanism to continually verify the
    connectivity between the two and the viability of the primary. It is
    also possible to use a third system (called a witness server) to prevent
    some cases of inappropriate failover, but the additional complexity
    might not be worthwhile unless it is set up with sufficient care and
    rigorous testing.
   </para>

   <para>
    Once failover to the standby occurs, there is only a
    single server in operation. This is known as a degenerate state.
    The former standby is now the primary, but the former primary is down
    and might stay down.  To return to normal operation, a standby server
    must be recreated,
    either on the former primary system when it comes up, or on a third,
    possibly new, system. Once complete the primary and standby can be
    considered to have switched roles. Some people choose to use a third
    server to provide backup for the new primary until the new standby
    server is recreated,
    though clearly this complicates the system configuration and
    operational processes.
   </para>

   <para>
    So, switching from primary to standby server can be fast but requires
    some time to re-prepare the failover cluster. Regular switching from
    primary to standby is useful, since it allows regular downtime on
    each system for maintenance. This also serves as a test of the
    failover mechanism to ensure that it will really work when you need it.
    Written administration procedures are advised.
   </para>
  </sect1>

 <sect1 id="hot-standby">
  <title>Hot Standby</title>

  <indexterm zone="high-availability">
   <primary>Hot Standby</primary>
  </indexterm>

   <para>
    Hot Standby is the term used to describe the ability to connect to
    the server and run queries while the server is in archive recovery. This
    is useful for both log shipping replication and for restoring a backup
    to an exact state with great precision.
    The term Hot Standby also refers to the ability of the server to move
    from recovery through to normal running while users continue running
    queries and/or continue their connections.
   </para>

   <para>
    Running queries in recovery mode is similar to normal query operation,
    though there are a several usage and administrative differences
    noted below.
   </para>

  <sect2 id="hot-standby-users">
   <title>User's Overview</title>

   <para>
    Users can connect to the database server while it is in recovery
    mode and perform read-only queries. Read-only access to system
    catalogs and views will also occur as normal.
   </para>

   <para>
    The data on the standby takes some time to arrive from the primary server
    so there will be a measurable delay between primary and standby. Running the
    same query nearly simultaneously on both primary and standby might therefore
    return differing results. Eventually, the standby will be
    consistent with the primary.
    Queries executed on the standby will be correct with regard to the transactions
    that had been recovered at the start of the query, or start of first statement,
    in the case of serializable transactions. In comparison with the primary,
    the standby returns query results that could have been obtained on the primary
    at some moment in the past.
   </para>

   <para>
    When a transaction is started in recovery, the parameter
    <varname>transaction_read_only</> will be forced to be true, regardless of the
    <varname>default_transaction_read_only</> setting in <filename>postgresql.conf</>.
    It can't be manually set to false either. As a result, all transactions
    started during recovery will be limited to read-only actions. In all
    other ways, connected sessions will appear identical to sessions
    initiated during normal processing mode. There are no special commands
    required to initiate a connection so all interfaces
    work unchanged. After recovery finishes, the session
    will allow normal read-write transactions at the start of the next
    transaction, if these are requested.
   </para>

   <para>
    "Read-only" above means no writes to the permanent database tables.
    There are no problems with queries that use transient sort and
    work files.
   </para>

   <para>
    The following actions are allowed:

    <itemizedlist>
     <listitem>
      <para>
       Query access - <command>SELECT</>, <command>COPY TO</> including views and
       <command>SELECT</> rules
      </para>
     </listitem>
     <listitem>
      <para>
       Cursor commands - <command>DECLARE</>, <command>FETCH</>, <command>CLOSE</>
      </para>
     </listitem>
     <listitem>
      <para>
       Parameters - <command>SHOW</>, <command>SET</>, <command>RESET</>
      </para>
     </listitem>
     <listitem>
      <para>
       Transaction management commands
        <itemizedlist>
         <listitem>
          <para>
           <command>BEGIN</>, <command>END</>, <command>ABORT</>, <command>START TRANSACTION</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>SAVEPOINT</>, <command>RELEASE</>, <command>ROLLBACK TO SAVEPOINT</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>EXCEPTION</> blocks and other internal subtransactions
          </para>
         </listitem>
        </itemizedlist>
      </para>
     </listitem>
     <listitem>
      <para>
       <command>LOCK TABLE</>, though only when explicitly in one of these modes:
       <literal>ACCESS SHARE</>, <literal>ROW SHARE</> or <literal>ROW EXCLUSIVE</>.
      </para>
     </listitem>
     <listitem>
      <para>
       Plans and resources - <command>PREPARE</>, <command>EXECUTE</>,
       <command>DEALLOCATE</>, <command>DISCARD</>
      </para>
     </listitem>
     <listitem>
      <para>
       Plugins and extensions - <command>LOAD</>
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <para>
    These actions produce error messages:

