/*-------------------------------------------------------------------------
 *
 * setrefs.c
 *	  Post-processing of a completed plan tree: fix references to subplan
 *	  vars, compute regproc values for operators, etc
 *
 * Portions Copyright (c) 1996-2011, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/optimizer/plan/setrefs.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include "access/hash.h"
#include "access/transam.h"
#include "catalog/pg_type.h"
#include "nodes/makefuncs.h"
#include "nodes/nodeFuncs.h"
#include "optimizer/pathnode.h"
#include "optimizer/planmain.h"
#include "optimizer/tlist.h"
#include "utils/lsyscache.h"
#include "utils/syscache.h"


typedef struct
{
	Index		varno;			/* RT index of Var */
	AttrNumber	varattno;		/* attr number of Var */
	AttrNumber	resno;			/* TLE position of Var */
} tlist_vinfo;

typedef struct
{
	List	   *tlist;			/* underlying target list */
	int			num_vars;		/* number of plain Var tlist entries */
	bool		has_ph_vars;	/* are there PlaceHolderVar entries? */
	bool		has_non_vars;	/* are there other entries? */
	/* array of num_vars entries: */
	tlist_vinfo vars[1];		/* VARIABLE LENGTH ARRAY */
} indexed_tlist;				/* VARIABLE LENGTH STRUCT */

typedef struct
{
	PlannerInfo *root;
	int			rtoffset;
} fix_scan_expr_context;

typedef struct
{
	PlannerInfo *root;
	indexed_tlist *outer_itlist;
	indexed_tlist *inner_itlist;
	Index		acceptable_rel;
	int			rtoffset;
} fix_join_expr_context;

typedef struct
{
	PlannerInfo *root;
	indexed_tlist *subplan_itlist;
	Index		newvarno;
	int			rtoffset;
} fix_upper_expr_context;

/*
 * Check if a Const node is a regclass value.  We accept plain OID too,
 * since a regclass Const will get folded to that type if it's an argument
 * to oideq or similar operators.  (This might result in some extraneous
 * values in a plan's list of relation dependencies, but the worst result
 * would be occasional useless replans.)
 */
#define ISREGCLASSCONST(con) \
	(((con)->consttype == REGCLASSOID || (con)->consttype == OIDOID) && \
	 !(con)->constisnull)

#define fix_scan_list(root, lst, rtoffset) \
	((List *) fix_scan_expr(root, (Node *) (lst), rtoffset))

static Plan *set_plan_refs(PlannerInfo *root, Plan *plan, int rtoffset);
static Plan *set_indexonlyscan_references(PlannerInfo *root,
							 IndexOnlyScan *plan,
							 int rtoffset);
static Plan *set_subqueryscan_references(PlannerInfo *root,
							SubqueryScan *plan,
							int rtoffset);
static bool trivial_subqueryscan(SubqueryScan *plan);
static Node *fix_scan_expr(PlannerInfo *root, Node *node, int rtoffset);
static Node *fix_scan_expr_mutator(Node *node, fix_scan_expr_context *context);
static bool fix_scan_expr_walker(Node *node, fix_scan_expr_context *context);
static void set_join_references(PlannerInfo *root, Join *join, int rtoffset);
static void set_upper_references(PlannerInfo *root, Plan *plan, int rtoffset);
static void set_dummy_tlist_references(Plan *plan, int rtoffset);
static indexed_tlist *build_tlist_index(List *tlist);
static Var *search_indexed_tlist_for_var(Var *var,
							 indexed_tlist *itlist,
							 Index newvarno,
							 int rtoffset);
static Var *search_indexed_tlist_for_non_var(Node *node,
								 indexed_tlist *itlist,
								 Index newvarno);
static Var *search_indexed_tlist_for_sortgroupref(Node *node,
									  Index sortgroupref,
									  indexed_tlist *itlist,
									  Index newvarno);
static List *fix_join_expr(PlannerInfo *root,
			  List *clauses,
			  indexed_tlist *outer_itlist,
			  indexed_tlist *inner_itlist,
			  Index acceptable_rel, int rtoffset);
static Node *fix_join_expr_mutator(Node *node,
					  fix_join_expr_context *context);
static Node *fix_upper_expr(PlannerInfo *root,
			   Node *node,
			   indexed_tlist *subplan_itlist,
			   Index newvarno,
			   int rtoffset);
static Node *fix_upper_expr_mutator(Node *node,
					   fix_upper_expr_context *context);
static bool fix_opfuncids_walker(Node *node, void *context);
static bool extract_query_dependencies_walker(Node *node,
								  PlannerInfo *context);


/*****************************************************************************
 *
 *		SUBPLAN REFERENCES
 *
 *****************************************************************************/

/*
 * set_plan_references
 *
 * This is the final processing pass of the planner/optimizer.	The plan
 * tree is complete; we just have to adjust some representational details
 * for the convenience of the executor:
 *
 * 1. We flatten the various subquery rangetables into a single list, and
 * zero out RangeTblEntry fields that are not useful to the executor.
 *
 * 2. We adjust Vars in scan nodes to be consistent with the flat rangetable.
 *
 * 3. We adjust Vars in upper plan nodes to refer to the outputs of their
 * subplans.
 *
 * 4. We compute regproc OIDs for operators (ie, we look up the function
 * that implements each op).
 *
 * 5. We create lists of specific objects that the plan depends on.
 * This will be used by plancache.c to drive invalidation of cached plans.
 * Relation dependencies are represented by OIDs, and everything else by
 * PlanInvalItems (this distinction is motivated by the shared-inval APIs).
 * Currently, relations and user-defined functions are the only types of
 * objects that are explicitly tracked this way.
 *
 * We also perform one final optimization step, which is to delete
 * SubqueryScan plan nodes that aren't doing anything useful (ie, have
 * no qual and a no-op targetlist).  The reason for doing this last is that
 * it can't readily be done before set_plan_references, because it would
 * break set_upper_references: the Vars in the subquery's top tlist
 * wouldn't match up with the Vars in the outer plan tree.  The SubqueryScan
 * serves a necessary function as a buffer between outer query and subquery
 * variable numbering ... but after we've flattened the rangetable this is
 * no longer a problem, since then there's only one rtindex namespace.
 *
 * set_plan_references recursively traverses the whole plan tree.
 *
 * The return value is normally the same Plan node passed in, but can be
 * different when the passed-in Plan is a SubqueryScan we decide isn't needed.
 *
 * The flattened rangetable entries are appended to root->glob->finalrtable.
 * Also, rowmarks entries are appended to root->glob->finalrowmarks, and the
 * RT indexes of ModifyTable result relations to root->glob->resultRelations.
 * Plan dependencies are appended to root->glob->relationOids (for relations)
 * and root->glob->invalItems (for everything else).
 *
 * Notice that we modify Plan nodes in-place, but use expression_tree_mutator
 * to process targetlist and qual expressions.	We can assume that the Plan
 * nodes were just built by the planner and are not multiply referenced, but
 * it's not so safe to assume that for expression tree nodes.
 */
Plan *
set_plan_references(PlannerInfo *root, Plan *plan)
{
	PlannerGlobal *glob = root->glob;
	int			rtoffset = list_length(glob->finalrtable);
	ListCell   *lc;

	/*
	 * In the flat rangetable, we zero out substructure pointers that are not
	 * needed by the executor; this reduces the storage space and copying cost
	 * for cached plans.  We keep only the alias and eref Alias fields, which
	 * are needed by EXPLAIN, and the selectedCols and modifiedCols bitmaps,
	 * which are needed for executor-startup permissions checking and for
	 * trigger event checking.
	 */
	foreach(lc, root->parse->rtable)
	{
		RangeTblEntry *rte = (RangeTblEntry *) lfirst(lc);
		RangeTblEntry *newrte;