    <itemizedlist>
     <listitem>
      <para>
       Data Manipulation Language (DML) - <command>INSERT</>,
       <command>UPDATE</>, <command>DELETE</>, <command>COPY FROM</>,
       <command>TRUNCATE</>.
       Note that there are no allowed actions that result in a trigger
       being executed during recovery.
      </para>
     </listitem>
     <listitem>
      <para>
       Data Definition Language (DDL) - <command>CREATE</>,
       <command>DROP</>, <command>ALTER</>, <command>COMMENT</>.
       This also applies to temporary tables also because currently their
       definition causes writes to catalog tables.
      </para>
     </listitem>
     <listitem>
      <para>
       <command>SELECT ... FOR SHARE | UPDATE</> which cause row locks to be written
      </para>
     </listitem>
     <listitem>
      <para>
       Rules on <command>SELECT</> statements that generate DML commands.
      </para>
     </listitem>
     <listitem>
      <para>
       <command>LOCK TABLE</>, in short default form, since it requests <literal>ACCESS EXCLUSIVE MODE</>.
       <command>LOCK TABLE</> that explicitly requests a mode higher than <literal>ROW EXCLUSIVE MODE</>.
      </para>
     </listitem>
     <listitem>
      <para>
       Transaction management commands that explicitly set non-read-only state:
        <itemizedlist>
         <listitem>
          <para>
            <command>BEGIN READ WRITE</>,
            <command>START TRANSACTION READ WRITE</>
          </para>
         </listitem>
         <listitem>
          <para>
            <command>SET TRANSACTION READ WRITE</>,
            <command>SET SESSION CHARACTERISTICS AS TRANSACTION READ WRITE</>
          </para>
         </listitem>
         <listitem>
          <para>
           <command>SET transaction_read_only = off</>
          </para>
         </listitem>
        </itemizedlist>
      </para>
     </listitem>
     <listitem>
      <para>
       Two-phase commit commands - <command>PREPARE TRANSACTION</>,
       <command>COMMIT PREPARED</>, <command>ROLLBACK PREPARED</>
       because even read-only transactions need to write WAL in the
       prepare phase (the first phase of two phase commit).
      </para>
     </listitem>
     <listitem>
      <para>
       sequence update - nextval()
      </para>
     </listitem>
     <listitem>
      <para>
       LISTEN, UNLISTEN, NOTIFY
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <para>
    Note that the current behaviour of read only transactions when not in
    recovery is to allow the last two actions, so there are small and
    subtle differences in behaviour between read-only transactions
    run on a standby and run during normal operation.
    It is possible that <command>LISTEN</>, <command>UNLISTEN</>,
    <command>NOTIFY</>, and temporary tables might be allowed in a
    future release.
   </para>

   <para>
    If failover or switchover occurs the database will switch to normal
    processing mode. Sessions will remain connected while the server
    changes mode. Current transactions will continue, though will remain
    read-only. After recovery is complete, it will be possible to initiate
    read-write transactions.
   </para>

   <para>
    Users will be able to tell whether their session is read-only by
    issuing <command>SHOW transaction_read_only</>.  In addition, a set of
    functions (<xref linkend="functions-recovery-info-table">) allow users to
    access information about the standby server. These allow you to write
    functions that are aware of the current state of the database. These
    can be used to monitor the progress of recovery, or to allow you to
    write complex programs that restore the database to particular states.
   </para>