		/* flat copy to duplicate all the scalar fields */
		newrte = (RangeTblEntry *) palloc(sizeof(RangeTblEntry));
		memcpy(newrte, rte, sizeof(RangeTblEntry));

		/* zap unneeded sub-structure */
		newrte->subquery = NULL;
		newrte->joinaliasvars = NIL;
		newrte->funcexpr = NULL;
		newrte->funccoltypes = NIL;
		newrte->funccoltypmods = NIL;
		newrte->funccolcollations = NIL;
		newrte->values_lists = NIL;
		newrte->values_collations = NIL;
		newrte->ctecoltypes = NIL;
		newrte->ctecoltypmods = NIL;
		newrte->ctecolcollations = NIL;

		glob->finalrtable = lappend(glob->finalrtable, newrte);

		/*
		 * If it's a plain relation RTE, add the table to relationOids.
		 *
		 * We do this even though the RTE might be unreferenced in the plan
		 * tree; this would correspond to cases such as views that were
		 * expanded, child tables that were eliminated by constraint
		 * exclusion, etc.	Schema invalidation on such a rel must still force
		 * rebuilding of the plan.
		 *
		 * Note we don't bother to avoid duplicate list entries.  We could,
		 * but it would probably cost more cycles than it would save.
		 */
		if (newrte->rtekind == RTE_RELATION)
			glob->relationOids = lappend_oid(glob->relationOids,
											 newrte->relid);
	}

	/*
	 * Check for RT index overflow; it's very unlikely, but if it did happen,
	 * the executor would get confused by varnos that match the special varno
	 * values.
	 */
	if (IS_SPECIAL_VARNO(list_length(glob->finalrtable)))
		ereport(ERROR,
				(errcode(ERRCODE_PROGRAM_LIMIT_EXCEEDED),
				 errmsg("too many range table entries")));

	/*
	 * Adjust RT indexes of PlanRowMarks and add to final rowmarks list
	 */
	foreach(lc, root->rowMarks)
	{
		PlanRowMark *rc = (PlanRowMark *) lfirst(lc);
		PlanRowMark *newrc;

		Assert(IsA(rc, PlanRowMark));

		/* flat copy is enough since all fields are scalars */
		newrc = (PlanRowMark *) palloc(sizeof(PlanRowMark));
		memcpy(newrc, rc, sizeof(PlanRowMark));

		/* adjust indexes ... but *not* the rowmarkId */
		newrc->rti += rtoffset;
		newrc->prti += rtoffset;

		glob->finalrowmarks = lappend(glob->finalrowmarks, newrc);
	}

	/* Now fix the Plan tree */
	return set_plan_refs(root, plan, rtoffset);
}

/*
 * set_plan_refs: recurse through the Plan nodes of a single subquery level
 */
static Plan *
set_plan_refs(PlannerInfo *root, Plan *plan, int rtoffset)
{
	ListCell   *l;

	if (plan == NULL)
		return NULL;

	/*
	 * Plan-type-specific fixes
	 */
	switch (nodeTag(plan))
	{
		case T_SeqScan:
			{
				SeqScan    *splan = (SeqScan *) plan;

				splan->scanrelid += rtoffset;
				splan->plan.targetlist =
					fix_scan_list(root, splan->plan.targetlist, rtoffset);
				splan->plan.qual =
					fix_scan_list(root, splan->plan.qual, rtoffset);
			}
			break;
		case T_IndexScan:
			{
				IndexScan  *splan = (IndexScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
				splan->indexqual =
					fix_scan_list(root, splan->indexqual, rtoffset);
				splan->indexqualorig =
					fix_scan_list(root, splan->indexqualorig, rtoffset);
				splan->indexorderby =
					fix_scan_list(root, splan->indexorderby, rtoffset);
				splan->indexorderbyorig =
					fix_scan_list(root, splan->indexorderbyorig, rtoffset);
			}
			break;
		case T_IndexOnlyScan:
			{
				IndexOnlyScan  *splan = (IndexOnlyScan *) plan;

				return set_indexonlyscan_references(root, splan, rtoffset);
			}
			break;
		case T_BitmapIndexScan:
			{
				BitmapIndexScan *splan = (BitmapIndexScan *) plan;

				splan->scan.scanrelid += rtoffset;
				/* no need to fix targetlist and qual */
				Assert(splan->scan.plan.targetlist == NIL);
				Assert(splan->scan.plan.qual == NIL);
				splan->indexqual =
					fix_scan_list(root, splan->indexqual, rtoffset);
				splan->indexqualorig =
					fix_scan_list(root, splan->indexqualorig, rtoffset);
			}
			break;
		case T_BitmapHeapScan:
			{
				BitmapHeapScan *splan = (BitmapHeapScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
				splan->bitmapqualorig =
					fix_scan_list(root, splan->bitmapqualorig, rtoffset);
			}
			break;
		case T_TidScan:
			{
				TidScan    *splan = (TidScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
				splan->tidquals =
					fix_scan_list(root, splan->tidquals, rtoffset);
			}
			break;
		case T_SubqueryScan:
			/* Needs special treatment, see comments below */
			return set_subqueryscan_references(root,
											   (SubqueryScan *) plan,
											   rtoffset);
		case T_FunctionScan:
			{
				FunctionScan *splan = (FunctionScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
				splan->funcexpr =
					fix_scan_expr(root, splan->funcexpr, rtoffset);
			}
			break;
		case T_ValuesScan:
			{
				ValuesScan *splan = (ValuesScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
				splan->values_lists =
					fix_scan_list(root, splan->values_lists, rtoffset);
			}
			break;
		case T_CteScan:
			{
				CteScan    *splan = (CteScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
			}
			break;
		case T_WorkTableScan:
			{
				WorkTableScan *splan = (WorkTableScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
			}
			break;
		case T_ForeignScan:
			{
				ForeignScan *splan = (ForeignScan *) plan;

				splan->scan.scanrelid += rtoffset;
				splan->scan.plan.targetlist =
					fix_scan_list(root, splan->scan.plan.targetlist, rtoffset);
				splan->scan.plan.qual =
					fix_scan_list(root, splan->scan.plan.qual, rtoffset);
			}
			break;

		case T_NestLoop:
		case T_MergeJoin:
		case T_HashJoin:
			set_join_references(root, (Join *) plan, rtoffset);
			break;

		case T_Hash:
		case T_Material:
		case T_Sort:
		case T_Unique:
		case T_SetOp:

			/*
			 * These plan types don't actually bother to evaluate their
			 * targetlists, because they just return their unmodified input
			 * tuples.	Even though the targetlist won't be used by the
			 * executor, we fix it up for possible use by EXPLAIN (not to
			 * mention ease of debugging --- wrong varnos are very confusing).
			 */
			set_dummy_tlist_references(plan, rtoffset);

			/*
			 * Since these plan types don't check quals either, we should not
			 * find any qual expression attached to them.
			 */
			Assert(plan->qual == NIL);
			break;
		case T_LockRows:
			{
				LockRows   *splan = (LockRows *) plan;

				/*
				 * Like the plan types above, LockRows doesn't evaluate its
				 * tlist or quals.	But we have to fix up the RT indexes in
				 * its rowmarks.
				 */
				set_dummy_tlist_references(plan, rtoffset);
				Assert(splan->plan.qual == NIL);

				foreach(l, splan->rowMarks)
				{
					PlanRowMark *rc = (PlanRowMark *) lfirst(l);

					rc->rti += rtoffset;
					rc->prti += rtoffset;
				}
			}
			break;
		case T_Limit:
			{
				Limit	   *splan = (Limit *) plan;

				/*
				 * Like the plan types above, Limit doesn't evaluate its tlist
				 * or quals.  It does have live expressions for limit/offset,
				 * however; and those cannot contain subplan variable refs, so
				 * fix_scan_expr works for them.
				 */
				set_dummy_tlist_references(plan, rtoffset);
				Assert(splan->plan.qual == NIL);

				splan->limitOffset =
					fix_scan_expr(root, splan->limitOffset, rtoffset);
				splan->limitCount =
					fix_scan_expr(root, splan->limitCount, rtoffset);
			}
			break;
		case T_Agg:
		case T_Group:
			set_upper_references(root, plan, rtoffset);
			break;
		case T_WindowAgg:
			{
				WindowAgg  *wplan = (WindowAgg *) plan;

				set_upper_references(root, plan, rtoffset);

				/*
				 * Like Limit node limit/offset expressions, WindowAgg has
				 * frame offset expressions, which cannot contain subplan
				 * variable refs, so fix_scan_expr works for them.
				 */
				wplan->startOffset =
					fix_scan_expr(root, wplan->startOffset, rtoffset);
				wplan->endOffset =
					fix_scan_expr(root, wplan->endOffset, rtoffset);
			}
			break;
		case T_Result:
			{
				Result	   *splan = (Result *) plan;

				/*
				 * Result may or may not have a subplan; if not, it's more
				 * like a scan node than an upper node.
				 */
				if (splan->plan.lefttree != NULL)
					set_upper_references(root, plan, rtoffset);
				else
				{
					splan->plan.targetlist =
						fix_scan_list(root, splan->plan.targetlist, rtoffset);
					splan->plan.qual =
						fix_scan_list(root, splan->plan.qual, rtoffset);
				}
				/* resconstantqual can't contain any subplan variable refs */
				splan->resconstantqual =
					fix_scan_expr(root, splan->resconstantqual, rtoffset);
			}
			break;
		case T_ModifyTable:
			{
				ModifyTable *splan = (ModifyTable *) plan;

				/*
				 * planner.c already called set_returning_clause_references,
				 * so we should not process either the targetlist or the
				 * returningLists.
				 */
				Assert(splan->plan.qual == NIL);

				foreach(l, splan->resultRelations)
				{
					lfirst_int(l) += rtoffset;
				}
				foreach(l, splan->rowMarks)
				{
					PlanRowMark *rc = (PlanRowMark *) lfirst(l);

					rc->rti += rtoffset;
					rc->prti += rtoffset;
				}
				foreach(l, splan->plans)
				{
					lfirst(l) = set_plan_refs(root,
											  (Plan *) lfirst(l),
											  rtoffset);
				}

				/*
				 * Append this ModifyTable node's final result relation RT
				 * index(es) to the global list for the plan, and set its
				 * resultRelIndex to reflect their starting position in the
				 * global list.
				 */
				splan->resultRelIndex = list_length(root->glob->resultRelations);
				root->glob->resultRelations =
					list_concat(root->glob->resultRelations,
								list_copy(splan->resultRelations));
			}
			break;
		case T_Append:
			{
				Append	   *splan = (Append *) plan;

				/*
				 * Append, like Sort et al, doesn't actually evaluate its
				 * targetlist or check quals.
				 */
				set_dummy_tlist_references(plan, rtoffset);
				Assert(splan->plan.qual == NIL);
				foreach(l, splan->appendplans)
				{
					lfirst(l) = set_plan_refs(root,
											  (Plan *) lfirst(l),
											  rtoffset);
				}
			}
			break;
		case T_MergeAppend:
			{
				MergeAppend *splan = (MergeAppend *) plan;

				/*
				 * MergeAppend, like Sort et al, doesn't actually evaluate its
				 * targetlist or check quals.
				 */
				set_dummy_tlist_references(plan, rtoffset);
				Assert(splan->plan.qual == NIL);
				foreach(l, splan->mergeplans)
				{
					lfirst(l) = set_plan_refs(root,
											  (Plan *) lfirst(l),
											  rtoffset);
				}
			}
			break;
		case T_RecursiveUnion:
			/* This doesn't evaluate targetlist or check quals either */
			set_dummy_tlist_references(plan, rtoffset);
			Assert(plan->qual == NIL);
			break;
		case T_BitmapAnd:
			{
				BitmapAnd  *splan = (BitmapAnd *) plan;

				/* BitmapAnd works like Append, but has no tlist */
				Assert(splan->plan.targetlist == NIL);
				Assert(splan->plan.qual == NIL);
				foreach(l, splan->bitmapplans)
				{
					lfirst(l) = set_plan_refs(root,
											  (Plan *) lfirst(l),
											  rtoffset);
				}
			}
			break;
		case T_BitmapOr:
			{
				BitmapOr   *splan = (BitmapOr *) plan;

				/* BitmapOr works like Append, but has no tlist */
				Assert(splan->plan.targetlist == NIL);
				Assert(splan->plan.qual == NIL);
				foreach(l, splan->bitmapplans)
				{
					lfirst(l) = set_plan_refs(root,
											  (Plan *) lfirst(l),
											  rtoffset);
				}
			}
			break;
		default:
			elog(ERROR, "unrecognized node type: %d",
				 (int) nodeTag(plan));
			break;
	}

	/*
	 * Now recurse into child plans, if any
	 *
	 * NOTE: it is essential that we recurse into child plans AFTER we set
	 * subplan references in this plan's tlist and quals.  If we did the
	 * reference-adjustments bottom-up, then we would fail to match this
	 * plan's var nodes against the already-modified nodes of the children.
	 */
	plan->lefttree = set_plan_refs(root, plan->lefttree, rtoffset);
	plan->righttree = set_plan_refs(root, plan->righttree, rtoffset);

	return plan;
}

/*
 * set_indexonlyscan_references
 *		Do set_plan_references processing on an IndexOnlyScan
 *
 * This is unlike the handling of a plain IndexScan because we have to
 * convert Vars referencing the heap into Vars referencing the index.
 * We can use the fix_upper_expr machinery for that, by working from a
 * targetlist describing the index columns.
 */
static Plan *
set_indexonlyscan_references(PlannerInfo *root,
							 IndexOnlyScan *plan,
							 int rtoffset)
{
	indexed_tlist *index_itlist;

	index_itlist = build_tlist_index(plan->indextlist);

	plan->scan.scanrelid += rtoffset;
	plan->scan.plan.targetlist = (List *)
		fix_upper_expr(root,
					   (Node *) plan->scan.plan.targetlist,
					   index_itlist,
					   INDEX_VAR,
					   rtoffset);
	plan->scan.plan.qual = (List *)
		fix_upper_expr(root,
					   (Node *) plan->scan.plan.qual,
					   index_itlist,
					   INDEX_VAR,
					   rtoffset);
	/* indexqual is already transformed to reference index columns */
	plan->indexqual = fix_scan_list(root, plan->indexqual, rtoffset);
	/* indexorderby is already transformed to reference index columns */
	plan->indexorderby = fix_scan_list(root, plan->indexorderby, rtoffset);
	/* indextlist must NOT be transformed to reference index columns */
	plan->indextlist = fix_scan_list(root, plan->indextlist, rtoffset);

	pfree(index_itlist);

	return (Plan *) plan;
}

/*
 * set_subqueryscan_references
 *		Do set_plan_references processing on a SubqueryScan
 *
 * We try to strip out the SubqueryScan entirely; if we can't, we have
 * to do the normal processing on it.
 */
static Plan *
set_subqueryscan_references(PlannerInfo *root,
							SubqueryScan *plan,
							int rtoffset)
{
	RelOptInfo *rel;
	Plan	   *result;