   <para>
    In recovery, transactions will not be permitted to take any table lock
    higher than <literal>RowExclusiveLock</>. In addition, transactions may never assign
    a TransactionId and may never write WAL.
    Any <command>LOCK TABLE</> command that runs on the standby and requests
    a specific lock mode higher than <literal>ROW EXCLUSIVE MODE</> will be rejected.
   </para>

   <para>
    In general queries will not experience lock conflicts from the database
    changes made by recovery. This is because recovery follows normal
    concurrency control mechanisms, known as <acronym>MVCC</>. There are
    some types of change that will cause conflicts, covered in the following
    section.
   </para>
  </sect2>

  <sect2 id="hot-standby-conflict">
   <title>Handling query conflicts</title>

   <para>
    The primary and standby nodes are in many ways loosely connected. Actions
    on the primary will have an effect on the standby. As a result, there is
    potential for negative interactions or conflicts between them. The easiest
    conflict to understand is performance: if a huge data load is taking place
    on the primary then this will generate a similar stream of WAL records on the
    standby, so standby queries may contend for system resources, such as I/O.
   </para>

   <para>
    There are also additional types of conflict that can occur with Hot Standby.
    These conflicts are <emphasis>hard conflicts</> in the sense that queries
    might need to be cancelled and, in some cases, sessions disconnected to resolve them.
    The user is provided with several ways to handle these
    conflicts, though it is important to first understand the possible causes
    of conflicts:

      <itemizedlist>
       <listitem>
        <para>
         Access Exclusive Locks from primary node, including both explicit
         <command>LOCK</> commands and various <acronym>DDL</> actions
        </para>
       </listitem>
       <listitem>
        <para>
         Dropping tablespaces on the primary while standby queries are using
         those tablespaces for temporary work files (<varname>work_mem</> overflow)
        </para>
       </listitem>
       <listitem>
        <para>
         Dropping databases on the primary while users are connected to that
         database on the standby.
        </para>
       </listitem>
       <listitem>
        <para>
         Waiting to acquire buffer cleanup locks
        </para>
       </listitem>
       <listitem>
        <para>
         Early cleanup of data still visible to the current query's snapshot
        </para>
       </listitem>
      </itemizedlist>
   </para>

   <para>
    Some WAL redo actions will be for <acronym>DDL</> actions. These DDL actions are
    repeating actions that have already committed on the primary node, so
    they must not fail on the standby node. These DDL locks take priority
    and will automatically *cancel* any read-only transactions that get in
    their way, after a grace period. This is similar to the possibility of
    being canceled by the deadlock detector, but in this case the standby
    process always wins, since the replayed actions must not fail. This
    also ensures that replication does not fall behind while waiting for a
    query to complete. Again, the assumption is that the standby is
    primarily for high availability.
   </para>

   <para>
    An example of the above would be an Administrator on Primary server
    running <command>DROP TABLE</> on a table that is currently being queried
    on the standby server.
    Clearly the query cannot continue if <command>DROP TABLE</>
    proceeds. If this situation occurred on the primary, the <command>DROP TABLE</>
    would wait until the query had finished. When <command>DROP TABLE</> is
    run on the primary, the primary doesn't have
    information about which queries are running on the standby and so
    cannot wait for any of the standby queries. The WAL change records come through to the
    standby while the standby query is still running, causing a conflict.
   </para>

   <para>
    The most common reason for conflict between standby queries and WAL redo is
    "early cleanup". Normally, <productname>PostgreSQL</> allows cleanup of old
    row versions when there are no users who need to see them to ensure correct
    visibility of data (the heart of MVCC). If there is a standby query that has
    been running for longer than any query on the primary then it is possible
    for old row versions to be removed by either a vacuum or HOT. This will
    then generate WAL records that, if applied, would remove data on the
    standby that might <emphasis>potentially</> be required by the standby query.
    In more technical language, the primary's xmin horizon is later than
    the standby's xmin horizon, allowing dead rows to be removed.
   </para>