	/* Need to look up the subquery's RelOptInfo, since we need its subroot */
	rel = find_base_rel(root, plan->scan.scanrelid);
	Assert(rel->subplan == plan->subplan);

	/* Recursively process the subplan */
	plan->subplan = set_plan_references(rel->subroot, plan->subplan);

	if (trivial_subqueryscan(plan))
	{
		/*
		 * We can omit the SubqueryScan node and just pull up the subplan.
		 */
		ListCell   *lp,
				   *lc;

		result = plan->subplan;

		/* We have to be sure we don't lose any initplans */
		result->initPlan = list_concat(plan->scan.plan.initPlan,
									   result->initPlan);

		/*
		 * We also have to transfer the SubqueryScan's result-column names
		 * into the subplan, else columns sent to client will be improperly
		 * labeled if this is the topmost plan level.  Copy the "source
		 * column" information too.
		 */
		forboth(lp, plan->scan.plan.targetlist, lc, result->targetlist)
		{
			TargetEntry *ptle = (TargetEntry *) lfirst(lp);
			TargetEntry *ctle = (TargetEntry *) lfirst(lc);

			ctle->resname = ptle->resname;
			ctle->resorigtbl = ptle->resorigtbl;
			ctle->resorigcol = ptle->resorigcol;
		}
	}
	else
	{
		/*
		 * Keep the SubqueryScan node.	We have to do the processing that
		 * set_plan_references would otherwise have done on it.  Notice we do
		 * not do set_upper_references() here, because a SubqueryScan will
		 * always have been created with correct references to its subplan's
		 * outputs to begin with.
		 */
		plan->scan.scanrelid += rtoffset;
		plan->scan.plan.targetlist =
			fix_scan_list(root, plan->scan.plan.targetlist, rtoffset);
		plan->scan.plan.qual =
			fix_scan_list(root, plan->scan.plan.qual, rtoffset);

		result = (Plan *) plan;
	}

	return result;
}

/*
 * trivial_subqueryscan
 *		Detect whether a SubqueryScan can be deleted from the plan tree.
 *
 * We can delete it if it has no qual to check and the targetlist just
 * regurgitates the output of the child plan.
 */
static bool
trivial_subqueryscan(SubqueryScan *plan)
{
	int			attrno;
	ListCell   *lp,
			   *lc;

	if (plan->scan.plan.qual != NIL)
		return false;

	if (list_length(plan->scan.plan.targetlist) !=
		list_length(plan->subplan->targetlist))
		return false;			/* tlists not same length */

	attrno = 1;
	forboth(lp, plan->scan.plan.targetlist, lc, plan->subplan->targetlist)
	{
		TargetEntry *ptle = (TargetEntry *) lfirst(lp);
		TargetEntry *ctle = (TargetEntry *) lfirst(lc);

		if (ptle->resjunk != ctle->resjunk)
			return false;		/* tlist doesn't match junk status */

		/*
		 * We accept either a Var referencing the corresponding element of the
		 * subplan tlist, or a Const equaling the subplan element. See
		 * generate_setop_tlist() for motivation.
		 */
		if (ptle->expr && IsA(ptle->expr, Var))
		{
			Var		   *var = (Var *) ptle->expr;

			Assert(var->varno == plan->scan.scanrelid);
			Assert(var->varlevelsup == 0);
			if (var->varattno != attrno)
				return false;	/* out of order */
		}
		else if (ptle->expr && IsA(ptle->expr, Const))
		{
			if (!equal(ptle->expr, ctle->expr))
				return false;
		}
		else
			return false;

		attrno++;
	}

	return true;
}

/*
 * copyVar
 *		Copy a Var node.
 *
 * fix_scan_expr and friends do this enough times that it's worth having
 * a bespoke routine instead of using the generic copyObject() function.
 */
static inline Var *
copyVar(Var *var)
{
	Var		   *newvar = (Var *) palloc(sizeof(Var));

	*newvar = *var;
	return newvar;
}

/*
 * fix_expr_common
 *		Do generic set_plan_references processing on an expression node
 *
 * This is code that is common to all variants of expression-fixing.
 * We must look up operator opcode info for OpExpr and related nodes,
 * add OIDs from regclass Const nodes into root->glob->relationOids, and
 * add catalog TIDs for user-defined functions into root->glob->invalItems.
 *
 * We assume it's okay to update opcode info in-place.  So this could possibly
 * scribble on the planner's input data structures, but it's OK.
 */
static void
fix_expr_common(PlannerInfo *root, Node *node)
{
	/* We assume callers won't call us on a NULL pointer */
	if (IsA(node, Aggref))
	{
		record_plan_function_dependency(root,
										((Aggref *) node)->aggfnoid);
	}
	else if (IsA(node, WindowFunc))
	{
		record_plan_function_dependency(root,
										((WindowFunc *) node)->winfnoid);
	}
	else if (IsA(node, FuncExpr))
	{
		record_plan_function_dependency(root,
										((FuncExpr *) node)->funcid);
	}
	else if (IsA(node, OpExpr))
	{
		set_opfuncid((OpExpr *) node);
		record_plan_function_dependency(root,
										((OpExpr *) node)->opfuncid);
	}
	else if (IsA(node, DistinctExpr))
	{
		set_opfuncid((OpExpr *) node);	/* rely on struct equivalence */
		record_plan_function_dependency(root,
										((DistinctExpr *) node)->opfuncid);
	}
	else if (IsA(node, NullIfExpr))
	{
		set_opfuncid((OpExpr *) node);	/* rely on struct equivalence */
		record_plan_function_dependency(root,
										((NullIfExpr *) node)->opfuncid);
	}
	else if (IsA(node, ScalarArrayOpExpr))
	{
		set_sa_opfuncid((ScalarArrayOpExpr *) node);
		record_plan_function_dependency(root,
									 ((ScalarArrayOpExpr *) node)->opfuncid);
	}
	else if (IsA(node, ArrayCoerceExpr))
	{
		if (OidIsValid(((ArrayCoerceExpr *) node)->elemfuncid))
			record_plan_function_dependency(root,
									 ((ArrayCoerceExpr *) node)->elemfuncid);
	}
	else if (IsA(node, Const))
	{
		Const	   *con = (Const *) node;

		/* Check for regclass reference */
		if (ISREGCLASSCONST(con))
			root->glob->relationOids =
				lappend_oid(root->glob->relationOids,
							DatumGetObjectId(con->constvalue));
	}
}

/*
 * fix_scan_expr
 *		Do set_plan_references processing on a scan-level expression
 *
 * This consists of incrementing all Vars' varnos by rtoffset,
 * looking up operator opcode info for OpExpr and related nodes,
 * and adding OIDs from regclass Const nodes into root->glob->relationOids.
 */
static Node *
fix_scan_expr(PlannerInfo *root, Node *node, int rtoffset)
{
	fix_scan_expr_context context;

	context.root = root;
	context.rtoffset = rtoffset;

	if (rtoffset != 0 || root->glob->lastPHId != 0)
	{
		return fix_scan_expr_mutator(node, &context);
	}
	else
	{
		/*
		 * If rtoffset == 0, we don't need to change any Vars, and if there
		 * are no placeholders anywhere we won't need to remove them.  Then
		 * it's OK to just scribble on the input node tree instead of copying
		 * (since the only change, filling in any unset opfuncid fields, is
		 * harmless).  This saves just enough cycles to be noticeable on
		 * trivial queries.
		 */
		(void) fix_scan_expr_walker(node, &context);
		return node;
	}
}

static Node *
fix_scan_expr_mutator(Node *node, fix_scan_expr_context *context)
{
	if (node == NULL)
		return NULL;
	if (IsA(node, Var))
	{
		Var		   *var = copyVar((Var *) node);

		Assert(var->varlevelsup == 0);

		/*
		 * We should not see any Vars marked INNER_VAR or OUTER_VAR.  But an
		 * indexqual expression could contain INDEX_VAR Vars.
		 */
		Assert(var->varno != INNER_VAR);
		Assert(var->varno != OUTER_VAR);
		if (!IS_SPECIAL_VARNO(var->varno))
			var->varno += context->rtoffset;
		if (var->varnoold > 0)
			var->varnoold += context->rtoffset;
		return (Node *) var;
	}
	if (IsA(node, CurrentOfExpr))
	{
		CurrentOfExpr *cexpr = (CurrentOfExpr *) copyObject(node);

		Assert(cexpr->cvarno != INNER_VAR);
		Assert(cexpr->cvarno != OUTER_VAR);
		if (!IS_SPECIAL_VARNO(cexpr->cvarno))
			cexpr->cvarno += context->rtoffset;
		return (Node *) cexpr;
	}
	if (IsA(node, PlaceHolderVar))
	{
		/* At scan level, we should always just evaluate the contained expr */
		PlaceHolderVar *phv = (PlaceHolderVar *) node;

		return fix_scan_expr_mutator((Node *) phv->phexpr, context);
	}
	fix_expr_common(context->root, node);
	return expression_tree_mutator(node, fix_scan_expr_mutator,
								   (void *) context);
}

static bool
fix_scan_expr_walker(Node *node, fix_scan_expr_context *context)
{
	if (node == NULL)
		return false;
	Assert(!IsA(node, PlaceHolderVar));
	fix_expr_common(context->root, node);
	return expression_tree_walker(node, fix_scan_expr_walker,
								  (void *) context);
}

/*
 * set_join_references
 *	  Modify the target list and quals of a join node to reference its
 *	  subplans, by setting the varnos to OUTER_VAR or INNER_VAR and setting
 *	  attno values to the result domain number of either the corresponding
 *	  outer or inner join tuple item.  Also perform opcode lookup for these
 *	  expressions. and add regclass OIDs to root->glob->relationOids.
 */
static void
set_join_references(PlannerInfo *root, Join *join, int rtoffset)
{
	Plan	   *outer_plan = join->plan.lefttree;
	Plan	   *inner_plan = join->plan.righttree;
	indexed_tlist *outer_itlist;
	indexed_tlist *inner_itlist;

	outer_itlist = build_tlist_index(outer_plan->targetlist);
	inner_itlist = build_tlist_index(inner_plan->targetlist);

	/* All join plans have tlist, qual, and joinqual */
	join->plan.targetlist = fix_join_expr(root,
										  join->plan.targetlist,
										  outer_itlist,
										  inner_itlist,
										  (Index) 0,
										  rtoffset);
	join->plan.qual = fix_join_expr(root,
									join->plan.qual,
									outer_itlist,
									inner_itlist,
									(Index) 0,
									rtoffset);
	join->joinqual = fix_join_expr(root,
								   join->joinqual,
								   outer_itlist,
								   inner_itlist,
								   (Index) 0,
								   rtoffset);

	/* Now do join-type-specific stuff */
	if (IsA(join, NestLoop))
	{
		NestLoop   *nl = (NestLoop *) join;
		ListCell   *lc;

		foreach(lc, nl->nestParams)
		{
			NestLoopParam *nlp = (NestLoopParam *) lfirst(lc);

			nlp->paramval = (Var *) fix_upper_expr(root,
												   (Node *) nlp->paramval,
												   outer_itlist,
												   OUTER_VAR,
												   rtoffset);
		}
	}
	else if (IsA(join, MergeJoin))
	{
		MergeJoin  *mj = (MergeJoin *) join;

		mj->mergeclauses = fix_join_expr(root,
										 mj->mergeclauses,
										 outer_itlist,
										 inner_itlist,
										 (Index) 0,
										 rtoffset);
	}
	else if (IsA(join, HashJoin))
	{
		HashJoin   *hj = (HashJoin *) join;

		hj->hashclauses = fix_join_expr(root,
										hj->hashclauses,
										outer_itlist,
										inner_itlist,
										(Index) 0,
										rtoffset);
	}

	pfree(outer_itlist);
	pfree(inner_itlist);
}

/*
 * set_upper_references
 *	  Update the targetlist and quals of an upper-level plan node
 *	  to refer to the tuples returned by its lefttree subplan.
 *	  Also perform opcode lookup for these expressions, and
 *	  add regclass OIDs to root->glob->relationOids.
 *
 * This is used for single-input plan types like Agg, Group, Result.
 *
 * In most cases, we have to match up individual Vars in the tlist and
 * qual expressions with elements of the subplan's tlist (which was
 * generated by flatten_tlist() from these selfsame expressions, so it
 * should have all the required variables).  There is an important exception,
 * however: GROUP BY and ORDER BY expressions will have been pushed into the
 * subplan tlist unflattened.  If these values are also needed in the output
 * then we want to reference the subplan tlist element rather than recomputing
 * the expression.
 */
static void
set_upper_references(PlannerInfo *root, Plan *plan, int rtoffset)
{
	Plan	   *subplan = plan->lefttree;
	indexed_tlist *subplan_itlist;
	List	   *output_targetlist;
	ListCell   *l;

	subplan_itlist = build_tlist_index(subplan->targetlist);

	output_targetlist = NIL;
	foreach(l, plan->targetlist)
	{
		TargetEntry *tle = (TargetEntry *) lfirst(l);
		Node	   *newexpr;

		/* If it's a non-Var sort/group item, first try to match by sortref */
		if (tle->ressortgroupref != 0 && !IsA(tle->expr, Var))
		{
			newexpr = (Node *)
				search_indexed_tlist_for_sortgroupref((Node *) tle->expr,
													  tle->ressortgroupref,
													  subplan_itlist,
													  OUTER_VAR);
			if (!newexpr)
				newexpr = fix_upper_expr(root,
										 (Node *) tle->expr,
										 subplan_itlist,
										 OUTER_VAR,
										 rtoffset);
		}
		else
			newexpr = fix_upper_expr(root,
									 (Node *) tle->expr,
									 subplan_itlist,
									 OUTER_VAR,
									 rtoffset);
		tle = flatCopyTargetEntry(tle);
		tle->expr = (Expr *) newexpr;
		output_targetlist = lappend(output_targetlist, tle);
	}
	plan->targetlist = output_targetlist;

	plan->qual = (List *)
		fix_upper_expr(root,
					   (Node *) plan->qual,
					   subplan_itlist,
					   OUTER_VAR,
					   rtoffset);

	pfree(subplan_itlist);
}

/*
 * set_dummy_tlist_references
 *	  Replace the targetlist of an upper-level plan node with a simple
 *	  list of OUTER_VAR references to its child.
 *
 * This is used for plan types like Sort and Append that don't evaluate
 * their targetlists.  Although the executor doesn't care at all what's in
 * the tlist, EXPLAIN needs it to be realistic.
 *
 * Note: we could almost use set_upper_references() here, but it fails for
 * Append for lack of a lefttree subplan.  Single-purpose code is faster
 * anyway.
 */
static void
set_dummy_tlist_references(Plan *plan, int rtoffset)
{
	List	   *output_targetlist;
	ListCell   *l;

	output_targetlist = NIL;
	foreach(l, plan->targetlist)
	{
		TargetEntry *tle = (TargetEntry *) lfirst(l);
		Var		   *oldvar = (Var *) tle->expr;
		Var		   *newvar;

		newvar = makeVar(OUTER_VAR,
						 tle->resno,
						 exprType((Node *) oldvar),
						 exprTypmod((Node *) oldvar),
						 exprCollation((Node *) oldvar),
						 0);
		if (IsA(oldvar, Var))
		{
			newvar->varnoold = oldvar->varno + rtoffset;
			newvar->varoattno = oldvar->varattno;
		}
		else
		{
			newvar->varnoold = 0;		/* wasn't ever a plain Var */
			newvar->varoattno = 0;
		}

		tle = flatCopyTargetEntry(tle);
		tle->expr = (Expr *) newvar;
		output_targetlist = lappend(output_targetlist, tle);
	}
	plan->targetlist = output_targetlist;