   <para>
    Experienced users should note that both row version cleanup and row version
    freezing will potentially conflict with recovery queries. Running a
    manual <command>VACUUM FREEZE</> is likely to cause conflicts even on tables
    with no updated or deleted rows.
   </para>

   <para>
    There are a number of choices for resolving query conflicts.  The default
    is to wait and hope the query finishes. The server will wait
    automatically until the lag between primary and standby is at most
    <varname>max_standby_delay</> seconds. Once that grace period expires,
    one of the following actions is taken:

      <itemizedlist>
       <listitem>
        <para>
         If the conflict is caused by a lock, the conflicting standby
         transaction is cancelled immediately. If the transaction is
         idle-in-transaction then the session is aborted
         instead, though this might change in the future.
        </para>
       </listitem>

       <listitem>
        <para>
         If the conflict is caused by cleanup records, the standby query is informed
         a conflict has occurred and that it must cancel itself to avoid the
         risk that it silently fails to read relevant data because
         that data has been removed. (This is regrettably similar to the
         much feared and iconic error message "snapshot too old"). Some cleanup
         records only conflict with older queries, while others
         can affect all queries.
        </para>

        <para>
         If cancellation does occur, the query and/or transaction can always
         be re-executed. The error is dynamic and will not necessarily reoccur
         if the query is executed again.
        </para>
       </listitem>
      </itemizedlist>
   </para>

   <para>
    <varname>max_standby_delay</> is set in <filename>postgresql.conf</>.
    The parameter applies to the server as a whole, so if the delay is consumed
    by a single query then there may be little or no waiting for queries that
    follow, though they will have benefited equally from the initial
    waiting period. The server may take time to catch up again before the grace
    period is available again, though if there is a heavy and constant stream
    of conflicts it may seldom catch up fully.
   </para>

   <para>
    Users should be clear that tables that are regularly and heavily updated on the
    primary server will quickly cause cancellation of longer running queries on
    the standby. In those cases <varname>max_standby_delay</> can be
    considered similar to setting
    <varname>statement_timeout</>.
    </para>

   <para>
    Other remedial actions exist if the number of cancellations is unacceptable.
    The first option is to connect to the primary server and keep a query active
    for as long as needed to run queries on the standby. This guarantees that
    a WAL cleanup record is never generated and query conflicts do not occur,
    as described above. This could be done using <filename>contrib/dblink</>
    and <function>pg_sleep()</>, or via other mechanisms. If you do this, you should note
    that this will delay cleanup of dead rows by vacuum or HOT and
    people might find this undesirable. However, remember that the
    primary and standby nodes are linked via the WAL, so this situation is no
    different from the case where the query ran on the primary node itself
    except for the benefit of off-loading the execution onto the standby.
   </para>

   <para>
    It is also possible to set <varname>vacuum_defer_cleanup_age</> on the primary
    to defer the cleanup of records by autovacuum, <command>VACUUM</>
    and HOT. This might allow
    more time for queries to execute before they are cancelled on the standby,
    without the need for setting a high <varname>max_standby_delay</>.
   </para>

   <para>
    Three-way deadlocks are possible between <literal>AccessExclusiveLocks</> arriving from
    the primary, cleanup WAL records that require buffer cleanup locks, and
    user requests that are waiting behind replayed <literal>AccessExclusiveLocks</>. Deadlocks
    are resolved by time-out when they exceed <varname>max_standby_delay</>.
   </para>

   <para>
    Dropping tablespaces or databases is discussed in the administrator's
    section since they are not typical user situations.
   </para>
  </sect2>

  <sect2 id="hot-standby-admin">
   <title>Administrator's Overview</title>

   <para>
    If there is a <filename>recovery.conf</> file present, the server will start
    in Hot Standby mode by default, though <varname>recovery_connections</> can
    be disabled via <filename>postgresql.conf</>. The server might take
    some time to enable recovery connections since the server must first complete
    sufficient recovery to provide a consistent state against which queries
    can run before enabling read only connections. Look for these messages
    in the server logs:

<programlisting>
LOG:  entering standby mode

... then some time later ...