	/* We don't touch plan->qual here */
}


/*
 * build_tlist_index --- build an index data structure for a child tlist
 *
 * In most cases, subplan tlists will be "flat" tlists with only Vars,
 * so we try to optimize that case by extracting information about Vars
 * in advance.	Matching a parent tlist to a child is still an O(N^2)
 * operation, but at least with a much smaller constant factor than plain
 * tlist_member() searches.
 *
 * The result of this function is an indexed_tlist struct to pass to
 * search_indexed_tlist_for_var() or search_indexed_tlist_for_non_var().
 * When done, the indexed_tlist may be freed with a single pfree().
 */
static indexed_tlist *
build_tlist_index(List *tlist)
{
	indexed_tlist *itlist;
	tlist_vinfo *vinfo;
	ListCell   *l;

	/* Create data structure with enough slots for all tlist entries */
	itlist = (indexed_tlist *)
		palloc(offsetof(indexed_tlist, vars) +
			   list_length(tlist) * sizeof(tlist_vinfo));

	itlist->tlist = tlist;
	itlist->has_ph_vars = false;
	itlist->has_non_vars = false;

	/* Find the Vars and fill in the index array */
	vinfo = itlist->vars;
	foreach(l, tlist)
	{
		TargetEntry *tle = (TargetEntry *) lfirst(l);

		if (tle->expr && IsA(tle->expr, Var))
		{
			Var		   *var = (Var *) tle->expr;

			vinfo->varno = var->varno;
			vinfo->varattno = var->varattno;
			vinfo->resno = tle->resno;
			vinfo++;
		}
		else if (tle->expr && IsA(tle->expr, PlaceHolderVar))
			itlist->has_ph_vars = true;
		else
			itlist->has_non_vars = true;
	}

	itlist->num_vars = (vinfo - itlist->vars);

	return itlist;
}

/*
 * build_tlist_index_other_vars --- build a restricted tlist index
 *
 * This is like build_tlist_index, but we only index tlist entries that
 * are Vars belonging to some rel other than the one specified.  We will set
 * has_ph_vars (allowing PlaceHolderVars to be matched), but not has_non_vars
 * (so nothing other than Vars and PlaceHolderVars can be matched).
 */
static indexed_tlist *
build_tlist_index_other_vars(List *tlist, Index ignore_rel)
{
	indexed_tlist *itlist;
	tlist_vinfo *vinfo;
	ListCell   *l;

	/* Create data structure with enough slots for all tlist entries */
	itlist = (indexed_tlist *)
		palloc(offsetof(indexed_tlist, vars) +
			   list_length(tlist) * sizeof(tlist_vinfo));

	itlist->tlist = tlist;
	itlist->has_ph_vars = false;
	itlist->has_non_vars = false;

	/* Find the desired Vars and fill in the index array */
	vinfo = itlist->vars;
	foreach(l, tlist)
	{
		TargetEntry *tle = (TargetEntry *) lfirst(l);

		if (tle->expr && IsA(tle->expr, Var))
		{
			Var		   *var = (Var *) tle->expr;

			if (var->varno != ignore_rel)
			{
				vinfo->varno = var->varno;
				vinfo->varattno = var->varattno;
				vinfo->resno = tle->resno;
				vinfo++;
			}
		}
		else if (tle->expr && IsA(tle->expr, PlaceHolderVar))
			itlist->has_ph_vars = true;
	}

	itlist->num_vars = (vinfo - itlist->vars);

	return itlist;
}

/*
 * search_indexed_tlist_for_var --- find a Var in an indexed tlist
 *
 * If a match is found, return a copy of the given Var with suitably
 * modified varno/varattno (to wit, newvarno and the resno of the TLE entry).
 * Also ensure that varnoold is incremented by rtoffset.
 * If no match, return NULL.
 */
static Var *
search_indexed_tlist_for_var(Var *var, indexed_tlist *itlist,
							 Index newvarno, int rtoffset)
{
	Index		varno = var->varno;
	AttrNumber	varattno = var->varattno;
	tlist_vinfo *vinfo;
	int			i;

	vinfo = itlist->vars;
	i = itlist->num_vars;
	while (i-- > 0)
	{
		if (vinfo->varno == varno && vinfo->varattno == varattno)
		{
			/* Found a match */
			Var		   *newvar = copyVar(var);

			newvar->varno = newvarno;
			newvar->varattno = vinfo->resno;
			if (newvar->varnoold > 0)
				newvar->varnoold += rtoffset;
			return newvar;
		}
		vinfo++;
	}
	return NULL;				/* no match */
}

/*
 * search_indexed_tlist_for_non_var --- find a non-Var in an indexed tlist
 *
 * If a match is found, return a Var constructed to reference the tlist item.
 * If no match, return NULL.
 *
 * NOTE: it is a waste of time to call this unless itlist->has_ph_vars or
 * itlist->has_non_vars
 */
static Var *
search_indexed_tlist_for_non_var(Node *node,
								 indexed_tlist *itlist, Index newvarno)
{
	TargetEntry *tle;

	tle = tlist_member(node, itlist->tlist);
	if (tle)
	{
		/* Found a matching subplan output expression */
		Var		   *newvar;

		newvar = makeVarFromTargetEntry(newvarno, tle);
		newvar->varnoold = 0;	/* wasn't ever a plain Var */
		newvar->varoattno = 0;
		return newvar;
	}
	return NULL;				/* no match */
}

/*
 * search_indexed_tlist_for_sortgroupref --- find a sort/group expression
 *		(which is assumed not to be just a Var)
 *
 * If a match is found, return a Var constructed to reference the tlist item.
 * If no match, return NULL.
 *
 * This is needed to ensure that we select the right subplan TLE in cases
 * where there are multiple textually-equal()-but-volatile sort expressions.
 * And it's also faster than search_indexed_tlist_for_non_var.
 */
static Var *
search_indexed_tlist_for_sortgroupref(Node *node,
									  Index sortgroupref,
									  indexed_tlist *itlist,
									  Index newvarno)
{
	ListCell   *lc;

	foreach(lc, itlist->tlist)
	{
		TargetEntry *tle = (TargetEntry *) lfirst(lc);

		/* The equal() check should be redundant, but let's be paranoid */
		if (tle->ressortgroupref == sortgroupref &&
			equal(node, tle->expr))
		{
			/* Found a matching subplan output expression */
			Var		   *newvar;

			newvar = makeVarFromTargetEntry(newvarno, tle);
			newvar->varnoold = 0;		/* wasn't ever a plain Var */
			newvar->varoattno = 0;
			return newvar;
		}
	}
	return NULL;				/* no match */
}