LOG:  consistent recovery state reached
LOG:  database system is ready to accept read only connections
</programlisting>

    Consistency information is recorded once per checkpoint on the primary, as long
    as <varname>recovery_connections</> is enabled on the primary. If this parameter
    is disabled, it is not possible to enable recovery connections on the standby.
    Reaching a consistent state can also be delayed in the presence
    of both of these conditions:

      <itemizedlist>
       <listitem>
        <para>
         A write transaction has more than 64 subtransactions
        </para>
       </listitem>
       <listitem>
        <para>
         Very long-lived write transactions
        </para>
       </listitem>
      </itemizedlist>

    If you are running file-based log shipping ("warm standby"), you might need
    to wait until the next WAL file arrives, which could be as long as the
    <varname>archive_timeout</> setting on the primary.
   </para>

   <para>
    The setting of some parameters on the standby will need reconfiguration
    if they have been changed on the primary. For these parameters,
    the value on the standby must
    be equal to or greater than the value on the primary. If these parameters
    are not set high enough then the standby will not be able to process
    recovering transactions properly. If these values are set too low
    the server will halt. Higher values can then be supplied and the server
    restarted to begin recovery again.  The parameters are:

      <itemizedlist>
       <listitem>
        <para>
         <varname>max_connections</>
        </para>
       </listitem>
       <listitem>
        <para>
         <varname>max_prepared_transactions</>
        </para>
       </listitem>
       <listitem>
        <para>
         <varname>max_locks_per_transaction</>
        </para>
       </listitem>
      </itemizedlist>
   </para>

   <para>
    It is important that the administrator consider the appropriate setting
    of <varname>max_standby_delay</>, set in <filename>postgresql.conf</>.
    There is no optimal setting, so it should be set according to business
    priorities. For example if the server is primarily tasked as a High
    Availability server, then you may wish to lower
    <varname>max_standby_delay</> or even set it to zero, though that is a
    very aggressive setting. If the standby server is tasked as an additional
    server for decision support queries then it might be acceptable to set this
    to a value of many hours (in seconds).
   </para>

   <para>
    Transaction status "hint bits" written on the primary are not WAL-logged,
    so data on the standby will likely re-write the hints again on the standby.
    Thus, the standby server will still perform disk writes even though
    all users are read-only; no changes occur to the data values
    themselves.  Users will still write large sort temporary files and
    re-generate relcache info files, so no part of the database
    is truly read-only during hot standby mode. There is no restriction
    on the use of set returning functions, or other users of
    <function>tuplestore</>/<function>tuplesort</>
    code. Note also that writes to remote databases will still be possible,
    even though the transaction is read-only locally.
   </para>

   <para>
    The following types of administration commands are not accepted
    during recovery mode:

      <itemizedlist>
       <listitem>
        <para>
         Data Definition Language (DDL) - e.g. <command>CREATE INDEX</>
        </para>
       </listitem>
       <listitem>
        <para>
         Privilege and Ownership - <command>GRANT</>, <command>REVOKE</>,
         <command>REASSIGN</>
        </para>
       </listitem>
       <listitem>
        <para>
         Maintenance commands - <command>ANALYZE</>, <command>VACUUM</>,
         <command>CLUSTER</>, <command>REINDEX</>
        </para>
       </listitem>
      </itemizedlist>
   </para>

   <para>
    Again, note that some of these commands are actually allowed during
    "read only" mode transactions on the primary.
   </para>

   <para>
    As a result, you cannot create additional indexes that exist solely
    on the standby, nor can statistics exist solely on the standby.
    If these administration commands are needed they should be executed
    on the primary so that the changes will propagate to the
    standby.
   </para>

   <para>
    <function>pg_cancel_backend()</> will work on user backends, but not the
    Startup process, which performs recovery. <structname>pg_stat_activity</structname> does not
    show an entry for the Startup process, nor do recovering transactions
    show as active. As a result, <structname>pg_prepared_xacts</structname> is always empty during
    recovery. If you wish to resolve in-doubt prepared transactions,
    view <literal>pg_prepared_xacts</> on the primary and issue commands to
    resolve transactions there.
   </para>

   <para>
    <structname>pg_locks</structname> will show locks held by backends,
    as normal. <structname>pg_locks</structname> also shows
    a virtual transaction managed by the Startup process that owns all
    <literal>AccessExclusiveLocks</> held by transactions being replayed by recovery.
    Note that the Startup process does not acquire locks to
    make database changes, and thus locks other than <literal>AccessExclusiveLocks</>
    do not show in <structname>pg_locks</structname> for the Startup
    process; they are just presumed to exist.
   </para>

   <para>
    The <productname>Nagios</> plugin <productname>check_pgsql</> will
    work, but it is very simple.
    <productname>check_postgres</> will also work, though some actions
    could give different or confusing results.
    For example, last vacuum time will not be maintained, since no
    vacuum occurs on the standby (though vacuums running on the primary do
    send their changes to the standby).
   </para>

   <para>
    WAL file control commands will not work during recovery,
    e.g. <function>pg_start_backup</>, <function>pg_switch_xlog</> etc.
   </para>

   <para>
    Dynamically loadable modules work, including <structname>pg_stat_statements</>.
   </para>

   <para>
    Advisory locks work normally in recovery, including deadlock detection.
    Note that advisory locks are never WAL logged, so it is impossible for
    an advisory lock on either the primary or the standby to conflict with WAL
    replay. Nor is it possible to acquire an advisory lock on the primary
    and have it initiate a similar advisory lock on the standby. Advisory
    locks relate only to the server on which they are acquired.
   </para>

   <para>
    Trigger-based replication systems such as <productname>Slony</>,
    <productname>Londiste</> and <productname>Bucardo</> won't run on the
    standby at all, though they will run happily on the primary server as
    long as the changes are not sent to standby servers to be applied.
    WAL replay is not trigger-based so you cannot relay from the
    standby to any system that requires additional database writes or
    relies on the use of triggers.
   </para>

   <para>
    New oids cannot be assigned, though some <acronym>UUID</> generators may still
    work as long as they do not rely on writing new status to the database.
   </para>

   <para>
    Currently, temporary table creation is not allowed during read only
    transactions, so in some cases existing scripts will not run correctly.
    This restriction might be relaxed in a later release. This is
    both a SQL Standard compliance issue and a technical issue.
   </para>

   <para>
    <command>DROP TABLESPACE</> can only succeed if the tablespace is empty.
    Some standby users may be actively using the tablespace via their
    <varname>temp_tablespaces</> parameter. If there are temporary files in the
    tablespace, all active queries are cancelled to ensure that temporary
    files are removed, so the tablespace can be removed and WAL replay
    can continue.
   </para>

   <para>
    Running <command>DROP DATABASE</>, <command>ALTER DATABASE ... SET TABLESPACE</>,
    or <command>ALTER DATABASE ... RENAME</> on primary will generate a log message
    that will cause all users connected to that database on the standby to be
    forcibly disconnected. This action occurs immediately, whatever the setting of
    <varname>max_standby_delay</>.
   </para>

   <para>
    In normal (non-recovery) mode, if you issue <command>DROP USER</> or <command>DROP ROLE</>
    for a role with login capability while that user is still connected then
    nothing happens to the connected user - they remain connected. The user cannot
    reconnect however. This behaviour applies in recovery also, so a
    <command>DROP USER</> on the primary does not disconnect that user on the standby.
   </para>

   <para>
    The statististics collector is active during recovery. All scans, reads, blocks,
    index usage, etc., will be recorded normally on the standby. Replayed
    actions will not duplicate their effects on primary, so replaying an
    insert will not increment the Inserts column of pg_stat_user_tables.
    The stats file is deleted at the start of recovery, so stats from primary
    and standby will differ; this is considered a feature, not a bug.
   </para>

   <para>
    Autovacuum is not active during recovery, though it will start normally
    at the end of recovery.
   </para>

   <para>
    The background writer is active during recovery and will perform
    restartpoints (similar to checkpoints on the primary) and normal block
    cleaning activities. (Remember, hint bits will cause blocks to
    be modified on the standby server.)
    The <command>CHECKPOINT</> command is accepted during recovery,
    though it performs a restartpoint rather than a new checkpoint.
   </para>
  </sect2>