/*
 * fix_join_expr
 *	   Create a new set of targetlist entries or join qual clauses by
 *	   changing the varno/varattno values of variables in the clauses
 *	   to reference target list values from the outer and inner join
 *	   relation target lists.  Also perform opcode lookup and add
 *	   regclass OIDs to root->glob->relationOids.
 *
 * This is used in two different scenarios: a normal join clause, where all
 * the Vars in the clause *must* be replaced by OUTER_VAR or INNER_VAR
 * references; and a RETURNING clause, which may contain both Vars of the
 * target relation and Vars of other relations.  In the latter case we want
 * to replace the other-relation Vars by OUTER_VAR references, while leaving
 * target Vars alone.
 *
 * For a normal join, acceptable_rel should be zero so that any failure to
 * match a Var will be reported as an error.  For the RETURNING case, pass
 * inner_itlist = NULL and acceptable_rel = the ID of the target relation.
 *
 * 'clauses' is the targetlist or list of join clauses
 * 'outer_itlist' is the indexed target list of the outer join relation
 * 'inner_itlist' is the indexed target list of the inner join relation,
 *		or NULL
 * 'acceptable_rel' is either zero or the rangetable index of a relation
 *		whose Vars may appear in the clause without provoking an error
 * 'rtoffset': how much to increment varnoold by
 *
 * Returns the new expression tree.  The original clause structure is
 * not modified.
 */
static List *
fix_join_expr(PlannerInfo *root,
			  List *clauses,
			  indexed_tlist *outer_itlist,
			  indexed_tlist *inner_itlist,
			  Index acceptable_rel,
			  int rtoffset)
{
	fix_join_expr_context context;

	context.root = root;
	context.outer_itlist = outer_itlist;
	context.inner_itlist = inner_itlist;
	context.acceptable_rel = acceptable_rel;
	context.rtoffset = rtoffset;
	return (List *) fix_join_expr_mutator((Node *) clauses, &context);
}

static Node *
fix_join_expr_mutator(Node *node, fix_join_expr_context *context)
{
	Var		   *newvar;

	if (node == NULL)
		return NULL;
	if (IsA(node, Var))
	{
		Var		   *var = (Var *) node;

		/* First look for the var in the input tlists */
		newvar = search_indexed_tlist_for_var(var,
											  context->outer_itlist,
											  OUTER_VAR,
											  context->rtoffset);
		if (newvar)
			return (Node *) newvar;
		if (context->inner_itlist)
		{
			newvar = search_indexed_tlist_for_var(var,
												  context->inner_itlist,
												  INNER_VAR,
												  context->rtoffset);
			if (newvar)
				return (Node *) newvar;
		}

		/* If it's for acceptable_rel, adjust and return it */
		if (var->varno == context->acceptable_rel)
		{
			var = copyVar(var);
			if (var->varnoold > 0)
				var->varnoold += context->rtoffset;
			return (Node *) var;
		}

		/* No referent found for Var */
		elog(ERROR, "variable not found in subplan target lists");
	}
	if (IsA(node, PlaceHolderVar))
	{
		PlaceHolderVar *phv = (PlaceHolderVar *) node;

		/* See if the PlaceHolderVar has bubbled up from a lower plan node */
		if (context->outer_itlist->has_ph_vars)
		{
			newvar = search_indexed_tlist_for_non_var((Node *) phv,
													  context->outer_itlist,
													  OUTER_VAR);
			if (newvar)
				return (Node *) newvar;
		}
		if (context->inner_itlist && context->inner_itlist->has_ph_vars)
		{
			newvar = search_indexed_tlist_for_non_var((Node *) phv,
													  context->inner_itlist,
													  INNER_VAR);
			if (newvar)
				return (Node *) newvar;
		}

		/* If not supplied by input plans, evaluate the contained expr */
		return fix_join_expr_mutator((Node *) phv->phexpr, context);
	}
	/* Try matching more complex expressions too, if tlists have any */
	if (context->outer_itlist->has_non_vars)
	{
		newvar = search_indexed_tlist_for_non_var(node,
												  context->outer_itlist,
												  OUTER_VAR);
		if (newvar)
			return (Node *) newvar;
	}
	if (context->inner_itlist && context->inner_itlist->has_non_vars)
	{
		newvar = search_indexed_tlist_for_non_var(node,
												  context->inner_itlist,
												  INNER_VAR);
		if (newvar)
			return (Node *) newvar;
	}
	fix_expr_common(context->root, node);
	return expression_tree_mutator(node,
								   fix_join_expr_mutator,
								   (void *) context);
}

/*
 * fix_upper_expr
 *		Modifies an expression tree so that all Var nodes reference outputs
 *		of a subplan.  Also performs opcode lookup, and adds regclass OIDs to
 *		root->glob->relationOids.
 *
 * This is used to fix up target and qual expressions of non-join upper-level
 * plan nodes, as well as index-only scan nodes.
 *
 * An error is raised if no matching var can be found in the subplan tlist
 * --- so this routine should only be applied to nodes whose subplans'
 * targetlists were generated via flatten_tlist() or some such method.
 *
 * If itlist->has_non_vars is true, then we try to match whole subexpressions
 * against elements of the subplan tlist, so that we can avoid recomputing
 * expressions that were already computed by the subplan.  (This is relatively
 * expensive, so we don't want to try it in the common case where the
 * subplan tlist is just a flattened list of Vars.)
 *
 * 'node': the tree to be fixed (a target item or qual)
 * 'subplan_itlist': indexed target list for subplan (or index)
 * 'newvarno': varno to use for Vars referencing tlist elements
 * 'rtoffset': how much to increment varnoold by
 *
 * The resulting tree is a copy of the original in which all Var nodes have
 * varno = newvarno, varattno = resno of corresponding targetlist element.
 * The original tree is not modified.
 */
static Node *
fix_upper_expr(PlannerInfo *root,
			   Node *node,
			   indexed_tlist *subplan_itlist,
			   Index newvarno,
			   int rtoffset)
{
	fix_upper_expr_context context;

	context.root = root;
	context.subplan_itlist = subplan_itlist;
	context.newvarno = newvarno;
	context.rtoffset = rtoffset;
	return fix_upper_expr_mutator(node, &context);
}

static Node *
fix_upper_expr_mutator(Node *node, fix_upper_expr_context *context)
{
	Var		   *newvar;

	if (node == NULL)
		return NULL;
	if (IsA(node, Var))
	{
		Var		   *var = (Var *) node;

		newvar = search_indexed_tlist_for_var(var,
											  context->subplan_itlist,
											  context->newvarno,
											  context->rtoffset);
		if (!newvar)
			elog(ERROR, "variable not found in subplan target list");
		return (Node *) newvar;
	}
	if (IsA(node, PlaceHolderVar))
	{
		PlaceHolderVar *phv = (PlaceHolderVar *) node;

		/* See if the PlaceHolderVar has bubbled up from a lower plan node */
		if (context->subplan_itlist->has_ph_vars)
		{
			newvar = search_indexed_tlist_for_non_var((Node *) phv,
													  context->subplan_itlist,
													  context->newvarno);
			if (newvar)
				return (Node *) newvar;
		}
		/* If not supplied by input plan, evaluate the contained expr */
		return fix_upper_expr_mutator((Node *) phv->phexpr, context);
	}
	/* Try matching more complex expressions too, if tlist has any */
	if (context->subplan_itlist->has_non_vars)
	{
		newvar = search_indexed_tlist_for_non_var(node,
												  context->subplan_itlist,
												  context->newvarno);
		if (newvar)
			return (Node *) newvar;
	}
	fix_expr_common(context->root, node);
	return expression_tree_mutator(node,
								   fix_upper_expr_mutator,
								   (void *) context);
}