  <sect2 id="hot-standby-parameters">
   <title>Hot Standby Parameter Reference</title>

   <para>
    Various parameters have been mentioned above in <xref linkend="hot-standby-admin">
    and <xref linkend="hot-standby-conflict">.
   </para>

   <para>
    On the primary, parameters <varname>recovery_connections</> and
    <varname>vacuum_defer_cleanup_age</> can be used.
    <varname>max_standby_delay</> has no effect if set on the primary.
   </para>

   <para>
    On the standby, parameters <varname>recovery_connections</> and
    <varname>max_standby_delay</> can be used.
    <varname>vacuum_defer_cleanup_age</> has no effect during recovery.
   </para>
  </sect2>

  <sect2 id="hot-standby-caveats">
   <title>Caveats</title>

   <para>
    There are several limitations of Hot Standby.
    These can and probably will be fixed in future releases:

  <itemizedlist>
   <listitem>
    <para>
     Operations on hash indexes are not presently WAL-logged, so
     replay will not update these indexes.  Hash indexes will not be
     used for query plans during recovery.
    </para>
   </listitem>
   <listitem>
    <para>
     Full knowledge of running transactions is required before snapshots
     can be taken. Transactions that use large numbers of subtransactions
     (currently greater than 64) will delay the start of read only
     connections until the completion of the longest running write transaction.
     If this situation occurs, explanatory messages will be sent to the server log.
    </para>
   </listitem>
   <listitem>
    <para>
     Valid starting points for recovery connections are generated at each
     checkpoint on the master. If the standby is shut down while the master
     is in a shutdown state it might not be possible to re-enter Hot Standby
     until the primary is started up so that it generates further starting
     points in the WAL logs. This is not considered a serious issue
     because the standby is usually switched to act as primary when
     the first node is taken down.
    </para>
   </listitem>
   <listitem>
    <para>
     At the end of recovery, <literal>AccessExclusiveLocks</> held by prepared transactions
     will require twice the normal number of lock table entries. If you plan
     on running either a large number of concurrent prepared transactions
     that normally take <literal>AccessExclusiveLocks</>, or you plan on having one
     large transaction that takes many <literal>AccessExclusiveLocks</>, you are
     advised to select a larger value of <varname>max_locks_per_transaction</>,
     up to, but never more than twice the value of the parameter setting on
     the primary server. You need not consider this at all if
     your setting of <varname>max_prepared_transactions</> is <literal>0</>.
    </para>
   </listitem>
  </itemizedlist>

   </para>
  </sect2>

 </sect1>

  <sect1 id="backup-incremental-updated">
   <title>Incrementally Updated Backups</title>

  <indexterm zone="high-availability">
   <primary>incrementally updated backups</primary>
  </indexterm>

  <indexterm zone="high-availability">
   <primary>change accumulation</primary>
  </indexterm>

   <para>
    In a warm standby configuration, it is possible to offload the expense of
    taking periodic base backups from the primary server; instead base backups
    can be made by backing
    up a standby server's files.  This concept is generally known as
    incrementally updated backups, log change accumulation, or more simply,
    change accumulation.
   </para>

   <para>
    If we take a file system backup of the standby server's data
    directory while it is processing
    logs shipped from the primary, we will be able to reload that backup and
    restart the standby's recovery process from the last restart point.
    We no longer need to keep WAL files from before the standby's restart point.
    If recovery is needed, it will be faster to recover from the incrementally
    updated backup than from the original base backup.
   </para>

   <para>
    Since the standby server is not <quote>live</>, it is not possible to
    use <function>pg_start_backup()</> and <function>pg_stop_backup()</>
    to manage the backup process; it will be up to you to determine how
    far back you need to keep WAL segment files to have a recoverable
    backup.  You can do this by running <application>pg_controldata</>
    on the standby server to inspect the control file and determine the
    current checkpoint WAL location, or by using the
    <varname>log_checkpoints</> option to print values to the standby's
    server log.
   </para>
  </sect1>

</chapter>