/*
 * set_returning_clause_references
 *		Perform setrefs.c's work on a RETURNING targetlist
 *
 * If the query involves more than just the result table, we have to
 * adjust any Vars that refer to other tables to reference junk tlist
 * entries in the top subplan's targetlist.  Vars referencing the result
 * table should be left alone, however (the executor will evaluate them
 * using the actual heap tuple, after firing triggers if any).	In the
 * adjusted RETURNING list, result-table Vars will still have their
 * original varno, but Vars for other rels will have varno OUTER_VAR.
 *
 * We also must perform opcode lookup and add regclass OIDs to
 * root->glob->relationOids.
 *
 * 'rlist': the RETURNING targetlist to be fixed
 * 'topplan': the top subplan node that will be just below the ModifyTable
 *		node (note it's not yet passed through set_plan_references)
 * 'resultRelation': RT index of the associated result relation
 *
 * Note: we assume that result relations will have rtoffset zero, that is,
 * they are not coming from a subplan.
 */
List *
set_returning_clause_references(PlannerInfo *root,
								List *rlist,
								Plan *topplan,
								Index resultRelation)
{
	indexed_tlist *itlist;

	/*
	 * We can perform the desired Var fixup by abusing the fix_join_expr
	 * machinery that formerly handled inner indexscan fixup.  We search the
	 * top plan's targetlist for Vars of non-result relations, and use
	 * fix_join_expr to convert RETURNING Vars into references to those tlist
	 * entries, while leaving result-rel Vars as-is.
	 *
	 * PlaceHolderVars will also be sought in the targetlist, but no
	 * more-complex expressions will be.  Note that it is not possible for a
	 * PlaceHolderVar to refer to the result relation, since the result is
	 * never below an outer join.  If that case could happen, we'd have to be
	 * prepared to pick apart the PlaceHolderVar and evaluate its contained
	 * expression instead.
	 */
	itlist = build_tlist_index_other_vars(topplan->targetlist, resultRelation);

	rlist = fix_join_expr(root,
						  rlist,
						  itlist,
						  NULL,
						  resultRelation,
						  0);

	pfree(itlist);

	return rlist;
}

/*****************************************************************************
 *					OPERATOR REGPROC LOOKUP
 *****************************************************************************/

/*
 * fix_opfuncids
 *	  Calculate opfuncid field from opno for each OpExpr node in given tree.
 *	  The given tree can be anything expression_tree_walker handles.
 *
 * The argument is modified in-place.  (This is OK since we'd want the
 * same change for any node, even if it gets visited more than once due to
 * shared structure.)
 */
void
fix_opfuncids(Node *node)
{
	/* This tree walk requires no special setup, so away we go... */
	fix_opfuncids_walker(node, NULL);
}

static bool
fix_opfuncids_walker(Node *node, void *context)
{
	if (node == NULL)
		return false;
	if (IsA(node, OpExpr))
		set_opfuncid((OpExpr *) node);
	else if (IsA(node, DistinctExpr))
		set_opfuncid((OpExpr *) node);	/* rely on struct equivalence */
	else if (IsA(node, NullIfExpr))
		set_opfuncid((OpExpr *) node);	/* rely on struct equivalence */
	else if (IsA(node, ScalarArrayOpExpr))
		set_sa_opfuncid((ScalarArrayOpExpr *) node);
	return expression_tree_walker(node, fix_opfuncids_walker, context);
}

/*
 * set_opfuncid
 *		Set the opfuncid (procedure OID) in an OpExpr node,
 *		if it hasn't been set already.
 *
 * Because of struct equivalence, this can also be used for
 * DistinctExpr and NullIfExpr nodes.
 */
void
set_opfuncid(OpExpr *opexpr)
{
	if (opexpr->opfuncid == InvalidOid)
		opexpr->opfuncid = get_opcode(opexpr->opno);
}

/*
 * set_sa_opfuncid
 *		As above, for ScalarArrayOpExpr nodes.
 */
void
set_sa_opfuncid(ScalarArrayOpExpr *opexpr)
{
	if (opexpr->opfuncid == InvalidOid)
		opexpr->opfuncid = get_opcode(opexpr->opno);
}

/*****************************************************************************
 *					QUERY DEPENDENCY MANAGEMENT
 *****************************************************************************/

/*
 * record_plan_function_dependency
 *		Mark the current plan as depending on a particular function.
 *
 * This is exported so that the function-inlining code can record a
 * dependency on a function that it's removed from the plan tree.
 */
void
record_plan_function_dependency(PlannerInfo *root, Oid funcid)
{
	/*
	 * For performance reasons, we don't bother to track built-in functions;
	 * we just assume they'll never change (or at least not in ways that'd
	 * invalidate plans using them).  For this purpose we can consider a
	 * built-in function to be one with OID less than FirstBootstrapObjectId.
	 * Note that the OID generator guarantees never to generate such an OID
	 * after startup, even at OID wraparound.
	 */
	if (funcid >= (Oid) FirstBootstrapObjectId)
	{
		PlanInvalItem *inval_item = makeNode(PlanInvalItem);

		/*
		 * It would work to use any syscache on pg_proc, but the easiest is
		 * PROCOID since we already have the function's OID at hand.  Note
		 * that plancache.c knows we use PROCOID.  Also, we're perhaps
		 * assuming more than we should about how CatalogCacheComputeHashValue
		 * computes hash values...
		 */
		inval_item->cacheId = PROCOID;
		inval_item->hashValue =
			DatumGetUInt32(DirectFunctionCall1(hashoid,
											   ObjectIdGetDatum(funcid)));

		root->glob->invalItems = lappend(root->glob->invalItems, inval_item);
	}
}

/*
 * extract_query_dependencies
 *		Given a not-yet-planned query or queries (i.e. a Query node or list
 *		of Query nodes), extract dependencies just as set_plan_references
 *		would do.
 *
 * This is needed by plancache.c to handle invalidation of cached unplanned
 * queries.
 */
void
extract_query_dependencies(Node *query,
						   List **relationOids,
						   List **invalItems)
{
	PlannerGlobal glob;
	PlannerInfo root;

	/* Make up dummy planner state so we can use this module's machinery */
	MemSet(&glob, 0, sizeof(glob));
	glob.type = T_PlannerGlobal;
	glob.relationOids = NIL;
	glob.invalItems = NIL;

	MemSet(&root, 0, sizeof(root));
	root.type = T_PlannerInfo;
	root.glob = &glob;

	(void) extract_query_dependencies_walker(query, &root);

	*relationOids = glob.relationOids;
	*invalItems = glob.invalItems;
}

static bool
extract_query_dependencies_walker(Node *node, PlannerInfo *context)
{
	if (node == NULL)
		return false;
	Assert(!IsA(node, PlaceHolderVar));
	/* Extract function dependencies and check for regclass Consts */
	fix_expr_common(context, node);
	if (IsA(node, Query))
	{
		Query	   *query = (Query *) node;
		ListCell   *lc;

		if (query->commandType == CMD_UTILITY)
		{
			/* Ignore utility statements, except EXPLAIN */
			if (IsA(query->utilityStmt, ExplainStmt))
			{
				query = (Query *) ((ExplainStmt *) query->utilityStmt)->query;
				Assert(IsA(query, Query));
				Assert(query->commandType != CMD_UTILITY);
			}
			else
				return false;
		}

		/* Collect relation OIDs in this Query's rtable */
		foreach(lc, query->rtable)
		{
			RangeTblEntry *rte = (RangeTblEntry *) lfirst(lc);

			if (rte->rtekind == RTE_RELATION)
				context->glob->relationOids =
					lappend_oid(context->glob->relationOids, rte->relid);
		}

		/* And recurse into the query's subexpressions */
		return query_tree_walker(query, extract_query_dependencies_walker,
								 (void *) context, 0);
	}
	return expression_tree_walker(node, extract_query_dependencies_walker,
								  (void *) context);
}
